Husqvarna Lawn Mower Accessory H346SL User Guide

OWNER’S MANUAL  
Model Number H346SL  
Product No. 960 73 00-12  
(MFG. ID. No. 96073001200)  
46 Inch Mower  
Grass Catcher  
• Assembly  
• Operation  
• Customer Responsibilities  
• Repair Parts  
532413532 03.05.07 BY  
Printed in U.S.A.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY RULES  
Safe Operation Practices for Ride-On Mowers  
machine. Repair, if necessary, before restarting.  
IV. TOWING  
Nevermakeanyadjustmentsorrepairswiththeengine  
running.  
Tow only with a machine that has a hitch designed for  
towing. Do not attach towed equipment except at the  
hitch point.  
Check grass catcher components and the discharge  
guard frequently and replace with manufacturer's rec-  
ommended parts, when necessary.  
Mower blades are sharp. Wrap the blade or wear  
gloves, and use extra caution when servicing them.  
Check brake operation frequently. Adjust and service  
as required.  
Maintain or replace safety and instruction labels, as  
necessary.  
Follow the manufacturer's recommendation for weight  
limits for towed equipment and towing on slopes.  
Never allow children or others in or on towed equip-  
ment.  
On slopes, the weight of the towed equipment may  
cause loss of traction and loss of control.  
Travel slowly and allow extra distance to stop.  
V. SERVICE  
SAFE HANDLING OF GASOLINE  
To avoid personal injury or property damage, use extreme  
careinhandlinggasoline. Gasolineisextremelyammable  
and the vapors are explosive.  
Be sure the area is clear of bystanders before operat-  
ing. Stop machine if anyone enters the area.  
Never carry passengers.  
Extinguish all cigarettes, cigars, pipes, and other  
sources of ignition.  
Use only approved gasoline container.  
Never remove gas cap or add fuel with the engine  
running. Allow engine to cool before refueling.  
Never fuel the machine indoors.  
Do not mow in reverse unless absolutely necessary.  
Always look down and behind before and while back-  
ing.  
Nevercarrychildren,evenwiththebladesshutoff. They  
may fall off and be seriously injured or interfere with  
safemachineoperation.Childrenwhohavebeengiven  
rides in the past may suddenly appear in the mowing  
area for another ride and be run over or backed over  
by the machine.  
Keepchildrenoutofthemowingareaandinthewatchful  
care of a responsible adult other than the operator.  
Be alert and turn machine off if a child enters the  
area.  
Before and while backing, look behind and down for  
small children.  
Mow up and down slopes (15° Max), not across.  
Be alert and turn machine off if a child enters the  
area.  
Never store the machine or fuel container where there  
is an open flame, spark, or pilot light such as on a water  
heater or other appliances.  
Never fill containers inside a vehicle or on a truck or  
trailer bed with plastic liner. Always place containers  
on the ground away from your vehicle when filling.  
Removegas-poweredequipmentfromthetruckortrailer  
and refuel it on the ground. If this is not possible, then  
refuel such equipment with a portable container, rather  
than from a gasoline dispenser nozzle.  
Keep the nozzle in contact with the rim of the fuel tank  
orcontaineropeningatalltimesuntilfuelingiscomplete.  
Do not use a nozzle lock-open device.  
If fuel is spilled on clothing, change clothing immedi-  
ately.  
Never overfill fuel tank. Replace gas cap and tighten  
securely.  
Choose a low ground speed so that you will not have  
to stop or shift while on the slope.  
Avoid starting, stopping, or turning on a slope. If the  
tires lose traction, disengage the blades and proceed  
slowly straight down the slope.  
If machine stops while going uphill, disengage blades,  
shift into reverse and back down slowly.  
Do not turn on slopes unless necessary, and then, turn  
slowly and gradually downhill, if possible.  
GENERAL SERVICE  
Never operate machine in a closed are.  
Keep all nuts and bolts tight to be sure the equipment  
is in safe working condition.  
Never tamper with safety devices. Check their proper  
operation regularly.  
Keep machine free of grass, leaves, or other debris  
build-up. Cleanoilorfuelspillageandremoveanyfuel-  
soaked debris. Allow machine to cool before storing.  
If you strike a foreign object, stop and inspect the  
CONGRATULATIONS on your purchase of a new Grass Catcher. It has been designed, engineered and manufactured to  
give you the best possible dependability and performance.  
