Cub Cadet Lawn Mower 19A70001000 User Guide

To The Owner • Carton Contents • Assembly • Parts Lists • Warranty  
OPERATOR’S MANUAL  
Twin Rear Bagger Kit  
For i1000 Series Lawn Tractors  
with a 42” Timed Deck  
Model 19A70001000  
IMPORTANT  
READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION  
FORM NO. 769-03805A  
4/10/2008  
PRINTED IN U.S.A.  
CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES  
Use this page to make notes and write down important information.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS OF CARTON  
Before beginning installation, remove all parts from the carton to make sure everything is present. Carton  
contents are listed below and shown in Figure 2-1.  
2
One Chute Tube  
Two Mounting Brackets  
One Cross-Support Bracket  
Two Bracket Supports  
One Catcher Support  
One Discharge Chute Assembly  
Two Grass Bag Assemblies  
One Support Tube  
Carton  
Contents  
One Grass Catcher Cover Assembly  
Chute Tube  
Discharge Chute  
Assembly  
If you are missing any  
parts, call the Customer  
Dealer Referral Line at  
1-877-282-8684,  
Support Tube  
Grass Bag  
Cover Assembly  
or visit  
find the nearest Cub  
Cadet service dealer in  
your area.  
Bracket Support  
Grass Bag Assemblies  
Catcher Support  
Mounting Bracket  
Cross Support  
Bracket  
Figure 2-1  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS OF HARDWARE PACK  
This grass collector kit is shipped with a hardware pack enclosed. Please check your hardware pack against  
the illustration below.  
2
Carton  
Contents  
Group A  
Assembling and Attaching Mounting Bracket  
Clevis Pin (1)  
Hex Bolt  
5/16-18 x .750 (6)  
If you are missing any  
parts, call the Cus-  
tomer Dealer Referral  
Line at 1-877-282-8684,  
or visit  
Hairpin Clip (1)  
Flange Lock Nut  
5/16-18 (6)  
find the nearest Cub  
Cadet service dealer in  
your area.  
Hex Bolt  
1/4-20 x .620 (8)  
Flange Lock Nut  
1/4-20 (8)  
Figure 2-2  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembling and Attaching  
The Bracket Assembly  
(Hardware Group A)  
IMPORTANT: Before assembly, place the tractor on  
a firm, level surface, disengage the PTO, stop the  
tractor engine and set the parking brake.  
3
Assembling  
and  
1. Assemble the mounting bracket assembly as shown  
in Figure 3-1.  
Attaching  
Mounting  
Bracket  
NOTE: The mounting bracket assembly may have been  
preassembled at the factory, if this is the case, skip Step  
1 and proceed to Step 2.  
2. For convenience, pivot the seat forward and leave  
it in that position until the grass collector is fully  
mounted and assembled.  
3. Position the bracket assembly to the outside of the  
hitch plate. See Figure 3-2.  
Figure 3-2  
4. Push the hooked ends of the bracket assembly in (A)  
and under the shoulder bolts (B) and swing in the  
bottom down over the hitch plate aligning with the  
hole on the hitch plate (C). See Figure 3-3.  
5. Insert the clevis pin through the aligned holes in both  
the bracket assembly and the hitch plate and secure  
with the hairpin clip. Refer to Figure 3-4.  
A
NOTE: There are two holes in the clevis pin. Be sure  
to insert the hairpin clip in the upper hole to properly  
secure the bracket assembly to the hitch plate.  
IMPORTANT:  
Before assembly, place  
the tractor on a firm,  
level surface, disengage  
the PTO, stop the tractor  
engine and set the park-  
ing brake.  
C
B
Figure 3-3  
NOTE:  
There are two holes in  
the clevis pin. Be sure  
to insert the hairpin  
clip in the upper hole  
to properly secure the  
bracket assembly to the  
hitch plate.  
Upper Hole  
Figure 3-1  
Figure 3-4  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attaching Grass Bags &  
Grass Bag Cover  
1. Place the support tube in position on the rear of unit  
by sliding the support tube down through the holes in  
the left side of the bracket assembly. Use the inside  
hole on the bracket assembly. Refer to Figure 4-1.  
4
Attaching  
Grass Bags  
& Grass Bag  
Cover  
2. Attach the grass bags by hooking them onto the grass  
bag bracket using the slots in the grass bag and the  
tabs on the grass bag bracket as shown in Figure 4-2.  
3. Remove the clevis pins, belleville washers, and  
hairpin clips, from the hinge brackets on the grass bag  
cover.  
4. Place the grass bag cover on top of the grass bags  
and align the holes on the hinges of the grass bag  
cover with the corresponding holes on the support  
tube assembly. See Figure 4-3.  
Figure 4-1  
5. Insert the clevis pin through the hinge on the support  
tube assembly and then through the grass bag cover.  
See Figure 4-4.  
6. Secure with belleville washer and hairpin clip with the  
crown side of the washer going against the hairpin  
clip. See inset images in Figure 4-4.  
NOTE:  
Insert the clevis pins  
from the outside in as  
shown in the inset  
images of Figure 4-4.  
