Humax Satellite TV System F2 FOX User Manual
**  
**  
**  
**  
**  
Notice  
**  
Copyright (Copyright © 2001 HUMAX Corporation)  
Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval  
of ownership of copyright and copyright law.  
**  
Warranty  
The information in this document is subject to change without notice. HUMAX does not have any responsibility  
for direct, indirect, accidental, necessary and other damage due to your offer or use of the information  
contained in this manual.  
**  
Trademarks  
VIACCESS™ is a trademark of France Telecom.  
CryptoWorks (TM) is a trademark of Philips Electronics N.V.  
Irdeto is a trademark of Mindport BV.  
Nagravision is a registered trademark of Kundelski S.A.  
Conax is a trademark of Telenor Conax AS.  
'Dolby' and the double-D symbol are trademarks of Dolby Laboratories.  
This receiver manufactured under license from Dolby Laboratories.  
**  
Thank you for purchasing a HUMAX satellite receiver. Please read this user manual carefully, to be able to  
safely install, use and maintain the receiver at maximum performance. Keep this user manual next to your  
receiver for future reference.  
**  
**  
**  
**  
**  
**  
GB 1  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Safety and Warning  
**  
This digital satellite receiver has been manufactured to comply with international safety standards. Please  
read the following safety precautions carefully.  
**  
Safety Instructions and Precautions  
**  
1. MAINS SUPPLY  
**  
90 - 250V AC 50/60Hz  
Operate your product only from the type of power supply indicated on the marking label. If you are not  
sure of the type of power supplied to your home, consult your local power company. Disconnect the  
receiver from the mains before you start any maintenance or installation procedures.  
**  
2. OVERLOADING  
**  
Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock.  
**  
3. LIQUIDS  
**  
The receiver should not be exposed to any liquids such as dripping or splashing. In addition, no objects  
filled with liquids, such as vase, should be placed on the apparatus.  
**  
4. CLEANING  
**  
Disconnect the receiver from the wall outlet before cleaning. Use a light damp cloth (no solvents) to  
dust the receiver.  
**  
5. VENTILATION  
**  
The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. Do not stand  
the receiver on soft furnishings or carpets. Do not stack electronic equipment on top of the receiver.  
**  
**  
**  
6. ATTACHMENTS  
**  
Do not use any unsupported attachments as these may be hazardous or cause damage the receiver.  
**  
7. CONNECTION TO THE SATELLITE DISH LNB  
**  
Disconnect the receiver from the mains before connecting or disconnecting the cable from the satellite  
dish. Failure to do so can damage the LNB.  
**  
8. CONNECTION TO THE TV  
**  
Disconnect the receiver from the mains before connecting or disconnecting the cable from the satellite  
dish. Failure to do so can damage the TV.  
**  
9. EARTHING  
**  
The LNB cable must be buried in the ground. The buried cable of the system must comply with SABS  
061.  
**  
**  
**  
**  
GB 3  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Safety and Warning  
**  
10. LOCATION  
**  
Place the receiver indoors to avoid exposing it to lightening, rain or sun.  
Do not place it near a radiator or heat register.  
Make sure it has more than 10 cm clearance from any appliances susceptible to electromagnetic  
influences, such as a TV or a VCR.  
Do not block these openings with any object, and do not place the product on a bed, sofa, rug, or other  
similar surface.  
If you place the product on a rack or bookcase, ensure that there is adequate ventilation and that you  
have followed the manufacturer's instructions for mounting.  
Do not place the product on an unstable cart, stand, tripod, bracket, or table where it can fall. A falling  
product can cause serious injury to a child or adult, and serious damage to the appliance.  
**  
11. LIGHTNING, STORM, or NOT IN USE  
**  
Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left  
unattended and unused for long periods of time. This will prevent damage to the unit due to lightning  
and power-surges.  
**  
12. EXTRANEOUS OBJECTS  
**  
Do not insert anything through the openings in the unit, where they can touch dangerous voltage points  
or damage parts.  
**  
13. REPLACEMENT of PARTS  
**  
When replacement parts are required, be sure the service technician uses replacement parts specified  
by the manufacturer or those that have the same characteristics as the original part. Unauthori  
substitution may result in additional damage to the unit.  
**  
**  
**  
Warning  
**  
1. Follow these directions in order not to damage the power cord or plug.  
Do not modify or process the power cord or plug arbitrarily.  
Do not bend or twist the power cord too much.  
Make sure to disconnect the power cord with the plug held.  
Keep heating appliances as far as possible from the power cord in order to prevent the cover vinyl from  
melting.  
2. Follow these directions. Failure to follow one of them may cause electrical shock.  
Do not open the main body.  
Do not insert metals or inflammable objects inside the product.  
Do not touch the power plug with wet hands.  
Disconnect the power cord in case of lightning.  
3. Do not use the product when it is out of order. If you continue to use the product when defective,  
serious damage can be caused toit. Make sure to contact your local product distributor if the product is  
out of order.  
4. Please do not insert metal or alien substance into the slots for the modules and smart cards. In doing  
so can cause damage to the STB and reduce its life span.  
**  
**  
**  
**  
GB 4  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Contents  
**  
1. Before Using the Receiver  
GB7  
**  
1.1 Package Contents  
1.2 Front Panel  
GB7  
GB8  
1.3 Rear Panel  
GB9  
1.4 Remote Control  
GB10  
2. Setup  
GB12  
**  
2.1 Connecting the Antenna  
2.2 Powering On  
GB12  
GB13  
3. Installation Wizard  
GB14  
**  
3.1 Language  
GB14  
GB14  
GB14  
GB16  
GB16  
3.2 Area Setting  
3.3 Antenna Setting  
3.4 Automatic Search  
3.5 Time Setting  
4. Basic Operation  
GB17  
**  
**  
**  
4.1 Switching Channel  
4.2 Volume Control  
GB17  
GB17  
GB17  
GB17  
GB18  
GB19  
GB20  
4.3 Motion Still  
4.4 Change the Subtitle Language  
4.5 Change a Audio Language  
4.6 Programme Information (I- plate)  
4.7 Option List  
5. Channel List  
GB23  
**  
5.1 Displaying and Switching Channel List  
5.2 Changing Channel List Group  
5.3 Edit Channels  
GB23  
GB24  
GB24  
GB27  
GB30  
5.4 Edit Favourite Channels  
5.5 Channel Change Mode  
6. Programme Guide  
GB31  
**  
6.1 Viewing Programme Guide Information  
6.2 Finding a Programme  
GB31  
GB33  
GB34  
6.3 Viewing Reserved Programme  
**  
**  
**  
**  
GB 5  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Contents  
**  
7. Setting Preferences  
7.1 Parental Control  
GB36  
**  
GB36  
GB38  
GB39  
GB41  
GB41  
GB43  
GB43  
7.2 Language Setting  
7.3 Time Setting  
7.4 Schedule  
7.5 A/V Control  
7.6 UHF  
7.7 Miscellaneous  
8. Installation  
GB45  
**  
8.1 Antenna Setting  
8.2 Automatic Search  
8.3 Manual Search  
8.4 Other Search  
GB45  
GB48  
GB50  
GB52  
GB56  
GB63  
8.5 Motor Antenna  
8.6 Default Setting  
9. Software Upgrade  
9.1 OTA (Over the Air)  
9.2 S/W Upgrade from PC  
GB64  
**  
**  
**  
GB65  
GB68  
10. System Information  
GB69  
**  
10.1 Status  
GB69  
GB69  
10.2 Signal Detection  
11. Games  
**  
GB70  
GB71  
GB72  
12. Menu Map  
**  
13. Trouble Shooting  
**  
13.1 Trouble Shooting  
13.2 Error Message  
GB72  
GB73  
14. Specification  
GB74  
GB76  
GB77  
15. Glossary  
16. Service and Support  
**  
**  
**  
**  
GB 6  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
1. Before Using the Receiver  
**  
This chapter provides detailed instructions on the product and its accessories.  
**  
1.1 Package Contents  
Please check all package contents before using your receiver.  
**  
**  
**  
**  
Batteries (2)  
Remote Control Unit (1)  
User's Manual (1)  
**  
Note: Since faults may occur if the remote controller is being left without a battery for a long time, always  
keep the battery inserted in the remote controller.  
**  
**  
**  
**  
GB 7  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
1. Before Using the Receiver  
**  
1.2 Front Panel  
**  
**  
1. STANDBY Button  
**  
Switches between Operation and Standby modes.  
**  
2. TV/RADIO Button  
**  
Switches between TV and Radio.  
**  
3. CH - / CH +  
**  
Moves the TV/Radio channel up/down.  
**  
4. STANDBY LED  
**  
**  
**  
Red light is displayed when the product is in the Standby mode.  
Green light is displayed when the product is in operation.  
**  
5. TV LED  
**  
Green light is displayed when the receiver is in TV mode.  
**  
6. RADIO LED  
**  
Amber light is displayed when the receiver is in Radio mode.  
**  
**  
**  
**  
GB 8  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1.3 Rear Panel  
**  
**  
1. LNB IN  
**  
Connects a satellite antenna cable.  
**  
2. RS-232C  
**  
Connects to your PC to upgrade product's software programme.  
**  
3. TV SCART  
**  
Connects a TV SCART cable.  
**  
4. VCR SCART  
**  
**  
**  
Connects a VCR SCART cable.  
**  
5. AUDIO L/R  
**  
Connects to your TV or VCR and output Audio signals.  
**  
6. VIDEO  
**  
Connects to your TV or VCR and output Video signals.  
**  
7. S/PDIF  
**  
Outputs the digital audio signals (S/PDIF).  
**  
**  
**  
**  
GB 9  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
1. Before Using the Receiver  
**  
1.4 Remote Control  
**  
**  
**  
**  
**  
1. SOURCE  
6. ARROW BUTTONS  
11. G (GAME)  
12. STANDBY  
13. GUIDE  
14. EXIT  
16. FREEZE  
17. SUBTITLE  
18. V-/V+  
2. TV/RADIO  
3. NUMERICAL BUTTONS  
4. LIST  
7. OPT+ (OPTION)  
8. SOUNDTRACK  
9. CH-/CH+ and PAGE-/PAGE+  
10. MENU  
19. i (INFORMATION)  
20. MUTE  
5. BACK  
15. OK  
**  
**  
**  
**  
GB 10  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1. SOURCE  
11. G (Game)  
**  
**  
Selects the input source between TV and  
Displays the Game.  
**  
satellite receiver.  
**  
12. STANDBY  
**  
2. TV/RADIO  
Switches between Operation and  
**  
Switches between TV and Radio modes.  
Standby modes.  
**  
**  
3. NUMERICAL (0~9) BUTTONS  
13. GUIDE  
**  
**  
Enters a TV/Radio channel number or  
Displays the Programme Guide.  
**  
menu option number.  
**  
14. EXIT  
**  
4. LIST  
Exits the main menu or Guide screen.  
**  
**  
Displays the channel list.  
