Humax TV Receiver F2 1010T User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Notice  
**  
Read this manual carefully and make sure you understand the provided instructions. For your safety,  
know what the reaction upon each action will be.  
**  
Warnings, Cautions and Notes  
Throughout the whole manual, pay special attention to the following marks that indicate hazardous  
situations.  
**  
•
•
•
Warning  
**  
Indicates a hazardous situation which, if not avoided, could result in (serious) injury.  
**  
Caution  
**  
Indicates a situation which, if not avoided, could damage the equipment or other apparatus.  
**  
Note  
**  
Indicates additional information to the user to make the user aware of possible problems and  
information of any importance to help the user to understand, to use and to maintain the  
installation.  
**  
To reduce the risk of electric shock, do not remove cover (or back). No user  
serviceable parts inside. Refer servicing to qualified service personnel.  
**  
**  
**  
**  
This symbol indicates dangerous voltage inside the product that presents a risk  
of electric shock or personal injury.  
This symbol indicates important instructions accompanying the product.  
**  
**  
**  
**  
GB 2  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Safety and Warning  
**  
This digital terrestrial receiver has been manufactured to satisfy international safety standards.  
Please read the following safety precautions carefully.  
**  
Safety Instructions and Precautions  
**  
1. MAINS SUPPLY  
**  
AC 100 ~ 240V 50/60Hz Max 1.0A  
Operate this product only from the type of power supply indicated on the marking label. If you  
are not sure of the type of power supplied to your home, consult your local power company.  
Disconnect the product from the mains before you start any maintenance or installation  
procedures.  
**  
2. OVERLOADING  
**  
Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or  
shock.  
**  
3. LIQUIDS  
**  
The receiver should not be exposed to any liquids such as dripping or splashing. In addition,  
no objects filled with liquids, such as vase, shall be placed on the apparatus.  
**  
4. CLEANING  
**  
Disconnect the receiver from the wall outlet before cleaning.  
Use a light damp cloth (no solvents) to dust the receiver.  
**  
**  
**  
5. VENTILATION  
**  
The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. Do  
not stand the receiver on soft furnishings or carpets. Do not stack electronic equipments on  
top of the receiver.  
**  
6. ATTACHMENTS  
**  
Do not use any unsupported attachments as these may be hazardous or cause damage the  
receiver.  
**  
7. CONNECTION TO THE AERIAL  
**  
Disconnect the receiver from the mains before connecting or disconnecting the cable from the  
aerial. Failure to do so can damage the aerial.  
**  
8. CONNECTION TO THE TV  
**  
Disconnect the receiver from the mains before connecting or disconnecting the cable from the  
aerial. Failure to do so can damage the TV.  
**  
9. EARTHING  
**  
The aerial cable must be buried in the ground.  
The buried cable of the system must comply with SABS 061.  
**  
**  
**  
**  
**  
GB 3  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Safety and Warning  
**  
10.LOCATION  
**  
Place the receiver indoors to avoid exposing it to lightening, rain or sun.  
Do not place it near a radiator or heat register.  
Make sure it has more than 10 cm clearance from any appliances susceptible to  
electromagnetic influences, such as TV and VCR.  
Do not block these openings with any object, and do not place the product on a bed, sofa, rug  
or other similar surface.  
If you place the product on a rack or bookcase, ensure that there is adequate ventilation and  
that you have followed the manufacturer's instructions for mounting.  
Do not place the product on an unstable cart, stand, tripod, bracket or table where it can fall. A  
falling product can cause serious injury to a child or adult, and serious damage to the  
appliance.  
**  
11.LIGHTNING, STORM or NOT IN USE  
**  
Unplug the product from the wall outlet and disconnect the aerial during a lightning storm or  
when left unattended and unused for long periods of time. This will prevent damage to the unit  
due to lightning and power-line surges.  
**  
12.EXTRANEOUS OBJECTS  
**  
Do not insert anything through the openings in the unit, where they can touch dangerous  
voltage point or damage parts.  
**  
13.REPLACEMENT of PARTS  
**  
When the replacement parts are required, be sure the service technician uses replacement  
parts specified by the manufacturer or those that have the same characteristics as the original  
**  
**  
part. Unauthorised substitutions may result in additional damage to the unit.  
**  
**  
Warning  
**  
1. Follow these directions in order not to damage the power cord or plug.  
Do not modify or process the power cord or plug arbitrarily.  
Do not bend or twist the power cord too much.  
Make sure to disconnect the power cord with the plug held.  
Keep heating appliances as far as possible from the power cord in order to prevent the cover  
vinyl from melting.  
2. Follow these directions. Failure to follow one of them may cause electrical shock.  
Do not open the main body.  
Do not insert metals or inflammable objects inside the product.  
Do not touch the power plug with a wet hand.  
Disconnect the power cord in case of lightening.  
3. Do not use the product when it is out of order. If you continue to use the product when  
defective, serious damage can be caused toit. Make sure to contact your local product  
distributor if the product is out of order.  
**  
**  
**  
**  
GB 4  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Contents  
**  
1. Before Using the Receiver  
GB7  
**  
1.1 Package Contents  
1.2 Front Panel  
GB7  
GB8  
1.3 Rear Panel  
GB9  
1.4 Remote Control  
GB10  
GB12  
2. Connecting  
**  
2.1 Connecting Aerial  
2.2 Powering On  
GB12  
GB14  
GB15  
3. Setup  
**  
3.1 Selecting a Language  
3.2 Language Setting  
3.3 Service Searching  
GB15  
GB15  
GB16  
GB18  
4. Basic Operation  
4.1 Switching Channel  
**  
GB18  
GB18  
GB18  
GB18  
GB19  
GB19  
GB19  
GB21  
GB23  
4.2 Volume Control  
4.3 Motion Still  
**  
**  
4.4 Change the Subtitle Language  
4.5 Change a Audio Language  
4.6 Teletext  
4.7 Programme Information (I- plate)  
4.8 Service Configuration  
5. Channel List  
**  
5.1 Selecting the Simple or Advanced Service List  
5.2 Changing Service List Group  
5.3 Organising All Services  
GB23  
GB24  
GB24  
GB26  
GB27  
GB28  
5.4 Organising Favourite Groups  
5.5 Organising Networks  
6. TV Guide  
**  
6.1 Viewing Programme Guide Information  
6.2 Reserving a Programme  
GB28  
GB30  
**  
**  
**  
**  
GB 5  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Contents  
**  
7. Parental Control  
7.1 Parental Control  
8. Installation  
8.1 System Setting  
8.2 Service Searching  
9. Software Update  
9.1 OTA (Over the Air)  
9.2 Software Upgrade from PC  
10. System Information  
GB32  
**  
GB32  
GB33  
**  
GB33  
GB37  
GB40  
**  
GB40  
GB42  
GB43  
**  
10.1 Status  
GB43  
GB44  
GB45  
GB53  
GB54  
10.2 Utility  
11. Manipulating your TV using Remote Control  
12. Menu Map  
13. Trouble Shooting  
**  
13.1 Trouble Shooting  
13.2 Error Message  
14. Specification  
GB54  
GB55  
GB56  
GB58  
GB59  
**  
**  
15. Glossary  
16. Service and Support  
**  
**  
**  
**  
GB 6  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
1.Before Using the Receiver  
**  
This chapter describes detail instructions on the product and its accessories.  