7. Repeat with the second set of hardware through the  
second hinge of the grass bag and the tube assembly  
from the opposite direction.  
NOTE:  
It is very important to  
maintain this order and  
direction while installing  
these hardware pieces.  
After installation, make  
sure that the grass bag  
cover pivots on the sup-  
port tube and opens.  
NOTE: Insert the clevis pins from the outside in as  
shown in the inset images of Figure 4-4. It is very  
important to maintain this order and direction while  
installing these hardware pieces. After installation, make  
sure that the grass bag cover pivots on the support tube  
and opens.  
Figure 4-2  
Figure 4-4  
Figure 4-3  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attaching Discharge Chute  
A
1. Lower the deck to its lowest position.  
2. Raise the chute deflector on the deck (A) and hold it  
while you position the discharge chute over the chute  
opening. See Fig. 5-1.  
5
B
3. Insert the pin (B) on the discharge chute into the hole  
on the deck as indicated by the arrow in Fig. 5-1.  
Attaching  
Discharge  
Chute  
4. Push down on the discharge chute so that it covers  
the opening of the deck completely.  
C
5. Lock the discharge chute in position by stretching the  
retainer strap over the front deck wheel bracket and  
hooking onto the bottom of the bracket as seen in the  
inset (D) in Fig. 5-1.  
&
Bagger  
Usage  
D
6. Insert the curved end of chute tube into the hole in  
the grass bag cover. See Fig. 5-2.  
Figure 5-1  
7. Place the lower end of the chute tube over the  
discharge chute so that the tabs on the discharge  
chute fits into the pockets on the chute tube. See Fig.  
5-3.  
8. Secure by hooking the two retainer straps of the  
discharge chute to the pins on the chute tube. See  
Fig. 5-3.  
Bagger Usage  
NOTE: When both grass bags are full, place the tractor  
on a firm, level surface, disengage the PTO, turn the  
tractor engine off and set the parking brake.  
1. Flip Seat up.  
2. Lift up grass bag cover. Do not remove the chute  
tube assembly from the tractor.  
3. Remove the grass bags by lifting these up and mov-  
ing the bags away from the support tube assembly.  
4. Empty the grass clippings at a proper disposal sight,  
use the handle at the bottom of each grass bag.  
Holding the bag firmly, empty the contents  
Figure 5-2  
5. Replace grass bags, close lid, flip down seat, restart  
your tractor and resume cutting your grass.  
Pocket  
Tab  
Figure 5-3  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
NOTES  
Use this page to take  
notes and write down  
important information.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
18  
11  
12  
2
16  
14  
19  
17  
20  
12  
21  
14  
8
17  
13  
1
7
30  
32  
14  
20  
20  
14  
9
7
28  
29  
26  
13  
17  
31  
24  
27  
14  
25  
13  
23  
10  
22  
9
6
3
15  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REF  
NO.  
PART  
NUMBER  
DESCRIPTION  
Bracket Support  
8
1
2
3
4
5
6
7
8
9
16587D  
16592  
Illustrated  
Parts List  
Support Tube Assembly  
Catcher Bag  
764-0221  
664-04017 Grass catcher Cover Assembly  
683-04348 Mounting Bracket - RH  
683-04350 Mounting Bracket - LH  
710-0597  
710-0751  
710-3008  
Screw 1/4-20 x 1”  
Hex Screw 1/4-20 x0.620  
Hex Screw 5/16-18 x 0.75”  
10 711-0309A Clevis Pin  
11 711-04069  
12 711-1421  
Grass catcher Pin  
Clevis Pin  
Y
13 712-04063 Flange Lock Nut, 5/16-18  
14 712-04064 Flange Lock Nut, 1/4-20  
15 714-0117  
16 714-0145  
Hairpin Clip  
Click Pin  
To order replacement  
parts, call the Customer  
Dealer Referral Line at  
1-877-282-8684,  
17 723-04008A Chute Strap - 6”  
18 731-0899E Catcher Tube  
or visit  
19 736-0331  
20 736-3092  
21 783-0601  
22 783-0765  
23 864-0221  
24 16591A  
Bell Washer  
find the nearest Cub  
Cadet service dealer in  
your area.  
Flat Washer  
Catcher Support Bracket  
Cross Support Bracket  
Grass Bag Assy.  
Bag Hanger Bracket  
Machine Screw, #10-24 x .5  
25 710-0473  
26 710-0604A Self-Tapping Screw 5/16-18  
27 712-0272 Hex Sems Nut, #10-24  
28 749-0701A Grass Bag Frame  
29 711-05008  
Belt Pin Guard, 1/4 x 1.43  
30 731-06099 Chute Elbow, 42” Timing Deck  
31 732-04510 Spring Hook  
32 738-0754  
Shoulder Screw, .437 x .54  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUB CADET LLC  
MANUFACTURER’S LIMITED WARRANTY  
FOR SEPARATELY SOLD ATTACHMENTS AND ACCESSORIES  
IMPORTANT: To obtain warranty coverage owner may be required  
a. Routine maintenance items such as lubricants, filters, blade  
sharpening, tune-ups, brake adjustments, clutch adjustments, deck  
adjustments, and normal deterioration of the exterior finish due to  
use or exposure.  
to present an original proof of purchase and applicable maintenance  
records to the servicing dealer. Please see the operator’s manual for  
information on required maintenance and service intervals.  
