Scag Power Equipment Lawn Mower GC STWC 61V User Guide

MODEL GC-STWC-61V  
THIS MANUALCONTAINS THE OPERATING  
INSTRUCTIONS AND SAFETY INFORMA-  
TION FORYOUR SCAGACCESSORY. READ-  
ING THIS MANUAL WILL PROVIDE YOU  
WITH MAINTENANCE AND ADJUSTMENT  
PROCEDURES TO KEEPYOURACCESSORY  
PERFORMING TO MAXIMUM EFFICIENCY.  
THE SPECIFIC MODELS THAT THIS BOOK  
COVERS ARE CONTAINED ON THE INSIDE  
COVER. BEFORE OPERATING YOUR MA-  
CHINE, PLEASE READ ALL THE INFORMA-  
TION ENCLOSED.  
PART NUMBER 03179  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.1 INTRODUCTION  
A replacement manual is available from your  
authorized Scag Service Dealer or by contacting:  
Scag Power Equipment, Service Department at P.O.  
Box 152, Mayville, WI 53050. You may also contact  
manual for this grass catcher can be downloaded by  
using the model and serial number or use the contact  
form to make your request. Please indicate the  
complete model and serial number of your Scag  
product when requesting replacement manuals.  
This manual has been prepared to provide the  
information you need to correctly assemble, operate,  
and maintain this grass catcher. Read it carefully and  
keep it for future reference.  
The replacement of any part on this product by other  
than the manufacturer's authorized replacement part  
may adversely affect the performance, durability or  
safety of this product.  
USE OF OTHER THAN ORIGINAL SCAG  
REPLACEMENT PARTS WILL VOID THE  
WARRANTY.  
WARNING  
DO NOT OPERATE WITHOUT DISCHARGE CHUTE, MULCHING  
KIT, OR ENTIRE GRASS CATCHER INSTALLED  
If additional information or service is needed that is  
not outlined in this manual, please contact your Scag  
Power Equipment dealer. Scag dealers are trained in  
the latest service methods and carry a full line of Scag  
replacement parts.  
2. Before removing the grass bags, disengage the  
mower, stop the engine and wait for all  
movement to stop.  
When ordering parts, always provide the complete  
model number of your catcher.  
3. ALWAYS turn the engine OFF, remove the key  
and wait for all movement to stop before  
servicing or cleaning the mower or the grass  
catcher.  
All information provided in this manual is based upon  
information available at the time of printing. Scag  
Power Equipment reserves the right to make changes  
at any time without notice or obligation.  
1.2 DIRECTION REFERENCE  
DANGER  
ROTATING BLOWER  
BLADES  
The "Right" and "Left", "Front" and "Rear" of the  
machine are referenced from the normal operating  
position.  
STOP ENGINE BEFORE  
ENTERING CHUTE  
CONTACT CAN INJURE  
2.1 SAFETY AND OPERATING  
INSTRUCTIONS  
4. Do not modify or alter any component of the  
grass catcher attachment or mower.  
-NOTE-  
To avoid personal injury, it is imperative that all  
safety instructions be observed.  
5. Do not allow any passengers to ride on the grass  
catcher attachment or on the mower.  
1. Read this operator's manual and the  
operator's manual that is supplied with the  
machine this attachment is used on.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.1 ASSEMBLY INSTRUCTIONS FOR 61"  
CUTTER DECK  
4. Install the grass catcher pulley onto the spindle  
assembly. Apply loctite to both pulley setscrews  
and tighten. See Figure 3-1.  
-NOTE-  
5. Remove the "Custom-Cut" and "Turbo" baffles  
from the cutter deck. Using the original  
hardware, install the new "Front" and "Turbo"  
baffles. See Figure 3-2.  
Use the illustrated parts list as a part number  
reference when following the assembly  
instructions.  
1. Remove all packaging materials. Lay out the  
mounting hardware and the catcher assembly  
parts for easy access. Prepare the work area  
making sure that it is a clean, safe environment.  
