Snapper Lawn Aerator 4219 User Manual

Attachment  
Illustrated  
Parts List  
Attachment  
Mfg. No.  
1694499  
Description  
Catcher, Turbo Clean Sweep Triple  
MANUFACTURING, INC.  
500 N. Spring Street / PO Box 997  
Port Washington, WI 53074-0997 USA  
1731896  
07/2005  
Part No.:  
Rev.  
TP 400-4219-00-AT-SMA  
© Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA.  
Cover & Bag Group - Triple  
REF NO PART NO. QTY. DESCRIPTION  
1
1717025  
1
COVER & SCREEN ASSEMBLY, Grass Collector Complete (Incl. Ref. Nos. 2, 3, 4, 5,  
6, 7, 8, 9, 10, 11, 12 & 13)  
2
3
1717026  
1960241  
1717067  
2825160  
1910531  
1667248  
1704405  
1716970  
1717041  
1717524  
1716968  
1716972  
1719807  
1921333  
1919326  
1925003  
1919438  
1717039  
1716973  
1716966  
1725969  
1717038  
1720875  
1720945  
1672344  
1928707  
1960074  
1921332  
1703764  
1931333  
1703807  
1917372  
1917356  
1672023  
1703855  
1675707  
1717082  
1
9
COVER, Grass Catcher Black Plastic  
RIVET, Pop, .25OD .500L Steal,Steal Stem .50HD Black  
PLATE & TUBE ASSEMBLY, Hinge  
4
3
5
25  
16  
6
RIVET, Pop, .188D .527L Steal,Steal Stem .37HD Dia.  
WASHER, Rivet, .188 (0.20ID x 0.50OD x .05TH) Black  
CLIP, Canoe .437LG .375DIA  
6
7
8
1
DECAL, WARNING Do Not Open Cover  
CLAMP, Screen 16GA 40.0LG  
9
1
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
1
SCREEN, Black Poly, 19.5 x 45.0  
1
CLAMP, Seal, .060THK .75WD 48.00LG  
SEAL, Black Rubber, .075 x 3.00 x 48.0  
ANGLE, Screen, 14GA 48"LG  
1
1
1
CHUTE, Grass Collector Upper, 5.76ID 21.7L Scribed  
CAPSCREW, Hex Head, 5/16-18 x 1 G5 Black  
WASHER, 5/16 (0.34ID x 0.75OD x .06THK) Black  
CAPSCREW, Hex Washer Head Taptite, 1/4-20 x 1/2 Black  
NUT, Hex Lock ESNA Light, 5/16-18NC-3B Black  
DEFLECTOR, Black Plastic Grass Collector  
CHANNEL & BRACKET ASSEMBLY, Support  
PLATE & BRACES ASSEMBLY, 3 Bag Grass Catcher  
COVER, Inlet, .125THK 8.12 x 8.12 Plexiglass  
DUCT, Inlet Black Plastic Grass Collector  
BRACKET, Hinge 3 Bag, 12GA 6.00LG with Point  
BRACKET, Hinge 3 Bag, 12GA 2.75LG  
PIN, Round Head Drilled, 3/8 x 2-3/4 Black  
RIVET, Pop, .188D .277L AL, AL Stem .37HD Black  
CLIP, Hair Pin, .093DIA Spring Wire 1.625LG Black  
CAPSCREW, Hex Head, 5/16-18 x 3/4 G5 Black  
BAG, Grass, 15.4 x 16 x 22.5 White Poly Cloth  
CARRIAGE BOLT, 5/16-18 x 3/4 G5 Black  
HANGER, Grass Bag Hoop  
4
12  
3
8
1
1
1
1
1
2
1
3
16  
3
4
1
2
1
2
NUT, Hex 5/16-18 NC-2B Black  
2
LOCKWASHER, Spring 3/8 Black  
1
CLAMP, Wire Diameter 1/2 (2), .344 Holes (3)  
HOOP, 1/2 ROD 16.12 x 16.75  
1
1
EDGING, 13.50LG PVC Tube White  
1
SEAL, Black Plastic 73"  
Footnotes  
The above parts group applies to the following Mfg. Nos.:  
1694499 - Catcher  
© Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved.  
2
TP 400-4219-00-AT-SMA  
Front Weight Carrier Group  
986507  
NOTE: Unless noted otherwise,  
use the standard hardware torque  
specification chart.  
3  
4  
2  
1
2  
3  
5
6
The above parts group applies to the following Mfg. Nos.:  
1694499 - Catcher  
© Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved.  
