CRCI-5500
Digital Set-Top Box
for
CryptoWorks Embedded
& Common Interface Standard
Contents
Safety......................................................... 1
Copyright & Glossary................................. 2
Remote Control Unit.................................. 3 ~ 4
STB Connections....................................... 5 ~ 7
Reference .................................................. 8
Guide of Functions .................................... 9 ~ 10
Guide of Main Menu.................................. 11 ~ 30
Motorised System...................................... 31 ~ 34
Troubleshooting Guide .............................. 35 ~ 36
Menu Map.................................................. 37 ~ 38
Specification .............................................. 39 ~ 40
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
This STB has been manufactured to satisfy the international safety standards.
Please read the following safety precautions carefully.
MAINS SUPPLY : 190 - 250V AC 50/60Hz
OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may result
in fire electric shock.
LIQUIDS
: The STB shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as base, shall be placed on the apparatus.
CLEANING
VENTILATION
: Disconnect the STB from the wall outlet before cleaning.
Use a light damp cloth(no solvents) to dust the STB.
: The slots on top of the STB must be left uncovered to allow proper airflow
to the unit.
Do not stand the STB on soft furnishings or carpets.
Do not expose the STB to direct sunlight or do not place it near a heater.
Do not stack electronic equipments on top of the STB.
ATTACHMENTS : Do not use any unrecommended attachments as these may cause hazard
or damage the STB.
CONNECTION TO THE SATELLITE DISH LNB
: Disconnect the STB from the mains before connecting or disconnecting the
cable from the satellite dish.
FAILURE TO DO SO CAN DAMAGE THE LNB.
CONNECTION TO THE TV
: Disconnect the STB from the mains before connecting or disconnecting the
cable from the satellite dish.
FAILURE TO DO SO CAN DAMAGE THE TV.
EARTHING
LOCATION
: The LNB cable MUST BE EARTHED.
The earthing system must comply with SABS 061.
: Place the STB indoor in order not to expose to lightening, rain or sunlight.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates "dangerous
voltage" inside the product that
presents a risk of electric shock
or personal injury.
This symbol indicates
important instructions
accompanying the
product.
Warn i n g !
Please do not insert metal or alien substance into the slots
for the Modules and Smart Cards.
In doing so can cause damage to the STB and reduce its life span.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Unit
STANDBY
NUMERIC BUTTONS
INFORMATION (RED)
TV/SAT
TV/RADIO
MUTE
SOUNDTRACK (GREEN)
SUBTITLE (YELLOW)
MENU
UHF (BLUE)
TIME (WHITE)
EXIT
CURSOR
OK
P+/P-
HELP
EPG
V+/V-
RCL (Recall)
RS-101P
3
Download from Www.Somanuals.com. All Manuals Search And Download.
NUMERIC BUTTONS
Press to select a service, enter your PIN Code or
numeric on the menu.
TV/SAT
10
11
1
2
Press to select the TV/SAT mode.
TV/RADIO
Press to switch between TV and Radio modes.
INFORMATION (RED)
Press to display the programme information box
on the screen. And this button functions same as
the RED button on the menus.
12 MUTE
Press to temporarily cut off the sound.
SOUNDTRACK (GREEN)
Press to display the soundtrack list for the current
service. And this button functions same as the
GREEN button on the menus.
3
4
13 MENU
Press to display the Main Menu on the screen
or return to the screen from a sub menu screen.
CURSOR
14
SUBTITLE (YELLOW)
Press to display the subtitle language list for the
current service. And this button functions same as
the YELLOW button on the menus.
Press to move the highlight bar for selecting
options on the menus.
And this button is used to change services
(up/down) and increase or decrease the audio
volume.
UHF (BLUE)
Press to set the UHF menu.
This button functions same as the BLUE button on
the menus.
5
6
OK
15
16
Press to display the service list.
This button is used to select the item on the menus.
TIME (WHITE)
P+/P-
Press to display the current time on the screen.
Press to reserve services on the Informaion box or
EPG. And this button functions same as the WHITE
button on the menus.
Programme up/down buttons.
Press to tune to the next or previous service.
Press to move up or down pages on the menus.
HELP
17
18
EXIT
7
8
Press to display the help box on the screen.
Press to return to the previous menu and screen.
EPG
V+/V-
Volume up/down buttons.
Electronic Programme Guide button displays
the TV/Radio programme guide.
Press to increase or decrease the volume.
RCL (Recall)
Press to select the service that was previously
viewed.
19
9 STANDBY
Press to switch between Operation and Standby
modes.
•
Please note : The design of Remote Control Unit may be changed without notice in advance.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
STB Connection
FRONT & REAR PANEL
TV LED(AMBER)
The LED lights on in TV mode.