1.1 Package Contents  
Please check all package contents before using your receiver.  
**  
**  
**  
**  
Remote Control (1)  
User's Manual (1)  
**  
Batteries (2)  
RF Cable (1)  
Adaptor (1)  
**  
Note:  
•
Since faults may occur if the remote controller is being left without a battery for a long time,  
always keep the battery inserted in the remote controller.  
•
Package Contents can be changeable according to the area.  
**  
**  
**  
**  
GB 7  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
1. Before Using the Receive  
**  
1.2 Front Panel  
**  
1. STANDBY LED  
**  
Red light is displayed when the product is in the standby mode.  
Green light is displayed when the product is in operation.  
2. CH- / CH +  
**  
Moves the TV/Radio service up / down.  
3. STANDBY Button  
**  
Switches between operation and standby modes.  
**  
**  
**  
**  
**  
**  
GB 8  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1.3 Rear Panel  
**  
1. ANTENNA IN  
**  
Connects a aerial to a ANTENNA input jack on the your receiver.  
**  
2. TV / VCR  
**  
Connects a RF signal from your receiver to RF(ANT) input jack on your TV or VCR.  
**  
3. RS-232 C  
**  
Connects to your PC to upgrade product’s software programme.  
**  
**  
4. AUDIO L/R  
**  
Connects to your TV or VCR and output Audio signals.  
5. VIDEO  
**  
Connects to your TV or VCR and output Video signals.  
**  
**  
**  
**  
GB 9  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
1. Before Using the Receiver  
**  
1.4 Remote Control  
**  
**  
**  
**  
**  
**  
**  
GB 10  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1. DTV  
13.? (HELP)  
**  
**  
Turn on the DTV.  
Display the help box on the screen.  
**  
**  
2. TV  
14.STANDBY  
**  
**  
Turn on the TV.  
Switches between Operation and  
**  
Standby modes.  
**  
3. NUMERICAL BUTTONS  
**  
15.GUIDE  
Enters a TV/Radio service number or  
**  
menu option number.  
Displays the Programme Guide.  
**  
**  
4. MENU  
16.EXIT  
**  
**  
Displays the main menu in DTV.  
Returns to the previous menu and screen  
**  
**  
5. TIME (WHITE)  
17.OK  
**  
**  
Display the current time on the  
screen.Reserve services in the  
Selects a menu or confirms the selected  
operation. And displays the service list  
information box or EPG.  
during watching a programme.  
**  
**  
6. ARROW BUTTONS  
18.ZOOM (BLUE)  
**  
**  
Changes the service or move the cursor  
Enlarge the picture.  
**  
to the up, down, left or right menu option.  
**  
19.SUBTITLE (YELLOW)  
**  
7. INFORMATION (RED)  
Changes the subtitle language.  
**  
**  
**  
**  
Displays the information about the  
20.V - / V +  
service and programme.  
**  
**  
Adjusts the audio volume of TV.  
**  
8. SOUNDTRACK (GREEN)  
**  
21.MUTE  
Displays the Soundtrack.  
**  
**  
Pauses the audio temporarily. That is,  
9. CH - / +  
volumes on/off temporarily.  
**  
**  
Changes the Service.  
**  
22.FREEZE  
**  
10.RECALL  
Freezes the TV screen you are watching.  
**  
Returns to the previous channel.  
Play the audio continuously.  
**  
**  
11.WIDE  
23.AUX  
**  
**  
Change the display format.  
Controls input mode of TV.  
**  
**  
12.TV/RADIO  
24.UHF  
**  
**  
Switches between TV and Radio modes.  
Set the UHF menu.  
**  
**  
**  
**  
**  
**  
GB 11  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
2. Connecting  
**  
This chapter describes how to set up the receiver. Select the most appropriate procedure depending  
on your case.  
Note: If you encounter any problem when setting up the receiver, please contact your local  
product distributor.  
2.1 Connecting Aerial  
1. Connecting TV and VCR  
Connect the cable of your TV aerial to the ANTENNA IN connector on the rear of the receiver.  
Co-axial cable is connected as in the figure above.  
**  
**  
**  
**  
**  
**  
**  
GB 12  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2. Connecting Hi-Fi system 1  
**  
**  
**  
**  
**  
**  
**  
GB 13  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
2. Connecting  
**  
2.2 Powering On  
1. Connect an adapter to a power input jack. Then, connect a plug of the adapter to a wall outlet.  
**  
**  
2. Power on by pressing the STANDBY  
button at Remote Controller or the STANDBY  
button at the front of the receiver.  
**  
**  
**  
**  
**  
**  
**  
GB 14  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
3. Setup  
**  
Please setup the language, and search for services when you use your receiver for the first time  
after purchase. Once the service setting has been completed, you can skip Chapter 3.  
3.1 Selecting a Language  
You can select the language before you use the receiver.  
Select your desired language using the  
the OK button.  
button and press  
3.2 Language Setting  
You can set Language for Menu, Audio, and Subtitle.  
1. Press the MENU button.  
2. Select Installation using the  
OK button.  
3. Select System Setting using the  
the OK button.  
4. Select Language Setting using the  
press the OK button.  
button and press the  
button and press  
button and  
**  
**  
**  
Menu, Audio, and Subtitle Language  
You can set the language for Menu, Audio, and Subtitle.  
1. Select Menu/Audio/Subtitle Language using the  
button.  
2. Press the  
button to display the available Language List.  
3. Select your desired language using the  
button and press the OK  
button.  
**  
**  
**  
**  
GB 15  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
3. Setup  
**  
3.3 Service Searching  
If your receiver is connected to the aerial and television, you can automatically or manually search  
services.  
1. Press the MENU  
2. Select Installation using the  
OK button.  
3. Select Service Searching using the  
press the OK button.  
button  
button and press the  
button and  
4. Enter a PIN code. The default PIN code is 0000.  
5. Select Automatic Search or Custom Search using the  
button and press the OK  
button  
1. Automatic Search  
If your receiver is connected to the aerial and television, you can automatically search services  
without entering any other information.  
1. Select Start Service or End Service using the  
button.  
**  
**  
2. Press the  
or NUMERICAL (0~9) button to input the  
start or end service number  
3. Press the OK  
button to start the search.  
2. Custom Search  
You can search services manually by searching parameters, if you know the service information.  