**  
15. OK  
**  
5. BACK  
Selects a menu, or confirms the selected  
operation. And displays the channel list  
**  
Returns to the previous menu and  
screen.  
during watching a programme.  
**  
**  
6. ARROW BUTTONS  
16. FREEZE  
**  
**  
Changes the channel or move the cursor  
Freezes the TV screen you are watching.  
to the up, down, left or right menu option.  
Play the audio continuously.  
**  
**  
7. OPT+ (OPTION)  
17. SUBTITLE  
**  
**  
Displays the channel attributes during  
Changes the subtitle language.  
**  
watching a programme.  
**  
**  
**  
18. V-/V+  
**  
8. SOUNDTRACK  
Adjusts the audio volume.  
**  
**  
Displays the Soundtrack.  
**  
19. i (INFORMATION)  
**  
9. CH-/CH+ and PAGE-/PAGE+  
Displays the information about the  
**  
Changes the Channel or Page.  
channel and programme.  
**  
**  
10. MENU  
20. MUTE  
**  
**  
Displays the main menu.  
Pauses the audio temporarily. That is,  
**  
volumes on/off temporarily.  
**  
**  
**  
**  
**  
GB 11  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
2. Setup  
**  
This chapter describes how to set up the receiver. Select the most appropriate procedure depending on your  
requirements.  
Note: If you encounter any problem when setting up the receiver, please contact your local product  
distributor.  
2.1 Connecting the Antenna  
1. Connecting TV and VCR  
**  
This is the most simple setup mode.  
**  
**  
**  
**  
2. Connecting Hi-Fi system 1  
**  
Connect the outputs on this receiver to corresponding inputs on your Hi-Fi system. (left audio out to left  
audio in, right audio out to right audio in)  
**  
**  
**  
**  
**  
GB 12  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
3. Connecting Hi-Fi system 2  
**  
If you wish to connect S/PDIFthe optical S/PDIF terminal and Dolby digital decoder to listen digital  
audio, connect as following.  
**  
**  
**  
**  
2.2 Powering On  
1. Connect the power cord of the receiver to a wall outlet.  
2. Power on by pressing the STANDBY  
button at Remote  
Controller.  
The Standby LED indicator is turned on Green.  
**  
**  
**  
**  
**  
GB 13  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
3. Installation Wizard  
**  
When powering on your receiver for the first time after purchasing, the Installation Wizard is automatically  
started.  
You can easily set-up using simple organisation and options, and watch the broadcasting after completing the  
set-up procedure. You can select items using the NUMERICAL (0~9) buttons.  
Note: If you select Back while running the Installation Wizard and then Press the OK  
or BACK  
button, you can return to the previous screen.  
3.1 Language  
You can select Menu, Audio, and the subtitled language.  
Select the appropriate language from the list using the  
button and  
press the OK  
button to save the selected language as a default  
language and move to the next step Antenna Setting .  
3.2 Area Setting  
**  
**  
You can select area.  
Select the appropriate area from the list using the  
button and  
press the OK  
button.  
3.3 Antenna Setting  
You can set the antenna's properties to watch the programme.  
1. Select the Satellite which the antenna points to. Press the OK  
or button to display Satellites List. Select Satellite using  
the  
button, and press the OK  
button.  
**  
**  
**  
**  
GB 14  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2. Set the LNB Frequency value  
Press the OK or button to display LNB Frequency List.  
Select LNB Frequency using the button, and press the  
OK button.  
If you cannot find the LNB Frequency value from the list, select  
User Define, manually enter the frequency using the  
NUMERICAL (0~9) button, and then press the OK  
button.  
Note: When using Universal LNB, select Universal for LNB  
Frequency which is 9750/10600 (MHz). Also, if you  
select Universal, 22KHz tone value is disabled.  
3. Set up 22kHz Tone.  
Select 22kHz Tone using the  
button, and press the OK  
or button to change the setting. When using 22kHz tone  
switch, select Enable. Otherwise, select Disable.  
4. Select DiSEqC switch.  
Select DiSEqC item using the  
or button to display DiSEqC Switch List.  
Select DiSEqC Switch using the button and then press the  
OK button.  
5. When you complete the setting, select Next using the  
button, and press the OK  
**  
**  
button and press the OK  
button to start Automatic Search.  
**  
Note:  
•
If the antenna is correctly set up, the level at signal strength bar and quality bar, which are located at  
the bottom of the screen, are generally moved up.  
•
If you encounter any problems or questions when setting up the antenna, please contact your local  
product installer or distributor.  
**  
**  
**  
**  
GB 15  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
3. Installation Wizard  
**  
3.4 Automatic Search  
You can automatically search for satellites according to the Antenna Setting.  
Please wait for finishing the Automatic Search. If you want to stop the  
Automatic Search, select the OK  
button.  
If the Automatic Search is stopped or finished, the selected result is  
automatically saved and go to the next step.  
3.5 Time Setting  
You can set the current time.  
Press the OK  
Select the appropriate GMT Offset value using the  
press the OK button to set the current time. Check the current time  
at the bottom of the screen to see if it's correctly set up. Then select  
or button to display the values for GMT Offset.  
button and  
**  
Next using the  
Installation Wizard.  
button and press the OK  
button to finish  
**  
**  
Warning: Press the EXIT  
button to save the previous input information and exit the Installation Wizard  
when running the Installation wizard. If you exit the Install Wizard without fully completing the  
setting procedures, you may not watch any broadcasting normally. In this case, you can use the  
Menu - Installation - Antenna Setting and Channel Search menu to configure your receiver as  
you like.  
**  
**  
**  
**  
GB 16  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Basic Operation  
**  
This chapter describes functions such as switching channel, volume control, and basic features for watching  
programmes.  
4.1 Switching Channel  
You can switch the current channel using one of the following methods.  
1. Press the CH-/CH+  
button.  
2. Enter your desired channel numeric using the NUMERICAL (0~9) buttons to move to the channel  
directly.  
3. Press the TV/RADIO  
button to switch between TV channel and Radio channel.  
Note: You can switch channel using Programme Guide or Channel List. Please refer to Chapter 5 and 6 for  
more information.  
4.2 Volume Control  
1. Press the V-/V+  
2. Press the MUTE  
buttons to adjust the audio volume.  
button to stop the sound temporarily.  
4.3 Motion Still  
**  
**  
Press the FREEZE  
button at remote controller to pause the current programme. Press the FREEZE  
button again to continue the programme.  
4.4 Change the Subtitle Language  
If the current programme provides Subtitle information, you can select the language for the Subtitle.  
1. Press the SUBTITLE  
button to display the subtitle language  
list.  
2. Select your desired subtitle language using the  
button, and  
press the OK  
button. Then the subtitle will be displayed in  
the selected language at the bottom of the screen.  
3. Select OFF from the subtitle language list not to display subtitle  
from the screen.  
Note: You can select a default subtitle language by selecting MENU - Preferences - Language Setting -  
Subtitle Language.  
**  
**  
**  
**  
GB 17  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Basic Operation  
**  
4.5 Change a Audio Language  
If the current programme is available in multiple audio languages, you can select the language that you wish  
to listen in.  
1. Press the SOUNDTRACK  
button to display soundtrack list.  
2. Select your desired audio language using the  
change Audio immediately.  
button to  
3. Select Audio Direction (left, right, stereo) using the  
button.  
Note:  
•
•
If the programme is Dolby digital one, you cannot set the audio direction such as left, right, and stereo.  
You can select your desired default audio language by selecting MENU - Preferences - Language  
Setting - Audio Language.  
•
If you select Dolby by selecting MENU - Preferences - Language Setting - Audio Priority, Dolby  
Digital programme is automatically broadcasted with Dolby digital audio without considering Default  
audio language.  
**  
**  
**  
4.6 Program Information (i-plate)  
Programme information is always displayed for a specific period of time whenever you switch channels. You  
can view the programme information by pressing the i  
button while watching a programme. Press the  
EXIT button to hide the I-plate.  
1. General Information  
The General Information is displayed as following on the screen.  
**  
**  
**  
**  
**  
GB 18  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1. Channel number and channel name  
2. Programme name  
3. Icons  
**  
Displayed only if this programme is reserved.  
Represents parental level. It indicates the minimum level of ages that the programme is  
targeted at.  
Displayed only when the channel is a locked channel.  
Displayed only when the channel is a scrambled channel.  
Displayed only when Subtitle information is available.  
Displayed only when there is any Teletext information.  
Displayed only when the programme is a Dolby Digital one.  
4. Current time  
5. Detail programme information: displayed if detailed programme information is provided.  
6. Signal strength and signal quality : indicates signal level.  
7. Satellite name or channel change mode : If you select All channels by selecting MENU - Edit  
channels - Channel Change Mode the Satellite name, which the current channel is belonged to, is  
displayed; if you select Within the current channel list, the channel list, which user selected, is  
displayed.  
**  
**  
8. Programme broadcasting time and progress bar: displays programme playing time and progress bar.  
9. Next programme Information : displayed if next programme information is provided. Press the button  
to display the next programme information.  
Note: If there is no available programme information, programme information is not displayed.  
2. Detail Programme Information  
You can see detailed information about the current programme. Press the i  
button where I-plate is  
displayed to view detailed information.  
**  
Note:  
•
•
Press the i  
button again to hide the information box.  
If the programme information is more than one page, use  
button to move to the previous or next page.  
**  
**  
**  
**  
GB 19  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Basic Operation  
**  
4.7 Option List  
You can view and confirm detailed information about the current channel and change the information in  
necessary.  
Note: Press the OPT+  
button when the channel list is displayed to view Option List. Then the following  
functions in the option list are performed to the current channel where cursor is located.  
1. Add a channel to favourite group.  
You can add current channel to the Favourite group immediately. Also, you can add a channel to multiple  
Favourite groups.  
1. Press the OPT+  
button.  
2. Select Favourite using the  
button, and press the OK  
or button.  
3. Select Favourite Group using the  
button and press the  
**  
**  
OK  
button to register for Favourite Group  
4. Press the OK  
button again on the selected Favourite Group  
to release the registered channel.  
5. Move to the parent menu using the button to save the changes  
automatically.  
Note: For detailed information about how to change Favourite Group's name and how to register Favourite  
Channel for the whole channels, refer to Chapter 5.  
**  
**  
**  
**  
GB 20  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2. Lock/Unlock a Channel  
**  
You can lock or unlock the current channel while watching a  
programme.  
1. Press the OPT+  
button.  
2. Select Lock using the  
button, and press the OK  
or  
button.  
3. Select Lock option using the  
button, and press the OK  
button.  
4. Select Unlock option using the  
button, and press the OK  
button.  
5. You will be prompted to enter your Password. Enter your  
password to unlock the channel.  
6. Move to the parent menu using the button to save the changes  
automatically.  
Note: When switching to the Locked Channel, you must enter  
the password to watch a programme.  
**  
**  
3. Delete a Channel  
You can delete the current channel while watching a programme.  
1. Press the OPT+  
button.  
2. Select Delete using the  
button, and press the OK  
or  
button.  
3. Select Yes in the confirmation message and press the OK  
button.  
