Hayter Mowers Lawn Mower Code 100C User Guide

Envoy  
CODE  
100C  
.
101C  
OWNER'S HANDBOOK  
(English Version)  
FROM SERIAL NO: 100C001001, 101C001001  
ISSUE 11.10.04  
HANDBOOK: 100133(REV .0.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
1.2 Main Features/Specifications  
1.3 Contents  
1.19 - 1.22 Mower Maintenance  
1.19  
1.19  
1.19  
1.19  
1.19  
1.20  
1.21  
1.21  
1.22  
- Deck Housing  
- Securing Nuts and Bolts  
- Lubrication  
- Motor  
- Switch Control Unit  
- Cutterblade Removal  
- Cutterblade Sharpening  
- Supply Cable  
1.4 Introduction  
1.5 Warranty  
1.6 - 1.9 Safety Precautions  
- Storage  
1.9 Safety Symbols  
1.9 Control Symbols  
1.23 - 1.24 Trouble Shooting  
1.25 EC Declaration of Conformity  
1.26 - 1.27 Parts List  
1.10 Assembling the Mower  
1.10  
1.10  
1.10  
1.10  
- Delivery Checklist  
- Handlebar  
- Grassbag Attachment  
- Supply Cable  
1.28 Parts list Diagram  
1.30 - 1.31 Notes  
1.11 - 1.15 Operating The Mower  
1.11  
1.11  
1.11  
1.11  
1.12  
1.12  
1.12  
1.13  
1.13  
1.13  
1.13  
1.14  
1.15  
- Electrical Connections  
- Starting  
- Forward Travel  
- Turning  
- Stopping  
- Height of Cut  
- Before Mowing  
- Grassbag  
- Without Grass Collection  
- Heavy Growth  
- Non-Grassed Areas  
- Safe Mower Practice  
- Overloading Protection  
1.32 Customer Info  
1.16 - 1.17  
1.17  
- Lawn Care Calendar - Guide Only  
- Lawn Stripes  
1.18 Maintenance Schedule  
1.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Thank you for purchasing a Hayter mower. The following pages are designed to help you gain  
safe and efficient service from your mower.  
IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives  
essential information regarding mower safety, operation, maintenance and specifications. Read  
and understand this handbook prior to operating your mower for the first time. Make sure you  
are familiar with all the controls and points of regular maintenance. If you have any doubts,  
consult your local Hayter authorised dealer who will be pleased to give you assistance.  
IMPORTANT: This mower is designed solely for use in a domestic grass cutting  
environment. Use in any other way is considered as contrary to the intended use. Compliance  
with and strict adherence to the conditions of operation, service and repair as specified in this  
handbook also constitute essential elements of the intended use.  
This mower should be operated, serviced and repaired only by persons who are familiar with  
its particular characteristics and who are acquainted with the relevant safety procedures.  
The safety precautions listed in this handbook and all other generally recognised regulations on  
safety must be observed at all times.  
Any arbitrary modifications carried out to this machine may relieve Hayter Limited of  
liability for any resulting damage or injury.  
Hayter mowers are robustly constructed and designed for efficient economical  
performance under normal mowing conditions. Correct operation and maintenance will ensure  
a long and satisfactory service life. Prior to despatch from our factory every effort is made to  
ensure that your mower is delivered in perfect condition.  
Throughout this handbook all references to left and right are as viewed from behind the han-  
dlebar, in the direction of forward travel.  
This handbook is based on information available at the time of publication.  
HAYTER LIMITED reserve the right to amend product specifications without prior notification.  
1.4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY  
LIMITED WARRANTY  
Hayter Limited warrants to the original user/purchaser that this unit shall be free from  
defects in material or workmanship under normal use for a period of two years from the  
date of purchase. To qualify for the full benefit of the warranty, the warranty registration  
card must be returned to Hayter Limited within 14 days of purchase. If the selling dealer  
has not returned the Warranty Registration Card which is attached to the rear of the Owners  
Handbook please complete and return. Subject to the conditions and exclusions noted in  
this limited warranty, we shall at our option, repair or replace any warranted part during the  
applicable period. If you are in any doubt or experience any difficulty, please consult a  
Hayter Authorised Service Dealer for clarification.  