Front Baffle  
61V - 424403  
Turbo Baffle  
61V - 424212  
WARNING  
DO NOT OPERATE WITHOUT DISCHARGE CHUTE, MULCHING  
KIT, OR ENTIRE GRASS CATCHER INSTALLED  
UNDER SIDE OF  
VELOCITY-PLUS  
CUTTER DECK SHOWN  
2. Remove the discharge chute from the cutter  
deck. See Figure 3-1.  
FIGURE 3-2  
-NOTE-  
-NOTE-  
Do not discard the discharge chute or  
mounting hardware. The discharge chute  
MUST be reinstalled anytime the grass  
catcher has been removed from the machine.  
Do not discard the original "Custom-Cut"  
or "Turbo" baffles. These baffles may be  
reinstalled anytime the grass catcher has  
been removed from the machine.  
6. Install the blower mounting bracket to the deck  
using carriage bolts (p/n 04003-11), lockwashers,  
and nuts. Do not fully tighten the hardware at  
this time. See Figure 3-3.  
3. Remove the right side belt cover to gain access to  
the spindle assembly. Remove the front u-nut  
from the cutter deck bracket. See Figure 3-1.  
-NOTE-  
Retain the original belt cover. This cover  
MUST be reinstalled anytime the  
complete catcher system is removed.  
FLATWASHER  
INSTALL PULLEY  
ON RH SPINDLE SHAFT -  
ON TOP OF EXISTING  
SPINDLE DRIVE  
PULLEY  
REMOVE DISCHARGE  
CHUTE AND  
HARDWARE  
ELASTIC STOP  
NUT  
REMOVE EXISTING  
RT. SIDE BELT  
COVER  
CARRIAGE BOLT  
REMOVE U-NUT  
RIGHT SIDE OF  
CUTTER DECK SHOWN  
(Note: Some parts not shown for viewing purposes.)  
FIGURE 3-3  
Figure 1- GC-STC-V install art  
FIGURE 3-1  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Install the blower assembly to the mounting  
bracket and secure with the mounting pin.  
See Figure 3-4.  
12. Install the hopper mounting brackets to the  
outside of the frame on the rear of the machine.  
See Figure 3-6.  
Hopper  
Mounting  
Brackets  
8. Align the blower assembly with the discharge  
opening of the cutter deck. Tighten the  
hardware for the mounting bracket. See Figure  
3-4.  
Rear Frame  
9. Install the quick pin through the rear hole in the  
discharge chute mounting bracket. See Figure 3-  
Figure  
4
A
GC-STT Install Art  
4.  
BLOWER  
ASSEMBLY  
QUICK  
PIN  
FIGURE 3-6  
13. Attach the hood assembly to the machine by  
installing the mounting post into the hopper  
mounting brackets. Secure with the ring pins  
and tighten the locking bolts. See Figure 3-7.  
HAIR  
PIN  
MOUNTING  
BRACKET  
MOUNTING PIN  
TIGHTEN MOUNTING  
BRACKET HARDWARE  
RIGHT SIDE OF  
CUTTER DECK SHOWN  
Locking  
Bolts  
(Note: Some parts not shown for viewing purposes.)  
2006 GC-STC-V install art 3  
FIGURE 3-4  
Ring Pins  
Locking  
Bolts  
10. Install the belt to the spindle pulley. When  
replacing the belt, see figure 3-5 below.  
Ring Pins  
BACK SIDE  
IDLER PULLEY  
FIGURE 3-7  
BLOWER  
PULLEY  
14. Install the hose from the blower assembly  
adapter to the hopper hood and secure using the  
8-1/2"clamps.  
15. Install the bag assemblies.  
SPINDLE  
PULLEY  
FRONT SIDE  
IDLER PULLEY  
16. Using the weight support bar as a guide, identify  
the four corresponding mounting holes, and the  
existing hardware that will need to be removed in  
order to secure the weight support bar to the  
front of the machine as shown. See Figure 3-8,  
Page 4.  
