IBM Computer Monitor 6518 4LE User Manual

6518 - 4LE  
E50 Color Monitor  
User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Precautions.......................................................................................A2  
Workplace Preparation .................................................................A2  
Working Practices.........................................................................A2  
Monitor Driver Installation............................................................A4  
Driver installation for Windows 95 or Windows 98 ......................A4  
Driver installation for Windows 2000 or Windows Me .................A5  
Driver installation for Windows XP ...............................................A6  
Control Panel Function...................................................................A7  
Front Panel Controls......................................................................A7  
On Screen Display (OSD) Control Adjustment........................A8  
On Screen Display (OSD) Selection and Adjustment...............A9  
Troubleshooting.....................................................................A13  
Specifications.........................................................................A15  
Specifications..............................................................................A15  
Preset Modes (Resolution) ...........................................................A16  
Service Information.....................................................................A16  
A1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Workplace Preparation  
Positioning the Monitor  
Choose a suitable place to position the monitor where it is not near  
fluorescent desk lighting or any equipment that produces magnetic fields  
that could cause interference. Ensure that the furniture or equipment can  
support the weight of the monitor. Allow at least 50mm (2 in.) ventilation  
space around the monitor.  
Height  
Position the monitor so that the top of the screen is slightly below your  
eye level when you sit at your workstation.  
Orientation  
- Choose a position that gives the least reflection from lights and  
windows, usually at a right angle to any windows.  
- Position the monitor directly in front of you so that you do not have to  
twist your body.  
- Tilt the monitor to a comfortable viewing angle.  
Working Practices  
Rest  
Take regular breaks. Vary your posture, and stand up and stretch  
occasionally as prolonged use of computer workstations can be tiring.  
Back  
Sit back in the chair and use the back rest.  
Hands  
Use a light touch on the keyboard, keeping your hands and fingers  
relaxed. Allow a space in front of the keyboard to rest your wrists when  
not typing. Consider using a wristpad.  
Eyesight  
Working with monitors, in common with any prolonged close work, can  
be visually demanding. Look away from the screen periodically and have  
your eyesight checked regularly.  
A2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Screen settings  
Set the screen brightness and contrast to a comfortable level. You may  
have to adjust this as the lighting changes during the day. Many  
application programs let you select color combinations which can help  
you to view in comfort.  
Power Cord  
For safe operation, use the power cord supplied with the unit.  
Notes  
Do not install the monitor in a location near heat sources such as  
radiators or air ducts, or in a place subject to direct sunlight, or  
excessive dust or mechanical vibration or shock.  
Save the original shipping carton and packing materials, as they will  
come in handy if you ever have to ship your monitor.  
To keep the monitor looking new, periodically clean it with a soft cloth.  
Stubborn stains may be removed with a cloth lightly dampened with a  
mild detergent solution. Never use strong solvents such as thinner,  
benzene, or abrasive cleaners, since these will damage the cabinet. As  
a safety precaution, always unplug the monitor before cleaning it.  
A3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor Driver Installation  
Driver installation for Windows 95 or Windows 98  
To use the Plug and Play feature in Microsoft®Windows®95 or  
Windows 98, files should be loaded from the IBM Monitor CD.  
1. Turn off the computer and all attached devices.  
2. Ensure that the monitor is connected correctly.  
3. Turn on the monitor and then the system unit. Allow the system to  
boot into Windows 95 or Windows 98.  
Your computers Plug and Play code may warn you that your system  
hardware has changed. This means that it has detected your new  
monitor for the first time.  
4. Open the DISPLAY PROPERTIES window by clicking START, SETTINGS,  
CONTROL PANEL and then double - clicking on the DISPLAY icon.  
5. Click the SETTINGS tab.  
• In case of Windows 95 :  
6 - 1.Click the CHANGE DISPLAY TYPE button.  
2.Click the CHANGE MONITOR TYPE button.  
• In case of Windows 98 :  
6 - 1.Click the ADVANCED button.  
2.Click the MONITOR tab.  
3.Open the UPGRADE DEVICE DRIVER WIZARD window by clicking on  
CHANGE button and then select the NEXT button.  
4.Click the “Display a list of the known drivers for this device so that  
I can choose a specific driver” and then select the NEXT button.  
7. Insert the IBM Monitor CD into the CD drive: and click the HAVE DISK  
button.  
8. Click OK.  
9. Ensure that the CD drive letter is selected.  
10.Choose IBM E50 monitor and Click OK. The files will be copied from  
the CD to your hard disk drive.  
11. Close all open windows and remove the CD.  
12.Restart the system.  
The system will automatically select the maximum refresh rate and  
corresponding Color Matching Profiles.  