A 90 day warranty period applies to those items which are subject to normal wear and tear  
e.g. wheels, cutterblades, cables, grassbags and other consumable wearing parts.  
This warranty does not apply to any unit that has been tampered with, altered, misused,  
abused or used for hire, and will become invalid if non genuine Hayter parts are fitted. This  
warranty does not cover minor mechanical adjustments unless they are due to defective  
material or workmanship. Consult the Owner's Handbook or a Hayter Authorised Service  
Dealer for assistance when making these adjustments.  
The machines are not warranted for commercial use.  
To make a warranty claim, return the unit to a Hayter authorised service dealer along with  
proof of purchase stating the machine serial number and date of purchase. Subject to the  
conditions and exclusions in this limited warranty, the authorised dealer will, at our option,  
repair or replace any warranted part within the duration of the warranty period.  
This limited warranty gives specific legal rights and is in addition to any statutory rights to  
which you may be entitled and your statutory rights are not affected by this warranty. If  
you need additional information concerning this written warranty, or assistance in obtain-  
ing services, please write to: Hayter Limited, Service Department, Spellbrook, Bishop's  
Stortford, Hertfordshire, CM23 4BU  
UK ONLY: Details of your local Hayter authorised dealer are contained in The Yellow  
Pages or contact:- Freephone 0800 616298: or visit the Hayter website at  
1.5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY PRECAUTIONS  
Safety Alert Symbol  
This safety alert symbol indicates important safety messages. When  
you see this symbol be alert to the possibility of injury. Carefully read  
the following and inform others.  
Your mower is perfectly safe if used correctly. Failure to observe the  
following precautions may result in serious injury.  
Training  
Read the instructions carefully. Ensure that you are familiar with the  
controls and the proper use of the equipment. Learn how to stop the  
mower quickly in an emergency.  
Never allow children or people unfamiliar with these instructions to  
use the mower.  
Never mow while people, especially children, or pets are nearby.  
Keep in mind that the user is responsible for accidents or hazards  
occurring to other people or their property.  
Preparation  
It is recommended that a high sensitivity Residual Current - Operated  
Circuit - Breaker (RCCB) with a trip current of not more than 30mA  
is installed at the mains power socket. This will provide the user with  
additional protection against electric shock. The fuse installed in the  
plug only provides protection for the electrical equipment and will not  
safeguard against electrocution. Always check the RCCB before using  
the mower.  
WARNING: Regularly inspect the supply cable for signs of damage  
or ageing. Replace immediately if defective.  
Always wear substantial footwear and long trousers while mowing. Do  
not operate the equipment when barefoot or wearing sandals.  
Thoroughly inspect the area where the mower is to be used and remove  
all stones, sticks, wires, bones and other foreign objects.  
1.6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY PRECAUTIONS  
Preparation  
Always ensure that the mower is in a safe operating condition.  
Frequently check all nuts, bolts and screws for tightness. Use only gen-  
uine Hayter parts.  
A damaged cutterblade and loose fixing bolt are major hazards. Before  
use, visually inspect the cutting mechanism to ensure that it is in good  
condition. A damaged cutterblade must be replaced immediately with  
a genuine Hayter replacement part. Cutterblades which are slightly  
worn can be resharpened. Ensure that both cutting edges are resharp-  
ened equally to maintain balance.  
An unbalanced cutterblade may cause serious damage to your  
machine.  
Refer to "Maintenance."  
Operation  
SWITCH OFF AND REMOVE PLUG FROM MAINS.  
- Before clearing blockages or unclogging the discharge chute.  
- Before cleaning, checking or working on the mower.  
- Whenever you leave the mower.  
- After striking a foreign object. Inspect the mower for damage  
and make repairs before re-starting and operating the mower.  
- If the mower starts to vibrate abnormally (check immediately).  
- If the supply cable is entangled.  
THE CUTTERBLADE CAN CONTINUE TO ROTATE AFTER  
THE MACHINE IS SWITCHED OFF.  
Keep the supply cable clear of the cutterblade at all times.  