Should you experience any problems you cannot easily remedy, please contact your nearest authorized service center/  
department. They have competent, well trained technicians and the proper tools to service or repair this unit.  
Please read and retain this manual. The instructions will enable you to assemble and maintain your Grass Catcher properly.  
Always observe the "SAFETY RULES".  
TABLE OF CONTENTS  
SAFETY RULES ...................................................................2-3  
ASSEMBLY...........................................................................5-8  
OPERATION ............................................................................ 8  
CUSTOMER RESPONSIBILITIES........................................... 9  
STORAGE................................................................................ 9  
REPAIR PARTS ............................................ Center of Manual  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
KNOW YOUR GRASS CATCHER  
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS  
CATCHER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the  
assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass  
Catcher and to prevent injury to yourself and others. Save this manual for future reference.  
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe  
eye damage. Always wear safety glasses or eye shields before starting your tractor and while mowing.  
We recommend a wide vision safety mask for over the spectacles or standard safety glasses.  
COMPLETE BAGGER MUST BE IN PLACE BEFORE OPERATING MOWER  
UNPACKING INSTRUCTIONS  
TOOLS REQUIRED FOR ASSEMBLY  
Remove all parts and packing materials from carton.  
(1) 9/16" Wrench  
Check carton contents against list. Be sure all parts  
are there.  
PARTS IDENTIFICATION:  
SHOULDER  
BOLTS  
CARTON CONTENTS:  
(1) Support Assembly  
(1) Cover Assembly  
(2) Shoulder Bolts  
(1) Retainer Spring  
SUPPORT  
ASSEMBLY  
(3) Containers  
(1) Upper Chute  
(1) Lower Chute  
FULL  
COVER  
ASSEMBLY  
BAG  
INDICATOR  
RETAINER SPRING  
CHUTE LATCH  
UPPER  
CHUTE  
LOWER  
CHUTE  
ATTACHING  
STRAPS  
GRASS  
CATCHER  
CONTAINERS  
LOWER  
CHUTE  
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the  
tractor, in the operator's position.  
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:  
Depress clutch/brake pedal fully and set parking brake.  
Place gearshift/motion control lever in "NEUTRAL" position.  
Place attachment clutch in "DISENGAGED" position.  
Turn ignition key "OFF" and remove key.  
Make sure the blade and all moving parts have completely stopped.  
Disconnect spark plug wire from plug and place where it cannot come in contact with plug.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
MOUNTING COVER ASSEMBLY TO  
SUPPORT ASSEMBLY (See Fig. 2)  
NOTE: For ease of assembly, you may wish to obtain  
the assistance of another person for mounting cover as-  
sembly to tractor.  
BAGGER SUPPORT ASSEMBLY  
(See Fig. 1)  
1. Remove and discard the upper bolt on both sides of  
thedrawbar. Usingthesameholes, installtheshoulder  
bolts supplied and tighten securely.  
2
1
2. Align support assembly pin with hole in drawbar and  
hang assembly over the shoulder bolts.  
1. Lift cover and align cover brackets with support  
assembly tubes.  
3. Besuresupportassemblyisseatedproperlyandsecure  
with retainer spring supplied.  
2. Slide cover assembly down onto the support tubes.  
REMOVE AND DISCARD  
UPPER BOLTS AND INSTALL  
SHOULDER BOLTS SUPPLIED  
COVER  
ASSEMBLY  
SUPPORT  
ASSEMBLY  
FIG. 2  
SUPPORT  
ASSEMBLY  
3064  
PIN  
DRAWBAR  
RETAINER  
SPRING  
FIG. 1  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTAINER MOUNTING (See Fig. 3)  
LOWER CHUTE - MOWER WITH  
MOUNTING TAB (See Fig. 4)  
3
4
1. Install one container to left side first. Install another  
container to center position and one in right position.  
NOTE: Left edge of right container should always overlap  
right edge of left container at center supports.  
2. Close cover and lock latches over center support  
tubes. To lock and release latches, pull back on latch  
handles.  
1. Raise and hold deflector shield in upright position.  
2. Place slot in lower chute over mounting tab on mower  
and position lower chute over mower opening as  
shown.  
3. Hook rear latch into flange hole on back of mower.  
4. Hook front latch into flange hole on front of mower.  
CAUTION: Do not remove deflector shield  
from mower. Raise and hold shield when  
attaching lower chute and allow it to rest  
on chute while in operation.  
