Humminbird TV Mount 531483 1_D User Manual

4
1
531483-1_D  
531483-1_D  
300 Series™ In-Dash Mounting Kit  
300 Series™ In-Dash Mounting Kit  
Returning Your Unit for Service  
Contact Humminbird®  
Thank You  
Before sending your unit in for repair, please contact the factory, either by  
phone or by email, to obtain a Repair Authorization Number for your unit.  
Contact the Humminbird® Customer Resource Center  
Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation  
by designing and manufacturing top-quality, thoroughly reliable marine equipment. Genuine Humminbird®  
accessories offer the opportunity to upgrade and expand the capabilities of your Humminbird® product.  
in any of the following ways:  
NOTE: Please do not return your Humminbird® to the store for service.  
By Telephone  
Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely  
event that your Humminbird® does require repairs, we offer an exclusive Service Policy - free of charge  
during the first year after purchase, and available at a reasonable rate after the one-year period. For  
complete details, see the Warranty section included in this manual.  
(Monday - Friday 8:00 a.m. to 4:30 p.m. Central Standard Time):  
Please have your product model name and serial number available  
before calling the factory. If you contact the factory by e-mail, please  
include your product model name and serial number in the e-mail, and  
use Request for Repair Authorization Number for your e-mail subject  
header. You should include your Repair Authorization Number in all  
subsequent communications about your unit.  
1-800-633-1468  
By e-mail  
Contact our Customer Resource Center at 1-800-633-1468 or visit our web site at www.humminbird.com.  
(typically we respond to your e-mail within three business days):  
For IN-WARRANTY service, complete the following steps:  
Installation Overview  
• Obtain a Repair Authorization Number from the Humminbird®  
Customer Resource Center.  
Following are instructions for the recessed installation of the 300 SeriesTM control head into a hole in the  
dash. Before you start installing the 300 SeriesTM control head, we encourage you to read these instructions  
carefully in order to get the full benefit from your Humminbird® accessory.  
For direct shipping, our address is:  
Humminbird  
• Tag product with your name, street address, phone number and  
your assigned Repair Authorization Number.  
Service Department  
678 Humminbird Lane  
Eufaula, AL 36027 USA  
If you find that any items are missing from your installation kit, call our Customer Resource Center at  
1-800-633-1468 or visit our web site at www.humminbird.com.  
• Include a brief written description of the problem.  
In addition to the hardware supplied with your In-Dash Mounting Kit, you will need a reciprocating saw for  
cutting the dash material and masking tape to hold the mounting template in place.  
• Include a copy of your receipt (to show proof and date of  
purchase).  
• Return product freight prepaid to Humminbird®, using an insured  
carrier with delivery confirmation.  
In-Dash Mounting  
To in-dash mount the 300 Series™ control head, start by placing the components on the surfaces where you  
intend to install them before installation. Make sure that the surfaces you have chosen provide adequate  
protection from wave shock, and that all cables can reach the control head.  
For OUT-OF-WARRANTY service, complete the following steps:  
NOTE: If a cable is too short for your application, extension cables are available. Call Humminbird®  
Customer Support at 1-800-633-1468 for more information.  
• Obtain a Repair Authorization Number from the Humminbird®  
Customer Resource Center.  
1. Locate a suitable, flat area of the dash to mount the control head. The control head requires a depth of  
at least 3 inches (76 mm).  
• Include payment in the form of credit card number and expiration  
date, money order or personal check. Please do not send cash.  
2. Tape the paper In-Dash Mounting template to the desired in-dash mounting location.  
• Tag product with your name, street address, phone number and  
your assigned Repair Authorization Number.  
3. At a location inside the dotted line on the template, drill a hole large enough to insert the blade of the  
reciprocating saw. Carefully begin cutting toward the dotted line, then follow the dotted line around the  
template. Remove the template when finished.  
• Include a brief written description of the problem.  
• Return product freight prepaid to Humminbird®, using an insured  
carrier with delivery confirmation.  
© 2009 Humminbird®, Eufaula AL, USA.  
All rights reserved.  
© 2009 Humminbird®, Eufaula AL, USA.  
All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Greenheck Fan Ventilation Hood SMDR 501 User Manual
Grizzly Lathe G0657 G0658 User Manual
Grundig CRT Television MFS 55 4601 8 User Manual
GVision Computer Monitor L15AX Series User Manual
Hamilton Beach Can Opener Smooth Edge User Manual
Hanvon Laptop 0504 User Manual
Harbor Freight Tools Mobility Aid 92987 User Manual
Honeywell Portable Generator 6036 User Manual
Hotpoint Dishwasher FDYB 10011 User Manual
Hotpoint Refrigerator 6970 User Manual