Color Monitor
C220p
User’s Guide
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Connecting your monitor......................................................................................... 6
Workplace preparation............................................................................................ 7
Height.................................................................................................................. 7
Rest..................................................................................................................... 7
Hands.................................................................................................................. 7
User controls..................................................................................................... 11
Main OSD menu controls.................................................................................. 12
OSD functions................................................................................................... 12
Power Management.......................................................................................... 16
Further help....................................................................................................... 18
Specifications........................................................................................................ 20
Notices and Trademarks....................................................................................... 22
Trademarks....................................................................................................... 23
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Always observe the following precautions to reduce the risk of injury and property damage.
Do not attempt to service a product yourself unless instructed to do so by the IBM HelpCenter.
Use only an IBM authorized service provider who is approved to repair your particular product.
Note: Some parts can be upgraded or replaced by the customer. These parts are referred to
as Customer Replaceable Units, or CRUs. IBM expressly identifies CRUs as such, and
provides documentation with instructions when it is appropriate for customers to replace those
parts. You must closely follow all instructions when performing such replacements. Always
make sure that the power is turned off and that the product is unplugged from any power
source before you attempt the replacement. If you have any questions or concerns, contact
the IBM HelpCenter.
Use only the power cords and power adapters supplied by the product manufacturer.
Never wrap a power cord around the power adapter or other object. Doing so can stress the
cord in ways that can cause the cord to fray, crack or crimp. This can present a safety hazard.
Always route power cords so that they will not be walked on, tripped over, or pinched by
objects.
Protect the cord and power adapters from liquids. For instance, do not leave your cord or
power adapter near sinks, tubs, toilets, or on floors that are cleaned with liquid cleansers.
Liquids can cause a short circuit, particularly if the cord or power adapter has been stressed
by misuse. Liquids can also cause gradual corrosion of the power cord terminals and/or the
connector terminals on the adapter which can eventually result in overheating.
Always connect power cords and signal cables in the correct order and ensure that all power
cord connectors are securely and completely plugged into receptacles.
Do not use any power adapter that shows corrosion at the ac input pins and/or shows signs of
overheating (such as deformed plastic) at the ac input or anywhere on the power adapter.
Do not use any power cords where the electrical contacts on either end show signs of
corrosion or overheating or where the power cord appears to have been damaged in any way.
Ensure that extension cords, surge protectors, uninterruptible power supplies, and power
strips that you use are rated to handle the electrical requirements of the product. Never
overload these devices. If power strips are used, the load should not exceed the power strip
input rating. Consult an electrician for more information if you have questions about power
loads, power requirements, and input ratings.
If a receptacle (power outlet) that you intend to use with your computer equipment appears to
be damaged or corroded, do not use the outlet until it is replaced by a qualified electrician.
Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain a
replacement.
Some products are equipped with a three-pronged plug. This plug fits only into a grounded
electrical outlet. This is a safety feature. Do not defeat this safety feature by trying to insert it
into a non-grounded outlet. If you cannot insert the plug into the outlet, contact an electrician
for an approved outlet adapter or to replace the outlet with one that enables this safety feature.
Never overload an electrical outlet. The overall system load should not exceed 80 percent of
the branch circuit rating. Consult an electrician for more information if you have questions
about power loads and branch circuit ratings.
Be sure that the power outlet you are using is properly wired, easily accessible, and located
close to the equipment. Do not fully extend power cords in a way that will stress the cords.
Connect and disconnect the equipment from the electrical outlet carefully
4
Download from Www.Somanuals.com. All Manuals Search And Download.
All IBM personal computers contain a non-rechargeable coin cell battery to provide power to
the system clock. In addition many mobile products such as Thinkpad notebook PCs utilize a
rechargeable battery pack to provide system power when in portable mode. Batteries
supplied by IBM for use with your product have been tested for compatibility and should only
be replaced with IBM approved parts.
Never attempt to open or service any battery. Do not crush, puncture, or incinerate batteries
or short circuit the metal contacts. Do not expose the battery to water or other liquids. Only
recharge the battery pack strictly according to instructions included in the product
documentation.
Battery abuse or mishandling can cause the battery to overheat, which can cause gasses or
flame to “vent” from the battery pack or coin cell. If your battery is damaged, or if you notice
any discharge from your battery or the buildup of foreign materials on the battery leads, stop
using the battery and obtain a replacement from the battery manufacturer.