COVER LATCH  
HANDLES  
CENTER  
SUPPORT  
TUBES  
DEFLECTOR SHIELD  
HINGE BRACKET  
CONTAINER  
HANDLE  
FIG. 3  
DEFLECTOR SHIELD  
MOUNTING  
TAB  
REAR LATCH  
FRONT LATCH  
FIG. 4  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
UPPER CHUTE (See Figs. 5A and 5B)  
LEVEL MOWER  
5
6
1. Lower mower to its lowest cutting position.  
2. Assemble upper chute by inserting curved end into  
hole in back of cover.  
Be sure mower is properly leveled for best mower  
performance. See your tractors owner's manual for  
instructions  
TIP: Holding upper chute as shown and twisting while  
installing in cover will help keep the rubber seal in place.  
NOTE: Handle carefully so as not to damage full bag indi-  
cator.  
COVER  
UPPER  
CHUTE  
FIG. 6A  
3. Push in and turn upper chute until it is in line with lower  
chute.  
4. Align the bosses on lower chute with alignment slots  
on upper chute and slide together.  
5. Secure with rubber latch by hooking hole in latch over  
latch pin.  
FULL BAG  
INDICATOR  
COVER  
UPPER  
CHUTE  
HANDLE  
LATCH PIN  
RUBBER  
LATCH  
LOWER  
CHUTE  
ALIGN-  
MENT  
SLOT  
BOSSES  
FIG. 6B  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Your bagger is equipped with a full bagger indicator.  
TIPS FOR IMPROVED BAGGING  
OPERATION:  
Movement of the wheel increases as the bags fill. The  
wheel will be spinning fastest just before the bags fill  
completely. When the wheel stops, it indicates that the  
bags are full and the chutes have become clogged.  
Follow the mower operation instructions in your tractor  
owner's manual.  
When operating your grass catcher on a lawn where grass  
and leaf bagging equipment has not been used, you are  
picking up thatch and debris that has accumulated for long  
periods of time. The amount collected and the total time  
of operation may be greater than you will experience with  
regular use of your grass catcher.  
NOTE: To help prevent clogging of chutes, check/empty  
bagswhenthewheelisspinningfast. Experiencewillteach  
you the best time to empty the bags.  
Care should be taken not to damage the parts and that  
the wheel spins freely at the beginning of each use.  
If the grass catcher fails to pick up cut grass or leaves,  
it is an indication that clogging has occurred in the  
system or that the grass catcher containers are full.  
Usually this is indicated by the stopped movement of  
the full bagger indicator.  
Always run throttle at full speed when bagging.  
Select a gear low enough to give good mower cutting  
performance, good quality cut and good bagging  
performance.  
NOTE: It may be necessary to overlap width of cut to suit  
your conditions.  
a. Disengage blades, shift into neutral, engage the  
parking brake and stop the engine.  
If grass is extremely tall, it should be mowed twice. The  
first time relatively high, the second time to desired  
height.  
- Raise seat. Unlatch and raise cover.  
- Slide out containers and dispose of clippings .  
- Replace containers, close cover, and latch.  
b. Unlatch chutes and check for clogging.  
- Remove all debris in chutes.  
Use left hand side of mower for trimming.  
Plastic trash bags can be inserted inside grass catcher  
containers for ease of debris disposal. To remove the  
plastic trash bags when full:  
a. Disengage blades, shift into neutral, engage the  
parking brake and stop the engine.  
- Reassemble and latch chutes  
c. Checktoinsurefullbaggerindicatorhasnotbecome  
clogged.  
b. Raise seat. Unlatch and raise cover.  
- The air passage hole must be clear of debris.  
Gentlyinsertasmalltwigorwireintopassageway  
to clear.  
c. Remove one container at a time by grasping  
container handles and pulling toward the rear, off  
of the tube rails.  
d. With the container resting on the ground, close  
and secure the top of the plastic lawn bag.  
CAUTION  
e. Tip the container on its side and slide the filled bag  
from the container.  
f. Install a new plastic lawn bag with the edges of  
the bag draped over upper lip of the container.  
g. Repeat for other containers.  
h. Reinstall containers making sure right container  
overlaps left container at center supports.  
j. Closecoverandsecurelatchesovercentersupport  
tubes.  
Avoid cutting wet grass or in the morning while the dew  
is still heavy. Grass clippings collected under these  
conditions tend to be sticky and adhere to the walls of  
the flow path causing clogging.  
• Do not operate mower with grass catcher  
partially installed.  
