IBM Computer Monitor 9516 BXX User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.  
These user’s setup instructions cover typical user environments. The on-screen  
messages may differ depending on the level of your hardware and software. In some  
cases you may need to vary the setup procedures.  
For more information, refer to your computer or operating system manuals or consult  
your system administrator or dealer.  
Ces instructions de configuration d’exploitation s’appliquent aux environnements  
d’utilisation types. Les messages affichés à l’écran peuvent varier en fonction du niveau  
de votre matériel et de vos logiciels informatiques. Dans certains cas, vous pouvez être  
amenés à changer de procédures de configuration.  
Pour de plus amples informations à ce sujet, veuillez vous reporter aux manuels de votre  
ordinateur et de votre système d’exploitation, ou consultez l’administrateur de votre  
système ou votre revendeur.  
Diese Anweisungen für die Einstellung durch den Benutzer gelten für typische  
Betriebsumgebungen. Die Bildschirmmeldungen können je nach Art der verwendeten  
Hardware und Software auch anders lauten. In einigen Fällen müssen die  
Einstellungsschritte unter Umständen abgeändert werden.  
Weitere Informationen finden Sie im Computer- oder Betriebssystemhandbuch, oder  
wenden Sie sich an Ihren Systemadministrator oder Fachhändler.  
En estas instrucciones de configuración se describen entornos de usuarios típicos. Los  
mensajes en pantalla, pueden diferir según sea el nivel del hardware y del software. En  
algunos casos, necesitará seguir otros procedimientos para la configuración.  
Para obtener más información, puede consultar los manuales del ordenador o del sistema  
operativo o ponerse en contacto con el administrador del sistema o con el distribuidor.  
Queste istruzioni di configurazione per l’utente coprono gli ambienti operativi comuni. I  
messaggi che appaiono sul video possono differire a seconda dell’hardware e del  
software utilizzati. In alcuni casi potrebbe essere necessario variare le procedure di  
configurazione.  
Per ulteriori informazioni, fare riferimento ai manuali del computer o del sistema  
operativo, o consultare il proprio amministratore di sistema o il concessionario.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
DANGER  
To avoid electric shock hazard:  
•
The product is supplied with a grounded plug and power cord which should be used to  
connect to the AC supply.  
•
•
The power cord should only be used with a properly wired and grounded power outlet.  
Any equipment to which this product is attached must also be connected to a properly  
wired and grounded outlet.  
•
•
Do not remove the covers.  
The product does not incorporate an AC power switch. To isolate the monitor from the  
electrical supply, you must remove the plug from the power outlet. The power outlet  
should be easily accessible  
•
•
Do not connect or disconnect this product during an electrical storm.  
Always use the AC adapter supplied with the monitor.  
Handing:  
•
•
•
Handle this product with care when moving it.  
The panel should not be operated in a horizontal position.  
The fluorescent lamp used in the Liquid Crystal Display assembly contains a small  
quantity of mercury (less than 50 milligrams). For environmental reasons this product  
should not be disposed of into landfill. It must be disposed of as required by local  
ordinances or regulations.  
•
The Liquid Crystal Display assembly is made of glass and can break as a result of  
rough handling or dropping. This may lead under some circumstances to a small  
quantity of the liquid crystal material being exposed. Avoid contact with this material as  
it is an irritant. Should this material come into contact with eyes, hands, etc., the area  
should be washed with water for at least 15 minutes; medical care should be obtained if  
any symptoms are present after washing.  
DANGER  
Pour éviter tout risque d’électrocution :  
•
Le produit est livré avec un cordon d’alimentation et une prise de terre à utiliser pour le  
branchement sur le secteur (VCA).  
•
Le cordon d’alimentation ne doit être branché que sur une prise électrique  
correctement câblée et mise à la terre.  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
•
Tous les matériels auxquels ce produit est raccordé doivent également être branchés  
sur une prise électrique correctement câblée et mise à la terre.  
•
•
Ne pas enlever les capots de protection.  
Le produit ne possède aucun interrupteur de courant électrique (VCA). Pour isoler le  
moniteur de l’alimentation électrique, débrancher la fiche de la prise électrique. La  
prise électrique doit être facilement accessible.  
•
•
Ne pas brancher ou débrancher ce produit pendant un orage électrique.  
Toujours utiliser l’adaptateur électrique (VCA) fourni avec le moniteur.  
Manipulation :  
•
•
•
Manipuler ce produit avec précaution pour le déplacer.  
Le panneau ne doit pas être utilisé en position horizontale.  
La lampe fluorescente de l’écran à cristaux liquides contient une faible quantité de  
mercure (moins de 50 milligrammes). Pour protéger l’environnement, ce produit ne doit  
pas être jeté dans une décharge. Il doit être éliminé conformément aux  
réglementations locales.  
•
L’écran à cristaux liquides est en verre. Il peut donc se briser en cas de chute ou de  
mauvaise manipulation. Si l’écran est brisé, une faible quantité de cristaux liquides  
risque de se répandre. Eviter tout contact avec cette matière irritante. Si des cristaux  
liquides rentrent en contact avec les yeux, les mains, etc., il faut alors laver cette zone  
avec de l’eau pendant au moins 15 minutes. Si des symptômes apparaissent après le  
lavage des zones concernées, contacter un médecin.  
GEFAHRENHINWEISE  
Um der Gefahr eines elektrischen Schlags vorzubeugen:  
•
•
•
Das Gerät wird mit einem geerdeten Stecker und Netzkabel geliefert, das zum  
Anschluß an die Wechselstromversorgung verwendet werden sollte.  
Das Netzkabel darf nur an eine ordnungsgemäß verkabelte und geerdete Steckdose  
angeschlossen werden.  
Alle Geräte, an die dieses Produkt angeschlossen ist, müssen ebenfalls an eine  
ordnungsgEmäß verkabelte und geerdete Steckdose angeschlossen sein.  
•
•
Die Gehäusedeckel dürfen nicht entfernt werden.  
Das Gerät besitzt keinen Hauptschalter. Um die Stromversorgung zum Monitor zu  
unterbrechen, müssen Sie den Stecker aus der Steckdose ziehen. Die Steckdose  
sollte leicht zugänglich sein.  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
•
•
Das Gerät darf während eines Gewitters nicht ein- oder ausgeschaltet werden.  
Verwenden Sie nur das im Lieferumfang des Monitors enthaltene Netzteil.  
Handhabung:  
•
•
•
Seien Sie vorsichtig, wenn Sie das Gerät bewegen.  
Das Bedienfeld darf nicht bedient werden, wenn der Monitor auf der Seite liegt.  
Die in der LCD-Baugruppe verwendete Leuchtstofflampe enthält eine geringe Menge  
Quecksilber (unter 50 mg). Aus Umweltschutzgründen darf dieses Gerät nicht auf eine  
Mülldeponie gebracht werden, sondern muß gemäß den örtlichen Vorschriften und  
Verordnungen entsorgt werden.  
•
Die LCD-Baugruppe besteht aus Glas, das bei unsanfter Handhabung oder  
Fallenlassen des Geräts zerbrechen kann. In diesem Fall tritt unter Umständen eine  
geringe Menge flüssiges Quecksilber aus. Vermeiden Sie den Kontakt mit dieser  
Substanz, da es sich um einen Reizstoff handelt. Sollten Ihre Augen, Hände usw. damit  
in Berührung kommen, waschen Sie den betroffenen Bereich mindestens 15 Minuten  
mit Wasser aus. Wenn nach dem Auswaschen noch Beschwerden festzustellen sind,  
sollte ein Arzt zu Rate gezogen werden.  
GEVAAR  
Voor het vermijden van elektrische schokken:  
•
•
•
Dit product wordt geleverd met een voedingskabel voorzien van een geaarde stekker.  
Voor aansluiting op het lichtnet dient deze voedingskabel gebruikt te worden.  
De voedingskabel dient alleen gebruikt te worden in een stopcontact dat correct  
bedraad en geaard is.  
Alle apparatuur waar dit product op aangesloten is dient eveneens op een correct  
bedraad en geaard stopcontact aangesloten te zijn.  
•
•
Demonteer niet de dekplaten.  
Dit product is niet voorzien van een netschakelaar. Scheid de monitor van de  
netspanning door de stekker uit het stopcontact te nemen. Het stopcontact dient goed  
toegankelijk te zijn.  
•
•
Dit product niet tijdens onweer aansluiten of loskoppelen.  
Gebruik altijd de wisselspanningsadapter die bij de monitor meegeleverd is.  
Hoe met het product omgegaan moet worden:  
•
•
Ga bij verplaatsingen voorzichtig met dit product om.  
Het bedieningspaneel mag niet in horizontale stand bediend worden.  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
•
•
De fluorescerende lamp in het LCD-samenstel bevat een kleine hoeveelheid kwik  
(minder dan 50 mg). In verband met milieueisen mag dit product niet als normaal afval  
gestort worden. Men dient het te verwijderen volgens ter plaatse geldende regels en  
verordeningen.  
Doordat het LCD-samenstel van glas gemaakt is kan het bij ruwe behandeling of als  
men het laat vallen, breken. In sommige omstandigheden kan dit tot gevolg hebben dat  
het vloeibare-kristalmateriaal vrijkomt. Vermijd contact met dit materiaal aangezien het  
irritaties kan veroorzaken. Als het materiaal in contact komt met ogen, handen, enz.,  
dan moeten deze gedurende minstens 15 minuten met water gespoeld worden; als er  
na het spoelen nog steeds symptomen aanwezig zijn dient er medische hulp  
ingeroepen te worden.  
PELIGRO  
Para evitar el riesgo de descargas eléctricas:  
•
•
•
El producto se suministra con un enchufe con conexión a tierra y con un cable de  
alimentación para conectar al suministro de corriente alterna.  
Conecte el cable de alimentación sólo a un tomacorrientes con el cableado y conexión  
a tierra correctos.  
Este producto deberá conectarse a un equipo que esté también conectado a un  
tomacorrientes con el cableado y conexión a tierra correctos.  
•
•
No retire las cubiertas.  
En este producto no se incorpora un interruptor para alimentación de corriente alterna.  
Para aislar el monitor del suministro de energía eléctrica, desconéctelo del  
tomacorrientes. Asegúrese de utilizar una toma eléctrica de fácil acceso.  
•
•
No conecte o desconecte este producto durante una tormenta eléctrica.  
Utilice siempre el adaptador de corriente alterna que se suministra con el monitor.  
Manipulación:  
•
•
•
Al mover el producto, hágalo con cuidado.  
El panel no debe ponerse en funcionamiento si se encuentra en posición horizontal.  
La lámpara fluorescente que se utiliza en la pantalla de cristal líquido (LCD) contiene  
una pequeña cantidad de mercurio (menos de 50 miligramos). No lo tire junto a  
basuras que se depositan en vertederos; hacerlo, podría resultar nocivo para el medio  
ambiente. Tenga en cuenta la normativa local en cuanto a eliminación de desechos.  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
•
La pantalla de cristal líquido (LCD) es de cristal y puede romperse como resultado de  
un trato brusco o de una caída. Podría suceder que una pequeña cantidad del material  
de cristal líquido quedase al descubierto. Este material es irritante; evite tocarlo.  
Asegúrese de evitar el contacto de sus ojos, manos, etc., con el líquido. Si el líquido  
toca alguna de estas partes, lave el área afectada con agua corriente durante 15  
minutos como mínimo y, luego, consulte a un médico.  
PERICOLO  
Per evitare rischi di scosse elettriche:  
•
•
•
Il prodotto è dotato di una spina e di un cavo di alimentazione con messa a terra che  
dovranno essere utilizzati per il collegamento all'alimentazione CA.  
Il cavo di alimentazione dovrà essere utilizzato esclusivamente con una presa elettrica  
adeguatamente cablata e con messa a terra.  
Si dovrà utilizzare una presa adeguatamente cablata e con messa a terra anche per  
eventuali apparecchiature alle quali il prodotto sia collegato.  
•
•
Non smontare le coperture.  
L'apparecchiatura non incorpora un interruttore dell’alimentazione CA. Per isolare il  
monitor dall'alimentazione elettrica è necessario staccare la spina dalla presa elettrica.  
La presa elettrica dovrà essere facilmente accessibile.  
•
•
Non collegare o scollegare il prodotto durante una tempesta elettrica.  
Utilizzare sempre l'adattatore CA fornito con il monitor.  
Note di impiego:  
•
•
•
Maneggiare con cura il prodotto per spostarlo.  
Il monitor non deve essere utilizzato in posizione orizzontale.  