3
TP 400-4219-00-AT-SMA  
Front Weight Carrier Group  
REF NO PART NO. QTY. DESCRIPTION  
1
2
3
4
5
6
5049082  
1921333  
1919326  
1927557  
5049143  
2176012  
1
4
4
4
1
2
HOLDER ASSEMBL, Weight  
CAPSCREW, Hex Head, 5/16-18 x 1 G5 Black  
WASHER, 5/16 (0.34ID x 0.75OD x .06THK) Black  
NUT, Hex Flange Whiz Lock, 5/16-18 Large Black  
ROD, Retaining, 1/2 x 13-3/4LG  
RETAINER, Pin, Spring  
Footnotes  
The above parts group applies to the following Mfg. Nos.:  
1694499 - Catcher  
© Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved.  
4
TP 400-4219-00-AT-SMA  
Mount Group  
986508  
NOTE: Unless noted otherwise,  
use the standard hardware torque  
specification chart.  
Torque to•  
55-70 ft. lbs.  
10  
24  
11  
44"  
25  
29  
49  
35  
21  
18  
12  
1
2
50"  
20  
17  
26  
27  
19  
33  
22  
2
Existing Pulley  
& Spacer  
1
16  
15  
8
9
48  
23  
3
8
14  
13  
4
7
39  
36  
32  
37  
38  
31  
30  
22  
8
1
6
5
Existing  
Hardware•  
47  
46  
45  
34  
17  
8
44  
38  
22  
28  
43  
Existing Hardware•  
(Bolt, Washer, Lockwasher, & Nut)  
42  
41  
Existing Hardware•  
40  
The above parts group applies to the following Mfg. Nos.:  
1694499 - Catcher  
© Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved.  
5
TP 400-4219-00-AT-SMA  
Mount Group  
REF NO PART NO. QTY. DESCRIPTION  
1
2
1921333  
1919326  
1718304  
1933896  
1718295  
1960404  
1722546  
1931277  
1919438  
5049171  
1717291  
5049170  
1916950  
1916965  
1704768  
1724373  
1924940  
1923701  
1714817  
2172845  
1921221  
1917356  
1710703  
1713523  
1603592  
1709941  
1713623  
5049145  
5049088  
1960318  
1919381  
1705064  
2108717  
1922755  
1705142  
1923362  
1679163  
1917372  
1704982  
1960223  
1659867  
1666294  
1705308  
1923325  
4
3
1
4
1
4
1
6
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
2
CAPSCREW, Hex Head, 5/16-18 x 1 G5 Black  
WASHER, 5/16 (0.34ID x 0.75OD x .06THK) Black  
SUPPORT, Belt Cover 10GA 1.0WD 3.0LG  
NUT, Hex Lock, 10-24 with Nylon Insert NC3B Black  
ROD, .375DIA 22.0LG  
3
4
5
6
SCREW, Truss Head Phillips, #10-24 x 3/4 Black  
PIVOT & BRACKETS ASSEMBLY, 38, 44 & 50"  
NUT, Hex Flange Whiz Lock, 5/16-18 Small Black  
NUT, Hex Lock ESNA Light, 5/16-18NC-3B Black  
COVER, Belt 44" 12GA  
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
Footnotes  
DECAL, WARNING Sheild & Mower Deflector  
COVER, Belt 50" 12GA  
NUT, Hex 3/8-16 NC-2B Black  
LOCKWASHER, Spring 3/8  
BRACKET, Z .164TH 5.88WD 3.21LG  
BRACKET, L 12GA 1.24WD 2.24LG 2.28LG  
WASHER, 3/8 (0.41ID x 0.87OD x .08THK) Black  
CAPSCREW, Hex Head, 3/8-16 x 2 G5 Black  
PULLEY, Idler, 2.75OD 0.380ID 0.50W  
STOP, Belt, .188WIRE 1.750,2.250 Black  
CAPSCREW, Hex Head, 5/16-18 x 1-1/2 G5 Black  
LOCKWASHER, Spring 5/16 Black  
SPACER, 0.328ID x 0.499OD x 0.625LG Powdered Metal  
NUT, Sleeve, 9/16-18 x 3/4INT x 1.34LG Black  
WASHER, Bellville, 0.88ID x 1.75OD x .08TH Black  
PULLEY, 04.30OD 1.000ID 0.579 Groove 9GA  
HUB, .79ID x 1.5OD x .73LG Metafusion  
PLATE, Spring Support 10GA  
SPACER, 0.812ID x 1.75OD x 0.50LG  
CAPSCREW, Hex Head, 5/16-18 x 2-1/2 G5 Flat Black  
WASHER, 5/16 (0.34ID x 1.00OD x .13THK) Black  
SPRING, Latch, .125WIRE 4.3LG Black  
SPACER, 0.390ID x 0.625OD x .265LG  
WASHER, 3/8 (0.41ID x 1.00OD x .13THK) Black  
V-BELT, 3L, 44" Mower Deck  
NUTHex Centerlock, 5/16-18 Black  
NUT & CUP ASSEMBLY, Wing, 5/16-18 E-Coat  
NUT,Hex, 5/16-18 NC-2B Black  
PLATE, Anchor  
CARRIAGE BOLT, 5/16-18 x 1-1/4 G5 Black  
BRACKET ASSEMBLY, Cutoff, 44"  
SPACER, 0.385ID x 0.668OD x 0.455LG Powdered Metal Black  
BRACKET, L 12GA 1.00WD 1.98LG 0.62LG  
CAPSCREW, Hex Head, 5/16-18 x 7/8 G5 Black  
The above parts group applies to the following Mfg. Nos.:  
1694499 - Catcher  
© Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved.  
