Hover Mowers
& Hovertrim
OWNER'S HANDBOOK
MODELS:
446 Hovertrim
450 Professional
453 Professional
(English Version)
ISSUE 02.03.07
PART NUMBER: 111-1270 (A)
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
SPECIFICATIONS
MAIN
Main Features
8
1.
2.
3.
4.
5.
6.
7.
8.
9.
Spark Plug/Lead.
Exhaust Guard.
Engine Cover.
Serial No.Label.
Engine Start-Grip.
Handlebar Securing Knob.
Throttle Control.
Engine Stop Lever.
Handlebar.
9
7
6
10. Fuel Cap.
11. Oil Dipstick.
12. Fuel On/Off Tap.
13. Air Cleaner.
5
10
4
11
3
2
12
13
1
DTP-000-010-A
Specifications
Code
180
181
182
Model
446
450
453
Engine
Honda
Honda
GCV160
Honda
GCV160
Engine type
Fuel type
GCV135
Unleaded petrol
0.9 litres
SAE 10W-30
.55 litres
46 cm (18”)
17.6kg
Unleaded petrol
1.1 litres
Unleaded petrol
1.1 litres
Fuel capacity
Engine Oil type
Oil sump capacity
Cutting width
Dry Weight
SAE 10W-30
.55 litres
SAE 10W-30
.55 litres
51cm (20”)
19kg
53cm (21”)
19kg
1.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1.3 Main Features/Specifications
1.5 Contents
1.22 - 1.23 Trouble Shooting
1.24 - 1.27 Parts List
1.24
1.25
1.26
1.27
1.28
1.29
- Mainframe Parts List
- Exploaded View - Mainframe
- Blade Options / Kits Parts List
- Exploded View - Blade Options / Kits
- Kit Options Parts List
1.6 Introduction
1.7 Warranty
- Exploded View - Kit Options
1.8 - 1.11 Safety Precautions
1.8
1.8 - 1.9
1.9 - 1.10
1.10 - 1.11
1.11
- Training
- Preparation
- Operation
- Maintenance and Storage
- Safety Symbols
- Decal Symbols
1.30 Notes
1.31 Customer Info
1.11
1.12 Assembling the Mower
1.12
1.12
- Delivery Checklist
- Assembling
1.13
1.13
1.13
1.13
1.13
Before Starting the Mower
- Prevent Engine Damage
- Oil Type
- Check Oil Level
- Fuel Type
1.14 - 1.19 Operating The Mower
1.14
1.14
1.15
1.15
1.16
1.16
- Controls
- Starting
- Cutting Grass
- Stopping
- Adjusting the Cutting Height
- Before Mowing
1.17 - 1.21 Mower Maintenance
1.17
1.17
1.17
1.18
1.18
1.19
1.19
1.19
1.20
1.20
1.21
- Engine
- Carburettor Adjustments
- Air Cleaner Service
- Spark Plug Service
- Keeping Engine Clean
- Deck Housing
- Securing Nuts and Bolts
- Oil Service
- Cutterbar Removal
- Flexiblade Replacement
- Storage
1.5
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Thank you for purchasing an Allen machine. The following pages are designed to help you
gain safe and efficient service from your machine.
IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives
essential information regarding mower safety, operation, maintenance and specifications. Read
and understand this handbook prior to operating your machine for the first time. Make sure you
are familiar with all the controls and points of regular maintenance. If you have any doubts,
consult your local authorised dealer who will be pleased to give you assistance.
IMPORTANT: This machine is designed solely for cutting grass and other low lying ground
vegetation within the limitations stated in this manual. Use in any other way is considered as
contrary to the intended use. Compliance with and strict adherence to the conditions of opera-
tion, service and repair as specified in this handbook also constitute essential elements of the
intended use.
This machine should be operated, serviced and repaired only by persons who are familiar with
its particular characteristics and who are acquainted with the relevant safety procedures.
The safety precautions listed in this handbook and all other generally recognised regulations on
safety must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve the manufacturer of
liability for any resulting damage or injury.
