HP Hewlett Packard DESKJET 1050 User Manual

HP Deskjet 1050 All-in-One series  
Contents  
1
2
1 How Do I?  
Learn how to use your HP All-in-One  
How Do I?  
3
 
Chapter 1  
4
How Do I?  
2 Get to know the HP All-in-One  
Printer parts  
1
2
3
4
5
6
7
Input tray  
Paper-width guide for the input tray  
Control panel  
Cartridge door  
Output tray  
Output tray extender (also referred to as the tray extender)  
Cartridges  
Printer parts  
5
   
Chapter 2  
Control panel features  
!
1
Power: Turns the product on or off. When the product is off, a minimal amount of power is still  
used. To completely remove power, turn off the product, then unplug the power cord.  
2
3
Cancel: Stops the current operation.  
Start Copy Black: Starts a black-and-white copy job. Increase the number of copies (up to  
10) by pressing the button multiple times. Acts as a resume button after resolving print  
problems.  
4
5
6
Start Copy Color: Starts a color copy job. Increase the number of copies (up to 10) by pressing  
the button multiple times. Acts as a resume button after resolving print problems.  
Attention light: Indicates that there is a paper jam, the printer is out of paper, or some event  
that requires your attention.  
Cartridge light: Indicates low ink or a print cartridge problem.  
6
Get to know the HP All-in-One  
 
Status Lights  
When the product is turned on, the on button light will be lit. When the product is  
processing a job, the on light will be blinking. Additional blinking lights signal errors that  
you can resolve. See below to learn about blinking lights and what to do.  
Behavior  
Solution  
Power light is blinking and attention light is on (not  
blinking)  
The output tray is closed, there is no  
paper, or there is a paper jam.  
media, or Clear a paper jam. Press  
Start Copy Black or Start Copy  
Color to resume.  
Power light is blinking, both cartridge lights are blinking, The cartridge door is open, or the  
and the attention light is on (not blinking)  
carriage is obstructed.  
If the cartridge door is open, close it.  
See Prepare the trays for more  
information. If the carriage is  
obstructed, open cartridge door and  
move the carriage to the right to clear  
the obstruction. Press Start Copy  
Black or Start Copy color to resume.  
information.  
One cartridge light is on (not blinking)  
An “on” cartridge light indicates that  
the corresponding cartridge still has  
the tape on, is not installed, or is low  
on ink.  
Remove the pink tape if it is still on the  
cartridge, insert a cartridge if one is  
missing, or replace the cartridge when  
print quality is no longer acceptable.  
For more information, see Replace the  
Both cartridge lights are on (not blinking)  
One cartridge light is blinking  
Both cartridges are low on ink.  
Replace both cartridges when print  
quality is no longer acceptable.  
A “blinking” cartridge light indicates  
that the corresponding cartridge is not  
installed correctly or is incompatible.  
If the cartridge is not installed  
correctly, reinsert the cartridge. If the  
cartridge is incompatible, replace it  
with a compatible cartridge.  
Both cartridge lights are blinking  
Both cartridges may still have the tape  
on, are missing, or are defective.  
Remove the pink tape from both  
cartridges if it is still on the cartridges,  
install the missing cartridges or  
replace the defective cartridges. See  
Status Lights  
7
 
Chapter 2  
(continued)  
Behavior  
Solution  
if only one cartridge is a defective.  
Both cartridge lights and attention light are blinking  
The cartridge carriage inside the  
printer has stalled.  
Open cartridge door and make sure  
the carriage is not obstructed, close  
door, and then press the Start Copy  
Black or Start Copy Color button to  
resume.  
Power light, both cartridge lights, and attention light are The printer is in an error state.  
blinking  
To exit the error state, reset the  
product.  
1. Turn off the product.  
2. Unplug the power cord.  
3. Wait a minute, then plug the  
power cord back in.  
4. Turn on the product.  
If the problem persists, contact  
8
Get to know the HP All-in-One  
3 Print  
Choose a print job to continue.  
Print documents  
To print from a software application  
1. Make sure the output tray is open.  
2. Make sure you have paper loaded in the input tray.  
3. From your software application, click the Print button.  
4. Make sure the product is the selected printer.  
5. Click the button that opens the Properties dialog box.  
Depending on your software application, this button might be called Properties,  
Options, Printer Setup, Printer, or Preferences.  
6. Select the appropriate options.  
On Layout tab select Portrait or Landscape orientation.  
On Paper/Quality tab select the appropriate paper type and print quality from the  
Media drop-down list.  
Click Advanced to select the appropriate paper size from the Paper/Output list.  
7. Click OK to close the Properties dialog box.  
8. Click Print or OK to begin printing.  
Print documents  
9
   
Chapter 3  
NOTE: You can print your document on both sides of the paper, instead of just one  
side. Click on the Advanced button on the Paper/Quality or Layout tab. From the  
Pages to Print drop-down menu select Print Odd Pages Only. Click OK to print.  
After the odd numbered pages of the document have been printed, remove the  
document from the output tray. Reload the paper in the input tray with the blank side  
facing up. Return to the Pages to Print drop-down menu and then select Print Even  
Pages Only. Click OK to print.  
Print photos  
To print a photo on photo paper  
1. Make sure the output tray is open.  
2. Remove all paper from the input tray, and then load the photo paper print side up.  
NOTE: If the photo paper you are using has perforated tabs, load photo paper  
so that tabs are on top.  
3. On the File menu in your software application, click Print.  
4. Make sure the product is the selected printer.  
5. Click the button that opens the Properties dialog box.  
Depending on your software application, this button might be called Properties,  
Options, Printer Setup, Printer, or Preferences.  
6. Click the Paper/Quality tab.  
7. Select the appropriate options.  
On Layout tab select Portrait or Landscape orientation.  
On Paper/Quality tab select the appropriate paper type and print quality from the  
Media drop-down list.  
Click Advanced to select the appropriate paper size from the Paper/Output list.  
NOTE: For maximum dpi resolution, go to the Paper/Quality tab and select  
Photo Paper, Best Quality from the Media drop-down list. Make sure you are  
printing in color. Then go to the Advanced tab and select Yes from the Print in  
Max DPI drop-down list. For more information, see Print using the maximum  
dpi.  
8. Click OK to return to the Properties dialog box.  
9. Click OK, and then click Print or OK in the Print dialog box.  
10  
Print  
 
NOTE: Do not leave unused photo paper in the input tray. The paper might start to  
curl, which could reduce the quality of your printout. Photo paper should be flat before  
printing.  
Print envelopes  
You can load one or more envelopes into the input tray of the HP All-in-One. Do not use  
shiny or embossed envelopes or envelopes that have clasps or windows.  
NOTE: For specific details on how to format text for printing on envelopes, consult  
the help files in your word processing software. For best results, consider using a label  
for the return address on envelopes.  
To print envelopes  
1. Make sure the output tray is open.  
2. Slide the paper guide all the way to the left.  
3. Place the envelopes in the right side of the tray. The side to be printed on should face  
up. The flap should be on the left side.  
4. Push the envelopes into the printer until they stop.  
5. Slide the paper guide firmly against the edge of the envelopes.  
6. Click the button that opens the Properties dialog box.  
Depending on your software application, this button might be called Properties,  
Options, Printer Setup, Printer, or Preferences.  
7. Select the appropriate options.  
On Paper/Quality tab select a Plain paper type.  
Click the Advanced button, and select the appropriate envelope size from the  
Paper Size drop down menu.  
8. Click OK, and then click Print or OK in the Print dialog box.  
Tips for print success  
To successfully print, the HP cartridges should be functioning properly with sufficient ink,  
the paper should be loaded correctly, and the product should have the appropriate  
settings.  
Tips for print success  
11  
   
