¨
Model No. IMHS45590
Serial No.
USERÕS MANUAL
The serial number is found on a plastic
sign inside the spa behind the slotted
access panel. Write the serial number
in the space above for reference.
Access Panel
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through
direct assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-877-897-7493
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
WARNING:
To reduce the risk of drowning, electric shock, or serious injury, read the fol-
lowing important precautions before using the hydrotherapy spa.
READ AND FOLLOW ALL INSTRUCTIONS
1. It is the responsibility of the owner to ensure
that all users of the hydrotherapy spa are
adequately informed of all precautions.
10. Never insert any object into any opening.
11. Do not use breakable containers in or near
the hydrotherapy spa.
2. Use the hydrotherapy spa only as described
in this manual.
12. Do not sit on the spa cover or place objects
on it; it is not designed to support weight.
3. The hydrotherapy spa is intended for home
use only. Do not use the spa in a commercial,
rental, or institutional setting.
13. Remove any water or debris that may collect
on the spa cover.
14. Keep children under the age of 12 and pets
away from the hydrotherapy spa when it is
not in use.
4. Use the hydrotherapy spa only on a level sur-
face. Do not use the spa on carpet or other
materials that could be damaged by moisture.
15. Keep all chemicals away from children and
pets.
5. The hydrotherapy spa will weigh approxi-
mately 2,133 pounds when it is filled with
water. Make sure that the location you select
for the spa will support this weight, plus the
weight of the occupants.
16. The pH and chemical balance of the water
must be maintained as explained in this man-
ual (see pages 10 and 14). Failure to do so
may cause injury to users or damage to the
hydrotherapy spa, and will void the warranty.
6. Inspect and tighten all parts regularly.
Replace any worn parts immediately.
17. Individuals with infections and open sores or
wounds should not use the hydrotherapy
spa. Bacteria thrive in warm and hot water.
Always keep your spa disinfected and main-
tain the proper chemical balance.
7. DANGERÑRisk of injury: Do not remove or
alter the covers on the suction fittings. Never
operate the hydrotherapy spa if the suction
guard is missing or broken. If you need to
replace a suction fitting or pump, make sure
you use only manufacturer recommended
replacement parts. Keep hair and body parts
away from the suction guard. Do not allow
long hair to float freely in the water; long hair
should be restrained with a bathing cap.
18. Shower before and after using the hydrother-
apy spa. This will remove any deodorant, per-
spiration, or body oils that could contaminate
the water. Showering after will remove any
residual chemicals and any bacteria that may
have been in the spa.
8. IMPORTANT: Do not allow the hydrotherapy
spa to be exposed to direct sunlight when it
is empty. The surface of the spa shell can
reach temperatures as high as 150¡F in a mat-
ter of minutes if exposed to the sun while it is
empty. These high temperatures can cause
significant damage, such as blistering of the
shell surface and warping of the spa shell.
Any damage caused by sun exposure is not
covered under the warranty.
19. DANGERÑWhen connecting the power cord
(see PLUGGING IN THE HYDROTHERAPY
SPA on page 10), plug the power cord directly
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be
on the same circuit. Replace the power cord
immediately if damaged.
20. Do not use an extension cord with the
hydrotherapy spa. This could damage the
motor and will void the warranty.
9. Do not bring any object into the hydrotherapy
spa that could damage the spa shell.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
21. DANGERÑIf you will be using the hydrother-
apy spa outside, do not bury the power cord.
Keep the power cord away from lawn mow-
ers, hedge trimmers, and other similar equip-
ment.
29. WARNINGÑTo reduce the risk of injury: The
water temperature should never exceed
104¡F. Temperatures between 100¡F and 104¡F
are considered to be safe for healthy adults.
However, if you plan to remain in the hydro-
therapy spa for more than 10 to 15 minutes, a
lower temperature is recommended. Lower
temperatures are also recommended for chil-
dren. Children should not be allowed to swim
under the surface of the water in the spa.
22. WARNINGÑThe power cord is equipped with
a Ground Fault Circuit Interrupter (GFCI),
located on the power cord. The GFCI must be
tested before each use. To test the GFCI,
press the ÒtestÓ button while the hydrothera-
py spa is running. The should shut off. Press
the ÒresetÓ button. The spa should resume
normal operation. If the spa continues to run
after the ÒtestÓ button is pressed, the GFCI is
damaged. Do not use the spa until the GFCI
has been repaired or replaced by a qualified
electrician.
30. WARNINGÑTo reduce the risk of injury:
Before entering the hydrotherapy spa, always
use an accurate thermometer to determine
the water temperature.
31. WARNINGÑTo reduce the risk of injury:
Pregnant women should consult with their
physician before using the hydrotherapy spa.
Pregnant women should not use the spa if
the water temperature is above 100¡F; the
unborn child could be seriously harmed. This
is especially important during the first 90
days of the pregnancy.
23. DANGERÑRisk of electric shock. Keep all
electrical appliances such as radios, tele-
phones, televisions, and lights at least five
feet away from the water.
24. A wire connector is provided on the pump
motor of the hydrotherapy spa to connect a
minimum No. 8 AWG (804 mm2) solid copper
conductor between the spa and any metal
equipment, electrical enclosure made of
metal, metal water pipes, or conduit within
five feet of the spa.
32. DANGERÑTo reduce the risk of drowning:
Prolonged immersion in the hydrotherapy spa
may cause hyperthermia, a dangerous condi-
tion that occurs when the internal body tem-
perature rises several degrees above the nor-
mal body temperature of 98.6¡F. The symp-
toms of hyperthermia are nausea, dizziness,
drowsiness, and fainting. Effects include: a
lack of awareness, inability to perceive heat
or danger, and a greater risk of drowning due
to a loss of consciousness. Special note:
Individuals suffering from hyperthermia may
be unable to realize that they must exit the
spa, and they also may be physically unable
to do so.
