531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:40 AM Page 1
747c and 777c2
Operations Manual
531526-1_A
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:40 AM Page 3
Table of Contents
How Sonar Works
1
DualBeam PLUS™ Sonar .......................................................................................................... 3
QuadraBeam PLUS™ Sonar (with optional-purchase QuadraBeam PLUS™ transducer) ........ 4
WideSide® Sonar (with optional-purchase WideSide® transducer) .......................................... 5
Universal Sonar 2 ...................................................................................................................... 6
What’s On the Display
7
Views
9
Sonar View .............................................................................................................................. 10
Understanding Sonar History.................................................................................................. 11
Real Time Sonar (RTS®) Window ............................................................................................ 12
Freeze Frame and Cursor ........................................................................................................ 12
Bottom Presentation................................................................................................................ 13
Sonar Zoom View .................................................................................................................... 15
200/83 kHz Split Sonar View .................................................................................................. 16
Big Digits View ........................................................................................................................ 17
Circular Flasher View .............................................................................................................. 18
Side Beam View (with optional-purchase QuadraBeam PLUS™ transducer).......................... 19
WideSide® View (with optional-purchase WideSide® transducer) .......................................... 22
Key Functions
23
POWER/LIGHT Key .................................................................................................................. 23
VIEW Key ................................................................................................................................ 23
MENU Key .............................................................................................................................. 24
4-WAY Cursor Control Key ...................................................................................................... 24
EXIT Key .................................................................................................................................. 25
Accessory Bus
26
27
28
30
Powering Up the Unit
The Menu System
Start-Up Options Menu
Normal Operation .................................................................................................................... 30
Simulator ................................................................................................................................ 31
System Status ........................................................................................................................ 32
Self Test .................................................................................................................................... 32
Accessory Test ........................................................................................................................ 33
PC Connect (with PC Connect Cable Only) .............................................................................. 33
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:40 AM Page 4
Table of Contents
Sonar X-Press™ Menu
34
Side (WideSide® transducer: WideSide® view only .............................................................. 35
Sensitivity ................................................................................................................................ 36
Upper Range (Advanced: Sonar, Split Sonar, Big Digits and Circular Flasher Views only) ......37
Lower Range ............................................................................................................................ 38
Side Beam Range (WideSide® transducer: WideSide® view only) .......................................... 39
Chart Speed.............................................................................................................................. 40
Quad Layout (with optional-purchase QuadraBeam PLUS™ transducer,
Side Beam View only).............................................................................................................. 40
Zoom Level (Sonar Zoom view only) ........................................................................................ 41
Bottom Lock ............................................................................................................................ 41
Bottom Range (Sonar Zoom View only, when Bottom Lock is On).......................................... 42
Sonar Menu Tab
43
Beam Select ............................................................................................................................ 44
Fish ID+™ ................................................................................................................................ 45
Fish ID Sensitivity .................................................................................................................... 46
Real Time Sonar (RTS®) Window ............................................................................................ 46
Bottom View ............................................................................................................................ 47
Zoom Width.............................................................................................................................. 47
83 kHz Sensitivity (Advanced).................................................................................................. 48
455 kHz Sensitivity (Advanced, with QuadraBeam PLUS™ transducer) ................................ 49
WideSide® Sensitivity (Advanced, with WideSide® transducer).............................................. 50
Depth Lines (Advanced) .......................................................................................................... 51
Surface Clutter (Advanced) ...................................................................................................... 52
Noise Filter (Advanced) ............................................................................................................ 53
Max Depth (Advanced) ............................................................................................................ 53
Water Type (Advanced) ............................................................................................................ 54
Transducer Select .................................................................................................................... 54
Alarms Menu Tab
55
Depth Alarm ............................................................................................................................ 56
Fish ID Alarm............................................................................................................................ 56
Low Battery Alarm .................................................................................................................. 57
Aux. Temp. Alarm (with optional-purchase temp. probe or Temp/Speed only) ...................... 57
Temp Alarm .............................................................................................................................. 58
Alarm Tone .............................................................................................................................. 58
Setup Menu Tab
59
Units - Depth............................................................................................................................ 60
Units - Temp (International only).............................................................................................. 60
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:40 AM Page 5
Table of Contents
Units - Distance (with Temp/Speed or GPS receiver) .............................................................. 60
Units - Speed (with Temp/Speed or GPS receiver) .................................................................. 61
User Mode................................................................................................................................ 61
Language (International only) .................................................................................................. 61
Triplog Reset (with Temp/Speed or GPS receiver) .................................................................. 62
Restore Defaults ...................................................................................................................... 62
Select Readouts (Advanced, Sonar view only) ........................................................................ 63
Depth Offset (Advanced).......................................................................................................... 65
Aux. Temp. Offset (Advanced; with optional-purchase temp. probe or Temp/Speed only) ........ 65
Temp Offset (Advanced) .......................................................................................................... 66
Speed Calibration (Advanced, with Temp/Speed only) .......................................................... 66
Digits Format (Advanced) ........................................................................................................ 67
NMEA Output (Advanced)........................................................................................................ 68
Views Menu Tab
69
70
71
Accessories Menu Tab
Troubleshooting
700 Series™ Doesn’t Power Up.............................................................................................. 71
700 Series™ Defaults to Simulator with a Transducer Attached ........................................ 71
Display Problems...................................................................................................................... 72
Finding the Cause of Noise .................................................................................................... 73
700 Series™ Fishing System Accessories
74
77
79
91
Specifications
Glossary
Contact Humminbird®
NOTE: Entries in this Table of Contents which list (International only) are only available on
products sold outside of the US by our authorized International Distributors. To obtain a list
of authorized International Distributors, please visit our website at www.humminbird.com
or contact our Customer Resource Center at 1-800-633-1468 to locate the distributor
nearest you.
NOTE: Entries in this Table of Contents which list (with Temp/Speed or GPS Receiver), or
(with PC Connect Cable Only) require the purchase of separate accessories. You can visit our
Customer Resource Center at 1-800-633-1468.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:40 AM Page 6
How Sonar Works
Sonar technology is based on sound waves. The 700 Series™ Fishing System
uses sonar to locate and define structure, bottom contour and composition, as
well as depth directly below the transducer.
Your 700 Series™ Fishing System sends a sound wave signal and determines
distance by measuring the time between the transmission of the sound wave
and when the sound wave is reflected off of an object; it then uses the
reflected signal to interpret location, size, and composition of an object.
Sonar is very fast. A sound wave can travel from the surface to a depth of
240 ft (70 m) and back again in less than 1/4 of a second. It is unlikely that
your boat can "outrun" this sonar signal.
SONAR is an acronym for SOund and NAvigation
Ranging. Sonar utilizes precision sound pulses or
"pings" which are emitted into the water in a
teardrop-shaped beam.
The sound pulses "echo" back from objects in the
water such as the bottom, fish and other
submerged objects. The returned echoes are
displayed on the LCD screen. Each time a new
echo is received, the old echoes are moved
across the LCD, creating a scrolling effect.
When all the echoes are viewed side by side, an
easy to interpret "graph" of the bottom, fish and
structure appears.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:40 AM Page 7
The sound pulses are transmitted at various
frequencies depending on the application. Very
high frequencies (455kHz) are used for greatest
definition but the operating depth is limited. High
frequencies (200kHz) are commonly used on
consumer sonar and provide a good balance
between depth performance and resolution. Low
frequencies (83kHz) are typically used to achieve
greater depth capability.
The power output is the amount of energy
generated by the sonar transmitter. It is
commonly measured using two methods:
• Root Mean Square (RMS) measures power
output over the entire transmit cycle.
• Peak to Peak measures power output at the
highest points.
The benefits of increased power output are the ability to detect smaller targets
at greater distances, ability to overcome noise, better high speed performance
and enhanced depth capability.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:40 AM Page 8
DualBeam PLUS™ Sonar
Your 700 Series™ Fishing System uses a 200/83 kHz
DualBeam PLUS™ sonar system with a wide (60°)
area of coverage. DualBeam PLUS™ sonar has a
narrowly focused 20° center beam, surrounded by a
second beam of 60°, expanding your coverage to an
area equal to your depth. In 20 feet of water, the wider
beam covers an area 20 feet wide. The 20° center
beam is focused on the bottom, to show you structure,
weeds and cover. The 60° wide beam is hunting for
fish in the wide coverage area. DualBeam PLUS™
sonar returns can be blended together, viewed
separately or compared side-by-side. DualBeam
PLUS™ is ideal for a wide range of conditions - from
shallow to very deep water in both fresh and salt
water. Depth capability is affected by such factors as
boat speed, wave action, bottom hardness, water
conditions and transducer installation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:40 AM Page 9
QuadraBeam PLUS™ Sonar
(with optional-purchase QuadraBeam PLUS™
transducer)
Your 700 Series™ Fishing System also
supports QuadraBeam PLUS™ sonar with
the purchase of an additional QuadraBeam
PLUS™ transducer. QuadraBeam PLUS™
sonar provides an extremely wide 90° area
of coverage. QuadraBeam PLUS™ starts
with two fan-shaped 35° 455 kHz Side
Structure locating sonar beams to spot fish,
bait and structure to the left and right of the
boat over an area of the bottom that’s
always equal to twice your depth. For a
detailed view below the boat, QuadraBeam
PLUS™ uses DualBeam PLUS™ technology,
with precision 20° and wide 60° beams.
QuadraBeam PLUS™ finds more fish faster,
and can even tell you where to put your bait
by showing if fish are to the left, right or
directly beneath your boat.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:40 AM Page 10
WideSide® Sonar
(with optional-purchase WideSide® transducer)
Your 700 Series™ Fishing System also supports
WideSide® sonar with the purchase of
an additional WideSide® transducer. The
WideSide® transducer is a specialized "side-
looking" transducer that is extremely useful for
bank fishing or looking for bait fish in open
water. The WideSide® transducer uses three
different sonar elements that transmit signals to
the left, right and straight down from your boat.
The downward beam is 200 kHz with a 24° area
of coverage. This beam maintains a continuous
digital depth readout from the bottom directly
beneath your boat. The side beams are 455 kHz
with a 16° area of coverage. The side-looking
elements can be used independently, or
together to locate targets near the surface of
the water on either side of your boat.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:40 AM Page 11
Universal Sonar 2
Your 700 Series™ Fishing System supports Universal Sonar 2, a state-of-the-
art, integrated and protected transducer that is built into the lower unit of
Minnkota trolling motors. With Universal Sonar 2, all wiring is concealed inside
the indestructible composite shaft—out of sight and out of harm’s way, with
no clamps, ties, or exposed wires. Universal Sonar 2 features new temperature
sensing and the performance of DualBeam PLUS™ technology (available with
all Humminbird® DualBeam PLUS™ models). An expanded view and greater
bottom detail gives you a totally new perspective of the water below, along
with optimal sonar performance to help you find fish.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:40 AM Page 12
What’s On the Display
The 700 Series™ Fishing System can display a variety of useful information about
the a
Depth - water depth; can be set to alarm when
the water becomes too shallow.
Cursor - available in Freeze Frame and can be
positioned in the Sonar View to provide depth of a
sonar return and bottom depth below the cursor.
Temperature - water surface temperature.
Timer
-
Elapsed time with Temp/Speed
Accessory or GPS Receiver.
Distance - Distance traveled with Temp/Speed
Accessory or GPS Receiver.
Average Speed - Average speed reading with
Temp/Speed Accessory or GPS Receiver.
Speed - if a Temp/Speed accessory or GPS
Receiver is attached, Fishing System can display
the speed of the boat, and can keep a Triplog of
nautical or statute miles traveled.
Second Sonar Return - when the sonar signal
bounces between the bottom and the surface of the
water and back again. Use the appearance of the
second return to determine bottom hardness. Hard
bottoms will show a strong second return, while soft
bottoms will show a very weak one or none at all.
Cursor Dialog Box - indicates cursor depth on the
display and the depth of the bottom directly below
the cursor. The Latitude and Longitude of the
cursor position, the distance to travel to the cursor
position and the bearing to the cursor position is
shown with a GPS receiver. A waypoint can be
marked at the cursor position for later retrieval
and use with a GPS receiver.