Allen machines are robustly constructed and designed for efficient economical
performance under normal mowing conditions. Correct operation and maintenance will ensure
a long and satisfactory service life. Prior to despatch from our factory every effort is made to
ensure that your mower is delivered in perfect condition.
Throughout this handbook all references to left and right are as viewed from behind the han-
dlebar, in the direction of forward travel.
This handbook is based on information available at the time of publication.
We reserve the right to amend product specifications without prior notification.
1.6
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
LIMITED WARRANTY
The Allen mower business is a subsidiary of Hayter Limited.
The manufacturer warrants to the original user/purchaser that this unit shall be free from defects in
material and workmanship under normal use and service for a period of one year from the date of
purchase. The manufacturers of the engine furnish their own warranty and services are provided
through their authorised network (Refer to "Engine Warranty Statement"). To qualify for the full
benefit of the warranty, the Warranty Registration Card must be returned within 14 days of pur-
chase. If the selling dealer has not returned the Warranty Registration Card please complete and
return. Subject to the conditions and exclusions noted in this limited warranty, we shall at our
option, repair or replace any warranted part during the applicable period. If you are in doubt or
experience any difficulty, please consult an Authorised Service Dealer for clarification.
A 90 day warranty period applies to those items which are subject to normal wear and tear e.g.
wheels, cutterbars, flexiblades, cables and other consumable wearing parts.
This warranty does not apply to any unit that has been tampered with, altered, misused, abused or
used for hire, and will become invalid if non genuine parts are fitted. This warranty does not cover
for minor mechanical adjustments unless they are due to defective material or workmanship.
Consult the Owner's Handbook or an Authorised Service Dealer for assistance when making these
adjustments.
To make a warranty claim, return the unit to an Authorised Service Dealer along with proof of pur-
chase stating the machine serial number and date of purchase. Subject to the conditions and exclu-
sions in this limited warranty, the authorised dealer will, at our option, repair or replace any war-
ranted part within the duration of the warranty period.
This limited warranty gives you specific legal rights and is in addition to any statutory rights to
which you may be entitled and your statutory rights are not affected by this warranty. If you need
additional information concerning this written warranty, or assistance in obtaining services, please
write to : HAYTER LIMITED, Service Department, Spellbrook, Bishop's Stortford,
Hertfordshire CM23 4BU
UK ONLY: Details of your local authorised dealer are contained in Yellow Pages and the Hayter
1.7
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Safety Alert Symbol
This safety alert symbol indicates important safety messages. When
you see this symbol be alert to the possibility of injury. Carefully read
the following and inform others.
Your machine is perfectly safe if used correctly. Failure to observe the
following precautions may result in serious injury.
Training
Before using the machine read the owners handbook carefully. Pay
particular attention to the safety precautions. Ensure that you are
familiar with the controls and the proper use of the equipment. Learn
how to stop the machine quickly in an emergency.
Never allow children or people unfamiliar with these instructions to
use the machine.
Never operate while people, especially children, or pets are nearby.
Keep in mind that the user is responsible for accidents or hazards
occurring to other people or their property.
Preparation
While using the machine, always wear substantial footwear and long
trousers. Do not operate the equipment when barefoot or wearing san-
dals.
Thoroughly inspect the area where the machine is to be used and
remove all objects which may be thrown by the machine.
WARNING: Petrol is highly flammable.
- Store fuel in containers specifically designed for this purpose.
- Before starting the engine add fuel outdoors only. Never remove the
cap from the fuel tank or add petrol while the engine is running or
when the engine is hot. Allow the engine to cool for at least two min-
utes before refuelling. Do not smoke while refueling.
- Do not attempt to start the engine if petrol is spilled or a smell of
petrol is present. Move the machine away from the area of spillage
and avoid creating any source of ignition until petrol vapours have
dissipated.
- Replace faulty silencers.
1.8
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Preparation
- Always use fresh fuel. Stale fuel can block the carburettor and cause
leakage.
- Replace fuel tank and oil tank caps securely.