• Disengage blades and stop engine before  
leaving tractor seat to empty containers,  
unclogging chutes, etc.  
• Close cover before starting.  
• Disengage mower when crossing driveways  
or gravel surfaces and other areas where  
thrown objects could be a hazard.  
• Do not attempt to vacuum up cans or other  
potentially hazardous projectiles.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMER RESPONSIBILITIES  
GENERAL RECOMMENDATIONS  
CAUTION: Grass catcher components  
are subject to wear, damage and  
deterioration, which could expose  
moving parts or allow objects  
to be thrown. Frequently check  
components and replace with  
manufacturer's recommended parts,  
when necessary.  
Always observe safety rules when performing any main-  
tenance.  
Before each use check for loose fasteners.  
Clean unit thoroughly after each use.  
BLADE CARE  
Forbestresultsmowerbladesmustbekeptsharp. Replace  
bent or damaged blades.  
See BLADE CARE instructions in your tractor owner's  
manual.  
CAUTION:BEFOREPERFORMINGANY  
MAINTENANCE,SERVICEORADJUST-  
MENTS:  
Depress clutch brake pedal fully and  
set parking brake.  
Place gearshift/motion control lever in  
"NEUTRAL" position.  
Placeclutchcontrolin"DISENGAGED"  
position.  
Turn ignition key to "OFF" position.  
Make sure blades and all moving parts  
have completely stopped.  
Disconnect spark plug wire(s) from  
spark plug(s) and place wire where it  
cannot come in contact with plug.  
STORAGE  
When grass catcher is to be stored for a period of time,  
clean it thoroughly, remove all dirt, grass, leaves, etc. Store  
in a clean, dry place.  
CAUTION: Donotleavegrassinbagger  
containers. Emptycontainersaftereach  
useandbeforestoring. Failuretodoso  
mayresultinspontaneouscombustion  
which could develop into a fire.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
REPAIR PARTS  
GRASS CATCHER - MODEL NUMBER H346SL (PRODUCT NO. 960 73 00-12)  
4
5
6
7
8
10  
12  
13  
9
2
9
11  
14  
2
18  
20  
15  
38  
38  
20  
34  
37  
15  
9
20  
12  
14  
3
20  
33  
26  
32  
31  
35  
33  
31  
28  
29  
29  
30  
KEY PART  
NO. NO.  
KEY PART  
NO. NO.  
DESCRIPTION  
DESCRIPTION  
2
3
532069180 Nut, Crownlock #10-24  
532127533 Screen, Cover  
22  
23  
24  
25  
26  
27  
28  
31  
32  
33  
34  
35  
38  
39  
29  
30  
532133235 Spacer, Cover  
532132983 Spring, Cover R.H. (gray)  
532179745 Bracket, Lock  
873800400 Locknut  
532124670 Spring, Retainer  
872140405 Bolt  
532198364 Support Assembly  
532174083 Plug, Tubing End  
532176990 Bagger, Frame  
532192786 Pin, Hinge  
532192550 Gasket, Cover  
532400226 Container  
4
5
532193010 Cover Assembly (Includes 34 & 37)  
532411397 Chute, Upper  
6
7
8
9
10  
11  
12  
13  
14  
15  
18  
20  
21  
818021008 Screw, Special #10-14x1/2  
532130933 Full Bag Indicator  
532087175 Screw, #10-24 x 1-1/8  
819061216 Washer 3/16x3/4x16 Ga.  
532007206 Spacer, Split  
532060867 Nut, Acorn #10-24  
810071000 Washer, lock  
532109808 Latch, Chute  
532125004 Nut, Weld  
532160793 Latch, Hook  
532405455 Chute, Lower  
532130895 Latch Handle, Cover  
532155042 Strip, Reinforcement  
532176997  
532165898 Spring, retainer  
Shoulder bolt, self tapping  
871081010 Screw #10-24 x 5/8  
532132796 Spring, Cover L.H. (black)  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
starter ropes and tiller tines;  
(2) Natural discoloration of material due to ultraviolet light;  
WARRANTY STATEMENT  
(3) Engine and drive systems not manufactured by Husqvarna; these items are covered by the respective manufacturer’s  
warranty as provided in writing with the product information supplied at the time of purchase; all claims must be sent to the  
appropriate manufacturer;  
SECTION 1: LIMITED WARRANTY  
(4) Lawn and garden attachments are covered by a third party which gives a warranty, all claims for warranty should be sent  
to the manufacturer,  
(5) Commercial or consumer mowing decks with sand abrasion damage.  