Do not mow across the supply cable. Immediately disconnect the cable  
from the mains supply if this occurs and check for damage. Do not use  
a defective supply cable.  
Mow only in the daylight or in good artificial light.  
Avoid using the mower on wet grass, where feasible.  
Always be sure of your footing on slopes.  
Walk, never run.  
Mow across the face of slopes, never up and down.  
Exercise extreme caution when changing direction on slopes.  
Do not mow excessively steep slopes.  
1.7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY PRECAUTIONS  
Operation  
Use extreme caution when reversing or pulling the mower towards you.  
Switch off if the mower has to be tilted for transportation when cross-  
ing surfaces other than grass and when transporting the mower to and  
from the area to be mowed.  
Never operate the mower unless the guards are securely in position and  
in good condition.  
Start the mower carefully, with feet well away from the cutterblade.  
Do not tilt the front of the mower more than is absolutely necessary  
when starting.  
Never lift the rear of the mower.  
Do not put hands or feet near or under rotating parts.  
Never pick up or carry a mower while it is running or connected to the  
mains supply.  
Do not lift the rear deflector plate whilst the mower is in operation,  
particularly when using without a grassbag.  
Maintenance & Storage  
Keep all nuts, bolts and screws tight to ensure that the mower is in a  
safe working condition. (For torque settings refer to mower mainte-  
nance).  
Carefully examine the supply cable for signs of damage or ageing.  
Replace immediately if defective.  
Check the grassbag frequently for wear or deterioration and replace if  
necessary.  
Wear strong work gloves when removing and reassembling the cut-  
terblade.  
Replace worn or damaged parts for safety.  
1.8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY PRECAUTIONS  
Safety Symbols  
Danger of being hit by thrown  
objects.  
Safety Alert - Be aware to the  
possibility of injury.  
Danger of severing toes or fin-  
gers in cutting mechanism.  
Carefully read the Owners  
Handbook before using the  
machine.  
Switch off and remove plug  
from mains before performing  
maintenance or repair work.  
Keep bystanders at a safe dis-  
tance from the mower.  
Do not use in rain or in wet  
conditions.  
Wait until all machine compo-  
nents have stopped before  
touching them.  
STOP  
Control Symbols  
Switch ON / OFF  
(Symbol)  
Height of Cut Adjustment  
(Symbol)  
305113  
1.9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING THE MOWER  
Delivery Checklist  
Remove the mower from the packaging and check that the following  
items have been supplied correctly. If any items are missing contact,  
your local Hayter dealer.  
1. Instruction Sheet 2. Grassbag Frame 3. Grassbag Top Cover  
4. Grassbag Fabric 5. Supply Cable  
To prevent accidents cut off the long ribbon attached to the grass-  
bag and discard.  
Handlebar  
Unscrew the handlebar securing knobs sufficiently to allow the handle-  
bar to pivot. Unfold the handlebar to the operating position. Tighten all  
handlebar knobs to secure the handlebar in position.  
Take care to ensure that the power cable does not become snagged at  
the pivot points.  
Grassbag Attachment  
Once the grassbag is assembled. Raise the rear deflector, pass the  
grassbag under the handlebar and hook in position. Lower the deflec-  
tor to rest on the grassbag.  
Supply Cable  
Route the supply cable loosely across to the cable cleat on the left side  
of the handlebar. Make a loop in the supply cable and secure to the  
cable cleat.  
1.10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING THE MOWER  
Electrical Connection  
Position the mower on the grass area to be cut. Carefully uncoil the  
supply cable clear of the mower. Ensure that the mains socket is  
switched 'OFF' before connecting. Switch 'ON'.  
Note: We recomend the use of a RCCB unit- Refer to "Safety  
Precautions" - Preparation.  
Starting  
Locate the bail arm lever mounted on the handlebar and ensure that  
your feet are clear of the mower deck. Depress the safety button with  
the right hand and pull the bail arm towards the handlebar with the left  
hand. The motor will now start.  
Forward Travel  
Hold and push against the handlebar with both hands to move the  
mower forwards.  
Turning  
To make a wide turn steer the mower with the handlebar whilst travel-  
ling forward.  