A4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor Driver Installation  
Driver installation for Windows 2000 or Windows Me  
To use the Plug and Play feature in Microsoft Windows 2000 or  
Microsoft Windows Millennium Edition(Me) files should be loaded  
from the IBM Monitor CD.  
1. Turn off the computer and all attached devices.  
2. Ensure that the monitor is connected correctly.  
3. Turn on the monitor and then the system unit. Allow the system to  
boot into Windows 2000 or Windows Me.  
4. Open the DISPLAY PROPERTIES window by clicking START, SETTINGS,  
CONTROL PANEL and then double - clicking on the DISPLAY icon.  
5. Click the SETTINGS tab.  
6. Click the ADVANCED button.  
7. Click the MONITOR tab.  
8. Click the PROPERTIES button.  
9. Click the DRIVER tab.  
10.Open the UPGRADE DEVICE DRIVER WIZARD window by clicking on UPDATE  
DRIVER and then Click the NEXT button.  
11. Select the “Display a list of the known drivers for this device so that I  
can choose a specific driver” and then Click the NEXT button.  
12.Insert the IBM Monitor CD into the CD drive: and click the HAVE DISK  
button.  
13.Click OK.  
14.Ensure that the CD drive letter is selected.  
15.Choose IBM E50 monitor and Click OK. The files will be copied from  
the CD to your hard disk drive.  
16.Close all open windows and remove the CD.  
17.Restart the system.  
The system will automatically select the maximum refresh rate and  
corresponding Color Matching Profiles.  
A5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor Driver Installation  
Driver installation for Windows XP  
To use the Plug and Play feature in Microsoft Windows XP files should  
be loaded from the IBM Monitor CD.  
1. Turn off the computer and all attached devices.  
2. Ensure that the monitor is connected correctly.  
3. Turn on the monitor and then the system unit. Allow the system to  
boot into Windows XP.  
4. Open the DISPLAY PROPERTIES window by clicking START, SETTINGS,  
CONTROL PANEL and then double - clicking on the DISPLAY icon.  
5. Click the SETTINGS tab.  
6. Click the ADVANCED button.  
7. Click the MONITOR tab.  
8. Click the PROPERTIES button.  
9. Click the DRIVER tab.  
10.Open the HARDWARE UPDATE WIZARD window by clicking on UPDATE  
DRIVER and then Click the NEXT button.  
11. Select the “Install from a list or Specific location(Advanced)and then  
Click the NEXT button.  
12.Insert the IBM Monitor CD into the CD drive: and click the HAVE DISK  
button.  
13.Click OK.  
14.Ensure that the CD drive letter is selected.  
15.Choose IBM E50 monitor and Click OK. The files will be copied from  
the CD to your hard disk drive.  
16.Close all open windows and remove the CD.  
17.Restart the system.  
The system will automatically select the maximum refresh rate and  
corresponding Color Matching Profiles.  
A6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Panel Functions  
Front Panel Controls  
MENU  
SELECT  
Control  
Function  
Power Button  
Use this button to turn the monitor on or off.  
This Indicator lights up green when the monitor  
operates normally. If the monitor is in power saving  
mode, this indicator color changes to amber.  
Power Indicator  
Use this button to enter or exit the on screen  
display.  
MENU Button  
Buttons  
Use these buttons to choose or adjust items in  
the on screen display.  
Use this button to enter a selection in the on  
screen display.  
SELECT Button  
A7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On Screen Display (OSD) Control Adjustment  
Screen Adjustment  
NOTE  
Allow the monitor to stabilize for at least 30 minutes before making image adjustments.  
To make adjustments in the On Screen Display, follow these steps:  
Press the MENU Button, then the main menu of the OSD appears.  
To access a control, use the  
or  
Buttons. When the icon you want  
becomes highlighted, press the SELECT Button.  
Use the  
Buttons to adjust the item to the desired level.  
Accept the changes by pressing the SELECT Button.  
Exit the OSD by pressing the MENU Button.  
A8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On Screen Display(OSD) Selection and Adjustment  
The following table indicates all the On Screen Display control, adjustment,  
and setting menus.  
Icon  
Main menu  
Contrast  
Icon  
Main menu  
H Moire  
V Moire  
Brightness  
H Position  
H Size  
COLOR 9300  
6500  
K
V Position  
V Size  
R G B  
Pincushion  
Pin Balance  
Parallelogram  
Trapezoid  
Top Corner  
Bottom Corner  
Recall  
Reset  
Language  
OSD Time  
U Video Level  
Degauss  
Information  
: Adjustable  
A9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On Screen Display(OSD) Selection and Adjustment  
You were introduced to the procedure of selecting and adjusting an item  
using the OSD system. Listed below are the icons, icon names, and icon  
descriptions of the all items shown on the Menu.  
