Gravely Lawn Mower 992066 992067 992068 992069 992070 992071 992072 User Guide

Promaster 252z / 260Z / 272Z  
Owner/Operator Manual  
Models  
992066 - 25hp 52”  
992067 - 25hp 60”  
992068 - 27hp 60”  
992069 - 28hp 60”  
992070 - 25hp 72”  
992071 - 27hp 52”  
992072 - 27hp 72”  
US Patent 6,301,864  
ENGLISH  
FRANÇAIS  
ESPAÑOL  
00264600 1/04  
Printed in USA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Controls and Features . . . . . . . . . . . . . . . . . . . . . 2  
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . 25  
Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Maintenance Schedule . . . . . . . . . . . . . . . . . . . . 14  
Service and Adjustments . . . . . . . . . . . . . . . . . . 17  
INTRODUCTION  
THE MANUAL  
PRODUCT REGISTRATION  
Before operation of unit, carefully and completely read  
your manuals. The contents will provide you with an  
understanding of safety instructions and controls during  
normal operation and maintenance.  
The Gravely dealer must register the product at the time  
of purchase. Registering the product will help the  
company process warranty claims or contact you with the  
latest service information. All claims meeting  
requirements during the limited warranty period will be  
honored, whether or not the product registration card is  
returned. Keep a proof of purchase if you do not register  
your unit.  
All reference to left, right, front, or rear are given from  
operator sitting in the operation position and facing the  
direction of forward travel.  
SERVICE AND REPLACEMENT PARTS  
Customer Note: If Dealer does not register your product,  
please fill out, sign and return the product registration  
card to Gravely.  
When ordering publications,  
Transfer  
replacement parts, or making service  
model &  
inquiries, know the Model and Serial  
serial  
UNAUTHORIZED REPLACEMENT PARTS  
numbers of your unit and engine.  
number  
Use only Gravely replacement parts. The replacement of  
any part on this equipment with anything other than a  
Gravely authorized replacement part may adversely  
affect the performance, durability, and safety of this unit  
and may void the warranty. Gravely disclaims liability for  
any claims or damages, whether regarding warranty,  
property damage, personal injury or death arising out of  
the use of unauthorized replacement parts.  
Numbers are located on the product  
registration form in the unit literature  
package. They are printed on a serial  
number label, located on the frame of  
your unit (Figure 2).  
label from  
product  
registration  
here.  
Serial Number Label  
NOTE: To locate your nearest Gravely Dealer, call  
net.  
DISCLAIMER  
Gravely reserves the right to discontinue, change, and  
improve its products at any time without public notice or  
obligation to the purchaser. The descriptions and  
specifications contained in this manual were in effect at  
printing. Equipment described within this manual may be  
optional. Some illustrations may not be applicable to your  
unit.  
OF3510  
Figure 2  
• Record Unit Model and Serial numbers here.  
DEALER DELIVERY  
Dealer should:  
• Record Engine Model and Serial numbers here.  
1. Test brakes after tractor is assembled to be sure  
adjustment has not been disturbed in shipment  
Wheel brakes are properly adjusted at factory.  
Copyright 2002 Ariens Company  
GB - 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Check the safety interlock system to make sure that  
it is functioning properly. With operator on seat, unit  
must not start unless steering levers are in neutral  
(N) and Power Takeoff (PTO) is disengaged (Off).  
Engine must stop if operator leaves seat when  
steering levers are in any drive position or PTO is  
Instruct customer on controls and operation of unit.  
Discuss and emphasize the Safety Precautions.  
Give customer Owner/Operator, Parts, and Engine  
Manuals. Advise customer to thoroughly read and  
understand them.  
Customer Note: Your Dealer has been provided  
complete set-up and preparation instructions which must  
be completed prior to you taking delivery of this unit. The  
dealer is required to review important information in this  
manual with you before or upon delivery of the unit or  
attachment.  
3. Fill out Original Purchaser Registration Card and  
return the card to Gravely.  
4. Explain Gravely Limited Warranty Policy.  
5. Explain recommended lubrication and  
maintenance. Advise customer on adjustments.  
SAFETY  
WARNING: This cutting machine is capable of  
amputating hands and feet and throwing  
objects. Failure to observe the safety  
instructions in the manuals and on decals could  
result in serious injury or death.  
WARNING: POTENTIALLY HAZARDOUS  
SITUATION! If not avoided, COULD RESULT in  
death or serious injury.  
CAUTION: POTENTIALLY HAZARDOUS  
SITUATION! If not avoided, MAY RESULT in  
minor or moderate injury. It may also be used to  
alert against unsafe practices.  
Slopes are a major factor related to  
loss-of-control and tip-over accidents. Operation  
on all slopes requires extra caution.  
Tragic accidents can occur if the operator is not  
alert to the presence of children. Never assume  
that children will remain where you last saw  
them.  
NOTATIONS  
NOTE: General reference information for proper opera-  
tion and maintenance practices.  
Gasoline is extremely flammable and the vapors  
are explosive, handle with care.  
IMPORTANT: Specific procedures or information  
required to prevent damage to unit or attachment.  
Disengage attachment, stop unit and engine,  
remove key, engage parking brake, and allow  
moving parts to stop before leaving operator’s  
position.  
PRACTICES AND LAWS  
Practice usual and customary safe working precautions,  
for the benefit of yourself and others. Understand and  
follow all safety messages. Be alert to unsafe conditions  
and the possibility of minor, moderate, or serious injury or  
death. Learn applicable rules and laws in your area,  
including those that may restrict the age of the operator.  
SAFETY ALERT SYMBOL  
These are safety alert symbols. They  
mean:  
ATTENTION!  
REQUIRED OPERATOR TRAINING  
OL1253  
YOUR SAFETY IS INVOLVED!  
Original purchaser of this unit was instructed by the seller  
on safe and proper operation. If unit is to be used by  
someone other than original purchaser (loaned, rented or  
sold), ALWAYS provide this manual and any needed  
safety training before operation.  
When you see this symbol:  
BECOME ALERT!  
•OBEY THE MESSAGE!  
OL3900  
SIGNAL WORDS  
The safety alert symbols above and signal words below  
are used on decals and in this manual.  
Read and understand all safety messages.  
DANGER: IMMINENTLY HAZARDOUS  
SITUATION! If not avoided, WILL RESULT in  
death or serious injury.  
GB - 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SAFETY DECALS AND LOCATIONS  
ALWAYS replace missing or damaged Safety Decals.  
Refer to Figure 3 for Safety Decal locations.  
7
DANGER / PELIGRO  
• Avoid injury - Stay clear of rotating parts.  
• Risque de blessures - ne pas s’approcher des pièces en  
mouvement.  
• Evitar lesiones - Mantenerse alejado de las piezas giratorias.  
3
6
DANGER/PELIGRO  
077560  
5
07731400D  
4
WARNING/AVERTISSEMENT/ADVERTENCIA  
Ne jamais utiliser  
la tondeuse sans  
protecteur sur le  
canal d'ejection ou operacion  
sans le bac monte. recogedor este fijo.  
No operar segadora  
menos que las defensas  
esten en posicion de  
a
Do not operate mower  
unless guards are in  
operating position or  
bagger is attached.  
4
o
el  
07742300B  
1
DANGER / PELIGRO  
2
17  
MAX  
TO AVOID SERIOUS INJURY OR DEATH  
Read the operator's manual.  
POUR EVITER LES BLESSURES GRAVES OU LA MORT  
Lire le manuel d'utilisation.  
PARA EVITAR DAÑOS SERIOS  
O
LA MUERTE  
3
Leer el manual del operador.  
Éloigner les engants et tout autre personne pendant le fonctionnement de la  
machine.  
Ne jamais décharger directement en direction de quelqu’un. Des particules  
projetées peuvent provoquer des blessures.  
Regardez derriere et sur les cotes lorsque vous reculez.  
Ne transportez jamais dénfant.  
Tondez toujours de haut en bas et inversement jamais le long des pentes.  
Si la machine sárrete en montee. Debrayez la lame et redescendez  
doucement.  
Evitez les virages brusques.  
Maintenez toujours en place tous les elements de securite (protecteurs,  
interrupteurs, etc.).  
Controlez le bon fonctionnement des interrupteurs de securité avant  
utilisation tel q'uindiqué dans le manuel d'utilisation.  
Comprenez bien la fonction et la situation de chacun des leviers et boutons  
de commande.  
Mantenga la unidad alejada de los niños  
cuando esté en funcionamiento.  
u
otras personas  
Keep children and others away from unit while  
operating.  
Never direct discharge toward other people.  
Thrown objects can cause injury.  
Look down and behind before and while backing.  
Never carry children.  
Go up and down slopes, not across.  
If machine stops going uphill, stop blade and  
back down slowly.  
Avoid sudden turns.  
Keep safety devices (guards, shields, switches,  
etc.) in place and working.  
Check interlock system per manual before use.  
Understand location and function of all controls.  
Never allow operation by untrained persons.  
DANGER/PELIGRO  
Nunca dirija la descarga hacia otras personas, ya que los  
objetos lanzados pueden provocar lesiones.  