Batteries can degrade when they are left unused for long periods of time. For some
rechargeable batteries (particularly Lithium Ion batteries), leaving a battery unused in a
discharged state could increase the risk of a battery short circuit, which could shorten the life
of the battery and can also pose a safety hazard. Do not let rechargeable Lithium-Ion
batteries completely discharge or store these batteries in a discharged state.
Computers generate heat when turned on and when batteries are charging. Notebook PCs
can generate a significant amount of heat due to their compact size. Always follow these
basic precautions:
•
Do not leave the base of your computer in contact with your lap or any part of your
body for an extended period when the computer is functioning or when the battery is
charging. Your computer produces some heat during normal operation. Extended
contact with the body could cause discomfort or, potentially, a skin burn.
Do not operate your computer or charge the battery near flammable materials or in
explosive environments.
Ventilation slots, fans and/or heat sinks are provided with the product for safety,
comfort, and reliable operation. These features might inadvertently become blocked by
placing the product on a bed, sofa, carpet, or other flexible surface. Never block, cover
or disable these features.
•
•
CD and DVD drives spin discs at a high speed. If a CD or DVD is cracked or otherwise
physically damaged, it is possible for the disc to break apart or even shatter when the CD
drive is in use. To protect against possible injury due to this situation, and to reduce the risk of
damage to your machine, do the following:
•
•
•
•
•
Always store CD/DVD discs in their original packaging
Always store CD/DVD discs out of direct sunlight and away from direct heat sources
Remove CD/DVD discs from the computer when not in use
Do not bend or flex CD/DVD discs, or force them into the computer or their packaging
Check CD/DVD discs for cracks before each use. Do not use cracked or damaged discs
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Important: Before connecting the monitor, turn off the computer and attached devices. Also,
ensure the power at the electrical outlet matches the power requirements of the monitor.
Refer to the “Specifications” section on page 20 for more details.
Connecting your monitor
1. Connect the signal cable to the video port on the back of your computer. Your
computer may have a video adapter card installed. In this case, attach the signal
cable to the connector on the video adapter card.
2. Connect the power cord to the monitor first, and then firmly insert the plug into a
properly grounded electrical outlet.
3. Turn on the monitor, and then the computer.
If your monitor does not seem to be working correctly, refer to the “Troubleshooting” section
on page 17 for help.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Workplace preparation
Positioning the monitor
Choose a suitable place to position the monitor where it is not near fluorescent desk lighting
or any equipment that produces magnetic fields that could cause interference. Ensure that the
furniture or equipment can support the weight of the monitor. Allow at least 2 inches (50mm)
of ventilation space around the monitor.
Height
Position the monitor so that the top of the screen is slightly below your eye level when you sit
at your workstation.
Orientation
Choose a position that gives the least reflection from lights and windows, usually at a right
angle to any windows. Position the monitor directly in front of you so that you do not have to
twist your body. Tilt the monitor to a comfortable viewing angle.
Working practices
Rest
Take regular breaks. Vary your posture, and stand up and stretch occasionally, as prolonged
use of computer workstations can be tiring.
Back
Sit back in the chair and use the backrest.
Hands
Use a light touch on the keyboard, keeping your hands and fingers relaxed. Allow a space in
front of the keyboard to rest your wrists when not typing. Consider using a wrist pad.
Eyesight
Working with monitors, in common with any prolonged close work, can be visually demanding.
Look away from the screen periodically and have your eyesight checked regularly.
Screen settings
Set the screen brightness and contrast to a comfortable level. You may have to adjust this as
the lighting changes during the day. Many application programs let you select color
combinations, which can help you to view in comfort.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the device driver
This section provides instructions for installing the device driver in Microsoft® Windows® 95,
Windows 98, Windows 2000, Windows Millennium Edition (Me), and Windows XP.
Installing the device driver for Windows 95 or Windows 98
To install the device driver in Microsoft Windows 95 or Windows 98, do the following:
Note: You must download files from the IBM Monitor CD to use the Plug and Play feature in
Windows 95 or Windows 98.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
95 or Windows 98 operating system.