Select Channel, Frequency, Mode, Guard Interval or Network  
Search using the  
button and press the  
button.  
**  
**  
**  
**  
GB 16  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
•
Channel Number  
Select the number of VHF/UHF channel, in which the transport stream is transmitted by using  
also the NUMERICAL(0~9) button. If the number is correct, the receiver will search any  
services easily.  
**  
•
Frequency  
Enter the your desired frequency to search directly. When entering frequency, the appropriate  
service for the entered frequency is automatically displayed on Service. When you enter the  
frequency, you use the NUMERICAL(0~9) button.  
**  
•
•
•
Mode  
Select one option among Auto, 2K FFT and 8K FFT for service search. If you don't know the  
value, please select Auto.  
**  
Guard Interval  
Select one option among Auto, 1/4,1/8,1/16 and 1/32 for service search. If you don't know the  
value, please select Auto.  
**  
Network Search  
If specified frequency service information and other service information are provided together,  
the service, which belongs to other frequency service, is also searched.  
Select Yes to search all services in the network. If not, select No.  
**  
**  
**  
**  
**  
**  
GB 17  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Basic Operation  
**  
This chapter describes functions such as switching channel, volume control, and basic features for  
watching programmes.  
4.1 Switching Channel  
You can switch the current channel using one of the following methods.  
1. Press the CH-/CH+  
button.  
2. Enter your desired channel numeric using the NUMERICAL (0-9) buttons to move to the  
channel directly.  
3. Press the TV/RADIO  
4. Press the RECALL  
button to switch between TV channel and Radio channel.  
button ;to select the previous service.  
Note: You can switch service using the service list or programme guide. Please refer to  
Chapter 6 and 7 for more information.  
4.2 Volume Control  
1. Press the V-/V+  
2. Press the MUTE  
buttons to adjust the audio volume.  
button to stop the sound temporarily.  
Note:  
**  
**  
•
The mute function keeps enabled while you change the service.  
This function is only for TV. Refer to chapter 11 to set the TV.  
•
4.3 Motion Still  
Press the FREEZE  
Press theFREEZE  
button at remote control to pause the current programme.  
button again to continue the programme.  
4.4 Change the Subtitle Language  
If the current programme provides Subtitle information, you can select the language for the Subtitle.  
1. Press the SUBTITLE  
button to display the subtitle  
language list.  
2. Select your desired subtitle language using the  
button and press the OK  
button. Then the subtitle will  
be displayed in the selected language at the bottom of the  
screen.  
3. Press the EXIT  
from the subtitle language list not to  
display subtitle from the screen.  
**  
**  
**  
**  
GB 18  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
4.5 Change a Audio Language  
If the current programme is available in multiple audio languages, you can select the language that  
you wish to listen in.  
1. Press the SOUNDTRACK  
button to display  
soundtrack list.  
2. Select your desired audio language using the  
OK button to change Audio immediately.  
and  
3. Select Audio Direction(left, right, stereo) using the  
button.  
4. Press the EXIT  
or OK  
button to exit the  
soundtrack list.  
4.6 Teletext  
Use your TV remote controller to control the teletext service.  
The teletext button doesn’t exist on our remote controller.  
When the service supports teletext, the Teletext icon  
is displayed on the I-plate.  
**  
**  
4.7 Programme Information (I- plate)  
Programme information is always displayed for a specific period of time whenever you switch  
services. You can view the programme information by pressing the i  
button while watching a  
programme. Press the EXIT  
button to hide the I-plate.  
1. General Information  
General Information is displayed as follows on the screen.  
1. Service number and service name  
2. Programme name  
3. Icons  
**  
**  
**  
**  
GB 19  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Basic Operation  
**  
Displayed only if this programme is reserved.  
Represents parental level. It indicates the minimum level of ages that the  
programme is targeted at.  
Displayed only when the service is a locked service.  
Displayed only when the service is a scrambled service.  
Displayed only when subtitle information is available.  
Displayed only when there is any teletext information.  
Displayed only when the programme is a dolby digital one.  
**  
4. DST(Day Saving Time) : displayed only during summer time  
5. Current time  
6. Detailed programme information: displayed if detailed programme information is provided.  
7. Progress bar : displays programme progress bar.  
8. Next programme Information : displayed if next programme information is provided.  
Press the button to display the next programme information.  
Note: If there is no available programme information, programme information is not displayed.  
**  
**  
2. Detailed Programme Information  
You can see detailed information about the current programme.  
Press the i  
button where I-plate is displayed to view detailed  
information.  
Note:  
•
•
Press the i  
button again to hide the information box.  
If the detailed programme information is more than one  
page, use  
button to move to the previous or next  
page.  
**  
**  
**  
**  
GB 20  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
4.8 Service Configuration  
You can view and confirm detailed information about the current channel and change the information  
in necessary.  
1. Press the MENU  
2. Select Select Service using the  
the OK or u button.  
3. Select Simple or Advanced using the  
button.  
button and press  
button and  
press the OK  
button to display the service list.  
4. Press the MENU  
to display the service configuration  
when the service list is displayed.  
**  
Note:  
•
Press the OK  
button while watching a programme to display the service list. Then the  
following functions in the service configuration list are performed to the service where cursor is  
located.  
•
Press the MENU  
or EXIT  
button to exit the service configuration screen.  
1. Add a channel to favourite group  
**  
**  
You can add current service to the favourite group immediately. Also, you can add a service to  
multiple Favourite groups.  
**  
1. Select Favourites using the  
button.  
button and press the OK  
2. Select Favourite Group using the  
button to register for  
favourite group.  
3. Press the OK  
button again on the selected favourite group to release the registered  
service.  
Note: For detailed information about how to change Favourite Group's name and how to  
register Favourite Service for the whole services, refer to Chapter 5.  
2. Lock/Unlock a Channel  
You can lock or unlock the current channel while watching a programme.  
**  
1. Select Lock using the  
button.  
button.  
button.  
2. Select Lock option using the  
3. Select Unlock option using the  
4. You will be prompted to enter your PIN code. Enter your PIN code to unlock the service.  
Note: When switching to the locked service, you must enter the PIN code to watch a  
programme. The Default PIN code is 0000. If you have forgotten your PIN code, please  
contact your local product distributor.  
**  
**  
**  
**  
GB 21  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Basic Operation  
**  
3. Skip a Service  
You can skip the current service.  
**  
1. Select Skip using the  
button.  
button.  
2. Select Skip or not using the  
Note: If you skip the service, you cannot select the service in the service list.  
4. Delete a Service  
You can delete the current service while watching a programme.  
1. Select Delete using the  
button and press the OK  
.
2. Select OK in the confirmation message to deletethe  
service and press the OK button.  
3. Select Cancel in the confirmation message tocancel the  
deleting the service and press the OK  
button.  