Antes  
Nunca monten niños.  
Suba baje pendientes, no transversalmente.  
Si la maquina se detiene subiendo cuesta, desactive la  
y
durante retroceso mirar hacia abajo  
y
detras.  
y
cuchilla  
y
baje lentamente.  
Evite viradas subitas.  
Mantenga artefactos de seguridad (defensas, protectores,  
interruptores, etc.) en su lugar trabajando.  
Verifique en el manual el sistema de engranar antes de usar.  
localizaciones de todos  
y
Tenga conocimiento de funciones  
los controles.  
y
05359400  
Never allow operation by untrained persons.  
Never allow operation by untrained persons.  
07734700D  
07731400D  
OF3390  
Figure 3  
Keep children out of work area and under  
watchful care of a responsible adult.  
1. DANGER! TO AVOID SERIOUS INJURY  
OR DEATH  
Read Owner/Operator Manual.  
OL4470  
NEVER CARRY CHILDREN.  
OL1801  
Keep children and others away from unit  
while operating.  
OL4480  
Go up and down slopes, not across.  
DO NOT operate on slopes over 17°.  
OL4370  
MAX  
17°  
Never direct discharge toward other people.  
Thrown objects can cause injury. Remove  
objects that could be thrown by the blade.  
OL4450  
• If machine stops going uphill, stop blade and back  
down slowly.  
OL0910  
• Avoid sudden turns.  
Look down and behind before and while  
backing.  
• Keep safety devices (guards, shields, switches, etc.)  
in place and working.  
• Check interlock system per manual before use.  
• Understand location and function of all controls.  
• Never allow operation by untrained persons.  
OL4460  
GB - 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. PINCH POINT  
7. DANGER!  
Avoid pinch points.  
AVOID INJURY. Stay clear of rotating parts.  
OL4730  
OF3330  
SAFETY RULES  
3. DANGER! ROTATING PARTS  
Read, understand, and follow all safety practices in  
Owner/Operator Manual before beginning assembly.  
Failure to follow instructions could result in personal  
injury and/or damage to unit.  
Always keep feet and hands away from  
rotating parts.  
ALWAYS remove key and/or wire from spark plug before  
assembly. Unintentional engine start up can cause death  
or serious injury.  
OL3030  
Always stand clear of discharge area. Do not  
direct discharge toward other people.  
Complete a walk around inspection of unit and work area  
to understand:  
OL0910  
• Work area • Your unit • All safety decals  
Keep people away from unit while operating.  
ALWAYS check overhead and side clearances carefully  
before operation. ALWAYS be aware of traffic when  
operating along streets or curbs.  
Keep children and people away.  
OL3292  
Keep children out of work area and under watchful care  
of a responsible adult.  
Shut off engine, remove key, read manual  
before you adjust or repair unit.  
Keep area of operation clear of all toys, pets, and debris.  
Thrown objects can cause injury.  
OL4010  
Check for weak spots on docks, ramps or floors. Avoid  
uneven work areas and rough terrain. Stay alert for  
hidden hazards or traffic.  
NO STEP! Always keep feet away from  
rotating parts.  
DO NOT operate near drop offs, ditches, or  
embankments. Unit can suddenly turn over if a wheel is  
over the edge of a cliff or ditch, or if an edge caves in.  
OL4420  
4. WARNING!  
Data indicates that operators, age 60 and above, are  
involved in a larger percentage of riding mower related  
injuries. These operators should evaluate their ability to  
operate the riding mower safely enough to protect  
themselves and others from serious injury.  
Always stand clear of discharge area.  
OL4430  
Read the entire Owner/Operator manual and other  
training material. If the operator or the mechanic cannot  
read the manual, it is the owner’s responsibility to explain  
it to them. Only the user can prevent and is responsible  
for accidents or injuries occurring to themselves, other  
people or property.  
Do not operate mower unless bagger is  
attached or guards are in operating position.  
OL3320  
5. HOT SURFACES!  
Only trained adults may operate or service unit.  
Local regulations may restrict the age of the operator.  
Training includes actual operation.  
DO NOT touch parts which are hot from  
operation. ALWAYS allow parts to cool.  
NEVER allow children to operate or play on or near unit.  
Be alert and shut off unit if children enter area.  
OS0731  
NEVER operate unit after or during the use of  
medication, drugs or alcohol. Safe operation requires  
your complete and unimpaired attention at all times.  
6. ROTATING PARTS  
AVOID INJURY. Stay clear of rotating parts.  
DO NOT wear loose clothing or jewelry and tie back hair  
that may get caught in rotating parts.  
OF3450  
Wear adequate outer garments.  
GB - 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NEVER wear open sandals or canvas shoes during  
operation. Wear adequate safety gear, protective gloves  
and footwear.  
DO NOT try to stabilize the machine by putting your foot  
on the ground.  
Never direct discharge towards persons or property that  
may be injured or damaged by thrown objects. Use  
extreme caution on gravel surfaces.  
Wear proper footwear to improve footing on slippery  
surfaces.  
Always wear safety goggles or safety glasses with side  
shields when operating mower.  
Always stand clear of the discharge area.  
ALWAYS disengage PTO, stop unit and engine, remove  
key, engage parking brake and allow moving parts to  
stop before leaving operator’s position.  
Moving parts can cut or amputate fingers or a hand.  
Wrap blade(s) or wear gloves to service. On multiblade  
mowers, rotation of one blade will cause all blades to  
rotate.  
Never engage PTO while raising attachment or when  
attachment is in raised position.  
NEVER place your hands or any part of your body or  
clothing inside or near any moving part while unit is  
running.  
DO NOT operate at too fast a rate. DO NOT change  
engine governor settings or over-speed engine. Slow  
down before turning.  
ALWAYS keep hands and feet away from all rotating  
parts during operation. Rotating parts can cut off body  
parts.  
DO NOT operate in reverse unless absolutely necessary.  
ALWAYS look down and behind before and while  
backing.  
ALWAYS keep body and hands away from pin holes or  
nozzles which eject hydraulic fluid under pressure.  
If equipment vibrates abnormally, stop engine at once,  
wait for moving parts to stop and remove wire from spark  
plug. Repair any damage before restarting unit.  
DO NOT touch parts which are hot. Allow parts to cool.  
ALWAYS keep hands and feet away from all pinch  
points.  
Take all possible precautions when leaving unit  
unattended. Shut off engine. Remove wire from spark  
plug and secure it away from spark plug.  
Fumes from the engine exhaust can cause death or  
serious injury. DO NOT run engine in an enclosed area.  
Always provide good ventilation.  
ALWAYS remove key to prevent unauthorized use.  
Know the weight of loads. Limit loads to those you can  
safely control and the unit can safely handle.  
Read, understand, and follow all instructions in the  
manual and on the machine before starting.  
Disengage PTO when attachment is not in use. ALWAYS  
turn off power to attachment when travelling, crossing  
driveways, etc.  
Understand:  
• How to operate all controls  
• The functions of all controls  
• How to STOP in an Emergency  
• Braking and steering characteristics  
• Turning radius and clearances  
Mow up and down slopes, not across them.  
DO NOT operate on slopes of more than 17 degrees.  
Use of a Rollover Protection System (ROPS) is  
recommended for slope operation. See Accessories on  
Keep safety devices or guards in place and functioning  
properly. NEVER modify or remove safety devices.  
Always wear a seat belt when operating unit using a  
Rollover Protection System (ROPS).  
Ensure Safety Interlock System is functioning properly.  
DO NOT operate unit if safety interlock is damaged or  
disabled.  
Keep all movements on the slope slow and gradual. Do  
not make sudden changes in speed or direction.  
Avoid starting or stopping on the slope. If tires lose  
traction, disengage the blades and proceed slowly  
straight down the slope.  
Start and operate unit only when seated in operator’s  
position. Steering control levers must be in neutral, PTO  
disengaged and parking brake set when starting engine.  
If you cannot back up a slope or you feel uneasy on it, do  
not mow it.  
Use care when approaching blind corners, shrubs, trees  
or other objects that may obscure vision.  
DO NOT park on slopes unless necessary. When parking  
on slope always chock or block wheels. Always engage  
parking brake.  
Dust, smoke, fog, etc. can reduce vision and cause an  
accident. Mow only in daylight or good artificial light.  
Avoid slippery surfaces. Always be sure of your footing.  
Use a slow speed. Tires may lose traction on slopes  
even though the brakes are functioning properly.  
DO NOT mow on wet grass. Reduced traction could  
cause sliding and effect the machine’s stability.  
Do not bypass transmission when on a slope.  
Watch for traffic when operating near or crossing  
roadways.  
Use extra care when loading or unloading unit onto trailer  
or truck.  
Never carry passengers.  
GB - 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Secure unit chassis to transport vehicle. NEVER secure  
from rods or linkages that could be damaged.  
Keep nuts and bolts tight, especially blade attachment  
bolts, and keep equipment in good condition.  
DO NOT transport machine while engine is running.  
ALWAYS turn off power to attachment when transporting.  
Keep unit free of debris. Clean up oil or fuel spills.  