To make a tight turn apply downward pressure on the handlebar to  
raise the front wheels of the mower just above ground level and steer  
the mower using the handlebar in the required direction.  
To prevent accidents do not raise the front of the mower exces-  
sively when making a turn. Never raise the rear of the mower  
when the motor is running.  
1.11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING THE MOWER  
Stopping  
Release the bail arm to stop the motor.  
WARNING: AVOID ACCIDENTS - The cutterblade may contin-  
ue to rotate after the mower is switched off  
Height of Cut  
Move the height of cut lever sideways to disengage it from the locking  
notch, then push forwards to lower or pull backwards to raise the height  
of cut. Release the lever in the required position and ensure that it locks  
firmly into one of the seven notch settings.  
3 0 5 3  
Always select a height of cut to suit operating conditions. Prevent  
motor overloading and blockages by avoiding low cuts in long grass  
conditions. Be prepared to make two cuts when the grass is long.  
305113  
Before Mowing  
To prevent accidents thoroughly inspect the area and remove all  
objects which when contacted by the mower cutterblade could  
become dangerous projectiles. Inspect the area for hidden obstruc-  
tions which when contacted by the cutterblade could risk health  
and safety. Remember the location of these obstructions and  
ensure that you mow around them.  
1.12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING THE MOWER  
Grassbag  
To empty the grassbag raise the rear deflector and pass the grassbag  
under the handlebar and lower the rear deflector to rest against the rear  
of the mower.  
Pour out the grass clippings and shake the grassbag vigorously to clean  
the airways. Good grass collection depends on good air flow through  
the grassbag. When collecting grass clippings it is important that the  
grassbag is emptied regularly to prevent blockages and motor over-  
loading.  
Without Grass Collection  
Remove the grassbag and operate the mower with the rear deflector in  
the closed position.  
Heavy Growth  
Areas of heavy growth should be mown without collecting the clip-  
pings. If collection is required, first mow the area without the grass-  
bag at the maximum height of cut setting. Allow the grass clippings to  
dry out and then mow the area at the maximum height of cut setting  
with the grassbag fitted. Reduce the height of cut and mow the area  
again as necessary until the required finish is obtained.  
3 0 1 3  
305113  
To prevent grass damage do not remove more than one third of grass  
height in one cut.  
Non-Grassed Areas  
When moving the mower across non-grassed areas, stop the motor and  
set the mower to the maximum height of cut to protect the cutting  
mechanism.  
1.13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING THE MOWER  
Safe Mower Practice  
WARNING: PREVENT ACCIDENTS -Take extreme care do not  
mow across the supply cable. If this should occur, switch off immedi-  
ately and disconnect the plug from the power supply. Carefully exam-  
ine the cable for cuts and damage. A defective cable must be replaced  
before the mower is used again. Always be aware of the location of the  
supply cable in relationship to the mower and the grass area. Do not  
allow the cable to become hidden in uncut grass. Keep the cable over  
the cut area at all times. A cable which is out of sight is out of mind  
and this could lead to a hazardous situation. Plan a 'cutting scheme'  
which works away from the power supply point and ensures that the  
cable is trailed out over the cut area. Work up and down the lawn in  
rows. Turn the machine round at the end of the row and step across the  
cable so that the cable is trailed along in the cut area on the return run.  
When working around flower beds, prevent the cable from trailing  
across the cultivated area by positioning a stake at the corner of the  
bed. Do not allow the cable to be pulled around sharp obstructions.  
Stop mowing immediately if cable resistance is felt and remove the  
obstruction. Do not allow the cable to become entangled.  
WARNING: PREVENT ACCIDENTS - Switch off at the mains,  
remove the plug before adjusting, cleaning or if the cable is entan-  
gled.  
1.14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING THE MOWER  
Overloading Protection  
Do not let the motor labour or slow down through being overloaded in  
work. When this situation occurs, raise the front of the mower slightly  
by bearing down on the handlebar, allow the motor to reach maximum  
speed and proceed to mow at a slower pace. Alternatively readjust to a  
higher cut position. If the motor continues to labour, switch off and  
remove the plug from the mains supply. Remove and empty the grass-  
bag. Examine the discharge chute and remove any blockage. Turn the  
machine on its side and clear any obstruction from the cutterblade and  
the underside of the mower deck. Place the machine upright and  
replace the grassbag. Readjust to a higher cut position if necessary.  