NOTE: Entries in this view that list (with Temp/Speed or GPS Receiver) are available if either
device
information from the GPS receiver will be displayed on the view.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 13
about
the area under and adjacent to your boat, including the following items:
High Sonar Intensity Return
Bait Ball
Thermoclines - layers of water with different
temperatures that appear at different depths and
different times of the year. A thermocline typically
appears as a continuous band of many colors
moving across the display at the same depth.
83 kHz Blue Fish Symbol
Fish - the Fishing System displays fish as
arches and/or fish icons, and can be set to
alarm when a fish of a certain size is detected.
When a target is detected, a Fish ID+™ symbol
appears on the display with the depth displayed
above it. The size of the symbol indicates the
intensity of the sonar return. The unit will
clearly show schools of Bait Fish as "clouds" of
different shapes and sizes, depending on the
number of fish and boat speed.
200 kHz Orange Fish Symbol
Structure - where fish may be hiding.
RTS® (Real Time Sonar) Window
Low Sonar Intensity Return
her
device is connected to the Fishing System. If both devices are connected, then only the
8
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 14
Views
The views available on your Fishing System are:
• Sonar View
• Zoom View
• 200/83 kHz Split Sonar View
• Big Digits View
• Circular Flasher View
• Side Beam View
• WideSide® View.
Sonar View is the default view. When the VIEW key is pressed, the display
cycles through the available views. When the EXIT key is pressed, the display
cycles through the available views in reverse order. Any view can be hidden or
displayed as part of the view rotation using the Views Menu tab.
NOTE: When you change any menu settings that affect the sonar, the view will update
immediately (i.e. you don’t have to exit the menu to apply the change to the screen).
NOTE: Side Beam View and WideSide® View require the purchase of the QuadraBeam™
transducer for the Side Beam View and the WideSide® transducer for the WideSide® View.
contact our Customer Resource Center at 1-800-633-1468.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 15
Sonar View
Sonar View presents a historical log of sonar returns. Depth is always
displayed. Readouts for temperature and speed are automatically displayed if
the appropriate accessory is connected. The most recent sonar returns are
charted on the right side of the window; as new information is received, the
older information is moved across the display to the left. A Digital Depth
Readout is displayed in the upper left corner. A scale with Upper and Lower
Depth Range readouts appears along the right edge of the Sonar View. The
scale indicates the distance from the surface of the water to a depth range
sufficient to show the bottom. Depth Range is automatically selected to keep
the bottom visible on the display, although you can adjust it manually as well
(see Sonar X-Press™ Menu). Five Digital Readouts display information from
optional-purchase accessories.
These information boxes can be customized to show only the information
desired (see Setup Menu Tab, Select Readouts).
Sonar View
Upper Depth
Range
Depth
Cursor
Temperature
Triplog
RTS®
Window
Sonar History
Window
Lower
Depth
Range
Cursor
Dialog Box
NOTE: If the Depth number is flashing, it means that the unit is having trouble locating the
bottom. This usually happens if the water is too deep, the transducer is out of the water, the
boat is moving too fast, or for any other reason that the unit can’t accurately receive
continuous data.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 16
Understanding Sonar History
It is important to understand the significance
of the display. The display does NOT show a
literal 3-dimensional representation of what is
under the water. Each vertical band of data
received by the control head and plotted on the
display represents something that was
detected by a sonar return at a particular time.
As both the boat and the targets (fish) may be
moving, the returns are only showing a
particular segment of time when objects were
detected, not exactly where those objects are
in relation to other objects shown on the
display.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 17
Real Time Sonar (RTS®) Window
A Real Time Sonar (RTS®) Window appears on the right side of the display in
the Sonar View only. The RTS® Window always updates at the fastest rate
possible for depth conditions and shows only the returns from the bottom,
structure and fish that are within the transducer beam. The RTS® Window plots
the depth and intensity of a sonar return (see Sonar Menu - RTS® Window).
The Narrow RTS® Window
indicates the sonar intensity
through the use of colors. Red
indicates a strong return and
blue indicates a weak return.
The depth of the sonar return
is indicated by the vertical
placement of the return on the
display depth scale.
The Wide RTS® Window
indicates the sonar intensity
through the use of a bar
graph. The length of the
plotted return provides an
indication of whether the
return is weak or strong. The
depth of the sonar return is
indicated by the vertical
placement of the return on
the display depth scale. The
Wide RTS® Window does not
make use of grayscale.
Freeze Frame and Cursor
Freeze Frame - Pressing any arrow on the 4-WAY Cursor Control key will freeze
the screen and a cursor will be displayed on the screen. The cursor can be
positioned on the display using the 4-WAY Cursor Control key to determine the
depth of any sonar return. The RTS® Window continues to update in Freeze
Frame. In addition, see the effects of menu setting changes with Instant Image
Update. Pressing EXIT will exit Freeze Frame and the display will start to scroll.
Freeze Frame is available in Sonar, Sonar Zoom and 200/83 kHz Split Sonar Views.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 18
Bottom Presentation
As the boat moves, the unit charts the changes in depth on the display to create
a profile of the Bottom Contour. The type of bottom can be determined from the
return charted on the display. A Hard Bottom such as compacted sediment or flat
rock appears as a thinner line across the display. A Soft Bottom such as mud or
sand appears as a thicker line across the display. Rocky Bottoms have a broken,
random appearance.
Bottom Contour Profile with RTS® Window.
Temp/Speed Accessory is optional.
Rocky Bottom
Hard Bottom
Soft
Bottom
The sonar returns from the bottom, structure and fish can be represented as
either WhiteLine® or Structure ID®. See Sonar Menu Tab: Bottom View for
details on how to set the bottom view.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 19
Structure ID® represents weak returns in blue and strong returns in red.
WhiteLine® highlights the strongest sonar returns in white, resulting in a distinctive
outline. This has the benefit of clearly defining the bottom on the display.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 20
Sonar Zoom View
Sonar Zoom View increases the displayed resolution to separate sonar returns
that are very close together, such as those caused by fish suspended close to
the bottom or within structure. In Zoom View, the display is split to show a
narrow slice of the full range view on the right and the zoomed view on the left.
The full range view on the right also contains the Zoom Preview Box that shows
what part of the full range view is shown in zoom view on the left; the Zoom
Preview Box tracks the bottom in the full range view.
As the depth changes, the zoomed view updates automatically to display a
magnified image of the bottom. The Zoom Preview Box shows where the
zoomed view is in relation to the full range view. The Zoom Level, or
magnification, is displayed in the lower left corner and can be changed to suit
conditions (see Sonar X-Press™ Menu: Zoom Level). Upper and Lower Zoom
Depth Range numbers indicate the depth of the water which is being viewed.
Digital depth is displayed in the upper left hand corner. The digital readouts in
the Sonar Zoom View cannot be customized; therefore, information such as
water temperature and voltage are unavailable in the Sonar Zoom View.
Sonar Zoom View
Upper Depth Range,
Full Range View
Depth
Upper Depth Range,
Zoom View
Full Range
View
Zoom
Preview Box
Zoomed
View
Lower Depth Range,
Zoom View
Lower Depth Range,
Full Range View
Zoom
Level
15
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 21
200/83 kHz Split Sonar View
Split Sonar View displays sonar returns from the 83 kHz wide beam on the left side
of the screen and displays sonar returns from the 200 kHz narrow beam on the
right side of the screen. Depth is always displayed in the upper left hand corner.
You can use the Split Sonar View to make side by side comparisons between the
sonar returns from the 83 kHz wide beam and the 200 kHz narrow beam.
The digital readouts in the Split Sonar View cannot be customized; therefore,
information such as water temperature and voltage are unavailable in the Split
Sonar View.
200/83 kHz Split Sonar View
Upper
Depth
Depth Range
200 kHz
Sonar History
Window
83 kHz
Sonar History
Window
Lower
Depth Range
16
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 22
Big Digits View
Big Digits View provides digital data in a large, easy-to-see format. Depth is
always displayed. Readouts for temperature, speed and Triplog information are
displayed automatically if the appropriate accessory is connected to the
system. The Triplog shows distance traveled, average speed, and time elapsed
since the Triplog was last reset. The digital readouts in the Big Digits View
cannot be customized.
Big Digits View
Timer shows the time
elapsed since Triplog
was last reset
Depth
Distance is the
distance traveled since
the Triplog was last
reset
Temperature
Voltage displays the
battery voltage.
Average Speed shows
the speed since the
Triplog was last reset
Speed
17
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 23
Circular Flasher View
Circular Flasher View displays Real Time Sonar (RTS®) data in the traditional
flasher format. Depth and temperature are always displayed. The digital
readouts in the Circular Flasher View cannot be customized.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 24
Side Beam View
(with optional-purchase QuadraBeam PLUS™ transducer)
Side Beam View is only available if you have connected an optional-purchase
QuadraBeam™ transducer accessory and when Transducer Select is set to
QuadraBeam (see Sonar Menu Tab: Transducer Select). The QuadraBeam
PLUS™ transducer requires a separate purchase. This view shows sonar
information from both the left and right 455 kHz beams and the 200 kHz down-
looking beam in one view. You can customize the way the sonar data is
displayed in the Side Beam View to suit your personal preferences. Depending
on the layout selected from the Quad Layout Sonar X-Press™ menu (only
available on the Sonar X-Press™ menu when in Side Beam View), the display
will represent the same sonar data in one of the following three layouts:
Default, Classic, and Slanted.
Default layout: The top portion of the display presents a historical log of sonar
returns from the 200 kHz down-looking sonar beam. New information in the
down beam panel scrolls from right to left. The bottom portion of the display
presents a historical log of sonar returns from the 455 kHz right- and left-
looking sonar beams. New information in the side beam panels scrolls from the
center out.
Side Beam View, Default Layout
Depth
200 kHz
Sonar
History
Window
Water Surface Line
Temperature
for 455 kHz
Sonar History
Windows
Left Side 455
kHz Sonar
History Window
Right Side
455 kHz
Sonar
History
Window
19
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 25
Classic layout: The top portion of the display presents a historical log of sonar
returns from the 200 kHz down-looking sonar beam. New information in the
down beam panel scrolls from right to left. The bottom portion of the display
presents a historical log of sonar returns from the 455 kHz right- and left-
looking sonar beams. New information appears at the top, and scrolls down the
display.
Side Beam View, Classic Layout
Depth
200 kHz
Sonar
History
Window
Water Surface Line
for 455 kHz
Temperature
Sonar History
Windows
Left Side 455
kHz Sonar
History Window
Right Side
455 kHz
Sonar
History
Window
20
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 26
Slanted layout: This layout presents the two 455 kHz side sonar beams and the
200 kHz down-looking sonar beam as three panels of historical data. This layout
is presented as three slanted panels. New information appears on the right,
and scrolls to the left.
Side Beam View, Slanted Layout
Depth
Left Side
455 kHz Sonar
History Window
200 kHz Sonar
HistoryWindow
Right Side
455 kHz Sonar
History Window
In all of these layouts, the sonar information from the side-looking beams
reveals bottom contour, structure and fish similar to the down-looking beam,
but the area covered is to the left and right of the area shown in the down-
looking portion, so you actually see more of the bottom. The distance covered
by the right and left beams is based on the depth setting for the down-looking
beam, up to a maximum of 160 feet.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 27
WideSide® View
(with optional-purchase WideSide® transducer)
WideSide® View is only available if you have connected a WideSide® transducer
accessory and when Transducer Select is set to WideSide® (see Sonar Menu Tab:
Transducer Select). The WideSide® transducer requires a separate purchase. The
WideSide® View displays information from the 455 kHz WideSide® transducer.
Three views are available: Left, Right and Both. The default view is Both.
Information from both the left and right beams are displayed simultaneously. The
depth of the water beneath the boat is always displayed. A bottom contour may
be present while bank fishing or fishing river channels. When fishing in the open
water, a bottom contour will not be present, and only sonar returns from either
debris or fish will be displayed.
WideSide View
Left Side
View
Right Side View
Open Water
(no bottom
contour visible
on-screen)
Bank
Contour
Water
Surface Line
Temperature
Depth
22
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 28
Key Functions
Your Fishing System user interface consists of a set of easy-to-use keys that
work with various on-screen views and menus to give you flexibility and control
over your fishing experience.
POWER/LIGHT Key
The POWER/LIGHT key is used to turn the Fishing System on and
off, and also to adjust the backlight and contrast of the display.
Press the POWER/LIGHT key to turn the unit on. The Title screen is then
displayed until the Fishing System begins sonar operation.