NEVER attempt to make any adjustments to unit while  
engine is running (except where specifically  
recommended). Stop engine, remove key or spark plug  
wire and wait for all moving parts to stop before servicing  
or cleaning.  
This product is equipped with an internal combustion  
type engine. DO NOT use unit on or near any  
unimproved, forest-covered or brush covered land unless  
exhaust system is equipped with a spark arrester  
meeting applicable local, state or federal laws. A spark  
arrester, if it is used, must be maintained in effective  
working order by operator.  
Check parking brake operation frequently. Adjust and  
service as required.  
ALWAYS maintain unit in safe operating condition.  
Damaged or worn out muffler can cause fire or explosion.  
NO smoking, NO sparks, NO flames. ALWAYS allow  
engine to cool before servicing.  
Fuel is highly flammable and its vapors are explosive.  
Handle with care. Use an approved fuel container.  
Maintain or replace safety and instructions labels, as  
necessary.  
NO smoking, NO sparks, NO flames. ALWAYS allow  
engine to cool before servicing.  
NEVER store unit with fuel in fuel tank, inside a building  
where any ignition sources are present.  
NEVER fill fuel tank when engine is running or hot from  
operation.  
Shut off fuel and allow engine to cool completely before  
storing in closed area or covering unit.  
NEVER fill or drain fuel tank indoors.  
Clean grass and debris from unit, especially from around  
muffler and engine, to help prevent fires.  
Replace fuel cap securely and clean up spilled fuel.  
Never fill containers inside a vehicle or on a truck or  
trailer bed with a plastic liner. Always place containers on  
the ground away from your vehicle before filling.  
For extended storage, shut off fuel and clean unit  
thoroughly. See engine manual for proper storage.  
Lower cutting deck unless a positive mechanical lock is  
used.  
When practical, remove gas-powered equipment from  
the truck or trailer and refuel it on the ground. If this is not  
possible, then refuel such equipment on a trailer with a  
portable container, rather than from a gasoline dispenser  
nozzle.  
Use only attachments or accessories designed for your  
unit.  
Check attachment components frequently. If worn or  
damaged, replace with manufacturer’s recommended  
parts.  
Keep the nozzle in contact with the rim of the fuel tank or  
container opening at all times until fuelling is complete.  
Do not use a nozzle lock-open device.  
If fuel is spilled on clothing, change clothing immediately.  
Avoid Electric Shock. Objects contacting both battery  
terminals at the same time may result in injury and unit  
damage. DO NOT reverse battery connections.  
Explosive Gases from battery can cause death or serious  
injury. Poisonous battery fluid contains sulfuric acid and  
its contact with skin, eyes or clothing can cause severe  
chemical burns.  
No flames, No sparks, No smoking near battery.  
ALWAYS wear safety glasses and protective gear near  
battery.  
DO NOT TIP battery beyond a 45° angle in any direction.  
ALWAYS keep batteries out of reach of children.  
Battery posts, terminals and related accessories contain  
lead and lead compounds, chemicals known to the State  
of California to cause cancer and reproductive harm.  
Wash hands after handling.  
ALWAYS block wheels and know all jack stands are  
strong and secure and will hold weight of unit during  
maintenance.  
Release pressure slowly from components with stored  
energy.  
GB - 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
6. Battery - Remove battery from unit and charge (See  
WARNING: AVOID INJURY. Read and  
understand entire Safety section before  
proceeding.  
7. Check Engine Crankcase - To access engine, open  
hood. Check and add oil if needed. See Engine  
Manual for specifications.  
UNIT ASSEMBLY  
8. 60" and 72" Decks - Remove, reverse, and reinstall  
discharge chute and mounting bracket.  
Package Contents:  
Unit, Mower Deck and Literature Pack  
WARNING: Discharge chute must pivot freely.  
DO NOT overtighten the pivot bolts.  
Preparation Checklist  
Refer to the Owner/Operator manual as required.  
9. Fill Engine Fuel Tank - Add clean fuel to the fuel  
tank.  
1. Unpack Unit - Remove shrink wrap and packaging  
materials.  
IMPORTANT: Refer to Engine Manual for fuel type.  
2. Remove Unit From Container - Open Bypass  
Valves (dump valves) (See Moving the Unit with the  
10. Hardware - Check for loose hardware.  
11. Check Safety Interlock System - Check to see that  
the interlock system operates correctly (See Safety  
Push unit from container onto a level surface. Close  
the dump valves.  
3. Tires - Adjust tire pressure for front tires: 20-25 PSI  
(138-172 kN/m2), rear tires: 12-15 PSI  
(83-103 kN/m2).  
WARNING: FAILURE OF INTERLOCK  
together with improper operation can result in  
severe personal injury.  
4. Position and Attach Seat - Remove nuts from seat  
studs in hood frame. Lift and rotate seat onto hood  
frame. Secure with nuts.  
12. Lubrication - Lubricate all fittings per maintenance  
label under seat and check hydrostat oil level (See  
5. Position Steering Levers - Remove bolts and  
spacers from steering rod. Flip the steering levers  
into operating position. Reinstall spacers, bolts and  
nuts. Tighten hardware securely. See Figure 4.  
13. Level Deck - Check unit to assure deck level set at  
factory has been maintained (See Leveling the  
14. Check Function of all Controls - Ensure unit runs  
and performs properly.  
WARNING: FAILURE OF CONTROLS could  
result in death or serious injury.  
1. Steering Lever in  
Shipping Position  
2. Spacers and  
Hardware  
3. Steering Lever in  
Operation  
Position  
OF3520  
Figure 4  
GB - 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
OPERATION  
Steering Levers  
WARNING: AVOID INJURY. Read and  
understand entire Safety section before  
proceeding.  
B
D
A
C
CONTROLS AND FEATURES  
See Figure 1 for Controls and Features locations.  
Safety Interlock System  
077348A  
WARNING: Safety interlock system failure and  
improper operation of unit can result in death or  
serious injury. Test this system each time the  
unit is operated. If this system does not function  
as described, do not operate until repairs are  
made.  
The steering levers control speed and direction. In  
addition, they will stop the unit.  
A. For reverse travel, pull both steering control levers  
backward.  
B. For straight forward travel, push both steering control  
levers forward.  
C. To turn left, pull the left back or push the right  
steering control lever forward or a combination of  
both.  
Perform the following tests to ensure the safety interlock  
system is working properly. If the unit does not perform  
as stated, contact your Gravely dealer for repairs.  
D. To turn right, pull the right back or push the left  
steering control lever forward or a combination of  
both.  
NOTE: When the parking brake is engaged, the steering  
levers are locked in neutral.  
Test Steering PTO  
Levers  
Parking  
Brake  
Engine  
To stop, return both steering levers to neutral.  
NOTE: The steering controls are mechanically locked in  
neutral whenever the parking brake is engaged.  
STARTING INTERLOCK  
1
2
3
Neutral  
Neutral  
Neutral  
Off  
On  
Off  
Engaged  
Engaged  
Starts  
NOTE: Aggressive turning can scuff or damage lawns.  
ALWAYS keep both wheels rotating when making sharp  
turns. DO NOT make turns with inside wheel completely  
stopped. To obtain minimum turning radius, slowly  
reverse inside wheel while moving outside wheel slowly  
forward.  
Doesn’t Start  
Disengaged Doesn’t Start  
OPERATING INTERLOCK (ENGINE ON)  
4*  
5*  
Neutral  
Neutral  
On  
Off  
Engaged  
Shuts Off  
Shuts Off  
Disengaged  
* Operator lifts off seat.  
Ignition Switch  
3
Operate the ignition switch with the  
removable key. The switch has three  
positions: Off (1), On (2) and Start (3).  
To start the engine, turn the key to  
Start, then release to On. To stop the  
engine, turn the key to Off.  
Parking Brake Interlock System  
With the parking brake engaged, the steering levers must  
be locked in neutral.  
2
1
With the parking brake disengaged, the engine must not  
start and the engine must shut off if the operator leaves  
the seat.  
OF1751  
Eye-QTM  
Choke Control (Not on EFI models)  
Push the choke lever forward to start a  
cold engine. Pull the choke lever to the  
rear when the engine gets warm.  
Monitors equipment  
performance, operator  
performance, and equipment  
maintenance. See Eye-Q  
Owner’s Manual for how to  
access these features.  
OF1680  
GB - 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Throttle Lever  
Fuel Shut-Off Valve  
1
The throttle lever changes the engine  
speed. Move the throttle lever to Fast (1)  
to increase engine speed. Move the lever  
to Slow (2) to decrease engine speed.  
Use this valve to control fuel flow from  
left or right fuel tank.  
OFF  
LEFT  
TANK  
RIGHT  
TANK  
Open the valve to operate the engine.  
Turn the valve to "Off" when storing or  
transporting the unit.  
OF1881  
NOTE: Fuel shut-off valve on EFI units  
does not have an "Off" position.  
Parking Brake Lever  
1. Pull lever up to engage parking brake.  
2. Push lever down to disengage parking  
brake.  
2
OF1700  
OF1740  
Power Take Off (PTO) Switch  
Power take off (PTO) switch engages and  
disengages the mower blades.  