Restart the mower and proceed to mow at a pace which does not over-  
load the mower.  
IMPORTANT: PREVENT DAMAGE - DO NOT continue to  
operate the motor in an overloaded condition. If this does occur,  
stop mowing and allow the motor to run at maximum speed for  
one minute. This will allow the motor to cool down to its normal  
working temperature.  
1.15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LAWN CARE CALENDAR  
To be used as a guide only.  
January  
There is very little work to do this month apart from brushing away  
leaves. Keep off the grass if frozen or waterlogged.  
February  
Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil  
organisms and root growth and apply lawn sand if necessary.  
March  
The yearly lawn work programme really starts this month. As soon as  
the ground conditions are suitable, the first cut can be made. The first  
cut should merely “top” the grass as close cutting at this stage could  
result in severe yellowing or browning. Two cuts are generally suffi-  
cient this month.  
April  
Mow often enough to stop grass growing away. Dig out patches of  
coarse grass or resistant weed. Re-seed bare patches.  
May  
Keep mowing increasing the frequency as required. Treat with selec-  
tive weed killers or combined weed/feed preparations if you did not  
feed the lawn in April.  
June  
Summer mowing should now be under way. It should be necessary to  
mow the lawn twice a week. Raking before mowing is important this  
month as the combined action keeps runners of clover under control.  
Water the grass if necessary, and remember to soak thoroughly.  
July  
Treat the grass with the second application of fertiliser or weed  
killer/fertiliser. Water when necessary and rake occasionally. As a gen-  
eral rule the grass clippings should be removed each time you mow. If  
weather conditions are dry and hot and the grass is weed free, leave the  
clippings on the lawn to help maintain ground moisture.  
1.16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LAWN CARE CALENDAR  
August  
Keep mowing regularly and watering as necessary. Fill any cracks  
caused by drought with a mixture of sharp sand and soil. In dry weath-  
er conditions leave the grass longer to help retain ground moisture.  
September  
Raise the height of cut to allow the grass to thicken and protect the  
roots from the winter frost and snow.  
October  
Rake out the thatch from the turf and spike the lawn to assist in  
drainage. Brush in peat and sharp sand.  
November  
Use a stiff broom to disperse worm casts before mowing. Keep turf  
free from leaves.  
December  
Apart from brushing away leaves, December is a slack end of a busy  
year. Keep off the lawn if it is very wet or frozen.  
Lawn Stripes  
1
2
The way to achieve a neat striped effect is for the lawn being cut in  
parallel stripes, alternate stripes being mown in opposite directions. A  
much more important routine is to cut at right angles to the line of the  
previous mowing. If the work has been carried in a north-south line,  
then the next cutting should be in an east-west direction. The cross-  
cutting keeps down the coarse weed grasses.  
1CG480V05A  
To prevent grass damage do not remove more than one third of the  
grass height in one cut.  
1.17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE SCHEDULE  
Follow the hourly or calendar intervals, whichever occurs first. More  
frequent service will be required if working for prolonged periods  
under dusty, dry conditions, or when airborne debris is present or after  
extensive operation cutting tall, dry grass.  
Daily  
Remove grass debris from around the height of cut ratchet, air filter in the  
cowl and the underside of the deck housing.  
Remove grass debris from the grassbag and check for signs of damage.  
Check the condition of guards and safety devices.  
Check condition of cutterblade.  
25-50Hrs or Every Season  
Lubricate wheels, pivot points and linkages.  
Sharpen the cutterblade.  
Flash test (Dealer) to ensure complete safety.  
Check cables/switch and connection  
Replace air filter  
1.18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MOWER MAINTENANCE  
Deck Housing  
Remove grass debris from the top and underside of the deck housing  
immediately after use.  
Securing Fasteners  
Regularly check that all securing nuts and bolts are tight. Replace  
missing or damaged items immediately.  