Your computer’s Plug and Play code might warn you that your system
hardware has changed. This means that it has detected your new
monitor for the first time.
4. Open the Display Properties window by clicking Start, Settings,
Control Panel and then double clicking on the Display icon.
5. Click the Settings tab.
6. If you are using Windows 95, do the following:
1. Click the Change Display Type button.
2. Click the Change Monitor Type button.
If you are using Windows 98, do the following:
1. Click the Advanced button.
2. Click the Monitor tab.
3. Open the Upgrade Device Wizard window by clicking
on the Change button and then select the Next button.
4. Click Display a list of the known drivers for this device so that
I can choose a specific driver and then select the Next button.
7. Insert the IBM Monitor CD into the CD drive and click the Have Disk button.
8. Click OK.
9. Ensure that the CD drive letter is selected, and then select the DRIVERS folder.
10. Select IBM C220p CRT monitor and click OK. The files will be copied from
the CD to your hard disk drive.
11. Close all open windows and remove the CD.
12. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the device driver for Windows 2000 or Windows Me
To install the device driver in Microsoft Windows 2000 Professional or Microsoft Windows
Millennium Edition (Me), do the following:
Note: You must download files from the IBM Monitor CD to use the Plug and Play feature in
Windows 2000 or Windows Me.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
2000 or Windows Me operating system.
4. Open the Display Properties window by clicking Start, Settings,
Control Panel and then double-clicking the Display icon.
5. Click the Settings tab.
6. Click the Advanced button.
7. Click the Monitor tab.
8. Click the Properties button.
9. Click the Driver tab.
10. Open the Upgrade Device Driver Wizard window by clicking on Update Driver and then
click the Next button.
11. Select Display a list of the known drivers for this device so that I can choose a
specific driver and then click the Next button.
12. Insert the IBM Monitor CD into the CD drive and click the Have Disk button.
13. Click OK.
14. Ensure that the CD drive letter is selected, and then select the DRIVERS folder.
15. Select IBM C220p CRT monitor and click OK. The files will be copied from
the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and corresponding Color
Matching Profiles.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the device driver in Windows XP
To install the device driver in Microsoft Windows XP, do the following:
Note: You must download files from the IBM Monitor CD to use the Plug and Play feature in
Windows XP.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
XP operating system.
4. Open the Display Properties window by clicking Start, Settings,
Control Panel and then double-clicking the Display icon.
5. Click the Settings tab.
6. Click the Advanced button.
7. Click the Monitor tab.
8. Click the Properties button.
9. Click the Driver tab.
10. Open the Hardware Update Wizard window by clicking on Update Driver and then click
the Next button.
11. Select Install from a list or Specific location (Advanced) and then click the Next
button.
12. Insert the IBM Monitor CD into the CD drive and click the Have Disk button.
13. Click OK.
14. Ensure that the CD drive letter is selected, and then select the DRIVERS folder.
15. Select IBM C220p CRT monitor and click OK. The files will be copied from the CD to
your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and corresponding Color
Matching Profiles.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
User controls
The image is already optimized for many display modes. However, the controls can be used
to adjust the image to your liking.
OSD key function
Icon
Control
Power switch
Description
Switches the monitor on and off.
Activates the On-Screen-Display/Select control
icon/Save Adjustment
OSD/OK
Move right;
Brightness adjustment
selection
Moves the highlight to the icon to the right, or on
adjustment screens it increases the effect of the
adjustment.
Move left;
Contrast adjustment
selection
Moves the highlight to the icon to the left, or on
adjustment screens it decreases the effect of the
adjustment.
Hotkey;
Exit
Hotkey for signal input selection, or exit OSD control.
Hotkey functions
Brightness and contrast can be adjusted as follows, without the need to display the OSD:
Select the function and use the buttons to adjust. If adjustment is not made within 15 seconds,
the current settings will be saved and the control screen will disappear automatically.
Icon
Control
Brightness
Description
Adjusts the background brightness
Contrast
Adjusts the contrast between foreground and background
Signal input selection
Select the video signal input, D-Sub or DVI-A.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen-Display
This section provides instructions for activating the On-Screen-Display (OSD) and using the
menu controls and functions.
Activating the On-Screen-Display
The monitor controls are accessed by pressing button “ ” to enable OSD (On-Screen-
Display). The main menu will be displayed as follows.