A damaged cutter device or impeller or both must be replaced. Before
use, always visually inspect the cutting mechanism to ensure that it is
in good condition. Do not operate the machine with an out of balance
cutting device or impeller.
-
Check all nuts and bolts and tighten when necessary.
Operation
Do not operate the engine in a confined space where exhaust fumes
(carbon monoxide) can collect. Refuel outdoors only and do not smoke
while refuelling.
Always pull the starter cord slowly until resistance is felt. Then pull
the cord rapidly to avoid kickback and prevent hand or arm injury.
Operate only in daylight or good artificial light.
Avoid using the machine on wet grass, where feasible.
Always be sure of your footing on slopes.
Walk, never run.
Operate across the face of slopes, never up and down.
Exercise extreme caution when changing direction on slopes.
Do not use on excessively steep slopes.
Use extreme caution when pulling the machine towards you.
Stop the engine before moving the machine across areas other than
grass.
Do not change the engine governor settings or overspeed the engine.
Start the engine carefully, with feet well away from the cutting device.
1.9
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Operation
Do not put hands or feet near or under rotating parts.
Never pick up or carry the machine while the engine is running.
Never touch the exhaust/exhaust guard or cooling fins when the engine
is hot.
Stop the engine and disconnect the spark plug lead:
- Before clearing blockages.
- Before cleaning/checking or working on the machine.
- After striking a foreign object. Inspect the machine for damage
and ensure necessary repairs are made before re-starting.
- If the machine starts to vibrate abnormally (check immediately).
(An out of balance cutting device causes severe vibration).
Stop the engine:
- Whenever you leave the machine.
- Before refuelling.
Maintenance & Storage
Keep all nuts, bolts and screws tight to ensure that the equipment is in
safe operating condition.
Frequently check fuel lines and fittings for cracks or leaks and replace
if necessary.
Never check for a spark when the spark plug is removed. (Use approved
tester)
Inspect the exhaust periodically and replace if worn or leaking.
Never crank the engine with the spark plug removed.
Never start the engine with the air-cleaner or air-cleaner cover
removed.
Never store the machine with petrol in the tank within an enclosed area
where fumes may reach an open flame or spark.
Allow the engine to cool before storing in any enclosure. To reduce the
fire hazard, keep the engine and the surrounding deck area free of
grass, leaves, or excessive grease.
1.10
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Maintenance & Storage
If the fuel tank has to be drained, this should be done outdoors and
when the engine is cool.
Wear strong work gloves when removing and reassembling the cutting
device.
Always replace worn or faulty parts with genuine Allen parts.
Safety Symbols
Danger of being hit by
thrown objects.
Danger of severing toes or
fingers in cutting mechanism.
Safety Alert - Be aware to the
possibility of injury.
Carefully read the Owners
Handbook before using the
machine.
Stop engine and remove
spark plug lead before
working on the mower.
Keep bystanders at a safe
distance from the mower.
HAY-G00006-A
Protective footwear
should be worn.
Hearing protection
should be worn.
HAY-G00007-A
HAY-G00008-A
Information Symbols
Throttle Control
Engine Stop
Engine Stop
DTP-000-012-A
1.11
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING THE MOWER
Delivery Checklist
6
5
Remove the machine from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local dealer. Main deck, lower and upper handlebars.
1
7
8
2
1. Handlebar bolt x 2
2. Bush x 4
3. Nut x 2
5. Throttle bolt x 2
6. Washer x 4
7. Spring washer x 2
8. Nut x 2
9. Spanner x 1*
10. Ties x 2*
11. Ties*
12. U Bolt x 2*
13. Handwheel x 2*
3
4
DTP-000-011-A
4. Washer x 4
*Items 9 - 13 Not Illustrated
Assembling
Step 1 Lower Handlebar
2
2
Fit the lower handle first, and position the white bushes (2) as shown on
both sides. Place the lower handle between bushes with the kick stop
assembley on the right hand side. Attach the lower handle using the fix-
ings supplied.
3
4
1
4
DTP-000-003-A
Step 2 Upper Handlebar
Assemble the upper handle align holes and fit U-bolts and hand/wheel.