FIGURE 3-5  
11. Install the new belt covers and secure. See  
items number 1 and number 21 on page 10 of the  
Blower Mounting Components section in the  
Illustrated Parts List for proper installation.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
17. Install one 7/16-14 x 1-3/4" hex head bolt into  
each of the four mounting holes in the weight  
support bar, and through the matching holes in  
the caster support weldment. Secure this  
assembly to the front of the machine using the  
7/16 - 1/2" x 1-1/4" x .083" flatwashers, and the  
7/16-14 elastic stop nuts. Torque hardware to  
59 ft. lbs. See Figure 3-8.  
ADAPTER  
BLOWER  
ASSEMBLY  
QUICK PIN  
PIN & HAIR PIN  
MOUNTING  
BRACKET  
RIGHT SIDE OF  
CUTTER DECK SHOWN  
2006 GC-STC-V removal art 1  
(Note: Some parts not shown for viewing purposes.)  
FIGURE 4-1  
FIGURE 3-8  
5. Loosen the locking bolts and remove the two (2)  
pins holding the hood assembly to the mounting  
posts on the rear of the machine. See Figure  
4-2.  
18. Operate and test.  
4.1 GRASS CATCHER REMOVAL  
INSTRUCTIONS  
1. Prepare the machine so there is easy and safe  
access to the work area. Remove the key and  
maintain all safety related work procedures.  
Always wear eye and hand protection.  
Loosen  
Locking  
Bolts  
2. Remove the bag assemblies from the grass  
catcher.  
Remove Pins  
Loosen  
Locking  
Bolts  
3. Remove the rubber strap holding the adapter to  
the blower assembly and the large quick pin  
securing the blower to the discharge mounting  
bracket. See Figure 4-1.  
Remove Pins  
FIGURE 4-2  
4. Remove the belt, pin, hair pin and large quick pin  
securing the blower assembly to the cutter deck  
and remove the blower assembly. See Figure 4-  
1.  
6. With help from an assistant, remove the hood  
assembly.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
DO NOT OPERATE WITHOUT DISCHARGE CHUTE, MULCHING  
KIT, OR ENTIRE GRASS CATCHER INSTALLED  
7. Re-install the side discharge chute to the opening  
on the cutter deck. Replace the two outside  
mounting bolts on the discharge chute with the  
clevis pins (p/n 04064-15) and rue cotter pins  
(p/n 04069-03). See Figure 4-3.  
8. Re-install the cutter deck belt cover.  
DISCHARGE  
CHUTE  
CLEVIS PIN  
P/N 04064-15  
CLEVIS PIN  
P/N 04064-15  
RUE COTTER PIN  
P/N 04069-03  
GC-STC-V removal art 3  
FIGURE 4-3  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
5.1 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS  
HOURS  
Break-In 8 20 40 100 200 500 Procedure  
(First 10)  
Comments  
X
X
X
X
Check all hardware for tightness  
Inspect hose and adapter  
Check belt for proper alignment  
Inspect fabric bags  
X
X
X
X
X
*Check screen in hopper  
Inspect hose and adapter  
Inspect fabric bags  
Remove debris from screen  
Check condition of blower  
*Apply grease to blower bearings  
Check belt for proper alignment  
See figure below  
X
* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions.  