ON  
Seat Adjustments  
WARNING: Make all seat adjustments with unit  
stationary, parking brake engaged and engine  
shut off.  
Pull the power take off (PTO) switch to  
"On" position to engage mower blades.  
Push the power take off (PTO) switch to  
"Off" position to disengage mower blades.  
OE0261  
To adjust seat forward or backward:  
OFF  
1. While seated, pull seat adjustment lever outward  
and slide seat into desired position.  
NOTE: The engine will not start unless the steering con-  
trol levers are in the neutral position, the PTO switch is in  
the “Off” position and parking brake is engaged.  
2. Release lever and slide seat forward or back to lock  
seat into position.  
Mower Lift Lever  
To adjust seat suspension:  
Use the mower lift lever, located on the left  
side of tractor, to raise and lower the  
mower deck.  
To make seat more firm turn knob clockwise. To  
make seat less firm turn knob counter clockwise.  
Turn knob several turns at a time until desired  
position is achieved.  
Pull the lever rearward to raise or push  
the lever forward to lower the mower  
deck.  
Engine Oil Pressure Indicator  
Indicator lights up “Red” if the oil pressure  
is low. Check oil level and add if  
necessary. Refer to engine manual.  
Release lever to hold the mower deck in  
selected position.  
OG0601  
OF1700  
The cutting height indicator on the right lift  
cylinder shows the approximate cutting  
height in inches.  
Malfunction Indicator Light (EFI models only)  
The malfunction indicator light flashes  
when there is a problem with the  
Cylinder Stops  
electronic fuel injection system. When  
OD0190  
The cylinder stops ensure the same cutting height after  
raising the deck to clear an obstacle. Store the stops on  
the post behind the hydraulic lift cylinder. The stops come  
in two (2) sizes, 1/4" (.64 cm) and 1/2" (1.27 cm).  
indicator light flashes, disengage PTO,  
shut off engine, remove key and see engine manual.  
Axle Locks  
1. Remove the cylinder stops from the post and snap  
onto the lift cylinder rod.  
For a solid front axle, install axle locks on front axle. For a  
pivoting front axle, remove axle locks from front axle and  
store on unit.  
2. Push the lift lever forward until the cylinder rests  
against the cylinder stops.  
Headlights  
Push headlight switch to ON position to turn ON  
headlights. Push headlight switch to OFF position to turn  
OFF headlights.  
GB - 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Make sure the steering levers are in neutral.  
2. Put the PTO switch in the “Off” position.  
3. Engage parking brake.  
FILLING FUEL TANK  
WARNING: AVOID INJURY. Read and  
understand entire Safety section before  
proceeding.  
4. For models with choke:  
If the engine is cold, move the choke control to the  
“On” position. If the engine is warm or hot, do not  
use choke.  
Add fuel to Fuel Tank as needed. See your Engine  
Manual for correct type and grade of fuel.  
5. Move the throttle to 3/4 “Fast” position. See Engine  
Manual for detailed instructions.  
To add fuel to the fuel tank:  
1. Place unit in an open or well-ventilated open area.  
2. Stop the engine.  
6. Put the ignition key in the switch and turn it to the  
“Start” position.  
3. Clean the fuel cap and the area around the fuel cap  
to prevent dirt from entering the fuel tank. Remove  
the cap from the fuel tank.  
7. As soon as the engine starts, release the key.  
8. For models with choke:  
Move the choke control to the “Off” position from  
the “Choke” position. Wait until the engine is  
running smoothly before operation.  
4. Fill the fuel tank to within 1" (25 mm) below bottom  
of filler neck.  
5. Replace fuel cap and tighten.  
6. Clean up any spilled fuel.  
To stop the engine:  
1. Bring the steering levers to neutral. Disengage the  
PTO and engage the parking brake.  
PRE-START  
2. Move the throttle lever to the “Slow” position.  
3. Turn the ignition key to the “Off” position.  
CAUTION: Make sure all hardware is tight, all  
safety devices are in place and all adjustments  
are made correctly.  
TO MOW WITH UNIT  
Operate the unit only when seated in the operator’s  
position.  
1. Check Safety Interlock System  
If this system does not function as described do not  
operate until repairs are made.  
1. Start the engine. Let the engine warm until it is  
running smoothly.  
2. Check Air Cleaner  
Check air filter for dirt. Clean as required. See  
Maintenance Section.  
2. Release parking brake.  
WARNING: Move the steering control levers  
slowly and keep the throttle control lever at slow  
speed until you learn how to operate the unit.  
3. Check Engine Fuel and Crankcase Oil  
Check and add fuel if required. Check that engine  
crankcase oil is full. Refer to Maintenance Section.  
3. Bring the steering levers to neutral.  
4. Slow the engine down to about 3/4 speed.  
5. Turn ON the PTO switch to engage the mower.  
4. Check Tire Pressure  
5. Check Hydraulic Fluid Level  
6. Adjust Seat  
Be sure all controls can be reached safely from  
operator’s position.  
IMPORTANT: Never engage the PTO if the mower is  
plugged with grass or other material. This may cause  
damage to the electric clutch.  
6. Move throttle control to fast.  
7. Move the steering levers forward to obtain a slow  
ground speed.  
STOPPING IN AN EMERGENCY  
The unit can be stopped immediately at any time by  
turning the ignition key to the "Off" position.  
8. To disengage the mower, move the PTO switch to  
the “Off” position.  
STARTING AND SHUT OFF  
9. When you know how to operate the unit, select a  
speed appropriate to your mowing conditions.  
CAUTION: Read entire Owner/Operator  
Manual, Clutch Manual, and Engine Manual  
first.  
PARKING  
To park the unit:  
DO NOT attempt to start engine at this time.  
1. Bring the steering levers to neutral. Turn off PTO.  
2. Move the throttle lever to the “Slow” position.  
3. Engage the parking brake.  
To start the engine:  
GB - 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Lower the attachment.  
5. Turn the ignition key to the “Off” position and  
remove the key.  
Front of unit  
MOVING THE UNIT WITH THE ENGINE OFF  
IMPORTANT: Never tow unit.  
1. Shut OFF engine.  
2. Place seat in the service position. See Service  
1. Left Bypass  
Valve Lever  
2. Right Bypass  
Valve Lever  
3. Turn right and left bypass valve levers counter  
clockwise 1/2 turn (Figure 5).  
WARNING: Do not bypass transmission when  
on a slope.  
Figure 5  
OF3530  
4. Disengage parking brake.  
FOR BEST PERFORMANCE  
Cut grass when it is dry.  
5. Push unit to desired location.  
6. Engage parking brake.  
Keep mower blades sharp.  
7. Turn bypass valve levers clockwise 1/2 turn.  
Keep mower deck properly leveled.  
Adjust anti-scalp rollers to prevent scalping.  
Do not set height of cut too low. For very tall grass, mow  
twice.  
Do not travel too fast.  
Mow with the engine set at full throttle.  
When mulching, only remove 1/3 of grass length per  
cutting.  
Discharge clippings into areas already cut.  
Vary cutting pattern with each mowing.  
Do not allow grass or debris to collect inside of mower  
deck. Clean after each use.  
MAINTENANCE SCHEDULE  
WARNING: AVOID INJURY. Read and  
understand entire Safety section before  
proceeding.  
Proper maintenance can prolong the life of unit. The  
following charts show the recommended service  
schedule. More frequent service may be required due to  
working conditions (heavy loads, high ambient  
temperatures, dusty conditions, or airborne debris).  
See the maintenance instructions in the Engine Manual  
for additional information.  
NOTE: Use Figure 6 for maintenance item locations.  
GB - 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Kohler Engine  
Kawasaki Engine  
1. Hydraulic Fluid  
Cap/Dipstick  
2. Hydraulic Fluid Tank  
3. Oil Fill/Dipstick  
4. Battery  
5. In-Line Fuel Filter  
6. Oil Drain Petcock  
7. Oil Filter  
8. EFI Fuel Filter  
9. Air Filter  
OF3540  
OF3550  
Figure 6  
Period Service  
Task  
Check Safety Interlock  
WARNING: Safety interlock system failure and  
improper operation of unit can result in death or  
serious injury. Test this system each time the unit is  
operated. If this system does not function as  
described, do not operate until repairs are made.  
Check Parking Brake Interlock System  
Check Engine Oil  
Each  
Use  
Check oil level on dipstick (item 3). Add more oil through the  
engine oil fill cap if needed. See engine manual for detailed  
instructions.  
Check Air Filter  
Check the air cleaner element (item 9) before each use. See  
engine manual for detailed instructions.  
Check Hydraulic Fluid  
Check hydraulic oil level mark on cap/dipstick (item 1). Add  
15W50 Synthetic oil as needed. Do not overfill. See Hydraulic  
Check Tires  
See Specifications on page 27 for correct tire pressure.  
Check Mower Blades  
Check mower blades for wear. Sharpen or replace as needed.  
Every25  
Hours  
Clean Air Filter Outer Element (992066, 067,  
070)  
Clean the outer filter element (item 9). Replace as needed. Refer  
to engine manual for detailed instructions.  