13
12
DTP-000-002-A
Step 3 Throttle Assembly
5
5
Attach throttle assembly to the outside of the handlebar as shown and
secure the cable using ties supplied.
4
4
7
8
DTP-000-001-A
1.12
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE STARTING THE MOWER
Prevent Engine Damage
To prevent engine damage the engine is shipped without oil or
petrol. The engine must be filled with the correct grade of oil and
petrol before starting.
Oil Type
Always use high quality detergent oil classified SAE 10W-30. Never
use additives with recommended oil.
To prolong the life of your engine it is important that the oil is changed
after the first 5 hours of use - refer to ‘Maintenance Schedule’.
Check Oil Level
0.15
Litres
Clean around the oil filler cap before removing. With the mower on a
level surface, unscrew and remove the oil filler - dipstick. Wipe oil
from it with a clean cloth. Screw the oil filler - dipstick back in place,
then unscrew and remove it to check the oil level.
The oil level is correct when it is at the full mark on the dipstick.
DO NOT OVERFILL.
Fuel Type
Always use clean, fresh unleaded petrol. Purchase fuel in quantities
that can be used within 30 days. Never mix oil with petrol.
Fill to base of neck to allow for fuel expansion. Do not overfill the
fuel tank.
1.13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MOWER
Controls
Check that the engine stop lever moves freely and returns to it’s rest
position when released.
Starting - Step 1
Place the throttle control to the start position, ensure that the fuel tap
is in the ‘On’ position and the tank vent is open (if fitted).
P-000-004-A
Step 2
Release the handlebar from it’s parked position. Hold the handlebar
together with the engine stop lever, place your foot on the deck and tilt
the mower towards you. This will take the load off the engine making
it easier to start.
The engine stop lever must be held firmly against the handlebar to
start and keep the engine running. If the engine stop lever is
released the engine will stop.
DTP-
Step 3
Allow the engine to warm up and move the throttle lever to the
‘run’ position after starting a cold engine.
To prevent damage never pull the engine start grip when the
engine is running.
HAY-G00005-A
1.14
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MOWER
Cutting Grass
Start at the outside border of the lawn and go round working towards
the centre. Always control the mower with both hands, keeping the
mower flat on the ground.
Stopping
Release the engine stop lever.
Emergency stop: Release the engine stop lever.
If the engine fails to stop, disconnect the spark plug lead.
STOP
CS146
1.15
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MOWER
Flexiblade 446
Adjusting the Cutting Height
High
Low
The cutting height of your mower has been set at the highest position (1).
If you prefer a lower cut follow these instructions:
1
2
a. Turn the petrol tap to the off position and where fitted the vent screw.
b. Disconnect the spark plug lead.
c. Tilt the mower to its side. (Keeping the carburettor uppermost.)
30513
d. Remove the retaining bolt with the spanner provided whilst holding the
blade or disc. Make sure your hands are adequately protected from the
cutting edge.
e. Reposition the spacers as required. See diagrams for cutting device
option.
Cutterbar 450 / 453
Note for the 446 Hovertrim: One spacer is required above the disc at
all times.
1
High
2
3
NOTE: The large spacer must be positioned directly below the impeller at
all times.
TIGHTEN THE BLADE RETAINING BOLT - USE ONLY THE SPAN-
NER PROVIDED.
4
Low
HAY-
305113
Before Mowing
To prevent accidents, thoroughly inspect the area and remove all
objects which when contacted by the mower cutterbar could become
dangerous projectiles. Inspect the area for hidden obstructions which
when contacted by the cutterbar could risk health and safety or result
in damage to the mower. Remember the location of these obstructions
and ensure that you mow around them.
1.16
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
MOWER
To prevent accidents stop the engine disconnect the spark plug
lead before attempting to carry out maintenance procedures
on the mower.