Icon  
Sub menu  
Description  
To adjust the contrast of the screen.  
CONTRAST  
BRIGHTNESS  
H POSITION  
To adjust the brightness of the screen.  
To move image left and right.  
To adjust image width.  
H SIZE  
V POSITION  
V SIZE  
To move image up and down.  
To adjust image height.  
To correct a concave or convex bowing of the  
image.  
PINCUSHION  
PIN BALANCE  
To correct the balance of both sides bowing.  
To correctly adjust the skew of the image.  
PARALLELOGRAM  
TRAPEZOID  
To correct geometric distortion.  
To correct an irregular distortion of the displayed  
image.  
TOP CORNER  
A10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On Screen Display(OSD) Selection and Adjustment  
Icon  
Sub menu  
Description  
To correct an irregular distortion of the displayed  
image.  
BOTTOM CORNER  
This item allows you to reduce the degree of moire.  
(Moire is caused by interference Horizontal Scan  
Line with the periodical dot screen). It is normally  
OFF(H:0/V:0).  
The moire adjustments may affect the focus of the  
screen.  
H MOIRE  
V MOIRE  
Moire adjustments may shake slightly while the  
moire reduction function is on.  
9300  
6500  
Slightly bluish white.  
Slightly reddish white.  
COLOR  
Select the screen temperature which you prefer  
among reddish or bluish or any color in between.  
K
Set your own color levels.  
R G B  
You can use this function to reload the modified parameters  
for screen display operation, as specified by the user after  
purchase: Position, Size, Side Pincushion, Side Pincushion  
Balance, Parallelogram, Trapezoid, Top Corner, Bottom  
Corner (These recalled options may differ depending on the  
mode selected: Preset, User, or New).  
OK  
CANCEL  
RECALL  
If you don’t want to recall the monitor to these  
modified settings, use the  
button to select  
CANCEL and then press the SELECT button.  
A11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On Screen Display(OSD) Selection and Adjustment  
Icon  
Sub menu  
Description  
OK  
CANCEL  
Return to all factory default settings except "LANGUAGE":  
Brightness, Contrast, Color 9300, Video Level, OSD Time,  
Moire (These reset options may differ depending on the  
mode selected: Preset, User, or New).  
RESET  
If you don’t want to reset the monitor, use the  
button to select CANCEL and then press  
the SELECT button.  
To choose the language in which the control names  
are displayed.  
OSD Menus are available in 12 languages: English,  
German, French, Spanish, Italian, Swedish,  
Finnish, Portuguese, Korean, Chinese, Russian  
and Polish.  
LANGUAGE  
5  
10  
20  
30  
60  
Set the OSD time, i.e. the length of time a menu  
will remain on-screen before it shuts off  
automatically. Adjust the time to 5, 10, 20, 30 or 60  
seconds.  
OSD TIME  
0.7V  
1.0V  
This item is used to select the monitor's input signal  
level. The normal level used for most PCs is 0.7V.  
If the screen becomes suddenly washed-out or  
blurred, please select 1.0V and try again.  
VIDEO LEVEL  
U
To manually demagnetize the screen to avoid  
showing incorrect images or colors.  
DEGAUSS  
PRESETMODE  
USERMODE  
To inform users of preset and user mode data.  
INFORMATION  
A12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
No image appears  
Is the power cord of the  
monitor connected?  
Check and see if the power cord is connected properly to  
the power outlet.  
Is the power indicator light  
on?  
Press the Power button.  
Is the power on and the  
power indicator green?  
Adjust the brightness and the contrast.  
Is the power indicator  
amber?  
If the monitor is in power saving mode, try moving the  
mouse or pressing any key on the keyboard to bring up  
the screen.  
Do you see an "OUT OF  
FREQUENCY" message  
on the screen?  
This message appears when the signal from the PC  
(video card) is out of horizontal or vertical frequency  
range of the monitor. See the 'Specifications' section of  
this manual and configure your monitor again.  
Do you see a "SELF  
DIAGNOSITICS" message  
on the screen?  
This message appears when the signal cable between  
your PC and your monitor is not connected. Check the  
signal cable and try again.  
The screen is flickering.  
Is the vertical frequency  
less than 70Hz or is your  
monitor set to the  
Set the vertical frequency to 72Hz or higher, and  
consult the video card user manual for instructions on  
converting to a non-interlaced mode.  
(You can set this option under the Display icon of the  
Control Panel.)  
interlaced mode?  
Do you have any  
magnetic material such  
as adapter, or high-  
voltage line near to your  
monitor?  