GREASE FITTING  
ON BEARING HOUSING  
GREASE FITTING  
ON BEARING HOUSING  
BEHIND PULLEY  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC-61V BLOWER HOUSING ASSEMBLY  
9
10  
11  
12  
8
45  
48  
4
1
2
14  
11  
3
13  
9
11  
7
10  
47  
10  
14  
44  
27  
14  
11  
12  
15  
43  
42  
41  
16  
14  
17  
26  
39  
40  
18  
25  
34  
15  
17  
19  
20  
14  
28  
35  
21  
41  
5
38  
22  
23  
17  
35  
27  
24  
14  
46  
R
D
O
T
A
Stop T  
engine befo  
A
B
N
I
N
24  
14  
G
G
E
R
B
DO  
L
UN  
DISCHAR  
A
D
NO  
LESS  
T
O
E
re cleaning or  
PERATE MOS  
G
GE GU  
RASS CA  
A
N
D
rem  
ARD IS INSTAL  
TCHER  
O
W
E
L
ovingO  
R
W
E
R
LED  
R
29  
6
30  
33  
32  
37  
31  
31  
35  
35  
2006 GC-STWC-61V Blower Assembly  
35  
35 34  
36  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC-61V BLOWER HOUSING ASSEMBLY  
Ref.  
No.  
Part  
Number  
Ref.  
No.  
Part  
Number  
Description  
Description  
1
2
3
4
5
6
7
8
04067-10  
481547  
04066-04  
04001-21  
481377  
482080  
481428  
483223  
04024-02  
04021-05  
04041-07  
43277  
Pin, Ring 2-1/4" Long  
Lanyard, Deck Height Pin  
Quick Pin, 5/16" Dia.  
Bolt, Hex Head 3/8-16 x 1-3/4"  
Decal, Blower  
Decal, Rotating Blower  
Grip, Blower Lever  
Cap, Square  
Nut, Push On 3/8 Thread  
Lock Nut, 3/8-16  
Flatwasher, 3/8-.391 x .938 x .105  
Spacer  
Pulley, Idler 4" Dia.  
Nut, Elastic Stop 3/8-16  
Lockwasher, 3/8-16  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
04019-04  
Nut, Serr. Flange 3/8-16  
04001-136 Bolt, Hex Head 3/8-16 x 1-1/2 Gr. 8  
483037  
461931  
04003-12  
04063-06  
461796  
483034  
04019-03  
461930  
421319  
48136-02  
48135-14  
482298  
04012-04  
461932  
481522  
43212  
Decal, Danger  
Blower Housing Weldment  
Bolt, Carr. 5/16-18 x 3/4" Gr. 5  
Key, 1/4 x 1/4 x 1-1/2"  
Fan Weldment  
Bearing Assembly  
9
Nut, Serr. Flange 5/16-18  
Blower Housing Assembly, GC-STT  
Cover, Blower Housing  
Clamp, 8-5/8" Max Dia.  
Hose, 8.00" Dia. x 60.50" Long  
Pulley, 4-3/4" O.D. - 1" Bore  
Set Screw, 5/16-18 x 3/8"  
Frame, Blower Mount  
Spring, Main Drive  
Spacer  
Hair Pin Cotter, .177 x 3-1/4"  
Adapter w/Strap  
Receiver Weldment, Mounting Post  
Dust Shield  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
483209  
04021-09  
04030-04  
424361  
04003-05  
04001-46  
04001-81  
04001-21  
461928  
483182  
483189  
04043-04  
43575  
482871  
Plate, Catcher Mounting  
Bolt, Carr. 3/8-16 x 1-1/2"  
Bolt, Hex Head 3/8-16 x 2-1/4"  
Bolt, Hex Head 3/8-16 x 3-1/2"  
Bolt, Hex Head 3/8-16 x 1-3/4"  
Idler Arm Assembly  
04062-04  
461723  
451821  
424367  
Belt, GC-STC  
Pulley, 3-1/2" O.D., GC-STC  
Washer, 3/8 Hardened  
Pivot, Idler  
Decal, Belt Cover  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC-61V" BLOWER MOUNTING COMPONENTS  
UNDER SIDE OF  
VELOCITY-PLUS  
CUTTER DECK SHOWN  
16  
16  
10  
10  
11  
5
23  
2
26  
27  
23  
25  
4
6
7
28  
1
24  
26  
8
3
25  
25  
6
24  
13  
9
12  
21  
14  
15  
15  
22  
20  
16  
18  
17  
19  
RIGHT SIDE OF  
CUTTER DECK SHOWN  
2006 GC-STC-V BMC  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC-61V" BLOWER MOUNTING COMPONENTS  
Ref. Part  
No.  