Lubricate Unit  
Oil all pivot points and pin connections. Grease lube fittings. See  
Every50  
Hours  
GB - 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
Period Service  
Task  
Clean Battery  
Keep battery (item 4) and its terminals clean. See Clean Battery  
Change Engine Oil  
Drain oil by opening oil drain petcock (item 6) on right side of unit.  
Refer to engine manual for detailed instructions.  
Clean Air Filter Inner Element (992066, 067, 070) Clean the inner filter element (item 9).  
Every  
100  
Check Fasteners  
Check mower blade mounting hardware and all other fasteners.  
Replace missing or damaged fasteners. Tighten all nuts and bolts  
to their correct torque value.  
Hours  
Check Belts  
Replace worn or deteriorated belts. See Replacing Mower Belts  
Change Fuel Filter  
Change Oil Filter  
Change in-line fuel filter (item 5). Refer to engine manual for  
detailed instructions.  
Change oil filter (item 7). Refer to engine manual for detailed  
instructions.  
Every  
200  
Hours  
Replace Air Filter Inner Element (992066, 067,  
070)  
Replace the inner filter element (item 9). Refer to engine manual  
for detailed instructions.  
Replace Air Filter Outer Element (992068, 069,  
071, 072)  
Replace the outer filter element (item 9). Refer to engine manual  
for detailed instructions.  
Every  
250  
Hours  
Change Hydraulic Fluid and Filter  
Drain hydraulic fluid tank (item 2), replace hydraulic oil filter, refill  
Every  
500  
Hours  
Replace Air Filter Inner Element (992068, 069,  
071, 072)  
Replace the inner filter element (item 9). Refer to engine manual  
for detailed instructions.  
Change EFI Fuel Filter (992069 only)  
Replace canister fuel filter (item 8) on frame. Refer to engine  
manual for detailed instructions.  
Every  
1,500  
Hours  
GB - 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERVICE AND ADJUSTMENTS  
Gravely Dealers will provide any service which may be  
required to keep your unit operating at peak efficiency.  
Should engine service be required, it can be obtained  
from a Gravely Dealer or the engine manufacturer’s  
authorized service center.  
WARNING: AVOID INJURY. Read and  
understand entire Safety section before  
proceeding.  
CAUTION: HOT SURFACES may result in  
injury. DO NOT touch engine or drive parts  
which are hot from operation. Allow parts to cool  
before servicing.  
SERVICE POSITIONS  
1. Place unit on a flat level surface. ALWAYS stop  
engine. Ensure unit is secure and will not tip over.  
Strap and clamp onto lift if used.  
OF3560  
1. Daily Service Position  
2. Full Service Position  
3. Steering Levers  
5. Engine  
6. Service Slot  
7. Engine Hood Prop Rod  
8. Engine Hood & Frame  
2. Place steering levers in neutral position and engage  
parking brake.  
4. Parking Brake  
Figure 7  
3. Unhook hood latches.  
4. Firmly grasp engine frame and cover. Lift to desired  
service position (Figure 7).  
HYDRAULIC FLUID  
WARNING: HYDRAULIC FLUID can result in  
severe burns. Fluid in hydraulic system can  
penetrate skin and result in serious injury or  
death.  
CAUTION: WHEN OPENING ENGINE COVER,  
USE CARE TO PROPERLY ENGAGE PROP  
INTO SLOT. Be sure footing is secure to  
accomodate weight shift of hood when rotating  
to full service position.  
Be sure to stop the engine before doing any  
work on hydraulic parts.  
Daily Service Position: Place engine hood prop rod into  
service slot. Assure rod is engaged in slot properly.  
Keep body and hands away from pin holes or  
nozzles which expel hydraulic fluid when under  
pressure. Use paper or cardboard, not hands, to  
search for leaks.  
Full Service Position: Slowly release frame after seat  
contacts foot board. Use care and be sure of your footing.  
Do not step on mower deck.  
Ensure all hydraulic fluid connections are tight  
and all hydraulic hoses and lines are in good  
condition before applying pressure to system.  
5. When service is complete, lower hood and secure  
with latches.  
FOREIGN FLUID INJECTED INTO BODY can  
result in gangrene. Fluid must be surgically  
removed within a few hours by a doctor familiar  
with this form of injury.  
Check Hydraulic Fluid Level  
FULL Mark  
Operating  
Range  
OE0380  
1. Shut OFF engine. Engage parking brake. Remove  
the ignition key.  
GB - 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                       
2. Put seat in service position.  
Discard mower blade if:  
3. Remove any dirt that may be around the  
cap/dipstick on the hydraulic reservoir.  
More than 1/2 in. (1.27 cm) of metal is removed.  
Air lifts become eroded.  
4. Remove cap/dipstick.  
Blade is bent or broken.  
5. Check hydraulic oil level mark on cap/dipstick.  
6. Add 15W50 Synthetic oil as needed. Do not overfill.  
2. Sharpen mower blade by removing an equal  
amount of material from each end of mower blade.  
DO NOT change angle of cutting edge or round the  
corner of the mower blade.  
Change Hydraulic Fluid and Filter  
Change the hydraulic oil filter and hydraulic oil every 500  
hours. Use Mobil 15W50 synthetic oil for best component  
life.  
3. Check mower blade balance.  
Slide mower blade on an unthreaded bolt. A  
balanced blade should remain in a horizontal  
position. If either end of mower blade moves  
downward, sharpen the heavy end until blade is  
balanced.  
1. Clean around dipstick cap and dipstick. Remove  
dipstick.  
2. Place container under oil filter to catch oil.  
3. Remove oil filter.  
4. Install mower blade(s) on unit.  
4. Allow tank to drain.  
5. Tighten the bolts to a torque of 115-120 lbf-ft  
(156-162.6 N•m).  
5. Lubricate rubber gasket on new oil filter with clean  
hydraulic oil.  
DO NOT Sharpen to This Pattern  
6. Spin new oil filter onto filter housing until it makes  
contact. Tighten oil filter another 1/2 turn.  
7. Add new oil to the oil tank. It will take about 4  
quarts. Use Mobil 15W50 synthetic oil for best  
pump and wheel motor life.  
8. Properly dispose of waste oil.  
MOWER BLADES  
Remove  
CAUTION: Use sturdy gloves or padding to  
protect hands when working with mower  
blades.  
DISCARD if More  
Than 1/2 in. (1.27 cm)  
1. Turn the engine off. Remove the ignition key.  
Remove the ignition wire from the spark plugs.  
2. Remove the bolts, lock washer, flat washers, and  
blades from the spindle shafts.  
Replace  
1. Put the blades, flat washers, lock washers, and the  
bolts back on the spindle shafts.  
OT0792  
2. Tighten the bolts to a torque of 115-120 lbf-ft  
(156-162.6 N•m).  
Sharpen to This Pattern  
3. Replace the ignition wire on the spark plugs.  
1. Cutting Edge  
2. Square Corner  
3. Air Lift Erosion  
4. Air Lift  
Sharpen the Mower Blades  
CAUTION: DO NOT sharpen mower blades  
while on unit. An unbalanced mower blade will  
cause excessive vibration and eventual  
damage to unit. Check mower blade balance  
before reinstalling blades.  
Figure 8  
NEVER weld or straighten bent blades.  
1. Remove mower blade from unit.  
GB - 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
3. Coat terminals with dielectric grease or petroleum  
jelly.  
BATTERY  
WARNING: AVOID INJURY. Read and  
4. Replace battery. See Replace Battery on page 19.  
understand entire Safety section before  
proceeding.  
Charging the Battery  
Battery Electrolyte First Aid  
Follow First Aid directions for contact with battery fluid.  
• External Contact: Flush with water.  
WARNING: Battery posts, terminals and related  
accessories contain lead and lead compounds,  
chemicals known to the State of California to  
cause cancer and reproductive harm. Wash  
hands after handling.  
• Eyes: Flush with water for at least 15 minutes and  
get medical attention immediately!  
• Internal Contact: Drink large quantities of water.  
Follow with Milk of Magnesia, beaten egg or  
vegetable oil. Get medical attention immediately!  
Unit comes equipped with a maintenance-free battery  
that requires no regular maintenance except cleaning the  
terminals.  
In case of internal contact, DO NOT induce vomiting!  
IMPORTANT: DO NOT fast charge. Charging at a higher  
rate will damage or destroy battery. ONLY use an  
automatic charger designed for use with your battery.  
Remove Battery  
1. Shut OFF engine. Engage parking brake. Remove  
the ignition key.  
ALWAYS follow information provided on battery by  
battery manufacturer. Contact battery manufacturer for  
extensive instructions to charge battery.  
2. Place seat in the service position (See Service  
Positions on page 17 in Maintenance).  
1. Remove battery from unit. See Remove Battery on  
3. Disconnect cables from battery (negative, then  
positive) (Figure 9).  
2. Place battery on bench or other well-ventilated  
place.  
4. Remove hold down and remove battery.  
Replace Battery  
3. Connect positive (+) lead of charger to positive (+)  
terminal, and negative (–) lead to negative (–)  
terminal.  