4. Enter password using the NUMERICAL (0~9) buttons to delete  
the current channel and move to the next channel.  
**  
**  
**  
**  
GB 21  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Basic Operation  
**  
4. Channel Information  
You can display detailed information about the current channel while watching a programme.  
1. Press the OPT+ button.  
2. Select Information using the  
Information automatically.  
button to display Channel  
**  
The following information is displayed on the Information.  
1st Line  
2nd Line  
3rd Line  
4th Line  
5th Line  
Provider Name  
Satellite and CAS type  
Transponder Information for the channel (Frequency, Polarisation, Symbol rate, FEC)  
Video PID, Audio PID ,PCR PID (Packet Identification)  
Network ID (NID), Service ID (SID)  
**  
**  
**  
**  
**  
**  
**  
GB 22  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
5. Channel List  
**  
4 types of channel lists are provided for easy and quick channel searching.  
TV  
The list of all TV channels with 2 sub-groups: one is sorted by channel number, the  
other is sorted by channel name.  
Radio  
The list of all Radio channels with 2 sub-groups: one is sorted by channel number, the  
other is sorted by channel name.  
Favourite  
Satellite  
The list of the favourite channels with 5 sub-groups that you can organise channels by  
your private taste.  
The lists of channels classified by satellites. The result of Channel Search decides the  
number of sub-group.  
5.1 Displaying and Switching Channel List  
You can display channel list using LIST  
button and switch into  
other channel on the channel list.  
1. Press the LIST  
button while watching a programme to  
display the selected channel list.  
2. Select your desired channel using the  
button and press the  
OK  
button to change the channel.  
3. Enter the channel numeric directly using NUMERICAL (0~9)  
**  
**  
buttons to move cursor into your desired channel. And then press  
the OK  
button to change into the selected channel.  
4. Select On by going to MENU - Preferences - Miscellaneous -  
Option in Channel List to display scramble icon in the channel  
list.  
Select Off by going to MENU - Preferences - Miscellaneous -  
Option in Channel List to display only channel list without  
scramble icon.  
**  
Note:  
•
•
If there are multiple channels, press the PAGE-/PAGE+  
Whenever you press the TV/RADIO button while the channel list is displayed, the channel list will  
be switched between TV and Radio channel list.  
button to move by channel.  
**  
**  
**  
**  
GB 23  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
5. Channel List  
**  
5.2 Changing Channel List Group  
You can select channel list by group.  
1. Press the button while the channel list is displayed to view the  
group list.  
2. Select your desired channel group using the  
display its sub-groups.  
button to  
3. Press the OK  
or button, select your desired sub-group  
button, and then press the OK button.  
using the  
**  
4. The channel list for the selected sub-group is displayed.  
**  
**  
Note:  
•
The sub-group of Favourite channel list may exist or not depending on your configuration. And The  
sub-group of Satellite and Scramble channel list may exist or not depending on the result of Channel  
Search.  
•
If Within the current channel list option is selected from MENU - Edit channels - Channel Change  
Mode menu, you can only change programme within the selected channel list using the CH-/CH+  
while your watching a programme.  
5.3 Edit Channels  
You can edit all channels or each channel by channel list group.  
1. Press the MENU  
button.  
2. Select Edit Channels using the  
button, and press the OK  
or button.  
3. Select Edit Channel List using the  
button, and press the  
OK  
or button.  
**  
**  
**  
**  
GB 24  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
4. You will be prompted to enter your password. Enter your  
password using NUMERICAL (0~9) buttons.  
Note:  
•
Press the BACK  
MENU or EXIT  
or button to save the changes and return to the previous menu, press the  
button to exit the menu screen.  
•
You can easily navigate all menus using the assigned numeric for each menu. Press the MENU - 2 - 1  
in order at remote controller to select Edit Channel List menu.  
1. Select a Channel Group  
You can select the channel list group to edit. TV or Radio, and the sub-groups from the Channel Search for  
Satellite and Scramble Channel Lists are included as Channel List Groups.  
1. Press the OK  
or button in Group to display Channel List  
Group.  
2. Select your desired Channel List Group using the  
button,  
**  
**  
and press the OK  
button.  
**  
Note:  
•
Press the TV/RADIO  
channel list directly.  
button to move to TV or RADIO  
•
For editing Favourite channel list, move to MENU - Edit  
Channels - Edit Favourite Channels menu.  
2. Delete Channels  
You can delete one or more channels.  
1. Move the cursor to the channel list using the  
button.  
2. Select your desired channel, and then press the OK  
button  
to delete the channel(s). You can select multiple channels.  
3. Select Delete in the right using the button, and press the OK  
button.  
**  
**  
**  
**  
GB 25  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
5. Channel List  
**  
3. Lock/Unlock Channels  
You can lock or unlock one or more channels.  
1. Move the cursor to the channel list using the  
button.  
2. Select your desired channel, and then press the OK  
button  
to lock/unlock the channel(s). You can select multiple channels.  
3. Select Lock in the right using the button, and press the OK  
button.  
Note:  
•
Only if locked channel(s) is selected or all channels are locked,  
Lock is switched into Unlock. When you press Unlock, Locked  
channel is switched into Unlocked channel.  
•
Enter Password using the numerical button to watch Locked  
channel.  
**  
**  
4. Move Channels  
You can move one or more channels into your desired location, which changes the channel number  
accordingly.  
1. Move the cursor to the channel list using the  
button.  
2. Select your desired channel, and then press the OK  
button.  
You can select multiple channels.  
3. Select Move in the right using the button, and press the OK  
button. Then the selected channel(s) disappears from the  
channel list for a while.  
4. Move the cursor to the desired location in the channel list using  
the  
button, and press the OK  
button.  
5. The selected channel(s) is moved to the selected location in  
order.  
Note: Move is not available for Satellite or Scramble channel list.  
**  
**  
**  
**  
GB 26  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
5. Rename a Channel  
You can change the channel name as you like.  
1. Move the cursor to the channel list using the  
button.  
2. Select your desired channel, and then press the OK  
button.  
You can select only a single channel  
3. Select Rename in the right using the button, and then press  
the OK button.  
4. Enter a channel name directly using the keyboard displayed on  
the screen.  
5. When finishing entering channel name, select and press the OK  
button.  
**  
**  
6. Select/Unselect All Channels  
You can select/unselect all channels at a time.  
1. Select Select All in the right and press the OK  
2. Select Unselect All in the right and press the OK  
button to select all channels.  
button to unselect all the selected channels.  
5.4 Edit Favourite Channels  
You can edit Favourite channel or Favourite channel list.  
1. Press the MENU  
button.  
2. Select Edit Channels using the  
button, and press the OK  
button, and  
button.  
3. Select Edit Favourite Channels using the  
press the OK or button.  
**  
**  
**  
**  
GB 27  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
5. Channel List  
**  
Note:  
•
Press the BACK  
MENU or EXIT  
or button to save the changes and return to the previous menu. Press the  
button to exit the Menu screen.  
•
You can easily navigate all menu items using the assigned NUMERICAL (0~9) buttons for each menu.  
Press the MENU - 2 - 2 in order on the remote controller to select the Edit Favourite Channels menu.  
**  
The buttons for editing the Favourite channel list are described in the following table.  
**  
**  
Add  
Adds Favourite channel.  
**  
**  
Remove  
Removes from the Favourite channel.  
**  
**  
TV/Radio  
Switches between TV and Radio channel list.  
**  
**  
Fav.Group  
Changes Favourite channel list group.  
**  
**  
Move  
Moves the order of channel list within the Favourite channel list.  
**  
**  
Rename  
Renames the name of Favourite channel list.  
**  
**  
Sort  
Sorts channels by number or name in all TV/Radio channel list.  
**  
**  
Unselect All Unselect all the selected channel.  
**  
**  
**  
1. Add/Remove favourite channels  
You can add favourite channel(s) to a specific Favourite channel list or  
remove the added favourite channel(s) from the list.  
1. Select Favourite Group using  
2. Select your desired channel(s) in all TV/Radio channel list, and  
press to add Favourite channel(s).  
.
3. Select your desired channel(s) in Favourite channel list, and  
press to remove Favourite channel(s).  
**  
Note: You can switch between TV and Radio channel list using TV/Radio button or  
at remote controller.  
**  
**  
**  
**  
GB 28  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2. Move favourite channels  
You can move favourite channel(s) to your desired location within the Favourite channel list.  
1. Select Favourite Group using  
2. Select your desired channel to move within the Favourite channel  
.
list and press the OK button.  
3. Select , and press the OK  
4. Move the cursor to your desired location using the  
and press the OK button.  
button.  
button,  
5. The selected channel(s) is moved into your desired location you  
selected.  
3. Rename a favourite channel list  
You can rename Favourite channel list.  
1. Select Favourite group to rename using  
2. Select , and press the OK button.  
.
3. Enter the Favourite channel list name using the keyboard  
displayed on the screen.  
**  
**  
**  
4. When finishing entering the Favourite channel list name, select  
OK, and press the OK  
button.  
4. Additional Features  
Additional Features provides many useful functions which are necessary to add Favourite Channel.  
**  
Change between TV and Radio channel list  
You can add not only TV channel(s) but also Radio channel(s) to Favourite channel list. Press  
channel list into TV or Radio channels.  
to switch all  
**  
**  
**  
**  
GB 29  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
5. Channel List  
**  
Note: You can also change into TV or Radio channel by pressing TV/RADIO  
button at remote  
controller.  
**  
Select a favourite channel list  
You can select your desired Favourite channel list to edit. Press  
to  
display the Favourite channel list. Then select your desired channel list  
using the button, and press the OK button.  
Sort a channel list  
You can sort all TV or Radio channel lists by channel number or name for easy Favourite channel searching. If  
channel lists are sorted by channel number, is displayed. When you press this button, all the channel lists  
are sorted by name. Or, if channel lists are sorted by channel name,  
to order channels by number.  
is switched into  
. Press this button  
**  
Unselect all the selected channels  
Press  
button to unselect all the selected channel.  
**  
**  
5.5 Channel Change Mode  
You can change the channel either in the group or in the entire groups while watching a programme.  
1. Press the MENU button.  
2. Select Channel Change Mode using the  
press the OK or button.  
3. Select All Channels or Within Current Channel List using the  
button, and  
button, and press the OK button.  
Note: When Within the current channel list in Favourite Group option is selected, you can only change  
the channel within the current channel list. To change the channel in another channel list in which the  
current channel list is not located, change the channel list or select All channels option.  
**  
**  
**  
**  
GB 30  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
6. Programme Guide  
**  
The Programme Guide displays programme information about each channel, based on the date and time.  
You can also schedule your watching using the information given.  
6.1 Viewing Programme Guide Information  
You can view programme information for all channels.  
1. Press the GUIDE  
2. Move to previous or next programme within the same channel  
using the button.  
button.  
3. Move to other desired channel using  
button. If there are  
button to move to  
multiple channels, use PAGE-/PAGE+  
channels by page. Also, you can enter your desired channel  
number using the NUMERICAL (0~9) buttons at remote  
controller to move to the channel directly.  