25. DANGERÑRisk of electric shock: Do not set
the hydrotherapy spa within five feet of any
metal objects or surfaces. As an alternative,
you may use the spa within five feet of metal
objects if each metal object is permanently
connected to the wire connector on the pump
motor of the spa by a minimum No. 8 AWG
(804 mm2) solid copper conductor (see
instruction 24).
33. WARNINGÑTo reduce the risk of drowning:
Do not use the hydrotherapy spa if you are
under the influence of alcohol or drugs. Heat
from the water, in conjunction with alcohol or
drugs, can cause loss of consciousness.
26. Do not operate the pump motor when the
hydrotherapy spa is empty. The pump motor
may be seriously damaged if it is operated
without water circulating.
27. DANGERÑRisk of drowning: Exercise
extreme caution to prevent unauthorized and
unsupervised use of the hydrotherapy spa by
children. Children must always be supervised.
34. WARNINGÑTo reduce the risk of injury or
drowning: Consult your physician about pos-
sible side-effects of any medications you may
be taking before using the hydrotherapy spa.
Heat from the water, in conjunction with some
medications, may cause drowsiness and
increase the risk of drowning. Other medica-
tions can effect blood pressure, heart rate,
and circulation.
28. DANGERÑTo reduce the risk of drowning:
¥ Never use the hydrotherapy spa alone.
¥ Children should not use the spa unless they
are supervised by an adult.
¥ Keep pets away from the spa at all times.
¥ Always replace and lock the spa cover when
the spa is not in use.
35. Do not use the hydrotherapy spa immediately
after strenuous exercise.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
36. If you feel pain or dizziness at any time while
using the hydrotherapy spa, discontinue use
and contact a physician.
41. WARNING DECAL PLACEMENT: Locate the
decals shown below and familiarize yourself
with the information on the decals.
37. WARNINGÑTo reduce the risk of injury: It is
especially important for persons over the age
of 35 or persons with pre-existing health
problems, such as obesity, heart disease,
high or low blood pressure, circulatory prob-
lems, or diabetes to consult their physician
before using the hydrotherapy spa.
38. WARNING: The spa jets produce a stream of
water with relatively high pressure. Prolonged
exposure of a localized area of the body may
cause bruises to the skin.
39. The included warning sign must be posted
where all users of the hydrotherapy spa can
see and read it. (See POSTING THE WARNING
SIGN on page 2.)
40. The causes, symptoms and effects of hyper-
thermia may be described as follows: Hyper-
thermia occurs when the internal temperature
of the body reaches a level of several degrees
above the normal body temperature of 98.6ûF.
The symptoms of hyperthermia include an
increase in the internal temperature of the
body, dizziness, lethargy, drowsiness and
fainting. The effects of hyperthermia include
failure to perceive heat; failure to recognize
the need to exit the spa or hot tub; unaware-
ness of impending hazard; fetal damage in
pregnant women; physical inability to exit the
spa or hot tub and unconsciousness resulting
in danger of drowning. WARNING: The use of
alcohol, drugs or medication can greatly
increase the risk of fatal hyperthermia.
WARNING: Read all instructions before using the hydrotherapy spa. ICON assumes no
responsibility for personal injury or property damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin
Congratulations for selecting the new IMAGE¨
RENEW 455 hydrotherapy spa. The innovative
RENEW 455 allows you to enjoy all the benefits of
hydrotherapy in the comfort and privacy of your home.
For your benefit, read this manual carefully before
using the RENEW 455. If you have additional ques-
tions, please call our Customer Service Department
toll-free at 1-877-897-7493, Monday through Friday,
6 a.m. until 6 p.m. Mountain Time (excluding holidays).
To help us assist you, please mention the product
model number and serial number when calling. The
Hydrotherapy is a proven method for soothing tired
muscles after exercise or for relieving the stress of a
busy life. The warm environment stimulates blood flow, model number is IMHS45590. The serial number can
which is essential in the healing process, and the
powerful massage action further eases tension and
stress throughout the body. The RENEW 455 hydro-
therapy spa gives you the specialized treatment you
need to feel your best.
be found on a decal attached to the frame inside the
spa (see the front cover of this manual).
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Filter
Access Panel
Console
Spa Shell
Jets
Light
Suction Vents
Power Cord with
Ground Fault
Circuit Interrupter
(GFCI)
Locking
Buckle
Wood Panels
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing a Location for the Hydrotherapy Spa
There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary
depending on whether you plan to use the spa inside or outside. We have listed several factors you may wish to
consider as you decide where to set up the spa.
If you set up the hydrotherapy spa inside:
If you set up the hydrotherapy spa outside:
1. The hydrotherapy spa will increase the level of
humidity in your home. The location you choose
should be well ventilated. You may need to install
a ventilation fan or use a dehumidifier.
1. Check local building codes concerning the use of
outdoor spas.
2. The location must be close to an electrical outlet.
Do not use an extension cord with the
hydrotherapy spa.
2. The location must be close to an electrical outlet.
Do not use an extension cord with the
hydrotherapy spa.
3. The hydrotherapy spa should be close to a source
of water.
3. The hydrotherapy spa should be close to a source
of water.
4. We recommend that you place the hydrotherapy
spa on a water- and stain-resistant, non-slip sur-
face. Do not use the hydrotherapy spa on rough or
sharp surfaces such as gravel or wood chips.
4. Do not use the hydrotherapy spa on carpet or
other material that may be damaged by moisture.