Each sub-menu icon is selected by highlighting it via the “ ” “ ” control and pressing
button “ ” to select. To exit the main or sub-menu then press the exit button “
”.
Main OSD menu controls
Icon
Control
Image Quality
Function instruction
Adjusts Brightness, Contrast, Moiré, Convergence,
Purity, and Degauss.
Adjusts Horizontal/Vertical Position, Horizontal/Vertical
Size, Zoom, and Rotation.
Adjusts Parallelogram, Trapezoid, Pincushion,
Pincushion balance, and Geometry reset.
Adjusts Preset color point, Custom, and Reset User
color.
Image Position/Size
Image Shape
Color
Adjusts Information, Menu Languages, Accessibility,
Factory Default, Menu Position, and Input Signal.
Options
Exit
Closes the OSD menu.
OSD functions
Note: After a function is selected, use the “ ” and “ ” buttons to increase or decrease the
adjustment. If the OK “ ” or Cancel “ ” button is not pushed within the menu time out
period, the current setup will be saved and the control screen will disappear automatically.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Quality
Image Quality
Sub-menu
Icon
Control
Function
Sub-menu function
Left
Adjusts overall screen
brightness.
Brightness
Right
Left
Adjusts difference
between light and dark
areas.
Reduces elliptical
or wavy interference
patterns.
Contrast
Moiré
Right
/
Horizontal
Vertical
/
Reduces colored shadows
on letters or lines.
Convergence
/
Top Left
Top Right
Bottom Left
Improves the image quality
in the corners.
Purity
Bottom Right
Save
Demagnetizes screen
to reduce image distortion.
Degauss
Yes/No Option
Image Position/Size
Image
Position/Size
Sub-menu
Icon
Control
Horizontal
Function
Sub-menu function
Left
Moves image left or right.
Position
Right
Left
Vertical Position Moves image up or down.
Right
Left
Horizontal Size
Vertical Size
Adjusts image width.
Adjusts image height.
Right
Left
Right
Adjusts image width and
height.
Turns image clockwise or
counterclockwise.
Zoom
/
/
Rotation
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Image shape
Image Shape
Sub-menu
Icon
Control
Function
Sub-menu function
Left
Leans image to the left or
right.
Parallelogram
Right
Left
Adjusts top or bottom
image width.
Trapezoid
Pincushion
Right
Expands or contracts
image sides.
/
/
Pincushion
balance
Moves image center left or
right.
Resets image shape to
original settings.
Geometry reset
Yes/No Option
Color
Color
Sub-menu
Icon
Control
Function
Sub-menu function
Preset Color
Point
Select from standard white With three choices
color.
9300K/6500K/5500K
Adjusts red green and blue
intensity.
Custom
Red/Green/Blue/Save
Reset User
Color
Resets custom
color to original value.
Yes/No Option
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Options
Options
Sub-menu
Icon
Control
Function
Sub-menu function
Shows resolution, refresh
rate, product details.
Information
Changes language of
menu.
English, French, Italian, German,
Spanish
Menu Language
Button repeat
rate
Off/Default/Slow
Option
5/10/15/20/25/30
second options
Accessibility
Changes Menu timings.
Menu time out
Resets monitor to original
settings.
Factory Default
Menu Position
Yes/No Option
Horizontal
Vertical
Save
/
/
Adjusts menu location.
Input Signal
Exit
Select video signal.
Input 1/2
Closes the OSD menu.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Further information
Display modes
The display modes and monitor uses are controlled by the computer. Therefore, refer to your
computer documentation for details on how to change display modes.
The image size, position, and shape may change when the display mode changes. This is
normal and the image can be readjusted using the monitor controls.
To ensure flicker-free operation, select the highest (non-interlaced) refresh rate that both the
computer and the monitor can support, (generally 75 Hz or higher), for the addressability that
your application requires.
For the display modes listed below, the screen image has been optimized during manufacture.