1. Replace battery and secure with battery hold down.  
2. Reconnect cables to battery (positive, then  
negative). Position boot over positive terminal.  
4. Charge battery according to charger and battery  
manufacturers’ instructions.  
3. Return seat to operating position.  
5. Replace battery. See Replace Battery on page 19.  
Clean Battery  
Keep battery and its terminals clean. Inspect every 100  
operating hours or monthly for best performance.  
Jump Starting Battery  
IMPORTANT: DO NOT jump start battery on model  
992069. Failure to comply will void the engine warranty  
and can damage the engine.  
The unit used for jump starting should have a 12 volt  
battery with at least 500 cold cranking amperes, and a  
negatively grounded system.  
NOTE: Ensure battery is not frozen. If the fluid is frozen,  
remove battery from unit and allow it to thaw before  
charging.  
1. Connect the positive (+) jumper cable to the  
positive terminal of the discharged battery (Figure  
9).  
2. Connect the other end of the same jumper cable to  
the positive (+) terminal of the booster battery.  
1. Negative terminal  
2. Positive terminal  
3. Battery  
Figure 9  
3. Connect one end of the second jumper cable to the  
negative (–) terminal of the booster battery.  
OF1671  
1. Remove battery from unit. See Remove Battery on  
4. Make the final jumper cable connection to the  
engine block or the furthest ground point away from  
the discharged battery.  
2. Clean terminals and battery cable ends with wire  
brush.  
GB - 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
STEERING CONTROL NEUTRAL  
ADJUSTMENT  
WARNING: Make sure cables are clear of any  
moving engine parts before starting engine.  
If the steering levers do not line up (match) or the unit  
has excessive creeping when the steering levers are in  
neutral, adjust as follows.  
5. Start engine (refer to Operation Section). If engine  
will not start after several tries, unit or battery may  
need service.  
Adjusting the Steering Levers to Line Up  
(Match) (Figure 11)  
6. After engine starts, leave cables connected for one  
to two minutes.  
1. Shut OFF engine. Engage parking brake. Remove  
the ignition key.  
7. Disconnect cables in reverse order.  
8. Operate unit as normal to charge battery.  
2. Place seat in the service position (See Service  
Positions on page 17 in Maintenance).  
LUBRICATE UNIT  
IMPORTANT: Wipe each fitting clean before and after  
lubrication.  
3. Loosen damper locknut on the same side as the  
steering lever to be adjusted.  
4. Loosen brake interlock on the same side as  
steering lever to be adjusted.  
Steering system and Speed Selector components should  
be lubricated every 50 hours of operation or every  
3 months whichever comes first (Figure 10).  
5. Loosen tie rod jam nut and turn tie rod until steering  
levers are aligned.  
Lube fitting locations are:  
– front axle pivot (2)  
6. Tighten jam nut on tie rod, tighten brake interlock  
and tighten damper locknut.  
Apply Stens Mix Hi-Temp Grease or equivalent to the  
lube fittings. Order P/N: 00036700 - ten pack of 14 oz.  
cartridges.  
When using Stens Mix Grease for the first time, all  
components should be thoroughly cleaned prior to  
lubricating.  
Apply oil at all pivot points and pin connections.  
1
2
OF1792  
1
1. Damper Locknut  
2. Damper  
5. Steering Lever  
6. Brake Interlock  
REF  
LUBRICATION  
QTY  
DESCRIPTION-  
LOCATION  
INTERVAL  
1
2
REPACK  
GREASE  
2
1
CASTER PIVOT  
AXLE PIVOT  
400 Hrs  
50 Hrs  
3. Tie-Rod Jam Nut  
4. Tie-Rod  
7. Hydrostatic  
Transmission  
OIL  
ALL PIVOT POINTS,  
PIN CONNECTIONS  
50 Hrs  
Figure 11  
OF3381  
Figure 10  
GB - 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
If tire pressure adjustment does not solve tracking  
problem, adjust the limiter bolts on the stop bracket  
(Figure 12). Front bolts adjust forward and rear bolts  
adjust reverse. Lengthen the limiter bolt (move closer to  
lever) on side which is too fast.  
Eliminating Excessive Creeping of the Unit  
WARNING: This adjustment requires operating  
the engine. Use extreme care to avoid contact  
with moving parts and hot surfaces. Be sure  
rear of unit is well supported and secure before  
starting engine.  
1. If hydraulic system is cold, run unit for a minimum of  
five minutes, then shut OFF engine.  
2. With the unit up to and facing a wall, jack the unit up  
so that both drive wheels are off the ground.  
3. Start the engine and release the parking brake.  
4. Move the steering levers from Forward to Reverse  
several times to make sure controls are free. Then  
return steering levers to neutral position.  
5. Check wheel(s) for movement.  
6. Shut OFF engine.  
NOTE: The right and left steering levers are adjusted the  
same way. To access the tie-rod, place seat in service  
position.  
7. Adjust tie-rod(s):  
If the wheel is moving in a forward direction:  
a. Loosen the jam nut on each end of the tie-rod.  
OF3577  
b. Turn tie-rod counterclockwise (lengthening the  
distance between the steering lever and  
hydrostatic transmission) several times.  
1. Limiter Bolt  
2. Jam Nut  
3. Steering Lever  
4. Stop Bracket  
Figure 12  
If the wheel is moving in a reverse direction:  
ADJUSTING THE HEIGHT OF THE  
STEERING LEVER HANDLES  
The handles have three height positions (Figure 13).  
a. Loosen the jam nut on each end of the tie-rod.  
b. Turn tie-rod clockwise (decreasing the distance  
between the steering lever and hydrostatic  
transmission) several times.  
8. Return seat to operating position.  
9. Start engine.  
10. Move steering levers from Forward to Reverse  
several times. Then return steering levers to neutral  
position.  
11. Shut OFF engine.  
12. If wheel is not moving, tighten jam nuts on tie-rod.  
The adjustment is complete.  
Position # 1  
Position # 2  
13. If wheel is still moving, repeat steps 7 through 12.  
Position # 3  
ADJUSTING THE UNIT TO TRACK  
STRAIGHT  
1. Eccentric  
Spacer  
2. Handle  
3. Steering Lever  
WARNING: Prior to adjusting the tracking of  
the unit, shut OFF engine, engage parking  
brake, and remove the ignition key.  
Figure 13  
OF3570  
Check and adjust tire pressure. Increase pressure on  
side unit tracks to. DO NOT exceed maximum  
recommended tire pressure. See Specifications on  
page 27 for correct tire pressure.  
1. Shut OFF engine. Engage parking brake. Remove  
the ignition key.  
GB - 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
2. Remove the spacer, handle, and eccentric spacers  
from the steering lever.  
is 1-1/2" (3.81 cm) clearance between the jam nuts  
and trunnion.  
NOTE: Position the right and left handles at the same  
3. Tighten jam nuts together.  
height position.  
4. Turn the return nuts clockwise to decrease the  
distance or counterclockwise to increase the  
distance until there is 1/16 to 1/8" (1.59 to 3.18 mm)  
between the return nuts and trunnion.  
3. Install the eccentric spacers, spacers and handle in  
the appropriate height position. Do not tighten the  
nuts holding the eccentric spacers.  
4. Turn the eccentric spacer until the right and left  
handles are the same height. Tighten nut.  
5. Tighten return nuts together.  
BELTS  
ADJUSTING THE PARKING BRAKE  
WARNING: MOVING PARTS can cut or  
amputate body parts. ALWAYS wait for moving  
parts to stop before performing maintenance or  
service.  
The parking brake might need adjustment over time and  
after new brake pads have been installed.  
NOTE: After installing new brake pads in the calipers,  
they must be burnished by driving for a short distance  
(about 100 feet) with the brake on. To do this, bring the  
parking brake lever part-way up while driving in a straight  
line. This quickly breaks-in the pads for maximum effec-  
tiveness.  
CAUTION: DAMAGED OR WORN BELTS may  
result in injury and/or damage to unit. Check  
belts for excessive wear or cracks often.  
Belt Access  
1/16 to 1/8" (1.59  
to 3.18 mm)  
1-1/2"  
(3.81 cm)  
1. Properly stop and park unit (refer to Operation  
Section).  
2. Lower the mower.  
3. Place seat in most rearward position.  
4. Remove belt covers.  
5. Place foot board in open position (Figure 15).  
6. Secure raised footboard with latch.  
1. Footboard in  
open position  
2. Pivot  
3. Support  
Frame  
4. Latch  
1. Parking Brake Lever  
2. Brake Rod  
4. Trunnion  
5. Spring  
3. Return Nuts  
6. Jam Nuts  
Figure 14  
OF3303  
Figure 15  
Replacing Mower Belts  
Check Adjustment  
NOTE: Be sure to check the parking brake on both sides  
of the unit (Figure 14).  
OF3580  
NOTE: Long mower belt must be removed to remove  
short mower belt.  
With the parking brake engaged, the spring length should  
measure 1 1/2" between the jam nuts and the trunnion  
and the clearance between the return nuts and trunnion  
should measure 1/16 to 1/8" (1.59 to 3.18 mm). If either  
of these measurements is off, adjust the parking brake  
appropriately.  