**  
**  
**  
**  
**  
**  
GB 22  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
5. Channel List  
**  
4 types of service lists are provided for easy and quick service finding. You can see the service list  
when you had searched before. To this menu, you should set service group you want in the Service  
Organising menu.  
Note:  
•
Press the EXIT  
MENU button to exit the menu screen.  
Whenever you press the TV/RADIO button while the service list is displayed, the service  
list will be switched between TV and Radio service list.  
button to save the changes and return to the previous menu, press the  
•
**  
All  
Press the RED  
service number.  
button to display the list of all services which is sorted by  
button to display the list of the favourite services with 4  
Favourite  
Network  
Alphabet  
Press the GREEN  
subgroups that you can organise services by your private taste.  
Press the YELLOW  
subgroups that you can organize services by the type of network.  
button to display the list of the services with several  
Press the BLUE  
button to display the list of all services which is sorted by  
service name.  
5.1 Selecting the Simple or Advanced Service List  
**  
**  
You can view the simple or detailed service list.  
1. Press the MENU  
2. Select Select Service using the  
the OK or button.  
3. Select Simple or Advanced using the  
button.  
button and press  
button and  
or  
press the OK  
button to display the service list.  
4. Select your desired service using the  
NUMERICAL (0~9) button and press the OK  
button to  
watch the service.  
Note: Press the MENU  
to display the service configuration when the service list is  
displayed. Refer to Chapter 4.7 for detailed information.  
**  
**  
**  
**  
GB 23  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
5. Channel List  
**  
5.2 Changing Service List Group  
You can see four types of service list group using the colour buttons.  
1. Press the OK button while watching a programme to  
display the service list.  
2. Select your desired service group using the COLOUR  
(RED, GREEN, YELLOW and BLUE) button.  
3. Select your desired subgroup or service using the  
button and then press the OK  
button.  
4. The service list for the selected subgroup is displayed.  
5.3 Organising All Services  
You can edit all TV or Radio services to delete, move, lock, skip or rename the selected service.  
1. Press the MENU  
2. Select Installation using the  
OK button.  
3. Select Service Organising using the  
press the OK button.  
button.  
button and press the  
button and  
**  
**  
4. You will be prompted to enter your PIN code. Enter your  
PIN code using NUMERICAL (0~9) button. The default  
PIN code is 0000.  
5. Select Organise TV Services or Organise Radio Services using the  
button and press  
button.  
the OK  
button.  
6. Select Organise All Services using the  
button and press the OK  
1.Delete a Service  
You can delete the selected service.  
1. Select your desired service using the  
button.  
2. Press the RED  
button to delete the selected service.  
If you cancel the deleting, press the RED  
button again.  
3. Press the OK  
button.  
**  
**  
**  
**  
GB 24  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2. Move a Service  
You can move the selected service.  
1. Select your desired service using the  
button.  
2. Press the GREEN  
button to move the selected service and press the  
button again.  
button.  
If you cancel the moving, press the GREEN  
3. Press the OK  
button.  
3. Lock a Service  
You can lock or unlock the selected service.  
1. Select your desired service using the  
button.  
2. Press the YELLOW  
button to lock the selected service.  
If you cancel the locking, press the YELLOW  
button again.  
3. Press the OK  
button.  
4. Skip a Service  
You can skip or not skip the selected service.  
1. Select your desired service using the  
button.  
**  
**  
2. Press the BLUE  
button to skip the selected service.  
If you cancel the skipping, press theBLUE  
button again.  
3. Press the OK  
button.  
5. Rename a Service  
You can rename the selected service.  
1. Select your desired service using the  
button.  
2. Press the WHITE  
button to rename the selected  
service. The keyboard display on the screen.  
3. Select a service name using the  
and press the  
OK  
button.  
**  
**  
**  
**  
GB 25  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
5. Channel List  
**  
You can also use four direction buttons.  
Standard Press the RED  
button to see the standard keyboard.  
Extend  
OK  
Press the GREEN  
Press the YELLOW  
Press the BLUE  
button to see the extended keyboard.  
button to save the new name after entering a new name.  
button to delete the entered name.  
Delete  
Note: Press the YELLOW  
or EXIT  
button to save the changes and return to the  
previous menu.  
5.4 Organising Favourite Groups  
You can edit the service of the favourite group and you can delete, move, lock, skip or rename the  
selected service in the favourite group mode. Each of TV and Radio has four favourite groups. Each  
group contains up to 100 services.  
1. Press the MENU  
2. Select Installation using the  
OK button.  
3. Select Service Organising using the  
press the OK button.  
button.  
button and press the  
button and  
**  
**  
4. You will be prompted to enter your PIN code. Enter your  
PIN code using NUMERICAL (0~9) button. The default  
PIN code is 0000.  
5. Select Organise TV Services or Organise Radio Services using the  
button and press  
button.  
the OK  
button.  
6. Select Organise Favourite A~D using the  
button and press the OK  
1. Selecting Group, Favourite or Service mode  
1. Select Group, Favourite Group or Services mode using the  
button.  
2. Select your desired service or group using the  
button in the each mode.  
Note: Refer to Chapter 5.3 to edit the selected service in the Favourite Group mode.  
2. Adding a Service in your desired group  
1. Select Services using the  
2. Select your desired service using the  
3. The service adds in your desired favourite group.  
button.  
button and press the OK  
button.  
Note: Refer to Chapter 5.3 to edit the selected service in the Favourite Group mode.  
**  
**  
**  
**  
GB 26  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
5.5 Organising Networks  
You can edit the service using the network unit. The provider name is displayed on the left side of  
screen and the TV/Radio service included in the highlighted network is displayed on the right side of  
screen. Only the Delete, Move, and Rename function can be used in Networks mode.  
1. Press the MENU  
2. Select Installation using the  
OK button.  
3. Select Service Organising using the  
press the OK button.  
button.  
button and press the  
button and  
4. You will be prompted to enter your PIN code. Enter your  
PIN code using NUMERICAL (0~9) button. The default  
PIN code is 0000.  
5. Select Organise Networks using the  
button and press the OK  
button.  
Note: Select Networks or Services mode using the  
button. Refer to Chapter 5.3 and 5.4  
for detailed information to edit Networks mode.  
**  
**  
**  
**  
**  
**  
GB 27  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
6. TV Guide  
**  
The TV Guide displays the programme information. You can reserve it in the TV Guide menu.  
Not:e: Press the GUIDE  
button to exit the Guide screen.  
Press the button to move the cursor to the next page.  
**  
TV Guide mode includes five buttons to do four different modes :  
Now/Next  
Weekly  
Press the RED  
button display the current and next programme list.  
button to display the programme list for one-week.  
button to display the reserved programme list.  
Press the GREEN  
Press the YELLOW  
Press the BLUE  
Press the WHITE  
Reserved  
Quick  
button to display the simple TV Guide list.(Quick mode)  
button to reserve the selected programme on the Now,  
Reserving  
Next or Weekly mode.  