To adjust the backlight, or to adjust the display
background color, press the LIGHT key to access
the Light and Background menu. Use the 4-WAY
Cursor key to select Light or Background and then
use the LEFT or RIGHT Cursor key to change the
settings. Press EXIT to exit the Light and
Background menu.
Press and hold the POWER/LIGHT key for 3 seconds to turn the unit off. A
message will appear telling you how many seconds there are until shutdown
occurs. Your Fishing System should always be turned off using the
POWER/LIGHT key. This will ensure that shutdown occurs properly and any
menu settings will be saved.
VIEW Key
The VIEW key is used to cycle through all available views. Press the
VIEW key to advance to the next view. Repeatedly pressing VIEW
cycles through all views available. Views can be hidden to optimize
the system to your fishing requirements (see Views Menu Tab).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 29
MENU Key
The MENU key is used to access the menu system.
Start-Up Options Menu - Press the MENU key during the power up sequence
to view the Start-Up Options menu.
X-Press™ Menu - Press the MENU key once for the Sonar X-Press™ Menu. The X-
Press™ Menu allows you to access frequently-used settings without having to
navigate through the whole menu system. When the X-Press™ Menu is displayed,
you can use the UP or DOWN Cursor keys to move to a particular menu choice. As
soon as you alter a parameter (using the RIGHT or LEFT Cursor keys) the X-Press™
Menu will collapse temporarily, and the screen will update if it is affected by your
menu setting change, allowing you to see the effects of your action immediately.
Reactivate the X-Press™ Menu by using the UP or DOWN Cursor keys.
Main Menu - Press the MENU key twice for the tabbed Main Menu System.
The Main Menu System is organized under tabbed headings to help you find a
specific menu item quickly: Alarms, Sonar, Setup, Views and Accessories tabs
are part of your tabbed Main Menu System. Use the LEFT or RIGHT 4-WAY
Cursor Control key to select a tab; then use the DOWN or UP key to select the
menu item, and the LEFT or RIGHT key to alter a menu setting.
4-WAY Cursor Control Key
The 4-Way Cursor Control Key has multiple functions, depending on
the situation:
• Use the DOWN or UP arrow keys to select a menu choice from the menu
list, then use the LEFT or RIGHT arrow keys to change a menu setting.
NOTE: Menu choices are implemented and saved immediately - no further action is required.
• In all Sonar views but the Big Digits view, pressing any 4-WAY Cursor
Control key will activate Freeze Frame and will then allow you to
position the cursor on the display.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 30
EXIT Key
The EXIT key has multiple functions, depending on the situation:
• If an alarm is sounding, pressing EXIT will cancel the alarm.
• If a menu tab is selected, pressing EXIT will exit the menu mode and
return to the view.
• If a menu is active, pressing EXIT will return to the previous level in the
menu system.
• Pressing EXIT will cycle through the available views in reverse order.
• If Freeze Frame is active, pressing EXIT will return to a scrolling display.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 31
Accessory Bus
Use the Accessory Bus to expand the functionality of the Fishing System.
Accessories plug directly into the Fishing System, enabling Advanced features
such as WeatherSense®, GPS Functionality and the SmartCast® Wireless Sonar
Link. Additional menu tabs and menu choices will be added to the menu
system automatically when an accessory is plugged into the unit. In addition,
multiple accessories can be attached simultaneously. See Accessories Menu
Tab and 700 Series™ Fishing System Accessories in this manual, as well as
your accessory's Operations Manual for additional details.
NOTE: Accessories to enable WeatherSense®, GPS Functionality and the SmartCast®
Wireless Sonar Link require separate purchases. You can visit our website at
additional details.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 32
Powering Up the Unit
Turn on your Fishing System by pressing the POWER/LIGHT key. The Title
screen is displayed until the Fishing System begins operation. Your Fishing
System will begin Normal or Simulator operation, depending on the presence
or absence of a transducer.
777c2 Title Screen
777c2
27
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 33
The Menu System
The menu system is divided into easy-to-use menu modules. The main
components of the menu system are:
Start-Up Options Menu - Press the MENU key during the power up sequence
to view the Start-Up Options menu.
X-Press™ Menu - The X-Press™ Menu allows you
to access the settings that are changed frequently
without having to navigate through the whole
menu system. Press the MENU key once to
display the X-Press™ Menu. When you select a
menu item from the X-Press™ Menu, the menu
will collapse, leaving only the menu choice on the
screen. Use the UP or DOWN Cursor keys to
X-Press™ Menu
reactivate the X-Press™ Menu.
NOTE: The X-Press™ Menu choices will vary depending on which view is active when you press
the MENU key, as well as whether you are in Normal or Advanced User Mode.
Main Menu Tabs - Less frequently-adjusted
menus are grouped into the Main
Menu System. The Main Menu system is
organized under the following tab headings to
help you find a specific menu item quickly:
Alarms, Sonar, Setup, Views, and Accessories.
Press the MENU key twice for the Main Menu,
then use the 4-WAY Cursor LEFT or RIGHT key to
select a tab, and use the DOWN or UP key to
select a specific menu item under that tab, then
use the LEFT or RIGHT keys again to change a
menu setting. Press the EXIT key to move
quickly to the top of the tab. A down arrow at
Main Menu System
Normal User Mode
the bottom of a menu means that you can scroll
to additional menu choices using the DOWN Cursor key. A right or left arrow
on a menu choice means that you can use the RIGHT or LEFT Cursor keys to
make changes or to see more information.
NOTE: The Main Menu choices will vary depending on whether you are in Normal or
Advanced User Mode.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 34
User Mode (Normal or Advanced) - An Advanced Mode is provided for users
who desire the highest level of control over the Fishing System and Normal
Mode for users who desire greater simplicity and fewer menu choices.
Additional Advanced menu choices will be displayed throughout the menu
system when you navigate to specific menus while in Advanced Mode. Any
changes made while in Advanced Mode will remain in effect after you switch
back to Normal Mode. See Setup Menu Tab: User Mode for specific
instructions on changing to Advanced User Mode.
Sonar Tab,
Normal Mode
Sonar Tab,
Advanced Mode
Total Screen Update - when you change any menu settings that affect the
Sonar View, the view will update immediately (i.e. you don’t have to exit the
menu to apply the change to the screen).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 35
Start-Up Options Menu
Press the MENU key when the Title screen is displayed to access the Start-Up
Options menu.
Use the UP or DOWN 4-WAY Cursor keys to position the cursor, then the RIGHT
Cursor key to select one of the following choices. If you wait too long, the
system will default to whichever menu mode happens to be highlighted:
• Normal
• Simulator
• System Status
• PC Connect (use with PC Connect Cable).
See the following paragraphs for more information about each of these choices.
Normal Operation
Use Normal operation for on the water operation with a transducer connected.
In addition, your Fishing System uses advanced transducer detection methods
to determine if a transducer is connected. If a functioning transducer is
connected, Normal operation will be selected automatically at power up and
your Fishing System can be used on the water.
Exit Normal operation by powering your Fishing System off.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 36
Simulator
Use the Simulator to learn how to use your Fishing System before taking your
boat on the water. The Simulator is a very powerful tool that simulates on the
water operation, providing a randomly-updated display. We recommend going
through this manual while using the Simulator, since all of the menus function
and affect the display the way they actually do when in Normal operation.
Simulator (shown with optional-purchase
Weathersense® attached)
NOTE: To get the full benefit of the Simulator, it is important to select Simulator manually from
the Start-Up Options menu as opposed to letting the Fishing System enter Simulator
automatically (as it will if a transducer is not connected and you do nothing during power up).
Manually selecting Simulator from the Start-Up Options menu allows you to pre-configure your
Fishing System for on the water operation. Any menu changes you make will be saved for
later use.
A message will appear on the display periodically to remind you that you are
using the Simulator.
Exit the Simulator by powering your Fishing System off.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 37
System Status
Use System Status to view system connections and to conduct a unit self-test.
The following screens are displayed in turn when you press the VIEW button
when using System Status:
• Self Test
• Accessory Test.
Self Test
Self Test displays results from the internal diagnostic self test, including unit
serial number, Printed Circuit Board (PCB) serial number, software revision,
total hours of operation and the input voltage.
Self Test Screen
32
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 38
Accessory Test
Accessory Test lists the accessories connected to the system.
System Status Accessory Test Screen
NOTE: The speed accessory will be detected only if the paddlewheel has moved since your
Fishing System was powered up.
Exit System Status by powering your Fishing System off.
PC Connect
(with PC Connect Cable only)
Use PC Connect to update the control head software. This feature requires the
use of the PC Connect Cable. Complete instructions are included with the PC
Connect Cable accessory.
NOTE: The PC Connect Cable requires a separate purchase. For more information visit
1-800-633-1468.
Exit PC Connect mode by powering the Fishing System off.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 39
Sonar X-Press™ Menu
The Sonar X-Press™ Menu provides access to
the settings most frequently-used. Press the
MENU key once while in any of the Sonar Views
to access the Sonar X-Press™ Menu.
NOTE: Upper Range only appears in Advanced User
Mode when in Sonar, Split Sonar, Big Digits and Circular
Flasher Views.
NOTE: Zoom Level only appears in Sonar Zoom View.
NOTE: Quad Layout only appears in Side Beam View with
optional-purchase QuadraBeam PLUS™ transducer.
Sonar X-Press™ Menu
34
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:41 AM Page 40
Side
(WideSide® transducer: WideSide® view only)
Side sets which transducer beam from the WideSide® Transducer is shown in
the WideSide® View. A WideSide® transducer must be connected to the Fishing
System. The Side menu choice is available when Transducer Select is set to
WideSide® (see Sonar Menu Tab: Transducer Select) and can only be
accessed from the Sonar X-Press™ menu when you are in WideSide® view.
NOTE: Side requires the purchase of the WideSide® transducer. You can visit our website at
www.humminbird.com to order this accessory online or contact our Customer Resource
Center at 1-800-633-1468.
To adjust the Side:
1. Make sure you are in WideSide® Transducer Mode and that a
WideSide® transducer is connected, then highlight Side on the Sonar
X-Press™ menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Side
setting. (L [Left], Both, R [Right], Default = Both).
35
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 41
Sensitivity
Sensitivity controls how much detail is shown on
the display and will adjust the sensitivity of all sonar frequencies. Increasing
the sensitivity shows more sonar returns from small baitfish and suspended
debris in the water; however, the display may become too cluttered. When
operating in very clear water or greater depths, increased sensitivity shows
weaker returns that may be of interest. Decreasing the sensitivity eliminates
the clutter from the display that is sometimes present in murky or muddy water.
If Sensitivity is adjusted too low, the display may not show many sonar returns
that could be fish.
NOTE: The Sensitivity setting is a global setting and will adjust the sensitivity of all sonar
frequencies, as compared to specific sensitivity adjustments (such as 83 kHz Sensitivity,
455 kHz Balance or Wideside Sensitivity) which allow you to adjust the level of sensitivity for
one specific beam at a time.
Sensitivity at Medium
Sensitivity at Low
Sensitivity at High
To adjust the Sensitivity:
1. Highlight Sensitivity on the Sonar X-Press™ Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or
decrease the Sensitivity setting. (Low = 1, High = 20, Default = 10)
36
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 42
Upper Range
(Advanced: Sonar, Split Sonar, Big Digits and
Circular Flasher Views only)
Upper Range sets the shallowest depth range that will be displayed on the
Sonar, Split Sonar, Big Digits and Circular Flasher views. The Upper Range menu
choice is available when User Mode is set to Advanced (see Setup Menu Tab:
User Mode) and can only be accessed from the Sonar, Split Sonar, Big Digits
and Circular Flasher views. Upper Range is often used with Lower Range.
For example, if you are only interested in the area between 20 and 50 feet deep,
you should set the Upper Depth Range to 20 and the Lower Depth Range to 50.
The Sonar View will then show the 30 foot area between 20 and 50, and will not
show the surface or the bottom (assuming the bottom is deeper than 50 feet), and
will show greater detail for that area between 20 and 50 feet.
NOTE: A minimum distance of 10 feet will be maintained between the Upper and Lower
Range regardless of the manual settings entered.