Resolution
640 x 480
Refresh Rate
60Hz
Horizontal Frequency
31.5kHz
720 x 400
70Hz
31.5kHz
1024 x 768
85Hz
68.6kHz
1280 x 1024
85Hz
91.1kHz
1600 x 1200
1920 x 1440
1920 x 1440
2048 x 1536
85Hz
75Hz
85Hz
75Hz
106.3kHz
112.5kHz
128.5kHz
120.5kHz
Table1. Factory Preset Mode
Power Management
To benefit from power management, the monitor must be used in conjunction with a computer
that implements the Video Electronics Standards Association (VESA) Display Power
Management Signalling (DPMS) Standard.
The power management feature is invoked when the computer recognizes that you have not
used your mouse or keyboard for a user-definable period of time. There are several states
described in the table below.
Power
indicator
State
Screen
Restoring Operation
Compliance
On
Off
Green
Amber
Normal
Blank
Press a key or move the mouse.
ENERGY STAR®
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you have a problem setting up or using your monitor, you may be able to solve it yourself.
Before calling your retailer or IBM you should try the suggested actions that are appropriate to
your problem.
Problem
Screen is blank and
power indicator is off.
Possible Cause
No power to monitor.
Suggested Action
Ensure the electrical
outlet and the monitor
are both switched on.
Check power cord is
firmly plugged into the
monitor and the
electrical outlet.
If the power cord plug
has a removable fuse,
replace it.
Reference
Connecting your
monitor starting
on page 6.
•
•
•
•
•
•
Try another power
cord.
Try another electrical
outlet.
Adjust brightness and
contrast.
Screen is blank and
power indicator is
steady green.
Brightness and
Contrast may be too
low.
User controls
section starting
on page 11.
Further
information
starting on page
16.
SIGNAL OUT OF
RANGE message is
displayed.
Display mode of the
computer is outside
the range of the
monitor.
Video cable
connection.
•
•
Reconfigure the
computer to use a
supported display
mode.
Check that the signal
cable is firmly
CHECK SIGNAL
CABLE message is
displayed.
connected to the
computer.
•
•
Check no pins are
bent in the signal
cable connector.
Press any key on the
keyboard or move the
mouse to restore
operation.
Screen is blank and
power indicator is
amber.
The monitor is in
Power Management
Standby/Suspend or
Off state.
No video signal from
the computer.
•
•
Check that the
computer is powered
on.
Check the signal
cable is firmly
connected to the
computer.
•
•
Check no pins are
bent in the signal
cable connector.
Select the right signal
input by switching the
Wrong input is
selected.
Hotkey of
.
Image appears to be
flickering.
The monitor is
operating in an
interlaced or low
refresh rate display
mode.
•
Reconfigure the
computer to use a
non-interlaced display starting on page
mode with a refresh
rate of at least 75 Hz.
Further
information
16.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible Cause
The monitor may be
affected by
interference from
nearby equipment.
Suggested Action
Move fluorescent
desk lighting or any
equipment that
produces magnetic
fields further away
from the monitor.
If another monitor is
close by, separate the
two monitors by at
least 300mm (12 in.)
for optimal
Reference
•
•
•
performance.
Move any equipment
that produces
Image appears to be
discolored.
The monitor may be
affected by
interference form
nearby equipment.
magnetic fields (For
example, sub woofer
loud speakers) further
away form the
monitor.
•
If another monitor is
close by, separate the
two monitors by at
least 300mm (12 in.)
for optimal
performance.
Magnetization of
monitor components
has built up.
Degauss the monitor using
OSD manual demagnetize
function. This function can
only be used once in a 30
minute period.
Further help
If you are unable to correct the problem yourself, you may seek further help as follows:
Call IBM HELPCENTER.
In the US call 1-800-426-7378
In Canada (Toronto only) call 416-383-3344
(All other areas) call 1-800-565-3344
In other countries, contact your dealer, retailer, or other IBM authorized servicer.
Before calling please have available as much of the following information as possible:
1. Type, model, and serial number from the label on the back of your monitor.
2. Purchase receipt.
3. Description of problem.
4. Computer type and model.
5. System configuration (additional hardware etc.).
6. System BIOS version number.
7. Operating System and version number.
8. Display driver version number.
9. Video adapter type.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
If possible, stay by your computer system. Your technical support representative might want
to go through the problem with you during the call.
More help, late breaking news and details of the latest accessories for these products may be
found on the World Wide Web at:
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
The C220p (MT6735) color monitor uses a 22-inch Aperture Grille CRT with a viewable image
size of 508mm (20.0 in.).