Bolt - Cutterblade fixing Torque 20Nm  
Plastic Screws - Bottom of Handlebar Torque 3.5Nm  
General Screws - Used on plastic parts 1.5Nm (Note: Use manual  
handtools only).  
1CG480V36B  
Lubrication  
Lubricate the wheels, pivot points and linkages with engine oil every  
25 operating hours.  
Motor  
The motor is maintenance free.  
Switch Control Unit  
The switch control unit is maintenance free.  
1.19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
MOWER  
Cutterblade Removal  
Turn the mower on its side.  
Firmly grip the end of the cutterblade (2) with a gloved hand and  
remove bolt (1). When replacing ensure that the new cutterblade is the  
2
correct way up with the turned edges facing towards the motor before  
locating onto the two carrier pins. Secure the cutterblade fixing nylon  
bolt and tighten to the specified torque of 20Nm.  
1
The cutterblade has sharp edges. ALWAYS wear strong gloves to  
protect your hands when working on the cutterblade. DO NOT  
rotate tools towards the cutting edges to avoid the risk of injury  
should the tool slip. ALWAYS use genuine Hayter replacement  
parts.  
The condition of the cutterblade and its mounting arrangement should  
be checked regularly for signs of wear or damage. Ensure that the cut-  
terblade is not bent or cracked.  
A damaged cutterblade that is out of balance will vibrate excessively  
and may break. DO NOT use an unbalanced cutterblade.  
Regularly check that the bolt securing the cutterblade is tightened  
to the specified torque of 20Nm.  
Replace the cutterblade every 2 years or sooner if excessively worn or  
damaged.  
To prevent injury it is wise to seek assistance when turning the mower  
on its side.  
1.20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MOWER MAINTENANCE  
Cutterblade Sharpening  
A slightly worn cutterblade may be re-sharpened. Both blade edges  
must be sharpened equally to ensure balance. Sharpen the cutterblade  
every 25 mowing hours or more frequently if conditions require.  
Remove the cutterblade from the mower and clean using a brush and  
water. Inspect the cutterblade for signs of damage. Sharpen both cut-  
ting edges with a flat file to restore performance.  
30°-45°  
Ensure that the cutterblade is balanced. Use a screw driver with a  
round shaft to support the cutterblade through its centre hole. Hold the  
cutterblade horizontal and then release. A balanced cutterblade will  
remain horizontal.  
If the cutterblade is not balanced the heavy end will rotate downwards.  
Sharpen the heavy end until the cutterblade is correctly balanced.  
Supply Cable  
Check the condition of the supply cable for damage or ageing. Replace  
immediately if defective.  
1.21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
Storage  
MOWER  
Handlebar storage: To collapse the handlebar first unscrew the two  
top securing knobs to allow the top section of the handlebar to pivot  
forward to rest against the middle section then unscrew the bottom two  
securing knobs sufficiently to allow both top and middle sections to be  
folded forwards.  
Storage for long periods: To ensure your mower is maintained in  
good working order it is important that the following procedure is  
adopted when the mower is stored for periods in excess of one month.  
Refer to the Maintenance section as necessary.  
Clean all areas of the mower and ensure that the grassbag is clean.  
Lubricate the mower.  
Treat metal parts with a water repellent anti-corrosion product.  
Lower the handlebar if desired.  
Cover the mower with a protective sheet and store it in a dry area.  
Rest the mower deck on wooden blocks to remove the weight of the  
mower from its wheels / roller.  
1.22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLE SHOOTING  
PROBLEM  
POSSIBLE FAULT  
REMEDY  
Motor fails to start.  
Mains supply socket dead.  
RCCB tripped.  
Test socket by plugging in anoth-  
er appliance.  
Remove mower plug and check  
RCCB action. Check the supply  
cable for any obvious signs of  
damage and replace immediately  
if defective. If no obvious faults  
are found a serious fault is indi-  
cated. Contact your Hayter  
Dealer.  
Plug pulled out of mains  
socket.  
Re-engage plug.  
Fuse failure.  
Fit a new 13 amp fuse.  
Supply cable damaged.  
Disconnect from the mains and  
check the supply cable for any ob-  
vious signs of damage. Replace  
immediately if defective.  
Cutterblade obstructed.  