We recommend that you place the hydrotherapy
spa on a water- and stain-resistant, non-slip sur-
face with a floor drain for any water that may
splash from the hydrotherapy spa.
5. Be sure that the location you choose is stable. It
must be able to support the weight of the
hydrotherapy spa when it is filled with water, plus
the weight of the occupants. The hydrotherapy spa
weighs approximately 2,133 pounds when it is
filled with water.
5. Be sure that the location you choose is stable. It
must be able to support the weight of the
hydrotherapy spa when it is filled with water, plus
the weight of the occupants. The hydrotherapy spa
weighs approximately 2,133 pounds when it is
filled with water.
6. Think about environmental factors, such as rain,
wind, shade, sunlight etc.
7. You should be able to monitor the use of the
hydrotherapy spa from your home, to prevent
unauthorized use by children. You may want to
enclose the spa with a fence and self-latching gate
to prevent unauthorized use.
6. Do not use the hydrotherapy spa above a finished
living area, due to the risk of water damage.
7. Be sure that there is room around the hydrothera-
py spa to permit servicing of the unit. The dimen-
sions of the spa are 70Ó W x 70Ó L x 35Ó H. You
should allow for this size when choosing the loca-
tion.
8. Be sure that there is room around the hydrothera-
py spa to permit servicing of the unit. The dimen-
sions of the spa are 70Ó W x 70Ó L x 35Ó H. You
should allow for this size when choosing the loca-
tion.
8. The hydrotherapy spa is not designed for in-floor
installation. However, it is compatible with a deck
system that is built flush with the top of the spa,
provided you leave access to the motor for ser-
vice.
9. The hydrotherapy spa is not designed to be
installed below ground level. However, it is com-
patible with a deck system that is built flush with
the top of the spa, provided you leave access to
the motor for service.
9. Be sure to note any other considerations, such as
aesthetics or privacy concerns, that may affect the
safety or enjoyment of using the hydrotherapy spa.
10.Be sure to note any other considerations, such as
aesthetics or privacy concerns, that may affect the
safety or enjoyment of using the hydrotherapy spa.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Before beginning assembly, carefully read the
following information and instructions:
ASSEMBLY REQUIRES THE FOLLOWING
TOOLS (not included):
¥ Place all parts in a cleared area and remove the
packing materials from the spa shell. Do not dis-
pose of the packing materials until assembly is
completed and the spa is operating.
¥ One (1) phillips screwdriver
¥ You may also need a small amount of soap
or water.
¥ During assembly, make sure that all parts are
oriented as shown in the drawings.
A wire connector is provided on the pump
motor of the spa to connect a minimum No. 8
AWG (804 mm2) solid copper conductor
¥ Read each assembly step before you begin.
between the spa and any metal equipment,
electrical enclosure made of metal, metal water
pipes, or conduit within five feet of the spa.
¥ Tighten all parts as you assemble them, unless
instructed to do otherwise.
1. Before beginning assembly, make sure that you
have read and understand the information in the
box above and on the previous two pages.
1
2
Refer to the drawing on page 6 and locate the slotted
Access Panel (2). Remove the four #6 x 1 1/4Ó Wood
Screws (7) from the Access Panel. Remove the
Access Panel by sliding it down and then pulling the
bottom of it away from the spa. Be careful not to
damage the spa shell.
Remove the end of the power cord and the GFCI from
inside the spa.
Power Cord
7
with GFCI
2. Locate the drain hose inside the spa. Close the
valve knob on top of the drain hose. Next, make
sure that the cap is fully tightened onto the end of
the drain hose.
2
Refer to the inset drawing. Locate the two gate
valves inside the spaÑthere is one gate valve on
each side of the access opening. Make sure that the
gate valves are open.
Collars
Refer to step 1 above. Re-attach the Access Panel
(2) to the spa with the four #6 x 1 1/4Ó Wood Screws
(7).
Gate Valve
Collars
Make sure that the two collars on the heater and the
two collars on the pump are tightened.
Drain
Hose
Valve
Knob
Cap
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Refer to the inset drawing. Set a Filter Gasket (33)
on top of the Filter (16). Next, press the Filter Cover
(8) into the spa until it is fully seated. Then, tighten
the Locking Ring (19) onto the spa.
3
19
8
33
Remove the two warning decals (not shown) from
the spa shell. Using a damp cloth, wipe the spa shell
clean. Before filling the spa, make sure that it is
in the desired position and that there is room to
easily service the spa. Once the spa is filled, it
will have to be drained before it can be moved.
16
Fill to Here
Turn the Air Vent (29) counterclockwise to open
it. Using a garden hose or other clean water source,
begin filling spa. Do not use soft water. The spa
may be filled with cold water; however, if warm or
hot water is used, the spa will be ready for use
sooner. Fill the spa until the water is at the level
shown at the right. Do not overfill the spa.
29
Turn the Air Vent (29) clockwise to close it.
4. Attach the nozzle of the included air pump to the
valves on the Inflatable Cover (4). Fill the Inflatable
Cover with air. Do not overfill the Inflatable Cover.
4
4
Loop
Cutout
Slide one of the straps on the inside of the Spa
Cover (11) through one of the loops on the Inflatable
Cover (4). Attach the latch on the strap to the buckle
on the other end of the strap. Make sure that the
cutout in the Inflatable Cover is lined up with the
warning label on the Spa Cover. Attach the other
three straps on the inside of the Spa Cover through
the loops on the Inflatable Cover in the same way.
Place the Spa Cover over the spa and line up the
cutout in the Inflatable Cover with the Console (not
shown).