Chapter 3  
Cartridge tips  
Use genuine HP ink cartridges.  
Install both the black and tri-color cartridges correctly.  
For more information, see Replace the cartridges.  
Check the estimated ink levels in the cartridges to make sure there is sufficient ink.  
For more information, see Check the estimated ink levels.  
For more information, see Improve print quality.  
Paper loading tips  
Load a stack of paper (not just one page). All of the paper in the stack should be the  
same size and type to avoid a paper jam.  
Load paper with side to be printed on facing up.  
Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn.  
Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure  
the paper-width guide does not bend the paper in the input tray.  
For more information, see Load media.  
Printer settings tips  
On the Paper/Quality tab of the print driver, select the appropriate paper type and  
quality from the Media drop down menu.  
Click the Advanced button, and select the appropriate Paper Size from the Paper/  
Output drop-down menu.  
Click the HP All-in-One desktop icon to open the Printer Software.  
NOTE: You can also access the Printer Software by clicking Start > Programs  
> HP > HP Deskjet 1050 J410 > HP Deskjet 1050 J410  
Notes  
Genuine HP ink cartridges are designed and tested with HP printers and papers to  
help you easily produce great results, time after time.  
NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product  
service or repairs required as a result of using a non-HP supply will not be covered  
under warranty.  
If you believe you purchased genuine HP ink cartridges, go to:  
Ink level warnings and indicators provide estimates for planning purposes only.  
NOTE: When you receive a low-ink warning message, consider having a  
replacement cartridge available to avoid possible printing delays. You do not need  
to replace the cartridges until print quality becomes unacceptable.  
Software settings selected in the print driver only apply to printing, they do not apply  
to copying or scanning.  
12  
Print  
You can print your document on both sides of the paper, instead of just one side.  
NOTE: Click the Advanced button on the Paper/Quality or Layout tab. From  
the Pages to Print drop-down menu select Print Odd Pages Only. Click OK to  
print. After the odd numbered pages of the document have been printed, remove  
the document from the output tray. Reload the paper in the input tray with the  
blank side facing up. Return to the Pages to Print drop-down menu and then  
select Print Even Pages Only. Click OK to print.  
Print using black ink only  
NOTE: If you want to print a black and white document using black ink only, click  
the Advanced button. From the Print in Grayscale drop-down menu select  
Black Ink Only, then click the OK button. If you see Black and White as an option  
on the Paper/Quality tab or the Layout tab, select it.  
Print using the maximum dpi  
Use maximum dots per inch (dpi) mode to print high-quality, sharp images on photo  
paper.  
See technical specifications for the print resolution of the maximum dpi mode.  
Printing in maximum dpi takes longer than printing with other settings and requires a large  
amount of disk space.  
To print in Maximum dpi mode  
1. Make sure you have photo paper loaded in the input tray.  
2. On the File menu in your software application, click Print.  
3. Make sure the product is the selected printer.  
4. Click the button that opens the Properties dialog box.  
Depending on your software application, this button might be called Properties,  
Options, Printer Setup, Printer, or Preferences.  
5. Click the Paper/Quality tab.  
6. In the Media drop-down list, click Photo Paper, Best Quality.  
NOTE: Photo Paper, Best Quality must be selected from the Media drop-down  
list on the Paper/Quality tab to enable printing in maximum DPI.  
7. Click the Advanced button.  
8. In the Printer Features area, select Yes from the Print in Max DPI drop-down list.  
9. Select Paper Size from Paper/Output drop-down menu.  
10. Click OK to close the advanced options.  
11. Confirm Orientation on Layout tab, then click OK to print.  
Print using the maximum dpi  
13  
 
Chapter 3  
14  
Print  
4 Paper basics  
You can load many different types and sizes of paper in the HP All-in-One, including letter  
or A4 paper, photo paper, transparencies, and envelopes.  
This section contains the following topics:  
Recommended papers for printing  
If you want the best print quality, HP recommends using HP papers that are specifically  
designed for the type of project you are printing.  
Depending on your country/region, some of these papers might not be available.  
ColorLok  
HP recommends plain papers with the ColorLok logo for printing and copying of everyday  
documents. All papers with the ColorLok logo are independently tested to meet high  
standards of reliability and print quality, and produce documents with crisp, vivid color,  
bolder blacks, and dry faster than ordinary plain papers. Look for papers with the ColorLok  
logo in a variety of weights and sizes from major paper manufacturers.  
HP Advanced Photo Paper  
This thick photo paper features an instant-dry finish for easy handling without smudging.  
It resists water, smears, fingerprints, and humidity. Your prints have a look and feel  
comparable to a store-processed photo. It is available in several sizes, including A4, 8.5  
x 11 inch, 10 x 15 cm (4 x 6 inch) (with or without tabs), 13 x 18 cm (5 x 7 inch), and two  
finishes - glossy or soft gloss (satin matte). It is acid-free for longer lasting documents.  
HP Everyday Photo Paper  
Print colorful, everyday snapshots at a low cost, using paper designed for casual photo  
printing. This affordable, photo paper dries quickly for easy handling. Get sharp, crisp  
images when you use this paper with any inkjet printer. It is available in semi-gloss finish  
in several sizes, including A4, 8.5 x 11 inch, and 10 x 15 cm (4 x 6 inch) (with or without  
tabs). For longer-lasting photos, it is acid-free.  
Recommended papers for printing  
15  
 
Chapter 4  
HP Brochure Paper or HP Superior Inkjet Paper  
These papers are glossy-coated or matte-coated on both sides for two-sided use. They  
are the perfect choice for near-photographic reproductions and business graphics for  
report covers, special presentations, brochures, mailers, and calendars.  
HP Premium Presentation Paper or HP Professional Paper  
These papers are heavy two-sided matte papers perfect for presentation, proposals,  
reports, and newsletters. They are heavyweight for an impressive look and feel.  
HP Bright White Inkjet Paper  
HP Bright White Inkjet Paper delivers high-contrast colors and sharp text. It is opaque  
enough for two-sided color usage with no show-through, which makes it ideal for  
newsletters, reports, and flyers. It features ColorLok Technology for less smearing, bolder  
blacks, and vivid colors.  
HP Printing Paper  
HP Printing Paper is a high-quality multifunction paper. It produces documents that look  
and feel more substantial than documents printed on standard multipurpose or copy  
paper. It features ColorLok Technology for less smearing, bolder blacks, and vivid colors.  
It is acid-free for longer lasting documents.  
HP Office Paper  
HP Office Paper is a high-quality multifunction paper. It is suitable for copies, drafts,  
memos, and other everyday documents. It features ColorLok Technology for less  
smearing, bolder blacks, and vivid colors. It is acid-free for longer lasting documents.  
HP Iron-On Transfers  
HP Iron-on Transfers (for color fabrics or for light or white fabrics) are the ideal solution  
for creating custom T-shirts from your digital photos.  
HP Premium Inkjet Transparency Film  
HP Premium Inkjet Transparency Film make your color presentations vivid and even more  
impressive. This film is easy to use and handle and dries quickly without smudging.  
HP Photo Value Pack  
HP Photo Value Packs conveniently package original HP cartridges and HP Advanced  
Photo Paper to save you time and take the guesswork out of printing affordable  
professional photos with your HP All-in-One. Original HP inks and HP Advanced Photo  
Paper have been designed to work together so your photos are long lasting and vivid,  
print after print. Great for printing out an entire vacation’s worth of photos or multiple prints  
to share.  
NOTE: At this time, some portions of the HP Web site are available in English only.  
To order HP papers and other supplies, go to www.hp.com/buy/supplies. If prompted,  
choose your country/region, follow the prompts to select your product, and then click one  
of the shopping links on the page.  
16  
Paper basics  
Load media  
Select a paper size to continue.  
Load full-size paper  
a. Raise the input tray  
Raise the input tray.  
b. Lower the output tray  
Lower the output tray and pull out the tray extender.  
Load media  
17  
 