Remove magnetic sources, such as power  
adapters, speakers, or high-voltage lines, away from  
the monitor.  
Do you hear a "~ding"  
sound while the monitor  
is flickering?  
Use the normal degaussing function. This function  
clears the screen and reduces any screen blur that  
may occur due to the surrounding magnetic field. The  
screen may flicker for about 5 seconds, accompanied  
by a "~ding" sound.  
A13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
The screen color is not normal.  
Do you see basic  
discoloration (16 colors)?  
Set the color depth to 256 colors or higher: use 'Control  
Panel' 'Display' 'Settings' 'Color Palette'  
Is the screen color unstable  
or monochrome?  
Check the connection of the signal cable.  
Do you see a partial  
blurring on the screen?  
This happens due to interference from surrounding  
magnetic fields, as created when speakers, steel  
structures, or high-voltage lines are placed near the  
monitor. Remove any such materials from the  
immediate vicinity and use the DEGAUSS icon on the  
screen adjustment menu to fix the screen.  
I see an after-image on the screen.  
Do you see the after-image  
even when you turn off  
the monitor?  
A premature aging of the monitor pixels may cause the  
prolonged display of a single image on the screen. Be  
sure to use a screen saver to maximize the service life of  
the monitor.  
I see waves on the screen.  
Do you see the wave  
directly on the screen?  
This occurs in inverse proportion to the screen focus,  
which can be caused by a particular frequency or video  
card. Brighten the screen and use the 'MOIRE' icon on  
the screen adjustment menu to adjust the screen.  
Have you installed the monitor driver?  
Have you installed the  
monitor driver?  
Be sure to install the monitor driver from the IBM Monitor  
CD that comes with your monitor.  
A14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Picture Tube  
15 inches (13.7 inches viewable)  
90 degree deflection  
0.28mm diagonal, 0.25mm horizontal dot pitch  
AGAS(Anti-Glare Anti-Static) coating  
Sync Input  
Horizontal Freq. 30 - 54kHz (Automatic)  
Vertical Freq.  
Input Form  
Signal Input  
50 - 120Hz (Automatic)  
Separate TTL, Positive/Negative  
15 pin D-Sub Connector  
Video Input  
Plug & Play  
Input Form  
Resolution(max) 1024 x 768@60Hz  
Separate, RGB Analog, 0.7Vp-p/75 ohm, Positive  
DDC 2B  
75 W  
15 W  
5 W  
5 W  
Normal  
Standby/Suspend  
Active Off  
Power Off  
Power  
Consumption  
Width  
Height  
Depth  
35.6 cm / 14.0 inches  
37.1 cm / 14.6 inches  
39.5 cm / 15.6 inches  
Dimensions  
&Weight  
(with tilt/ swivel  
stand)  
Net  
11.5 kg (25.4 lbs)  
Power Input  
AC 100-240V 50/60Hz 1.5A  
Environmental  
Conditions  
Operating Conditions  
Temperature  
Humidity  
0˚C to 40 ˚C  
10 % to 80 % non-Condensing  
Storage Conditions  
Temperature  
Humidity  
-20˚C to 60 ˚C  
5 % to 95 % non-Condensing  
Tilt/Swivel Stand  
Signal cable  
Power cord  
Detached  
Attached  
Detached  
MPR-II  
Regulations  
A15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Preset Modes (Resolution)  
Display Modes (Resolution)  
Horizontal Freq. (kHz)  
Vertical Freq. (Hz)  
1
31.47  
37.50  
43.27  
31.47  
46.88  
53.68  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
640 x 480  
640 x 480  
640 x 480  
720 x 400  
800 x 600  
800 x 600  
60  
75  
85  
70  
75  
85  
2
3
4
5
6
Service Information  
The following parts are for use by IBM services, or IBM authorized  
dealers, to support customer warranty. Parts are for service use only.  
DESCRIPTION  
MODEL  
COLOR  
MACHINE  
TYPE  
PART  
NUMBER  
73P2089 E50 FRU MONITOR  
73P2086 E50 FRU - Tilt/Swivel  
6518  
4LE  
Stealth Black  
Stealth Black  
A16  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Harbor Freight Tools Metal Detector 97245 User Manual
Harman Kardon Home Theater System AB 2 User Manual
Hasbro Games 05545 User Manual
Heat Glo LifeStyle Indoor Fireplace 7000XLT User Manual
HP Hewlett Packard Landscape Lighting 8308A User Manual
HP Hewlett Packard Personal Computer 774uk User Manual
HP Hewlett Packard Scanner L2683B201 User Manual
Humminbird Fish Finder 531444 1_A User Manual
Husqvarna Trimmer PN 249512 User Manual
ICP DAS USA Camcorder IM 100 User Manual