6.1 Viewing Programme Guide Information  
You can view the programme information for all services.  
Press the GUIDE  
button or select the TV Guide on the  
Main menu to enter the TV Guide.  
**  
**  
**  
Note: Press the TV/RADIO  
button to switch to the Radio  
Guide.  
1. Viewing Guide Information by Now or Next mode  
You can view the programme information for desired service list by now or next time.  
1. Press the RED  
button to display the current or future  
service list.  
2. Select your desired service using the  
or CH-/CH+  
button.  
button and press the OK  
3. The programme for selected service is displayed.  
**  
**  
**  
**  
GB 28  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2. Viewing Guide Information by Weekly mode  
You can view the programme information for a week.  
1. Press the GREEN  
button to display the service list for  
a week.  
2. Select a day of the week using the  
the OK button.  
3. Select your desired service using the  
press the OK button  
button and press  
button and  
4. The programme for selected service is displayed.  
Note: The weekly mode provides programme information from today to the next 7 days.  
3. Viewing the Reserved Programme List  
You can view the programme list already reserved on the Now, Next or Weekly mode of the TV  
Guide. Maximum eight programmes can be reserved.  
1. Press the YELLOW  
button to display the reserved  
programme list.  
2. Select your desired service using the  
button and  
**  
**  
press the WHITE  
button to cancel the reserved  
programme.  
Note:  
•
If the service is locked, parental controlled or restricted by watching time, you will be prompted  
to enter your PIN code. Enter your PIN code to complete the reservation.  
•
The programme list includes service name, date, duration time, reservation mode and  
programme name.  
**  
**  
**  
**  
GB 29  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
6. Programme Guide  
**  
4. Viewing Guide Information by Quick mode  
You can view a simple TV Guide like an information box.  
1. Press the BLUE  
button to display the service list by  
quick mode.  
2. Select your desired service using the  
or CH-/CH+  
button.  
button and press the OK  
3. The programme for selected service is displayed.  
**  
Red vertical line  
Indicates the current time.  
Black and White bar  
Time range of the bar  
Displays the proceeding state of the programme.  
30 minute per block.  
6.2 Reserving a Programme  
You can reserve a programme or edit watching-reserved programme.  
**  
**  
If you reserve a programme, you must select Now, Next, Weekly or Quick mode. Also you can  
reserve or edit a programme in the I-plate watching the current programme.  
1. Press the GUIDE  
button or select the TV Guide on  
the Main menu to enter the TV Guide.  
2. Select your desired mode using the COLOUR button.  
Refer to Chapter 6.1.  
3. Select your desired service using the  
button in the Now, Next, Weekly or Quick and  
press the WHITE button.  
or CH-/CH+  
**  
**  
**  
**  
GB 30  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1. Reserving New Programme  
You can reserve programmes.  
Select Once, Daily or Weekly using the  
button and press the OK  
button to save.  
Once  
Reserve once.  
Daily  
Reserve everyday.  
Weekly  
Reserve each once a week.  
Note:  
•
You can reserve or a programme in the I-plate using WHITE  
button.  
•
•
You can reserve up to 20 programmes.  
If your desired programme is overlapped other programme, adjust the reservation  
appropriately. If the service is locked, restricted by watching time, you will be prompted to  
enter your PIN code to complete the reservation.  
2. Editing the Reserved Programme  
You can change the reserved programme mode or cancel the reservation. When you select your  
desired service, select the reserved programme to change the reservation mode. You can confirm  
with icon if the programme is reserved or not.  
1. Press the WHITE  
button to change the reservation mode in the reserved programme.  
button and press the OK button to save.  
button and press the OK button, If you cancel the  
**  
**  
2. Select desired mode using the  
3. Select Delete using the  
reservation.  
**  
**  
**  
**  
GB 31  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
7. Parental Control  
**  
You can set all other items suitable for your environment.  
Note:  
•
•
Press the EXIT  
to save the changes and return to the previous menu. Press the MENU  
button to exit the Menu screen.  
The Default PIN code is 0000. If you have forgotten your PIN code, please contact your local  
product distributor.  
7.1 Parental Control  
You can set parental control for each programme and also change your PIN code.  
1. Press the MENU  
2. Select Parental Control using the  
the OK button.  
button.  
button and press  
3. When prompting message is displayed to ask PIN code,  
enter the PIN code using the NUMERICAL(0~9) button.  
The default PIN code is 0000.  
1. Setting Censorship  
**  
**  
Censorship Classification allows you to block programmes according to the age level you have  
set.  
1. Select the Censorship Classification using the  
2. Select your desired Age Level using the  
button.  
button and press the OK  
button.  
No block  
All programmes can be watched because there is no age limitation.  
Programmes are blocked under the age of 6, 10, 14 or 18.  
All Programmes are blocked without considering the age level.  
6 ,10 , 14, 18  
Total block  
Note: You have to enter PIN code to watch the programme which is blocked by the age level.  
2.Change PIN  
You can change the current PIN code into new one.  
1. Select Old PIN Code using the  
NUMERICAL(0~9) button.  
button and enter a PIN code using the  
2. Enter a new PIN code using the NUMERICAL (0~9) button in the New PIN Code.  
3. Enter the new PIN code again to confirm in the Verify Changed PIN Code.  
**  
**  
**  
**  
GB 32  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Installation  
**  
8.1 System Setting  
You can set the system according to your preference.  
1. Press the MENU button.  
2. Select Installation using the  
OK button.  
3. Select System Setting using the  
the OK button.  
4. Select your desired item using the  
press the OK button  
button and press the  
button and press  
button and  
1. Language Setting (Menu, Audio, and Subtitle Language)  
You can set the language for Menu, Audio, and Subtitle. Default language is English.  
1. Select Menu/Audio/Subtitle Language using the  
button.  
2. Press the  
button to display the available Language  
List.  
3. Select your desired language using the  
button and  
**  
**  
press the OK  
button.  
2. Time Setting  
You can specify the current time, wakeup time, and sleep time.  
1. Select Current Time/ Wakeup Time / Wakeup Service  
No / Sleep Time using the  
2. Press the or NUMERICAL(0~9) button to set the time  
and Service No.  
button.  
**  
**  
**  
**  
GB 33  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Installation  
**  
•
•
•
Current Time  
Enter the offset value using the standardized information of the current service area. This will  
be used as the standardized time for the I-plate, TV Guide, Wakeup and Sleep Time.  
**  
Time Offset  
Current Time is based at the stream of the current service. GMT is changed by from 30  
minutes to 1 hour. The current time is set automatically whenever GMT Offset changes  
**  
Wakeup Time  
You can set the time when the product is automatically powered on. Select the Disabled not  
to set the Wakeup Time.  
**  
•
•
Wakeup Service No.  
You can set the service number when the product is automatically powered on..  