To adjust the Upper Range:
1. Make sure you are in Advanced Mode, then highlight Upper Range on
the Sonar X-Press™ Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or
decrease the Upper Range setting. (0 to 1490 feet or 0 to 497 meters
[International Models only], Default = 0)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 43
Lower Range
Lower Range sets the deepest depth range that
will be displayed. Automatic is the default setting. When in automatic mode,
the lower range will be adjusted by the unit to follow the bottom. Selecting a
specific setting locks the depth range into Manual mode. Use both Upper and
Lower Range together to view a specific depth range manually when looking
for fish or bottom structure.
the screen when you start manually adjusting the Lower Range to indicate that
you are in Manual mode.
will be displayed in the lower right corner of
M
For example, if you are fishing in 60 feet of water but are only interested in
the first 30 feet (surface to a depth of 30 feet) you should set the Lower
Depth Range limit to 30. The display will show the 0 to 30 foot range,
allowing you to see a more detailed view than you would see if the display
went all the way to the bottom.
NOTE: A minimum distance of 10 feet will be maintained between the Upper and Lower
Range regardless of the manual settings entered.
To adjust the Lower Range:
1. Highlight Lower Range on the Sonar X-Press™ Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or
decrease the Lower Range setting. (AUTO, 10 to 1500 feet, 3 to 500
meters [International Models only], Default = AUTO)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 44
Side Beam Range
(WideSide® transducer: WideSide® view only)
Side Beam Range sets the deepest range that will be displayed in the
WideSide® View. The range must be set manually to keep the bottom visible on
the display. If the Side Beam Range is set too deep for current depth conditions
the sonar information will become compressed on the display and valuable
detail will be lost. A WideSide® transducer must be connected to your Fishing
System. Side Beam Range menu choice is available when Transducer Select is
set to WideSide® (see Sonar Menu Tab: Transducer Select) and can only be
accessed from the WideSide® view.
NOTE: The Side Beam Range requires the purchase of the WideSide® transducer. You can visit
Resource Center at 1-800-633-1468.
To adjust the Side Beam Range:
1. Make sure you are in WideSide® Transducer Mode and that a
WideSide® transducer is connected, then highlight Side Beam Range
on the Sonar X-Press™ menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or
decrease the Side Beam Range setting. (6 - 160 feet [2 - 50 meters]
[International Models only], Default = 160 feet [50 meters])
39
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 45
Chart Speed
Chart Speed determines the speed at which the
sonar information moves across the display, and consequently the amount of
detail shown. A faster speed shows more information and is preferred by most
anglers; however, the sonar information moves across the display quickly. A
slower speed keeps the information on the display longer, but the bottom and fish
details become compressed and may be difficult to interpret. Regardless of the
Chart Speed setting, the RTS® Window will update at the maximum rate possible
for the depth conditions. Adjust Chart Speed to your personal preference.
To adjust the Chart Speed:
1. Highlight Chart Speed on the Sonar X-Press™ Menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to increase or
decrease the Chart Speed setting. (1-9, Ultra, where 1 = Slow, 9 = Fast,
Ultra = Fastest, Default = 5)
Quad Layout
(with Optional-Purchase QuadraBeam PLUS™
Transducer, Side Beam View only)
Quad Layout selects the method used to represent the sonar information from
the two side-looking beams plus the down-looking beam to be presented on
the Side Beam View, and is only available when an optional-purchase
QuadraBeam PLUS™ transducer is attached and the Side Beam View is active.
Use Quad Layout to change the way the Side Beam View is displayed. See Side
Beam View for more information.
To adjust the Quad Layout:
1. Highlight Quad Layout on the Sonar X-Press™ menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Quad
Layout setting for the Side Beam View. (Default, Classic, Slanted,
Default = Default)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 46
Zoom Level
(Sonar Zoom View only)
Zoom Level sets the magnification level for the Sonar Zoom View, and is only
available on the X-Press™ Menu when the Sonar Zoom View is active and
Bottom Lock is off. Use Zoom to increase the display resolution to separate
sonar returns that are very close together.
To adjust the Zoom Level:
1. Highlight Zoom Level on the Sonar X-Press™ Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Zoom
Level setting for the Sonar Zoom View. (2x, 4x, 6x, 8x, Default = 2x)
NOTE: The Zoom Preview Box tracks the bottom and cannot be moved by the user.
Bottom Lock
(Sonar Zoom View only)
Bottom Lock changes the mode of the Zoomed view in the Sonar Zoom View.
Bottom Lock continuously graphs the bottom at a constant point on the display
regardless of changes in depth. This "flattens" out the bottom contour, but is
effective at showing fish on or near the bottom.
To turn on Bottom Lock:
1. In the Sonar Zoom View, highlight Bottom Lock on the Sonar X-Press™
Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Bottom Lock setting to on. (Off, On, Default = Off)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 47
Bottom Range
(Sonar Zoom View only, when Bottom Lock is On)
Bottom Range allows you to control how much of the water column, measured
up from the bottom, is shown in the Sonar Zoom View, and is only available in
the Sonar X-Press™ menu when the Sonar Zoom View is active and Bottom
Lock is on. Choose a small value to see low-lying bottom structure or details of
the bottom return. Choose a larger value to see large structure in deeper water.
It is possible to set the Bottom Range to be greater than the depth. In this case,
you may see surface clutter in a wavy band that mirrors changes in the depth.
To adjust the Bottom Range:
1. In the Sonar Zoom View, highlight Bottom Lock on the Sonar X-Press™
Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Bottom Lock setting to on.
3. Once you turn on Bottom Lock, the Bottom Range X-Press™ menu
choice will be displayed. (10 - 60 feet, 2-10 fathoms, or 3-20 meters
[International Models only], Default = 15 feet)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 48
Sonar Menu Tab
Press the MENU key twice to access the Main
Menu System and then press the RIGHT Cursor
key to select the Sonar tab.
NOTE: Menu choices will vary depending on system
settings such as whether the unit is set for Advanced User
mode or what transducer is currently selected.
Sonar Menu
43
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 49
Beam Select
Beam Select sets which sonar returns from the
transducer will be displayed on the screen.
When set to 200/83 kHz, the returns from both beams are blended by
starting with the 83 kHz wide beam return, dimming it, and then overlaying
it with the 200 kHz narrow beam return. The darker 200 kHz narrow beam
sonar returns will stand out from the paler 83 kHz wide beam sonar returns.
The Split Sonar View continues to display the sonar returns from each beam
in their respective windows. The blended information is shown in the Sonar
View, Sonar Zoom View and the Big Digits View. The RTS® Window in the
Sonar View and the Circular Flasher View will only show the returns from the
200 kHz narrow beam.
When set to 200 kHz, only the returns from the 200 kHz narrow beam will be
displayed in the Sonar View, the Sonar Zoom View, the Big Digits View and
the Circular Flasher View. The Split Sonar View will continue to display returns
from both beams in their respective windows. The RTS® Window in the Sonar
View will display the returns from the 200 kHz narrow beam.
When set to 83 kHz, the returns from the 83 kHz wide beam will be displayed
in the Sonar View, the Sonar Zoom View, the Big Digits View and the Circular
Flasher View. The Split Sonar View will continue to display returns from both
beams in their respective windows. The RTS® Window will display the returns
from the 83 kHz wide beam.
To use Beam Select:
1. Highlight Beam Select on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to select either the
200 kHz beam, the 83 kHz beam or the 200/83 kHz beams. (200/83 kHz,
200 kHz, 83 kHz, Default = 200 kHz)
44
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 50
Fish ID+™
Fish ID+™ uses advanced signal processing to
interpret sonar returns, and will display a Fish Symbol when very selective
requirements are met. When a fish is detected, a fish icon and its depth are
displayed above the return that has been classified as being a fish. Three different
fish size icons represent the intensity of the sonar return, and provide an indicator
of relative fish size.
DualBeam PLUS™ sonar models represent targets detected in the 200 kHz
narrow beam as Orange Fish Symbols, and represent targets detected in the 83
kHz wide beam as Blue Fish Symbols.
83 kHz, Wide Beam
Blue Fish Symbols
200 kHz, Narrow Beam
Orange Fish Symbols
When Fish ID+™ is turned off, the Fishing System shows only the raw sonar
returns on the display. These returns will often result in "arches" forming on the
display, indicating potential targets. Due to the transducer beam angle, the
distance to a fish decreases as the fish moves into the beam, and then
increases as it moves out again, creating a Fish Arch when this distance change
is shown on the display. Boat speed, chart speed, and the position of the fish
within the sonar beam greatly affect the shape of the arch.
Transducer Cone and Fish Arches
To turn Fish ID+™ on or off:
1. Highlight Fish ID+ on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn the Fish ID+™
setting On or Off. (Off, On, Default = Off)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 51
Fish ID Sensitivity
Fish ID Sensitivity adjusts the threshold of the
Fish ID+™detection algorithms. Selecting a higher setting allows weaker returns
to be displayed as fish. This is useful for identifying smaller fish species or
baitfish. Selecting a lower setting displays fewer fish from weak sonar returns.
This is helpful when seeking larger species of fish. Fish ID Sensitivity is used in
conjunction with Fish ID+™. Fish ID+™ must be On for Fish ID Sensitivity to
affect the ability of the Fishing System to identify sonar returns as fish.
To change the Fish ID Sensitivity setting:
1. Highlight Fish ID Sensitivity on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish
ID Sensitivity setting. (Low = 1, High = 10, Default = 5)
Real Time Sonar (RTS®) Window
RTS® Window sets the RTS® Window to either
Wide or Narrow, or turns it off in the Sonar View. The RTS® Window always
updates at the fastest rate possible and only displays returns that are within the
transducer beam. (See Real Time Sonar (RTS®) Window for additional detail).
RTS® Window (Wide)
RTS® Window (Narrow)
RTS® Window (Off)
To change the RTS® Window setting:
1. Highlight RTS Window on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the RTS®
Window setting. (Wide, Narrow, Off, Default = Narrow)
46
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 52
Bottom View
Bottom View selects the method used to
represent bottom and structure on the display. Structure ID® represents weak
returns in blue and strong returns in red. WhiteLine® highlights the strongest
sonar returns in white resulting in a distinctive outline. This has the benefit of
clearly defining the bottom on the display. (See Bottom Presentation for
more information).
To adjust the Bottom View:
1. Highlight Bottom View on the Sonar menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the
Bottom View setting.(Structure ID, WhiteLine, Default = Structure ID)
Zoom Width
Zoom Width adjusts the width of the Zoom
window on the Sonar Zoom View.
To change the Zoom Width Setting:
1. Highlight Zoom Width on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Zoom
Width setting. (Narrow, Medium, Wide, Default = Wide)
47
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 53
83 kHz Sensitivity
(Advanced)
83 kHz Sensitivity changes the sensitivity of the 83 kHz beam. Increasing the
83 kHz Sensitivity will display additional weak returns and decreasing the 83
kHz Sensitivity will display fewer weak returns. The 83 kHz Sensitivity menu
choice is only available when User Mode is set to Advanced (see Setup Menu
Tab: User Mode).
NOTE: 83 kHz Sensitivity is particularly useful for adjusting the sensitivity of the 83 kHz sonar
returns in the 200/83 kHz Split Sonar View. The 83 kHz sensitivity can be adjusted without
affecting the sensitivity of the 200 kHz returns shown in the 200 kHz sonar window.
To set the 83 kHz Sensitivity:
1. Make sure you are in Advanced User Mode, then highlight 83 kHz
Sensitivity on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to set the 83 kHz
Sensitivity. (-10 to +10, Default = 0)
48
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 54
455 kHz Sensitivity
(Advanced: with QuadraBeam PLUS™ transducer)
455 kHz Sensitivity adjusts the sensitivity of the 455 kHz beam. Increasing the
sensitivity will display additional weak returns and decreasing the sensitivity
will display fewer weak returns. A QuadraBeam PLUS™ transducer must be
attached to the Fishing System. The 455 kHz Balance menu choice is available
when Transducer Select is set to QuadraBeam (see Sonar Menu Tab:
Transducer Select) and User Mode is set to Advanced (see Setup Menu Tab:
User Mode).
NOTE: The 455kHz Balance requires the purchase of the QuadraBeam PLUS™ transducer. You
Customer Resource Center at 1-800-633-1468.
NOTE: 455 kHz Balance is particularly useful for adjusting the sensitivity of the 455 kHz sonar
returns in the Side Beam View. The 455 kHz sensitivity can be adjusted without affecting the
sensitivity of the 200 kHz returns shown in the 200 kHz sonar window.