Buckle
Strap
Latch
11
Warning
Label
5. Pull down one of the straps on the Spa Cover (11)
and hold the Buckle (30) against one of the wood
panels on the spa. (Note: To position the Buckle cor-
rectly, have a second person hold the strap on the
opposite side of the Spa Cover tight.) The Spa
Cover must be tight. Do not place the Buckle
over the grooves between the wood panels. Refer
to the inset drawing. Remove the latch from the
Buckle (30). Attach the Buckle to the wood panel with
two #4 x 3/4Ó Screws (31). Note: It may be helpful
to use a drill with a 1/16Ó bit to make starter holes
in the wood panel. It may also be helpful to apply
a little soap or wax to the screw threads.
5
11
Strap
Latch
30
31
Attach the other five Buckles (30) to the wood panels
in the same way.
Strap
Remove the Spa Cover (11) and the Inflatable Cover
(not shown) from the spa.
30
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Hydrotherapy Spa
The hydrotherapy spa is designed to seat five adults.
The spa holds 225 gallons of water and offers a heat-
ing system (70¡F to 104¡F), a filtration system, ten
adjustable hydrotherapy jets, and a powerful whirlpool
jet. Follow the guidelines below to use and maintain
the spa for your long-term enjoyment.
TESTING AND TREATING THE WATER
The hydrotherapy spa comes with a starter chemical
pack for maintaining the water in the spa. Disregard
the directions on the individual packages of ÒQUICK
pHix It DOWNÓ and ÒQUICK pHix It UP.Ó However, the
directions on the bottle of ÒNon-chlorine ShoxÓ and
ÒBromine BaseÓ are correct. Always keep the chemi-
cals away from children and pets.
PLUGGING IN THE HYDROTHERAPY SPA
Important: The hydrotherapy spa is equipped with a
120/240V convertible electronics package. Operation
at 240V will allow the heater to run more efficiently
and less often. Conversion of the spa to 240V oper-
ation must be performed only by a qualified,
licensed electrician and must comply with all
local, state, and federal electrical codes. Please
refer to the instructions on the inside of the electronics
package for information about converting the spa to
240V operation.
The first time you use the spa, you should test and
treat the water. You must also treat the water each
time you refill the spa. Once you have verified that
the spa is functioning properly, and have allowed the
water to circulate for a while, you should remove the
spa cover and add 1/3 of the ÒBromine BaseÓ bottle,
and 1/3 of the ÒNon-chlorine ShoxÓ bottle to the water
in the spa. Allow the water to circulate for five min-
utes. You should now test the pH level of the water by
using the included test strips. Refer to the test strip
packaging for instructions on using the test strips. The
pH reading should be between 7.2 and 7.8.
Once the hydrotherapy spa is filled with water, the
power cord can be plugged in and the spa can be
turned on. Note: The first time the power cord is
plugged in, the spa will turn on automatically.
If the level is too low, add half of one of the ÒQUICK
pHix It UPÓ packets to the water. Let the water circu-
late through the spa for five minutes. Test the pH level
again. Repeat until the pH level is correct.
When connecting the power cord, plug the power cord
directly into a grounded circuit capable of carrying 15
or more amps. No other appliance should be on the
same circuit. Replace the power cord immediately if it
becomes damaged.
If the level is too high, add half of one of the ÒQUICK
pHix It DOWNÓ packets to the water. Let the water cir-
culate through the spa for five minutes. Test the pH
level again. Repeat until the pH level is correct.
The power
cord is
equipped
with a
Ground
Test and
Reset
Buttons
GFCI
See WATER CHEMISTRY on page 14 for information
concerning proper water maintenance.
Fault Circuit
Interrupter
(GFCI). You
should
always test
the GFCI
before using
the hydro-
STARTING THE HYDROTHERAPY SPA
Once you have tested the GFCI, you should verify the
water flow from the pumping unit. Set the air control
on the console to the lowest setting (see USING THE
CONTROLS on page 12). The pumping unit will heat
the water as it pumps. Cover the hydrotherapy spa
with the spa cover. The spa cover must be tight
(see SECURING THE SPA COVER ON THE SPA on
page 11). The water will heat at about 1.8¡F per hour
with the cover on. If you are using the spa indoors,
and the room temperature is maintained at 70¡F, it will
take approximately 24 to 36 hours for the water to
reach the set temperature.
Grounded circuit
capable of carrying
15 or more amps
therapy spa. First, turn on the spa by pressing the jet
button on the console (see USING THE CONTROLS
on page 12). Once the spa is running, press the GFCI
ÒtestÓ button. The spa should shut off. Press the
ÒresetÓ button. The spa should resume normal opera-
tion. If the spa continues to run after the ÒtestÓ button
is pressed, the GFCI is damaged. Do not use the spa
until the GFCI has been repaired or replaced by a
qualified electrician.
The temperature and the water flow can be set or
changed with the controls on the console (see USING
THE CONTROLS on page 12).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Spa Shell Diagram
H
I
G
C
J
A
A
B
D
E
F
Refer to the diagram above. The function of each
component is explained below.
H. The filter can be removed for cleaning or replace-
ment (see CHECKING AND CLEANING THE FIL-
TER on page 13).
A. The ten hydrotherapy jets provide a relaxing mas-
sage action. Three of the jets are adjustable. Note:
The adjustable jets can be closed and opened by
pushing and pulling the nozzles. If no air flows
through the jets when the air control is turned
counterclockwise, simply pull the nozzles slightly.
I. The console controls the spa jets, turns the under-
water light on and off, and adjusts the water temper-
ature setting (see USING THE CONTROLS on page
12).
J. The diverter controls the flow of water through the
hydrotherapy jets and the whirlpool jet (see USING
THE CONTROLS on page 12).