La lampada fluorescente installata nel display a cristalli liquidi (LCD) contiene una  
piccola quantità di mercurio (meno di 50 milligrammi). Pertanto, per ragioni dettate  
dalla tutela dell'ambiente, non utilizzare le normali discariche per lo smaltimento del  
prodotto ma attenersi ai regolamenti e alle ordinanze locali.  
•
Il display a cristalli liquidi è di vetro e, se lasciato cadere o non maneggiato con cautela,  
può rompersi. Ciò potrebbe causare in certe condizioni la fuoriuscita di una piccola  
quantità della sostanza che compone i cristalli liquidi. Evitare il contatto con tale  
sostanza perché è irritante. Se la sostanza dovesse venire a contatto con occhi, mani,  
ecc., risciacquare la parte interessata con acqua per almeno 15 minuti. Se, dopo aver  
risciacquato la parte, si avvertono eventuali sintomi, consultare un medico.  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
PERIGO  
Para evitar o perigo de choques eléctricos:  
•
•
•
O produto é fornecido com uma ficha com massa e um cabo eléctrico que deverá ser  
utilizado para ligar à alimentação CA.  
O cabo eléctrico deve ser apenas utilizado com uma tomada devidamente electrificada  
e ligada à massa.  
Qualquer equipamento a que este produto se encontre ligado também tem que estar  
ligado a uma tomada devidamente electrificada e ligada à massa.  
•
•
Não tire as coberturas.  
O produto não possui um interruptor CA. Para isolar o monitor da alimentação  
eléctrica, tem que tirar a ficha da tomada. A tomada deverá estar num local de acesso  
fácil.  
•
•
Não ligue nem desligue este produto durante uma trovoada.  
Utilize sempre o adaptador CA fornecido com o monitor.  
Manuseamento:  
•
•
•
Manuseie este produto com cuidado quando o deslocar.  
O painel não deverá ser utilizado numa posição horizontal.  
A luz fluorescente utilizada no conjunto do visor de cristais líquidos (LCD) contém uma  
pequena quantidade de mercúrio (menos de 50 miligramas). Por razões de ordem  
ambiental este produto não pode ser eliminado num aterro sanitário. Terá que ser  
eliminado de acordo com as disposições e regulamentos locais.  
•
O conjunto do visor de cristais líquidos (LCD) é feito de vidro e pode partir-se se for  
tratado com falta de cuidado ou se cair. Estas situações, em certas circunstâncias,  
podem levar à exposição de uma pequena quantidade de cristais líquidos. Evite o  
contacto com este material porque se trata de um produto irritante. Se este material  
entrar em contacto com os olhos, mãos, etc., a área deverá ser lavada com água  
durante pelo menos 15 minutos; se, após, a lavagem detectar algum sintoma deverá  
consultar um médico.  
FARE  
Sådan undgås risiko for elektrisk stød:  
•
Dette produkt leveres med et jordstik og en netledning, som skal bruges ved tilslutning  
til strømnettet.  
vi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
•
•
Netledningen må kun bruges i en korrekt jordet og tilsluttet stikkontakt.  
Alt udstyr, som dette produkt tilsluttes til, skal også være tilsluttet en korrekt  
jordforbundet og tilsluttet stikkontakt.  
•
•
Dækslerne må ikke fjernes.  
Produktet har ingen strømafbryder. Hvis skærmen skal isoleres fra den elektriske  
strømkilde, skal stikket tages ud af stikkontakten. Stikkontakten skal være umiddelbart  
inden for rækkevidde.  
•
•
Tilslut og frakobl ikke dette produkt i tordenvejr.  
Benyt altid den vekselstrømsadapter, der fulgte med skærmen.  
Håndtering:  
•
•
•
Behandl produktet forsigtigt, når det flyttes.  
Panelet må ikke betjenes i vandret stilling.  
Den fluorescerede pære i LCD-skærmen indeholder et mindre kvantum kviksølv (under  
50 mg). Af hensyn til miljøet bør dette produkt ikke bortskaffes på en losseplads. Det  
skal bortskaffes i henhold til lokale love og regulativer.  
•
LCD-skærmen består af glas, der kan gå itu, hvis den behandles uforsigtigt eller tabes.  
Dette kan i visse tilfælde medføre udslip af en mindre mængde flydende krystaller.  
Undgå kontakt med dette materiale, da det kan give anledning til irritation. Hvis dette  
materiale kommer i kontakt med øjne, hænder osv. bør området skylles med vand i  
mindst 15 minutter. Kontakt lægen i tilfælde af symptomer efter skylningen.  
ADVARSEL  
Slik unngår du risiko for elektrisk støt:  
•
Produktet er utstyrt med et jordet støpsel og en jordet strømledning som skal brukes til  
å koble det til strømtilførselen.  
•
•
Strømledningen bør bare brukes i en riktig montert og jordet stikkontakt.  
Alt utstyr som dette produktet kobles sammen med, må også kobles til en riktig montert  
og jordet kontakt.  
•
•
Ta ikke av dekselet.  
Produktet har ingen strømbryter. Når du vil bryte strømtilførselen, må du ta ut støpselet  
fra kontakten. Kontakten bør være lett tilgjengelig.  
•
•
Koble ikke til eller fra produktet i tordenvær.  
Bruk alltid vekselstrømsadapteren som følger med skjermen.  
vii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Håndtering:  
•
•
•
Vær forsiktig når du flytter produktet.  
Panelet bør ikke brukes i vannrett stilling.  
Lysstoffrøret som er brukt i LCD-enheten, inneholder en liten mengde kvikksølv  
(mindre enn 50 gram). Av miljøhensyn må dette produktet ikke kastes i naturen, men  
må behandles som spesialavfall i henhold til lokale lover og regler.  
•
LCD-enheten består av glass som kan knuses hvis den behandles uforsiktig eller faller  
i bakken. I noen tilfeller kan dette føre til at litt av LCD-væsken renner ut. Unngå å  
komme i kontakt med materialet, da det kan forårsake irritasjoner. Hvis materialet  
kommer i kontakt med øynene, hendene e.l., bør det utsatte området skylles med vann  
i minst 15 minutter. Oppsøk lege hvis det fortsatt vises symptomer på irritasjon etter  
vask.  
VARNING  
Så här undviker du risk för elektriska stötar:  
•
•
•
Produkten är försedd med en jordad stickpropp och sladd för anslutning till eluttag.  
Nätsladden ska bara anslutas till ett korrekt installerat jordat eluttag.  
All utrustning som sammankopplas med denna produkt måste också anslutas till ett  
korrekt installerat jordat eluttag.  
•
•
Ta inte bort kåporna.  
Produkten är inte försedd med nätströmbrytare. Om du vill koppla bort skärmen från  
elnätet måste du dra ut stickproppen ur eluttaget. Eluttaget ska vara lättåtkomligt.  
•
•
Undvika att ansluta eller koppla bort produkten under åskväder.  
Använd alltid nätadaptern som följde med skärmen.  
Hantering:  
•
•
•
Hantera produkten varsamt när du flyttar den.  
Panelen får inte användas i horisontellt läge.  
Lampan som används i LCD-enheten innehåller en liten mängd kvicksilver (mindre än  
50 milligram). Av miljöskäl får den inte kasseras som vanligt avfall, utan måste  
kasseras enligt lokala förordningar och regler.  
•
LCD-enheten är tillverkad av glas och kan gå sönder om den utsätts för ovarsam  
hantering eller tappas i golvet. Detta kan under vissa omständigheter leda till att en  
liten mängd av flytande kristall (LCD)-materialet frigörs. Undvik kontakt med detta  
viii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
material eftersom det kan orsaka irritation. Om materialet skulle komma i kontakt med  
ögon, händer m m ska området spolas med vatten i minst 15 minuter; uppsök läkare  
om du har symptom efter spolningen.  
VAROITUS  
Sähköiskuvaaran välttäminen:  
•
•
•
Tuotteen mukana toimitetaan maadoitettu pistoke ja liitäntäjohto, joita pitäisi käyttää  
vaihtovirtasyöttöön kytkettäessä.  
Liitäntäjohdon saa kytkeä vain asianmukaisesti johdotettuun ja maadoitettuun  
pistorasiaan.  
Kaikki laitteet, joihin tämä tuote liitetään, on myös kytkettävä asianmukaisesti  
johdotettuun ja maadoitettuun pistorasiaan.  
•
•
Älä poista suojakansia.  
Laitteessa ei ole vaihtovirtakatkaisijaa. Pistoke on poistettava pistorasiasta monitorin  
sähkövirran syötön katkaisemiseksi. Pistorasian pitäisi olla helposti käsiksi  
päästävässä paikassa.  
•
•
Älä kytke tuotetta päälle tai päältä ukonilmalla.  
Käytä aina monitorin mukana toimitettua vaihtovirta-adapteria.  
Käsittely:  
•
•
•
Käsittele tuotetta varovasti siirtäessäsi sitä.  
Paneelia ei saa käyttää vaakasuorassa asennossa.  
Nestekidenäytössä käytetty loistelamppu sisältää pienen määrän elohopeaa (alle 50  
milligrammaa). Ympäristönsuojelusyistä tätä tuotetta ei saa toimittaa kaatopaikalle,  
vaan se on hävitettävä paikallisten säännösten ja määräysten mukaisesti.  
•
Nestekidenäyttö on tehty lasista, ja se voi rikkoutua kovakouraisesti käsiteltäessä tai  
pudotettaessa. Joissakin olosuhteissa tällöin voi päästä vapaaksi pieniä määriä  
nestekideainetta. Vältä koskettamasta tätä ainetta, sillä se aiheuttaa ärsytystä. Jos  
aine pääsee kosketuksiin silmien, käsien ym. kanssa, aluetta pitää huuhdella vedellä  
vähintään 15 minuutin ajan; jos huuhtelun jälkeen havaitaan ärsytysoireita, on  
käännyttävä lääkärin puoleen.  