4 STANDBY LED(RED)
1
Indicates that the STB is under standby.
5
2 RADIO LED(GREEN)
STANDBY
Press to switch between Operation and Standby
modes.
The LED lights on in RADIO mode.
DISPLAY
3
6 TV/RADIO
Shows service number, error messages,
RCU commands and time in Standby mode.
Press to switch between TV and Radio modes.
,
7
Use to change services down/up.
LNB IN
AUDIO/VIDEO OUTPUT
6
1
2
3
Use to connect an antenna.
Audio/video signal from your STB to VCR
or TV.
LNB OUT
Use it when connecting to another STB.
7 0/12V OUT
For an external LNB switch.
RS-232C
Use it when connecting to your PC.
RF OUTPUT
Use to connect a RF signal from your STB to
RF(ANT) input jack on your TV.
8
9
4 TV SCART
For the audio/video input of the TV.
RF INPUT
Use to connect a general Aerial Antenna and
CABLE jacks to a RF input jack on the STB.
VCR SCART
For the VCR.
5
S/PDIF
10
Output for connection to a digital amplifier.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
There are several ways of connecting the STB to your existing Audio/TV system.
We recommend using one of the following set-up for best results:
TV only
1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and
the other end to a SCART socket on your TV.
2. Connect one end of a RF lead to the RF OUT connector on the STB and the other end
to the RF IN connector on your TV.
3. Connect your TV antenna to the RF IN connector on the STB for receiving terrestrial
channels.
4. Connect the coaxial cable from the LNB to the LNB IN socket on the STB.
TV with VCR
1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and
the other end to a SCART socket on your TV.
2. Connect one end of a 21-pin SCART cable to the VCR SCART connector on the STB
and the other end to a SCART socket on your VCR.
3. Connect one end of a RF lead to the RF OUT connector on the STB and the other end
to the RF IN connector on your VCR.
4. Connect one end of a RF lead to the RF OUT connector on your VCR and the other end
to the RF IN connector on your TV.
5. Connect your TV antenna to the RF IN connector on the STB for receiving terrestrial
channels.
6. Connect the coaxial cable from the LNB to the LNB IN socket on the STB.
With Hi-Fi System
1. Connect an RCA/Cinch stereo cable from the AUDIO L,R sockets on the back of the STB
to the LINE, AUX, SPARE OR EXTRA input sockets on your Hi-Fi system.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
STB Connection
TV with VCR and Motorised System (DiSEqC 1.2)
1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and
the other end to a SCART socket on your TV.
2. Connect one end of a 21-pin SCART cable to the VCR SCART connector on the STB
and the other end to a SCART socket on your VCR.
3. Connect one end of a RF lead to the RF OUT connector on your VCR and the other end
to the RF IN connector on your TV.
4. Connect one end of a RF lead to the RF IN connector on your VCR and the other end to
the RF OUT connector on the STB.
5. Connect the coaxial cable from the LNB of your motorised system to the LNB IN socket
on the STB.
6. Connect your TV antenna to the RF IN connector on the STB for receiving terrestrial
channels.
7. Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1.2 motor.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
1. Connect DiSEqC 1.0
All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennas to be connected to the
STB simultaneously.
If you have two or more fixed antennas or LNBs, you can use a DiSEqC 1.0 switch.
1. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC switch.
2. Connect the coaxial cable from the second LNB to the LNB 2 or LNB B input connector of the DiSEqC switch.
3. Do the same for other LNBs.
4. Connect one end of a Coaxial cable to the RF output connector of the DiSEqC switch and the other end to
the LNB IN socket on the STB.
2. Connect DiSEqC 1.2
Please refer to page 31.
3. Connect a Satellite antenna
To the digital receiver, you can connect either a single satellite antenna directly or through converter box several
antennas or LNB of multi-feed equipment. You can connect a further Sat-receiver (for example analog),
with the receiver of common antenna equipment that has satellite signals.
• Connect an antenna cable through converter boxes
1. When you assemble several antenna or a multi-feed equipment that has several LNB (or LNB with several exits),
connect each cable from the antenna to a converter box.
2. Connect the output of converter box to “LNB IN”, as in example displayed.
3. When you use a converter box of 0/12V-steerage, connect it to the output “0/12V” additionally.
For converter boxes of 22KHz- or DiSEqC-steerage, you can skip this point because the steerage signal occurs
through the antenna cable.
4. Loop Through
If you have another analogue or digital STB and you wish to use the same LNB then you can connect it via the loop
through. Connect one end of a Coaxial cable to the LNB OUT on the STB and connect the other end to the LNB IN
on your second STB.