4. Select your desired programme, and press the OK  
button.  
Then you can watch the programme if it is on air, or you can  
reserve it if it is the following programme.  
5. Press the i  
button in the selected programme to view  
Extended Information for the selected channel.  
1. Viewing Guide Information by Groups  
**  
**  
You can view programme information for desired channel list by groups.  
1. Press the GUIDE  
button.  
2. Press the Red button to display the channel list group.  
3. Select your desired channel list group using the  
display the appropriate sub-group.  
button to  
4. Move the cursor to the sub-group using the button, select your  
desired sub-group using the  
button.  
button, and then press the OK  
5. The Programme Guide for selected channel list is displayed.  
**  
**  
**  
**  
GB 31  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
6. Programme Guide  
**  
2. Viewing Programme Information Using Time Bar  
You can quickly search for your desired time zone using the Time bar.  
1. Press the GUIDE  
button.  
2. Press the Green button to display Time Bar.  
3. Select the each button using the  
button, and press the OK  
button to move as your desired amount of time. If you press  
the button repeatedly, the same operation is repeated.  
4. Each button functions as follows.  
Now  
Moves to the current programme where the cursor is located.  
Moves to the previous programme or 30 minutes before.  
Moves to the next programme or 30 minutes after.  
Moves to 2 hours before.  
Moves to 2 hours after.  
Day Moves to one day before.  
**  
**  
Day  
5. Select  
Moves to one day after.  
and press the OK  
button to exit the Time Bar.  
Note: Guide provides programme information from the previous day to the next 7 days.  
3. Reserving (Reserving a Watching)  
You can automatically reserve your desired programme by selecting the scheduled programme and pressing  
the OK  
button.  
1. Select the desired programme and press the OK  
button. The  
following message will be displayed.  
2. Select Yes and press the OK  
button to reserve the  
programme. When reservation has been completed, the  
displayed on the reserved programme.  
is  
3. Select No and press the OK  
button not to reserve the  
programme.  
4. If the channel is locked, parental controlled or restricted by  
watching time, you will be prompted to enter your Password.  
Enter your Password to complete the reservation.  
**  
**  
**  
**  
GB 32  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
6.2 Finding a Programme  
You can find your desired programme by programme name or genre easily.  
1. Press the GUIDE ( ) button.  
2. Press the Blue button to display Find screen.  
3. Enter the programme name directly using the keyboard displayed  
on the screen.  
4. When completing entering programme name, select the Find,  
and press the OK  
5. If you select your desired programme from the Results of Finding  
Programme screen and press the OK button, you can watch  
button.  
the programme if it is on air, or you can reserve your watching if it  
is scheduled(the following programme).  
**  
**  
6. Select By Genre and press the OK  
button to search  
button.  
programme by genre.  
7. Select your desired genre and press the OK  
8. As the result screen of Find Programme by Name, select your  
desired programme from the Results of Finding Programme  
screen and press the OK  
button to watch the programme  
immediately or reserve the watching.  
**  
Note: If you select Previous or Next on the Keyboard displayed on  
the screen and press OK  
button, the keyboard layout is  
switched.  
The results of the finding programme may differ depending on  
the provided programme information.  
**  
**  
**  
**  
GB 33  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
6. Programme Guide  
**  
6.3 Viewing Reserved Programme  
You can add or edit watching-reserved programme by viewing watching-reserved programme list.  
1. Press the GUIDE button.  
2. Press the Yellow button to display the Schedule screen.  
3. Select the scheduled programme and press the OK  
button  
to edit the reservation information.  
4. Select vacant list and press the OK  
button to add a new  
watching schedule.  
**  
**  
1. Editing Reserved Programme  
1. Change the reserved Start Time using the  
button and the  
button and the  
NUMERICAL (0~9) buttons.  
2. Change the reserved End Time using the  
NUMERICAL (0~9) buttons.  
3. Change the Repeat mode using the  
button. The options are  
button to delete the  
button to cancel the  
Once, Daily, and Weekly.  
4. Select the Delete and press the OK  
reserved programme.  
5. Select the Cancel and press the OK  
editing.  
6. Select the Save and press the OK  
button to complete the  
editing.  
**  
**  
**  
**  
GB 34  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2. Adding Reservation  
1. Enter your desired channel number using the NUMERICAL (0~9)  
buttons. The channel name is automatically displayed by channel  
number.  
2. Enter your desired Start Time using the  
button and the  
NUMERICAL (0~9) buttons.  
3. Enter your desired End Time using the  
button and the  
NUMERICAL (0~9) buttons.  
4. Select one of Repeat mode options among Once, Daily, and  
Weekly using the button.  
5. Select the Save and press the OK  
button to complete  
entering.  
6. Select the Cancel and press the OK  
button to cancel the  
reservation.  
**  
Note:  
•
•
You can reserve up to 20 programmes.  
If your desired programmed is already reserved or overlapped with Power Off time, adjust the  
reservation appropriately.  
**  
**  
•
If the channel is locked, restricted by watching time, you will be prompted to enter your Password to  
complete the reservation.  
**  
**  
**  
**  
GB 35  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
7. Setting Preferences  
**  
You can set censorship, watching time, and all other items suitable for your environment.  
Note:  
•
Press the BACK  
MENU or EXIT  
or button to save the changes and return to the previous menu. Press the  
button to exit the Menu screen.  
•
You can easily select any item from the menu using the NUMERICAL (0~9) buttons.  
**  
7.1 Parental Control  
You can set parental control for each programme and watching time. You can also change your Password.  
1. Press the MENU  
2. Select the Preferences using the  
OK or button.  
3. Select the Parental Control using the  
the OK or button.  
button.  
button, and press the  
button, and press  
4. When prompting message is displayed to ask Password, enter  
the Password using the NUMERICAL (0~9) buttons.  
**  
**  
1. Setting Censorship  
Censorship Classification allows you to block programmes according  
to the age level you have set.  
1. Select the Censorship Classification using the  
and press the OK or button.  
2. Select your desired Age Level using the  
the OK button  
button,  
button, and press  
**  
**  
**  
**  
GB 36  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
View All  
All programmes can be watched because there is no age limitation.  
Programmes are blocked under the age of 7.  
7
12  
Programmes are blocked under the age of 12.  
15  
Programmes are blocked under the age of 15.  
18  
Programmes are blocked under the age of 18.  
Lock All  
All Programmes are blocked without considering the age level.  
Note: You have to enter Password to watch the programme which is blocked by the age level.  
**  
2. Setting Allow Watch Time  
You can block programmes according to the watching time for all the  
channels.  
1. Select the Allow Time Control using the  
press the OK or button.  
2. Select Enable or Disable the Allow Time Control using the  
button, and press the OK or button.  
button, and  
**  
**  
Disable You can watch whenever you want regardless of  
Allow Time.  
Enable You can watch only while the time specified by  
Allow Time.  
3. When you have selected Enable, set the Start and End Time  
using the NUMERICAL (0~9) buttons, and press the OK  
button  
4. If you wish to cancel the entered time, select the Cancel button,  
and press the OK  
button.  
Note: Once the setting has been completed, you can watch  
programme only while the time specified by Allow Time. Or  
you should enter the Password to watch any programme  
during unspecified time.  
**  
**  
**  
**  
GB 37  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
7. Setting Preferences  
**  
3. Change Password  
You can change the existing Password into new one.  
1. Select Change Password using the  
OK or button.  
2. Enter New Password using the NUMERICAL (0~9) buttons, and  
press OK button.  
3. Enter the New Password again to confirm the Verify Password,  
and press the OK button.  
button, and press the  
Note: The Default Password is "0000". If you have forgotten your  
Password, please contact your local product distributor.  
7.2 Language Setting  
You can set Language for Menu, Audio, and Subtitle.  
1. Press the MENU  
button.  
2. Selec Preferences using the  
button, and press the OK  
or button.  
3. Select Language Setting using the  
button, and press the  
**  
**  
OK  
or button.  
1. Menu/Audio/Subtitle Language  
**  
You can set the language for Menu, Audio and Subtitle. Default language is English.  
1. Select Menu/Audio/Subtitle Language using the button.  
2. Press the OK or button to display the available Language List.  
3. Select your desired language using the  
button, and press the OK  
button.  
2. Audio Priority  
**  
You can selct the priority of audio.  
1. Select Audio Priority using the  
2. Presse the OK or button to display the Language or Dolby Digital option.  
3. Select your desired option and press the OK button.  
button.  
Language  
Watch programme in the selected language.  
Dolby Digital  
You can listen sound in Dolby Digital mode. However, it you select Dolby Digital,  
you cannot change the language.  
**  
**  
**  
**  
GB 38  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
3. Subtitle Display  
**  
You can select whether or not to display the Subtitle if provided.  
1. Select Subtitle Display using the button.  
2. Press the OK or button to display Auto or Manual option.  
3. Select your desired option and press the OK button.  
Auto Subtitles are displayed automatically in the predefined subtitle language.  
Manual Subtitles are displayed in the language when you select the subtitle language by  
pressing the SUBTITLE button at remote controller.  
**  
4. Subtitle Font  
**  
You can select the Subtitle font.  
1. Select Subtitle Font using the  
button.  
2. Press the OK  
or button to display the Variable or Fixed Font option.  
button.  
3. Select your desired option and press the OK  
Variable  
Uses the horizontally variable Subtitle Font.  
Uses the fixed Subtitle Font.  
**  
**  
Fixed Font  
7.3 Time Setting  
You can specify the current time and Power On/Off time.  
1. Press the MENU button.  
2. Select Preferences using the  
button, and press the OK  
or button.  
3. Select Time Setting using the  
button, and press the OK  
or button.  
**  
**  
**  
**  
GB 39  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
7. Setting Preferences  
**  
1. Setting Current Time  
You can set the GMT Offset for current time.  
1. Select GMT Offset using the  
button.  
2. Press the OK or button to display GMT list. GMT is  
changed by from 30 minutes to 1 hour.  
3. Select your desired item and press the OK  
button.  
Note: The current time is set automatically whenever GMT Offset  
changes.  
2. Power On Control  
You can set the time when the product is automatically powered on.  
1. Select Power On Control using the  
OK or button.  
2. Select either Enable or Disable the Power On Control.  
button, and press the  
Enable  
Uses the Power On Control and sets the  
Power On time.  
Disable  
Not uses the Power On Control.  
**  
**  
3. If Enable has been selected, enter the Channel No and Time  
using the NUMERICAL (0~9) buttons, and press the OK  
button.  
3. Power Off Control  
You can set the time when the product is automatically powered off.  
1. Select Power Off Control using the  
button, and press the OK  
or button.  
2. Select either Enable or Disable the Power Off Control using the  
button, and press the OK  
button.  
Enable  
Disable  
Uses the Power Off Control and sets the Power Off time.  
Not uses the Power Off Control.  
3. If Enable has been selected, enter the Time using the NUMERICAL (0~9) buttons, and press the OK  
button.  