ix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢁꢂꢃꢄꢂꢅꢆ  
ꢇ ꢈꢉꢊꢋꢌꢉꢈꢍꢎꢏꢐꢑꢒꢉꢓ ꢌꢔꢕꢌꢎꢐꢉꢋꢖꢗꢓꢊꢘꢎꢍꢖꢋꢙꢚꢈꢛꢜ  
ꢝ
 ꢎꢉꢍꢘꢎ!"ꢌꢉꢈꢐꢊ"ꢉꢗꢚꢌꢈ ꢉꢗꢏꢎꢔ ꢈ#$%ꢌꢎꢉ$ꢗꢉ%ꢌꢈꢉꢑꢗ &$%ꢌꢎꢉꢏ ꢛꢉꢓꢈ ꢉꢋꢖꢗꢓꢊꢘ ꢓ"ꢉꢓꢈꢖ'ꢔ ꢎꢉꢊꢈꢉꢎꢍꢎꢚꢈꢉ  
ꢍꢘ%ꢍꢗ ꢉꢌꢈꢉ(ꢘꢋ# $ꢎꢍꢎ ꢎꢕꢌꢊꢈ ꢉꢑ ꢈꢉꢊꢋꢉ#ꢕꢌꢔꢗ#ꢋꢉ#ꢊꢋꢌꢉꢍꢈꢘꢎ(ꢒꢉꢗꢌꢈꢖꢖꢈ##"$ꢗꢌꢎꢐꢉꢘꢗꢕ$ꢈꢊꢎꢛꢉ  
)*+,-  
ꢝ
ꢝ
 ꢎꢉꢋꢖꢗꢓꢊꢘ ꢓ"ꢉꢓꢈꢖ'ꢔ ꢎꢉ.ꢈꢉꢍꢘ%ꢍꢗ ꢉꢌꢈꢉ#ꢐꢌꢔ%ꢗꢊꢈ ꢉ$"ꢌꢎꢉ#ꢗꢉꢍꢘꢚ/ꢗꢛꢉ$ꢗꢉꢓꢈꢊ0ꢖꢖꢋꢖꢋꢉ  
ꢓꢈꢖ&ꢔꢚ&#ꢋꢉꢓꢈ ꢉꢑꢗꢚ&#ꢋ-  
ꢅ ꢉ#ꢐ#ꢓꢗꢐ%ꢛꢉ#ꢊ ꢛꢉꢎꢍꢎꢚꢗꢛꢉ.ꢈꢉ#ꢐꢌꢔꢗ.ꢗꢚꢉꢈꢐꢊ"ꢉꢊꢎꢉꢍꢘꢎ!"ꢌꢉꢍꢘ%ꢍꢗ ꢉꢗꢍꢚ#ꢋꢛꢉꢌꢈꢉ#ꢐꢌꢔ%ꢎꢌꢊꢈ ꢉꢉ#ꢗꢉ  
ꢍꢘꢚ/ꢈꢉ$ꢗꢉꢓꢈꢊ0ꢖꢖꢋꢖꢋꢉꢓꢈꢖ&ꢔꢚ&#ꢋꢉꢓꢈ ꢉꢑꢗꢚ&#ꢋ-  
ꢝ
ꢝ
1ꢋꢌꢉꢈꢏꢈ ꢘꢗꢚꢊꢗꢉꢊꢈꢉꢓꢈꢖꢕ$$ꢈꢊꢈ-  
 ꢎꢉꢍꢘꢎ!"ꢌꢉꢔꢗꢌꢉꢍꢗꢘ ꢖꢈ$20ꢌꢗ ꢉꢗꢌ#&$ꢈꢊ&$%ꢌꢎꢉꢔ ꢈꢓ"ꢍꢊꢋꢉꢗꢌꢈꢖꢖꢈ##"$ꢗꢌꢎꢐꢉꢘꢗꢕ$ꢈꢊꢎꢛꢉ  
)*+,-ꢉꢇ ꢈꢉꢌꢈꢉꢈꢍꢎ$ꢎꢌ'#ꢗꢊꢗꢉꢊꢋꢌꢉꢎ."ꢌꢋꢉꢈꢍ"ꢉꢊꢋꢌꢉꢍꢈꢘꢎ(ꢒꢉꢘꢗꢕ$ꢈꢊꢎꢛ3ꢉꢍꢘ%ꢍꢗ ꢉꢌꢈꢉ  
ꢈꢏꢈ ꢘ%#ꢗꢊꢗꢉꢊꢎꢉꢏ ꢛꢉꢈꢍ"ꢉꢊꢋꢌꢉꢍꢘꢚ/ꢈ-ꢉ4ꢉꢍꢘꢚ/ꢈꢉꢍꢘ%ꢍꢗ ꢉꢌꢈꢉ2ꢘꢚ#ꢓꢗꢊꢈ ꢉ#ꢗꢉ#ꢋ$ꢗꢚꢎꢉꢗꢕꢓꢎꢖꢈꢉ  
ꢍꢘꢎ#ꢍꢗꢖ0# $ꢎ-  
ꢝ
ꢝ
1ꢋꢉ#ꢐꢌꢔ%ꢗꢊꢗꢉꢒꢉꢈꢍꢎ#ꢐꢌꢔ%ꢗꢊꢗꢉꢊꢎꢉꢍꢘꢎ!"ꢌꢉꢓꢈꢊ0ꢉꢊꢋꢉꢔ 0ꢘꢓꢗ ꢈꢉꢋꢖꢗꢓꢊꢘꢎ.ꢕꢗꢖꢖꢈꢛ-  
ꢂꢈꢉ(ꢘꢋ# $ꢎꢍꢎ ꢗꢚꢊꢗꢉꢍ0ꢌꢊꢎꢊꢗꢉꢊꢎꢌꢉꢍꢘꢎ#ꢈꢘ$ꢎꢑ%ꢈꢉ*+ꢉꢍꢎꢐꢉꢐꢍ0ꢘ(ꢗ ꢉ#ꢊꢋꢉ#ꢐ#ꢓꢗꢐꢈ#ꢚꢈꢉꢊꢋꢛꢉ  
ꢎ."ꢌꢋꢛ-  
5ꢗ ꢘ #$"ꢛꢜ  
ꢝ
ꢝ
ꢝ
ꢅꢉ(ꢗ ꢘ #$"ꢛꢉꢊꢎꢐꢉꢍꢘꢎ!"ꢌꢊꢎꢛꢉꢓꢈꢊ0ꢉꢊꢋꢉ$ꢗꢊꢈꢏꢎꢘ0ꢉꢊꢎꢐꢉꢍꢘ%ꢍꢗ ꢉꢌꢈꢉꢑꢚꢌꢗꢊꢈ ꢉ$ꢗꢉꢍꢘꢎ#ꢎ(ꢒ-  
4ꢉꢎ."ꢌꢋꢉꢔꢗꢌꢉꢍꢘ%ꢍꢗ ꢉꢌꢈꢉꢖꢗ ꢊꢎꢐꢘꢑꢗꢚꢉ#ꢗꢉꢎꢘ /"ꢌꢊ ꢈꢉ.%#ꢋ-  
ꢅꢉꢖꢈ$ꢍꢊꢒꢘꢈꢛꢉꢏ.ꢎꢘ #$ꢎꢕꢉ#ꢊꢋꢌꢉꢎ."ꢌꢋꢉꢐꢑꢘ'ꢌꢉꢓꢘꢐ#ꢊ0ꢖꢖ&ꢌꢉ)6+7,ꢉꢍꢗꢘ %(ꢗ ꢉ$ ꢓꢘꢒꢉ  
ꢍꢎ#"ꢊꢋꢊꢈꢉꢐꢔꢘꢈꢘꢑꢕꢘꢎꢐꢉ)ꢖ ꢑ"ꢊꢗꢘꢎꢉꢈꢍ"ꢉ89ꢉ:;,-ꢉꢇ ꢈꢉꢖ"ꢑꢎꢐꢛꢉꢍꢘꢎ#ꢊꢈ#ꢚꢈꢛꢉꢍꢗꢘ 20ꢖꢖꢎꢌꢊꢎꢛ3ꢉ  
ꢊꢎꢉꢍꢘꢎ!"ꢌꢉꢈꢐꢊ"ꢉꢔꢗꢌꢉꢍꢘ%ꢍꢗ ꢉꢌꢈꢉꢈꢍꢎꢘꢘꢚꢍꢊꢗꢊꢈ ꢉ#ꢗꢉ(&$ꢈꢊꢗꢘ%ꢛ-ꢉꢀꢈꢊ0ꢉꢊꢋꢌꢉꢈꢍ"ꢘꢘ <ꢒꢉꢊꢎꢐꢉ  
ꢍꢘ%ꢍꢗ ꢉꢌꢈꢉꢈꢓꢎꢖꢎꢐ.ꢎꢕꢌꢊꢈ ꢉꢎ ꢉꢓꢈꢊ0ꢉꢊ"ꢍꢎꢐꢛꢉ #(ꢕꢎꢐ#ꢗꢛꢉ#(ꢗꢊ ꢓ%ꢛꢉꢔ ꢈꢊ0ꢙꢗ ꢛꢉꢒꢉꢓꢈꢌꢎꢌ #$ꢎꢚ-  
ꢝ
4ꢉꢔ 0ꢊꢈꢙꢋꢉꢊꢋꢛꢉꢎ."ꢌꢋꢛꢉꢐꢑꢘ'ꢌꢉꢓꢘꢐ#ꢊ0ꢖꢖ&ꢌꢉꢈꢍꢎꢊꢗꢖꢗꢚꢊꢈ ꢉꢈꢍ"ꢉꢑꢐꢈꢖꢚꢉꢓꢈ ꢉ$ꢍꢎꢘꢗꢚꢉꢌꢈꢉ#ꢍ0#ꢗ ꢉ  
#ꢗꢉꢍꢗꢘꢚꢍꢊ&#ꢋꢉ2ꢚꢈ ꢎꢐꢉ(ꢗ ꢘ #$ꢎꢕꢉꢒꢉꢍꢊ'#ꢋꢛ-ꢉꢆꢗꢉ$ꢗꢘ ꢓ%ꢛꢉꢍꢗꢘ ꢍꢊ'#ꢗ ꢛ3ꢉꢈꢐꢊ"ꢉ$ꢍꢎꢘꢗꢚꢉꢌꢈꢉ  
%(ꢗ ꢉ&ꢛꢉꢈꢍꢎꢊ%ꢖꢗ#$ꢈꢉꢊꢋꢌꢉ%ꢓ.ꢗ#ꢋꢉ$ ꢓꢘꢒꢛꢉꢍꢎ#"ꢊꢋꢊꢈꢛꢉꢊ&ꢌꢉꢐꢑꢘ'ꢌꢉꢓꢘꢐ#ꢊ0ꢖꢖ&ꢌ-ꢉ=ꢍꢎꢏꢕꢑꢗꢊꢗꢉ  
ꢊꢋꢌꢉꢗꢍꢈꢏꢒꢉ$ꢗꢉꢊꢎꢉꢐꢖ ꢓ"ꢉꢈꢐꢊ"ꢉꢑ ꢈꢊꢚꢉꢍꢘ"ꢓꢗ ꢊꢈ ꢉꢑ ꢈꢉꢗꢘꢗ. #ꢊ ꢓꢒꢉꢎꢐ#ꢚꢈ-ꢉ>0ꢌꢉꢊꢎꢉꢐꢖ ꢓ"ꢉ%ꢘ.ꢗ ꢉ#ꢗꢉ  
ꢗꢍꢈꢏꢒꢉ$ꢗꢉꢊꢈꢉ$0ꢊ ꢈ3ꢉꢊꢈꢉ(%ꢘ ꢈꢉꢓꢖꢍ3ꢉꢙꢗꢍꢖꢕꢌꢗꢊꢗꢉꢊꢋꢌꢉꢍꢗꢘ ꢎ(ꢒꢉ$ꢗꢉꢌꢗꢘ"ꢉꢑ ꢈꢉꢊꢎꢐꢖ0( #ꢊꢎꢌꢉ?8ꢉ  
ꢖꢗꢍꢊ0ꢉꢓꢈ ꢉ#ꢐ$2ꢎꢐꢖꢗꢐꢊꢗꢚꢊꢗꢉ%ꢌꢈꢉꢑ ꢈꢊꢘ"ꢉꢈꢌꢉꢓ0ꢍꢎ ꢈꢉ#ꢐ$ꢍꢊ'$ꢈꢊꢈꢉꢗꢍ $%ꢌꢎꢐꢌꢉ$ꢗꢊ0ꢉꢊꢎꢉ  
ꢍꢖꢕ# $ꢎ-  
x
Download from Www.Somanuals.com. All Manuals Search And Download.  
TEHLÝKE  
Elektrik çarpmasý tehlikesinden kaçýnmak için:  
•
•
•
Cihaz, elektrik baðlantýsý için topraklanmýþ fiþli bir elektrik kablosuyla birlikte  
gönderilmiþtir.  
Elektrik kablosunun fiþi, elektrik ve toprak baðlantýlarý usulüne uygun olarak yapýlmýþ  
bir prize takýlmalýdýr.  
Bu cihazýn baðlanacaðý diðer tüm cihazlar da elektrik ve toprak baðlantýlarý usulüne  
uygun olarak yapýlmýþ prize takýlmýþ olmalýdýr.  
•
•
Kapaklarý çýkarmayýnýz.  
Bu cihazda elektriði açma-kapama düðmesi yoktur. Monitörün elektrikle baðlantýsýný  
kesmek için fiþini prizden çekmeniz gereklidir. Priz, kolayca eriþilebilecek bir yerde  
olmalýdýr.  
•
•
Bu cihazý elektriksel fýrtýna sýrasýnda prize takmayýnýz veya prizden çýkarmayýnýz.  
Daima monitörünüzle birlikte gönderilen elektrik adaptörünü kullanýnýz.  
Kaldýrma:  
•
•
•
Bu cihazý taþýrken dikkatli olunuz.  
Panel yatay konumda çalýþtýrýlmamalýdýr.  
LCD ekranýn içindeki floresan lamba az miktarda (50 mg’den az) cýva içerir. Çevre  
kirlenmesine meydan vermemek için bu ürün þehir çöplüðüne atýlmamalýdýr. Yerel  
yönetmeliklerde belirtilen þekilde yok edilmelidir.  
•
LCD ekran birimi camdan yapýlmýþtýr ve özenle taþýnmadýðý ya da düþürüldüðü  
takdirde kýrýlabilir. Bu, bazý durumlarda az miktarda sývý kristal maddesinin açýða  
çýkmasýna neden olabilir. Bu madde tahriþ edici olduðu için ona dokunmayýnýz. Bu  
madde cildinize, ellerinize vb temas ederse, etkilenen yer 15 dakika akar su altýnda  
yýkanmalýdýr; yýkadýktan sonra da belirtiler devam ederse týbbi yardým istenmelidir.  
xi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
&RQWHQWV  
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Workplace Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Lifting the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Working Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Connecting your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Switching on the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Adjusting the Monitor Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Caring for your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Configuring your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Automatic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Monitor Information Diskette for Windows 95 . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Auto Setup for the PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
10  
Auto Setup for DOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Auto Setup for Windows 3.1, Windows 95, or Windows NT . . . . . . . . . . . . . . 12  
Auto Setup OS/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Auto Setup for the RS/6000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Auto Setup for AIXwindows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Auto Setup for the Gt3i, GXT150, or GXT150L Adapter . . . . . . . . . . . . . . . . . 16  
Auto Setup for the GXT150M Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Auto Setup for the GT4, GT4X, GT4I, or GT4XI Adapter . . . . . . . . . . . . . . . . 20  
Auto Setup for the GXT150P (RS/6000 Model 40P) Adapter . . . . . . . . . . . . . 22  
Auto Setup for the Sun Workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Auto Setup for the HP Workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manual Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Quick Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
User controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Front of screen controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
On-screen display (OSD) controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Further Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Supported Screen Addressability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Default Preset Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Video Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Adapters for RS/6000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
PC Video Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Video Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Hardware Requirements  
This Monitor requires a computer with a suitable on-board sub-system or Video Adapter card that can  
support SXGA 1280 x 1024 at 75 Hz.  