Number  
Description  
1
483227  
Belt Cover, GC-61V  
2
3
04029-04  
483223  
Wingnut, Plastic 3/8" Small  
Cap, Square Vinyl  
4
5
6
7
8
9
04021-08  
461723  
Nut, Elastic Stop 1/4-20  
Adapter, Blower GC-STC, includes item #7  
Flatwasher, 1/4-.312 x .750 x .065  
Rubber Strap 7-3/4"  
Bolt, Hex Head 1/4-20 x 1-1/4"  
Knob W/Stud, 3/8-16 x 1-1/4"  
Clevis Pin, 5/16 x 1-1/2"  
Pin, Rue Cotter 5/16 Dia.  
Pin, Ring 1/2 x 2-1/4"  
04040-14  
48137-04  
04001-59  
481625-01  
04064-15  
04069-03  
04067-10  
481547  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
Lanyard  
482377  
Pulley, 5-1/2" Dia. 1.125 Bore  
Setscrew, 5/16-18 x 3/8"  
Nut, Elastic Stop 3/8-16  
Lockwasher, 3/8"  
Flatwasher, 3/8-.391 x .938 x .105  
Bolt, Carr. 3/8-16 x 1-1/4" Grade 5  
Mounting Post Weldment, Blower  
Belt Cover, GC-61V  
04012-04  
04021-09  
04030-04  
04041-07  
04003-11  
461894  
424328  
04110-03  
04003-23  
04001-09  
04040-15  
04021-10  
424403  
U-Nut  
Bolt, Carriage 3/8-16 x 1"  
Bolt, Hex Head 5/16-18 x 1"  
Flatwasher, 5/16-.375 x .875 x .083  
Nut, Elastic Stop 5/16-18  
Baffle, Front 61" Deck  
424212  
Baffle, Turbo 61" Deck  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC-61V BUCKET SUPPORT COMPONENTS (UPPER)  
3
36  
37  
35  
1
6
4
2
3
5
9
11  
8
33  
4
33  
5
23  
16  
21  
22  
9
21  
16  
13  
23  
32  
5
18  
31  
11  
19  
13  
16  
9
16  
5
24  
9
18  
20  
16  
14  
5
4
5
38  
16  
35  
25  
17  
31  
9
34  
15  
27  
30  
32  
29  
26  
28  
12  
10  
40  
39  
7
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC-61V BUCKET SUPPORT COMPONENTS (UPPER)  
Ref.  
No.  
Part  
Number  
Description  
1
423302  
Screen, Catcher Hood  
2
3
4
5
6
7
8
04090-02  
04041-19  
04001-32  
04041-01  
461408  
Pop Rivet, 3/16 x .652  
Flatwasher, 3/16-.196 x .469 x .048  
Bolt, Hex Head 3/8-16 x 1-1/4"  
Flatwasher, 3/8-.391 x .938 x .105  
Hood Assembly, GC-STT (includes items 1, 2 & 3 and items 2 & 15 on page 15)  
Bolt, Hex Head 7/16-14 x 1-3/4"  
Hinge, Upper LH  
04001-117  
423258  
9
04021-09  
04040-11  
04001-46  
04021-11  
04001-20  
04001-135  
451674  
04019-04  
04090-03  
43546  
482304  
423436  
43212  
04021-05  
43277  
Nut, Elastic Stop 3/8-16  
Flatwasher, 7/16-.500 x 1-1/4"  
Bolt, Hex Head 3/8-16 x 2-1/4"  
Nut, Elastic Stop 7/16-14  
Bolt, Hex Head 3/8-16 x 1-1/2"  
Bolt, Hex Head 3/8-16 x 1-3/4" Grade 8  
Support Weldment, Bag Frame  
Nut, Serrated Flange 3/8-16  
Rivot, 3/16 x .402 POP  
Bushing, Hopper Pivot  
Spring, Hood Hinge  
Hinge, Lower LH  
Spacer  
Locknut, 3/8-16  
Spacer  
Hinge, Upper RH  
Hinge, Lower RH  
Hose, 8" Dia. x 60-1/2"  
Clamp, 8-5/8" Max Dia.  