Disconnect from the mains and  
remove any obstructions.  
Motor will not stop.  
Faulty switch control unit.  
Ensure switch lever has returned  
to the 'OFF' position. Disconnect  
from the mains and contact your  
Hayter Dealer.  
Cutterblade runs on exces-  
sively after switching  
'OFF'.  
Faulty brake unit.  
Contact your Hayter Dealer.  
1.23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLE SHOOTING  
PROBLEM  
POSSIBLE FAULT  
Mounting bolts loose.  
Cutterblade bolt loose.  
Cutterblade out of balance.  
REMEDY  
Motor vibrates excessively.  
Tighten bolts.  
Tighten bolt.  
Balance cutterblade.  
Uneven cut  
Undulating ground contours.  
Cutterblade worn.  
Change direction of travel.  
Sharpen the cutterblade.  
Balance cutterblade.  
Cutterblade out of balance.  
Wheels / Roller damaged.  
Inspect and replace as necessary.  
Discharge chute blocks.  
Grass is wet.  
Mow dry grass.  
Cut height too low.  
Grassbag full.  
Increase cut height.  
Empty grassbag.  
Clean the grassbag.  
No airflow through the  
grassbag.  
Mower is hard to push.  
Poor grass collection.  
Cut height too low.  
Increase cut height.  
Wheels / Roller damaged.  
Inspect and lubricate or replace  
as necessary.  
No airflow through the  
grassbag.  
Clean the grassbag.  
Discharge chute blocked.  
Wet grass.  
Remove blockage.  
Mow dry grass.  
Empty grassbag.  
Grassbag full.  
1.24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EC DECLARATION OF CONFORMITY  
Manufactured for: HAYTER LIMITED,  
Spellbrook, Bishop’s Stortford, Herts, CM23 4BU. ENGLAND  
declare that the lawnmower:  
Type.  
Model name:  
Model No:  
Pedestrian Rotary Electric Lawnmower  
Envoy  
Code 100C/101C  
360 mm  
2950 rpm  
Suzhou Taihu  
2950 rpm  
Cutting width:  
Speed of rotation of cutting device:  
Motor manufacturer:  
Speed of rotation of motor:  
Complies with the provisions of Directive: 98/37/EC Essential Health & Safety  
Requirements relating to the Design & Construction of Machinery and Safety Components, as  
amended and the regulations transposed into national law.  
Also Directive 89/336/EEC Electromagnetic Compatibility, as amended and the regulations  
transposed into national law.  
Also Directive 73/23/EEC Low Voltage, as amended and the regulations transposed into  
national law.  
Also Directive 2000/14/EC Noise emission in the environment by equipment for use outdoors  
and the regulations transposed into national law.  
Procedure applied for the conformity assessment: ANNEX VI, procedure 1.  
Notified Body: ITS Testing & Certification, Cleve Road, Leatherhead,  
Surrey, KT22 7SB. ENGLAND.  
Notified body identification No: 0359.  
Measured sound power level:  
Guaranteed sound power level:  
88 dB(A)  
96 dB(A)  
Complies with harmonized standards: EN 292, EN 836, EN 55014 - 1, EN 55014 - 2,  
EN 61000 -3 - 2 & EN 61000 - 3 - 3  
Authorised Signature  
Date: September 2004  
Declaration done and Technical  
Documentation Kept at:  
HAYTER LIMITED,  
Spellbrook, Bishop’s Stortford,  
Herts CM23 4BU ENGLAND  
Steve Maryniak  
(Technical Director)  
VIBRATION INFORMATION  
Hand/arm vibration level measured to the procedure in European Standard EN 836  
CODE 100C = 6.1 ms-2 CODE 101C = 6.1 ms-2  
1.25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS LIST  
DESCRIPTION  
ITEM NO.  
PART NO.  
QTY.  