CAUTION: Use care when releasing idler spring  
tension. Keep body parts well away from idlers  
when performing this operation.  
Adjust the Parking Brake  
1. Slowly release the tension on the long mower belt  
idler until all the tension is removed from the  
springs.  
1. Engage the parking brake.  
2. Turn the jam nuts clockwise to compress the spring  
or counterclockwise to extend the spring until there  
GB - 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                         
2. Remove long mower belt from left blade spindle  
and remove from deck.  
4. Slowly release the tension on the hydro pump belt  
idler until all the tension is removed from the  
springs.  
3. Slowly release the tension on the short belt idler  
until all the tension is removed from the springs.  
5. Remove old hydro pump belt from right hand  
hydrostat sheave first (Figure 17).  
4. Remove short mower belt from right blade spindle  
and from deck. Idler pivot bolt must be loosened  
slightly to gain clearance to remove belt from under  
idler pulley (Figure 16).  
6. Install new hydro pump belt by positioning belt on  
sheaves. Put belt onto right hand hydrostat sheave  
last.  
5. Arrange new mower belt(s) on deck (short belt  
first). Retighten short mower belt idler pivot bolt.  
Install belts on sheaves. Put belts onto center  
sheave last.  
7. Replace clutch anchor.  
8. Replace long mower belt on mower clutch sheave.  
6. Replace belt covers and return foot board to closed  
position.  
72" Belt  
Layout  
52" and 60"  
Belt Layout  
1. Right Hand Hydrostat  
2. Hydro Belt  
3. Left Hand Hydrostat  
4. Spring  
5. Clutch  
6. Clutch Anchor  
7. Engine Sheave  
8. Idler  
OF1631  
Figure 17  
1. Long Mower Belt  
2. Springs  
3. Center Sheave  
4. Short Mower Belt Idler  
5. Short Mower Belt  
6. Mower Clutch Sheave  
7. Long Mower Belt Idler  
MOWER DECKS  
Adjusting Anti-Scalp Rollers  
The anti-scalp rollers are set at the factory for typical  
mowing height, but can be adjusted for high or low  
cutting conditions (Figure 18).  
Rollers are intended to prevent lawn scalping, not to  
control cutting height.  
Figure 16  
Replacing the Hydro Pump Belt  
OF1641  
For a very high cutting height, set the rollers in their  
lowest position on the bracket.  
1. Properly stop and park unit (refer to Operation  
Section).  
For a very low cutting height, set the rollers in their  
highest position on the bracket.  
2. Remove the long mower belt from the mower clutch  
All rollers should be set at the same height.  
CAUTION: Use care when releasing idler spring  
tension. Keep body parts well away from idlers  
when performing this operation.  
3. Remove clutch anchor.  
GB - 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                   
Level the mower with the slots where 4 chains fasten to  
the mower mounting brackets (Figure 20).  
Lowest  
Cutting  
Height  
1. Shut off engine. Engage parking brake. Remove  
the ignition key.  
2. Raise mower deck to its highest position and place  
4.75 in. (12.1 cm) tall blocks at each rear corner  
and 4.625 in. (11.7 cm) tall blocks at each front  
corner.  
Highest  
Cutting  
Height  
3. Lower deck onto the blocks.  
4. Loosen the locknuts on the side where the chains  
are slack and slide the bolt down the slot until the  
chains are tight.  
Figure 18  
Removing the Mower Deck  
OF3590  
5. Tighten the locknuts.  
1. Remove PTO (long) mower belt. See Replacing  
6. Lift mower and remove blocks.  
7. Measure height of deck at each side.  
Measurements must be within 3/16 in. (4.76 mm) of  
each other.  
2. Remove link chains from mower lift arms. Note hole  
location on mower lift arms for replacement.  
3. Remove mower mounting arms from frame.  
4. Slide mower deck out from under unit.  
8. If measurements are out of range, fix by adjusting  
chains on low side of deck.  
9. Once deck is level side to side, measure height of  
deck at middle of front and on both sides of rear.  
Front of deck should be 1/8 in. + 1/8 in. (3.18 + 3.18  
mm) lower than rear.  
3
3
1
1
1. Mower Lift Arm  
2. Link Chain  
3. Mower Mounting Arm  
4. PTO (Long) Mower  
Belt  
Of0316  
Figure 19  
5
2
4
1. Chains  
2. Lock Nuts and Slots  
3. Mower Mounting  
Brackets  
4. 4.675 in. (11.7 cm)  
Blocks  
5. 4.75 in. (12 cm) Blocks  
Installing the Mower Deck  
1. Slide mower deck under unit.  
2. Install mower mounting arms on frame.  
3. Install link chains on the mower lift arms in the  
same holes they were removed from.  
Figure 20  
OF3760  
4. Install PTO (long) mower belt. See Replacing  
5. Level mower deck.  
Leveling the Mower Deck  
These adjustments should be made on a level surface  
with the tires inflated to the correct air pressure.  
GB - 24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
LONG TERM  
STORAGE  
Clean unit thoroughly with mild soap and low pressure  
water and lubricate (See Lubricate Unit on page 20 in  
Maintenance). Touch up all scratched painted surfaces.  
WARNING: AVOID INJURY. Read and  
understand entire Safety section before  
proceeding.  
Remove weight from wheels by putting blocks under  
frame or axle.  
When storing unit for extended periods of time, remove  
all fuel from tank and carburetor (run dry). Refer to  
Engine Manual.  
SHORT TERM  
NEVER spray unit with high pressure water or store unit  
outdoors.  
Clean and charge the battery. Charge battery every three  
to four weeks when storing unit.  
Inspect unit for visible signs of wear, breakage or  
damage.  
To Take the Unit Out of Storage  
Keep all nuts, bolts and screws properly tightened and  
know unit is in safe working condition.  
1. Refer to the engine service manual to prepare the  
engine for service.  
Store unit in a cool, dry protected area.  
2. Put fresh, clean fuel in the fuel tank.  
3. Begin the maintenance schedule.  
4. Charge and install the battery.  
TROUBLESHOOTING  
PROBLEM  
PROBABLE CAUSE  
CORRECTION  
1. PTO engaged.  
1. Disengage PTO.  
Engine does not  
crank.  
2. Parking brake disengaged.  
3. Loose or corroded battery cables.  
2. Engage parking brake.  
3. Clean and tighten battery cables (see  
4. Discharged battery.  
4. Charge battery (see Battery on page 19).  
5. See your Gravely Dealer.  
5. Faulty starter.  
1. Fuel tank empty.  
1. Fill fuel tank (see Filling Fuel Tank on  
Engine cranks but  
does not start.  
page 13).  
2. Faulty spark plug.  
3. Air cleaner is plugged or dirty.  
4. Fuel filter is dirty.  
2. Replace spark plug. Refer to Engine  
Manual.  
3. Clean or replace air cleaner. Refer to  
Engine Manual.  
4. Clean or replace fuel filter. Refer to  
Engine Manual.  
5. Faulty engine.  
5. Refer to Engine Manual or see your  
Gravely Dealer.  
1. Discharged battery.  
1. Oil pressure is low.  
1. Charge battery (see Battery on page 19).  
Battery light does not  
light up when starting  
engine.  
1. Refer to Engine Manual.  
Oil pressure light is  
on.  
1. Ignition ground wire disconnected.  
2. Ignition switch failure.  
1. Connect ground wire to clean metal  
surface.  
Engine continues to  
run when ignition key  
is in the off position.  
2. Replace ignition switch (see your Gravely  
Dealer).  
GB - 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
TROUBLESHOOTING  
PROBLEM  
PROBABLE CAUSE  
CORRECTION  
1. Operator presence switch not depressed.  
2. Eye-QTM alarm setting is turned on.  
1. Depress operator presence switch by  
sitting on seat.  
PTO or mower blades  
do not engage or  
shuts off.  
2. Turn off the alarm that deactivates the  
PTO on a regular schedule. See Eye-Q  
Owner’s Manual.  
3. The Eye-QTM circuitry senses an  
overload to the PTO clutch and is  
shutting off the PTO switch.  
3. Check the mower deck for clogging or  
debris. Check the electrical system to the  
clutch for damage or wear.  
4. Faulty PTO switch.  
4. See your Gravely Dealer.  
1. Parking brake engaged.  
1. Disengage parking brake.  
Unit does not drive.  
2. Transmission bypass levers open.  
2. Close transmission bypass levers (see  
3. Hydraulic oil level low.  
3. Add hydraulic oil (see Hydraulic Fluid on  
4. Faulty hydraulic drive system.  
4. See your Gravely dealer.  
SERVICE PARTS  
ACCESSORIES  
Part No.  
Qty Description  
Part No.  