Workplace Preparation  
Positioning the Monitor  
This section gives advice  
on what you should  
consider before you set up your  
monitor.  
Choose a suitable place to position the monitor where it is not near  
fluorescent desk lighting. Ensure that the furniture or equipment can support  
the weight of the monitor. Allow at least 2 inches (50mm) ventilation space  
around the monitor.  
Height  
The monitor should be positioned so that the top of the screen is slightly  
below your eye level when you sit at your workstation.  
Orientation  
Choose a position that gives the least reflection from lights and windows,  
usually at a right angle to any windows. The monitor should be positioned  
directly in front of you so that you do not have to twist your body to use it. Tilt  
the monitor to a comfortable viewing angle.  
Lifting the Monitor  
Hold the bottom of the screen with both hands in the positions shown.  
Do not support the  
monitor within the  
screen area. The Liquid  
Crystal Display is glass and  
can be damaged by rough  
handling or excessive  
pressure.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Working Practices  
Rest  
Take regular breaks. Vary your posture, stand up and stretch occasionally as  
prolonged use of computer workstations can be tiring.  
This section gives advice  
on how you can work  
Back  
You should sit back in your chair and use the backrest.  
comfortably and reduce fatigue.  
Hands  
Use a light touch on the keyboard, keeping your hands and fingers relaxed.  
Allow a space in front of the keyboard to rest your wrists when not typing.  
Consider using a wristpad.  
Eyesight  
Working with monitors, in common with any prolonged close work, can be  
visually demanding. Look away from the screen periodically and have your  
eyesight checked regularly.  
Screen settings  
Set the screen brightness and contrast to a comfortable level. You may have  
to adjust this as the lighting changes during the day. Many application  
programs let you select color combinations which can help you to view in  
comfort  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting your Monitor  
Be sure to read the  
‘Safety Information’ at  
the front of this User Guide  
before carrying out this  
procedure.  
1. With the monitor standing vertically and at it’s greatest height, remove  
the cable cover at the rear of the monitor.  
2. Turn off your PC and all attached devices.  
3. Plug the video interface cable into the socket marked  
computer.  
on your  
4. Connect the red, green and blue interface cables into the connectors of  
the same color on the monitor. Position the ends of the cables in front of  
the connectors, as shown. Plug the cables into the connectors and push  
and twist the ends of the cables until they are firmly locked to the  
connectors.  
If power-saving function is  
required, but the system  
unit does not support power  
management, then an optional  
Keyboard/Mouse Y-cable (P/N:  
03L7924) can be purchased  
which allows access to this  
function within the monitor.  
5. If your cable has five connectors, connect the H-Sync (black) interface  
cable to connection 1, and connect the V-Sync (white) interface cable to  
connector 2.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Connect the AC Adapter as shown.  
7. Slide the cable cover up to fit it into the monitor while depressing the  
parts at A , and make sure that they are hooked in to the monitor  
Be careful not to pinch the  
video signal cable into  
between the rear cover and the  
cable cover  
.
8. Connect the power cord to the AC Adapter.  
9. Connect the other end of the power cord to a correctly grounded AC  
power source.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switching on the Monitor  
Switch on the power source and PC. To turn on the monitor, push and  
release the power switch. To switch it off, push and release the power switch  
again.  
Adjusting the Monitor Position  
Viewing Angle  
You can tilt the screen backward or rotate the monitor to the left or right, as  
shown below.  
Height  
To adjust the height of the screen, push and hold the adjustment button on  
the rear of the monitor with one hand, and raise or lower the screen with the  
other hand.  
Do not insert your finger in  
the gap at section A . It  
may get nipped when you lift the  
monitor screen.  
Caring for your Monitor  
Be sure to turn off the power before you perform any maintenance on the  
monitor. Clean your monitor as follows:  
•
•
Gently wipe the device covers and the screen with a soft cloth.  
Do not use chemicals such as thinner or benzene. They may damage the  
surface coating.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuring your Monitor  
Automatic Setup  
The Setup Utility included  
When you first use your monitor you must perform Automatic (auto) Setup.  
on the setup option  
diskettes are for displaying  
color-bar patterns. They do not  
replace or modify the display  
driver.  
This procedure sets up your monitor to process the video signals from your  
computer without image discoloration or flicker. After you perform auto setup,  
the settings are stored and used each time you turn on the monitor.  
The automatic setup  
instructions require the  
monitor to be warmed up for 15  
minutes. This is not required for  
normal operation.  
Before you begin  
Check the type of computer the monitor is connected to and turn to the  
appropriate page as shown in the table below.  
Type of Computer  
Turn to ...  
PC  
Auto Setup for the PC on page 10  
RS/6000  
Auto Setup for the RS/6000 on page 14  
Sun Workstation  
Auto Setup for the Sun Workstation on  
page 24  
HP Workstation  
Auto Setup for the HP Workstation on  
page 26  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor Information Diskette for Windows 95  
To utilise the Plug and Play feature in Windows 95, files should be loaded  
from the IBM Color LCD Monitor Installation diskette as follows :  
This section must be  
completed before  
continuing with the  
Windows 95Auto Setup on  
page 12.  
1. Turn off the computer and all attached devices.  
2. Ensure that the IBM monitor that you wish to install is connected  
correctly.  
3. Power on the monitor and then the system unit. Allow the system to  
boot into Windows 95.  
4. Open the DISPLAY PROPERTIES window by clicking on START,  
SETTINGS, CONTROL PANEL and then double clicking on the  
DISPLAY icon.  
5. Click on the SETTINGS tab.  
6. Click the CHANGE DISPLAY TYPE button.  
7. Click CHANGE MONITOR TYPE button.  
8. Insert the Monitor Information diskette into drive A: and click the HAVE  
DISK button.  
9. Click ‘OK’.  
On LCD monitors, unlike  
CRTs, a faster refresh rate  
does not improve display  
quality. IBM recommends using  
a refresh rate of 60Hz non-  
interlaced.  
10. Choose IBM 9516 monitor and click OK. The files will be copied from  
the diskette.  
11. Close all open windows and remove the diskette.  
12. Reboot the system.  
The system will automatically select the maximum refresh rate and  
corresponding Colour Matching Profiles.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Setup for the PC  
Check the operating system installed on your PC and follow the instructions  
from the table below.  
Before carrying out  
this section it is very  
important that The Monitor  
Information Diskette for  
Windows 95 and Windows  
98 has been run. (See  
page 9).  
First follow auto  
setup on ....  
Then follow auto  
set-up on ....  
Operating System  
DOS  
page 11  
page 11  
page 11  
page 11  
page 11  
Windows 3.1  
Windows 95  
page 12  
page 12  
page 12  
page 13  
Windows NT  
Operating System/2 (OS/2)  
If your PC does not run  
with the setup option  
diskettes shipped with the  
monitor, refer to Quick Setup  
on page 29.  
Before you begin the auto setup for your PC :  
1. Make a backup copy of the setup option diskettes supplied with the  
monitor.  
2. Make sure the PC's video mode is set in the range of the supported  
screen resolution shown in the table on page 38.  
3. Perform the auto setup for each screen mode you use.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Setup for DOS  
1. Turn on the monitor first; then the PC.  
If the monitor is in standby  
mode (STANDBY ON), it  
may automatically turn off while  
you are waiting for it to warm up.  
If the message UNSUPPORTED VIDEO is displayed, or if nothing is displayed  
check:  
•
•
that the video interface cable is connected properly.  
the correct video adapter card is installed (see Video Adapters on page  
40).  
•
the correct supported display mode is selected for your PC.  
If you are using PC-DOS/V,  
change to U.S. mode by  
typing ‘CHEV US’ and pressing  
ENTER at the command prompt.  
2. Wait approximately 15 minutes, until the monitor warms up.  
3. Insert the diskette labelled ‘ Setup Option Diskette (for DOS / Windows /  
Windows NT)’ into the diskette drive.  
4. Display the command prompt screen of the DOS full-screen display:  
•
•
•
If Windows is installed, open the DOS prompt from the Program  
Manager to display the DOS full-screen.  
If the screen flickers,  
repeat the setup several  
times until the flicker is  
minimised, or adjust it manually  
by following Manual Setup on  
page 28.  
If OS/2 is installed, open the DOS full-screen display from the  
command prompt of OS/2.  
If only DOS is installed, the command prompt is displayed when the  
system is started.  
5. At the command prompt, type ‘A:’ and press ENTER.  
6. Type ‘TESTPATD’ and press ENTER. The color-bar pattern appears.  
7. Wait until the PRESS [ENTER] KEY message is displayed.  
8. Press ENTER to continue the auto setup procedure.  
9. The AUTO SETUP line changes to COMPLETED when auto setup is  
complete.  
If “AUTO SETUP COMPLETED” is not displayed, or the “AUTO SETUP FAILED”  
message appears, repeat the auto setup procedure several times. If auto setup  
continues to fail, complete the manual setup on page 28.  
10. Type ‘Exit’ at the command prompt to return to Windows.  
Now continue the setup for your operating system:  
Auto Setup for Windows 3.1, Windows 95, or Windows NT on page 12  
Auto Setup OS/2 on page 13  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Setup for Windows 3.1, Windows 95, or Windows NT  
Continued from Auto Setup for DOS on page 11  
11 Drag the icon bar and tool bar, if they are displayed, to the bottom of the  
If the monitor is in standby  
mode (STANDBY ON), it  
screen  
may automatically turn off while  
you are waiting for it to warm up.  
12. Insert the diskette labelled ‘ Setup Option Diskette (for DOS / Windows /  
Windows NT)’ into the diskette drive.  
13. Check the operating system installed on your PC and follow the  
instructions from the table below  
.
Operating  
system  
Step 1  
Step 2  
Step 3  
Step 4  
open  
Windows 3.1  
Program  
Manager  
click on File  
click on run  
open  
Program  
Manager  
Type  
‘A:\TESTPAT’  
Windows NT  
3.5  
click on File  
click on run  
click on Start  
click on Start  
click on Run  
click on Run  
Windows 95  
Windows NT  
4.0  
The size and diversity of the  
color pattern varies with the  
screen resolution.  
14. The color-bar pattern appears and auto setup starts.  
15. Position the mouse pointer at the bottom center of the screen. This  
allows auto setup to run properly.  
If the screen flickers, repeat  
the setup several times until  
the flicker is minimised, or adjust it  
manually by following Manual  
Setup on page 28.  
16. The AUTO SETUP line changes to COMPLETED when auto setup is  
completed.  
If “AUTO SETUP COMPLETED” is not displayed, or the “AUTO SETUP FAILED”  
message appears, repeat the auto setup procedure several times. If auto setup  
continues to fail, complete the Manual Setup on page 28.  
17. Press ALT+F4 to exit auto setup.  
You have completed the monitor setup.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Setup OS/2  
Continued from Auto Setup for DOS on page 11  
If the monitor is in standby  
mode (STANDBY ON), it  
may automatically turn off while  
you are waiting for it to warm up.  
11 If the WarpCenter Toolbar is permanently on, click the right mouse  
button on the WarpCenter Toolbar, click on Properties, Display Tab and  
‘Show only when mouse in center position’.  
12. Insert the diskette labelled ‘ Setup Option Diskette (for OS/2)’ into the  
diskette drive.  
13. Open the OS/2 full-screen window or an OS/2 window.  
14. At the command prompt type A: and press ENTER.  
15. Type TESTPATS and press ENTER.  
16. After approximately 1 minute, the color-bar pattern appears.  
17. Move the mouse pointer (and the icon bar and tool bar if they are  
displayed) to the bottom center of the screen to allow setup to run  
properly.  
The size and diversity of  
the color pattern varies with  
the screen resolution.  
18. The AUTO SETUP line changes to COMPLETED when auto setup is  
completed after 10 to 20 seconds.  
If “AUTO SETUP COMPLETED” is not displayed, or the “AUTO SETUP FAILED”  
message appears, repeat the auto setup procedure several times. If auto setup  
continues to fail, complete the Manual Setup on page 28.  