Engine
7
1
8
6
1. Finger Guard
2. Carburettor
3. Spark Plug / Lead
4. Exhaust Guard
5. Exhaust
4
5
6. Oil filler Cap/ Dipstick
7. Start Grip
8. Fuel Cap
3
2
9. Air cleaner.
9
1C423
Carburettor Adjustments
Should only be made by an authorised Honda dealer. Under no
circumstances should the engine be adjusted to run at a speed in
excess of that shown on the Declaration of Conformity.
Air Cleaner Service
3
2
1
To service the air cleaner remove the air cleaner cover (1) by
releasing two top catches (2) and tilting away from body until
lower tabs release. Remove cartridge (3) and clean by tapping gen-
tly on a flat surface. If very dirty or damaged replace.
- Do not brush
- Do not use petroleum solvents.
- Do not oil the cartridge.
After servicing, install the cartridge in the cover. Insert the tabs
on the bottom of the cover into the slots in the bottom of the
base.Tilt the cover upwards until the two catches (2) hold it in
place.
1.17
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
MOWER
Spark Plug Service
Use only an approved spark tester (1) to check for a spark as shown in
the diagram.
Replace the spark plug every 100 hours or every season, whichever
occurs first. A spark plug wrench is available from any authorised
Honda service dealer.
1
Check the spark plug gap with a feeler gauge and set at 0.7 - 0.8mm.
Keeping Engine Clean
Remove all grass and debris from the engine including the
exhaust/exhaust guard, the air ways in the top cowl and the surround-
ing deck areas on a daily basis after use. Never spray the engine with
water during cleaning. Water can contaminate the fuel. Always clean
with a brush or compressed air.
Grass and debris may clog the engine’s air cooling system especially
after prolonged operation while cutting tall, dry grass. The internal cool-
ing fins and surfaces may require cleaning to prevent overheating and
engine damage. We recommend that this service be carried out by an
authorised dealer.
1.18
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Deck Housing
MOWER
Remove grass debris from the top and underside of the deck immedi-
ately after use.
Securing Nuts & Bolts
Regularly check that all securing nuts and bolts are tight. Replace
missing or damaged items immediately.
1CG480V36B
Oil Service
Check the oil level daily before starting the engine and ensure that the
correct oil level is maintained. Refer to-‘Before Starting the Mower’
for oil checking and filling instructions.
Change the engine oil after the first 5 hours of operation and thereafter
according to the ‘Maintenance Schedule’:-
1. Drain fuel by running the engine until the fuel tank is empty.
2. Remove the spark plug lead.
3. Allow the engine to cool.
4. Drain the oil while the engine is warm.(Not hot)
5. Tip the machine over on to its side ensuring that the air clean-
er is uppermost.
6. Remove the oil filler dipstick and drain the oil into a suitable
container.
7. Refill with new oil of the recommended SAE viscosity grade.
(Refer to-‘Before Starting the Mower’)
1.19
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
MOWER
Cutterbar Removal
Drain the fuel by running the engine until the fuel tank is empty and the
engine stops. Remove the spark plug lead and allow the engine to
cool. Turn the mower on its left hand side and ensure that the carburet-
tor is uppermost.
Firmly grip the end of the cutterbar with the gloved hand and remove
the bolt with the supplied spanner.
To prevent accidents never work on the cutterbar unless the spark
plug lead has been removed. The cutterbar has sharp edges.
ALWAYS wear strong gloves to protect your hands when working
on the cutterbar. DO NOT rotate tools towards the cutting edges to
avoid the risk of injury should the tool slip. ALWAYS use genuine
replacement parts.
The condition of the cutterbar and its mounting arrangement should be
checked regularly for signs of wear or damage. Ensure that the cutter-
bar is not bent or cracked.
A damaged cutterbar that is out of balance will vibrate excessively and
may break. DO NOT use an unbalanced cutterbar.
Regularly check that the bolt securing the cutterbar is tightened.
Replace the cutterbar every 2 years of sooner if excessively worn or
damaged.
Flexiblade Replacement
Drain the fuel by running the engine until the fuel tank is empty and the
engine stops. Remove the spark plug lead and allow the engine to
cool. Turn the mower on its left hand side and ensure that the carburet-
tor is uppermost. Wearing protective gloves remove flexiblade and
replace with new.
