Epson WorkForce 610 Series User Manual

Series  
Start Here  
1
Unpack  
Phone cord  
Power cord  
(Included for  
Canada only)  
If anything is missing, contact Epson as described on the back under  
“Any questions?”.  
Note: The model name of your product may vary slightly from the one shown above.  
The included CD and documentation apply to all products in the series.  
Caution: Do not open ink cartridge packages until you are ready to install the ink.  
Cartridges are vacuum packed to maintain reliability.  
Canada only: For French speakers, remove stickers from the backing sheet and place  
over corresponding text on the control panel.  
Remove all protective materials.  
2
1
Turn on and adjust  
Connect the power cable.  
Caution: Do not connect to your computer yet.  
2
Lift the control panel to raise it, then press the  
On button.  
On  
Note: To lower the control panel, squeeze the release lever underneath and push the  
control panel down. For more information on using and adjusting the control panel,  
see your Quick Guide.  
3
Make settings  
1
Select your language.  
Press or to select the  
desired option.  
Press OK when done.  
2
3
Select your country/region, then press OK.  
For the Daylight Saving Time setting, select Summer if your region uses  
Daylight Saving Time and it’s currently in effect. (DST is effective from  
spring through summer.) Otherwise, select Winter to turn off the setting.  
Press OK.  
4
5
Press  
or  
to select the date format,  
then press . Don’t press OK yet.  
Use the numeric keypad to set the date. Don’t press OK yet.  
6
7
Press  
or  
to select the time format,  
then press . Don’t press OK yet.  
Use the numeric keypad to set the time.  
8
9
If you selected 12h as the time format, press  
select AM or PM.  
or  
to  
Press OK when done.  
Note: You can change the date and time settings by pressing the Home button,  
selecting Setup, selecting Printer Setup, then selecting Date/Time.  
4
Install ink cartridges  
Note: Don’t load paper before installing the ink cartridges.  
1
2
Lift up the scanner.  
Open the cartridge cover.  
3
4
Shake the ink cartridges  
gently 4 or 5 times, then  
unpack them.  
Remove only the yellow tape from each cartridge.  
Caution: Don’t remove any other seals or the cartridges may leak.  
5
Insert the cartridges in the  
holder for each color.  
6
7
8
Press each cartridge down until it clicks.  
Close the ink cartridge cover and press it  
down until it clicks.  
Lower the scanner.  
9
Press the OK button to charge the ink. Charging takes about 3 minutes.  
Note: Your product ships with full cartridges and part of the ink from the first  
cartridges is used for priming the product.  
Caution: Don’t turn off the product while the ink system is charging or you’ll  
waste ink.  
5
1
Load paper  
Open the paper support and pull up the extensions.  
2
Extend the output tray and raise the stopper.  
Note: If you are using legal-size paper, do not raise the stopper.  
3
4
Hold the feeder guard forward, then squeeze the edge guide and slide it  
to the left.  
Load paper against the right edge guide and behind the tab, with the  
printable side face up.  
Note: Don’t load the paper sideways; always load it  
short edge first.  
5
Slide the edge guide over.  
6
Connect the phone cord  
To use your product for faxing, connect the included phone cord from a  
telephone wall jack to the LINE port on the product. To connect a telephone or  
answering machine, see the Quick Guide for instructions.  
Note: If you’re connecting to a DSL phone line, you must use a DSL filter or you won’t  
be able to fax. Contact your DSL provider for the necessary filter.  
7
Choose your connection  
See your Network Installation Guide.  
You can’t install your software as  
described below.  
OR  
USB connection  
Make sure you have a USB cable (not included).  
Then follow the steps below.  
USB connection  
Follow these steps to connect your product directly to your computer using a  
USB cable (not included).  
Windows  
1
Make sure the product is NOT  
CONNECTED to your computer.  
Note: If you see a Found New Hardware  
screen, click Cancel and disconnect the  
USB cable. You can’t install your software  
that way.  
2
3
Insert the WorkForce 610 Series software CD.  
®
With Windows Vista , if you see the AutoPlay  
window, click Run SETUP.EXE. When you see the  
User Account Control screen, click Continue.  
Click Install and follow the on-screen instructions.  
4
5
When you see this screen, select Install driver for direct USB  
connection and then click Next.  
When prompted, connect a USB cable. Use any open USB port on  
your computer.  
Note: If installation doesn’t continue after a moment, make sure you  
securely connected and turned on the product.  
6
7
Follow the on-screen instructions to install the rest of the software and  
register your product.  
Be sure to register your product to receive these great benefits: 2-year  
limited warranty and 2-year toll-free customer support.*  
When you’re done, remove the CD.  
You’re ready to print, copy, scan, and fax! See your Quick Guide or online  
Epson Information Center.  