To change the 455 kHz Sensitivity setting:
1. Make sure you have selected QuadraBeam Transducer and Advanced
Mode and that the QuadraBeam PLUS™ transducer is connected, then
highlight 455 kHz Sensitivity on the Sonar Main Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
455 kHz Sensitivity. (-10 to +10, Default = 0)
49
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 55
WideSide® Sensitivity
(Advanced: with WideSide® transducer)
WideSide® Sensitivity adjusts the sensitivity of the WideSide® beam. Increasing
the sensitivity will display additional weak returns and decreasing the sensitivity
will display fewer weak returns. A WideSide® transducer must be attached to the
Fishing System. The WideSide® Sensitivity menu choice is available when
Transducer Select is set to WideSide® (see Sonar Menu Tab: Transducer Select)
and User Mode is set to Advanced (see Setup Menu Tab: User Mode).
NOTE: The WideSide® Sensitivity requires the purchase of the WideSide® transducer. You can
Customer Resource Center at 1-800-633-1468.
NOTE: WideSide® Sensitivity is particularly useful for adjusting the sensitivity of the
455 kHz sonar returns in the WideSide® View. The 455 kHz sensitivity can be adjusted without
affecting the sensitivity of the other sonar frequencies.
To change the WideSide® Sensitivity setting:
1. Make sure you have selected WideSide® Transducer and Advanced
Mode and that the WideSide® transducer is connected, then highlight
WideSide® Sensitivity on the Sonar Main Menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
WideSide® Sensitivity. (-10 to +10, Default = 0)
50
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 56
Depth Lines
(Advanced)
Depth Lines divide the display into four equal sections which are separated by
three horizontal depth lines. The depth of each line is displayed along the depth
scale. You can either turn Depth Lines On or Off. The Depth Lines menu choice is
available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).
Depth Lines
Depth
Lines
To change the Depth Lines setting:
1. Make sure you are in Advanced User Mode, then highlight Depth Lines
on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn the Depth
Lines setting On or Off. (Off, On, Default = On)
51
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 57
Surface Clutter
(Advanced)
Surface Clutter adjusts the filter that removes surface clutter noise caused by
algae and aeration. The lower the setting, the less surface clutter will be
displayed. The Surface Clutter menu choice is available when User Mode is set
to Advanced (see Setup Menu Tab: User Mode).
Surface
Clutter
To change the Surface Clutter setting:
1. Make sure you are in Advanced User Mode, then highlight Surface
Clutter on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Surface Clutter setting. (Low = 1 to High = 10, Default = 5)
52
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 58
Noise Filter
(Advanced)
Noise Filter adjusts the sonar Noise Filter to limit interference on the display
from sources such as your boat engine, turbulence, or other sonar devices. The
Noise Filter menu choice is available when User Mode is set to Advanced (see
Setup Menu Tab: User Mode).
NOTE: The Off setting removes all filtering; Low, Medium and High1, High2, High3 settings
add progressive filtering of the sonar returns. High1, High2 and High3 are useful when there
is excessive trolling motor noise, but in some deep water situations, the High settings may
actually hinder your unit’s ability to find the bottom.
To change the Noise Filter setting:
1. Make sure you are in Advanced User Mode, then highlight Noise Filter
on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Noise
Filter setting. (Off, Low, Medium, High1, High2, High3, Default = Low)
Max Depth
(Advanced)
Max Depth adjusts the maximum depth of operation. The performance of your
Fishing System can be tuned to the maximum depth you will be fishing in by
setting the Max Depth. When a maximum depth is set, your Fishing System will
not attempt to acquire sonar data below that depth, thus increasing overall
performance. When Max Depth is set to Auto, the Fishing System will acquire
bottom readings as needed (within the capacity of the unit). If the bottom is
deeper than the Max Depth setting, the digital depth readout will flash, indicating
that the Fishing System cannot locate the bottom. The Max Depth menu choice is
available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).
To change the Max Depth setting:
1. Make sure you are in Advanced User Mode, then highlight Max Depth
on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Max
Depth setting. (AUTO, 10 to 1500 feet, 3 to 500 meters [International
Models only], Default = AUTO)
53
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 59
Water Type
(Advanced)
Water Type configures your unit for operation in fresh or salt water. The Water
Type menu choice is available when User Mode is set to Advanced (see Setup
Menu Tab: User Mode).
NOTE: In salt water, what would be considered a large fish might be 2 to 10 times bigger
than a large fish in fresh water (depending on the type of fish you are seeking). The salt water
setting allows for a greater range in fish size adjustment to account for this. Also, make sure
that the Water Type is set accurately, especially in salt water, as this affects the accuracy of
deep water depth readings.
To change the Water Type setting:
1. Make sure you are in Advanced User Mode, then highlight Water Type
on the Sonar main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Water
Type setting. (Fresh, Salt, Default = Fresh)
Transducer Select
Transducer Select allows you to select which
transducer you want to use (the Fishing System comes with a DualBeam PLUS™
transducer, and also supports the optional-purchase QuadraBeam PLUS™ and
WideSide® transducers.)
To change the selected Transducer:
1. Highlight Transducer Select on the Sonar Main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
transducer selected. (DualBeam, QuadBeam, WideSide, Universal
Sonar 2, Default = DualBeam)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 60
Alarms Menu Tab
From any view, press the MENU key twice to
access the Main Menu System. The Alarms tab
will be the default selection.
NOTE: When an alarm is triggered, you can silence it by
pressing any key. The alarm will be silenced, and will not
be triggered again until a new instance of the alarm
condition is detected.
Alarms Menu
55
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 61
Depth Alarm
Depth Alarm sounds when the depth becomes
equal to or less than the menu setting.
To change the Depth Alarm setting:
1. Highlight Depth Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth
Alarm setting. (OFF, 1 to 100 feet, or 0.5 to 30 meters [International
Models only], Default = OFF)
Fish ID Alarm
Fish ID Alarm sounds when the Fishing System
detects fish that correspond to the alarm setting. Fish ID Alarm will only sound if
Fish ID+™ is on.
For example, if you've set the Fish ID Alarm to sound for Large fish only,
the Fish ID alarm will sound when a large-sized fish is detected.
To change the Fish ID Alarm setting:
1. Highlight Fish ID Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID
Alarm setting. (Off, All, Large/Medium, Large, Default = Off)
Off
Large
Large/Medium
All
56
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 62
Low Battery Alarm
Low Battery Alarm sounds when the input battery
voltage is equal to or less than the menu setting. The battery alarm will only
sound for the battery that is connected to the Fishing System. The Low Battery
Alarm should be set to warn you when the battery voltage drops below the
safety margin that you have determined. For instance, if you are running a
trolling motor (battery operated), you would want to set the Low Battery Alarm
to sound before the battery voltage drops too low for it to be used to start your
main, gasoline-powered engine.
To change the Low Battery Alarm setting:
1. Highlight Low Battery Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Low
Battery Alarm setting. (Off, 8.5V - 13.5V, Default = Off)
Aux. Temp. Alarm
(with optional-purchase temp. probe or Temp/Speed only)
Aux. Temp. Alarm sounds when the water temperature (from an optional-
purchase temperature probe or Temp/Speed accessory) detected by the Fishing
System reaches the Aux. Temp. Alarm setting, which is either set in degrees
Fahrenheit or Celsius [International Models only]. For example, if the Aux.
Temp. Alarm is set to 58 degrees Fahrenheit, and the water temperature falls
from 60 degrees to 58 degrees, the Aux. Temp. Alarm will sound. Similarly, if
the water temperature rises from 56 degrees to 58 degrees, the Aux. Temp.
Alarm will also sound.
To change the Aux. Temp. Alarm setting:
1. Highlight Aux. Temp. Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Aux. Temp.
Alarm setting. (Off, 33-120 [Fahrenheit], 0-50 [Celsius], Default = Off)
57
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 63
Temp Alarm
Temp Alarm sounds when the water temperature
(from the temperature probe that is built into the transducer) detected by the
Fishing System reaches the Temp Alarm setting, which is either set in degrees
Fahrenheit or Celsius [International Models only]. For example, if the Temp
Alarm is set to 58 degrees Fahrenheit, and the water temperature falls from 60
degrees to 58 degrees, the Temp Alarm will sound. Similarly, if the water
temperature rises from 56 degrees to 58 degrees, the Temp Alarm will also sound.
To change the Temp Alarm setting:
1. Highlight Temp Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Temp
Alarm setting. (Off, 33-120 [Fahrenheit], 0-50 [Celsius], Default = Off)
Alarm Tone
Alarm Tone selects the pitch of the alarm sound. A
brief tone will be produced as you adjust the Alarm Tone so that you can select
the tone that you can hear best.
To change the Alarm Tone setting:
1. Highlight Alarm Tone on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Alarm
Tone setting. (High, Medium, Low, Default = Medium)
58
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 64
Setup Menu Tab
From any view, press the MENU key twice to
access the tabbed Main Menu System, then
press the RIGHT cursor key until the Setup tab is
selected.
NOTE: Menu choices will vary depending on system
settings such as whether the unit is set for Advanced User
mode, whether it is an International model, or whether a
Temp/Speed or GPS Receiver is currently connected.
Setup Menu
59
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 65
Units - Depth
Units - Depth selects the units of measure for all
depth-related readouts.
To change the Units - Depth setting:
1. Highlight Units - Depth on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units -
Depth setting. (Meters [International Models only], Feet, Fathoms;
Default is Meters for International models, and Feet for Domestic models)
Units - Temp
(International only)
Units - Temp selects the units of measure for all temperature-related readouts.
International Models Only.
To change the Units - Temp setting:
1. Highlight Units - Temp on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Units - Temp setting. (Celsius, Fahrenheit; Default = Celsius)
Units - Distance
(with Temp/Speed or GPS receiver)
Units - Distance selects the units of measure for all distance-related readouts,
and will appear in the menu if a Temp/Speed Accessory is connected and the
paddlewheel has moved at least once, or if a GPS Receiver is connected.
To change the Units - Distance setting:
1. Highlight Units - Distance on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units -
Distance setting. (Domestic Models: Statute Miles, Nautical Miles;
Default = Statute Miles; International Models: Meters/Kilometers,
Meters/Nautical Miles, Feet/Statute Miles, Feet/Nautical Miles; Default =
Meters/Kilometers)
60
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 66
Units - Speed
(with Temp/Speed or GPS receiver)
Units - Speed selects the units of measure for speed-related readouts, and will
appear in the menu if a Temp/Speed Accessory is connected and the
paddlewheel has moved at least once, or if a GPS Receiver is connected.
To change the Units - Speed setting:
1. Highlight Units - Speed on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units
- Speed setting. (kph [International Models only], mph, kts, Default =
kph for International models and mph for Domestic models)
User Mode
User Mode sets the menu system to either Normal or
Advanced. When set to Normal (default setting,) only the basic menu options
are shown. When set to Advanced, additional menu choices are available.
To change the User Mode setting:
1. Highlight User Mode on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the User
Mode setting. (Normal, Advanced, Default = Normal)
Language
(International only)
Language selects the display language for menus. International Models only.
To change the Language setting:
1. Highlight Language on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Language setting. (Default = English)
61
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 67
Triplog Reset
(with Temp/Speed or GPS receiver)
Triplog Reset resets the Triplog to zero, and will
appear in the menu if a Temp/Speed Accessory is connected and the
paddlewheel has moved at least once, or if a GPS Receiver is connected. The
Triplog provides the following information: timer for elapsed time, distance
traveled since last reset, and average speed.
NOTE: See Setup Menu Tab: Select Readouts (Advanced) to find out how to display
Triplog information on the screen.
To Reset Triplog:
1. Highlight Reset Triplog on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.
3. The Confirm dialog box will appear. To reset the Triplog, press the
RIGHT Cursor key once more. To cancel Reset Triplog, press the LEFT
Cursor key.
Restore Defaults
Restore Defaults resets ALL menu settings to their
factory defaults. Use this menu choice with caution!
To Restore Defaults:
1. Highlight Restore Defaults on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults.
3. The Confirm dialog box will appear. To reset the defaults, press the RIGHT
Cursor key once more. To cancel Restore Defaults, press the LEFT Cursor key.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 68
Select Readouts
(Advanced, Sonar view only)
Select Readouts sets individual digital readouts on the Sonar View. This
Advanced feature allows you to select what data will be displayed in each of 5
fixed-position data windows arranged around the left and bottom edges of the
Sonar View screen, or whether a particular window will be turned off,
displaying nothing in that area; you can access this menu choice only when in
Advanced User Mode (see Setup Menu Tab: User Mode).