**  
Sleep Time  
You can set the time when the product is automatically powered off. Select the Disabled not  
to set the Sleep Time.  
3. A/V Output Setting  
You can set Audio or Video Output.  
**  
**  
1. Select Audio Output, Screen Mode, Display Format, TV  
Standard or NTSC Mode using the  
button.  
2. Press the vbutton to set each item.  
**  
•
•
Audio Output  
Set the audio mode which is output from the TV RCA Cable. Select Stereo or Mono.  
**  
Screen Mode  
You can set the aspect ratio of your TV which is connected to your receiver. Select 4:3 or  
16:9.  
**  
**  
**  
**  
GB 34  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
•
Display Format  
You can select the Display Format according to TV Screen Mode.  
If the Screen Mode is set to 4:3, you can select one from Letter-box, Centre or Auto.  
If the Screen Ratio is set to 16:9, you can select one from Pillar-box, Full or Auto.  
**  
•
•
TV Standard  
You can select the TV Standard: PAL or NTSC. Select one from Auto, PAL or NTSC.  
Auto The TV supports both PAL and NTSC.  
PAL  
The TV supports only PAL.  
NTSC The TV supports only NTSC.  
**  
NTSC Mode  
If TV Standard is set to NTSC, set the following mode. Only when TV Standard is set to Auto  
or NTSC, set the NTSC mode. Select 3.58 or 4.43.  
4. UHF Tuning  
You can set the UHF Tuning service.  
1. Select Channel, PAL Standard or Offset using the  
button.  
2. Press the  
button to set each item.  
**  
**  
**  
•
Channel  
You can select UHF Services for the TV.  
The Service range and Frequency change according to PAL Standard.  
CH21~CH69  
CH28~CH69  
CH13~CH62  
CH21~CH69  
PAL I/G for Europe  
PAL B for Europe/Australia  
PAL D for China  
PAL K for Russia  
**  
**  
**  
**  
GB 35  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Installation  
**  
•
PAL Standard  
Select a PAL Standard according to the above range of channels. Select one option among  
PAL I, PAL B,PAL G, PAL D, PAL K .  
**  
•
Offset  
You can adjust fine tuning setting. Select a range between -4~+4.  
5. Other Setting  
1. Select OSD Transparency, Info. Box Display Time,  
Changing to Reserved Service using the  
button.  
2. Press the button to set each item.  
**  
•
OSD Transparency  
You can set the transparency of On Screen Display. Select one option among Opaque,  
25,50,75 or Transparent.  
Opaque  
25, 50,  
75  
Fully opaque screen  
As the number is bigger, the screen is more transparent.  
**  
**  
Transparent Fully transparent screen  
**  
•
•
Info. Box Display Time  
You can set the duration during which the information box is to be automatically displayed  
when you switch the service. Select a value between 1 ~ 20 seconds. When it is set to 0 , the  
information box will not be displayed when you switch the service.  
**  
Changing to Reserved Service  
When you reserved time has come during the view of services:  
Manual  
Manually changed to the reserved service. A message  
display in the screen. Press the OK  
the reserved service or press the EXIT  
keep viewing the current service.  
button to view  
button to  
Auto  
automatically changed to the reserved service.  
**  
**  
**  
**  
GB 36  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
8.2 Service Searching  
1. Press the MENU  
button.  
2. Select Installation using the  
button and press the  
button and  
OK  
3. Select Service Searching using the  
press the OK button.  
button.  
4. When prompting message is displayed to ask PIN code,  
enter the PIN code using the NUMERICAL(0~9) button.  
The default PIN code is 0000.  
5. Select your desired item using the  
button and press the OK  
button.  
1. Automatic Search  
If your receiver is connected to the aerial and television, you can automatically search services  
without entering any other information.  
1. Select Start Service or End Service using the  
button.  
2. Press the  
or NUMERICAL(0~9) button to input the  
start or end service number  
**  
**  
3. Press the OK  
button to start the search.  
2. Custom Search  
You can search services manually by searching parameters, if you know the service information.  
Select Channel, Frequency, Mode, Guard Interval or Network  
Search using the  
button and press the  
button.  
**  
**  
**  
**  
GB 37  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Installation  
**  
•
Channel Number  
Select the number of VHF/UHF channel, in which the transport stream is transmitted by using  
also the NUMERICAL(0~9) button. If the number is correct, the receiver will search any  
services easily.  
**  
•
Frequency  
Enter the your desired frequency to search directly. When entering frequency, the appropriate  
service for the entered frequency is automatically displayed on Service. When you enter the  
frequency, you use the NUMERICAL(0~9) button.  
**  
•
•
•
Mode  
Select one option among Auto, 2K FFT and 8K FFT for service search. If you don't know the  
value, please select Auto.  
**  
Guard Interval  
Select one option among Auto, 1/4,1/8,1/16 and 1/32 for service search. If you don't know the  
value, please select Auto.  
**  
Network Search  
If specified frequency service information and other service information are provided together,  
the service, which belongs to other frequency service, is also searched. Select Yes to search  
all services in the network. If not, select No.  
**  
**  
3. Default Search  
Default Search restores the receiver to the default settings  
Warning: Please Note that once you perform Default Search, all data such as Aerial Setting  
information Service List, and User Configured data are deleted.  
1. Select OK and press the OK  
button to restore all  
setting to Factory Default.  
2. Select CANCEL and press the OK  
button to cancel  
default setting.  
3. When default setting is completed, Automatic Search is  
automatically displayed, which helps Service Search.  
**  
**  
**  
**  
GB 38  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
4. Antenna Power  
When you connect an active antenna to the ANTENNA IN connector on the rear of the receiver.  
Select On or Off using the button.  
On 5V power supply from the active antenna cable.  
Off No power supply.  
**  
**  
**  
**  
**  
**  
GB 39  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
9. Software Upgrade  
**  
In order to maintain proper performance of this product, it is essential to have the most up-to-date  
software. The latest news and release of software versions may be found at the HUMAX website –  
http://www.humaxdigital.com.  
It is recommended that you periodically check for the availability of software upgrade.  
9.1 OTA (Over the Air)  
OTA, an abbreviation of Over–the-Air, means that downloads the software can be downloaded  
where the manufacturer reserves the right to decide when and where to release through Aerial  
system.  
Over the Air(OTA) is simply an alternative method for downloading software versions. However, the  
manufacturer reserves the right to decide when and where this software upgrade can take place by  
beaming latest software versions over the air via aerial systems. The software upgrade via aerial  
system will only occur under the following circumstances.  
1. The equipment should have appropriate loader software.  
**  
Caution: Please note that if you don't have normal loader software, the equipment may  
not be upgraded or work after software upgrade.  
2. The manufacturer decides to release software downloading via a designated aerial system.  
3. The equipment must be tuned properly to the same channel that the manufacturer uses.  
4. Upgrade software when the quality of receiving signal strength is high. If the weather is not so  
good that the quality of receiving signal strength is not recommendable, perform the software  
**  
**  
upgrade later.  