19. Press ALT+F4 to exit auto setup.  
If the screen flickers,  
repeat the setup several  
times until the flicker is  
minimised, or adjust it manually  
by following Manual Setup on  
page 28.  
You have completed the monitor setup.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Setup for the RS/6000  
If you are running AIXwindows on the RS/6000, go to Auto Setup for  
AIXwindows on page 15. Otherwise, check the following table for the type of  
Video Adapter used with the RS/6000:  
If you are using a Video  
Adapter other than those in  
the table, the setup option  
diskettes will not run on your RS/  
6000 (See Quick Setup on page  
29).  
Video Adapter Type  
Section  
Auto Setup for AIXwindows on  
GXT150P (RS/6000 Model 43P)  
page 15  
Auto Setup for AIXwindows on  
GXT 1000  
E15/S15  
page 15  
Auto Setup for AIXwindows on  
page 15  
If the screen resolution in  
the video signal on your  
RS/6000 is not 1280×1024, the  
setup option diskettes will not  
run on your RS/6000 (See  
Quick Setup on page 29).  
Auto Setup for the Gt3i, GXT150,  
or GXT150L Adapter on page 16  
Gt3i  
GXT150  
GXT150L  
Auto Setup for the GXT150M  
Adapter on page 18  
GXT150M  
(for AIX 3.2 Version 3.2.5.1 and  
later)  
Auto Setup for the GT4, GT4X,  
GT4I, or GT4XI Adapter on page 20  
GT4 (24 bit)  
GT4X (8 bit)  
GT4X (24 bit)  
GT4I (24 bit)  
GT4XI (8 bit)  
GT4XI (24 bit)  
Auto Setup for the GXT150P (RS/  
6000 Model 40P) Adapter on page  
22  
GXT150P  
(RS/6000 Model 40P)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Setup for AIXwindows  
1. Turn on the monitor, then the RS/6000. The screen remains blue until  
If the monitor is in standby  
mode (STANDBY ON), it  
might automatically turn off while  
you are waiting for it to warm up.  
the system is ready.  
If the message UNSUPPORTED VIDEO is displayed, or if nothing is displayed  
check:  
•
•
•
that the video interface cable is connected properly.  
the correct video adapter card is installed (see page 40).  
the correct supported display mode is selected for your PC.  
2. When the AIX desktop login screen is displayed, login as the root user,  
and start the common desktop environment (CDE) from the AIX  
command prompt. Type XINIT and press ENTER.  
3. Wait for about 15 minutes, until the monitor warms up.  
4. Start the terminal emulator. To start, click on the SUBPANEL BUTTON  
on the text editor control  
TERMINAL EMULATOR.  
on the front panel, and then select  
5. Type ‘cd /’ from the command prompt of the terminal emulator, and  
press ENTER.  
6. Type ‘df -k’ and press ENTER. Make sure that there is at least 60 KB of  
free space in the root directory.  
7. Insert the diskette labelled “Setup Option Diskette (for AIXwindows)” into  
the diskette drive. Type ‘tar -xvf /dev/fd0’ and press ENTER.  
If the screen flickers, repeat  
the setup several times until  
the flicker is minimised, or adjust  
it manually by following Manual  
Setup on page 28.  
8. Type ‘./xcolorbar’ and press ENTER.  
If ‘CAN’T ALLOCATE COLOR’ is displayed :  
•
•
•
•
Stop other programs.  
Enter the commands in step 7 again.  
Type ./xcolorbar and press Enter.  
If, after a few seconds, the setup main menu appears and starts  
automatically, go to step 12. If it does not appear and start automatically, go  
to the next step.  
9. The Auto Setup starts.  
10. The messages are automatically displayed in the following sequence:  
‘OFF-READY- START-COMPLETED’ and auto setup is complete.  
If “AUTO SETUP COMPLETED” is not displayed, or the “AUTO SETUP FAILED”  
message appears, repeat the auto setup procedure several times. If auto setup  
continues to fail, complete the Manual Setup on page 28.  
You have completed the monitor setup.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Setup for the Gt3i, GXT150, or GXT150L Adapter  
1. Turn on the monitor, then the RS/6000. The screen remains blue until  
the system is ready.  
If the monitor is in standby  
mode (STANDBY ON), it  
may automatically turn off while  
you are waiting for it to warm up.  
If the message UNSUPPORTED VIDEO is displayed, or if nothing is displayed  
check:  
•
•
•
that the video interface cable is connected properly.  
the correct video adapter card is installed (see page 40).  
the correct supported display mode is selected for your PC.  
2. When the AIX desktop login screen is displayed, login as the root user,  
and start the common desktop environment (CDE) from the AIX  
command prompt. Type ‘diag’ and press ENTER.  
3. Wait for about 15 minutes, until the monitor warms up.  
4. Press ENTER to display the Function Selection menu. Move the cursor  
to SERVICE AID.  
5. Press Enter. The Service Aids Selection menu appears.  
6. Press PAGEDOWN to display the second page of the menu. Move the  
cursor to DISPLAY TEST PATTERNS.  
7. Press ENTER and move the cursor and select the connected VIDEO  
ADAPTER.  
8. Press ENTER and move the cursor to THE COLOR-BAR PATTERN.  
9. Press ENTER and ENTER again to display the color-bar pattern.  
If ‘CAN’T ALLOCATE COLOR’ is displayed :  
•
•
•
•
Stop other programs.  
Enter the commands in step 7 again.  
Type ./xcolorbar and press Enter.  
If, after a few seconds, the setup main menu appears and starts  
automatically, go to step 12. If it does not appear and start automatically, go  
to the next step.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Press the Setup Switch on the back of the monitor and the setup main  
menu appears in front of the color-bar.  
11. Push one of the contrast  
control buttons. The messages are  
If the screen flickers, repeat  
the setup several times until  
the flicker is minimised, or adjust  
it manually by following Manual  
Setup on page 28.  
automatically displayed in the following sequence : ‘OFF-READY-  
START-COMPLETED’ and auto setup is complete.  
If “AUTO SETUP COMPLETED” is not displayed, or the “AUTO SETUP FAILED”  
message appears, repeat the auto setup procedure several times. If auto setup  
continues to fail, complete the Manual Setup on page 28.  
12. Press F3 to exit the color-bar pattern.  
13. Press the Setup Switch on the back of the monitor to turn off the setup  
main menu.  
You have completed the monitor setup.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Setup for the GXT150M Adapter  
For AIX 3.2 Version 3.2.5.1 and Later  
1. Turn on the monitor, then the RS/6000. The screen remains blue until  
the system is ready.  
If you are using more than  
one GXT150M Video  
Adapter - select the display with  
the following AIX commands, and  
then perform steps 5 to end. The  
x indicates the number of the  
adapter that displays the test  
pattern - chdisp -tx and dhdisp -  
dx.  
If the message UNSUPPORTED VIDEO is displayed, or if nothing is displayed  
check:  
•
•
•
that the video interface cable is connected properly.  
the correct video adapter card is installed (see page 40)  
the correct supported display mode is selected for your PC.  
2. When the AIX desktop login screen is displayed, log in as the root user,  
type ‘lslpp -h > /tmp/ptfcheck’ from the AIX command prompt, and  
press ENTER.  
3. Open the ‘/tmp/ptfcheck’ file with an editor or other tool. In the ‘/tmp/  
ptfcheck’ file, decide whether to apply the newest GXT150M PTF,  
based on the following conditions :  
If the monitor is in standby  
mode (STANDBY ON), it  
might automatically turn off while  
you are waiting for it to warm up.  
•
•
•
If the file does not include lines a, b, or c (not counting XX) : Do not  
apply the PTF.  
If the file does include lines a, b, or c (not counting XX), but there is  
also an added line : Do not apply the PTF.  
If the file includes lines a, b, or c (not counting XX), and if there is no  
added line : Apply the PTF.  
4. Type ‘rm -f /tmp/ptfcheck’ and press ENTER.  
5. Type ‘cd /’ and press ENTER.  
6. Type ‘df ’ and press ENTER. Make sure that there is at least 60 KB of  
free space in the root directory.  
7. Insert the diskette labelled “Setup Option Diskette (for GXT150M)” into  
the diskette drive. Type ‘tar -xvf /dev/rfd0’ and press ENTER.  
8. Type ‘./colorbar’ and press ENTER.  
9. Press ENTER. The color-bar pattern is displayed on the screen. Make  
sure that the monitor warms up (or more than 15 minutes have passed  
since you turned on the monitor).  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Press the Setup Switch on the back of the monitor and the setup main  
menu appears in front of the color-bar pattern.  
11. Push one of the contrast  
control buttons.  
12. The messages are automatically displayed in the following sequence :  
‘OFF-READY- START-COMPLETED’ and auto setup is complete.  
f the screen flickers, repeat  
the setup several times until  
the flicker is minimised, or adjust  
it manually by following Manual  
Setup on page 28.  
If “AUTO SETUP COMPLETED” is not displayed, or the “AUTO SETUP FAILED”  
message appears, repeat the auto setup procedure several times. If auto setup  
continues to fail, complete the Manual Setup on page 28.  
13. Press F3 to exit the color-bar pattern.  
14. Press the Setup Switch on the back of the monitor to turn off the setup  
main menu.  
You have completed the monitor setup.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Setup for the GT4, GT4X, GT4I, or GT4XI Adapter  
1. Turn on the monitor, then the RS/6000. The screen remains blue until  
the system is ready.  
If you cannot see the login  
prompt, adjust the  
brightness and contrast.  
If the message UNSUPPORTED VIDEO is displayed, or if nothing is displayed  
check:  
•
•
•
that the video interface cable is connected properly.  
the correct video adapter card is installed (see page 40).  
the correct supported display mode is selected for your PC.  
2. When the AIX desktop login screen is displayed, login as the root user,  
type ‘diag’ from the AIX command prompt, and press ENTER.  
3. Wait for about 15 minutes, until the monitor warms up.  
4. Press ENTER to display the Function Selection menu. Move the cursor  
to SERVICE AID.  
If the monitor is in standby  
mode (STANDBY ON), it  
may automatically turn off while  
you are waiting for it to warm up.  
5. Press ENTER. The Service Aids Selection menu appears.  
6. Press PAGEDOWN to display the second page of the menu. Move the  
cursor to DISPLAY TEST PATTERNS.  
7. Press ENTER and move the cursor and select the connected VIDEO  
ADAPTER.  
8. Press ENTER and move the cursor to THE COLOR-BAR PATTERN.  
9. Press ENTER and ENTER again to display the color-bar pattern.  
10. Press the Setup Switch on the back of the monitor and the setup main  
menu appears in front of the color-bar pattern.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. Press one of the contrast  
control buttons. The messages are  
If the screen flickers, repeat  
the setup several times until  
the flicker is minimised, or adjust  
it manually by following Manual  
Setup on page 28.  
automatically displayed in the following sequence :  
‘OFF-READY- START-COMPLETED’ and auto setup is complete.  
If “AUTO SETUP COMPLETED” is not displayed, repeat the auto setup  
procedure several times. If auto setup continues to fail, complete the Manual  
Setup on page 28.  
12. Press F3 to exit the color-bar pattern.  
13. Type CLEAR at the AIX command prompt and press ENTER to perform  
setup on black level.  
14. Push one of the brightness  
BLACK SETUP.  
control buttons and select the item  
15. Push one of the contrast  
control buttons. After about 10 seconds,  
the message ‘SAVE PARAMETERS?’ is displayed.  
If 'BLACK SETUP FAILED’ is displayed - if the message ‘SAVE  
PARAMETERS?’ is not displayed or BLACK SETUP does not start, do the  
following :  
•
Confirm that the screen is completely black except for the command  
prompt. If not, type ‘clear’ and press ENTER.  
•
Go back to step 15 and redo black setup.  
If black setup is not completed after several tries, adjust OFFSET R, OFFSET G,  
OFFSET B (see Specialist Controls on page 33).  
16. To save the settings for the monitor, push a contrast control  
button.  
To discard the settings, push one of the brightness control button.  
17. Press the Setup Switch on the back of the monitor to turn off the setup  
main menu.  
You have completed the monitor setup.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Setup for the GXT150P (RS/6000 Model 40P) Adapter  
1. Insert the ‘IBM RISC System/6000 Model 40P, System Management  
Service Diskette’ into drive A of the RS/6000 Model 40P Adapter. Turn  
on the power.  
If the message UNSUPPORTED VIDEO is displayed, or if nothing is displayed  
check:  
•
•
•
that the video interface cable is connected properly.  
the correct video adapter card is installed (see page 40)  
the correct supported display mode is selected for your PC.  
