Rear Seat Back Tray User’s Information
Removal
3. Adjust the rear seatback tray belt to secure it to
the center rear seat. Reinstall the headrest.
Check that the rear seatback tray is secure by
moving it forward or backward and right or left.
Retighten if necessary.
4. Remove the headrest from the center rear seat.
Tilt the rear center armrest forward and loosen the
rear seatback tray belt.
HEADREST
HEADREST
REAR SEAT
BACKTRAY BELT
REAR SEAT
BACKTRAY BELT
© 2006 American Honda Motor Co., Inc. - All Rights Reserved.
3
5. Remove the rear seatback tray belt, and remove
the rear seatback tray from the center rear seat.
6 Reinstall the headrest in the center rear seat.
HEADREST
push
REAR SEAT
BACKTRAY
KNOB
CENTER
REAR SEAT
CENTER
REAR SEAT
ARMREST
REAR SEAT
BACKTRAY BELT
4
© 2006 American Honda Motor Co., Inc. - All Rights Reserved.
NOTE
•
Avoid placing movable objects on the table.
•
Do not sit on the table or place heavy objects
on the table.
© 2006 American Honda Motor Co., Inc. - All Rights Reserved.
5
NOTE
•
You cannot fold the rear seat with the rear seatback tray installed because the rear seatback tray interferes
with the rear seat when folding. Remove the rear seatback tray before folding the rear seat.
CENTER CONSOLETYPE
CENTERTABLETYPE
REAR SEAT
BACKTRAY
REAR SEAT
BACKTRAY
CENTER
CONSOLE
CENTER
TABLE
REAR SEAT
REAR SEAT
6
© 2006 American Honda Motor Co., Inc. - All Rights Reserved.
NOTE
•
Be careful tilting the center rear seatback if the
vehicle is equipped with a rear shelf.
REAR SEAT
BACKTRAY
SHELF
© 2006 American Honda Motor Co., Inc. - All Rights Reserved.
7
08U32-SWA-1000-81
© 2006 American Honda Motor Co., Inc. - All Rights Reserved.
PrintedinJapan
|