Description  
01554800  
21539600  
21539700  
21537000  
21536900  
21536300  
21535800  
21397200  
09246900  
21536100  
21525900  
07240700  
07241300  
07242300  
07222300  
07235000  
07237700  
07242000  
04916400  
04917900  
09081200  
08866900  
09290500  
09290600  
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
Battery  
78803500  
78803900  
79200300  
79200400  
79200900  
79201000  
79201600  
79201700  
79202000  
79202100  
79202300  
79202400  
79202600  
79202800  
79203100  
89200100  
89200200  
52" Mulching Kit  
Air Filter Outer Element - Kawasaki  
Air Filter Inner Element - Kawasaki  
Outer Primary Element - Kohler  
Inner Safety Element - Kohler  
Element Precleaner - Kohler 25 HP  
Engine Oil Filter - Kawasaki  
Engine Oil Filter - Kohler  
Hydraulic Oil Filter  
52" Bahia/Tall Grass Baffle Kit  
60" Mulching Kit  
Discharge Cover Kit - 60" Decks  
72" Mulching Kit  
Discharge Cover Kit - 72" Decks  
60" Bahia/Tall Grass Baffle Kit  
Counterweight Kit  
Spark Plug - Kawasaki  
Spark Plug - Kohler  
72" Bahia/Tall Grass Baffle Kit  
Liftmaster Kit  
PTO (Engine to Deck) Belt (52")  
PTO (Engine to Deck) Belt (60")  
PTO (Engine to Deck) Belt (72")  
Mower Drive Belt (52")  
Mower Drive Belt (60")  
Mower Drive Belt (72")  
Traction (Hydro Pump) Belt - Poly V  
Blade (52")  
Hitch Kit  
Antiscalp Wheel Kit  
Lawn Striper Kit, 60" and 72"  
Discharge Cover Kit - 52" Decks  
Lawn Striper Kit, 52"  
Rollover Protection System (ROPS)  
Mulch Blade (52")  
60" Bagger (Peco) (requires bumper p/n  
09249953)  
Blade (60")  
Mulch Blade (60")  
89200500  
60" Bagger  
Blade (72")  
Mulch Blade (72")  
GB - 26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SPECIFICATIONS  
Model Number  
Model  
992066  
252Z  
992067  
992068  
992069  
992070  
272Z  
992071  
252Z  
992072  
272Z  
260Z  
260Z  
260Z  
Length – cm (in)  
Height – cm (in)  
Width – cm (in)  
203 (80)  
127 (50)  
165 (65)  
185 (73)  
216 (85)  
165 (65)  
216 (85)  
Weight Actual – kg (lbs) 476.2 (1050)  
510.2 (1125)  
532.9 (1175) 476.2 (1050) 532.9 (1175)  
Battery  
12 volt  
Brakes  
Hydro/Dynamic Drum– Parking  
0
Turning Radius  
Tire Size  
Front  
Rear  
15 x 6 - 6  
24 x 12 - 12  
Engine – manufacturer  
Model Number  
Cycle  
Kawasaki  
Kawasaki  
Kohler  
Kohler EFI  
CV74SS  
4
Kawasaki  
Kohler  
FH721V  
CV740S  
FH721V  
CV740S  
Engine Power – HP  
(kW) @ Governed RPM  
25 (18.6)  
27 (20.1)  
28 (20.9)  
25 (18.6)  
27 (20.1)  
Governed RPM  
Idle RPM  
3600  
1800  
Starting System  
Fuel Tank Capacity  
Fuel  
Electric  
14 gals. US (53 liters)  
See Engine Manual  
Air Cleaner  
Heavy Duty Dual Element with Pre-Clean Screen  
Air Cooled  
Cooling Capacity  
Engine oil type  
Spark Plug Gap  
Transmission  
See Engine Manual  
See Engine Manual  
Hydrostatic Drive  
Speed – Forward Max.  
Reverse Max.  
13 MPH (20.8 KM/H)  
6 MPH (9.6 KM/H)  
Transmission Lube  
Drive Clutch  
Mobil 1 15W-50 Synthetic  
Hydrostatic  
20-25 psi (138-172 kN/m2)  
12-15 psi (83-103 kN/m2)  
Tire Pressure Front  
Rear  
Lift System  
Hydraulic  
Power Take Off  
Electric PTO Clutch/Brake  
Cutting Width – cm (in)  
Cutting Height – cm (in)  
Cut Increments – cm (in)  
132 (52)  
152 (60)  
183 (72)  
132 (52)  
183 (72)  
2.5 - 12.7 (1 - 5)  
Infinite between 2.5 -12.7 (1 - 5)  
226.8 (500)  
Max. Towing Capacity –  
kg (lbs)  
Max. Tongue Weight –  
kg (lbs)  
22.7 (50)  
GB - 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2-Year Limited Warranty  
Gravely Division of Ariens Company (Gravely) hereby warrants to the  
original consumer purchaser that all Gravely Two-Wheel,  
Professional G, Pro, and ProMaster products will be free from defects  
in material and workmanship for a period of two (2) years from the date  
of purchase or 1000 hours, whichever comes first.  
Gravely Division of Ariens Company  
655 West Ryan Street  
P.O. Box 157  
Brillion, WI 54110-0157  
920-756-2141  
Fax 920-756-2407  
Protection Plan  
Gravely will repair or replace any part found upon examination by  
Gravely to be defective. Such repair or replacement will be free of  
charge to the purchaser (labor and parts), except as noted below.  
This warranty is subject to the following exceptions, conditions, and limitations:  
Usage Requirement  
The duration of this warranty shall be ninety days or 1000 hours, whichever comes first, if the product is rented or leased.  
Purchaser’s Responsibilities  
Exclusions (No Warranty)  
• The purchaser must perform maintenance and minor  
adjustments per the operator’s manual.  
• The purchaser must notify Gravely or an authorized Gravely  
service representative of the need for warranty service.  
• The purchaser must transport the product to and from the place  
of warranty repair.  
• Normal maintenance, services, and normal replacement items,  
such as spark plugs, oil, oil filters, air filters, mufflers, belts,  
tires, shoes, runners, scraper blades, shear bolts, mower blades,  
mower vanes, headlights, light bulbs, knives, etc. are not covered  
by this warranty.  
• Any equipment which has been altered, misused, misassembled,  
improperly adjusted, neglected, or damaged by accident is not  
covered by this warranty.  
• Service completed by someone other than an authorized  
Gravely dealer is not covered by this warranty.  
• Any attachment not approved by Gravely nor any parts that  
are not genuine Gravely service parts are not covered by this  
warranty.  
• Engines and engine accessories are covered only by the  
warranty made by the engine manufacturer, and are not covered  
by this warranty.  
• If the product is equipped with a Hydro-Gear transmission  
and/or Hydro-Gear drive components, the Hydro-Gear  
transmission and/or drive components are covered only by the  
warranty made by Hydro-Gear, and are not covered by this  
warranty.  
• This warranty applies only to products purchased in the United  
States (including Puerto Rico) and Canada. In all other  
countries, contact place of purchase.  
Product Registration  
• Returning the product registration card to Gravely will enable  
the company to contact the registrant with repair or replacement  
part information.  
Service Parts and Accessories  
• Service parts and accessories not purchased with the product  
covered by this warranty are warranted to be free of defects  
for a period of ninety (90) days following the date of purchase,  
and will be replaced free of charge (except for labor).  
Service  
• Warranty service must be done by an authorized Gravely dealer.  
To find an authorized Gravely service representative, contact  
Gravely at the website, number or address above.  
Battery Warranty Prorated  
• One to three months - Free replacement  
• Four to twelve months - Prorated over 12 months  
Gravely may from time to time change the design of its products. Nothing contained in this warranty shall be construed as obligating  
Gravely to incorporate such design changes into previously manufactured products, nor shall such changes be construed as an admission  
that previous designs were defective.  
LIMITATION OF REMEDY AND DAMAGES  
DISCLAIMER OF FURTHER WARRANTY  
Gravely’s liability under this express warranty, and under any implied  
Gravely makes no warranty other than what is  
warranty that may exist, is limited to repair or replacement of any  
defective part. In no event shall Gravely be liable for incidental,  
expressly made in this warranty. If the law of your  
state provides that an implied warranty of  
merchantability, or an implied warranty of fitness  
for a particular purpose, applies to Gravely, any  
such implied warranty is limited to the duration of  
this express warranty.  
special, or consequential damages (including lost profits). This  
warranty gives you specific legal rights.You may also have other  
rights which vary from state to state. Some states do not allow the  
exclusion of incidental or consequential damages, or limitations on  
how long an implied warranty lasts, so the above limitations and  
exclusions may not apply to you.  
Form: GLW2-122002  
GB - 28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
GRAVELY  
A Division of Ariens Company  
655 West Ryan Street  
P.O. Box 157  
Brillion, WI 54110-0157  
920-756-2141  
Fax 920-756-2407  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Lawn Mower 37416 User Guide
Craftsman Lawn Mower 24727022 User Guide
Craftsman Lawn Mower 917255561 User Guide
Craftsman Lawn Mower 917388191 User Guide
Husqvarna Lawn Mower 532 42 57 62 User Guide
Husqvarna Lawn Mower YTH210XP User Guide
McCulloch Lawn Mower Accessory M53 170WFP User Guide
Snapper Lawn Mower 1600222 User Guide
Snapper Lawn Mower LT140H33DB User Manual
Snapper Lawn Mower WRP216517BE User Manual