Note: Once Power On/Off Control is specified, it is repeated everyday.  
**  
**  
**  
**  
GB 40  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
7.4 Schedule  
You can reserve a programme to watch programme at your desired time.  
1. Press the MENU button.  
2. Select Preferences using the  
button, and press the OK  
or button.  
3. Select Schedule using the  
button, and press the OK  
or button.  
4. Reserved Programme List is displayed on the screen. To edit  
the existing reservation, select your desired reservation, and  
press the OK  
button. To add a new reservation, select a  
blank list and press the OK  
button.  
Note: For detailed information about Schedule, refer to Chapter 6.3.  
7.5 A/V Control  
You can set Audio or Video Output Control.  
1. Press the MENU  
2. Select Preferences using the  
OK or button.  
3. Select AV Control using the  
button.  
button, and press the  
button, and press the  
**  
**  
OK  
or button  
1. TV - SCART  
**  
You can set TV SCART Output.  
1. Select TV-SCART using the  
button, and press the OK  
or button.  
2. Select one option among CVBS/RGB/S-Video using the  
button, and press the OK  
button.  
**  
**  
**  
**  
GB 41  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
7. Setting Preferences  
**  
2. VCR - SCART  
**  
You can set VCR-SCART Output.  
1. Select VCR-SCART using the  
button, and press the OK  
or button.  
2. Select one option among CVBS/S-Video using the  
button, and press the OK  
button.  
3. Screen Ratio  
You can set the aspect ratio of your TV.  
1. Select Screen Ratio using the  
button, and press the OK  
or button.  
2. Select one option from 4:3 or 16:9 using the  
button, and press the OK  
button.  
button. Namely,  
button, Screen Ratio is switched between 4:3 and 16:9.  
Note: If 2 options are provided, you can switch the option at a time using the OK  
whenever you press the OK  
4. Display Format  
You can select the Display Format according to TV Screen Ratio.  
1. Select Display Format using the button, and press the OK  
2. If the Screen Ratio is set to '4:3', you can select one from Auto/Letter box/Center box using the  
button, and press the OK button.  
3. If the Screen Ratio is set to '16:9', you can select one from Auto/Pillar box/Full mode using the  
button, and press the OK button.  
or button.  
**  
**  
5. TV Standard  
You can select the TV Standard: PAL or NTSC.  
1. Select TV Standard using the  
button, and press the OK  
or button  
2. Select one option among Auto/PAL/NTSC using the  
button, and press the OK  
button.  
AUTO  
PAL  
The TV supports both PAL and NTSC.  
The TV supports only PAL.  
NTSC  
The TV supports only NTSC.  
**  
**  
**  
**  
GB 42  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
6. NTSC Mode  
If TV Standard is set to NTSC, set the following mode.  
1. Select NTSC Mode using the  
button, and press the OK  
or button.  
2. Select one option from 3.58/4.43 using the  
button.  
Note: Only when TV Standard is set to Auto, set the NTSC mode.  
7. Audio Output  
Set the Audio Output.  
1. Select Audio Output using the  
button, and press the OK  
or button.  
2. Select one option form Stereo or Mono using the  
button.  
Note: When you select Mono, the sound is softer than Stereo.  
7.6 UHF  
**  
This receiver doesn't provide this function.  
**  
**  
7.7 Miscellaneous Settings  
1. Press the MENU  
button.  
2. Select Preferences using the  
button, and press the OK  
or button.  
3. Select Miscellaneous Settings using the  
press the OK or button.  
button, and  
**  
**  
**  
**  
GB 43  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
7. Setting Preferences  
**  
1. i-Plate Display Time  
**  
You can set the duration during which the Information box is to be displayed when you switch the channel.  
1. Select i - Plate Display Time using the button, and press the OK or button.  
2. Select a value between 0 ~ 20 seconds using the button, and press the OK button.  
Note: When it is set to '0', the i-Plate will not be displayed when you switch the channel.  
2. OSD Transparency  
**  
You can set the transparency of On Screen Display.  
1. Select OSD Transparency using the  
button, and press the OK  
or button.  
2. Select one option among Disable/25/50/75 using the  
button, and press the OK  
button.  
Disable  
Fully opaque screen  
As the number is bigger, the screen is more transparent.  
25, 50, 75  
3. Option in Channel List  
**  
You can set the option of scrambled icon in the Option in Channel List.  
**  
**  
1. Select the Option in Channel List using the  
2. Select one option from On/Off using the  
button, and press the OK  
button, and press the OK  
or button.  
button.  
On  
Off  
Scramble icon display in the channel list.  
Scramble icon disappear in the channel list.  
**  
**  
**  
**  
GB 44  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Installation  
**  
This chapter describes how to search for channels and a series of procedures.  
8.1 Antenna Setting  
You can set Antenna and LNB Information channel search. If antenna is  
not correctly set, you cannot search channel, therefore, you cannot  
watch a programme, either.  
1. Press the MENU  
button.  
2. Select Installation using the  
button, and press the OK  
or button.  
3. Password is required to use Installation Menu. Enter Password to  
directly move to Installation Menu.  
4. Select Antenna Setting using the  
button, and press the  
OK or button to enter Antenna Setting.  
Note: If no satellite is registered from Antenna Setting menu, Channel  
Search such as Automatic Search, Manual Search, Multiple  
Manual Search, Advanced Search is not available.  
**  
**  
**  
Satellite  
You can select satellite for Channel Search.  
1. Select Satellite using the  
button, and press the OK  
or  
button.  
2. Select one option that is the antenna heads for from the  
alphabetically sorted satellite list using the  
button, and  
press the OK button.  
3. If no desired satellite exists in the list, select User Define Satellite  
item. When you are prompted to select whether or not to edit  
User Define Satellite, select Yes, and press the OK to display  
keyboard to edit the Name. Enter Satellite Name directly, select  
OK and press the OK  
button.  
**  
**  
**  
**  
GB 45  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Installation  
**  
Satellite Alternative  
You can search and watch a programme by using the antenna headed for the selected satellite.  
1. Select Satellite Alternative using the button, and press  
the OK or button.  
2. Then, you can change into one of the following options.  
Disable Does not search the selected satellite.  
Enable Searches the selected satellite.  
Note: If there is no satellite that Satellite Alternative is set to Enable,  
Channel Search is not available.  
**  
LNB Frequency (MHz)  
You can enter LNB Frequency.  
1. Select LNB Frequency using the  
button, and press the  
OK  
2. Select one value from Universal ,9750,10600, 5150, 11475,  
User Define using the button. If you have selected User  
or button.  
Define, enter LNB Frequency value directly, and press the OK  
button  
**  
**  
Note: If you have selected Universal, select 9750/10600. In this case,  
the 22KHz tone value is disabled.  
**  
22kHz Tone  
You can select whether or not to use 22KHz Tone.  
1. Select 22kHz Tone using the  
button, and press the OK  
or button.  
2. Select whether or not to use 22KHz Tone using the  
button,  
and press the OK  
button.  
Enable  
Selects Enable if Dual LNB is used or 2  
antennas are connected to the 22kHz tone  
switch box.  
Disable  
Selects Disable if 22kHz Tone is not used.  
**  
**  
**  
**  
GB 46  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
DiSEqC Input  
You can select DiSEqC switch.  
1. Select DiSEqC Input using the  
or button.  
button, and press the OK  
Select the DiSEqC Swtich using the  
button, and press the  
OK  
button.  
You can select one option among Tone burst A~B, DiSEqC  
A~D, DiSEqC A~D for 2.0 and Disable.  
**  
LNB Voltage  
You can raise the LNB Voltage value (select High ) preparing for the distance between antenna and receiver  
is further than 60m.  
Caution: If your set the LNB Voltage value as High when the distance  
between antenna and receiver is close, the LNB may be  
damaged. Please be careful.  
1. Select LNB Voltage using the  
button, and press the OK  
or button.  
2. Set the LNB Voltage value using the  
button, and press  
**  
**  
the OK  
button.  
Standard  
If the distance between antenna and receiver is  
within 60m  
**  
High  
If the distance between antenna and receiver is  
further than 60m  
3. If you change the setting value to High a message will prompt  
you to confirm. Select Yes and press the OK button. When  
the value is set to High , 1V higher than LNB voltage is supplied  
to LNB.  
**  
**  
**  
**  
GB 47  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Installation  
**  
8.2 Automatic Search  
If you select the satellite to search channel according to the Antenna Setting, you can automatically search the  
satellite without entering any other information. And you cannot watch any programme without searching  
channel.  
1. Select MENU  
button.  
2. Select Installation using the  
button, and press the OK  
or button.  
3. Select Automatic Search from Installation menu using the  
button, and press the OK or button.  
**  
Satellite  
You can select which satellite to search the channel.  
1. Select Satellite using the  
button, and press the OK  
or  
button.  
2. Select one of satellites using the  
button.  
button, and press the OK  
**  
**  
Note: Channel Search is performed only for the satellites that have  
been set to Enable in Antenna Setting-Satellite Alternative menu.  
If you wish to search channels for satellites, which is not listed on  
the Satellite List of Automatic Search, move to Antenna Setting  
and set the Satellite Alternative item as Enable.  
**  
Search Type  
You can set Search Type to search by Free channel or CAS type.  
1. Select Search Type using the  
button, and press the OK  
or button.  
2. Select All and FTA using the  
button, and press the OK  
button.  
All  
Searches all channels.  
Searches only free channels.  
FTA  
**  
**  
**  
**  
GB 48  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
Channel Type  
You can search by TV or Radio channel.  
1. Select Channel Type using the  
button, and press the OK  
or button.  
2. Select one option among All, TV and Radio using the  
button.  
All  
Searches all channels.  
TV  
Search only TV channels.  
Searches only Radio Channel.  
Radio  
**  
Search  
**  
You can complete the setting and start searching.  
1. Select Search, and press the OK  
button to start Automatic  
Search.  
2. During operating search, the cursor is located at Stop. Therefore,  
if you press the OK  
button during searching, the operation is  
stop and the channels found until then will be displayed.  
3. If search operation is successfully completed, and the channel  
**  
**  
does not exist, press the OK  
button and try to reset the  
search operation again if necessary.  
4. You can delete unnecessary channels from the searched  
channels. Select your desired channels to delete and press the  
OK  
button. To delete all channels, select Select All to select all  
channels, select Delete, and press the OK button.  
button. Then select Delete and press the OK  
5. When completing Channel Search and deleting unnecessary  
channels, select Save to save the changes.  
**  
**  
**  
**  
GB 49  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Installation  
**  
8.3 Manual Search  
**  
You can search channels of the selected satellites by transponders if you know the Transponder information.  
1. Satellite  
Selects a satellite to search from the satellites set in Antenna setting.  
1. Select Satellite using the  
button, and press the OK  
or  
button.  
2. Select one of the Satellite names to search channel using the  
button, press the OK button.  
Note: If the satellite scheduled to search channel is not exist  
in the Satellite list, move to Antenna Setting menu, set  
Antenna for the Satellite, and then try again.  