Data windows can display readouts from
supported accessories such as Temp/Speed.
Each data window can either be empty or
contain one of the following:
• Speed (will be displayed if a Temp/Speed
Accessory is attached and the
paddlewheel has moved at least once, or
if a GPS Receiver is connected)
• Temperature (will display temperature
from the temperature probe that is built in
to the transducer)
• Triplog (will be displayed if a Temp/Speed
Select Readouts
Accessory is attached and the
paddlewheel has moved at least once, or
if a GPS Receiver is connected)
• Voltage
• Aux Temp (will display temperature from
an optional-purchase temperature probe
or Temp/Speed accessory)
• Water Speed (will only be displayed if a
Temp/Speed Accessory is attached and the
paddlewheel has moved at least once).
Water Speed is not available with a GPS
receiver.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 69
Default Sonar View
Customized Sonar View
To Select Readouts:
1. Make sure you are in Advanced User Mode, then highlight Select
Readouts on the Setup main menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate this procedure.
3. The Select Readouts submenu will appear, showing a list of all
Readouts. Use the UP or DOWN Cursor keys to select a particular
Readout position, then use the RIGHT or LEFT Cursor keys to change
what will be displayed at that position. (Off, Speed, Temperature,
Triplog, Aux Temp, Voltage, Water Speed)
64
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 70
Depth Offset
(Advanced)
Depth Offset will adjust the digital depth readout to indicate depth from the
waterline or boat's keel. Enter a positive vertical measurement from the transducer
to the waterline to read the depth from the waterline. Enter a negative vertical
measurement from the transducer to keel to read the depth from the keel. This
menu choice is available only when in Advanced User Mode (see Setup Menu
Tab: User Mode.)
To change the Depth Offset setting:
1. Make sure you are in Advanced User Mode, then highlight Depth
Offset on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth
Offset setting. (-10.0 to +10.0 feet or -3 to 3 meters [International
Models only], Default = 0)
Aux. Temp. Offset
(Advanced; with optional-purchase temp. probe or
Temp/Speed only)
Aux. Temp. Offset will adjust the temperature readout from the optional-
purchase temp. probe or Temp/Speed accessory by the amount entered. This
menu choice is available only when in Advanced User Mode (see Setup Menu
Tab: User Mode) with an optional-purchase temp. probe or Temp/Speed
accessory.
To change the Aux. Temp. Offset setting:
1. Make sure you are in Advanced User Mode, then highlight Aux. Temp.
Offset on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Aux.
Temp. Offset setting. (-10.0 to +10.0 degrees, Default = 0)
65
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 71
Temp Offset
(Advanced)
Temp Offset will adjust the temperature readout by the amount entered. This
menu choice is available only when in Advanced User Mode (see Setup Menu
Tab: User Mode.)
To change the Temp Offset setting:
1. Make sure you are in Advanced User Mode, then highlight Temp Offset
on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Temp
Offset setting. (-10.0 to +10.0 degrees, Default = 0)
Speed Calibration
(Advanced, with Temp/Speed only)
Speed Calibration will adjust the speed readout by the percentage entered, and will
appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel
has moved at least once, when the unit is in Advanced User Mode (see Setup Menu
Tab: User Mode.)
To change the Speed Calibration setting:
1. Make sure you are in Advanced User Mode, then highlight Speed
Calibration on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Speed
Calibration setting. (-20% to +20%, Default = 0%)
66
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 72
Digits Format
(Advanced)
Digits Format allows you to add a tenth decimal place to readouts such as
Temperature and Depth. The format can be changed to small format, large
format or no format. This menu choice is available only when in Advanced User
Mode (see Setup Menu Tab: User Mode.)
To change the Digits Format setting:
1. Make sure you are in Advanced User Mode, then highlight Digits
Format on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Digits
Format setting. (Small tenths, Large tenths, No tenths, Default = Small
tenths)
NOTE: Choosing No tenths will cause the display to present numbers rounded to whole
digits only.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 73
NMEA Output
(Advanced)
NMEA Output turns the NMEA* output on or off. This menu choice is available
only when in Advanced User Mode (see Setup Menu Tab: User Mode.) NMEA
Output should be turned On if you connect the NMEA Output wires of the GPS
Receiver cable to another NMEA-compatible device, such as an autopilot.
*NMEA 0183 is a National Marine Electronics Association standard for data communication.
The following NMEA sentences are output when NMEA Output is turned On:
DPT- Depth
MTW - Water Temperature
GLL - Lat/Lon Position
GGA - GPS Fix Data
RMC - Recommended Minimum Specific GNSS Data
VTG - Course Over Ground and Ground Speed
ZDA - Time and Date
When navigating, the following NMEA sentences are also output when
NMEA Output is turned On:
APB - Autopilot Sentence B
BWR - Bearing and Distance to Waypoint
RMB - Recommended Minimum Navigation Info
To turn NMEA Output on or off:
1. Make sure you are in Advanced User Mode, then highlight NMEA
Output on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the NMEA
Output to On or Off (On, Off, Default = Off).
68
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 74
Views Menu Tab
From any view, press the MENU key twice to
access the tabbed Main Menu System, then
press the RIGHT 4-WAY Cursor Control key until
the Views tab is selected. This menu tab allows
you to set the available views to either hidden or
visible in the view rotation. The view will be
removed from the view rotation if it is set to
Hidden and will be displayed in the view
rotation if it is set to Visible. The following views
are available:
• WideSide® View
(with optional-purchase WideSide®
transducer)
• SideBeam
(with optional-purchase QuadraBeam PLUS®
transducer)
• Sonar
• Sonar Zoom
Views Menu
• Split Sonar
• Big Digits
• Circular Flasher
• Self Test
• Accessory Test.
To change the view status of any view:
1. Highlight the View main menu tab.
2. Use the UP or DOWN 4-WAY Cursor Control keys to select a View.
3. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the status
of the view from Hidden to Visible.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 75
Accessories Menu Tab
From any view, press the MENU key twice to access the tabbed Main Menu
System, then press the RIGHT cursor key until the Accessories tab is selected.
If no accessories are attached to the Accessory Bus, no menu choices will
appear under the Accessories tab. If an accessory is attached, however,
additional menu choices that support the accessory will be added
automatically. See the Operations Manual that comes with your accessory for
detailed information.
Accessories Menu Tab
(no accessories attached)
Accessories Menu Tab
(with accessories attached)
NOTE: Accessories to enable WeatherSense®, GPS Functionality and the SmartCast® Wireless
Sonar Link require separate purchases. You can visit our website at www.humminbird.com
or contact our Customer Resource Center at 1-800-633-1468 for additional details.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 76
Troubleshooting
Before contacting the Humminbird® Customer Resource Center, please read the
following section. Taking the time to review these troubleshooting guidelines
may allow you to solve a performance problem yourself, and therefore avoid
sending your unit back for repair.
700 Series™ Doesn’t Power Up
If your 700 Series™ doesn’t power up, use the Installation Guide that also
comes with it for specific confirmation details, making sure that:
• The power cable is properly connected to the 700 Series™ control head.
• The power cable is wired correctly, with red to positive battery terminal
and black to negative terminal or ground.
• The fuse is operational.
• The battery voltage of the power connector is at least 10 Volts.
Correct any known problems, including removing corrosion from the battery
terminals or wiring, or actually replacing the battery if necessary.
700 Series™ Defaults to Simulator with a Transducer Attached
A connected and functioning transducer will cause the newly-started Fishing
System to go into Normal operating mode automatically. If, when you power up
the Fishing System, it goes into Simulator mode automatically, even though a
transducer is already connected, this means that the control head is not
detecting the transducer. Perform the following troubleshooting tasks:
• Using the Installation Guide that also comes with your Fishing System,
check to make sure that the transducer cable is securely connected to
the Fishing System. Reconnect if necessary, and power up the Fishing
System again to see if this fixes the problem.
• Replace the non-functioning transducer with a known good transducer
if available and power up the control head again.
• Check the transducer cable. Replace the transducer if the cable is
damaged or corroded.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 77
Display Problems
There are several main conditions or sources of possible interference that may
cause problems with the quality of the information displayed on the control
head. Look in the following table for some symptoms of display problems and
possible solutions:
Problem
Possible Cause
The control head loses
power at high speeds.
If the power output of your boat’s engine is unregulated,
the control head may be protecting itself using its over-
voltage protection feature. Make sure the input voltage
does not exceed 20 Volts.
When the boat moves
at higher speeds, the
bottom disappears or
suddenly weakens, or
the display contains
gaps.
The transducer position may need to be adjusted. A mix
of air and water flowing around the transducer
(cavitation) may be interfering with the interpretation of
sonar data. See your Installation Guide for suggestions on
adjusting the transducer position.
Electrical noise from the boat’s engine may be interfering
with sonar reception. See Finding the Cause of Noise for
more information.
Sonar readings may be affected if the transducer is not
positioned correctly (i.e. mounted at an angle, not
straight down), or there is some kind of mechanical
interference, either because it is mounted inside a hull
that is too thick for proper sonar transmission, the bond
between the transducer and the hull is not airtight, or
because the transducer is dirty. Check with your
Installation Guide for guidance on re-positioning the
transducer, and make sure the transducer is clean.
There are no fish
detected, even when
you know they are in
the water under the
boat, or sonar readings
seem weak or faulty.
Low battery voltage may be affecting the power of signal
transmission.
Electrical noise from the boat’s engine may be interfering
with sonar reception. See Finding the Cause of Noise for
more information.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 78
Finding the Cause of Noise
Electrical noise usually affects the display with many black dots at high speeds,
and high sensitivity readings. One or more of the following sources can cause
noise or interference:
Possible Source of Noise Isolation
Other electronic devices
Turn off any nearby electronic devices to see
if the problem goes away, then turn them on
one at a time to see if the noise re-appears.
The boat’s engine
To determine whether the boat’s engine is the
source of the noise, increase the RPMs while
the boat is in neutral and stationary to see if
the noise increases proportionately; if noise
appears when you rev the engine, the
problem could be the spark plugs, alternator,
or tachometer wiring. Replace the spark plugs
with resistor plugs, install an alternator filter,
or route the control head power and
transducer cables away from the engine
wiring.
Cavitation from the boat’s
propeller
Turbulence created by the propeller can cause
noise; make sure the transducer is mounted at
least 15” (38 cm) from the propeller, and that
the water flows smoothly over the face of the
transducer at all times.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 79
700 Series™ Fishing System Accessories
Accessories customize the 700 Series™ Fishing System to your needs and
enable you to stay on the edge of new technology. When an accessory is
connected to the 700 Series™ Fishing System, additional menus and readouts
are added automatically to the Main Menu System. Accessories available today
that are supported by your Fishing System include:
WideSide® transducer: purchase and connect the WideSide® transducer to
your 700 Series™ Fishing System to access specialized "side looking" functions
that are extremely useful for bank fishing or looking for bait fish in open water.
QuadraBeam PLUS™ transducer: purchase and connect the QuadraBeam
PLUS™ transducer to your 700 Series™ Fishing System to access specialized
QuadraBeam PLUS™ functions such as two 45° fan-shaped 35° 455 kHz Side
Structure locating sonar beams to spot fish, bait and structure to the left and
right of the boat over an area of the bottom that’s always equal to twice your
depth, for a continuous 90° of uninterrupted side to side coverage to 160 feet.
Temperature/Speed: purchase and plug in the Temperature/Speed accessory to
your 700 Series™ control head to get real time speed and temperature
readouts, as well as a valuable Triplog function.
NOTE: If an external Temperature/Speed (TS-W) or Temperature (TG-W) accessory is
connected AND a transducer with temperature built in is connected at the same time, the
TS-W or TG-W accessory will override the temperature which is built in to the transducer.
WeatherSense® Fishing Condition Monitor: purchase and plug in the
WeatherSense® accessory to your 700 Series™ Fishing System to obtain
barometric pressure readouts and trend data in real time.
GR4 GPS Receivers: purchase and connect the GR4 GPS Receiver to your 700
Series™ Fishing System to access advanced FishingGPS™, trackplotter and
navigation capabilities built-in to your Fishing System.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 80
GPS Connection Cable: purchase the GPS Connection Cable in order to
connect a handheld or other NMEA* GPS-compatible device that you may
already own to your 700 Series™ Fishing System.