1.20
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Storage
MOWER
Engines stored in excess of 30 days need to be protected with a fuel addi-
tive or drained of fuel to prevent gum from forming in the fuel system
or on essential carburettor parts. To ensure your mower is maintained in
good working order it is important that the following procedure is adopt-
ed. Refer to the engine handbook as necessary.
Drain fuel from the engine by operating the engine until it stops.
Disconnect the spark plug lead.
Change the engine oil.
Remove the engine spark plug and pour 15ml of engine oil into the
engine cylinder and replace the spark plug. Do not exceed the stated
volume of oil as engine damage may occur on re-starting. Do not
replace the spark plug lead. Slowly pull the engine start - grip once
to crank the engine. This will distribute the oil and help prevent engine
corrosion.
Clean grass and debris from the engine cylinder, cylinder head cooling
fins, under top cowl, and around and behind exhaust/exhaust guard.
Lubricate the mower.
Treat metal parts with a water repellent anti-corrosion product.
Cover the mower with a protective sheet and store it in a dry, ventilat-
ed area.
1.21
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE
SHOOTING
PROBLEM
POSSIBLE FAULT
Engine stop lever released.
Incorrect oil level.
REMEDY
Engine will not turn over
Operate engine stop lever.
Check oil level.
Obstruction under deck.
Remove obstruction.
Engine smokes
Excess oil level.
Check oil level.
Air cleaner cartridge oil
soaked or blocked.
Service air cleaner.
Engine runs then stops
Engine will not start
Fuel starvation.
Fill fuel tank.
Fuel cap vent blocked.
Fuel tap closed.
Clean fuel cap vent.
Open fuel tap (if fitted).
Raise height of cut.
Fill fuel tank.
Engine under load.
Fuel starvation.
Engine cold.
Set throttle to ‘choke’ position.
Incorrect/contaminated fuel.
Drain fuel tank and fill with
correct fuel.
Spark plug lead disconnected.
Throttle setting incorrect.
Faulty spark plug.
Connect spark plug lead.
Set throttle to ‘start’ position.
Clean and adjust gap or replace.
Engine runs rough
Spark plug lead becoming
disconnected in use.
Connect spark plug lead.
Faulty spark plug.
Clean and adjust gap or replace.
Service air cleaner.
Air cleaner blocked.
Incorrect/contaminated fuel.
Drain tank and fill with correct fuel.
1.22
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
PROBLEM
POSSIBLE FAULT
Mounting bolts loose.
Cutterbar bolt loose.
REMEDY
Tighten bolts
Tighten bolt
Engine vibrates excessively
Cutterbar out of balance.
Bent crankshaft.
Balance cutterbar
Consult your dealer
Damaged impeller or blade
Consult your dealer
Balance the cutterbar
Uneven cut
Cutterbar out of balance
Engine running slow
Impeller air vents blocked
Underdeck not clean
Blade loose
Consult your dealer
Check and unblock
Clean
Poor hovering
Tighten blade
1.23
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINFRAME
LIST
PARTS
446 450 453
Item No. Description
Part No.