Chapter 4  
c. Slide paper-width guide to the left  
Slide paper-width guide to the left.  
d. Load paper.  
Insert stack of paper into input tray with short edge forward and print side up.  
Slide stack of paper down until it stops.  
Slide paper-width guide to the right until it stops at edge of paper.  
18  
Paper basics  
Load small-size paper  
a. Raise the input tray  
Raise the input tray.  
b. Lower the output tray  
Lower the output tray and pull out the tray extender.  
Load media  
19  
Chapter 4  
c. Slide paper-width guide to the left.  
Slide paper-width guide to the left.  
d. Load paper.  
Insert stack of photo paper with short edge down and print side up.  
Slide stack of paper forward until it stops.  
NOTE: If the photo paper you are using has perforated tabs, load photo  
paper so that tabs are on top.  
Slide paper-width guide to the right until it stops at edge of paper.  
20  
Paper basics  
Load envelopes  
a. Raise the input tray  
Raise the input tray.  
b. Lower the output tray  
Lower the output tray and pull out the tray extender.  
c. Slide paper-width guide to the left.  
Slide paper-width guide to the left.  
Load media  
21  
Chapter 4  
Remove all paper from the main input tray.  
d. Load envelopes.  
Insert one or more envelopes into far-right side of the input tray. The side to  
be printed on should face up. The flap should be on the left side and facing  
down.  
Slide stack of envelopes down until it stops.  
Slide paper-width guide to the right against stack of envelopes until it stops.  
22  
Paper basics  
5 Copy and scan  
Copy documents or photos  
NOTE: All documents are copied in normal quality print mode. You cannot change  
the print mode quality when copying.  
Do one of the following:  
1-sided original to 1-sided copy  
a. Load paper.  
Load either small photo paper or full-size paper in the input tray.  
b. Load original.  
Lift lid on product.  
Copy documents or photos  
23  
   
Chapter 5  
Load original print side down on right front corner of glass.  
Close lid.  
c. Start copy.  
Press either Start Copy Black or Start Copy Color. Increase the number of  
copies by pressing the button multiple times.  
Scan to a computer  
NOTE: To scan to a computer, the HP All-in-One and computer must be connected  
and turned on.  
24  
Copy and scan  
 
To scan to a computer:  
Single page scan  
a. Load paper.  
Load either small photo paper or full-size paper in the input tray.  
b. Load original.  
Lift lid on product.  
Load original print side down on right front corner of glass.  
Scan to a computer  
25  
Chapter 5  
Close lid.  
c. Start scan.  
Start the Scan job using the Printer Software. Click the HP All-in-One desktop  
icon to open the Printer Software.  
NOTE: You can also access the Printer Software by clicking Start >  
Programs > HP > HP Deskjet 1050 J410 > HP Deskjet 1050 J410  
Select Scanner Actions. You will see scan options that you can select  
onscreen.  
Tips for copy and scan success  
Load your original print side down on the right front corner of the glass.  
Clean the scanner glass and make sure that there are no foreign materials adhering  
to it.  
26  
Copy and scan  
 
6 Work with cartridges  
Check the estimated ink levels  
You can easily check the ink supply level to determine how soon you might need to  
replace a cartridge. The ink supply level shows an estimate of the amount of ink remaining  
in the cartridges.  
To check the ink levels from the Printer Software  
1. Click the HP All-in-One desktop icon to open the Printer Software.  
NOTE: You can also access the Printer Software by clicking Start > Programs  
> HP > HP Deskjet 1050 J410 > HP Deskjet 1050 J410  
2. In the Printer Software, click Printer Actions and then click Maintenance Tasks to  
access the Printer Toolbox.  
3. Click the Estimated Ink Level tab.  
NOTE: If you have installed a refilled or remanufactured cartridge, or a cartridge that  
has been used in another printer, the ink level indicator might be inaccurate or  
unavailable.  
NOTE: Ink level warnings and indicators provide estimates for planning purposes  
only. When you receive a low-ink warning message, consider having a replacement  
cartridge available to avoid possible printing delays. You do not have to replace the  
cartridges until the print quality is unacceptable.  
NOTE: Ink from the cartridges is used in the printing process in a number of different  
ways, including in the initialization process, which prepares the product and cartridges  
for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing  
smoothly. In addition, some residual ink is left in the cartridge after it is used. For more  
information, see www.hp.com/go/inkusage.  
Check the estimated ink levels  
27  
   
Chapter 6  
Order ink supplies  
Before ordering cartridges, locate the correct cartridge number.  
Locate the cartridge number on the printer  
The cartridge number is located inside the cartridge door.  
Product No.  
HP Ink  
xxxxxx  
xx  
Cartridge  
Model No. xxxxx  
Locate the cartridge number in the Printer Software  
1. Click the HP All-in-One desktop icon to open the Printer Software.  
NOTE: You can also access the Printer Software by clicking Start > Programs  
> HP > HP Deskjet 1050 J410 > HP Deskjet 1050 J410  
2. In the Printer Software, click Shop For Supplies Online. The correct cartridge  
number will be automatically displayed when you use this link.  
To order genuine HP supplies for the HP All-in-One, go to www.hp.com/buy/supplies. If  
prompted, choose your country/region, follow the prompts to select your product, and  
then click one of the shopping links on the page.  
NOTE: Ordering cartridges online is not supported in all countries/regions. If it is not  
available in your country/region, you may still view supplies information and print a  
list for reference when shopping at a local HP reseller.  
Related topics  
Choose the right cartridges  
HP recommends that you use original HP cartridges. Original HP cartridges are designed  
and tested with HP printers to help you easily produce great results, time after time.  
Related topics  
28  
Work with cartridges  
   
Replace the cartridges  
To replace the cartridges  
1. Check power.  
2. Load paper.  
3. Remove cartridge.  
a. Open cartridge door.  
Wait for print carriage to move to center of the product.  
b. Press down to release cartridge, then remove it from slot.  
Replace the cartridges  
29  
 
Chapter 6  
4. Insert new cartridge.  
a. Remove cartridge from packaging.  
b. Remove plastic tape using pink pull tab.  
c. Slide cartridge into slot until it clicks into place.  
30  
Work with cartridges  
d. Close cartridge door.  
5. Align cartridges.  
Related topics  
Use single-cartridge mode  
Use the single-cartridge mode to operate the HP All-in-One with only one print cartridge.  
The single-cartridge mode is initiated when a print cartridge is removed from the print  
cartridge carriage. During single-cartridge mode, the product can only print jobs from the  
computer.  
NOTE: When the HP All-in-One operates in single-cartridge mode, a message is  
displayed on screen. If the message is displayed and two print cartridges are installed  
in the product, verify that the protective piece of plastic tape has been removed from  
each print cartridge. When plastic tape covers the print cartridge contacts, the product  
cannot detect that the print cartridge is installed.  
Exit single-cartridge mode  
Install two print cartridges in the HP All-in-One to exit single-cartridge mode.  
Related topics  
Cartridge warranty information  
The HP cartridge warranty is applicable when the product is used in its designated HP  
printing device. This warranty does not cover HP ink products that have been refilled,  
remanufactured, refurbished, misused, or tampered with.  
Cartridge warranty information  
31  
   
Chapter 6  
During the warranty period the product is covered as long as the HP ink is not depleted  
and the end of warranty date has not been reached. The end of warranty date, in YYYY/  
MM/DD format, may be found on the product as indicated:  
For a copy of the HP Limited Warranty Statement, see the printed documentation that  
came with the product.  
32  
Work with cartridges  
7 Solve a problem  
This section contains the following topics:  
Improve print quality  
1. Make sure you are using genuine HP cartridges.  
2. Check the Printer Software settings to make sure you have selected the appropriate  
paper type and print quality from the Media drop-down list.  
3. Check the estimated ink levels to determine if the cartridges are low on ink. For more  
information, see Check the estimated ink levels. If the print cartridges are low on ink  
consider replacing them.  
4. Align the printer cartridges  
To align the cartridges from the Printer Software  
NOTE: Aligning the cartridges ensures high-quality output. The HP All-in-One  
prompts you to align the cartridges every time you install a new cartridge. If you  
remove and reinstall the same print cartridge, the HP All-in-One will not prompt  
you to align the print cartridges. The HP All-in-One remembers the alignment  
values for that print cartridge, so you do not need to realign the print cartridges.  
a. Load letter or A4 unused plain white paper into the input tray.  
b. In the Printer Software, click Printer Actions and then click Maintenence  
Tasks to access the Printer Toolbox.  
c. The Printer Toolbox appears.  
d. Click the Device Services tab.  
e. Click Align Ink Cartridges tab. The product prints an alignment sheet.  
f. Load the cartridge alignment sheet print side down on the right front corner of the  
glass.  
g. Press the Start Copy Black button. The product aligns the cartridges. Recycle  
or discard the cartridge alignment sheet.  
5. Print a diagnostics page if the cartridges are not low on ink.  
To print a diagnostics page  
a. Load letter or A4 unused plain white paper into the input tray.  
b. In the Printer Software, click Printer Actions and then click Maintenence  
Tasks to access the Printer Toolbox.  
c. Click Print Diagnostic Information to print a diagnostics page. Review the blue,  
magenta, yellow, and black boxes on the diagnostics page. If you are seeing  
Improve print quality  
33  
   