The limited warranty set forth below is given by Cub Cadet LLC with  
respect to new merchandise purchased or leased and used in the United  
States and/or its territories and possessions, and by MTD Products  
Limited with respect to new merchandise purchased or leased and  
used in Canada and/or its territories and possessions (either entity  
respectively, “Cub Cadet”).  
b. Service completed by someone other than an authorized service  
dealer.  
c. Cub Cadet does not extend any warranty for products sold or  
exported outside of the United States and/or Canada, and their  
respective possessions and territories, except those sold through  
Cub Cadet’s authorized channels of export distribution.  
Cub Cadet warrants this product (excluding its Normal Wear Parts,  
as described below) against defects in material and workmanship for  
a period of three (2) years commencing on the date of original retail  
purchase or lease and will, at its option, repair or replace, free of charge,  
any part found to be defective in materials or workmanship.  
d. Replacement parts and\or accessories that are not genuine Cub  
Cadet parts.  
e. Transportation charges and service calls.  
f. Commercial or Institutional Use.  
Normal Wear Parts are warranted to be free from defects in material and  
workmanship for a period of thirty (30) days from the date of original  
purchase or lease. Normal wear parts include, but are not limited to  
items such as: belts, blades, blade adapters, grass bags, rider deck  
wheels, seats, and tires.  
There are no implied warranties, including without limitation any  
implied warranty of merchantability or fitness for a particular  
purpose. No warranties shall apply after the applicable period of  
express written warranty above. No other express warranties beyond  
those mentioned above, given by any person or entity, including a  
dealer or retailer, with respect to any product, shall bind Cub Cadet.  
The exclusive remedy is repair or replacement of the product as  
set forth above. The terms of this warranty provide the sole and  
exclusive remedy arising from the sale and/or lease of the products  
covered hereby. Cub Cadet shall not be liable for any incidental or  
consequential loss or damage including, without limitation, expenses  
incurred for substitute or replacement lawn care services or for  
rental expenses to temporarily replace a warranted product.  
This limited warranty shall only apply if this product has been operated  
and maintained in accordance with the Operator’s Manual furnished  
with the product, and has not been subject to misuse, abuse, neglect,  
accident, improper maintenance, alteration, vandalism, theft, fire, water,  
or damage because of other peril or natural disaster. Damage resulting  
from the installation or use of any part, accessory or attachment not  
approved by Cub Cadet for use with the product(s) covered by this  
manual will void your warranty as to any resulting damage. In addition,  
Cub Cadet may deny warranty coverage if the hour meter, or any part  
thereof, is altered, modified, disconnected or otherwise tampered with.  
Some jurisdictions do not allow the exclusion or limitation of incidental  
or consequential damages, or limitations on how long an implied  
warranty lasts, so the above exclusions or limitations may not apply to  
you.  
HOW TO OBTAIN SERVICE: Warranty service is available, WITH PROOF  
OF PURCHASE AND APPLICABLE MAINTENANCE RECORDS, through  
your local authorized service dealer. To locate the dealer in your area:  
In no event shall recovery of any kind be greater than the amount of the  
purchase price of the product sold. Alteration of safety features of the  
product shall void this warranty. You assume the risk and liability for  
loss, damage, or injury to you and your property and/or to others and  
their property arising out of the misuse or inability to use the product.  
In the U.S.A.:  
Check your Yellow Pages, or contact Cub Cadet LLC at P.O. Box 361131,  
Cleveland, Ohio 44136-0019, call 1-877-282- 8684  
This limited warranty shall not extend to anyone other than the original  
purchaser or to the person for whom it was purchased as a gift.  
In Canada:  
Contact MTD Products Limited, Kitchener, ON N2G 4J1, call 1-800-668-  
HOW LOCAL LAWS RELATE TO THIS WARRANTY: This limited warranty  
gives you specific legal rights, and you may also have other rights that  
vary in different jurisdictions.  
Without limiting the foregoing, this limited warranty does not provide  
coverage in the following cases:  
Cub Cadet LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019, Phone: 1-877-282-8684  
MTD Products Limited, Kitchener, ON N2G 4J1, Phone: 1-800-668-1238  
GDOC-100177 REV. A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Agri Fab Lawn Mower 45 0407 131 User Manual
Bolens Lawn Mower Series 544 User Manual
Dixon Lawn Mower 21 KAW 968999576 User Guide
Grizzly Lawn Sweeper T10042 User Guide
Hayter Mowers Lawn Mower 560F User Guide
Hubbell Lawn Mower SZ 18 User Guide
Sears Lawn Mower 917372852 User Guide
Snapper Lawn Mower 1613H User Guide
Snapper Lawn Mower 7800918 00 User Manual
Snapper Lawn Mower EZF5200M User Manual