If the monitor is in standby  
mode (STANDBY ON), it  
may automatically turn off while  
you are waiting for it to warm up.  
2. When the Power Personal System panel is displayed, press F4. The  
screen remains blue until the system is ready.  
3. From the main menu of System Management Service, select ‘Test The  
Computer’. Then press ENTER.  
4. Wait for about 15 minutes, until the monitor warms up.  
5. In the Select Device Test menu, push the spacebar to erase the mark  
displayed with ‘Test All Subsystems’. Use the ↓ key to place the cursor  
on GTP150P. Push the spacebar to select GXT150P. Then press F6.  
6. Use the ↓ key to select ‘Run Monitor Service Aids’ in the IBM GXT150P  
Video Adapter menu. Press ENTER.  
7. When GXT150P Information is displayed, press ENTER.  
8. When the color-bar pattern is displayed, push the setup switch on the  
back of the monitor. The setup main menu appears on top of the color-  
bar pattern.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Press one of the contrast  
control buttons. The messages are  
automatically displayed in the following sequence : ‘OFF-READY-  
START-COMPLETED’ and auto setup is complete.  
10. Press the setup switch on the back of the monitor to turn off the setup  
main menu.  
If the screen flickers, repeat  
the setup several times until  
the flicker is minimised, or adjust  
it manually by following Manual  
Setup on page 28.  
If “AUTO SETUP COMPLETED” is not displayed, or the “AUTO SETUP FAILED”  
message appears, repeat the auto setup procedure several times. If auto setup  
continues to fail, complete the Manual Setup on page 28.  
11. Press ENTER to exit the color-bar pattern. GXT150P Information is  
displayed again.  
12. Press ENTER. The entire screen is displayed in red. Press ENTER.  
13. Press ENTER six times. Make sure the entire screen is displayed in the  
following sequence:  
Green → blue → white → black → 8× 6 grid pattern → 8× 10 grid  
pattern.  
14. When GXT150P Information is displayed, press ENTER.  
15. When the IBM GXT150P Video Adapter menu is displayed, press ESC.  
16. When the Test Completed message is displayed, press ENTER.  
17. When Select Device to Test is displayed, press ESC to exit.  
18. When the System Management Service panel is displayed, press F3.  
19. Select Reboot.  
20. Remove the diskette from drive A.  
21. When “Do you want to restart the computer?” is displayed, select YES  
and press ENTER.  
You have completed the monitor setup.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Setup for the Sun Workstation  
If you use OpenWindows with the screen resolution 1280×1024, perform auto  
setup as follows. Otherwise, perform Quick Setup on page 29  
The screen resolution 1280  
×1024 is available in some  
Sun video cards. When you use  
such a card, change the standard  
screen resolution from 1152x900  
to1280×1024ontheworkstation.  
1. Set the screen resolution to 1280×1024. Refer to your Sun workstation  
manuals, Open Windows manuals, or online help to set the mode.  
2. Turn on the monitor. Turn on the Sun workstation.  
If the message UNSUPPORTED VIDEO is displayed, or if nothing is displayed  
•
•
check that the video interface cable is connected properly.  
The screen resolution and the vertical frequency of Sun workstation are  
within the supported screen resolutions in the table on page Supported  
Screen Addressability. If not, refer to your Sun workstation manuals,  
Windows manuals, or online help to set the resolution and frequency to the  
values of the table.  
If the monitor is in standby  
mode (STANDBY ON), it  
might automatically turn off while  
you are waiting for it to warm up.  
3. Log in as the root user. If you start the system from the command  
prompt, start the Open Windows after login.  
4. Wait for about 15 minutes, until the monitor warms up.  
It may be necessary to  
attach a CRT monitor until  
the video adapter has been set  
up to a supported video mode.  
5.  
If the terminal emulator in the command prompt window has not started  
yet, start the emulator.  
6. Type ‘cd /’ from the command prompt of the terminal emulator, and  
press ENTER.  
7. Insert the diskette labelled ‘Setup Option Diskette (for Solaris)’ into the  
Sun workstation's diskette drive A.  
8. Type ‘tar -xvf /dev/fd0’ and press ENTER.  
9. Type ‘./xcolorbar’ and press ENTER.  
If ‘CAN’T ALLOCATE COLOR’ is displayed :  
•
•
•
Stop other programs.  
Enter the commands in step 7 again.  
Type ./xcolorbar and press Enter.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. When the color-bar pattern appears, push the setup switch on the back  
of the monitor. The setup main menu appears on top of the color-bar  
pattern.  
11. Push one of the contrast  
control buttons.  
12. The messages are automatically displayed in the following sequence :  
OFF-READY-START-COMPLETED’ and auto setup is complete. The  
screen might be distorted during setup. This is not a problem.  
If the screen flickers, repeat  
the setup several times until  
the flicker is minimised, or adjust  
it manually by following Manual  
Setup on page 28.  
If “AUTO SETUP COMPLETED” is not displayed, or the “AUTO SETUP FAILED”  
message appears, repeat the auto setup procedure several times. If auto setup  
continues to fail, complete the Manual Setup on page 28.  
13. The color-bar pattern appears. The colors must be bright and clear.  
14. There is no interference in the upper low frequency section, and the  
boundary between black and white is clear.  
15. Press any key to exit the color-bar pattern.  
16. Push the setup switch on the back of the monitor to turn off the setup  
main menu.  
You have completed the monitor setup.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Setup for the HP Workstation  
1. Turn on the power of the monitor, then the workstation.  
The device names ‘fd0’ may  
vary by workstation model.  
You can list the device names by  
typing ‘ls /dev/floppy/’ and  
pressing RETURN.  
If the message UNSUPPORTED VIDEO is displayed, or if nothing is displayed  
•
•
check that the video interface cable is connected properly.  
The screen resolution and the vertical frequency of the HP Sun workstation  
are within the supported screen resolutions in the table page 38 Supported  
Screen Addressability. If not, refer to your HP workstation manuals,  
Windows manuals, or online help to set the resolution and frequency to the  
values of the table.  
2. Login as a route user.  
The standard commands of  
uncompress and xwud are  
needed to run this shell script.  
3. Wait about 15 minutes until the workstation reaches the normal  
operating temperature.  
4. If the terminal emulator (command prompt window) has not yet started,  
start it now.  
5. Type ‘cd \’ at the terminal emulator command prompt and then press  
RETURN.  
6. Insert the diskette labelled ‘Setup Option Diskette (For HP)’ into the  
diskette drive. Type ‘tar -xvf /dev/fd’ and press RETURN.  
7. Type ‘./xcolorbar’ and press RETURN. The color-bar pattern appears.  
8. Press the setup switch on the back of the monitor. The setup main  
menu appears in front of the color-bar pattern.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Select AUTO SETUP and press the contrast button  
. “OFF”  
automatically changes to “READY” and then to “COMPLETED,” and  
setup ends automatically. The screen might be distorted during setup.  
This is not a problem.  
If the screen flickers, repeat  
the setup several times until  
the flicker is minimised, or adjust  
it manually by following Manual  
Setup on page 28.  
If “AUTO SETUP COMPLETED” is not displayed, or the “AUTO SETUP FAILED”  
message appears, repeat the auto setup procedure several times. If auto setup  
continues to fail, complete the Manual Setup on page 28.  
10. Press the setup switch on the back of the monitor to exit the setup main  
menu.  
11. Press ‘q’ to end the color pattern.  
12. Push the setup switch on the back of the monitor to turn off the setup  
main menu.  
13. Enter the following if you no longer need the files in the hard disk :  
•
•
rm xbar.xwd  
rm xcolorbar  
You have completed the monitor setup.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manual Setup  
Normally, you can complete the setup procedure using auto setup. However,  
if your screen image is still distorted after you perform auto setup, perform  
manual setup.  
If the monitor is in standby  
mode (STANDBY ON), it  
might automatically turn off while  
you are waiting for it to warm up.  
1. Wait for about 15 minutes, until the monitor warms up.  
2. Display the image you most frequently use on the screen.  
3. Push the setup switch on the back of the monitor.  
4. Push one of the brightness  
control buttons and select the item  
CLOCK in Intermediate Controls on page 32. Then push one of the  
contrast  
control buttons to minimise the number of vertical lines on  
the screen.  
5. Push one of the brightness  
control buttons, and select the item H-  
POSI to adjust the horizontal display position. Likewise, select the item  
V-POSI to adjust the vertical display position.  
6. Push one of the brightness  
PHASE, and adjust the contrast to reduce the distortion on the screen.  
7. Select SAVE. Then push one of the contrast control buttons to save  
control buttons and select the item  
the settings. The color of the characters “SAVE” changes from red to  
yellow, and back to red again.  
8. Push the setup switch on the back of the monitor to exit the menu.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
This procedure does not display a color-bar pattern before the setup main  
menu. To obtain better image quality, you should perform auto setup  
according to the procedures on the preceding pages with the setup option  
diskettes for PC-DOS, Window 3.1, Windows 95, Windows NT, OS/2, RS/  
6000, AIXWindows, or OpenWindows on Sun Workstation (if the diskettes do  
not run, perform this quick setup).  
Check that the screen  
resolution and the  
frequencies are within the  
Supported Screen  
Addressability on page 38. If  
not, change the settings on the  
computer to set them within the  
range.  
For the HP Workstation, if you are unable to perform auto-setup with the  
diskettes, perform the quick setup without them.  
You need a full screen  
image to perform proper  
auto setup. You also need a  
clear contrast between the  
brightest part of the screen and  
the darkest for correct  
1. Turn on the monitor and the System Unit and wait for about 15 minutes  
until the machine warms up.  
2. Start the operating system on the System Unit and display a full-screen  
image.  
adjustment. Otherwise, the  
screen may flicker.  
3. Push the setup switch on the back of the monitor. The setup main menu  
appears.  
If the “Save Parameters?”  
message is not displayed or  
the auto setup value “START”  
does not change, push the  
contrast control button to exit  
auto setup and go back to step 4.  
Display another full-screen  
image and redo auto setup. If  
auto setup is not completed after  
several tries, perform Manual  
Setup on page 28.  
If you are using a  
workstation, the screen  
appears greenish because the  
black level is shifted due to the  
difference of the voltage level of  
the video signals. If this  
happens, adjust OFFSET G in  
the Specialist Controls on page  
33.  
4. Push one of the brightness control  
5. Push one of the contrast control  
buttons to select AUTO SETUP.  
buttons. After about 10 seconds,  
the message “Save parameters?” is displayed.  
6. To save the settings for the monitor, push a contrast control  
button.  
To discard the settings (because some problem such as a screen flicker  
occurs), push a brightness control button.  
7. If, after you save the settings, the display is still distorted, adjust  
“PHASE” and “CLOCK” in Manual Setup on page 28.  
8. Push the setup switch on the back of the monitor to turn off the setup  
main menu.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User controls  
Front of screen controls  
The front of screen user controls allow the user to turn the monitor on and off,  
adjust the brightness and contrast of the monitor to meet the users  
preferences, and also to gain access to intermediate and advanced On-  
Screen Display Controls.  
Icon  
Control  
Description  
Power Switch  
Switches the monitor on and off  
Power Indicator  
Standby indicator  
Contrast Control  
Green Light  
Green Light  
Adjust contrast between  
foreground and background  
Brightness Control  
Adjusts background brightness  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-screen display (OSD) controls  
To display the OSD, press the setup switch on the back of the monitor as shown.  
Menu  
+
-
Brightness  
Contrast  
There are eight menus within the OSD. These menus contain the following functions which can be divided  
into four levels of adjustment : basic, intermediate, advanced and specialised. The final menu  
“Information” gives the user information regarding their monitor.  
Basic Controls  
Effect of  
control  
Function  
Location  
Description  
Menu 1 of 8  
OFF / ON  
‘AUTO SETUP - OFF’ is displayed. Start auto  
setup. ‘START’-’COMPLETED’ are displayed in  
sequence until auto setup is complete.  
AUTO  
SETUP  
Menu 2 of 8  
OFF, 5 to 60  
MINS, DPMS  
Set the number of minutes the monitor is out of use  
before automatically entering the power-saving  
mode. Specify OFF if you do not use this function.  
STANDBY  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Intermediate Controls  
Effect of  
control  
Function  
CLOCK  
Location  
Description  
Menu 3 of 8  
Menu 3 of 8  
+........MHz......- Adjust this parameter to suppress the display of  
vertical stripes.  
0..................23 When there are visual noises on the edges of  
characters and graphics, adjust this parameter to  
suppress the noise.  
PHASE  
Menu 6 of 8  
Menu 6 of 8  
Menu 7 of 8  
Moves image left or right.  