Chapter 7  
streaks in the color and black boxes, or no ink in portions of the boxes, then  
automatically clean the cartridges  
6. Clean the print cartridges automatically, if the diagnostic page shows steaks or  
missing portions of the color and black boxes.  
To clean the cartridges automatically  
a. Load letter or A4 unused plain white paper into the input tray.  
b. In the Printer Software, click Printer Actions and then click Maintenence  
Tasks to access the Printer Toolbox.  
c. Click Clean Ink Cartridges. Follow the onscreen instructions.  
If the above solutions do not resolve the problem, click here for more online  
34  
Solve a problem  
Clear a paper jam  
Clear a paper jam.  
To clear a paper jam  
1. Press the cancel button to try to clear the jam automatically. If this does not work, the  
paper jam will need to be cleared manually.  
2. Locate the paper jam  
Input tray  
If the paper jam is located near the back input tray, pull the paper gently out of the  
input tray.  
Output tray  
If the paper jam is located near the front output tray, pull the paper gently out of  
the output tray.  
You may need to open the carriage door and slide the print carriage to the right  
to access the paper jam.  
Clear a paper jam  
35  
 
Chapter 7  
Inside of printer  
If the paper jam is located inside the printer, open the cleanout door located on  
the bottom of the printer. Press tabs on both sides of the cleanout door.  
Remove jammed paper.  
Close the cleanout door. Gently push the door towards the printer until both  
latches snap into place.  
3. Press the Start Copy Black or Start Copy Color button on the control panel to  
continue the current job.  
If the above solutions do not resolve the problem, click here for more online  
Prevent paper jams  
Do not overfill the input tray.  
Remove printed papers from the output tray frequently.  
Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn.  
Do not combine different paper types and paper sizes in the input tray; the entire stack  
of paper in the input tray must be the same size and type.  
Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure  
the paper-width guide does not bend the paper in the input tray.  
Do not force paper too far forward in the input tray.  
36  
Solve a problem  
If the above solutions do not resolve the problem, click here for more online  
Unable to print  
Make sure that the printer is turned on and that there is paper in the tray. If you are still  
unable to print, try the following in order:  
1. Check for error messages and resolve.  
2. Disconnect and reconnect the USB cable.  
3. Verify that the product is not paused or offline.  
To verify that the product is not paused or offline  
NOTE: HP provides a Printer Diagnostic Utility that can automatically fix this  
issue.  
Click here to go online for more information. Otherwise, follow the steps  
below.  
a. Depending upon your operating system, do one of the following:  
Windows 7: From the Windows Start menu, click Devices and Printers.  
Windows Vista: From the Windows Start menu, click Control Panel, and  
then click Printers.  
Windows XP: From the Windows Start menu, click Control Panel, and then  
click Printers and Faxes.  
b. Double-click the icon for your product to open the print queue.  
c. On the Printer menu, make sure there are no check marks next to Pause  
Printing or Use Printer Offline.  
d. If you made any changes, try to print again.  
4. Verify that the product is set as the default printer.  
To verify that the product is set as the default printer  
NOTE: HP provides a Printer Diagnostic Utility that can automatically fix this  
issue.  
Click here to go online for more information. Otherwise, follow the steps  
below.  
a. Depending upon your operating system, do one of the following:  
Windows 7: From the Windows Start menu, click Devices and Printers.  
Windows Vista: From the Windows Start menu, click Control Panel, and  
then click Printers.  
Windows XP: From the Windows Start menu, click Control Panel, and then  
click Printers and Faxes.  
b. Make sure the correct product is set as the default printer.  
The default printer has a check mark in a black or green circle next to it.  
Unable to print  
37  
 
Chapter 7  
c. If the wrong product is set as the default printer, right-click the correct product and  
select Set as Default Printer.  
d. Try using your product again.  
5. Restart the print spooler.  
To restart the print spooler  
NOTE: HP provides a Printer Diagnostic Utility that can automatically fix this  
issue.  
Click here to go online for more information. Otherwise, follow the steps  
below.  
a. Depending upon your operating system, do one of the following:  
Windows 7  
From the Windows Start menu, click Control Panel, System and Security,  
and then Administrative Tools.  
Double-click Services.  
Right-click the Print Spooler, and then click Properties.  
On the General tab, next to Startup type, make sure that Automatic is  
selected.  
If the service is not already running, under Service status, click Start, and  
then click OK.  
Windows Vista  
From the Windows Start menu, click Control Panel, System and  
Maintenance, Administrative Tools.  
Double-click Services.  
Right-click the Print Spooler service, and then click Properties.  
On the General tab, next to Startup type, make sure that Automatic is  
selected.  
If the service is not already running, under Service status, click Start, and  
then click OK.  
Windows XP  
From the Windows Start menu, right click My Computer.  
Click Manage, and then click Services and Applications.  
Double-click Services, and then select Print Spooler.  
Right-click Print Spooler, and click Restart to restart the service.  
b. Make sure the correct product is set as the default printer.  
The default printer has a check mark in a black or green circle next to it.  
c. If the wrong product is set as the default printer, right-click the correct product and  
select Set as Default Printer.  
d. Try using your product again.  
38  
Solve a problem  
6. Restart the computer.  
7. Clear the print queue  
To clear the print queue  
NOTE: HP provides a Printer Diagnostic Utility that can automatically fix this  
issue.  
Click here to go online for more information. Otherwise, follow the steps  
below.  
a. Depending upon your operating system, do one of the following:  
Windows 7: From the Windows Start menu, click Devices and Printers.  
Windows Vista: From the Windows Start menu, click Control Panel, and  
then click Printers.  
Windows XP: From the Windows Start menu, click Control Panel, and then  
click Printers and Faxes.  
b. Double-click the icon for your product to open the print queue.  
c. On the Printer menu, click Cancel all documents or Purge Print Document,  
and then click Yes to confirm.  
d. If there are still documents in the queue, restart the computer and try printing  
again after the computer has restarted.  
e. Check the print queue again to make sure it is clear, and then try to print again.  
If the print queue is not clear, or if it is clear but jobs are still failing to print, proceed  
to the next solution.  
If the above solutions do not resolve the problem, click here for more online  
Clear the print carriage  
Remove any objects, such as paper, that are blocking the print carriage.  
NOTE: Do not use any tools or other devices to remove jammed paper. Always use  
caution when removing jammed paper from inside the product.  
Identify a defective cartridge  
If both the tri-color and black cartridge lights are blinking, and the power light is on, both  
cartridges may still have tape on, or are missing. First make sure that the pink tape has  
been removed from both cartridges, and that both cartridges are installed. If both cartridge  
Identify a defective cartridge  
39  
   
Chapter 7  
lights are still blinking, then one or both cartridges may be defective. To determine if one  
cartridge is defective do the following:  
1. Remove black cartridge.  
2. Close cartridge door.  
3. If the On light blinks, the tri-color cartridge should be replaced. If the On light does  
not blink, replace the black cartridge.  
Prepare the trays  
Open output tray  
Output tray must be open to begin printing.  
Close cartridge door  
Cartridge door must be closed to begin printing.  
Resolve copy and scan issues  
HP support  
40  
Solve a problem  
   