*NMEA 0183 is a National Marine Electronics Association standard for data communication.
Wireless Sonar Link (WSL) purchase the Wireless Sonar Link (WSL) accessory
to receive remote sonar signals from a SmartCast® Remote Sonar Sensor (RSS).
Radio signals from the RSS are received by the WSL and transmitted over the
Accessory Bus to the 700 Series™ Fishing System.
PC Connect Cable: Purchase the PC Connect Cable to connect the 700 Series™
Fishing System to a PC in order to upload product software updates and new
MSWindows-compatible HumminbirdPC™ software downloaded from our
website to your PC in order to communicate with the 700 Series™ Fishing System.
Universal Sonar 2: Your 700 Series™ Fishing System supports Universal Sonar
2, a state-of-the-art, integrated and protected transducer that is built into the
lower unit of Minnkota trolling motors. With Universal Sonar 2, all wiring is
concealed inside the indestructible composite shaft—out of sight and out of
harm’s way, with no clamps, ties, or exposed wires. Universal Sonar 2 features
new temperature sensing and the performance of DualBeam PLUS™
technology (available with all Humminbird® DualBeam PLUS™ models). An
expanded view and greater bottom detail gives you a totally new perspective of
the water below, along with optimal sonar performance to help you find fish.
Downriggers are the key to catching fish you otherwise couldn’t even touch. And
now Humminbird’s CannonLink™ Downrigger Controller makes operation of up
to six Cannon™ Mag 20 DT or Mag 20 DT/HS downriggers incredibly easy. Using
the controls on your Fishing System, deploy or retrieve downriggers, hold a
specific distance off the bottom, cycle downriggers between two depths, and
adjust the Positive Ion Control. Even see temperature and water clarity at depth
and speed at the ball right on-screen when using the Cannon™ Speed-n-Temp.
You’ll never be shorthanded again, just make adjustments from the helm, while
your mate rigs the lines and brings in the fish!
75
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 81
With the new InterLink™ Network Connection, you can now share GPS
position, waypoints, routes and your current track between two Humminbird
Fishing Systems in real time. Mark a waypoint at the console, and it’s instantly
available on the second unit. No matter where you’re at on the boat, you’ll have
access to your critical fishing and navigation information. Plus, daisy chain
InterLink with other System Modules and you’ll have a network that lets you
share digital data around the boat. It’s a simply, clearly, better networking
solution!
exciting accessories to grow your 700 Series™ Fishing System!
NOTE: Each accessory requires a separate purchase. You can visit our website at
additional details.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 82
Specifications
Depth Capability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500 ft (450 m)
Power Output . . . . . . . . . . . . 500 Watts (RMS), 4000 Watts (Peak to Peak)
Operating Frequency . . . . . . . . . . . 200 kHz and 83 kHz DualBeam PLUS™
Area of Coverage. . . . . . . . . . . . . . . . . . . . . . . . . . . 60° @ -10 dB in 83 kHz
20° @ -10 dB in 200 kHz
Target Separation. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ½ Inches (63.5 mm)
Power Requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-20 VDC
LCD Matrix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320 V x 240 H (747c)
640 V x 480 H (777c2)
Transducer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XHS-9-20-T
Transducer Cable Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 ft (6 m)
Current Draw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 650 mA (747c)
700 mA (777c2)
NOTE: Humminbird® verifies maximum stated depth in saltwater conditions, but actual depth
performance may vary due to transducer installation, water type, thermal layers, bottom
composition and slope.
NOTE: Product specifications and features are subject to change without notice.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 83
POLICY ON ENVIRONMENTAL COMPLIANCE: It is the intention of Humminbird® to be
a good corporate citizen and comply and meet all known and applicable environmental
regulations in the areas and countries where our products are sold. We will promote and
implement environmentally sound processes in support of national and international
regulations.
ROHS STATEMENT: Product designed and intended as a fixed installation or part of a system
in a vessel may be considered beyond the scope of Directive 2002/95/EC of the European
Parliament and of the Council of 27 January 2003 on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
WEEE STATEMENT: Product designed and intended as a fixed installation or part of a
system in a vessel may be considered beyond the scope of Directive 2002/96/EC of the
European Parliament and of the Council of 27 January 2003 on waste electrical and electronic
equipment (WEEE).
CALIFORNIA PROPOSITION 65 STATEMENT: Lead in cable jackets and boots is restricted
to 300 parts per million or less as determined by ICP-AES test methods.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 84
Glossary
Sonar Terms:
Alarm, Depth: Depth Alarm is a user-controllable, audible alert that sounds
when depth is less than or equal to the setting.
Alarm, Temperature: Temperature Alarm is a user-controllable, audible alert
that sounds when the water surface temperature equals the setting.
Backlight: Backlight is a user-controllable illumination for the LCD for night and
low light use.
Beam (Sonar Beam): A sonar beam is the wide, cone-shaped projection of
sound waves formed as sound travels underwater. See Cone Angle.
Big Digits View: Big Digits View is a Humminbird® feature that displays the sonar
graph and enlarged digital readouts for easy reading from a distance. This is a
great tool when monitoring the digital depth is important - such as with higher
boat speeds, or when viewing the unit from a distance. When speed input is
available, the Big Digits View also shows the TripLog. See TripLog.
Bottom Black: Bottom Black is a Humminbird® feature that "fills in" the area of
the display below the bottom contour. Bottom Black is preferred by some
anglers because of its high contrast and easy readability, even though it can
obscure bottom hardness information.
Bottom Contour: Bottom Contour is the profile of the bottom graphed to the
display as the depth changes.
Bottom Hardness: Bottom Hardness is the density (or composition) of the
bottom, which can often be determined by interpreting the main sonar return.
Varying levels of hardness can be determined by interpreting the "thickness" of
the sonar return. Hard returns appear thin and black, softer returns appear
thicker and less black. It is important to note that a sonar return from a sloping
bottom can have the appearance of a softer bottom.
Cavitation: Cavitation is the effect of air bubbles created as the propeller
rotates and the boat moves through the water.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 85
Chart Speed: Chart Speed is a user-controllable feature that sets the speed at
which sonar information moves across the display. A faster setting displays
sonar information from more pings and shows more detail, but the information
moves quickly across the display: a slower setting permits viewing of more
sonar history, but does not display as much detail. The best setting is often the
user's personal choice.
Cone Angle: The cone angle is the angular measurement of the sonar beam at
a specific dB down point (i.e. -10 dB). See dB Down Point.
Customizable Digital Readouts: Customizable Digital Readouts is a
Humminbird® feature that permits the user to select the specific digital
information that appears in the main Sonar view (i.e. Speed, Temperature,
Barometric Pressure, TripLog, etc.)
Dead Zone: The dead zone is the area of the sonar beam that receives the sonar
signal after the main bottom return. Fish and other objects close to the bottom
that fall within the dead zone will probably not be visible in the sonar beam.
Precision sonar beams, such as the Humminbird® 20° beam, have a smaller
dead zone than wider sonar beams.
Decibel: A Decibel is the measurement for sound pressure level, or "intensity"
of the sonar return. See dB Down Point.
dB Down Point: The dB Down Point is the standard decibel level at which the
sonar cone angle is measured, and is written as "@ -10 dB" or "@ -3 dB".
Measurements at smaller down points (bigger negative numbers) indicate that
the less intensive sonar signals are being used for the measurement.
Display, FSTN: FSTN is an acronym for Film Super-Twist Nematic. FSTN is a
monochrome display technology characterized by black, high-contrast pixels.
All monochrome fixed mount Humminbird® products use FSTN technology.
DualBeam PLUS™: DualBeam PLUS™ is a Humminbird® sonar configuration
that uses two sonar beams simultaneously, and combines the information from
both beams into one view by overlapping the data on-screen, or shows each
beam individually side by side, or permits each beam to be viewed individually
full screen.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 86
Feature Memory: Feature Memory is a Humminbird® feature that retains the
user's menu settings in permanent memory. Settings are retained even when the
unit is powered off indefinitely.
Fish Arch: A Fish Arch is the apparent "arch" that appears on the display when
any object moves through the sonar cone. The arch results from a gradual
decrease in distance to an object as it moves into the sonar cone. The distance to
an object changes due to the conical shape of the sonar beam, which causes the
distance to be greater at the edges of the beam than at the center of the beam.
When this distance change is graphed on the display, an arch appears.
Fish ID+™: Fish ID+™ is a Humminbird® feature that uses advanced sonar
processing algorithms to determine if a detected object is likely to be a fish. When
the sonar signal from an object meets strict parameters, the unit draws a Fish
Symbol (or icon) and the digital depth of the target. On DualBeam and DualBeam
PLUS™ units, fish detected in the narrow center beam are shown as shaded
symbols, and fish detected in the wider beam are shown as hollow symbols.
Fish Symbol: A Fish Symbol is the graphic that is displayed on the screen when
Fish ID+ determines that a sonar return is likely to be a fish. See Fish ID+.
Freeze Frame: Freeze Frame is a Humminbird® feature that pauses the sonar
scrolling so that the image on screen can be studied with greater detail. See
Instant Image Update.
Frequency: Frequency is a measure of the number of sound wave cycles per
second of a sound impulse transmitted underwater. A typical frequency for
fishfinders is 200 kHz, which offers a good balance of performance under many
conditions. Lower frequencies, such as 50 kHz, are capable of penetrating to
greater depths, but with less resolution. Higher frequencies, such as 455 kHz, offer
greater resolution, but are limited in depth performance. Humminbird® uses a
variety of frequencies that are optimized for specific applications.
Grayscale: Grayscale is the use of varying shades of gray to represent the
strength of the sonar signal on the display , and is a very intuitive method of
presenting information. Traditionally, the strongest sonar signals are
represented in black, and progressively weaker signals are represented in
progressively lighter shades of gray.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 87
Grayscale, Inverse: Inverse Grayscale is a Humminbird® feature that reverses the
correlation of sonar signal strength and the shade of gray typically used to
represent it. The strongest sonar signals are represented by "white", and
progressively weaker signals are represented in progressively darker shades of
gray. While somewhat counter-intuitive, this method makes the sonar images
crisper, and has the benefit of enhancing the apparent sensitivity because the
weaker signals appear bolder. Inverse grayscale works well in very clear water.
Debris-laden water often appears as a lot of clutter on the screen.
Instant Image Update: Instant Image Update is a Humminbird® feature that
updates all the sonar information on the display when Sensitivity and a variety of
sonar settings (Bottom View, Range, etc.) are modified. This differs from the
traditional functionality that only updates the new sonar information collected
after the setting change. Instant Image Update permits more accurate fine-tuning
of the display because the user can see the results on the complete sonar graph.
When combined with the Freeze Frame feature, the user can adjust and
understand the effects of many different sonar settings quickly and easily.
Maximum Depth Menu: The Maximum Depth Menu is a Humminbird® feature
that optimizes performance based on the maximum operational depth set by the
user. Many Humminbird® units can operate across a very broad depth range (up
to 2500 feet) which causes the unit to "look" up to that full depth under some
circumstances. Due to the speed of sound in water, this can result in less
responsiveness because the unit has to wait for a longer period of time to receive
the sonar signal. When the Maximum Depth menu is set to a lower value, the unit
only looks up to the setting, which increases the responsiveness of the unit. This
is an important feature for anyone operating in shallower depths!
Noise: Noise is unintentional, external sound waves that interfere with the optimal
operation of sonar. Noise appears as random "dots" on the display, and is caused
by a variety of sources. Electrical noise (from trolling motors, bilge pumps, VHF
radios) typically manifests as a consistent dot pattern. Electrical noise can be
isolated by selectively turning on and off other electrical devices to determine the
source. Often re-routing the power cable, or connecting to an alternative power
supply (second battery) can help overcome electrical noise. Hydrodynamic noise
(from propeller and/or hull cavitation) has a more random appearance and is
generally related to boat speed, so that faster operation results in more noise.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 88
Hydrodynamic noise can be overcome by proper transducer installation. Many
Humminbird® products have a Noise Filter menu setting that allows the user to
clear the screen of noise that is difficult to eliminate.
Pixels: Pixels are the "picture elements", or small square blocks, that make
up the image on the LCD. Measured as a vertical by horizontal number
(i.e. 640V x 320H), this key specification typically indicates the quality of
resolution. In fishfinders, the total resolution (vertical multiplied by horizontal)
is often less important than the "Vertical Pixel" resolution. See Pixels, Vertical.