**  
Caution :  
•
Please be careful to keep the power on and the power cord plugged in during software  
upgrade. If the power is off during software upgrade, it may cause fatal damage to the  
product.  
•
Please be careful not to pull out the signal line (co-axial Cable) during software upgrade.  
Upgrade may be interrupted and the product may not work.  
Note:  
•
The other functions of product cannot work at all during software upgrade.  
•
It may take 5 ~10 minutes to upgrade software.  
**  
**  
**  
**  
GB 40  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1. If new software is found when powering on  
1. A message will be displayed to notify that new software is found.  
2. Select Yes and press the OK  
button to upgrade the software.  
3. Starts downloading new software. Please wait until the upgraded is completed.  
4. When completing the software upgrade, the equipment is automatically powered off and on  
again.  
2. STB Upgrade  
You can perform STB Upgrade only if you know MUX information of software upgrade correctly.  
1. Press the MENU  
2. Select Installation using the  
OK button.  
button.  
button and press the  
button and press the OK  
button and press the  
3. Select Status using the  
button.  
4. Select STB Upgrade using the  
OK  
button.  
**  
5. When prompting message is displayed to ask PIN code, enter the PIN code using the  
**  
**  
NUMERICAL(0~9) button. The default PIN code is 0000.  
6. Select Channel, Frequency, Mode or Guard Interval and press the OK  
button to search  
software.  
7. It is displayed whether or not new software exist. If new software does not exist, a message  
will display and press the OK  
button to return to the STB Upgrade Menu.  
8. Select Yes and press the OK  
button to start updating. Select No and press the OK  
button to return to the previous menu. Performs Software Upgrade. Please wait until it is  
completed. When completing the software upgrade, the product is automatically powered off  
and on again.  
Note: How to setting parameters in STB Upgrade is the same as how to set parameters in  
Custom Search . Refer to Custom Search.  
**  
**  
**  
**  
GB 41  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
9. Software Upgrade  
**  
9.2 Software Upgrade from PC  
You can connect your receiver to the PC directly and upgrade your software by transferring the new  
software from the PC. Follow these steps to download new software from PC to this product.  
1. Download new software file(HDF files) equivalent for this product model from our website into  
your computer(http://www.humaxdigital.com).  
2. Download and install download tool from our website into your computer.  
3. Connect your PC to this product with RS-232C serial cable.  
4. Execute installed download tool, and then follow the instructions contained the download tool.  
5. Power on/off to make this product operating.  
**  
**  
**  
**  
**  
**  
**  
GB 42  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
10. Status and Utility  
**  
10.1 Status  
You can view all system information, and signal detection.  
1. Press the MENU button.  
2. Select Installation using the  
OK button.  
button and press the  
3. Select Status using the  
button and press the OK  
button.  
4. Select STB Status or Signal Detection using the  
button and press the OK button.  
1. STB Status  
You can view System information.  
Confirm the information about H/W Version, S/W Version,  
Device Driver Version, S/W Last Update, Loader Version,  
System ID and Current Service.  
**  
**  
2. Signal Detection  
You can view the signal level and signal quality receiving for the service that is currently on AV.  
Display information about the aerial and transponder, which  
current service belongs to and the graphs and percentage of  
Signal Level and Quality of the service.  
**  
**  
**  
**  
GB 43  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
10. Status and Utility  
**  
10.2 Utility  
STB supports additional functions such as calendar , biorhythm, and game.  
1. 1. Press the MENU  
button.  
button and press the OK  
2. Select Utility using the  
or button.  
3. Select Calendar, Biorhythm or Games using the  
button and press the OK button.  
1. Calendar  
You can see the calendar specified year or month.  
Press the  
Press the  
button to change month.  
button to change year.  
Press the OK  
or EXIT  
button to return to the previous  
menu.  
**  
**  
2. Biorhythm  
You adjust your birth year and date to see your current biorhythm status.  
Press the  
button to move next step.  
Press the  
button to change a value in the step.  
button to return to the previous menu.  
Press the EXIT  
3. Games  
You can enjoy games.  
Press the  
or COLOUR button to enjoy games. Press the EXIT  
or BLUE  
button  
to exit the game menu.  
**  
**  
**  
**  
GB 44  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
11. Manipulating your TV using Remote Control  
**  
You can manipulate TV using the remote control provided by Humax.  
Note: This function may not be supported depending on TV model.  
TV code setting  
Note: While you are setting TV code, please keep pressing TV button.  
1. Point remote control towards the remote control receiving parts of TV.  
2. Press the TV  
button and the TV button LED blinks once.  
Keep pressing TV button for 3 seconds, then TV button LED turn on.  
Press three numbers of TV code using the NUMERICAL (0~9) button orderly.  
Refer to the following Code for TV manufacturer.  
3. TV button LED blink twice when you detach your finger from the TV button.  
4. TV power turns on or off when the setting is completed.  
**  
[Code for TV manufacturer] Table  
**  
**  
**  
**  
**  
**  
**  
GB 45  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
11. Manipulating your TV using Remote Control  
**  
**  
**  
**  
**  
**  
**  
GB 46  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
**  
**  
**  
**  
**  
**  
GB 47  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
11. Manipulating your TV using Remote Control  
**  
**  
**  
**  
**  
**  
**  
GB 48  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
**  
**  
**  
**  
**  
**  
GB 49  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
11. Manipulating your TV using Remote Control  
**  
**  
**  
**  
**  
**  
**  
GB 50  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
**  
**  
**  
**  
**  
**  
GB 51  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
11. Manipulating your TV using Remote Control  
**  
**  
**  
**  
**  
**  
**  
GB 52  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
12. Menu Map  
**  
**  
**  
**  
**  
**  
**  
GB 53  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
13. Trouble Shooting  
**  
13.1 Trouble Shooting  
Before contacting your local service, please make sure following instructions. If the product does not  
work normally after completing the following trouble shooting, please contact your local product  
distributor or service centre.  
1. No message is displayed on the front panel or product has no power  
- Check the main power cable and check that it is plugged into a suitable power outlet.  
- Check whether the Power Switch is On.  
2. No picture  
- Make sure that the product is in Operation Mode.  
- Make sure that the AV Cable is firmly connected to the TV.  
- Make sure that Aerial line is correctly connected to the equipment  
- Check the brightness level of TV.  
- Check the service is on air.  
3. Poor picture & sound quality  
- Install the aerial in a place where there is no obstacle.  
- Make sure there is no mobile phone or microwave oven near the equipment.  
- Use 75 coaxial cable to connecting TV and aerial.  
4. No or poor sound  
- Check the volume level of the TV and Receiver.  
- Check the Mute status of the TV and product.  
- Press the Audio button to change the Sound Track type.  