2. TP  
Sets transponder value for the satellite  
1. Select TP using the  
button and press the OK  
or  
**  
**  
button.  
2. Select one value from the TP value using the  
button, and  
press the OK  
button.  
3. If you cannot find your desired Transponder information form the  
Transponder List, select User Define, and press the OK  
button to change the Transponder information as follows.  
**  
•
Enter Transponder frequency using the NUMERICAL (0~9)  
buttons.  
•
Select Polarization and press the OK  
or button to  
select one option among Auto/Horizontal/Vertical.  
Note: Horizontal outputs 18V, and Vertical outputs 13V  
through LNB line.  
**  
**  
**  
**  
GB 50  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
•
Select Symbol Rate (ks/s) and press the OK  
or button to  
select one Symbol Rate value from 27500/26000/22000. If your  
desired value does not exist, select User Define to enter Symbol  
Rate value directly using the NUMERICAL (0~9) buttons.  
•
•
Select FEC (Forward Error Correction) option and press the  
OK  
or button to select one option among Auto, 1/2, 2/3,  
3/4, 5/6, and 7/8.  
When completing entering Transponder information, select Done  
and press the OK  
button to finish entering User Define  
Transponder value.  
Note:  
•
For channel transponder information, you can find your desired information from Satellite channel  
magazine, Satellite channel related home pages, news release and home page of broadcasting  
company, etc.  
•
If you have correctly completed setting the Transponder information, Strength bar and Quality bar  
should represent as High. If the Level is close to 0, please try to reset.  
3. Network Search  
If your desired transponder provides the information of other transponder, you can determine whether or not to  
search the channel for other transponder.  
1. Select Network Search using the  
OK or button.  
button, and press the  
**  
**  
2. Select either Enable or Disable and press the OK  
Select Enable to run Network Search.  
button.  
**  
**  
**  
**  
**  
GB 51  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Installation  
**  
4. Search Type  
You can determine whether or not to search channel by free.  
1. Select Search Type using the  
button, and press the OK  
or button.  
2. Select one option among All and Free using the  
button,  
and press the OK  
button.  
All  
Searches all channels.  
Free  
Searches only Free Channel.  
5. Channel Type  
You can search by TV or Radio Channel.  
1. Select Channel Type using the  
button, and press the OK  
or button.  
2. Select one option among All, TV and Radio using the  
button.  
All  
Searches all channels.  
**  
**  
TV  
Searches only TV Channel.  
Searches only Radio Channel.  
Radio  
6. Search  
You can complete the setting and start searching.  
1. Select Search and press the OK  
button to start Manual Search.  
2. The next procedures are the same as those of Automatic Search. Please refer to Automatic Search.  
8.4 Other Search  
You can directly enter the Packet ID value or find how to search channel using the antenna for common use.  
1. Press the MENU  
button to run Menu.  
button, and press the OK  
2. Select Installation using the  
or button.  
or button. Press the BACK  
3. Select Other Search, and press the OK  
or button to return to  
the previous menu.  
**  
**  
**  
**  
GB 52  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1. Advanced Search  
**  
You can find your desired channel by entering Video, Audio and PCR Packet ID directly In Other Search  
Menu, select Advanced Search using the  
button, and press the OK  
or button to start Advanced  
Search.  
**  
Satellite, TP  
The setting for Satellite and TP is the same as that of Manual Search. Refer to the Satellite and TP setting for  
Manual Search.  
**  
Video PID, Audio PID, PCR PID  
You can enter the PID value for specific channel.  
1. Select the PID to set using the  
button, and press the OK  
or button.  
**  
Video PID  
Audio PID  
PCR PID  
Enter the Video PID value.  
Enter the Audio PID value.  
Enter the PCR PID value.  
2. Set PID value.  
**  
**  
Auto  
Search PID value automatically.  
Hexadecimal  
Enter PID value in Hexadecimal  
numeric.This chapter describes  
detailed instructions on the  
product and its accessories.  
Decimal  
Enter PID value in Decimal .  
3. When you have select Hexadecimal or Decimal, enter PID value  
directly using Keyboard.  
4. When completing entering PID value, select OK, and press the  
OK  
button.  
**  
Search  
You can complete setting and start searching.  
1. Select Search and press the OK  
button to start Advanced Search.  
2. The next procedures are the same as those of Automatic Search. Please refer to Automatic Search.  
**  
**  
**  
**  
GB 53  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Installation  
**  
2. SMATV Search  
If your receiver uses the antenna for common use, operate SMATV Search. For SMATV Search, Channel  
Search is performed by the antenna for common use regardless of the setting value in Antenna Setting.  
Select SMATV Search in Other Search Menu using the  
button, and press the OK  
or button.  
Frequency  
1. Select Frequency using the  
button, and press the OK  
or button.  
2. Enter the down converted frequency through common LNB. You  
can enter the frequency between 950 and 2150 MHz.  
**  
Polarisation  
1. Select Polarisation using the  
or button.  
2. Select one from Disable/Auto/Horizontal/Vertical and press the  
button, and press the OK  
OK button.  
**  
**  
Note: Horizontal outputs 18V, and Vertical outputs 13V through LNB  
line. Select Disable when LNB Power is not necessary.  
**  
Symbol Rate  
1. Select Symbol Rate using the  
or button.  
button, and press the OK  
2. Select the symbol rate of the transponder.  
If the rate does not exist in the List, select User Define and enter  
the value directly.  
**  
**  
**  
**  
GB 54  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
FEC  
1. Select FEC using the  
button.  
2. Select one option among Auto, 1/2, 2/3, 3/4, 5/6, 7/8, and press  
button, and press the OK  
or  
the OK button.  
**  
Search  
You can complete setting and start searching.  
1. Select Search and press the OK  
button to start SMATV Search.  
2. The next procedures are the same as those of Automatic Search. Please refer to Automatic Search.  
3. Multiple Manual Search  
If you wish to search multiple Transponder at the same time, you can run Multiple Manual Search. This  
function is useful when repeating Manual Search.  
1. Select Multiple Manual Search from Other Search Menu using  
the  
Multiple Manual Search.  
2. Select one option among Satellite, Edit TP List, Search Type,  
button, press the OK  
or button to enable the  
**  
**  
Channel Type using the  
button, and press the OK  
or  
button.  
3. Set the selected item.  
Note: Settings for Satellite, Search Type, and Channel Type are the same as those of Manual Search.  
Refer to Manual Search.  
**  
**  
**  
**  
GB 55  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Installation  
**  
Edit TP List  
You can edit TP list to search at a time and change the setting for Transponder.  
1. Select Edit TP List from Multiple Manual Search, and press the  
OK  
or button.  
2. Select Add and press the OK  
button to add a new  
Transponder data.  
3. Select a specific TP from the Transponder list, press the OK  
button, select Edit, and then press the OK button to edit  
Transponder data.  
4. Select a specific TP from the Transponder list, press the OK  
button, select Delete , and then press the OK  
button to  
delete Transponder data. You can select multiple TPs to delete.  
5. When completing configuring Transponder list, press the BACK  
button to return to parent menu. Select Yes and press the  
OK  
button to confirm to save before moving.  
Note: When you select Default List and press OK , Transponder list  
display.  
**  
**  
**  
8.5 Motor Antenna  
If you use Motor Antenna, which is operated by motor, you should set the antenna as Motor before Channel  
Search.  
1. Press the MENU  
button.  
2. Select Installation using the  
button, and press the OK  
button, and press the  
or button.  
3. Select Antenna Setting using the  
OK  
or button.  
4. Press the OPT+  
button on the Antenna Setting screen to  
switch into Motor Antenna Menu.  
**  
**  
**  
**  
**  
GB 56  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1. Motor Type  
You should set the Motor Type before Motor Antenna Setting.  
1. Select Motor Type from Motor Antenna, and press the OK  
or button.  
2. Set LNB Frequency.  
**  
•
Select LNB Frequency using the  
OK or button.  
button, and press the  
•
•
Enter LNB Frequency value using the NUMERICAL (0~9)  
buttons.  
When completing entering LNB Frequency, press the OK  
button.  
3. Set LNB Voltage  
**  
Refer to Installaion - Antenna Setting - LNB Voltage. The  
distance between antenna and receiver is 30 m instead of 60 m.  
4. Select Motor Type using the  
button, and press the OK  
or button to select Motor Type.  
DiSEqC1.2  
USALS  
General Motor Antenna using DiSEqC 1.2  
Motor Antenna using USALS  
**  
**  
5. Set My Longitude.  
**  
•
Select My Longitude using the  
button, and press the  
OK or button to select Motor Type.  
•
Enter Longitude value using the NUMERICAL (0~9)  
buttons.  
•
•
Set East/West using the  
button.  
When completing setting, press the OK  
button.  
6. Set My Latitude.  
**  
•
Select My Latitude using the  
or button.  
Enter Latitude value using the NUMERICAL (0~9) buttons.  
Set North/South using the button  
When completing setting, press the OK  
button, and press the OK  
•
•
•
button.  
**  
**  
**  
**  
GB 57  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Installation  
**  
2. Edit Satellite Data  
You can set the position of the Satellite, which the Motor Antenna heads for, and decide whether or not to use  
the satellite.  
1. Select Edit Satellite Data from Motor Antenna Menu using the  
button.  
2. Move to Edit Satellite Data by pressing the OK  
button.  
3. Select Satellite using the  
button, and press the OK  
button.  
4. Select a satellite to edit, and press the OK  
button.  
5. Select Satellite Alternative using the  
button and press the  
OK  
button to decide whether or not to use the selected  
Satellite.  
**  
Enable  
Disable  
Currently selected satellite is listed on Motor  
Setting. Channel Search is available.  
Currently selected Satellite is regarded as out of  
existence. Channel Search is unavailable.  
**  
**  
6. Select Satellite Longitude using the  
OK button.  
7. Enter the Longitude value for Satellite using the NUMERICAL  
button, and press the  
(0~9) buttons. Change East/West value using the  
button.  
**  
**  
**  
**  
GB 58  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
3. Motor Setting  
You can set Motor Antenna for Channel Search and watching.  
1. Select Motor Setting from Motor Antenna using the  
button, and press the OK  
or button.  
2. Select Satellite.  
**  
•
Select Satellite using the  
button, and press the OK  
or button.  
•
•
Move the Motor to select which satellite the Antenna heads  
for.  
Press the OK  
button.  
Note: The satellite is displayed in the Satellite List only if the  
satellites have been set to Enable in Satellite  
Alternative item of Edit Satellite Data menu. For  
detailed information about setting Satellite Alternative  
item, refer to the instruction about Edit Satellite Data.  
3. Select TP using the  
button, and press the OK  
or  
button.  
4. Set Motor Driving.  
**  
•
Select Motor Driving using the  
OK or button.  
button, and press the  
**  
**  
•
•
Select Motor Driving Type, and press the OK  
button.  
Continuous: Motor moves continuously.  
Step Motor moves by specified unit.  
Time Motor moves during specified time.  