Tube, Filler  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
423259  
423261  
48135-14  
48136-02  
482422  
482421  
Elbow  
04001-10  
04021-10  
04040-15  
04041-11  
04030-04  
482409  
04010-25  
04021-01  
04001-08  
451517  
Bolt, Hex Head 5/16-18 x 1-1/4"  
Nut, Elastic Stop 5/16-18  
Flatwasher, 5/16-.375 x .875 x .083  
Flatwasher, 3/8- .406 x 1-1/2" x .179  
Lockwasher, 3/8" Spring  
Latch  
Screw, #10-32 x 3/4"  
Nut, Elastic Stop #10-32  
Bolt, Hex Head 5/16-18 x 3/4"  
Support Weldment, Weights  
Weight Assembly  
461097  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC-61V BUCKET SUPPORT COMPONENTS (LOWER)  
1
2
24  
22  
23  
21  
18  
"A"  
20  
19  
3
4
5
17  
16  
6
11  
13  
7
15  
TO "A"  
4
4
4
5
8
6
14  
7
12  
3
4
8
6
FRAME  
9
6
5
4
STC 2002 BSC  
9
10  
10A  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STWC-61 BUCKET SUPPORT COMPONENTS (LOWER)  
Ref. Part  
No.  
Number  
Description  
1
2
04090-02  
482321  
Pop Rivet, 3/16 x .652  
Seal, Hood  
3
423262  
Tube, Upright  
4
5
6
7
8
9
04041-07  
04021-09  
04020-04  
04021-05  
04067-07  
04001-19  
451726  
Flatwasher, 3/8-.391 x .938 x .105  
Nut, Elastic Stop 3/8-16  
Nut, 3/8-16  
Hex Lock Nut, 3/8-16  
Pin, Ring 1/2 x 2-1/4"  
Bolt, Hex Head 3/8-16 x 1"  
Mounting Bracket Weldment RH  
Mounting Bracket Weldment LH  
Lock Nut, 1/4-20 Center  
Bolt, Hex Head 3/8-16 x 2-1/4"  
Bolt, Hex Head 3/8-16 x 2-1/2"  
Bag Assembly, GC-STT  
Retainer, Seal  
10  
10A  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
451725  
04021-02  
04001-46  
04001-31  
482569  
423312  
451674  
04003-02  
04001-08  
423198  
04003-12  
423197  
04019-03  
04040-15  
04021-10  
Support, Bag Frame  
Bolt, Carr. 1/4-20 x 3/4"  
Bolt, Hex Head 5/16-18 x 3/4"  
Mount, Bag Frame Tube  
Bolt, Carr. 5/16-18 x 3/4"  
Tube, Bag Support  
Nut, Serr. Flange 5/16-18  
Flatwasher, 5/16-.375 x .875 x .083  
Nut, Elastic Stop 5/16-18  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GC-STC DECALS  
482871  
482871  
482275  
MANUFACTURED UNDER ONE OR MORE  
OF THE FOLLOWING PATENTS:  
4,487,006 4,885,903 4,920,733 4,967,543  
4,991,382 4,998,948 5,042,239 5,118,617  
5,133,176 5,826,416 5,832,708 5,865,018  
6,192,666 6,766,633 6,892,519  
PATENTS PENDING  
483044  
481327  
481377  
483037  
482080  
482080  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY- COMMERCIAL ACCESSORY  
AnypartoftheScagcommercialaccessorymanufacturedbyScagandfound,inthereasonablejudgmentofScag,  
tobedefectiveinmaterialorworkmanship,willberepairedorreplacedbyanAuthorizedScagServiceDealerwithout  
charge for parts and labor.  