6
TP 400-4219-00-AT-SMA  
Mount Group  
986508  
NOTE: Unless noted otherwise,  
use the standard hardware torque  
specification chart.  
Torque to•  
55-70 ft. lbs.  
10  
24  
11  
44"  
25  
29  
49  
35  
21  
18  
12  
1
2
50"  
20  
17  
26  
27  
19  
33  
22  
2
Existing Pulley  
& Spacer  
1
16  
15  
8
9
48  
23  
3
8
14  
13  
4
7
39  
36  
32  
37  
38  
31  
30  
22  
8
1
6
5
Existing  
Hardware•  
47  
46  
45  
34  
17  
8
44  
38  
22  
28  
43  
Existing Hardware•  
(Bolt, Washer, Lockwasher, & Nut)  
42  
41  
Existing Hardware•  
40  
The above parts group applies to the following Mfg. Nos.:  
1694499 - Catcher  
© Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved.  
7
TP 400-4219-00-AT-SMA  
Mount Group  
REF NO PART NO. QTY. DESCRIPTION  
45  
46  
47  
48  
49  
1931333  
5049159  
5049144  
1704983  
1707956  
1
1
1
1
1
CARRIAGE BOLT, 5/16-18 x 3/4 G5 Black  
SPRING, Compression, 0.720OD x 2.25 LG .085 Wire  
SPACER, 0.390ID x 0.75OD x 1.13 LG YELLOW  
BRACKET & PLATE ASSEMBLY, Clamp  
V-BELT, 3L, 50" Mower Deck  
Footnotes  
The above parts group applies to the following Mfg. Nos.:  
1694499 - Catcher  
© Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved.  
8
TP 400-4219-00-AT-SMA  
Tubes & Support Group - Triple  
986506  
NOTE: Unless noted otherwise,  
use the standard hardware torque  
specification chart.  
9  
8  
6
5
3
2
1
10  
2
7  
16  
5
3
4
11  
12  
14  
13  
15  
The above parts group applies to the following Mfg. Nos.:  
1694499 - Catcher  
© Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved.  
9
TP 400-4219-00-AT-SMA  
Tubes & Support Group - Triple  
REF NO PART NO. QTY. DESCRIPTION  
1
2
5049152  
1960404  
1960096  
1705063  
1933896  
5049151  
1931335  
1917356  
1917372  
1723437  
1960033  
1726968  
1717085  
1921176  
1960668  
*
1
5
5
1
5
1
4
4
4
1
1
1
1
4
4
1
CHUTE, Grass Collector Lower, Black Poly  
SCREW, Truss Head Phillips, #10, 24 x 3/4 Black  
WASHER, 3/16 (0.19ID x 0.75OD x .06THK) Black  
CLIP, Spring, 1.40 x 1.48 Open 3.50LG 0.88WD  
NUT, Hex Lock, 10-24 with Nylon Insert NC3B Black  
CHUTE, Grass Collector Middle, Black Poly  
CARRIAGE BOLT, 5/16-18 x 1 G5 Black  
LOCKWASHER, Spring, 5/16 Black  
3
4
5
6
7
8
9
NUT, Hex 5/16-18 NC-2B Black  
10  
11  
12  
13  
14  
15  
16  
SUPPORT ASSEMBLY, Triple Collector  
CLIP, Hair Pin, .125DIA Spring Wire 2.562LG Black  
PLATE & PINS ASSEMBLY, Hitch Triple Collector Black  
ROD, Hitch, .625DIA 16.5LG  
CAPSCREW, Hex Head, 1/2-13 x 1-1/4 G5 Black  
NUT, Hex Flange Whiz Lock, 1/2-13 Black  
DECAL, ID Plate  
Footnotes  
* Not a serviceable part.  
The above parts group applies to the following Mfg. Nos.:  
1694499 - Catcher  
© Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved.  
