Husqvarna Trimmer 123L User Manual

Operator's Manual J-handle set, 123L  
p. 2-7  
EN  
Read through the Operator‘s Manual carefully and understand the content before using the machine.  
These instructions supplement the instructions that were included with the machine. For other procedures,  
please refer to the operating instructions for the machine.  
Manuel d'utilisation Kit de poignée en J, 123L  
FR  
ES  
p. 8-13  
Lire attentivement et bien assimiler le manuel d’utilisation avant de se servir de la machine.  
Ces instructions sont un complément au manuel qui accompagne la machine. Pour les autres instructions, se  
reporter au manuel d’utilisation de la machine.  
Manual de instrucciones Juego de mangos J, 123L  
p. 14-19  
Antes de utilizar la máquina, lea bien el manual de instrucciones hasta comprender su contenido.  
Estas instrucciones son complemento del manual que se adjunta a la máquina. Para más información sobre el  
manejo, consultar el manual de la máquina.  
114 02 65-99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
SAFETY INSTRUCTIONS  
Cutting equipment  
IMPORTANT INFORMATION  
The section describes how through correct  
maintenance and through using the right type of  
cutting equipment you can reduce the machine‘s  
tendency to kickback, obtain maximum clearing  
capacity and increase the service life of the cutting  
equipment.  
This section describes how through correct maintenance and  
through using the right type of cutting equipment you can:  
• Reduce the machine‘s tendency to kickback  
• Obtain maximum cutting capacity.  
• Increase the service life of the cutting equipment.  
The three basic rules:  
Only use the cutting and guard equipment we  
recommend! See chapter “Technical data“.  
1)Only use the cutting  
and guard equipment  
we recommend! See  
chapter “Technical  
data“.  
Refer to the instructions for the cutting equipment  
for the correct winding of cord and for the  
selection of the right cord diameter.  
Keep the blade’s teeth well and correctly  
sharpened! Follow our recommendations. Also  
refer to the instructions on the blade packaging.  
2)Keep the blade‘s teeth  
well and correctly  
WARNING!  
Incorrect cutting equipment or an  
sharpened! Follow our  
instructions and use the  
recommended filing  
gauge. An incorrectly  
sharpened or damaged  
blade increases the risk  
of an accident.  
!
incorrectly sharpened blade increases  
the risk of kickback.  
Filing the grass  
blade  
• See the cutting  
equipment’s packaging for  
correct filing instructions.  
3)Check the cutting  
equipment with regard  
to damage and crack  
formation. Damaged  
cutting equipment  
should always be  
replaced.  
• The blades are sharpened  
using a single cut flat file.  
• Sharpen all edges equally  
to maintain the balance of  
the blade.  
English – 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
SAFETY INSTRUCTIONS  
Brush cutting using a grass blade  
Basic clearing techniques  
• Always carry out clearing and trimming at full throttle.  
• A blade is used for all  
types of high or thick  
grass.  
• Always drop to idling speed after each working operation.  
Longer periods running at full throttle without loading the  
engine (that is without resistance, which the engine feels  
from the cutting equipment when trimming) can lead to  
serious engine damage.  
• The grass is cut down  
with a sideways, swinging  
movement, where the  
movement from right-to-  
left is the clearing stroke  
and the movement from  
left-to-right is the return  
stroke. Let the blade work  
on the left-hand side  
(between 8 and 12  
Designations  
• Brush cutting is a general  
term for clearing grass.  
Grass blades are used for  
this purpose.  
o’clock).  
• If the blade is angled to  
the left when clearing the  
grass will collect in a line,  
which makes collection  
easier, e.g. when raking.  
• Grass trimming is a  
general term for light  
clearing, e.g. around  
edges or around trees. A  
trimmer head or plastic  
blade is used.  
• Try to work rhythmically. Stand firmly with your feet apart.  
Move forward after the return stroke and stand firmly again.  
• Let the support cup rest lightly against the ground. It is used  
to protect the blade from hitting the ground.  
WARNING!  
Sometimes grass can collect in the spray  
!
guard and cutting head. Always stop the  
engine when cleaning.  
• Reduce the risk of material wrapping around the blade by  
following these instructions:  
a) Always work at full throttle.  
b) Avoid the previously cut material during the return  
stroke.  
• Stop the engine, loosen the harness and place the machine  
on the ground before you start to collect the cut material.  
WARNING!  
Neither the user of the tool or anyone else  
may attempt to remove the cut material  
while the engine is running or with the  
blade rotating as this can result in serious  
injury.  
Stop the engine and blade before you  
remove material that has wound around  
the blade as otherwise there is a risk of  
injury.  
!
WARNING!  
Warning for thrown objects. Always wear  
protective glasses. Never lean over the  
guard. Stones, rubbish, etc. can be  
thrown up into the eyes causing  
blindness or serious injury.  
Keep unauthorised persons at a distance.  
Children, animals, onlookers and helpers  
should be kept outside the safety zone of  
15 m. Stop the machine immediately if  
anyone approaches.  
