Contents
Product Specifications
i.Cube Overview
Charging Your Headset
Pairing Your Headset with a Bluetooth Mobile Phone
Pairing Your Headset with Two Mobile Phones (Multipoint)
Using Your Headset
3
4
5-6
6
7
7-9
9
Favourite Number Key
Transferring Two Favourite Phone Numbers from Your Paired
Mobile Phones to Your Headset
Overwriting Your Previously Saved Phone Number
Speed Dialing Your Favourite Numbers from Your Headset
when Multipoint is On
Resetting Your Headset / Removing the Pairing History
Troubleshooting
10
10
11
11
12
13-14
14-16
Safety Information
Care and Maintenance
User Guide
i.Cube
Bluetooth Headset
2
Product Specifications
i.Cube Overview
Bluetooth Specification:
Bluetooth Profiles Supported:
Range of Frequency:
Operating Distance:
Charging Time:
Talk Time*:
Standby Time*:
Dimensions:
Weight:
v1.2 class 2
Headset and Handsfree
2.4GHz Spectrum
10 meters
Within 3 hours
Up to 5 hours
Up to 120 hours
35 (L) x 18 (W) x 12 (H) mm
6.1 grams
4
7
1
2
3
* May vary due to users’ operation mode and mobile phone settings
5
6
1. Status Indicator / Multi-function Button (MFB)
2. Earpiece
3. Volume Key (＋/－)
5. Built-in Microphone
6. Built-in Rechargeable Battery
7. Charging Socket
4. Favourite Number Key
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Headset (cont'd)
Transferring Two Favourite Phone Numbers from One of Your Two Paired
Mobile Phones to Your Headset
1) Ensure the headset is paired with the mobile phone and is turned off.
2) To activate the OPP mode, first press the Favourite Number Key then the MFB and
keep pressing both keys simultaneously for 8 seconds without releasing your fingers
until the status indicator flashes alternating blue and red lights.
3) On your mobile phone’s phonebook, select a phone number you want to save in the
headset, then go to “Send Contact”, select “Bluetooth”, then “i.Cube”. When sent,
“Sent” will be shown on your mobile phone’s screen, indicating that the number has
been sent and saved in the headset.
Function
Button
Audio
Status Indicator
Reject a Call
Press and hold either volume
key and the MFB simultaneously
for 2 seconds
a short beep Flashing blue light
a short beep Flashing blue light
a short beep Flashing blue light
Transfer a Call
While speaking, press and hold
(headset to mobile phone) either volume key and MFB
simultaneously for 2 seconds
Transfer a Call
(mobile phone back to
headset)
While speaking, press the MFB
once
If a number cannot transfer to the headset within 3 minutes after the OPP mode has
been activated, the headset will automatically turn off.
To save another favourite phone number, repeat steps 1 to 3.
To transfer two more favourite numbers from your another paired mobile phone to the
headset, also repeat steps 1 to 3.
Favourite Number Key (Mobile phone must support Bluetooth OPP)
The function of “Favourite Number Key” allows you to save your two favourite phone
numbers from each of your two mobile phones paired with the headset (total four
numbers), as well as to speed dial them. Instructions on the next page may vary with
different phone models.
Overwriting Your Previously Saved Phone Number
If you have already saved four favourite numbers in the headset and now you want to
save a new one. The new one will automatically overwrite the first number you had
previously saved in sequential order (First in First out).
9
10
Speed Dialing Your Favourite Numbers from Your Headset when
Multipoint is On
Troubleshooting
I can hear crackling noise.
To receive the best audio quality, it is recommended to wear your headset on the same
side of the body as your mobile phone.
I can't hear anything in my headset.
1) Ensure the headset is connected with both mobile phones and is turned on.
2) Press the Favourite Number Key once, then the MFB once to speed dial the last
number saved (Last in First out) from your last mobile phone used.
3) Press the Favourite Number Key twice, then the MFB once to speed dial the previous
number saved from your last mobile phone used.
• Ensure the headset is turned on and is properly charged.
• Ensure the headset is properly paired with the mobile phone.
• Make sure that the mobile phone is connected with the headset – if it does not
connect, either refer to the mobile phone's Bluetooth menu, or press the MFB once
(see “Using Your Headset” and “Pairing Your Headset with a Bluetooth Mobile Phone”).
I can't connect my headset with my mobile phone.
• Ensure your headset is turned on and is properly charged.
• Ensure the headset is properly paired with your mobile phone.
• Ensure your mobile phone’s Bluetooth feature is activated. Please refer to your
mobile phone user guide for specific instruction.
Resetting Your Headset / Removing the Pairing History
You may reset the headset to its default settings. Resetting will also remove the pairing
settings of your headset with the mobile phone.
1.Connect the supplied charger to your headset and then to AC power. The status
indicator will stay red.
2.Press and hold the Vol + for 10 seconds until the status indicator flashes purple.
3.Release the Vol +.
4.Press and hold the Vol + again until the status indicator flashes purple and then
release the Vol +.
• Ensure the headset is within ten meters' range of your mobile phone and there are no
obstructions, such as walls or other electronic devices in between.