(6) Emission Control System components necessary to comply with CARB-TIER II and EPA regulations which are  
manufactured by third party engine manufacturer.  
Husqvarna Forest & Garden Company (“Husqvarna”) warrants Husqvarna product to the original purchaser to be free from  
defects in material and workmanship from the date of purchase for the “Warranty Period” of the product as set forth below:  
Lifetime Warranty (Parts and Labor): All tiller tines and trimmer shafts against breakage. Proof of purchase required.  
Lifetime Warranty (“PARTS ONLY” after initial warranty expiration): Ignition coils and modules on handheld product.  
Proof of purchase required.  
WARRANTY SCHEDULE FOR TURF CARE Equipment - Zero Turn Riders  
SECTION 4: EXCEPTIONS AND LIMITATIONS  
This warranty shall be inapplicable to defects resulting from the following:  
(1) Accident, abuse, misuse, negligence and neglect, including stale fuel, dirt, abrasives, moisture, rust, corrosion, or any  
adverse reaction due to incorrect storage or use habits;  
(2) Failure to operate or maintain the unit in accordance with the Owner’s/Operator’s manual or instruction sheet furnished  
by Husqvarna;  
(3) Alterations or modifications that change the intended use of the product or affects the product’s performance, operation,  
safety, or durability, or causes the product to fail to comply with any applicable laws; or:  
(4) Additional damage to parts or components due to continued use occurring after any of the above.  
(New warranty applies to units sold after August 1, 2005. Also applies to units factory-equipped with R.O.P.S.  
EZ Zero Turn Riders: 3 year consumer warranty or 600 hours of use (when used solely at the owner’s residence.)  
EZ & MZ Zero Turn Riders: 1 year commercial warranty or 600 hours of use.  
iZ, LZ & BZ Zero Turn Riders: 5 year consumer warranty or 1,500 hours of use.  
iZ, LZ & BZ Zero Turn Riders: 5 year commercial warranty or 1,500 hours of use.  
3 Year or 1,500 Hour Commercial Use Warranty: spindles on zero turn riders, hydraulic pumps and wheel motors.  
Warranty Schedule for Turf Care Walk Behind Units - W, WG & WH Zero Turn Riders - 3 year consumer and commercial  
warranty. New warranty applies to units sold after August 1, 2005. Also applies to units factory-equipped with R.O.P.S.  
2 Year COMMERCIAL and CONSUMER Warranty: all Husqvarna ground-engaging commercial equipment.  
WARRANTY SCHEDULE FOR CONSUMER TURF CARE EQUIPMENT:  
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE  
PURCHASER. HUSQVARNA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR  
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THESE PRODUCTS EXCEPT TO THE EXTENT  
PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE ON THESE PRODUCTS IS LIMITED IN DURATION TO THE WARRANTY PERIOD AS  
DEFINED IN THE LIMITED WARRANTY STATEMENT. HUSQVARNA RESERVES THE RIGHT TO CHANGE OR  
IMPROVE THE DESIGN OF THE PRODUCT WITHOUT NOTICE, AND DOES NO T ASSUME OBLIGATION TO UPDATE  
PREVIOUSLY MANUFACTURED PRODUCTS.  
2 Year Consumer Warranty: Automatic mower, all Residential Zero Turn Riders, all lawn, yard and garden tractors, all  
noncommercial walk behind mowers, tillers, snow blowers, electrical products and power-assist collection systems for  
noncommercial, nonprofessional, noninstitutional or nonincome producing use, except as herein stated. All consumer  
product use must have been limited to the owner’s residence.  
WARRANTY SCHEDULE FOR CONSUMER FOREST & GARDEN EQUIPMENT:  
2 Year Consumer Warranty: all consumer chain saws, trimmers, brushcutters, clearing saws, handheld blowers, backpack  
blowers, hedge trimmers, and electrical products for noncommercial, nonprofessional, noninstitutional or nonincome  
producing use, except as herein stated. All consumer product use must have been limited to the owner’s residence.  
2 Year or 2,000 Hour Powertrain & 1 Year or 1,000 Hour Body Warranty: Husqvarna Utility Vehicles.  
1 Year Warranty: Power cutters, stump grinder, pole pruners and pole saws for non-commercial, non-professional,  
noninstitutional, non-municipality or non-income producing use. All 300 series trimmers, brushcutters, clearing saws,  
hovering trimmers, stick edgers, backpack blowers, hand held blowers, hedge trimmers, power-assist collection systems for  
commercial, institutional, professional or income producing purposes or use.  