H-POSI  
V-POSI  
Moves image up or down.  
YES / NO  
Use this parameter to restore all the values to the  
orginal settings when the monitor was shipped.  
SYSTEM  
RESET  
Advanced Controls  
Effect of  
control  
Function  
Location  
Description  
Menu 6 of 8  
Menu 6 of 8  
Adjusts image width.  
H-SIZE  
V-SIZE  
Adjusts image height.  
To display a screen with resolution less than  
1280×1024 (the optimum resolution of the monitor),  
select the optimum size you want by specifying one  
of the following :  
Menu 3 of 8  
ON / OFF /  
USER  
EXPAND-  
SION  
ON: Displays a full screen. This is the normal  
selection.  
OFF: Displays the screen specified by your PC.  
USER: Enables you to set the screen size by  
specifying H-size and V-size. This setting can be  
set and saved for each screen resolution.  
Menu 3 of 8  
Menu 1 of 8  
0................255 Adjust to eliminate some of the high frequency  
noise in the video signal.  
SHARP  
OFF / ON  
For DOS, Windows, OS/2, or AIX windows, to  
enable auto setup to start automatically, specify ON.  
This is the normal setting.  
AUTO  
DETECT  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specialist Controls  
Effect of  
control  
Function  
Location  
Description  
Menu 4 of 8  
Menu 4 of 8  
Menu 4 of 8  
Menu 5 of 8  
0................255 Adjusts the red hue level of the screen.  
0................255 Adjusts the green hue level of the screen.  
0................255 Adjusts the blue hue level of the screen.  
RED  
GREEN  
BLUE  
0................255 When there is red noise on the black part of the  
screen, adjust this parameter to suppress it.  
OFFSET R  
Menu 5 of 8  
Menu 5 of 8  
0................255 When there is green noise on the black part of the  
screen, adjust this parameter to suppress it.  
OFFSET G  
OFFSET B  
0................255 When there is blue noise on the black part of the  
screen, adjust this parameter to suppress it.  
To adjust the black level of the screen during auto  
BLACK  
SETUP  
Menu 1 of 8  
ON/OFF  
setup if the monitor is used with the RS/6000 and  
GT4 Adapter, select this item. This only works with  
the screen resolution 1280×1024.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information  
Function  
Location  
Description  
Menu 8 of 8  
The frequency of the video signal (horizontal sync  
signal) from your PC (KHz).  
H-FREQUENCY  
V-FREQUENCY  
Menu 8 of 8  
Menu 8 of 8  
The frequency of the video signal (vertical sync signal,  
or refresh rate) from your PC (Hz).  
The polarity of the video signal from your PC.  
H stands for the horizontal sync signal, and V stands for  
the vertical sync signal.  
SYNC POLARITY  
Menu 8 of 8  
Menu 8 of 8  
Menu 8 of 8  
The type of the video signal from your PC.  
SYNC TYPE  
The resolution of the video signal from your PC.  
RESOLUTION  
The version number of the control program installed in  
the monitor.  
SOFTWARE VERSION  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If you suspect something is not working correctly, you should :  
1. Turn on the computer and monitor.  
2. Set the brightness  
control to the proper position.  
3. Ensure that all cables are securely connected.  
The LCD contains over  
3,900,000 thin-film  
4. Disable standby mode if it is enabled. Push the setup switch on the  
back of the monitor to determine whether standby mode is enabled.  
transistors (TFTs). A small  
number of missing, discolored, or  
lighted dots may be present on  
the screen, which is an intrinsic  
characteristic of the TFT LCD  
technology and is not an LCD  
defect.  
5. Disable the computer's screen saver program if it is enabled.  
6. Run the auto setup procedure described in Configuring your Monitor  
on page 8  
7. If there is screen noise, adjust the PHASE parameter in the  
Intermediate Controls on page 32.  
8. Adjust the CLOCK parameter in the Intermediate Controls on page 32  
to suppress the display of vertical stripes.  
9. If you are using an RS/6000 with composite output function, do not  
specify ‘DPMS’ to the STANDBY parameter in the Basic Controls on  
page 31.  
10. To restore all the auto setup settings to the original values in effect when  
the monitor was shipped, perform SYSTEM RESET in the Intermediate  
Controls on page 32, or press each minus button of the brightness and  
the contrast control simultaneously and turn on the monitor. Both LED  
indicators turn on and off, and all settings are restored.  
11. Set the screen mode to the Supported Screen Addressability in the  
table on page 38.  
12. Perform AUTO SETUP for each display mode (each screen resolution).  
13. On this monitor, different from a CRT, faster refresh rate does not make  
the screen quality better. Using the monitor with a refresh rate of 60 Hz  
with noninterlace is recommended.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Further Help  
If you are unable to correct the problem yourself, you may seek further help  
as follows:  
Call the IBM HELPCENTER.  
In the US call 1-800-772-2227  
In Canada call 1-800-565-3344  
In other countries contact your dealer, retailer, or other IBM authorized  
Servicer.  
Before calling, please have available as much of the following information as  
possible:  
1. Model and serial number from the label on the front of your monitor.  
2. Purchase receipt.  
3. Description of problem.  
4. Computer type and model.  
If possible, stay by your  
computer. Your Technical  
Support Representative may wish  
to go through the problem with  
you during the call.  
5. System configuration (hardware fitted, etc.).  
6. System BIOS version number.  
7. Operating System and version number.  
8. Display driver version number.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
RGB input connector  
BNC jack  
Video input impedance (RGB)  
Video amplification  
75 ohms  
0.7V p-p , 1.0V p-p (composite)  
Input voltage (AC Adapter)  
100 to 127 V rms 50/60 Hz  
200 to 240 V rms 50/60 Hz  
Power dissipation (max)  
55 W  
8 W  
Power dissipation (in power-off  
mode)  
Some types of composite  
sync signals are not  
supported.  
Sync Signal Type  
The following Sync signal types are supported :  
•
•
•
Separate sync (TTL level).  
Sync on green *.  
Composite sync (TTL level).  
* Horizontal sync pulses must not be suppressed during the vertical sync  
period.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Supported Screen Addressability  
The following table shows the supported screen resolutions :  
The input signal to this  
monitor should correspond  
with the screen resolutions,  
Hsync frequencies and Vsync  
frequencies shown in the table.  
Screen Resolution  
Hsync  
(KHz)  
Type  
Vsync (Hz)  
(H × V)  
640 × 350 (NI)  
640 × 400 (NI)  
640 × 480 (NI)  
720 × 350 (NI)  
720 × 400 (NI)  
800 × 600 (NI)  
800 × 600 (I)  
30 – 40  
69 – 88  
55 – 88  
59 – 120  
69 – 88  
55 – 88  
55 – 120  
43 – 50  
73 – 75  
59 – 100  
40 – 50  
45 – 50  
30 – 40  
30 – 66  
30 – 40  
30 – 40  
34 – 76  
30 – 40  
48 – 50  
48 – 80  
30 – 40  
40 – 60  
VGA  
SVGA  
832 mode  
832 × 624 (NI)  
1024 × 768 (NI)  
1024 × 768 (I)  
XGA  
1152 × 864 (I)  
1152 × 882 (I)  
1152 × 864 (NI)  
1152 × 870 (NI)  
1152 × 882 (NI)  
40 – 60  
60 – 90  
60 – 90  
60 – 90  
45 – 50  
60 – 90  
60 – 90  
60 – 90  
SUN and others  
1152 × 900 (NI)  
1280 ×1024 (I)  
1280 × 1024 (NI)  
60 – 90  
40 – 60  
64 – 80  
60 – 90  
40 – 50  
60 – 75  
SXGA  
Notes  
(NI): Noninterlaced (I): Interlaced  
The resolutions shown in bold characters (1152x864, 870, 882) are  
displayed with 1152x900.  
All values in this table assume a video frequency of 135 MHz or less.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Default Preset Timing  
The monitor retains the following timing parameters for ‘Clock’, ‘Hsync’,  
‘Vsync’ and “Total Dots’ as default values. The monitor automatically selects  
the corresponding values to the video signal from your PC.  
The Hsync and Vsync  
frequencies in this table are  
not the only ones to be  
displayed. Refer to the table on  
page 38 for the supported  
frequencies. The parameters  
that you set through AUTO  
SETUP are saved in the monitor  
memory. Up to 25 user settings  
can be stored.  
.
ScreenResolution  
Horiz x Vert  
Timing  
Clock MHz)  
25.18  
Hsync (KHz)  
31.47  
31.47  
31.47  
37.86  
37.50  
35.00  
35.16  
37.88  
48.08  
46.88  
49.73  
35.52  
48.36  
56.48  
60.02  
58.14  
60.24  
44.88  
59.94  
67.29  
68.77  
61.85  
71.81  
63.17  
63.45  
63.63  
70.75  
79.98  
49.95  
71.69  
81.13  
Vsync (Hz)  
70.09  
59.94  
70.09  
72.81  
75.00  
66.67  
56.25  
60.32  
72.19  
75.00  
74.55  
43.48  
60.00  
70.07  
75.03  
72.00  
74.93  
47.34  
59.98  
74.77  
75.00  
66.00  
76.64  
59.77  
60.02  
60.26  
67.00  
75.03  
43.43  
67.19  
76.11  
Total Dots (HxV)  
800 × 449  
640 × 400  
640 × 480  
25.18  
800 × 525  
720 × 400  
28.32  
900 × 449  
640 × 480  
31.50  
832 × 520  
640 × 480  
31.50  
840 × 500  
640 × 480  
30.24  
864 × 525  
800 × 600  
36.00  
1024 × 625  
1056 × 628  
1040 × 666  
1056 × 625  
1152 × 667  
1264 × 817  
1344 × 806  
1328 × 806  
1312 × 800  
1376 × 808  
1328 × 804  
1448 × 9470  
1456 × 916  
1600 × 900  
1456 × 915  
1528 × 937  
1504 × 937  
1765 × 1057  
1765 × 1057  
1760 × 1056  
1760 × 1056  
1688 × 1066  
1600 × 1149  
1632 × 1067  
1664 × 1066  
800 × 600  
40.00  
800 × 600  
50.00  
800 × 600  
49.50  
832 × 624  
57.28  
1024 × 768 (I)  
1024 × 768  
1024 × 768  
1024 × 768  
1024 × 768  
1024 × 768  
1152 × 864 (I)  
1152 × 864  
1152 × 864  
1152 × 870  
1152 × 900  
1152 × 900  
1280 × 1024  
1280 × 1024  
1280 × 1024  
1280 × 1024  
1280 × 1024  
1280 × 1024 (I)  
1280 × 1024  
1280 × 1024  
(I): Interlace mode  
44.90  
65.00  
75.00  
78.75  
80.00  
80.00  
64.99  
80.00  
107.67  
100.13  
94.50  
108.00  
111.52  
112.00  
112.00  
120.00  
135.00  
79.92  
117.00  
135.00  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
txteng.book Page 40 Friday, April 3, 1998 3:28 PM  
Video Adapters  
Adapters for RS/6000  
The following are examples of Video Adapters for RS/6000 :  
•
•
POWER Gt3i Video Adapter  
POWER Gt4, POWER Gt4x, POWER Gt4e, POWER Gt4i, POWER Gt4xi  
Video Adapters  
•
POWER GXT150, POWER GXT150M, POWER GXT150L, POWER  
GXT150P Video Adapters  
•
•
•
•
•
•
•
POWER GXT500, POWER GXT500D Video Adapters  
POWER GXT1000 Video Adapter  
POWER GXT110P Video Adapter  
POWER GXT250P, POWER GXT255P Video Adapters  
POWER GXT500P, POWER GXT550P Video Adapters  
POWER GXT800P Video Adapter  
E15/S15 Video Adapter  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
txteng.book Page 41 Friday, April 3, 1998 3:28 PM  
PC Video Adapters  
The following are examples of Video Adapters for PCs :  
#9 FX Motion 771 Video Adapter (Number Nine Visual Tec. Co.)  
#9 Imagine 128 Pro Series 1 (Number Nine Visual Tec. Co.)  
ATI 3D EXPRESSION  
•
•
•
•
•
MGA Millenium 4 MB VRAM (Matrox Graphics Inc.)  
MGA Mystique (Matrox Graphics Inc.)  
PC750, PC720, PC330, Aptiva series, or other IBM PCs that have installed  
the following video chips or the Millenium video cards manufactured by  
Matrox Graphics Inc.  