•
Adjust Driving Size using the  
Step by Impulse  
button.  
Time by Second  
•
Select OK , and press the OK  
button.  
5. Move the Antenna to the position of the selected Satellite.  
**  
•
•
Select Go to Stored Position using the  
button.  
Press the OK button to move Antenna to the position of  
the Satellite. Please wait during the Antenna is moving.  
**  
**  
**  
**  
GB 59  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Installation  
**  
6. Confirm Signal Strength and Quality Level and fine-tune the  
Antenna direction.  
**  
•
•
Select Go to Stored Position using the  
button.  
/ button.  
Move the Antenna to East/West by pressing  
Adjust Signal Level to maximum.  
7. Save the adjusted position of Satellite.  
**  
•
•
Select Store Current Position using the  
Press the OK button to save the Antenna position  
headed for the selected Satellite.  
button.  
8. You can set antenna position by satellite by repeating the above  
procedure.  
9. You can recalculate positions for all other satellite based on one  
satellite. Adjust position of antenna by satellite based on one set  
position without setting each position of antenna by satellite.  
**  
•
•
•
Select Recalculation using the  
Press the OK button.  
button.  
To adjust all positions again, select Yes and press the OK  
button.  
Note: If you select Recalculation with selecting Reference for Satellite  
option, the antenna is reset to default.  
**  
**  
**  
**  
**  
**  
**  
GB 60  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
4. Installer Menu  
You can set default setting and operation limit for Motor Antenna.  
1. Select Installer Menu from Motor Antenna Menu using the  
button.  
2. Press the OK  
button to move to Installer Menu.  
**  
Motor Limit Setting  
You can set the maximum Motor Limit both East and West to prevent damage to the antenna.  
1. Select Motor Limit using the button.  
2. Set Motor Limit to Disable by pressing the OK  
or button.  
**  
Enable  
Time  
Motor Limit is already set. Motor does not move  
more than the amount of limit.  
Motor Limit is disabled. Setting is released.  
Note: When newly setting Motor Limit, set the value to Disable.  
3. Select Limit Position using the button.  
4. Select the Direction of Limit by pressing the OK  
or  
button.  
**  
**  
**  
East  
Motor sets East limit to move.  
Motor sets West limit to move.  
West  
5. Select Set Limit using the  
6. Move antenna to the Limit Position to set using  
7. Press the OK button to set Limit.  
button.  
button.  
8. If Limit is set, Motor Limit option is automatically changed into  
Enable.  
**  
**  
**  
**  
GB 61  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Installation  
**  
Reset Position  
You can restore the position saved at Motor Antenna to the default setting.  
1. Select Reset Positions using the  
2. Press the OK button.  
3. Select Yes and press the OK  
button.  
button to restore all saved  
value at Motor Antenna to the default setting.  
4. Please wait during the Motor Antenna is restored.  
Note: Motor Antenna may not be reset depending on Antenna  
condition. In this case, please repeat the above procedure again.  
**  
**  
**  
**  
**  
**  
GB 62  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
8.6 Default Setting  
Default Setting restores the receiver to the default settings  
Warning: Please note that once you perform Default Setting, all data such as Antenna Setting  
information Channel List, and User Configured data are deleted.  
To perform Factory Default:  
1. Press the MENU  
button.  
2. Select Installation using the  
button, and press the OK  
or button.  
3. Enter PIN using the NUMERICAL (0~9) buttons.  
4. Select Default Setting using the  
button, press the OK  
button to restore all settings to  
or BACK button to return  
or button.  
5. Select Yes and press the OK  
Factory Default.  
Select No and press the OK  
to the previous menu.  
6. Confirm again to start loading default setting. Enter PIN using the  
NUMERICAL (0~9) buttons to perform restoring.  
**  
**  
7. When completing the default setting, press the OK  
button to  
automatically run the Installation Wizard. When default setting  
is completed, Installation Wizard is automatically displayed,  
which helps Channel Search. For detailed information about  
Installation Wizard, refer to 3. Installation Wizard.  
**  
**  
**  
**  
GB 63  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
9. Software Upgrade  
**  
In order to maintain proper performance of this product, it is essential to have the most up-to-date software.  
The latest news and release of software versions may be found at the Humax website -  
http://www.humaxdigital.com.  
It is recommended that you periodically check for the availability of software upgrades.  
9.1 OTA (Over the Air)  
OTA, an abbreviation of over-the-air , means that downloads the software can be downloaded where the  
manufacturer reserves the right to decide when and where to release through Antenna system.  
Over the Air (OTA) is simply an alternative method for downloading software versions. However, the  
manufacturer reserves the right to decide when and where this software update can take place by beaming  
latest software versions over the air via antenna systems. Note that OTA is only limited to certain geographical  
regions mainly due to different antennas having different footprints(area where the signal can be received).  
The software update via satellite system will only occur under the following circumstances.  
**  
1. The equipment should have appropriate loader software.  
Caution: Please note that if you don't have normal loader software, the equipment may not  
be updated or work after software update.  
2. The manufacturer decides to release software downloading via a designated antenna system  
3. The equipment must be tuned properly to the same antenna that the manufacturer uses.  
4. Upgrade software when the quality of receiving signal strength is high. If the weather is not so good  
that the quality of receiving signal strength is not recommendable, perform the software upgrade later.  
**  
**  
**  
Caution:  
•
Please be careful to keep the power on and the power cord plugged in during software update.  
If the power is off during software update, it may cause fatal damage to the product.  
•
Please be careful not to pull out the Signal line (LNB Cable) during software update. Update may be  
interrupted and the product may not work.  
Note:  
•
•
•
The product cannot work at all during software update.  
It may take 5 ~10 minutes to update software.  
Scheduling operation cannot work during software update.  
**  
**  
**  
**  
GB 64  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1. If new software is found when powering on  
1. A message will be displayed to notify that new software is found.  
2. Select Yes and press the OK  
button to update the software.  
3. Starts downloading new software. Please wait until the updated Is completed.  
4. When completing the software update, the equipment is automatically powered off and on again.  
**  
2. If updating software from Menu  
1. Press the MENU  
button.  
2. Select Installation using the  
button, and press the OK  
or button.  
3. Enter Password using the NUMERICAL (0~9) buttons.  
4. Select Software Update using the button, and press the  
OK or button.  
**  
If new version of software is detected during watching a programme  
**  
**  
1. A message will be displayed to notify that new software is found.  
2. Select Yes and press the OK  
button to start upgrading. Select  
No and press the OK  
button to return to the previous menu.  
**  
**  
**  
**  
GB 65  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
9. Software Upgrade  
**  
If using Automatic Update  
You can set the product to find HUMAX software update site and update software automatically.  
1. Select Automatic from Software Update Menu screen using the  
button, and press the OK  
or button.  
2. Automatically search for new software. Select Stop and press  
the OK button to finish Search.  
3. When detecting update software, the following result is displayed.  
If new software is not found by Automatic, use Manual Update.  
4. Select Yes and press the OK  
button to start updating. Select  
No and press the OK  
without updating.  
button to return to the previous menu  
**  
**  
5. When completing the software update, the product is  
automatically powered off and on again.  
**  
Note: Software Update Sites of HUMAX are listed in the following table.  
Satellite  
Astra1  
Transponder data  
12669 (V) 22000 5/6  
12054 (V) 27500 3/4  
11811 (H) 27500 3/4  
11765 (H) 27500 3/4  
11623 (V) 27500 3/4  
Sirius  
Hispasat  
Nilesat  
Hotbird  
**  
Among the Software Update Sites of HUMAX, the software search operation is performed only for the  
satellites that have been set to Enable in Installation -Antenna Setting-Satellite Alternative menu and that  
have all other Antenna Setting correct.  
**  
**  
**  
**  
**  
GB 66  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
Manual Update  
You can perform Manual Update only if you know which satellite has new software and the Transponder  
information correctly.  
1. Select Manual from Software Update Menu screen using the  
button, and press the OK  
or button.  
Select the the Satellite which provides update software. Satellite  
list contains the satellites that have been set to Enable in  
Installation -Antenna Setting-Satellite Alternative menu. For  
unlisted satellite, start with Antenna Setting.  
2. Enter Transponder Frequency in which updated software is  
provided.  
3. Enter Polarisation value.  
4. Select Symbol Rate value. If it is not found in the List, select  
User Define and enter manually.  
5. Select FEC value.  
Note: How to setting Satellite and Transponder for Manual Update  
Sites is the same as how to edit User Define Transponder data in  
Manual Search. Refer to Manual Search.  
6. Select Search and Press the OK  
button to search software.  
**  
**  
7. It is displayed whether or not New Software exists.  
If new software does not exist, press the OK  
button to return  
to the Manual Update Menu.  
8. Select Yes and press the OK  
button to start updating. Select  
No and press the OK  
button to return to the previous menu.  
9. Performs Software Update. Please wait until it is completed.  
10. When completing the software update, the product is  
automatically powered off and on again.  
**  
**  
**  
**  
GB 67  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
9. Software Upgrade  
**  
9.2 S/W Upgrade from PC  
**  
You can connect your receiver to the PC directly and upgrade your software by transferring the new software  
from the PC. Follow these steps to download new software from PC to this product.  
1. Download new software file (PDF files) equivalent for this product model from our website into your  
computer (http://www.humaxdigital.com).  
2. Download and install download tool file from our website into your computer.  
3. Connect your PC to this product with RS-232C serial cable.  
4. Execute installed download tool, and then follow the instructions contained the download tool.  
5. Press the STANDBY  
button to make this product operating.  
**  
**  
**  
**  
**  
**  
**  
GB 68  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
10. System Information  
**  
You can view all system information, signal strength, and Common Interface information.  
1. Press the MENU  
button.  
2. Select System using the  
button, and press the OK  
or  
button.  
10.1 Status  
You can view System information  
1. Select Status using the  
button, and press the OK  
or  
button.  
2. Confirm the information about Hardware version, Software  
version, Loader version,Update Date, and System ID.  
**  
**  
10.2 Signal Detection  
You can view the signal strength and signal quality receiving from satellite via your satellite dish.  
1. Select Signa Detection using the button, and press the  
OK or button.  
2. Display information about the satellite and transponder, which  
current channel belongs to and the graphs and percentage of  
Signal Strength and Quality of the channel.  
**  
**  
**  
**  
GB 69  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
11. Games  
**  
This product provides various games for user's entertainment.  
1. Press the MENU  
2. Select Game using the  
3. According to the instruction displayed on screen, you can enjoy the game using  
OK button.  
button.  
button, and press the OK  
button.  
and  
**  
Note: Press the EXIT  
or BACK  
button to exit the game.  
**  
**  
**  
**  
**  
**  
GB 70  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
12. Menu Map  
**  
**  
**  
**  
**  
**  
**  
GB 71  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
13. Trouble Shooting  
**  
13.1 Trouble Shooting  
Before contacting your local service, please make sure following instructions. If the product does not work  
normally after completing the following trouble shooting, please contact your local product distributor or  
service centre.  