The Scag accessory, including any defective part, must be returned to an Authorized Scag Service Dealer within  
the warranty period. The expense of delivering the accessory to the dealer for warranty work and the expense of  
returningitbacktotheownerafterrepairorreplacementwillbepaidforbytheowner. Scag’sresponsibilityinrespect  
toclaimsislimitedtomakingtherequiredrepairsorreplacements,andnoclaimofbreachofwarrantyshallbecause  
for cancellation or rescission of the contract of sale of any Scag machine. Proof of purchase will be required by the  
dealer to substantiate any warranty claim. All warranty work must be performed by an Authorized Scag Service  
Dealer.  
This warranty is limited to 90 days from the date of original retail purchase for any Scag accessory that is used for  
commercial purposes, or any other income-producing purpose including rental use.  
This warranty does not cover any accessory that has been subject to misuse, neglect, negligence, or accident, or  
thathasbeenoperatedinanywaycontrarytotheoperating instructionsasspecifiedintheOperator'sManual. The  
warranty does not apply to any damage to the accessory that is the result of improper maintenance, or to any  
accessory or parts that have not been assembled or installed as specified in the Operator's Manual.  
The warranty does not cover any accessory that has been altered or modified. In addition, the warranty does not  
extend to repairs made necessary by normal wear, or by the use of parts or accessories which, in the reasonable  
judgment of Scag, are either incompatible with the Scag mower or adversely affect its operation, performance or  
durability. This warranty does not cover engines and electric starters, which are warranted separately by their  
manufacturer.  
ScagPowerEquipmentreservestherighttochangeorimprovethedesignofanyaccessorywithoutassumingany  
obligation to modify any accessory previously manufactured.  
All other implied warranties are limited in duration to the 90 day warranty period. Accordingly, any such implied  
warranties including merchantability, fitness for a particular purpose, or otherwise, are disclaimed in their entirety  
after the expiration of the appropriate ninety day warranty period. Scag’s obligation under this warranty is strictly  
andexclusivelylimitedtotherepairorreplacementofdefectivepartsandScagdoesnotassumeorauthorizeanyone  
toassumeforthemanyotherobligation. Somestatesdonotallowlimitationsonhowlonganimpliedwarrantylasts,  
so the above limitation may not apply to you.  
Scagassumesnoresponsibilityforincidental,consequentialorotherdamagesincluding,butnotlimitedto,expense  
forgasoline,oil,expenseofdeliveringthemachinetoanAuthorizedScagServiceDealerandexpenseofreturning  
it back to the owner, mechanic’s travel time, telephone or telegram charges, rental of a like product during the time  
warranty repairs are being performed, travel, loss or damage to personal property, loss of revenue, loss of use of  
the mower, loss of time, or inconvenience. Some states do not allow the exclusion or limitation of incidental or  
consequential damages, so the above limitation or exclusion may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2005  
PART NO. 03179  
PRINTED 8-2005  
PRINTED IN USA  
SCAG POWER EQUIPMENT  
DIVISION OF METALCRAFT OF MAYVILLE, INC.  
WWW.SCAG.COM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Lawn Mower 917385124 User Guide
Cub Cadet Lawn Mower 190 190 100 User Guide
Poulan Lawn Mower Accessory 532178476 User Guide
Snapper Lawn Mower 7800842 01 User Manual
Snapper Lawn Mower FR215012 NFR215012 User Manual
Snapper Lawn Mower OP21507B User Manual
Snapper Lawn Mower Z1402K User Manual
Stiga Lawn Mower 12 1203 22 User Guide
Stiga Lawn Mower 13 6133 36 User Guide
Tiger Lawn Mower JD 62 6420 User Guide