Pixels, Vertical: Vertical Pixels are a number of vertical picture elements in a
single column on an LCD display. A greater number of vertical pixels provide finer
resolution of targets detected by sonar. Essentially, a vertical distance (the depth),
when divided by a larger number, breaks that distance into smaller samples, each
representing a smaller area and thus providing more detail. In fishfinders, vertical
pixels are more critical than horizontal pixels because the horizontal axis of the
display represents time, or history. Sonar information on the horizontal axis can
vary greatly, depending on boat speed and the Chart Speed setting. A greater
number of horizontal pixels show more sonar history that the boat has passed
through. On many models, Humminbird® provides the most vertical pixels to
provide a better display resolution. See Chart Speed and Pixels.
Power Output: Power output is the amount of sound energy emitted into the
water by the sonar transmitter. Power output is measured using either RMS (Root
Mean Square) or P-T-P (Peak-to-Peak) measurement systems. Either method is
acceptable, but it is important, when comparing power outputs, to make sure that
the same measurement system is being used for both outputs, because P-T-P
numbers are 8 times higher than RMS numbers. Greater power output allows the
sonar signal to penetrate through weeds and thermoclines, reach deeper depths
and operate more effectively in noisy environments, such as when the boat is
running at high speed.
Pulse Width (Pulse Length): Pulse Width is the length of time that a sonar sound
burst is transmitted into the water. Shorter pulse widths provide better target
separation, but cannot travel to great depths. Longer pulse widths provide better
depth penetration, but result in poorer target separation. Humminbird® varies
pulse width based on depth to optimize both target separation and depth
performance. See Target Separation.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 89
QuadraBeam PLUS™: QuadraBeam PLUS™ is a Humminbird® sonar
configuration that uses four sonar beams for a more detailed bottom image.
QuadraBeam PLUS™ uses the DualBeam PLUS™ configuration for
downlooking, and also adds two additional beams to look to the left and
right. The sonar beams pointing to the left and right provide the ability to
spot fish and structure over a wide 90° area, and to identify on which side of
the boat they are located. See DualBeam PLUS™.
Quick Disconnect Mount: The Quick Disconnect Mounting system is an
exclusive Humminbird® feature that permits the unit to be easily removed from
the mounting base by pressing a release button, and re-installed by simply
snapping it back into place. All cable connections are made when installing, so
that no separate wiring connections are required. Additionally, the mount
offers 90° tilt and 360° swivel capability to adjust the viewing angle of the unit
as you move about the boat.
Real Time Sonar: Real Time Sonar is a Humminbird® technology that delivers
ultra-fast sonar transmitter/receiver operation and results in a more detailed
instantaneous view of what is under the boat. The Real Time Sonar window
is a vertical band at the right side of the display that shows the
instantaneous sonar return from the transducer at a particular instant. The
RTS® Window menu option permits the user to adjust the window to show
the full sonar signal return, or just a narrower band that indicates intensity
using grayscale. Real Time Sonar relies on very fast Sonar Update Rate (Ping
Speed). See Sonar Update Rate.
Receiver: See Transmitter.
Second Return: The Second Return is a term that describes the appearance of
a second sonar return below the primary sonar return (bottom contour) at
exactly twice the true depth. The second return is caused by the same sonar
energy bouncing off the bottom once, rebounding to the water surface and
then traveling back down to the bottom to be reflected again. Second returns
are more common in shallow water and over hard bottoms; it is actually
possible to see a third sonar return under some circumstances. The second
return provides useful information to help determine bottom hardness, as
areas with harder bottoms will generally create a second return. The second
return can be used as a guide to set Sensitivity when in shallower water.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 90
Sensitivity: Sensitivity is a user feature that adjusts the sensitivity of the sonar
system to show more or less detail in the water. Higher sensitivities are often
preferred, however, when the water contains debris (silt, storm debris, etc.) and it
can be difficult to pick out targets. Conversely, if sensitivity is set too low, relevant
targets may be missed.
SONAR: SONAR is the acronym for SOund and NAvigation Ranging. Sonar
technology uses precision sound bursts transmitted underwater to determine the
distance and other attributes of objects in the water. Distance can be determined
because the speed of sound in water is constant, and the time for the signal to
return is measured. Sound also travels very quickly underwater, making sonar a
responsive, cost-effective tool. Sonar is the basic technology behind all
recreational and commercial fishfinding and depthfinding devices.
Sonar Echo Enhancement: Sonar Echo Enhancement is a Humminbird® feature that
describes the high degree of sonar sensitivity achieved through a combination of
transmitter/receiver and software algorithms. The result of Sonar Echo Enhancement
is to display virtually everything in the water that is of interest to the angler, including
bait fish, game fish, thermoclines, weed beds, subtle structure, and more.
Sonar Update Rate: Sonar Update Rate is the number of times per second that
the transmitter/receiver sends and receives sonar signals. A very fast sonar update
rate collects more information and provides a more detailed image of the bottom,
fish and structure. Many Humminbird® units operate at up to 40 times per second
when in single frequency operation. Due to the limitation of the speed of sound in
water, the update rate begins to slow as depth increases to deeper than 50 feet.
In very shallow water (less than 10 feet), however, update rates as much as 60
times per second can be achieved.
Speed: Speed is the rate at which the boat moves through the water. Boat speed
can be measured as Speed Over Ground or Speed Through Water. Speed Over
Ground is provided by GPS, and is the measurement of the boats progress across
a given distance. Speed Through Water is provided by a speed paddlewheel, and
is the measurement of the flow past the boat, which may vary depending on
current speed and direction. Speed Through Water is most critical for anglers
using downriggers, as it impacts the running depth of the down riggers. Speed
Over Ground is optimal for navigation, as accurate destination times can be
derived from this measurement. Humminbird® products allow for input and
display of both sources.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 91
Structure: Structure is a general term for objects on the bottom that present a
discontinuity and are a likely attractor for fish. This includes bottom contour
features (drop-offs, humps, and holes), standing structure (stumps, timbers, brush
piles) and a wide range of other potential objects (sunken boats, reefs).
Humminbird® units excel at showing structure with great detail over a wider area
due to unique sonar configurations developed for the angler.
Structure ID®: Structure ID® is a Humminbird® feature that describes the
traditional grayscale method of presenting sonar information. See Grayscale.
Surface Clutter: Surface Clutter is a phenomenon where sonar returns are
reflected off of tiny objects near the surface of the water, including algae and even
air bubbles. Typically, saltwater environments have significantly greater surface
clutter than freshwater due to continuous wind and wave action that causes
aeration at the surface. The Surface Clutter menu provides manual control to bias
the default settings under extreme conditions.
Target Separation: Target Separation is the measurement of minimum distance that
a fishfinder needs to be able to recognize two very close objects as two distinct
targets (i.e. two fish hanging very close, or a fish hanging very close to structure).
Humminbird® fishfinders provide a very good 2 1/2 inches of target separation in
shallower than 100 feet of depth. Target separation decreases as depth increases
due to the need for longer Pulse Width to achieve greater depth. See Pulse Width.
Thermoclines: Thermoclines are water layer(s) of distinctly different temperatures
that create a sonar reflection due to the density of the differing water
temperatures. Typically a thermocline will appear as a continuous band across the
display at some distance above the bottom contour. Thermoclines are of interest
to anglers because fish will suspend above or below the thermocline as they seek
the optimum temperature and oxygen levels.
Time Variable Gain: Time Variable Gain is a processing step applied to the sonar
return to "normalize" the data so that objects of equal size (i.e. fish) appear to be
the same size, even if they are separated by a good distance. Time Variable Gain
is a fundamental attribute of good sonar, but is often promoted as a feature.
Total Screen Update®: A Humminbird® feature that refreshes and updates all the
sonar information on the display when a range change occurs. Without Total
Screen Update®, only the most recent sonar information would be drawn to the
86
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 92
new range, and the old sonar information would continue to scroll off the screen
at the old range.
Transducer: The transducer is part of the sonar system, which mounts on the
boat and is in contact with the water, that converts the electrical energy from
the transmitter into sound energy, and that forms the sonar beam in turn.
Internally, the transducer consists of one or more piezo electric disks that
expand by very minute amounts to create the sound wave. This element also
works in reverse, converting the returned sound energy back into an electrical
signal that the receiver interprets. Transducers are available for many specific
mounting applications for the boat, such as a transom mount, trolling motor
mount, etc. Humminbird® offers many sophisticated transducers, often with
multiple piezo electric elements designed to form specifically-shaped sonar
beams, providing the angler with superior tools for finding and catching fish.
See Transmitter and SONAR.
Transmitter: The transmitter and receiver are matched parts of the sonar system
that send (transmit) and listen to (receive) the sonar signals, and work in
conjunction with the transducer. Humminbird® transmitters have an extremely fast
cycling design that can send signals up to 60 times per second, as well as produce
the varying levels of power output needed for different depths and conditions.
Additionally, the transmitter has the capability to create very precise sonar pulses
needed for a high degree of target separation. Humminbird® receivers are
extremely sensitive, but within a narrow "bandwidth" to discriminate against
noise from external sources. Additionally, the receiver offers a wide "dynamic
range" which provides the ability to receive very strong signals alternating with
very weak signals, without the strong signal overwhelming the weak signal.
See Transducer and Noise.
TripLog: TripLog is a Humminbird® feature that provides an on-screen counter for
Elapsed Time, Average Speed and Total Distance traveled, and requires a speed
input to activate the feature. TripLog appears on the Big Digits View, and can be
reset to zero through the TripLog menu.
TrueArch®: TrueArch® is a Humminbird® feature that provides true fish arches, not
artificial arches or symbols. Humminbird® units are capable of producing fish
arches due to the wide 60° sonar beam of DualBeam PLUS™, an extremely
sensitive sonar receiver. See Fish Arch.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 93
Viewing Angle: Viewing Angle is an attribute of an LCD that characterizes visibility
of the display when viewing from off the central access, such as when standing
to the side of the fishfinder. Wider viewing angles are better because the
information remains visible even when viewing from the side.
WhiteLine®: WhiteLine® is a Humminbird® feature that highlights the
strongest sonar return on the display using a very light gray band. This is
preferred by some anglers who have grown accustomed to the feature on
paper graph chart recorders.
WideSide®: WideSide® is a Humminbird® sonar configuration used in an optional
transducer. WideSide® uses three sonar beams pointing to the left, right and
down. Beams pointing to the left and right are effective for spotting fish and
structure near the surface or on the bank. The downlooking beam provides depth
information directly below the boat.
X-Press™ Menu: X-Press™ Menus are a Humminbird® feature that make the
most commonly-used menu selections available with one press of the MENU key.
Items that appear on the X-Press™ Menu are related to the current view, and
present the most logical choices for that view. Sonar View X-Press™ menus will
differ from Chart View X-Press™ menus, etc. X-Press™ menus are one of the
principal reasons that Humminbird® products are easier to use.
Zoom: Zoom is a feature that focuses in on a smaller area of the bottom to provide
enhanced resolution. With enhanced resolution, the angler can more easily see
fish hanging in structure or multiple fish hanging close together. Split screen zoom
divides the display into the full range view on the right, and the zoomed view on
the left. Humminbird® offers One-Touch® Zoom which allows the zoom feature to
be easily accessed from the regular sonar view with just one key press, eliminating
the need to use menus to access the feature.
Zoom, Bottom Lock: Bottom Lock Zoom is a feature that focuses on a smaller
area just above the bottom to provide enhanced resolution. Unlike regular
zoom, it continuously graphs the bottom at a constant point on the display
regardless of changes in depth. This "flattens" out the bottom contour, but is
effective at showing fish on or near the bottom, and is preferred by many
saltwater anglers.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 94
Notes
89
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 95
Notes
90
Download from Www.Somanuals.com. All Manuals Search And Download.
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 96
Contact Humminbird®
Contact the Humminbird® Customer Resource Center
in any of the following ways:
By Telephone:
(Monday - Friday 8:00 a.m. to 4:30 p.m. Central Standard Time):
1-800-633-1468
By e-mail:
(typically we respond to your e-mail within three business days):
For direct shipping, our address is:
Humminbird
Service Department
678 Humminbird Lane
Eufaula, AL 36027 USA
91
Download from Www.Somanuals.com. All Manuals Search And Download.
|