**  
**  
5. Remote controller does not operate  
- To control the equipment with the remote controller, the remote controller's top end should  
directly point towards the receiving part of receiver's remote controller.  
- Check the battery of Remote controller.  
6. Reservation is not available  
- Check whether it it not overlapped with other reservation.  
- Cehck whether the power switch is off.  
**  
**  
**  
**  
GB 54  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
13.2 Error Message  
Error message  
No or bad signal  
Possible causes  
What to do  
The aerial is not pointing properly.  
Adjust aerial.  
Check the cable from the aerial.  
If you cannot resolve the problem you  
may need to have your aerial and  
installation tested by a professional.  
The service is  
scrambled or not  
available.  
The service has signal, but no audio  
or video.  
Confirm if the service is currently on  
air  
The service is not deleted by  
broadcasting company.  
The channel is for data broadcasting. Cannot watch the channel in usual  
way.  
The channel is  
scrambled.  
This digital terrestrial receiver does  
not support the service that enables to  
descramble the scrambled services.  
The audio is not  
available.  
The service has signal, but no Audio. Press the Audio button to confirm if  
the service has Audio.  
**  
**  
**  
**  
**  
**  
GB 55  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
14. Specification  
**  
Tuner & Channel  
Input Connector  
IEC-Type, IEC 169-24, Female  
IEC-Type, IEC 169-24, male  
48.5MHz to 226.5MHz (VHF)  
470MHZ to 862MHz (UHF)  
-10 to -70dBm  
RF Loop through Output connector  
Frequency Range  
Signal Level  
Demodulation  
Mode  
OFDM  
2K, 8K  
FEC mode  
Guard Intervals  
1/2, 2/3, 3/4, 5/6 & 7/8  
1/4, 1/8, 1/16 & 1/32  
MPEG Transport Stream A/V  
Decoding  
Transport Stream  
Profile Level  
MPEG-2 ISO/IEC 13818  
MPEG2 MP@ML  
Input Rate  
15 Mbit/s Max  
Aspect Ratio  
Video Resolution  
Audio Decoding  
Audio Mode  
4:3, 16:9 Letter box  
720 x 576  
**  
**  
MPEG/MusiCam Layer I & II  
Single /Dual mono/ Stereo /Joint stereo  
**  
**  
**  
**  
GB 56  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
Memory  
Flash Memory  
1 Mbytes  
16 Mbytes  
8 Kbytes  
Graphics (MPEG) & System Memory  
EEPROM  
RF-Modulator  
RF/Loop-through Output Connector  
Frequency  
75 , IEC 169-2  
470 ~ 862 MHz  
CH 21 ~ 69  
PAL I/G/B  
Output Channel  
TV standard  
Preset Channel  
Power Supply  
CH 36  
Input Voltage  
DC 12V 1.4A  
Type  
Switching Mode Power Supply (SMPS)  
Operation mode : Max. 10W  
Stand-by mode : Max. 5W  
Power Consumption  
AC Power Adaptor  
Protection  
AC 100 ~ 240V 50/60Hz Max 1.0A  
Separate internal fuse & Lightning protection  
**  
**  
Physical Specification  
Size  
215 mm X 41 mm X 158 mm  
1.3 kg  
Weight (Net)  
Operating Temperature  
Storage Temperature  
0
to +45  
-10 to +70  
**  
**  
**  
**  
GB 57  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
15. Glossary  
**  
Frequency  
**  
The number of cycles or events per one second, which is expressed in the unit of hertz  
**  
FTA (Free- To-Air)  
**  
An unscrambled broadcast, which you can view without additional payments to a service provider.  
**  
Frequency  
**  
An unscrambled broadcast, which you can view without additional payments to a service provider.  
**  
OSD (On Screen Display)  
**  
The function that displays the information about the monitor that the user needs or has to know on  
the screen directly. OSD information includes brightness, contrast, tuning, RGB adjustment, and  
screen size and positions (top, left, width, and height), and so on.  
**  
OTA (Over The Air)  
**  
The tMeans that software downloads where the manufacturer reserves the right to decide when and  
where to release them through aerial.  
**  
**  
**  
Service  
**  
A channel to which a decoder or TV is tuned.  
**  
**  
**  
**  
GB 58  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
16. Service and Support  
**  
You can get information such as a troubleshooting guide, software upgrades and product support  
guide from the following web sites and call center (Hotline).  
Please try to contact to your local dealers first when you have any problem.  
Web site and e-mail  
Homepage  
http://www.humaxdigital.com  
English  
Deutsch  
Arabic  
http://www.humaxdigital.com/Deutsch/  
http://www.humaxarabia.com  
**  
HCSA (Humax Customer Service Area)  
Software Download, Information and Technical Q&A  
http://www.humaxdigital.com/hcsa/  
English  
http://www.humaxdigital.com/Deutsch/hcsa/  
Deutsch  
**  
E-mail (Technical Q&A)  
tech-info@humax-digital.co.uk  
techinfo@humax-digital.de  
Europe & North Africa  
Germany  
**  
**  
callcenterME@humaxdigital.com  
Webmaster@humaxdigital.com  
Middle East  
Asia & Other area  
**  
**  
**  
**  
GB 59  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
16. Service and Support  
**  
Call Center  
Humax Middle East Call Center (Dubai, UAE)  
Tel: +971 (0)4 359 2323 (Open: 9:00 - 20:00 / close on Friday)  
E-mail: callcenterME@humaxdigital.com  
Open: Local Time in Dubai (GMT+4)  
9:00 - 20:00 (Saturday - Thursday, close on Friday)  
Support Language: English/Arabic  
**  
Humax Hotline (Germany)  
Germany: 01805 778 870 ( 0,12/Min)  
Other Countries: + 49 1805 778 870 ( 0,12/Min+ International Call Charge)  
Open: Local Time in Germany (GMT+1)  
8:00 - 20:00 (Monday - Friday)  
8:00 - 18:00 (Saturday)  
Support Language: Deutsch/English  
**  
**  
**  
Humax BTCI Hotline (Premiere Model)  
Germany: 01805-778900 ( 0,12/Min)  
Austria: 0900-900633 ( 0,33/Min)  
**  
For hardware repair, please refer to support website. (Homepage or HCSA)  
**  
**  
**  
**  
GB 60  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Greenheck Fan Ventilation Hood SEFSD Series User Manual
Hamilton Beach Oven 32180C User Manual
Hamilton Beach Toaster 840119200 User Manual
Harbor Freight Tools Stove 91614 User Manual
HP Hewlett Packard Network Router G250 User Manual
Humminbird Fish Finder Model Matrix 87 User Manual
Hunter Fan Fan 23685 User Manual
Hunter Fan Outdoor Ceiling Fan 99122 User Manual
Husqvarna Snow Blower 524S User Manual
Hyundai Food Saver Q70U User Manual