B. The whirlpool jet directs a flow of water that cre-
ates a whirlpool action in the spa.
C. The skimmer cleans the surface of the water.
SECURING THE SPA COVER ON THE SPA
D. The temperature probe reads the temperature of
the water.
To secure the spa
cover, snap the latch-
es on the spa cover
into the buckles on the
wood panels.
Latch
Key
E. The underwater light can be used for night opera-
tion (see USING THE CONTROLS on page 12).
F. The suction vents near the floor of the spa bring
water into the pump in order to operate the system.
The covers should always be in place over the suc-
tion vents. Never operate the spa without the
suction covers in place.
The buckles can be
locked by inserting the
key and turning it
clockwise 1/4 turn. To
unlock the buckles,
insert the key and turn
Buckle
G. The air control determines the amount of air flowing
through the spa jets during operation (see USING
THE CONTROLS on page 12).
it counterclockwise 1/4 turn. Always keep the buckles
locked when the spa is not in use. Keep the keys
in a safe place, out of the reach of children.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Controls
Air Control
Jet Light
Button Button
Temperature
Buttons
Diverter
Refer to the diagram above. The function of each
control is explained below:
Light Button: Turns the underwater light on and off.
Temperature Buttons: Control the temperature setting
of the water. The temperature can be set at 70¡F to
104¡F. The water heats at about 1.8¡F per hour with
the cover on. Use a medical or other accurate ther-
mometer to check the temperature of the water. Note:
The word ÒCOOLÓ will appear in the console display if
the temperature of the water is more than 20¡F cooler
than the set temperature. When this happens, the
heater will automatically activate to warm the water.
The word ÒICEÓ will appear in the display if the tem-
perature drops below 40¡F. If this happens, the pump
will automatically circulate the water and warm the
plumbing to keep the water from freezing.
Air Control: Determines the amount of air flowing
through the hydrotherapy jets during operation. If the
control is turned counterclockwise, the amount of air
flowing through the jets will increase. If the control is
turned clockwise, the amount of air will decrease.
Diverter: Controls the flow of water through the
hydrotherapy jets and the whirlpool jet. When the
diverter is turned fully clockwise, the flow will be
through the whirlpool jet; when the diverter is turned
fully counterclockwise, the flow will be through the
hydrotherapy jets; when the diverter is halfway
between the clockwise and counterclockwise posi-
tions, the flow will be evenly distributed through the
whirlpool jet and the hydrotherapy jets.
The temperature buttons can also be used to change
the filter cycle time. First, press either of the tempera-
ture buttons. While the console display is flashing,
press the jet button. The letters ÒFCÓ should appear in
the display. Next, press the temperature buttons to
select a 2-, 4-, or 6-hour filter cycle time. Then, press
the jet button again. If the filter cycle time is not
changed, it will default to 2 hours.
Jet Button: Turns the spa jets on and off. If the but-
ton is pressed once, the spa jets will run at low speed,
providing gentle hydrotherapy. If the button is pressed
again, the jets will run at high speed, providing more
intense hydrotherapy. If the button is pressed a third
time, the jets will shut off.
The spa also features an automatic mode that heats
and filters the water when the spa is left unattended.
When the spa is first plugged in, or if the buttons on
the console have not been pressed for longer than
twenty minutes, the automatic mode will begin filtering
or heating the water as needed. Note: To keep the
filter and heat cycles from running, the power
cord must be unplugged.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
The hydrotherapy spa is designed to provide years of
enjoyment. Please follow the guidelines below to
properly maintain your spa.
MAINTAINING THE SPA COVER
The spa cover should be cleaned monthly. To clean
the spa cover, use water and a non-abrasive cleaner
on the entire cover. Rinse the cover with a garden
hose to remove any cleaner residue. Dry the cover
entirely. Use a non-silicone-based vinyl conditioner on
the cover after you clean it. This will help protect the
cover from sun damage.
MAINTENANCE SCHEDULE
Daily
¥ Check the water level and refill the spa to the level
shown in step 3 on page 9.
¥ Check the pH balance and sanitizer level. Adjust if
necessary (see WATER CHEMISTRY on page 14).
¥ Clean the surface of the water with a skimming net.
SANITIZING THE HYDROTHERAPY SPA
Please refer to your local pool and spa supplier for
information concerning which chemicals you should
use in your area to sanitize the spa.
Weekly
¥ Clean the spa shell at the waterline.
¥ Check and thoroughly clean the filter (see CHECK-
ING AND CLEANING THE FILTER on this page).
¥ Replace the filter if needed (see ORDERING
REPLACEMENT PARTS on the back cover).
The most common sanitizing agent is a solid bromine
concentrate. The amount required varies according to
several factors, such as user load, temperature, water
conditions etc. Proper water maintenance is a fairly
complex process. We recommend that you contact
your local pool and spa supplier for information on
how you should best accomplish this.
Monthly
¥ Clean the spa cover (see MAINTAINING THE SPA
COVER on this page).
¥ Soak the filter for two hours in a trisodium phos-
phate (TSP) solution. Rinse the filter in clean water.
¥ Replace the filter if needed (see ORDERING
REPLACEMENT PARTS on the back cover).
CHECKING AND CLEANING THE FILTER
The filter should be checked periodically for build-up
of dirt and oil. If the filter needs to be cleaned, follow
the steps below:
Every Three Months
¥ Drain the spa and refill it with clean water. Sanitize
and test the pH of the water.
1. Turn off the power.
Locking
Ring
¥ Check for any leaks around the pump or joints in
the pipes. The seals will wear out over time; detect-
ing leaks early can reduce repair costs.