Register the product  
By taking just a few quick minutes to register, you can enjoy quicker service, more efficient  
support, and product support alerts. If you did not register your printer while installing the  
software, you can register now at http://www.register.hp.com.  
Support process  
If you have a problem, follow these steps:  
1. Check the documentation that came with the product.  
2. Visit the HP online support Web site at www.hp.com/support. HP online support is  
available to all HP customers. It is the fastest source for up-to-date product  
information and expert assistance and includes the following features:  
Fast access to qualified online support specialists  
Software and driver updates for the product  
Valuable product and troubleshooting information for common problems  
Proactive product updates, support alerts, and HP newsgrams that are available  
when you register the product  
3. Call HP support. Support options and availability vary by product, country/region, and  
language.  
HP support by phone  
Phone support options and availability vary by product, country/region, and language.  
This section contains the following topics:  
Phone support period  
One year of phone support is available in North America, Asia Pacific, and Latin America  
(including Mexico). To determine the duration of phone support in Europe, the Middle  
East, and Africa, go to www.hp.com/support. Standard phone company charges apply.  
HP support  
41  
             
Chapter 7  
Placing a call  
Call HP support while you are in front of the computer and the product. Be prepared to  
provide the following information:  
Product name (HP Deskjet 1050 All-in-One series)  
Model number (located inside the cartridge door)  
Product No.  
HP Ink  
xxxxxx  
xx  
Cartridge  
Model No. xxxxx  
Serial number (located on the back or bottom of the product)  
Messages that appear when the situation occurs  
Answers to these questions:  
Has this situation happened before?  
Can you re-create it?  
Did you add any new hardware or software to your computer at about the time  
that this situation began?  
Did anything else occur prior to this situation (such as a thunderstorm, product  
was moved, etc.)?  
Support phone numbers  
For the most current HP list of telephone support numbers and call costs information, see  
After the phone support period  
After the phone support period, help is available from HP at an additional cost. Help may  
also be available at the HP online support Web site: www.hp.com/support. Contact your  
HP dealer or call the support phone number for your country/region to learn more about  
support options.  
Additional warranty options  
Extended service plans are available for the HP All-in-One at additional costs. Go to  
www.hp.com/support, select your country/region and language, then explore the services  
and warranty area for information about the extended service plans.  
42  
Solve a problem  
           
8 Technical information  
The technical specifications and international regulatory information for the HP All-in-One are  
provided in this section.  
For additional specifications, see the printed documentation that came with the HP All-in-One.  
This section contains the following topics:  
Notice  
Hewlett-Packard Company notices  
The information contained in this document is subject to change without notice.  
All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission  
of Hewlett-Packard, except as allowed under copyright laws. The only warranties for HP products and services are set forth  
in the express warranty statements accompanying such products and services. Nothing herein should be construed as  
constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.  
© 2009 Hewlett-Packard Development Company, L.P.  
Microsoft, Windows, Windows XP, and Windows Vista are U.S. registered trademarks of Microsoft Corporation.  
Windows 7 is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other  
countries.  
Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and  
other countries.  
Specifications  
Technical specifications for the HP All-in-One are provided in this section. For complete product  
specifications, see the Product Data Sheet at www.hp.com/support.  
System requirements  
For information about future operating system releases and support, visit the HP online support Web  
site at www.hp.com/support.  
Environmental specifications  
Recommended operating temperature range: 15 ºC to 32 ºC (59 ºF to 90 ºF)  
Allowable operating temperature range: 5 ºC to 40 ºC (41 ºF to 104 ºF)  
Humidity: 15% to 80% RH non-condensing; 28 ºC maximum dewpoint  
Non-operating (Storage) temperature range: –40 ºC to 60 ºC (–40 ºF to 140 ºF)  
In the presence of high electromagnetic fields, it is possible the output from the HP All-in-One  
may be slightly distorted  
HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize  
injected noise due to potential high electromagnetic fields  
Input tray capacity  
Plain paper sheets (80 g/m2 [20lb]): Up to 50  
Envelopes: Up to 5  
Index cards: Up to 20  
Photo paper sheets: Up to 20  
Output tray capacity  
Plain paper sheets (80 g/m2 [20lb]): Up to 30  
Specifications  
43  
         
Chapter 8  
Envelopes: Up to 5  
Index cards: Up to 10  
Photo paper sheets: Up to 10  
Paper size  
For a complete list of supported media sizes, see the printer software.  
Paper weights  
Plain Paper: 64 to 90 g/m² (16 to 24 lb)  
Envelopes: 75 to 90 g/m² (20 to 24 lb)  
Cards: Up to 200 g/m² (110-lb index maximum)  
Photo Paper: Up to 280 g/m² (75 lb)  
Print specifications  
Print speeds vary according to the complexity of the document  
Method: drop-on-demand thermal inkjet  
Language: PCL3 GUI  
Copy specifications  
Digital image processing  
Copy speeds vary according to the complexity of the document and model  
Scan specifications  
Resolution: up to 1200 x 1200 ppi optical  
For more information about ppi resolution, see the scanner software.  
Color: 24-bit color, 8-bit grayscale (256 levels of gray)  
Maximum scan size from glass: 21.6 x 29.7 cm (8.5 x 11.7 inches)  
Print resolution  
Draft mode  
Color Input/Black Render: 300x300dpi  
Output (Black/Color): Automatic  
Normal mode  
Color Input/Black Render: 600x300dpi  
Output (Black/Color): Automatic  
Plain-Best mode  
Color Input/Black Render: 600x600dpi  
Output: 600x1200dpi (Black), Automatic (Color)  
Photo-Best mode  
Color Input/Black Render: 600x600dpi  
Output (Black/Color): Automatic  
Max DPI mode  
Color Input/Black Render: 1200x1200dpi  
Output: Automatic (Black), 4800x1200 optimized dpi (Color)  
44  
Technical information  
     
Power specifications  
0957-2286  
Input voltage: 100-240Vac (+/- 10%)  
Input frequency: 50/60 Hz (+/- 3Hz)  
0957-2290  
Input voltage: 200-240Vac (+/- 10%)  
Input frequency: 50/60 Hz (+/- 3Hz)  
NOTE: Use only with the power adapter supplied by HP.  
Cartridge yield  
Visit www.hp.com/go/learnaboutsupplies for more information on estimated cartridge yields.  
Acoustic information  
If you have Internet access, you can get acoustic information from the HP Web site. Go to:  
Environmental product stewardship program  
Hewlett-Packard is committed to providing quality products in an environmentally sound manner.  
Design for recycling has been incorporated into this product. The number of materials has been kept  
to a minimum while ensuring proper functionality and reliability. Dissimilar materials have been  
designed to separate easily. Fasteners and other connections are easy to locate, access, and  
remove using common tools. High priority parts have been designed to access quickly for efficient  
disassembly and repair.  
For more information, visit HP’s Commitment to the Environment Web site at:  
This section contains the following topics:  
Eco-Tips  
HP is committed to helping customers reduce their environmental footprint. HP has provided the  
Eco-Tips below to help you focus on ways to assess and reduce the impact of your printing choices.  
In addition to specific features in this product, please visit the HP Eco Solutions web site for more  
information on HP’s environmental initiatives.  
Your product's Eco features  
Energy Savings information: To determine the ENERGY STAR® qualification status for this  
product, see www.hp.com/go/energystar.  
Recycled Materials: For more information regarding recycling of HP products, please visit:  
Environmental product stewardship program  
45  
     