Qty Qty
Qty Item Note
1
2
3
4
5
6
7
8
Upper Handle
H290237
1
1
2
1
1
1
2
2
1
1
2
1
1
2
1
1
0
1
1
1
1
1
1
1
0
1
1
1
0
1
1
2
1
1
1
2
2
1
1
2
1
1
2
1
0
1
1
1
1
1
1
1
0
1
1
1
1
0
1
1
2
1
1
1
2
2
1
1
2
1
1
2
1
0
1
1
1
1
1
1
1
0
0
1
1
1
1
Operator Presence Control
Grip - Handle Upper
Kit Cable Securing
Throttle/Brake Control
Lower Handle
M6 U Bolt BZP
Handwheel M6
H290239
H292276
H190139
H292315
H290288
H292026
H192204
H290286
H290265
H290097
H290267
H290003
H292279
H292269
H290270
H290271
H290004
H292329
H290011
H192268
H190210
H295089
H295125
H295126
H295128
H295129
H295159
H295160
9
Footstop
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Kit Footstop Securing
Handlebar/Deck Fix Kit
Kit Engine Securing
Kit Engine Mount frame
Screw
Upstop Bracket
Deck 446
Deck 450/453
Kit Engine Bolts
Key Woodruff D16 X 4
Drive Hub
Impeller Mk II
Spanner Petrol
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
Not Shown
Decal-Warning
Decal 446 Hovertrim Logo
Decal 450 Professional Logo
Logo Allen
Decal A' Logo
Decal Stop
Decal 453 Hover Prof
1.24
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINFRAME
PARTS LIST
1
2
3
12
12
13
4
14
12
12
4
15
5
16
17
6
7
10
9
7
8
18
10
19
20
11
11
21
11
*
HAY-G00001-A
1.25
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS
BLADE OPTIONS
LIST
446
Qty
450
Qty
453
Qty
Item No. Description
Part No.
Item Note
1
2
Spacer
Spacer Disc
H192270
H192025
H192272
H292018
H292401
H292384
H292385
H292351
H192299
1
2
1
1
1
1
1
0
0
1
3
1
1
0
0
0
1
0
1
3
1
1
0
0
0
0
1
3
4
5
6
7
8
9
Blade Ret.Spigot Steel
Blade/Head Bolt
Safeway Disc
Flexiblade 143mtr
Flexiblade 27mtr
Blade 20"
Blade 21"
KIT OPTIONS
Kit - Swinging Blade
446
Qty
450
Qty
453
Item No. Description
Part No.
Qty Item Note
1
2
3
3
4
5
6
7
8
Spacer
Spacer Disc
Bottom Plate
Bottom Plate
Swinging Blade (Pack 3)
Swinging Blade (Pack 60)
Blade Retaining Kit (Pack 3) H290276
Blade Ret.Spigot Steel
Blade/Head Bolt
H192270
H192025
H292340
H292341
H292318
H292318-60
1
3
1
0
1
1
1
1
1
1
3
0
1
1
1
1
1
1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
H192272
H292018
1.26
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
BLADE OPTIONS
Code 446
Code 450/453
*
*
1
1
2
2
5
6
7
8
9
2
3
2
3
4
4
HAY-G00002-A
KIT OPTIONS
Kit - Swinging Blade
Code 446/450
*
1
2
3
4
4
5
2
6
6
7
8
HAY-G00009-A
1.27
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST
KIT OPTIONS
PARTS
Kit - Undercarriage (Transport Wheel)
446
Qty
450
Qty
453
Item No. Description
Part No.
Qty Item Note
1
2
3
4
5
6
7
8
Undercarriage
Kit Axle Securing Bolts
Wheel
Kit Axle Spacers
Axle
Spacer Under Carriage
Hook Petrol Hover
Handlebar/Deck Fix Kit
H192284
H190235
H292033
H290032
H192286
H192281
H192282
H290097
1
1
2
1
1
2
2
2
1
1
2
1
1
2
2
2
1
1
2
1
1
2
2
2
Kit - Extension Handles
446
450
453
Item No. Description
Part No.
Qty
Qty
Qty Item Note
1
2
3
Throttle Control & OPC
Handwheel
Handlebar Extension
H292387
H192204
H292392
1
2
1
1
2
1
1
2
1
Not Shown
Not Shown
Not Shown
1.28
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
KIT OPTIONS
3
4
2
1
4
2
2
8
7
5
2
3
6
8
8
7
2
4
8
6
4
HAY-G00004-A
1.29
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
1.30
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMER INFORMATION
Serial No:
Engine Type:- GCV135
Engine Type:- GCV160
Engine:- Honda
Engine:- Honda
Date of Sale:-
Your Local Dealer:-
Notes:-
1.31
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR HAYTER DEALER IS:
Hayter Limited
Spellbrook, Bishop’s Stortford, Herts, CM23 4BU, England.
Tel: +44 (0) 1279 723444 Fax: +44 (0) 1279 600338
e-mail: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
|