¥ Clean the interior of the spa. Do not use solvents or
waxes.
2. Turn the air vent
counterclockwise to
open it.
3. Unscrew the locking
ring and pull out the
filter cover.
4. Lift the top filter gas-
ket and the filter out
of the filter housing.
5. Check the filter for
dirt and debris. If the
filter needs to be
Filter
Cover
Air
Vent
Filter
Gasket
Every Six Months
¥ Treat the exterior with a wood sealant (see MAIN-
TAINING THE SPA EXTERIOR below).
Filter
MAINTAINING THE SPA EXTERIOR
The WeatherWoodª surround has been treated at
the factory. For information and supplies to maintain
the beauty and color of your WeatherWoodª sur-
round, call our Customer Service Department toll-free
at 1-877-897-7493.
cleaned, rinse the fil-
ter with a hose. If the
filter is still dirty, soak
it in cleaning solution
from a pool and spa
supply store.
Filter
Housing
CLEANING THE SPA SHELL
6. Inspect the filter for
damage. Replace the filter if it is damaged.
The spa shell should be cleaned with a mild soap
solution; do not use solvents. The spa should always
be clean and dry before being moved or stored.
7. Insert the cleaned or new filter and the top filter
gasket into the filter housing.
8. Re-attach the filter cover and the locking ring.
9. Turn the air vent clockwise to close it.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
WATER CHEMISTRY
ATTACHING AND REMOVING THE ACCESS PANEL
The hydrotherapy spa comes with a starter chemical
pack for maintaining the water in the spa. (See TEST-
ING AND TREATING THE WATER on page 10.)
Additional chemicals can be purchased at a pool and
spa supply store.
To locate the access panel, refer to the drawing on
page 6. To remove the access panel, first remove the
four indicated screws. Slide the access panel down
and then pull the bottom of it away from the spa. Be
careful not to damage the spa shell as you
remove the access panel.
CAUTION: The chemicals used to maintain the pH
balance of the water and to sanitize the water can
be dangerous. Always follow these basic guide-
lines when handling the chemicals:
1. Always read and follow the directions on the
label, unless directed otherwise.
Access
Panel
2. Never mix different chemicals.
3. Do not exceed the recommended amounts of
chemicalsÑfollow the directions on the label
closely.
4. Keep all chemicals out of the reach of children
and pets.
5. Keep all containers closed tightly when not in
use.
6. Never add water to the chemicalsÑalways add
the chemicals to the water as directed.
7. Always store chemicals in a cool, dry place.
Screws
To replace the access panel, insert the top of the
access panel under the edge of the spa shell. Slide
the cover up until the bottom of the access panel
clears the trim along the bottom of the spa. Then,
slide the access panel into place and re-attach the
four screws.
MAINTAINING THE PROPER PH BALANCE
The pH factor is a measure of the relative acidity or
alkalinity in the water. It is measured on a scale of 1
to 14. Pure water has a value of 7, which is neutral.
Any value above 7 is alkaline, and any value below 7
is acidic. You should maintain a slightly alkaline pH
level, between 7.2 and 7.8, in the hydrotherapy spa.
DRAINING THE HYDROTHERAPY SPA
The hydrotherapy spa should be drained at least four
times a year and refilled with clean water. You may
need to drain the spa more often, depending on the
user load. This must be done because after repeated
chemical treatment the water becomes chemically
saturated. Once this happens, additional chemical
treatment of the water is no longer effective. The spa
should also be drained if you will not be using it for
long periods of time. The spa must always be drained
before major repairs are made.
Severe problems can occur when the pH balance is
not maintained within this range. If the pH level
exceeds 7.8, dissolved minerals can build up and clog
the plumbing in the spa jet unit. If the pH level falls
below 7.2, the acid level in the water will begin to cor-
rode the metal parts in the spa jet unit. Also, the sani-
tation agents in the water will not be effective if the pH
level is not properly maintained. Damage caused by
improper pH levels is not covered under the warranty.
The hydrotherapy spa should always be covered
when it is empty. Direct sunlight can cause exten-
sive damage. The surface of the spa shell can
reach temperatures as high as 150¡F in a matter
of minutes if exposed to the sun while it is empty.
These high temperatures can cause significant
damage, such as blistering of the shell surface
and warping of the spa shell. Any damage caused
by sun exposure is not covered under warranty.
To maintain the proper pH level, you should test the
pH of the water regularly. To test the water, you can
either purchase additional test strips or purchase a pH
test kit at a pool and spa supply store. The pH read-
ing should be between 7.2 and 7.8. If the level is too
low, add a pH increaser (usually soda ash). If the
level is too high, add a pH reducer (usually sodium
bisulfate). Test the water again after five minutes. See
the instructions with your pH test kit for additional
information about testing and adjusting the pH.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
To drain the hydrotherapy spa, follow the steps below:
WINTER USE AND CARE
1. Using the console, adjust the temperature to the
lowest setting.
The hydrotherapy spa is designed for year-round use.
If you decide to store the spa for the winter, store it in
a warm, dry location. Follow the steps below to winter-
ize the spa.
1. Drain the spa (see DRAINING THE HYDROTHER-
APY SPA on the previous page and this page).
2. Remove all remaining water from the spa shell. Dry
the spa shell with towels.
2. Shut off the circuit breaker or GFCI.
3. Remove the access panel from the spa.
4. Remove the end of the drain hose from the spa.
Remove the cap and attach a garden hose to the
drain hose.
3. Set the air control to the lowest setting. Use a
wet/dry vacuum to pull any remaining water from
the system. To do this, place the vacuum nozzle
over each jet, starting with the highest jet and fin-
ishing with the lowest jet.