Chapter 8  
Paper use  
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.  
Plastics  
Plastic parts over 25 grams are marked according to international standards that enhance the ability  
to identify plastics for recycling purposes at the end of product life.  
Material safety data sheets  
Material safety data sheets (MSDS) can be obtained from the HP Web site at:  
Recycling program  
HP offers an increasing number of product return and recycling programs in many countries/regions,  
and partners with some of the largest electronic recycling centers throughout the world. HP  
conserves resources by reselling some of its most popular products. For more information regarding  
recycling of HP products, please visit:  
HP inkjet supplies recycling program  
HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is  
available in many countries/regions, and lets you recycle used print cartridges and ink cartridges  
free of charge. For more information, go to the following Web site:  
Power consumption  
Hewlett-Packard printing and imaging equipment marked with the ENERGY STAR® logo is qualified  
to the U.S. Environmental Protection Agency’s ENERGY STAR specifications for imaging  
equipment. The following mark will appear on ENERGY STAR qualified imaging products:  
Additional ENERGY STAR qualified imaging product model information is listed at: www.hp.com/  
46  
Technical information  
             
Disposal of waste equipment by users in private households in the European Union  
Disposal of Waste Equipment by Users in Private Households in the European Union  
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste  
equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment  
at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where  
you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.  
Évacuation des équipements usagés par les utilisateurs dans les foyers privés au sein de l'Union européenne  
La présence de ce symbole sur le produit ou sur son emballage indique que vous ne pouvez pas vous débarrasser de ce produit de la même façon que vos déchets courants.  
Au contraire, vous êtes responsable de l'évacuation de vos équipements usagés et, à cet effet, vous êtes tenu de les remettre à un point de collecte agréé pour le recyclage des  
équipements électriques et électroniques usagés. Le tri, l'évacuation et le recyclage séparés de vos équipements usagés permettent de préserver les ressources naturelles et de s'assurer  
que ces équipements sont recyclés dans le respect de la santé humaine et de l'environnement. Pour plus d'informations sur les lieux de collecte des équipements usagés, veuillez contacter  
votre mairie, votre service de traitement des déchets ménagers ou le magasin où vous avez acheté le produit.  
Entsorgung von Elektrogeräten durch Benutzer in privaten Haushalten in der EU  
Dieses Symbol auf dem Produkt oder dessen Verpackung gibt an, dass das Produkt nicht zusammen mit dem Restmüll entsorgt werden darf. Es obliegt daher Ihrer Verantwortung, das  
Gerät an einer entsprechenden Stelle für die Entsorgung oder Wiederverwertung von Elektrogeräten aller Art abzugeben (z.B. ein Wertstoffhof). Die separate Sammlung und das  
Recyceln Ihrer alten Elektrogeräte zum Zeitpunkt ihrer Entsorgung trägt zum Schutz der Umwelt bei und gewährleistet, dass sie auf eine Art und Weise recycelt werden, die keine  
Gefährdung für die Gesundheit des Menschen und der Umwelt darstellt. Weitere Informationen darüber, wo Sie alte Elektrogeräte zum Recyceln abgeben können, erhalten Sie bei  
den örtlichen Behörden, Wertstoffhöfen oder dort, wo Sie das Gerät erworben haben.  
Smaltimento di apparecchiature da rottamare da parte di privati nell'Unione Europea  
Questo simbolo che appare sul prodotto o sulla confezione indica che il prodotto non deve essere smaltito assieme agli altri rifiuti domestici. Gli utenti devono provvedere allo  
smaltimento delle apparecchiature da rottamare portandole al luogo di raccolta indicato per il riciclaggio delle apparecchiature elettriche ed elettroniche. La raccolta e il riciclaggio  
separati delle apparecchiature da rottamare in fase di smaltimento favoriscono la conservazione delle risorse naturali e garantiscono che tali apparecchiature vengano rottamate  
nel rispetto dell'ambiente e della tutela della salute. Per ulteriori informazioni sui punti di raccolta delle apparecchiature da rottamare, contattare il proprio comune di residenza,  
il servizio di smaltimento dei rifiuti locale o il negozio presso il quale è stato acquistato il prodotto.  
Eliminación de residuos de aparatos eléctricos y electrónicos por parte de usuarios domésticos en la Unión Europea  
Este símbolo en el producto o en el embalaje indica que no se puede desechar el producto junto con los residuos domésticos. Por el contrario, si debe eliminar este tipo de residuo, es  
responsabilidad del usuario entregarlo en un punto de recogida designado de reciclado de aparatos electrónicos y eléctricos. El reciclaje y la recogida por separado de estos residuos  
en el momento de la eliminación ayudará a preservar recursos naturales y a garantizar que el reciclaje proteja la salud y el medio ambiente. Si desea información adicional sobre los  
lugares donde puede dejar estos residuos para su reciclado, póngase en contacto con las autoridades locales de su ciudad, con el servicio de gestión de residuos domésticos o con la  
tienda donde adquirió el producto.  
Likvidace vysloužilého zařízení uživateli v domácnosti v zemích EU  
Tato značka na produktu nebo na jeho obalu označuje, že tento produkt nesmí být likvidován prostým vyhozením do běžného domovního odpadu. Odpovídáte za to, že vysloužilé  
zařízení bude předáno k likvidaci do stanovených sběrných míst určených k recyklaci vysloužilých elektrických a elektronických zařízení. Likvidace vysloužilého zařízení samostatným  
sběrem a recyklací napomáhá zachování přírodních zdrojů a zajišťuje, že recyklace proběhne způsobem chránícím lidské zdraví a životní prostředí. Další informace o tom, kam můžete  
vysloužilé zařízení předat k recyklaci, můžete získat od úřadů místní samosprávy, od společnosti provádějící svoz a likvidaci domovního odpadu nebo v obchodě, kde jste produkt  
zakoupili.  
Bortskaffelse af affaldsudstyr for brugere i private husholdninger i EU  
Dette symbol på produktet eller på dets emballage indikerer, at produktet ikke må bortskaffes sammen med andet husholdningsaffald. I stedet er det dit ansvar at bortskaffe affaldsudstyr  
ved at aflevere det på dertil beregnede indsamlingssteder med henblik på genbrug af elektrisk og elektronisk affaldsudstyr. Den separate indsamling og genbrug af dit affaldsudstyr på  
tidspunktet for bortskaffelse er med til at bevare naturlige ressourcer og sikre, at genbrug finder sted på en måde, der beskytter menneskers helbred samt miljøet. Hvis du vil vide mere  
om, hvor du kan aflevere dit affaldsudstyr til genbrug, kan du kontakte kommunen, det lokale renovationsvæsen eller den forretning, hvor du købte produktet.  
Afvoer van afgedankte apparatuur door gebruikers in particuliere huishoudens in de Europese Unie  
Dit symbool op het product of de verpakking geeft aan dat dit product niet mag worden afgevoerd met het huishoudelijk afval. Het is uw verantwoordelijkheid uw afgedankte apparatuur  
af te leveren op een aangewezen inzamelpunt voor de verwerking van afgedankte elektrische en elektronische apparatuur. De gescheiden inzameling en verwerking van uw afgedankte  
apparatuur draagt bij tot het sparen van natuurlijke bronnen en tot het hergebruik van materiaal op een wijze die de volksgezondheid en het milieu beschermt. Voor meer informatie over  
waar u uw afgedankte apparatuur kunt inleveren voor recycling kunt u contact opnemen met het gemeentehuis in uw woonplaats, de reinigingsdienst of de winkel waar u het product  
hebt aangeschaft.  
Eramajapidamistes kasutuselt kõrvaldatavate seadmete käitlemine Euroopa Liidus  
Kui tootel või toote pakendil on see sümbol, ei tohi seda toodet visata olmejäätmete hulka. Teie kohus on viia tarbetuks muutunud seade selleks ettenähtud elektri- ja elektroonikaseadmete  
utiliseerimiskohta. Utiliseeritavate seadmete eraldi kogumine ja käitlemine aitab säästa loodusvarasid ning tagada, et käitlemine toimub inimeste tervisele ja keskkonnale ohutult.  
Lisateavet selle kohta, kuhu saate utiliseeritava seadme käitlemiseks viia, saate küsida kohalikust omavalitsusest, olmejäätmete utiliseerimispunktist või kauplusest, kust te seadme  
ostsite.  
Hävitettävien laitteiden käsittely kotitalouksissa Euroopan unionin alueella  
Tämä tuotteessa tai sen pakkauksessa oleva merkintä osoittaa, että tuotetta ei saa hävittää talousjätteiden mukana. Käyttäjän velvollisuus on huolehtia siitä, että hävitettävä laite  
toimitetaan sähkö- ja elektroniikkalaiteromun keräyspisteeseen. Hävitettävien laitteiden erillinen keräys ja kierrätys säästää luonnonvaroja. Näin toimimalla varmistetaan myös,  