Macintosh®  
1
Make sure the product is NOT CONNECTED to your computer.  
2
Insert the WorkForce 610 Series  
software CD.  
3
4
Double-click the  
Epson icon.  
Click Install and follow the on-screen instructions.  
5
When you see this screen, select Install driver for direct USB  
connection and then click Next.  
6
When prompted, connect a USB cable. Use any open USB port on your  
computer. Make sure the product is securely connected and turned on.  
®
Mac OS X 10.5 users: skip to step 9. Other users: continue with step 7.  
7
8
When you see this screen, click Add Printer. Follow the steps on the right  
side of the screen to add the product.  
Click Next again, if necessary.  
9
Follow the on-screen instructions to install the rest of the software and  
register your product.  
Be sure to register your product to receive these great benefits: 2-year  
limited warranty and 2-year toll-free customer support.*  
10 When you’re done, eject the CD.  
You’re ready to print, copy, scan, and fax! See your Quick Guide or online  
Epson Information Center.  
Any questions?  
Quick Guide  
Basic instructions for printing, copying, scanning, and faxing.  
Online Epson Information Center  
Click the desktop shortcut for easy access to the user’s guide, FAQs, online  
troubleshooting advice, and software downloads. You can also purchase  
paper and ink.  
Network Installation Guide and Video  
Instructions on configuring the product for a network. For a  
video tutorial and other information about setting up a wireless  
network, go to: epson.com/support/wireless  
On-screen help with your software  
Select Help or ? when you’re using your software.  
Epson Technical Support  
Internet Support  
Visit Epson’s support website at epson.com/support and select your  
product for solutions to common problems. You can download drivers and  
documentation, get FAQs and troubleshooting advice, or e-mail Epson with  
your questions.  
Speak to a Support Representative  
Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 AM to 6 PM, Pacific  
Time, Monday through Friday. Days and hours of support are subject to change  
without notice. Toll or long distance charges may apply.  
Software Technical Support  
ArcSoft Print Creations™  
NewSoft® Presto! PageManager®  
(408) 503-1212  
Fax (408) 503-1201  
Need paper and ink?  
Try Epson paper with DURABrite® Ultra Ink for professional results. For the right  
supplies at the right time, you can purchase them at Epson Supplies CentralSM  
at www.epson.com/ink3 (U.S. sales) or www.epson.ca (Canadian sales).  
You can also purchase supplies from an Epson authorized reseller. To find the  
nearest one, call 800-GO-EPSON (800-463-7766).  
Genuine Epson Paper  
Epson offers a wide variety of papers to meet your needs; visit Epson Supplies  
Central for more information.  
Presentation Paper Matte  
Ultra smooth, non-glare, instant-drying paper  
for scrapbooks, newsletters, and graphical presentations.  
Genuine Epson Inks  
Look for the numbers below to find  
your cartridges. It’s as easy as  
remembering your number!  
Standard-  
capacity  
Extra High-  
capacity  
Color  
High-capacity  
Black  
69  
69  
69  
69  
68  
68  
68  
68  
97  
Cyan  
–––  
–––  
–––  
Magenta  
Yellow  
* 1-year limited warranty to all purchasers; 2-year toll-free support and second year  
warranty require registration within 60 days of purchase. For California and Québec  
residents, failure to submit this product registration form does not diminish your warranty  
rights.  
Epson is a registered trademark, Epson Exceed Your Vision is a registered logomark, and  
Supplies Central is a service mark of Seiko Epson Corporation. DURABrite and WorkForce  
are registered trademarks of Epson America, Inc.  
General Notice: Other product names used herein are for identification purposes only and  
may be trademarks of their respective owners. Epson disclaims any and all rights in those  
marks.  
This information is subject to change without notice.  
© 2009 Epson America, Inc. 4/09  
CPD-27495  
Cut out the card to the  
right and keep it with  
you when purchasing  
replacement ink  
WORKFORCE® 610 Series Ink Cartridges  
High-  
capacity  
Extra High-  
capacity  
Standard-  
capacity  
Color  
Black  
Cyan  
cartridges.  
69  
69  
69  
69  
68  
68  
68  
68  
97  
––  
––  
––  
Magenta  
Yellow  
Printed in XXXXXX  
Printed in XXXXXX  

Bryant Air Conditioner 123A User Manual
Canon PIXMA MP470 Series User Manual
Canon Printer H12 4605 User Manual
Carrier 38CQ User Manual
Clarity Answering Machine M175C User Manual
Cornelius Focus CG5052 0308 User Manual
Friedrich KQ08E10 User Manual
GE General Electric Air Conditioner APE08 User Manual
GE General Electric Answering Machine 29869 User Manual
Graco Bumper Jumper 4E02LJG User Manual