4. Set the air control on the console to the highest
setting and repeat step 3.
5. Drain the pump (see DRAINING THE PUMP on
this page). Once the water is drained from the
pump, place the vacuum nozzle over the drainage
hole in the pump and vacuum any additional water
from the pump. Note: For additional protection,
remove the pump/motor from the spa and store
it in a climate-controlled room.
Drain
Hose
Valve
Knob
Cap
6. Clean the spa shell (see page 13).
7. Clean the filter (see page 13).
8. A qualified electrician should disconnect the power
cord from the 240V power source.
9. Re-attach the access panel and the spa cover.
5. Open the valve by turning the valve knob. The
water will begin to drain.
6. When the spa is empty, close the valve and
remove the garden hose. Re-attach the cap and
return the drain hose to the clip inside the spa.
7. Re-attach the access panel.
8. Refill the spa and treat the water with chemicals
(see pages 10 and 14).
REPLACING THE LIGHT BULB
If the underwater light burns out, you will need to
remove the access panel to replace it (see ATTACHING
AND REMOVING THE ACCESS PANEL on page 14).
Next, locate the light housing. Turn the light housing
counterclockwise and remove it from the spa shell.
DRAINING THE PUMP
After the hydrotherapy
spa is drained (see
DRAINING THE
Light Housing
Light
Bulb
HYDROTHERAPY SPA
on page 14), the pump
should also be drained
if the hydrotherapy spa
will be stored for more
than thirty days or if it
may be exposed to
freezing temperatures.
Light
Housing
Drain Plug
To replace the light bulb, pull the old light bulb out of
the housing and insert a new light bulb. Re-attach the
light housing to the spa shell. Re-attach the access
panel to the spa.
To drain the pump, remove the access panel from the
spa unit (see ATTACHING AND REMOVING THE
ACCESS PANEL on page 14). Locate the pump inside
the spa unit. Remove the drain plug from the pump
and allow all water to drain from the pump. Replace
the drain plug.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble-shooting
Most problems can be solved by following the simple steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at
1-877-897-7493, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time.
1. SYMPTOM: THE SPA WILL NOT OPERATE
tained at 70¡F, it will take approximately 24 to
36 hours for the water to reach the set temper-
ature.
a. Check to see if the GFCI breaker is tripped or
was not turned on. Reset the GFCI breaker.
b. If you are using the hydrotherapy spa outdoors,
it may take longer for the water to heat. See
the chart below for the approximate heating
time.
2. SYMPTOM: THE CIRCUIT BREAKER OR THE
GFCI TRIPS WHILE THE SPA IS OPERATING
a. Reset the circuit breaker or the GFCI. If the cir-
cuit breaker or the GFCI trips again, contact a
qualified electrician for service.
Air TemperatureHeating Time
+
70¡F
50¡FÐ70¡F
30¡FÐ50¡F
16 to 24 hours
1 to 2 days
2 to 4 days
3. SYMPTOM: THE PUMP HUMS
a. The filter may be dirty or damaged. Remove
the filter from the filter housing and clean or
replace the filter (see page 13).
b. If the water still has not heated after four days,
contact our customer service department.
7. SYMPTOM: THE WATER IS NOT BEING
CLEANED BY THE FILTER
b. The pump may have a foreign object stuck in
the impeller. Contact our customer service
department.
a. Check to see if the filter is in place. Clean the
filter if it is dirty.
c. The pump may have a loose wire connection.
Contact our customer service department.
b. Check the chemical balance of the water. If the
pH is incorrect, the sanitizing agents will not
function properly.
4. SYMPTOM: THE PUMP HUMS, BUT DOES NOT
ROTATE
8. SYMPTOM: THE WATER PULSATES OR
THERE IS MINIMUM WATER FLOW
a. The pump may be jammed. Contact our cus-
tomer service department. If your spa is no
longer under warranty, contact a local spa and
pool service provider.
a. This usually occurs only when the water level is
low. Add water until the jets are covered (see
step 3 on page 9).
5. SYMPTOM: THE PUMP IS NOISY WHILE
OPERATING
9. SYMPTOM: THE WATER LEVEL DROPS
a. There may be debris in the pump. Contact our
customer service department.
a. Some water loss due to evaporation is normal.
If rapid water loss occurs, or if you notice wet-
ness on the floor around the hydrotherapy spa,
the spa shell may have a leak. Contact your
local pool and spa service provider for repairs.
b. The pump may have a bad bearing. Contact
our customer service department.
6. SYMPTOM: THE WATER DOES NOT HEAT
b. A clamp or seal inside the pump compartment
may be loose. Check inside the pump compart-
ment for excess water and watch the pump unit
while it is operating to see if water drips from
any of the plumbing. If you can identify the
location of the leak inside the spa jet unit, tight-
en the clamp or replace the damaged seal.
a. Make sure that the hydrotherapy spa is fully
covered with the spa cover. The spa cover
must be tight for the water to heat. Set the
air control to low. The water will heat at a rate
of 1.8¡F per hour. If you are using the spa
indoors and the room temperature is main-
16
Download from Www.Somanuals.com. All Manuals Search And Download.