että kierrätys tapahtuu tavalla, joka suojelee ihmisten terveyttä ja ympäristöä. Saat tarvittaessa lisätietoja jätteiden kierrätyspaikoista paikallisilta viranomaisilta, jäteyhtiöiltä tai tuotteen  
jälleenmyyjältä.  
Απόρριψη άχρηστων συσκευών στην Ευρωπαϊκή Ένωση  
Το παρόν σύμβολο στον εξοπλισμό ή στη συσκευασία του υποδεικνύει ότι το προϊόν αυτό δεν πρέπει να πεταχτεί μαζί με άλλα οικιακά απορρίμματα. Αντίθετα, ευθύνη σας είναι να  
απορρίψετε τις άχρηστες συσκευές σε μια καθορισμένη μονάδα συλλογής απορριμμάτων για την ανακύκλωση άχρηστου ηλεκτρικού και ηλεκτρονικού εξοπλισμού. Η χωριστή συλλογή και  
ανακύκλωση των άχρηστων συσκευών θα συμβάλει στη διατήρηση των φυσικών πόρων και στη διασφάλιση ότι θα ανακυκλωθούν με τέτοιον τρόπο, ώστε να προστατεύεται η υγεία των  
ανθρώπων και το περιβάλλον. Για περισσότερες πληροφορίες σχετικά με το πού μπορείτε να απορρίψετε τις άχρηστες συσκευές για ανακύκλωση, επικοινωνήστε με τις κατά τόπους αρμόδιες  
αρχές ή με το κατάστημα από το οποίο αγοράσατε το προϊόν.  
A hulladékanyagok kezelése a magánháztartásokban az Európai Unióban  
Ez a szimbólum, amely a terméken vagy annak csomagolásán van feltüntetve, azt jelzi, hogy a termék nem kezelhető együtt az egyéb háztartási hulladékkal. Az Ön feladata,  
hogy a készülék hulladékanyagait eljuttassa olyan kijelölt gyűjtőhelyre, amely az elektromos hulladékanyagok és az elektronikus berendezések újrahasznosításával foglalkozik.  
A hulladékanyagok elkülönített gyűjtése és újrahasznosítása hozzájárul a természeti erőforrások megőrzéséhez, egyúttal azt is biztosítja, hogy a hulladék újrahasznosítása az  
egészségre és a környezetre nem ártalmas módon történik. Ha tájékoztatást szeretne kapni azokról a helyekről, ahol leadhatja újrahasznosításra a hulladékanyagokat, forduljon  
a helyi önkormányzathoz, a háztartási hulladék begyűjtésével foglalkozó vállalathoz vagy a termék forgalmazójához.  
Lietotāju atbrīvošanās no nederīgām ierīcēm Eiropas Savienības privātajās mājsaimniecībās  
Šis simbols uz ierīces vai tās iepakojuma norāda, ka šo ierīci nedrīkst izmest kopā ar pārējiem mājsaimniecības atkritumiem. Jūs esat atbildīgs par atbrīvošanos no nederīgās ierīces,  
to nododot norādītajā savākšanas vietā, lai tiktu veikta nederīgā elektriskā un elektroniskā aprīkojuma otrreizējā pārstrāde. Speciāla nederīgās ierīces savākšana un otrreizējā pārstrāde  
palīdz taupīt dabas resursus un nodrošina tādu otrreizējo pārstrādi, kas sargā cilvēku veselību un apkārtējo vidi. Lai iegūtu papildu informāciju par to, kur otrreizējai pārstrādei var  
nogādāt nederīgo ierīci, lūdzu, sazinieties ar vietējo pašvaldību, mājsaimniecības atkritumu savākšanas dienestu vai veikalu, kurā iegādājāties šo ierīci.  
Europos Sąjungos vartotojų ir privačių namų ūkių atliekamos įrangos išmetimas  
Šis simbolis ant produkto arba jo pakuotės nurodo, kad produktas negali būti išmestas kartu su kitomis namų ūkio atliekomis. Jūs privalote išmesti savo atliekamą įrangą atiduodami ją  
į atliekamos elektronikos ir elektros įrangos perdirbimo punktus. Jei atliekama įranga bus atskirai surenkama ir perdirbama, bus išsaugomi natūralūs ištekliai ir užtikrinama, kad įranga  
yra perdirbta žmogaus sveikatą ir gamtą tausojančiu būdu. Dėl informacijos apie tai, kur galite išmesti atliekamą perdirbti skirtą įrangą kreipkitės į atitinkamą vietos tarnybą, namų ūkio  
atliekų išvežimo tarnybą arba į parduotuvę, kurioje pirkote produktą.  
Utylizacja zużytego sprzętu przez użytkowników domowych w Unii Europejskiej  
Symbol ten umieszczony na produkcie lub opakowaniu oznacza, że tego produktu nie należy wyrzucać razem z innymi odpadami domowymi. Użytkownik jest odpowiedzialny za  
dostarczenie zużytego sprzętu do wyznaczonego punktu gromadzenia zużytych urządzeń elektrycznych i elektronicznych. Gromadzenie osobno i recykling tego typu odpadów  
przyczynia się do ochrony zasobów naturalnych i jest bezpieczny dla zdrowia i środowiska naturalnego. Dalsze informacje na temat sposobu utylizacji zużytych urządzeń można  
uzyskać u odpowiednich władz lokalnych, w przedsiębiorstwie zajmującym się usuwaniem odpadów lub w miejscu zakupu produktu.  
Descarte de equipamentos por usuários em residências da União Européia  
Este símbolo no produto ou na embalagem indica que o produto não pode ser descartado junto com o lixo doméstico. No entanto, é sua responsabilidade levar os equipamentos  
a serem descartados a um ponto de coleta designado para a reciclagem de equipamentos eletro-eletrônicos. A coleta separada e a reciclagem dos equipamentos no momento do  
descarte ajudam na conservação dos recursos naturais e garantem que os equipamentos serão reciclados de forma a proteger a saúde das pessoas e o meio ambiente. Para obter mais  
informações sobre onde descartar equipamentos para reciclagem, entre em contato com o escritório local de sua cidade, o serviço de limpeza pública de seu bairro ou a loja em que  
adquiriu o produto.  
Postup používateľov v krajinách Európskej únie pri vyhadzovaní zariadenia v domácom používaní do odpadu  
Tento symbol na produkte alebo na jeho obale znamená, že nesmie by vyhodený s iným komunálnym odpadom. Namiesto toho máte povinnos odovzda toto zariadenie na zbernom  
mieste, kde sa zabezpečuje recyklácia elektrických a elektronických zariadení. Separovaný zber a recyklácia zariadenia určeného na odpad pomôže chráni prírodné zdroje a  
zabezpečí taký spôsob recyklácie, ktorý bude chráni ľudské zdravie a životné prostredie. Ďalšie informácie o separovanom zbere a recyklácii získate na miestnom obecnom úrade,  
vo firme zabezpečujúcej zber vášho komunálneho odpadu alebo v predajni, kde ste produkt kúpili.  
Ravnanje z odpadno opremo v gospodinjstvih znotraj Evropske unije  
Ta znak na izdelku ali embalaži izdelka pomeni, da izdelka ne smete odlagati skupaj z drugimi gospodinjskimi odpadki. Odpadno opremo ste dolžni oddati na določenem zbirnem  
mestu za recikliranje odpadne električne in elektronske opreme. Z ločenim zbiranjem in recikliranjem odpadne opreme ob odlaganju boste pomagali ohraniti naravne vire in zagotovili,  
da bo odpadna oprema reciklirana tako, da se varuje zdravje ljudi in okolje. Več informacij o mestih, kjer lahko oddate odpadno opremo za recikliranje, lahko dobite na občini,  
v komunalnem podjetju ali trgovini, kjer ste izdelek kupili.  
Kassering av förbrukningsmaterial, för hem- och privatanvändare i EU  
Produkter eller produktförpackningar med den här symbolen får inte kasseras med vanligt hushållsavfall. I stället har du ansvar för att produkten lämnas till en behörig återvinningsstation  
för hantering av el- och elektronikprodukter. Genom att lämna kasserade produkter till återvinning hjälper du till att bevara våra gemensamma naturresurser. Dessutom skyddas både  
människor och miljön när produkter återvinns på rätt sätt. Kommunala myndigheter, sophanteringsföretag eller butiken där varan köptes kan ge mer information om var du lämnar  
kasserade produkter för återvinning.  
Изхвърляне на оборудване за отпадъци от потребители в частни домакинства в Европейския съюз  
Този символ върху продукта или опаковката му показва, чеŽпродуктът не трябва да се изхвърля заедно с домакинските отпадъци. Вие имате отговорността да изхвърлите  
оборудването за отпадъци, като го предадете на определен пункт за рециклиране на електрическо или механично оборудване за отпадъци. Отделното събиране и рециклиране  
на оборудването за отпадъци при изхвърлянето му помага за запазването на природни ресурси и гарантира рециклиране, извършено така, чеŽда не застрашава човешкото  
здраве и околната среда. За повече информация къде можете да оставите оборудването за отпадъци за рециклиране се свържете със съответния офис в града ви, фирмата за  
събиране на отпадъци или сŽмагазина, от който сте закупили продукта  
Înlăturarea echipamentelor uzate de către utilizatorii casnici din Uniunea Europeană  
Acest simbol de pe produs sau de pe ambalajul produsului indică faptul că acest produs nu trebuie aruncat alături de celelalte deşeuri casnice. În loc să procedaţi astfel, aveţi  
responsabilitatea să vă debarasaţi de echipamentul uzat predându-l la un centru de colectare desemnat pentru reciclarea deşeurilor electrice şi aŽechipamentelor electronice.  
Colectarea şi reciclarea separată aŽechipamentului uzat atunci când doriţi să îl aruncaţi ajută la conservarea resurselor naturale şi asigură reciclarea echipamentului într-o manieră care  
protejează sănătatea umană şi mediul. Pentru informaţii suplimentare despre locul în care se poate preda echipamentul uzat pentru reciclare, luaţi legătura cu primăria locală, cu  
serviciul de salubritate sau cu vânzătorul de la care aţi achiziţionat produsul.  
Chemical Substances  
HP is committed to providing our customers with information about the chemical substances in our  
products as needed to comply with legal requirements such as REACH (Regulation EC No  
Environmental product stewardship program  
47  
   
