Dixon Lawn Mower Accessory 3302 User Guide

DIXON INDUSTRIES, INC. A  
BLOUNT COMPANY AIRPORT  
INDUSTRIAL PARK  
PO BOX 1569  
COFFEYVILLE KS 673370945  
316251 2000  
FAX 316 251 4117  
TECHNICAL DATA  
ZTR Model 3302  
IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATING OR MAKING ADJUSTMENTS  
SEAT ADJUSTMENT  
1. Pull or lift body retention latch P/N 3954  
from transaxle backing plate, raise and  
push body and seat assembly forward.  
2. Loosen four seat bolts, P/N 3227 and  
slide seat forward or backward to  
desired position.  
3. Re -tighten seat adjustment bolts P/N  
3227. DO NOT operate mower without  
seat adjustment bolts properly  
tightened.  
4. Close upper body and push retention  
latch P/N 3954 over transaxle backing  
plate.  
Page 1 of 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MOWER BLADE OPERATION  
To engage mower blades, turn engagement lever on floor slowly to the "ON" position. To  
Disengage mower blades, turn lever slowly to the "OFF" position.  
SAFETY CHECKS  
IMPORTANT- PERFORM SAFETY CHECKS AFTER MAKING ANY REPAIRS OR ADJUSTMENTS  
1.  
2.  
After reassembly, while seated on mower, attempt to start engine with mower deck  
engaged. Engine should not start. If engine does start, return the mower to an Authorized  
Dixon dealer for adjustment or repair.  
Disengage mower deck and start engine. With the operator in the normal seated position,  
engage mower deck and remove weight from seat. The engine should stop. If the engine  
does not stop when operator rises from seat, return the mower to an Authorized Dixon  
dealer for adjustment or repair.  
3.  
Engage, then disengage mower blade in each cutting height. Insure that blade  
disengages and comes to a stop within (5) seconds in each height position. If blade does  
not disengage properly, contact your Authorized Dixon dealer.  
CAUTION: DO NOT OPERATE MOWER IF ANY SAFETY FEATURE IS NOT FUNCTIONING CORRECTLY  
PARKING BRAKE ADJUSTMENT  
Remove the body as described above. Tighten nut on brake rod P/N 2533 located in front of  
the transaxle on each side, just enough to prevent brake from slipping when engaged.  
CAUTION: Over-tightening may cause premature wear on the brake band P/N 5085  
Revised 7/93 P/N  
8114  
Page 3 of 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3302 BODY ASSEMBLY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3302 CHASSIS ASSEMBLY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3302 TRANSAXLE ASSEMBLY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3302 MOWER DECK ASSEMBLY 30"  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3302 WIRING ASSEMBLY  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Agri Fab Lawn Mower 45 0358 User Manual
Billy Goat Lawn Mower FM3300IN FM3300INE User Manual
Billy Goat Lawn Mower OS552H User Manual
Huskee Lawn Mower HU500N22SH User Guide
Ingersoll Rand Lawn Mower 650935 X43 C User Guide
Sears Lawn Mower 917372852 User Guide
Snapper Lawn Mower CSC2142 User Manual
Snapper Lawn Mower N250816B User Manual
Snapper Lawn Mower YZ145332BVE YZ145382BVE User Manual
Snapper Lawn Mower ZF2100DKU User Guide