10. SYMPTOM: THE SPA JET UNIT CONTINUES
TO RUN AFTER IT HAS BEEN SHUT OFF
12. SYMPTOM: THE CONSOLE DISPLAYS THE
WORDS ÒCOOLÓ OR ÒICEÓ
a. To turn the spa jets on low, press the jet button
once. To turn the spa jets on high, press the jet
button twice. To turn the spa jets off, press the
button three times. The spa jets will remain off
for two hours, at which time they will begin run-
ning the filter cycle. At any time after the spa
jets have been shut off, the pump will begin
cycling the water if the temperature falls below
the minimum setting. Note: If the water tem-
perature is already below the minimum set-
ting, the pump will not shut off.
a. This is a normal function of the spa; no action
is necessary. The word ÒCOOLÓ will appear in
the display if the temperature of the water is
more than 20¡F cooler than the set tempera-
ture. If this happens, the heater will automati-
cally activate to warm the water. The word
ÒICEÓ will appear if the temperature drops
below 40¡F. If this happens, the pump will auto-
matically circulate the water and warm the
plumbing.
13. SYMPTOM: THE CONSOLE DISPLAYS ONE OF
THE FOLLOWING MESSAGES: ÒOH,Ó Ò5n1,Ó
Ò5n3,Ó ÒFLO,Ó ÒPd,Ó ÒO3,Ó ÒPH50,Ó ÒPH90,Ó or
ÒILOCÓ
11. SYMPTOM: NO AIR FLOWS THROUGH THE
ADJUSTABLE HYDROTHERAPY JETS WHEN
THE AIR CONTROL IS TURNED COUNTER-
CLOCKWISE
a. If the console displays one of the messages
listed above, or if the console does not function
properly, contact our customer service depart-
ment.
a. The three adjustable hydrotherapy jets can be
closed and opened by pushing and pulling the
nozzles. If no air flows through the hydrotherapy
jets when the air control is turned counterclock-
wise, simply pull the nozzles slightly.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
R0300A
Part ListÑModel No. IMHS45590
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
1
1
1
1
4
2
4
1
1
3
1
2
2
1
1
1
2
2
1
1
1
1
1
4
1
Compression Fitting Assembly
Access Panel
Whirlpool Jet
Inflatable Cover
#8 x 5/8Ó Screw
Removable Collar
#6 x 1 1/4Ó Wood Screw
Filter Cover w/O-ring
Spa Shell
1/4Ó Whirly Jet
Spa Cover
Heater Gasket
Rubber Pump O-ring
Heater Assembly
Skimmer Grill w/Screws
Filter
26
27
28
29
30
31
32
33
34
35
#
#
#
#
#
#
#
#
#
3
1
1
1
6
12
1
2
1
4
1
2
1
1
2
1
1
1
1
1
1
1
8
Push/Pull Movable Jet
Drain Plug
Drain Plug O-ring
Air Vent
Buckle
#4 x 3/4Ó Screw
Air Vent O-ring
Filter Gasket
Air Control Knob
1/4Ó x 1 1/4Ó Bolt
Ground Wire
Ground Wire Bracket
Water Treatment Kit
Water Test Strip
Key
UserÕs Manual
Large Warning Sign
Warning Sign
Foot Pump
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
#10 x 1 1/4Ó Screw
Suction Cover
Locking Ring
Pump Motor
#
#
#
#
Light Cover, Red
Light Cover, Blue
Light Bulb
Pump Motor Power Cord
Rubber Grommet
Light Cover
5/16Ó Lock Washer
Diverter Knob
Side Panel
Note: Ò#Ó indicates a non-illustrated part. Specifications are subject to change without notice.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
R0300A
Exploded DrawingÑModel No. IMHS45590
11
35
22
20
13
24
13
28
27
4
29
21
19
8
32
33
16
7
12
7
25
33
2
5
34
6
14
9
12
6
5
26
10
15
10
3
23
18
18
17
26
10
1
31
30
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Ordering Replacement Parts
To order replacement parts, simply call our Customer Service Department toll-free at 1-877-897-7493, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre-
pared to give the following information when calling:
1. The MODEL NUMBER of the product (IMHS45590)
2. The NAME of the product (IMAGE¨ RENEW 455)
3. The SERIAL NUMBER of the product (see the front cover of this manual)
4. The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST and EXPLODED DRAWING
on pages 18 and 19).
Limited Warranty
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and mate-
rial. ICON warrants the spa shell for five (5) years. The pump and motor are covered for two (2) years. All other
parts are covered for ninety (90) days. This warranty extends only to the original purchaser. ICON's obligation
under this warranty is limited to replacing or repairing, at ICON's option, the product at one of its authorized
service centers. All products for which warranty claim is made must be received by ICON at one of its autho-
rized service centers with all freight and other transportation charges prepaid, accompanied by sufficient proof
of purchase. All returns must be pre-authorized by ICON. This warranty does not extend to any product or
damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage,
or repairs not provided by ICON authorized service personnel, to products used for commercial or rental pur-
poses, or to products used as store display models. Specifically excluded are damages caused by or attrib-
utable to the following incidents: any damage to the wood exterior resulting from improper maintenance, or
any damage to the wood or tile exterior attributable to freight mishandling; damage resulting from improper
winterization; damage to the spa shell resulting from improper chemical treatment, damage to the spa shell
resulting from exposure to extreme temperatures, or damage to the spa shell resulting from exposure to direct
sunlight and ultraviolet rays while the spa is empty; damage to the pump, motor, plumbing, and components
due to improper maintenance, chemical treatment, or exposure; damage resulting from failure to properly fol-
low userÕs manual installation, operation, or maintenance instructions. Also excluded are consumable com-
ponents, including but not restricted to filter cartridges and light bulbs. No other warranty beyond that specif-
ically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in connection
with the use or performance of the product or damages with respect to any economic loss, loss of or damage
to property including water damage, loss of revenues or profits, loss of enjoyment or use, costs of removal,
installation or other consequential damages of whatsoever nature. Some states do not allow the exclusion or
limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer-
chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation
may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 162379 R0300A
Printed in USA © 2000 ICON Health & Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|