**  
1. No message is displayed on the front panel or product has no power.  
**  
- Check the main power cable and check that it is plugged into a suitable power outlet.  
- Check whether the Power Switch is On.  
2. No picture  
**  
- Make sure that the product is in Operation Mode.  
- Make sure that the AV Cable is firmly connected to the TV.  
- Make sure that Antenna line is correctly connected to the equipment.  
- Make sure that Antenna Setting is correct.  
- Check the brightness level of TV.  
- Check the channel is on air.  
3. Poor picture and sound quality  
**  
- Install the antenna in a place where there is no obstacle.  
- Make sure there is no mobile phone or microwave oven near the equipment.  
ꢀ ꢁꢂꢃ ꢄ ꢅ ꢆꢇꢈꢉꢊꢈꢋ ꢆꢈꢌꢋꢃ ꢍꢇ ꢆꢇꢎꢎꢃꢆꢍꢊꢎꢏ ꢐꢑ ꢈꢎꢒ ꢈꢎꢍꢃꢎꢎꢈꢓ  
- Keep the product and the antenna cable for satellite far away from each other.  
- Make sure the receiving level, and adjust antenna if the level is low. The receiving level can be influenced by  
weather.  
Note: If the CS Antenna is covered with snow or the RF is weaken by heavy rain, sound and picture may  
temporarily be poor. However, these poor sound and picture quality because of weather conditions  
cannot be not accepted as a malfunction of equipment.  
**  
**  
- Change satellite dish into bigger one if satellite dish is small.  
- Replace LNB with the one with low noise factor if the noise factor is high.  
- Replace LNB with new one if it is damaged or out of order.  
4. No or poor sound  
**  
- Check the volume level of the TV and Receiver.  
- Check the Mute status of the TV and product.  
- Press the Audio button to change the Sound Track type.  
5. Remote controller does not operate  
**  
- To control the equipment with the remote controller, the remote controller's top end should directly point towards  
the receiving part of receiver's remote controller.  
- Check the battery of Remote controller.  
6. Reservation is unavailable  
**  
- Check whether it it not overlapped with other reservation.  
- Check whether the power switch is off.  
**  
**  
**  
**  
GB 72  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
13.2 Error Message  
Error message  
Possible causes  
What to do  
No or bad signal  
The satellite dish is not pointing at the  
satellite.  
Adjust dish.  
**  
Increase the LNB voltage or connect a  
signal amplifier.  
Signal too weak.  
**  
Satellite dish is too small.  
Change to a large dish.  
Change the LNB.  
LNB is faulty.  
Wrong antenna setting.  
Set the antenna correctly  
The channel is not The channel has signal, but no audio or Confirm if the channel is currently on air  
available.  
video.  
The channel is not deleted by  
broadcasting company.  
The channel is for data broadcasting.  
(Cannot watch the channel in usual  
way.)  
The audio is not  
available.  
The channel has signal, but no Audio.  
Press the Audio button to confirm if the  
channel has Audio.  
**  
**  
LNB short  
LNB cable is shorten.  
Replace LNB Cable.  
Replace LNB.  
LNB is internally shorten.  
LNB In Port is inserted by alien  
substance or damaged.  
Remove the alien substance and contact  
local service center if it is damaged.  
**  
**  
**  
**  
GB 73  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
14. Specification  
**  
ꢀꢁꢂꢃꢄ ꢅꢆꢇꢂꢂꢃꢈ  
Input Connector  
Frequency Range  
Input Impedance  
F-type, IEC-169-24, Female  
950MHz to 2150MHz  
ꢄ ꢔ  
Signal Level  
-20 to -75dBm  
LNB Power & Polarisation  
Vertical: +13.5V (+14.5V at high voltage)  
Horizontal: +18V (+19V at high voltage)  
Current: 500mA Max. Overload Protection  
22kHz Tone  
Frequency: 22±4kHz Amplitude: 0.6±0.2V  
DiSEqC Control  
Demodulation  
Input Symbol Rate  
FEC mode  
Version 1.0/1.2 Compatible, USALS  
QPSK  
1~45 Ms/s  
Convolutional Code Rate 1/2, 2/3, 3/4, 5/6 and 7/8  
with Constraint Length K=7  
**  
**  
ꢉꢊꢋꢌ ꢀꢄꢇꢂꢍꢎꢏꢄꢐ ꢑꢐꢄꢃꢇꢒ ꢓꢔꢕ ꢖꢃꢗꢏꢘꢙꢂꢚ  
Transport Stream  
MPEG-2 ISO/IEC 13818  
Transport Stream Specification  
Profile Level  
Input Rate  
MPEG2 MP@ML  
15 Mbit/s Max  
Aspect Ratio  
Video Resolution  
Audio Decoding  
Audio Mode  
4:3, 16:9 , Letter box  
720x576, 720x480  
MPEG/MusiCam Layer I & II  
Single channel/Dual channel/Joint  
Stereo/Stereo  
Sampling  
32, 44.1 and 48kHz  
**  
**  
**  
**  
GB 74  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
ꢉꢃꢒꢏꢄ  
Flash Memory  
2M byte  
Graphic (MPEG) & System DRAM  
EEPROM  
8M byte  
8K byte  
ꢓꢔꢕ ꢖꢇꢐꢇ !ꢂꢔ"ꢁꢐ  
Video  
RCA/SCART Video Output (CVBS, S-Video)  
Audio R/L  
RCA/SCART Volume and Mute Control  
(Resolution: 20 bits DAC, MAX, 2Vrms)  
S/PDIF  
Digital Audio Output, Fiber-Optic (Resolution: 20  
bits)  
RS-232C  
Transfer Rate:115,200bps, 3 pin Socket type  
ꢊꢏ#ꢃꢄ ꢑꢁꢎꢎꢈ  
Input Voltage  
Type  
90~250V AC, 50/60Hz  
SMPS  
**  
**  
Power Consumption  
Stand by Power  
Max. 30W  
ꢕꢖꢗ  
Protection  
Separate Internal Fuse.  
The input should be protected against lighting  
ꢊꢆ ꢍꢙꢗꢇꢈ ꢑꢎꢃꢗꢙ$ꢙꢗꢇꢐꢙꢏꢂꢍ  
Size  
260 * 50 * 180 mm  
Around 1.35 Kg  
Weight (Net)  
Operating Temp  
Storage Humidity  
0°C to + 45°C  
5% ~ 95% RH (Non-Condensing)  
**  
**  
**  
**  
GB 75  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
15. Glossary  
**  
DiSEqC (Digital Satellite Equipment Control)  
A standard through which it is possible to let a DiSEqC compatible receiver send a signal over the RF cable to  
a switching device to switch between different LNBs or dishes. The DiSEqC uses the 22KHz signal to control  
the switching device.  
**  
Programme Guide (Electronic Programme Guide, EPG)  
A electronic program guide (EPG) that comes with the broadcast to a particular satellite, note that every  
station fills the EPG differently or not, so differences in the EPG are not necessarily receiver errors.  
**  
Frequency  
The number of cycles or events per one second, which is expressed in the unit of hertz  
**  
FTA (Free-To-Air)  
An unscrambled broadcast, which you can view without additional payments to a service provider.  
**  
Hi-Fi (High Fidelity)  
The characteristics of audio devices that can play back all the audio frequencies of the human, which is the  
range of 16Hz~20KHz, uniformly from the low frequency to high frequency. Sometimes it is used to indicate  
good quality of an audio device such as stereo tape recorder.  
**  
LNB (Low Noise Block)  
An electronic unit mounted on the satellite dish. It receives the signals reflected by the dish and converts them  
to signals that can be used by this product.  
**  
**  
**  
OSD (On Screen Display)  
The function that displays the information about the monitor that the user needs or has to know on the screen  
directly. OSD information includes brightness, contrast, tuning, RGB adjustment, and screen size and  
positions (top, left, width, and height), and so on.  
**  
OTA (Over The Air)  
Means that software downloads where the manufacturer reserves the right to decide when and where to  
release them through satellite system.  
**  
**  
SCART  
A 21-pin connector used for connection of this product, VCR and TV. Also called Euroconnector or Peritel  
connector.  
**  
S/PDIF (Sony/Philips Digital Interface format)  
Standard format for digital audio output. It outputs audio signals directly as digital audio signals without  
changing into analog signals because conversion into analog signals can degrade signal quality.  
**  
Transponder  
An automatic device that receives amplifies and retransmits a signal on a different frequency.  
**  
**  
**  
**  
GB 76  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
16. Service and Support  
**  
You can get information such as a troubleshooting guide, software upgrades and product support guide from  
the following web sites and call center (Hotline).  
Please try to contact to your local dealers first when you have any problem.  
Web site and e-mail  
Homepage  
http://www.humaxdigital.com  
English  
Deutsch  
Arabic  
http://www.humaxdigital.com/Deutsch/  
http://www.humaxarabia.com  
**  
HCSA (Humax Customer Service Area)  
Software Download, Information and Technical Q&A  
http://www.humaxdigital.com/hcsa/  
English  
http://www.humaxdigital.com/Deutsch/hcsa/  
Deutsch  
**  
E-mail (Technical Q&A)  
**  
**  
[email protected]  
[email protected]  
Europe & North Africa  
Germany  
[email protected]  
[email protected]  
Middle East  
Asia & Other area  
**  
**  
**  
**  
GB 77  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
16. Service and Support  
**  
Call Center  
Humax Middle East Call Center (Dubai, UAE)  
Tel: +971 (0)4 359 2323 (Open: 9:00 - 20:00 / close on Friday)  
E-mail: [email protected]  
Open: Local Time in Dubai (GMT+4)  
9:00 - 20:00 (Saturday - Thursday, close on Friday)  
Support Language: English/Arabic  
**  
Humax Hotline (Germany)  
Germany: 01805 778 870 (€ 0,12/Min)  
Other Countries: + 49 1805 778 870 (€ 0,12/Min+ International Call Charge)  
Open: Local Time in Germany (GMT+1)  
8:00 - 20:00 (Monday - Friday)  
8:00 - 18:00 (Saturday)  
**  
**  
Support Language: Deutsch/English  
**  
Humax BTCI Hotline (Premiere Model)  
Germany: 01805-778900 (€ 0,12/Min)  
Austria: 0900-900633 (€ 0,33/Min)  
**  
For hardware repair, please refer to support website. (Homepage or HCSA)  
**  
**  
**  
**  
GB 78  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Haier Refrigerator ACM03ARW User Manual
Harman Kardon GPS Receiver GPS 300WE User Manual
Harman Kardon Home Theater System 60BQ User Manual
Honeywell Thermostat AQ1000TN2 User Manual
Hoshizaki Refrigerator CF1B FG FGY FS HS CR2B FG FGY FS HS User Manual
Hotpoint Washer HULT 843 User Manual
HP Hewlett Packard Camera Accessories YTH 2242 T User Manual
Huffy Fitness Equipment SKM 5200 User Manual
iLive Speaker IHS1 IHT3807DT User Manual
Impex Home Gym MWB 356 User Manual