Chapter 8  
1907/2006 of the European Parliament and the Council). A chemical information report for this  
product can be found at: www.hp.com/go/reach.  
Toxic and hazardous substance table  
Regulatory notices  
The HP All-in-One meets product requirements from regulatory agencies in your country/region.  
This section contains the following topics:  
Regulatory model identification number  
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The  
Regulatory Model Number for your product is VCVRA-1001. This regulatory number should not be  
confused with the marketing name (HP Deskjet 1050 All-in-One series, etc.) or product numbers  
(CB730A, etc.).  
48  
Technical information  
       
FCC statement  
FCC statement  
The United States Federal Communications Commission (in 47 CFR 15.105) has specified  
that the following notice be brought to the attention of users of this product.  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-  
able protection against harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient the receiving antenna.  
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
For further information, contact:  
Manager of Corporate Product Regulations  
Hewlett-Packard Company  
3000 Hanover Street  
Palo Alto, Ca 94304  
(650) 857-1501  
Modifications (part 15.21)  
The FCC requires the user to be notified that any changes or modifications made to this  
device that are not expressly approved by HP may void the user's authority to operate the  
equipment.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions: (1) this device may not cause harmful interference, and (2) this device must  
accept any interference received, including interference that may cause undesired  
operation.  
Notice to users in Korea  
VCCI (Class B) compliance statement for users in Japan  
䈖䈱ⵝ⟎䈲䇮䉪䊤䉴Bᖱႎᛛⴚⵝ⟎䈪䈜䇯䈖䈱ⵝ⟎䈲䇮ኅᐸⅣႺ䈪૶↪䈜䉎䈖䈫䉕⋡⊛䈫䈚䈩  
䈇䉁䈜䈏䇮䈖䈱ⵝ⟎䈏䊤䉳䉥䉇䊁䊧䊎䉳䊢䊮ฃାᯏ䈮ㄭធ䈚䈩૶↪䈘䉏䉎䈫䇮ฃା㓚ኂ䉕ᒁ䈐  
⿠䈖䈜䈖䈫䈏䈅䉍䉁䈜䇯ขᛒ⺑᣿ᦠ䈮ᓥ䈦䈩ᱜ䈚䈇ข䉍ᛒ䈇䉕䈚䈩ਅ䈘䈇䇯  
VCCI-B  
Regulatory notices  
49  
     
Chapter 8  
Notice to users in Japan about the power cord  
HP Deskjet 1050 All-in-One series declaration of conformity  
DECLARATION OF CONFORMITY  
according to ISO/IEC 17050-1 and EN 17050-1  
DoC #: VCVRA-1001-01  
Supplier's Name:  
Hewlett-Packard Company  
60 Alexandra Terrace, #07-01 The Comtech, Singapore 118502  
Supplier's Address:  
declares, that the product  
Product Name and Model:  
HP Deskjet 2050 All-in-One Series  
HP Deskjet 1050 All-in-One Series  
Regulatory Model Number:1) VCVRA-1001  
Product Options:  
All  
Power Adapter:  
0957-2286  
0957-2290 (China and India only)  
conforms to the following Product Specifications and Regulations:  
EMC: Class B  
CISPR 22:2005  
EN 55022:2006 + A1:2007  
CISPR 24:1997 +A1:2001 +A2:2002  
EN 55024:1998 +A1:2001 +A2:2003  
EN 61000-3-2:2006  
EN 61000-3-3:1995 +A1:2001 +A2:2005  
FCC CFR 47 Part 15  
Safety:  
IEC 60950-1:2005  
EN 60950-1:2006  
IEC 60825-1:1993 +A1:1997 +A2:2001  
EN 60825-1:1994 +A1:2002 +A2:2001  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC  
Directive 2004/108/EC and carries the  
marking accordingly.  
Additional Information:  
1) This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the  
design. The Regulatory Model Number is the main product identifier in the regulatory documentation and  
test reports, this number should not be confused with the marketing name or the product numbers.  
Local contact for regulatory topics only:  
EMEA: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany  
U.S.: Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501  
50  
Technical information  
   
Index  
scan specifications 44  
system requirements 43  
A
after the support period 42  
W
C
copy  
warranty 42  
specifications 44  
customer support  
E
environment  
Environmental product  
stewardship program 45  
environmental  
specifications 43  
P
paper  
recommended types 15  
phone support 41  
phone support period  
period for support 41  
print  
specifications 44  
R
recycle  
ink cartridges 46  
regulatory notices  
regulatory model  
identification number 48  
S
scan  
scan specifications 44  
support process 41  
system requirements 43  
T
technical information  
copy specifications 44  
environmental  
specifications 43  
print specifications 44  
51  
 
52  

Briggs Stratton 8FBPC User Manual
Briggs Stratton Automobile Parts 550e User Manual
Brother Printer HL 3045CN User Manual
Canon PIXMA MP470 User Manual
Carrier 30HH User Manual
Danby DDR601 User Manual
Danby Products Air Conditioner DPAC8KDB User Manual
Freecom Technologies RCS M2000U User Manual
Friedrich PDXDEA User Manual
HP Hewlett Packard LASERJET 3390 User Manual