If the above steps do not solve your problem, please recharge the headset and remove
your mobile phone’s battery for a while.
5.The status indicator will stay red again and the headset is reset.
I can’t turn off the headset.
Recharge the headset for two seconds then disconnect the charger from the headset.
The headset now turns off.
i.Tech Bluetooth headset is designed to work with Bluetooth devices. Due to large
variability between different Bluetooth devices from different manufacturers,
interoperability between the headset and all Bluetooth-enabled products is not
guaranteed.
12
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
Safety Information (cont'd)
• Check and observe local laws regarding the use of a mobile phone and a headset while
driving. If you use the headset while driving, ensure your full attention and focus. It is
your responsibility to drive safely.
• Never leave your headset above any air bag deployment area inside your car, as
serious injury may result when an air bag deploys.
• Do not attempt to force open the built-in battery.
• Dispose of the battery and the headset according to local regulations. Do not dispose
of them as household waste.
• Never allow children to play with the headset – small parts may be of choking hazard.
• Observe all signs and displays that require an electrical device or RF radio product to
be switched off in designated areas. These could include hospitals, blasting areas, and
potentially explosive atmospheres.
• Turn off your headset prior to boarding an aircraft. Do not use your headset inside an
aircraft.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
• To prevent damage to your hearing, please do not set the listening volume too high.
• Do not attempt to modify the headset.
• Never use the headset while taking a bath.
Care and Maintenance
Headset
• Do not use the headset in a sauna or steam room.
• Do not keep the headset near a wash basin or other wet places.
• Do not use the headset outdoors in the rain.
• Do not use the headset in stormy weather.
• Do not clean the headset while it is being charged. Always disconnect the charger from
the headset before cleaning.
• Turn off your headset before placing it in your pocket or bag. If the MFB is accidentally
depressed, your mobile phone may place an unintended call.
• Do not expose the headset to liquid, moisture or humidity, or rain as it is not
waterproof.
• Do not use abrasive cleaners to clean the headset.
13
14
Care and Maintenance (cont’d)
Care and Maintenance (cont’d)
Built-in Battery
• Do not expose the headset to extremely high or low temperatures.
• Do not leave the headset in direct sunlight for an extended period of time.
• Do not leave the headset near open flames such as cooking burners.
• Do not dispose of the headset in a fire, as it will result in explosion.
• Do not attempt to replace the headset’s battery as it is in-built and is not changeable.
• Dispose of the battery according to local regulations. Do not dispose of the battery as
household waste.
• Charge the battery in accordance with the instructions supplied with this user guide.
• Use only the charger supplied by the headset’s original manufacturer to charge the
battery.
• Do not bring the headset into contact with any sharp objects, as this will cause scratches
and damages.
• Do not stick anything inside the headset, as this may damage internal components.
• Do not attempt to disassemble the headset as it does not contain serviceable
components.
Charger
• Use only the charger supplied by the headset’s original manufacturer to charge the
headset. Other chargers may look similar but using them could be dangerous and
could damage the headset.
• If you do not plan to use the headset for a long period, please store it in a dry place that
is free from extreme temperatures and dust.
• Do not attempt to disassemble the charger, as it may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electric shock when the
headset is subsequently used.
• Only charge the headset’s built-in battery in accordance with the instructions described
in this user guide.
• Avoid charging the headset in extremely high or low temperatures.
• Do not connect the headset to the charger while on an active call.
• Do not use the charger outdoors or in damp areas.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Federal Communications Commission (FCC) Statement
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
We, i.Tech Dynamic Limited, declare that the following product:
Product Name: i.Tech i.Cube
Model No.: C51-B08010-XX
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
15.21
You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.
15.105(b)
is in conformity with the following essential requirements of Council Directive 1999/5/EC
(referred to as R&TTE Directive): Article 3.1a, 3.1.b and 3.2. and the product is manufactured
in accordance with Annex II of the above directive.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Notes on Environmental Protection
After the implementation of the European Directive 2002/96/EU in the national legal
system, the following applies: Electrical and electronic devices must not be disposed of with
domestic waste. Consumers are obliged by law to return electrical and electronic devices at
the end of their service lives to the public collection points that are set up for this purpose
or designated points of sale. However, such details are defined by the national law of the
respective country. This symbol on the product, the instruction manual or the packaging
indicates that the product is subject to these regulations. By recycling, reusing the
materials, or other forms of utilizing old devices, you are making an important contribution
in protecting our environment.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
17
18
- Consult the dealer or an experienced radio/TV technician for help.
2008 Hutchison Harbour Ring Enterprises Limited
All rights in this publication are reserved and no part may be reproduced without the prior
written permission of the publisher. The contents of this publication are believed to be
correct at the time of going to press, but any information, specifications, products or
services mentioned, and product I.D. shown may be modified, supplemented or
withdrawn without further notice.
The Stylized i.Tech logos are trademarks owned by Hutchison Harbour Ring Enterprises
Limited or its affiliates. All other trademarks or registered trademarks belong to their
respective owners.
Dispose of the packaging and this product in accordance with the latest provisions.
06/2008
19
Download from Www.Somanuals.com. All Manuals Search And Download.
|