1 Year Conditional Component Warranty: Chain saw crankshafts for commercial/professional use (parts and labor).Saw  
must be operated with Husqvarna XP 2 cycle oil.  
90 Day Commercial Warranty: Automatic mower, chain saws, 100 series trimmers, power cutters, stump grinders, pole  
saws, pole pruners, snow throwers, model series 580 & 600 walk-behind mowers, or any Husqvarna product used for  
commercial, institutional, professional, municipality or income producing purposes or use except as otherwise provided herein.  
Batteries: 1 year prorated limited warranty with 100% replacement during the first 6 months.  
Rental Warranty: 90 days on all applicable professional equipment reference warranty time period charts  
located in the back of the Retailer Warranty Policy & Procedure Manual.  
Husqvarna Safety Apparel carries a 90-day warranty from the date of the customer’s original purchase for defects in  
material and workmanship. Normal wear, tear or abuse is not covered under warranty. Product must be returned to Charlotte  
with a warranty claim form. All care and maintenance instructions must be followed as stated by the manufacturer on the  
care label. The fit of the protective apparel/boot is not covered under warranty.  
Some states do not allow the exclusion of incidental or consequential damages, or limitations on how long an implied  
warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and  
you may also have other rights which vary from state to state.  
SECTION 5: CUSTOMER RESPONSIBILITIES  
The product must exhibit reasonable care, maintenance, operation, storage and general upkeep as written in the  
maintenance section of the Owner’s/Operator’s manual. Should an operational problem or failure occur, the product should  
not be used, but delivered as is to an authorized Husqvarna retailer for evaluation. Proof of purchase, as explained in  
section 6, rests solely with the customer.  
SECTION 6: PROCEDURE TO OBTAIN WARRANTY CONSIDERATION  
It is the Owner’s and Retailer’s responsibility to make certain that the Warranty Registration Card is properly filled out and  
mailed to Husqvarna Forest & Garden Company. This card should be mailed within ten (10) days from the date of purchase  
in order to confirm the warranty and to facilitate post-sale service.  
Proof of purchase must be presented to the authorized Husqvarna retailer in order to obtain warranty service. This proof  
must include date purchased, model number, serial number, and complete name and address of the selling retailer.  
30 Day Warranty: Replacement parts, accessories including bars and chains, tools and display items. Emission control  
system components necessary to comply with CARB-TIER II and EPA regulations, except for those components which are  
part of engine systems manufactured by third part engine manufacturers for which the purchaser has received a separate  
warranty with product at time of purchase.  
To obtain the benefit of this warranty, the product believed to be defective must be delivered to an authorized Husqvarna  
retailer in a timely manner, no later than thirty (30) days from date of the operational problem or failure. The product must be  
delivered at the owner’s expense. Downtime, pick-up and delivery charges are not covered by this warranty. An authorized  
Husqvarna retailer can be normally located through the “Yellow Pages” of the local telephone directory or by calling 1-800-  
HUSKY62 for a retailer in your area.  
SECTION 2: HUSQVARNA’S OBLIGATIONS UNDER THE WARRANTY  
Husqvarna will repair or replace defective components without charge for parts or labor if a component fails because of a  
defect in material or workmanship during the warranty period.  
HUSQVARNA  
7349 Statesville Road  
Charlotte, NC 28269  
2008  
SECTION 3: ITEMS NOT COVERED BY THIS WARRANTY  
The following items are not covered by this warranty:  
(1) Normal customer maintenance items which become worn through normal regular use, including, but not limited to, belts,  
blades, blade adapters, bulbs, clutches, clutch drums, filters, guide bars, lubricants, rewind springs, saw chain, spark plugs,  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Exmark Lawn Mower FMD 604 User Guide
Husqvarna Lawn Mower 2346 XLS User Guide
Land Pride Lawn Mower RBT 45 User Guide
Massey Ferguson L&G; Lawn Mower 1693583 User Manual
Snapper Lawn Aerator 4553 User Guide
Snapper Lawn Mower GM2513H User Manual
Snapper Lawn Mower LT200H481BV2 User Manual
Snapper Lawn Mower P21507BE User Manual
Weed Eater Lawn Mower 166301 User Guide
Weed Eater Lawn Mower 180530 User Guide