Dimensions
Width:
Depth:
Height:
With Packaging:
Without Packaging:
Forward tilt:
Backward tilt:
Swivel:
512.8 mm (20.19 in.)
483.6 mm (19.04 in.)
516.4 mm (20.33 in.)
35.5 kg (78.19 lb)
30.5 kg (67.18 lb)
5°
Weight
Tilt Swivel
15°
+90°/-90°
Image
Maximum Height:
Maximum Width:
Dot Pitch:
Supply Voltage:
Max Supply Current:
Input Signal:
304.80 mm (12.00 in.)
406.44 mm (16.00 in.)
0.24 mm (0.0094 in.)
90-264 V ac, 47-63 Hz
1.8A at 100 V ac
Analog Direct Drive,
75 ohm 0-0.7 V
2048 pels (maximum)
1536 lines (maximum)
360 MHz
Power Input
Video Input
Horiz. Addressability:
Vert. Addressability:
Clock Rate
Communications
VESA DDC
2B
Synchronization Range
Horiz. Frequency:
Vert. Frequency:
Normal Operation:
Off:
30 kHz-130 kHz
50 Hz-160 Hz
<130 W
Power Consumption
(Typical)
<1 W
Environment
Operating Temperature:
Storage Temperature:
Shipping Temperature:
0 to 35 °C (32 to 95 °F)
-25 to 65 °C (-13 to 149 °F)
-25 to 65 °C (-13 to 149 °F)
Operating Humidity:
Storage Humidity:
Shipping Humidity:
Emissions:
10 to 90 %
5 to 95 %
5 to 95 %
TCO’03/TCO’99
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Service Information
The following parts are for use by IBM Service, or IBM authorized dealers, to support the
customer warranty. Parts are for service use only.
Part Number
73P2300
73P2301
73P2302
73P2303
73P2304
73P2305
73P2306
73P2307
73P2308
73P2316
73P2317
Machine type-6735
6735-K0N
6735-60N
6735-K0N
6735-60N
6735-70N
6735-K0S
6735-60S
Description
Two Tone
Black
Two Tone
Black
Black
Two Tone
Black
6735-K0S
6735-60S
Two Tone
Black
Tilt/Swivel
Tilt/Swivel
Black
Pearl White
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices and Trademarks
This section contains information on notices and trademarks.
Notices
IBM may not offer the products, services, or features discussed in this document in all
countries. Consult your local IBM representative for information on the products and services
currently available in your area. Any reference to an IBM product, program, or service is not
intended to state or imply that only that IBM product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe any IBM intellectual
property right may be used instead. However, it is the user’s responsibility to evaluate and
verify the operation of any non-IBM product, program, or service.
IBM may have patents or pending patent applications covering subject matter described in
this document. The furnishing of this document does not give you any license to these
patents. You can send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.
The following paragraph does not apply to the United Kingdom or any country where
such provisions are inconsistent with local law: INTERNATIONAL BUSINESS
MACHINES CORPORATION PROVIDES THIS PUBLICATION “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIEDWARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of
express or implied warranties in certain transactions; therefore, this statement may not apply
to you.
This information could include technical inaccuracies or typographical errors. Changes are
periodically made to the information herein; these changes will be incorporated in new
editions of the publication. IBM may make improvements and/or changes in the product(s)
and/or the program(s) described in this publication at any time without notice.
IBM may use or distribute any of the information you supply in any way it believes appropriate
without incurring any obligation to you.
Any references in this publication to non-IBM Web sites are provided for convenience only
and do not in any manner serve as an endorsement of those Web sites. The materials at
those Web sites are not part of the materials for this IBM product, and use of those Web sites
is at your own risk.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademarks
The following terms, used in this publication, are trademarks or service marks of the IBM
Corporation in the United States, other countries, or both:
IBM logo, HelpCenter and IBM.
ENERGY STAR and the ENERGY STAR logo are U.S. Govt. registered trademarks.
Microsoft Windows, and Windows NT are trademarks of Microsoft
Corporation in the United States, other countries, or both.
Other company, product, and service names may be trademarks or service
marks of others.
© Copyright International Business Machines Corporation 2003. All
rights reserved.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
|