ITEM NOTE  
1
2
3
4
5
6
7
8
Motor  
Capacitor  
Underdeck  
Throw Plate  
Wheel - Wide Assy  
Bearing - Wheel  
Hub - Cap  
Starlock 12mm  
Rod - Rear Axle  
Wheel - Thin Assy  
Lever - HOC  
100001  
100002  
100003  
100004  
100506  
100033  
100036  
100047  
100068  
100505  
100038  
100041  
100504  
100064  
100078  
100013  
100012  
100014  
100037  
100048  
100503  
100006  
100076  
100125  
410087  
100011  
410064  
100082  
100010  
100026  
100025  
100024  
100515  
100128  
100017  
100510  
100512  
100028  
100007  
100126  
1
1
1
1
2
12  
4
4
1
4
1
1
1
4
51  
1
1
1
1
3
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
1
1
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
Spring - HOC  
Rear Axle Assy  
Plate - Axle Pivot  
Screw - M4  
Bolt - Fixing Cutterblade  
Cutterblade  
Carrier - Cutterblade  
Rod - Connecting  
Starlock - 8mm  
Axle - Front Assy  
Fins - Front  
Bolt - Motor  
Cover - Main  
Decal - Hayter  
Filter  
Decal - Grass Blade  
Decal - Envoy  
Cover - Air Vent  
Handlebar - lower  
Handlebar - Middle  
Handlebar - Upper  
Switch - Assy/ Trailing Lead  
Screw - M4 x 19  
Bail Arm  
Mount - Bail Arm Assy  
Hand Wheel - Assy  
Bolt - Handlebar  
Deflector - Rear  
Rod - Deflector  
1.26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS LIST  
DESCRIPTION  
ITEM NO.  
PART NO. QTY.  
ITEM NOTE  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
Spring - Deflector  
Knob - HOC  
Ratchet - HOC  
Washer - Spring M8  
Grassbag - Fabric/base  
Frame - Grassbag  
Top - Grass Bag  
Screw - M6 x 20  
Bolt - Plastic Handlebar  
Fan - Motor Top  
Spacer - Rear Wheel  
Pin - Spring HOC  
Spring - Counter Balance  
Cleat - Cable  
100009  
100039  
100040  
100119  
100513  
100016  
100075  
100127  
100029  
100019  
100030  
100042  
100080  
100105  
100077  
100079  
100502  
100023  
100106  
100135  
1
1
1
4
1
1
1
2
2
1
6
1
1
1
1
2
1
4
4
1
1
Terminal Block  
Washer - Grip M10  
Grassbag - Assy  
Cable - Tie  
Washer - M8  
Main Lead - 17m UK Assy  
Inc. 45,46 & 47  
Main Lead - 17m European Assy 100136  
1.27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS LIST  
35  
33  
36  
58  
15  
34  
15  
15  
32  
37  
54  
15  
58  
60/61  
38  
38  
37  
58  
31  
37  
38  
38  
47  
30  
39  
37  
42  
48  
29  
26  
41  
15  
40  
28  
27  
43  
24  
45  
46  
57  
25  
56  
49  
50  
55  
15  
1
3
2
20  
59  
4
44  
19  
23  
15  
15  
51  
5
15  
10  
6
15  
6
15  
11  
6
15  
53  
8
5
7
52  
6
7
51  
18  
8
51  
10  
20  
6
51  
13  
6
12  
6
17  
14  
15  
16  
21  
14  
51  
15  
14  
15  
6
6
14  
19  
20  
22  
10  
10  
9
15  
6
8
6
7
7
15  
15  
8
15  
1.28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES  
Notes:-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.29  
NOTES  
Notes:-  
1.30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES  
Notes:-  
1.31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMER  
INFORMATION  
Serial No:  
Motor Type 220-240V~50Hz (100C/101C)  
Date of Sale:-  
Your Local Dealer:-  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Land Pride Lawn Mower FM20 Series User Guide
Lawn Boy 10734 Manual User Manual
Sears Lawn Mower 91737283 User Guide
Snapper Lawn Mower 167 User Manual
Snapper Lawn Mower LP21550V User Manual
Snapper Lawn Mower NP2187520BV 7800439 User Manual
Snapper Lawn Mower W36121 User Manual
Snapper Lawn Mower ZM2200K ZM2200KU ZM2500K ZM2500KH MZM2200KH ZM5200M ZM6100M User Guide
Walker Lawn Mower DB6660 User Guide
Weed Eater Lawn Mower 163600 User Guide