5. Connect a S/PDIF Fiber-Optic cable
If you are watching a programme with a Dolby Digital soundtrack (see page 10) you can enjoy the higher quality
sound of the Dolby Digital audio by connecting the STB to an external Dolby Digital television or
amplifier. Do this by connecting the optical S/PDIF output of the STB to the optical S/PDIF input of the
external Dolby Digital product (television, amplifier,.....).
6. Software Upgrade
Software Upgrade - Humax digital set-top box is a highly sophisticated product - incorporating one of the best
software applications. Whenever a problem is found with this software or, in fact, extra functions or enhanced
applications are added, the software in the equipment has to be upgraded. In order to maintain proper performance
of the product, it is essential to have the most up to date software. The latest news and release of software versions
may be found at Humax website - http://www.humaxdigital.com. It is recommended that users register to HCSA
(Humax Customer Service Area) and periodically check for the availability of software upgrade.
There are two methods to upgrade the software :
(a) set-top box to set-top box download (copies the software of the main unit into slave unit);
(b) pc to set-top box download (downloads the software directly from pc to the model requiring upgrade);
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Function
Information Box (I-Plate)
The details of service part and event part are automatically
displayed on the I-Plate when pressing the i button(
changing services.
) or
I-Plate is divided into service part and event part.
SERVICE-PART (Left side of the box)
SERVICE PART consists of the following items:
• I-Plate icon, Current time and Dolby Digital symbol
• Service name, Service number,
icons
• Subtitle, Teletext, Scrambling service symbol
(These are automatically displayed when the broadcasting
station provides appropriate information.)
• Signal quality bar
EVENT-PART (Right side of the box)
EVENT PART consists of the following items:
• Event name, Event duration time
• Description text of event, State of reserved event
Event Part shows the current and next event information.
button : Use to move from the current event information to
the next event information.
button : Use to move from the next event information to
the current event information.
When the Help(
)button is pressed under I-Plate display and
there are no detailed event informations in the I-Plate,
the Help window will appear on the screen.
The Help window shows the current Network information, including:
Satellite Name, Frequency, Polarisation, Symbol Rate, FEC...
The detailed information for the event can be displayed by pressing
the Help(
You can reserve the programme in the event data display mode by
using the White( )button.
)button in the I-Plate with event data displaying mode.
You can reset timer programme Once, Daily or Weekly mode.
When you release the timer programme mode, then you will be
asked to confirm the action.
Changing Services
To change services, do in the following sequence;
1. Press the Numeric buttons(0~9) on the remote control unit.
2. Press the
Or press the Recall(
To switch between TV and Radio services, press the TV/Radio
)button.
buttons or
buttons.
), Service-list(
), EPG(
)mode button.
(
To select the previous viewed Service, press the Recall(
button.
)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Volume Control
To adjust the volume level, use the
To temporarily stop the volume, press the Mute(
To cancel mute, press the Mute(
buttons or
)button.
)button again or press the
buttons.
buttons or
buttons.
Soundtrack
When you want to change the audio language of current service,
press the Green( )button firstly.
The on-screen menu is displayed on the top to left side of the
screen.
To change the audio language:
1.
2.
3.
buttons : Use to select the audio on the left, right or both.
buttons : Use to select the audio language you want.
button : When this button is pressed, the Soundtrack
OSD will disappear keeping the selected
,
Soundtrack language constant.
When the current service is switched, the audio language returns to
the audio language that was selected in previous service. lf the
returned audio language is invalid, the audio language that you
selected from the audio language menu has the priority of playback.
Soundtracks broadcast in Dolby Digital are indicated by
Dolby Digital symbols either side of the respective language
selection in the menu. By selecting such a soundtrack the Dolby
Digital audio will be output by the optical S/PDIF on the STB.
This can be decoded by an external Dolby Digital television or
amplifier, for example.
Subtitle
When the current broadcasting programme provides subtitle, press
the Subtitle(
)button to see the current subtitle language list.
To change the subtitle language:
1. Use the
2. Press the
buttons to select a Subtitle language you want.
button and the selected language is highlighted
and then the Subtitle Language you want is displayed on the
screen.
Press the
button to cancel the Subtitle mode.
Teletext
Use your TV Remote Control Unit to control the Teletext service.
The teletext button doesn’t exist on the STB Remote Control Unit.
When the service supports Teletext, the Teletext icon( ) is
displayed on the i-plate.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
1. Select Service
The select service displays the required service list which can be
viewed in Simple or Advanced mode.
2. TV Guide
Your STB has an Electronic Programme Guide(EPG) to help you
navigate through all the possible viewing options.
The TV Guide supplies information such as programme listings and
start and end times for all available services.