•
•
•
•
•
•
ATI 3D RAGE  
Cirrus GD5436  
Cirrus GD5446  
S3 Vision 864  
S3 Trio 64V+  
Trident 9680XGI  
NEC PC-98 series only, which supports the mode of the 640×400 screen  
resolution and the 31.5 KHz horizontal frequency.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
txteng.book Page 42 Friday, April 3, 1998 3:28 PM  
Video Cables  
For PC and Sun workstations:  
Connector to  
System Unit  
Connector to  
9516 Monitor  
System  
Part Number  
PC  
58F2901  
15 pin D-Sub  
For Sun  
5 x BNC  
Sun workstation Video cable for  
Sun  
5 x BNC or 4 x  
BNC  
For RS/6000:  
Connector  
to 9516  
Monitor  
Graphic  
Adapter  
Part  
Number  
Feature Connector  
Number to System  
E15  
58F2901  
58F2903  
58F2901  
09G3539  
09G3539  
39H8682  
09G3539  
09G3539  
58F2901  
09G3539  
58F2901  
4217  
N/A  
15-D  
5×BNC  
3×BNC  
5×BNC  
3×BNC  
3×BNC  
3×BNC  
3×BNC  
3×BNC  
5×BNC  
3×BNC  
5×BNC  
GT3/GT4 series  
GXT110P  
13W3  
15-D  
4217  
4214  
4214  
4239  
4214  
4214  
4217  
4214  
4217  
GXT150 series  
GXT150M  
13W3  
13W3  
15-D  
GXT250P/255P  
GXT500/500D  
GXT500P/550P  
GXT800P  
13W3  
13W3  
15-D  
GXT1000  
13W3  
15-D  
S15  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
compl.fm Page I Friday, April 3, 1998 6:29 PM  
&RPSOLDQFHV  
Federal  
This equipment has been tested and found to comply with the limits for a  
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference when  
the equipment is operated in a commercial environment. This equipment  
generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instruction manual, may cause harmful  
interference to radio communications. Operation of this equipment in a  
resedential area is likely to cause harmful interference in which case the user  
will be required to correct the interference at his own expense.  
Communications  
Commission (FCC)  
Statement  
Properly shielded and grounded cables and connectors must be used in  
order to meet FCC emission limits. IBM is not responsible for any radio or  
television interference caused by using other than recommended cables and  
connectors or by unauthorized changes or modifications to this equipment.  
Unauthorized changes or modifications could void the user’s authority to  
operate the equipment.  
This device complies with Part 15 of the FCC Rules. Operation is subject to  
the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
Power Cords  
For your safety, IBM provides a power cord with a grounded attachment plug  
to use with this IBM product. To avoid electrical shock, always use the power  
cord and plug with a properly grounded power outlet.  
IBM power cords used in the United States and Canada are listed by the  
Underwriters Laboratories (UL) and certified by the Canadian Standards  
Association (CSA).  
For units intended to be operated at 115 volts: Use a UL listed and CSA  
certified cord set consisting of a minimum 18 AWG, type SVT or SJT, three  
conductor cord, a maximum of 4.5 metres (15 feet) in length and a parallel  
blade, grounding type attachment plug rated 15 amperes, 125 volts.  
For units intended to be operated at 230 volts (U.S. use): Use a UL listed and  
CSA certified cord set consisting of a  
minimum 18 AWG, type SVT or SJT, three conductor cord, a maximum of 4.5  
metres (15 feet) in length and a tandem blade, grounding type attachment  
plug rated 15 amperes 250 volts.  
I
Download from Www.Somanuals.com. All Manuals Search And Download.  
compl.fm Page II Friday, April 3, 1998 6:29 PM  
For units intended to be operated at 230 volts (outside the U.S.): Use a cord  
set with a grounding type attachment plug rated 13 amperes (minimum), 250  
volts. The cord set should be marked <HAR> and have the appropriate safety  
approvals for the country in which the equipment will be installed.  
As an ENERGY STAR Partner, IBM Corporation has determined that this  
product meets the ENERGY STAR guidelines for energy efficiency.  
This monitor complies with TCO’92 guidelines.  
MPRII  
This product complies with Swedish National Council for Metrology (MPR)  
standards issued in December 1990 (MPRII) for very low frequency (VLF)  
and extremely low frequency (ELF).  
Hinweise  
Gemäß der Amtsblätter des BMPT Nm. 61/1991 und 6/1992 wird der  
Betreiber darauf aufmerksam gemächt, daß die von ihm mit diesem Gerät  
zusammengestellte Anlage auch den technischen Bestimmungen dieser  
Amtsblätter genügen muß.  
Aus ergonomischen Gründen wird empfohlen, die Grundfarbe Blau nicht auf  
dunklem Untergrund zu verwenden (schlechte Erkennbarkeit,  
Augenbelastung bei zu geringem Zeichenkontrast).  
Aus ergonomischen Gründen sollten nur Darstellungen auf dunklem  
Hintergrund bei Vertikalfrequenzen ab 60 Hz (ohne Zeilensprung) benutzt  
werden.  
Die Konvergenz des Bildes kann sich auf Grund des Magnetfeldes am Ort  
der Aufstellung aus der korrekten Grundeinstellung verändern. Zur Korrektur  
empfiehlt es sich deshalb, die Regler an der Frontseite für H STAT und V  
STAT so einzustellen, daß die getrennt sichtbaren Farblinien für Rot. Grün  
und Blau bei z.B. der Darstellung eines Buchstabens zur Deckung  
(Konvergenz) gelangen. Siehe hierzu auch die Erklärungen zu H STAT und V  
STAT.  
II  
Download from Www.Somanuals.com. All Manuals Search And Download.  
compl.fm Page III Friday, April 3, 1998 6:29 PM  
Industry Canada  
Compliance  
Statement  
This Class A digital apparatus meets the requirements of the Canadian  
Interference-Causing Equipment Regulations.  
Cet appareil numérique de la classe A respecte toutes les exigences du  
Règlement sur le matériel brouilleur du Canada.  
European Union (EU)  
Statement  
This product has been tested and found to comply with the limits for Class A  
Information Technology Equipment according to CISPR 22 / European  
Standard EN 55022. The limits for Class A equipment were derived for  
commercial and industrial environments to provide reasonable protection  
against interference with licensed communication devices.  
Warning: This is a Class A product. In a domestic environment this product  
may cause radio interference in which case the user may be required to take  
adequate measures.  
Properly shielded and grounded cables and connectors must be used in  
order to reduce the potential for causing interference to radio and TV  
communications and to other electrical or electronic equipment. Such cables  
and connectors are available from IBM authorised dealers.  
In accordance with EN 50082-1 1992, Performance Criterion A:, it should be  
noted that in the presence of certain electromagnetic fields, some screen  
jitter may be observed.  
NOM  
IBM de México, S.A.  
IBM 9516-Bxx TFT LCD Color Monitor  
Planta de Manufactura  
IBM Japan, Ltd. Yasu  
800, Ichimiyake, Yasu-cho, Yasu-gun  
Shiga, 520-23  
Hecho en Japon  
NOM-018  
Consumo de Corriente 1.5 A  
Frecuencia de Operacion 50/60 Hz  
Rension de Alimentacion 100 - 127 V, 200 - 240 V  
III  
Download from Www.Somanuals.com. All Manuals Search And Download.  
compl.fm Page IV Friday, April 3, 1998 6:29 PM  
:DUUDQW\  
USA., Canada and Puerto Rico Statement of Limited Warranty  
The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines  
you originally purchase for your use and not for resale, from IBM or an IBM authorized reseller.  
The term “Machine” means an IBM machine, its features, conversions, upgrades, elements, or  
accessories, or any combination of them. Machines are subject to these terms only if purchased  
in the United States or Puerto Rico, or Canada and located in the country of purchase. If you  
have any questions, contact IBM or your reseller.  
Machine:  
IBM 9516 LCD Color Monitors  
3 Years  
Warranty Period *:  
*
Elements and accessories are warranted for three months.  
Contact your place of purchase for warranty service information.  
Production Status  
Each Machine is manufactured from new parts, or new and serviceable used parts (which  
perform like new parts). In some cases, the Machine may not be new and may have been  
previously installed. Regardless of the Machine’s production status, IBM’s warranty terms apply.  
The IBM Warranty  
IBM warrants that each Machine 1) is free from defects in materials and workmanship and 2)  
conforms to IBM’s Official Published Specifications. IBM calculates the expiration of the warranty  
period from the Machine’s Date of Installation. The date on your receipt is the Date of  
Installation, unless IBM or your reseller informs you otherwise.  
During the warranty period, IBM or your reseller will provide warranty service under the type of  
service designated for the Machine and will manage and install engineering changes that apply  
to the Machine. IBM or your reseller will specify the type of service.  
For a feature, conversion or upgrade, IBM or your reseller may require that the Machine on which  
it is installed be 1) the designated, serial-numbered Machine and 2) at an engineering-change  
level compatible with the feature, conversion, or upgrade. Some of these transactions (called “Net-  
Priced” transactions) may include additional parts and associated replacement parts that are  
provided on an exchange basis. All removed parts become the property of IBM and must be returned  
to IBM.  
Replacement parts assume the remaining warranty of the parts they replace.  
If a Machine does not function as warranted during the warranty period, IBM or your reseller will  
repair or replace it (with a Machine that is at least functionally equivalent) without charge. If IBM  
or your reseller is unable to do so, you may return it to your place of purchase and your money  
will be refunded.  
If you transfer a Machine to another user, warranty service is available to that user for the  
remainder of the warranty period. You should give your proof of purchase and this Statement to  
that user.  
Warranty Service  
To obtain warranty service for the Machine, contact your reseller or call IBM. In the United  
States, call IBM at 1-800-772-2227. In Canada call IBM at 1-800-565-3344. You may be  
required to present proof of purchase.  
IV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
compl.fm Page V Friday, April 3, 1998 6:29 PM  
The service may be 1) a “Repair” service at your location (called “On-Site”) or at one of IBM’s or  
a reseller’s service locations (called “Carry-in”) or 2) an “Exchange” service, either On-site or  
Carry-in. If in doubt, contact your point of sale.  
When a type of service involves the exchange of a Machine or part, the item IBM or your reseller  
replaces becomes its property and the replacement becomes yours. The replacement may not  
be new, but will be in good working order, and at least functionally equivalent to the item  
replaced.  
It is your responsibility to:  
1. obtain authorization from the owner (for example, your lessor) to have IBM or your reseller  
service a Machine that you do not own;  
2. where applicable, before service is provided -  
a. follow the problem determination, problem analysis and service request procedures that  
IBM or your reseller provide.  
b. secure all programs, data and funds contained in a Machine.  
c. inform IBM or your reseller of changes in a Machine’s location, and  
d. for a Machine with exchange service, remove all features, parts, options, alterations, and  
attachments not under warranty service. Also the Machine must be free of any legal  
obligations or restrictions that prevent its exchange; and  
3. be responsible for loss of, or damage to, a Machine in transit when you are responsible for  
the transportation charges.  
Extent of Warranty  
IBM does not warrant uninterrupted or error-free operation of a Machine.  
Misuse, accident, modification, unsuitable physical or operating environment, improper  
maintenance by you, or failure caused by a product for which IBM is not responsible may void the  
warranties.  
THESE WARRANTIES REPLACE ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE. HOWEVER, SOME LAWS DO NOT ALLOW  
THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL  
EXPRESS AND IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY  
PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD.  
In Canada, warranties include both warranties and conditions.  
Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above  
limitation may not apply to you.  
V
Download from Www.Somanuals.com. All Manuals Search And Download.  
compl.fm Page VI Friday, April 3, 1998 6:29 PM  
For European warranty terms and conditions refer to enclosed IBM warranty  
statement Part Number 72H9623.  
Référez-vous à la garantie IBM N°de référence 72H9623 pour les conditions  
de garantie européennes.  
Die europäischen Garantiebedingungen finden Sie in der beigefügten IBM-  
Gewährleistungserklärung, Teilenummer 72H9623.  
Los términos y condiciones de las garantías en Europa se recogen en la  
declaración de garantía adjunta del número de pieza IBM 72H9623.  
Per le condizioni e i termini di garanzia relativi ai paesi europei, consultare  
l'apposita dichiarazione IBM (numero di matricola 72H9623).  
VI  
Download from Www.Somanuals.com. All Manuals Search And Download.  

GPX TV DVD Combo 1630 0629 10 User Manual
Graco Car Seat PD141229A User Manual
Graco Toddler Furniture 8824 User Manual
Graham Field Camping Equipment 765000 User Manual
Hamilton Beach Waffle Iron 26030 User Manual
Hasbro Motorized Toy Car 03102 User Manual
Honeywell Automobile Parts ML6284 User Manual
Honeywell DVR HRDP DVR User Manual
Honeywell Home Theater Server T755U User Manual
Hotpoint Range RGB744GER User Manual