10  
TP 400-4219-00-AT-SMA  
Hardware Identification & Torque Specifications  
Common Hardware Types  
Torque Specification Chart  
Hex Head Capscrew  
FOR STANDARD MACHINE HARDWARE (Tolerance 20%)  
Washer  
No  
Marks  
Hardware  
Grade  
Lockwasher  
Carriage Bolt  
SAE Grade 2  
SAE Grade 5  
in/lbs  
SAE Grade 8  
in/lbs  
Hex Nut  
Size Of  
in/lbs  
Hardware ft/lbs  
Nm.  
2.1  
2.3  
3.1  
3.5  
7.6  
ft/lbs  
Nm.  
ft/lbs  
Nm.  
Standard Hardware Sizing  
8-32  
8-36  
19  
20  
30  
31  
43  
49  
8
10  
17  
19  
30  
35  
50  
55  
75  
90  
110  
3.4  
3.5  
4.9  
41  
43  
60  
68  
12  
14  
25  
27  
45  
4.6  
4.9  
6.8  
7.7  
16.3  
19.0  
34.0  
34.0  
61.2  
When a washer or nut is identified as 1/2”, this is the  
Nominal size, meaning the inside diameter is 1/2 inch; if a  
second number is present it represent the threads per inch  
10-24  
10-32  
1/4-20  
1/4-28  
5/16-18  
5/16-24  
3/8-16  
3/8-24  
7/16-14  
7/16-20  
1/2-13  
1/2-20  
9/16-12  
9/16-18  
5/8-11  
5/8-18  
3/4-10  
3/4-16  
7/8-9  
27  
31  
66  
76  
11  
12  
20  
23  
30  
35  
50  
55  
65  
75  
90  
100  
160  
180  
140  
155  
220  
240  
5.5  
When bolt or capscrew is identified as 1/2 - 16 x 2”, this  
means the Nominal size, or body diameter is 1/2 inch; the  
second number represents the threads per inch (16 in this  
example, and the final number is the body length of the  
bolt or screw (in this example 2 inches long).  
10.9  
13.6  
23.1  
25.8  
40.8  
47.6  
68.0  
74.8  
102.0  
122.4  
149.6  
8.6  
15.0  
16.3  
27.2  
31.3  
40.8  
47.6  
68.0  
74.8  
88.4  
102.0  
122.4  
136  
217.6  
244.8  
190.4  
210.8  
299.2  
326.4  
The guides and ruler furnished below are designed to  
help you select the appropriate hardware and tools.  
50  
70  
80  
68.0  
95.2  
0
108.8  
149.6  
163.2  
204.0  
231.2  
299.2  
326.4  
525.0  
571.2  
816.0  
897.6  
1/4  
110  
120  
150  
170  
220  
240  
386  
420  
600  
660  
Nut, 1/2”  
1/2  
Inside  
Diameter  
3/4  
120 163.2  
150 204.0  
1
2
3
4
180  
260  
300  
400  
440  
580  
640  
244.8  
353.6  
408.0  
544.0  
598.4  
788.8  
1/4  
1/2  
3/4  
7/8-14  
1-8  
1-12  
Screw, 1/2 x 2  
900 1,244.0  
Body  
Diameter  
870.4 1,000 1,360.0  
1/4  
NOTES  
1/2  
1. These torque values are to be used for all hardware  
excluding: locknuts, self-tapping screws, thread forming  
screws, sheet metal screws and socket head setscrews.  
2. Recommended seating torque values for locknuts:  
a. for prevailing torque locknuts - use 65% of grade 5  
torques.  
b. for flange whizlock nuts and screws - use 135% of  
grade 5 torques.  
3. Unless otherwise noted on assembly drawings, all torque  
values must meet this specification.  
Body  
Length  
3/4  
1/4  
1/2  
3/4  
Wrench & Fastener Size Guide  
1/2  
7/16  
DIA.  
DIA.  
3/8  
5/16  
1/4  
1/4” Bolt or Nut  
Wrench—7/16”  
5/16” Bolt or Nut  
Wrench—1/2”  
3/8” Bolt or Nut  
Wrench—9/16”  
7/16” Bolt or Nut  
Wrench (Bolt)—5/8”  
Wrench (Nut)—11/16”  
1/2” Bolt or Nut  
Wrench—3/4”  

American Lawn Mower Co Lawn Mower 1415 16 User Manual
Bolens Lawn Mower TMO 33931A User Manual
Dixon Lawn Mower 52 21 KAW 52 HONDA 52 20 KOH 52 25 KOH 60 25 KOH 60 25 B&S User Guide
Husqvarna Lawn Mower YTH2548XP User Guide
Poulan Lawn Mower 184314 User Guide
Poulan Lawn Mower 191798 User Guide
Snapper Lawn Mower 12LTH36 User Guide
Snapper Lawn Mower 150Z ZTR Series User Manual
Snapper Lawn Mower Accessory 0 50576 User Manual
Snapper Lawn Mower RZT20421BVE2 User Manual