!
4 – English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
ASSEMBLY  
Assembling the J-handle  
Assembly of the blade and trimmer  
head  
WARNING  
Only grass blades or trimmer heads/  
It is extremely important  
that the disc drive’s/support  
flange’s guide engages  
correctly in the cutting  
equipment’s centre hole  
when assembling the cutting  
equipment. Cutting  
equipment assembled  
incorrectly can result in  
serious and/or fatal personal  
injury.  
!
plastic blades may be used when the J-  
handle is fitted. Clearing blades must  
never be used with the J-handle.  
• Clip the loop handle onto  
the shaft. Note that the  
loop handle must be fitted  
between the arrows on the  
shaft.  
• Slide the spacer into the  
slot in the loop handle.  
WARNING!  
Under no circumstances may the cutting  
equipment be used without an approved  
guard fitted. See the chapter “Technical  
data”. If the wrong guard or a defective  
guard is fitted this can cause serious  
personal injury.  
!
• Fit the nut, bolt and knob.  
Do not overtighten.  
• Attach the J-handle to the  
loop handle using the  
three screws, as shown.  
Do not attach any blade to the unit  
without proper installation of all required  
parts. Failure to use the proper parts can  
cause the blade to fly off and seriously  
injure the operator and/or bystanders.  
• Now adjust the trimmer to  
give a comfortable  
working position. Tighten  
the bolt/knob.  
Fitting the combination guard, grass  
blade and grass knife  
• Hook the guard (A) onto  
the bracket on the shaft  
and secure with 1 bolt.  
NOTE! Use the  
recommended blade guard.  
G
F
See Technical data“.  
Fitting the suspension ring  
• Fit the drive disc (B) on  
E
the output axle.  
• Turn the blade axle until  
one of the holes in the  
drive disc aligns with the  
hole in the gear housing.  
Fit the suspension ring  
between the rear handle and  
the loop handle. Position the  
suspension ring so that the  
machine is balanced and  
comfortable to work with.  
D
• Insert the locking pin (C)  
in the hole so that the axle  
A
B
is locked.  
C
• Place the blade (D),  
support cup (E) and  
support flange (F) on the  
output axle.  
• Fit the nut (G). The  
tightening torque of the  
nut is 35-50 Nm (3,5 - 5  
kpm). Use the socket  
spanner in the tool kit.  
Hold the handle of the  
spanner as close to the  
blade guard as possible.  
The nut is tightened when  
the spanner is turned  
against the direction of  
rotation (left-hand thread).  
English – 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
START AND STOP  
Control before starting  
For reasons of safety follow  
these recommendations!  
• Check the blade to ensure  
that no cracks have formed  
at the bottom of the teeth  
or by the centre hole. The  
most common reason why  
cracks are formed is that  
sharp corners have been  
formed at the bottom of  
the teeth while sharpening  
or that the blade has been  
used with dull teeth.  
Discard a blade if cracks  
are found.  
• Check that the support  
flange is not cracked due  
to fatigue or due to being  
tightened too much.  
Discard the support flange  
if it is cracked.  
• Ensure the locking nut has  
not lost its captive force.  
The nut lock should have  
a locking force of at least  
1.5 Nm. The tightening  
torque of the locking nut  
should be 35-50 Nm.  
• Check that the guard is  
not damaged or cracked.  
Replace the guard if it is  
exposed to impact or is  
cracked.  
• Check that the trimmer  
head and spray guard are  
not damaged or cracked.  
Replace the trimmer head  
or spray guard if they are  
exposed to impact or are  
cracked.  
• Never use the machine  
without a guard or spray  
guard nor with a defective  
guard.  
6 – English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
TECHNICAL DATA  
Approved accessories J-handle  
Centre hole in blades Ø 25,4 mm (1")  
Threaded blade axle M10  
Type  
Cutting attachment guard Art No.  
Grass 255-4 1" (Ø 255 4-teeth)  
Tricut Ø 300  
503 93 42-02  
503 93 42-02  
Grass blade  
Plastic knives  
Trimmer head  
S35  
T35  
Superauto II 1"  
Trimmy Fix  
503 93 42-02  
503 93 42-02  
503 93 42-02  
503 93 42-02  
Support cup  
Fixed  
-
English – 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
114 02 65-99  
´®z+H:[¶9'¨  
Download from Www.Somanuals.com. All Manuals Search And D2ow0n0lo4adW. 11  

Gravely Lawn Mower 991079 User Manual
Grizzly Saw G1023RL User Manual
Grizzly Saw G8994 User Manual
Harbor Freight Tools Impact Driver 95310 User Manual
Honeywell Thermostat CT1950 User Manual
Hotpoint Freezer RLA80 User Manual
Hotpoint Stove 50cm Free Standing Gas Cooker User Manual
HP Hewlett Packard Printer 16V User Manual
Hubbell Switch LX3000 User Manual
Icom Portable Radio IC M32 User Manual