In addition, detailed information about the programme listings and
start and end times for all available services.
In addition, detailed information about the programme is often
available in the EPG(the availability and amount of these
programme details will vary, depending on the particular
broadcaster).
3. Parental Control
Access to services and programmes is controlled by a PIN Code
(i.e., a 4-digit secret code that is defined by the user).
The very first time you attempt to lock all services(or lock
programmes by ratings), the on-screen menu will instruct you to
assign a PIN Code (Later on, if necessary, you can change it).
4. Installation
The Installation mode allows you to have the information of setting
services and newly set services (language, time, organise, search,..)
Furthermore, you can recognize the states of hardware and
software versions and signals from your STB.
5. Utility
This menu provides Calendar and Biorhythm.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Select Service
To select the desired in the service list, you should firstly
display the service list using
select a service and press
button. Use
button. Also use
buttons to
buttons to
select a service directly in the service list.
The contents of service list are as follows:
Simple Service List
1. Use the
buttons to select “Select Service” from the
button.
Main Menu and press the
2. Use the
press the
buttons to select “Simple” from the Main Menu and
button.
3. Then the simple service list(max. 10 services) will appear on the
screen.
Advanced Service List
The advanced service list shows thirty services. This list is similar
to the Simple service list except that it shows thirty services and is
apart from the Network and Genre list that displays twenty servies.
Use the following colour buttons to list various service lists:
The colour button corresponds the following Service List.
• Red
• Green (
• Yellow (
(
) button - service list All
) button - Favourite
) button - Network
• Blue
• White
(
(
) button - Genre
) button - service list by Alphabetical order
Service Configuration
To change the attributes of a service
1. Use the
buttons to move a service you want to change
in the Service List.
2. Press the Menu(
)button.
3. Use the
buttons to move to an item(such as genre,
favourite, lock, skip, delete) you want on the Service
Configuration screen.
4. Use the
buttons to select. Press the
button to complete.
Service All
1. To display the Service All, press the
Use Red( )button to select the service All list.
2. Select the desired service by using the buttons.
3. Press the button to view the selected service.
button
The service list provides you the Simple mode and Advanced
mode. The right side scroll-bar of the screen displays the
location of the selected service in relation to All services.
Press the Red(
)button to toggle between Simple mode and
Advanced mode.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
Service Favourite
1. Press the Green(
)button on the remote control unit to select
the Favourite service list.
Note : The groups are labeled in four different alphabet characters
(A,B,C,D).
2. Use the
buttons to select a favourite group that you want.
3. Press the Green(
)button to toggle group and service list.
Service Network
1. Press the Yellow(
)button on the remote control unit to select
the Network service list.
2. Use the
3. Press the Yellow(
buttons to select a service
)button to toggle provider and service list.
Note : 1. The provider name is displayed on the left window and
the provider’s services are displayed on the right window.
2. The scroll bar on left of the screen shows the location of
the cursor in the Network. The scroll bar on right of the
screen shows the location of the service from the
selected Network.
Service Genre
1. Press the Blue(
)button on the remote control unit to select
the Genre service list.
2. Use the
3. Press the Blue(
buttons to select a service.
)button to toggle Genre and service list.
Note : The scroll bar on left of the screen shows the location of
the cursor in the selected Genre. The scroll bar on right of
the screen shows the location of the service.
Service Alphabet Order
1. Press the White(
)button on the remote control unit to select
the Alphabet service list.
2. Use the
3. Press the White(
buttons to select a service.
)button to toggle Alphabet and service list.
Note : The scroll bar on left of the screen shows the location of
the cursor in the Alphabet. The scroll bar on right side of
the screen shows the location of the selected Alphabet
service.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2. TV Guide
You can watch a programme being shown and reserve it in the
TV Guide mode.
To enter the TV Guide mode
Press the EPG(
)button on the remote control unit or select the
TV Guide on the Main Menu.
To select the TV/Radio Guide
Press the
button on the remote control unit and TV Guide will
be switched to the Radio Guide.
TV Guide mode includes four different modes.
To select each mode, use the following buttons:
• Red
(
)button : Use to display the current and next
programme list.
• Green(
• Yellow(
• Blue (
)button : Use to display the programme list for
one-week.
)button : Use to display the reserved programme
list.
)button : Use to display the simple TV Guide list.
(Quick mode)
NOW / NEXT mode
Show the informations of the programmes that are played now or
will be played next time.
This mode consists of the service name, event name, event
duration time, current time and on-screen-display window.
To watch a programme you want through the display window :
• Use the
The selected service will appear on the right display window.
• Use the buttons to select a programme you want.
And then press the button on the remote control unit.
buttons to select a programme you want.
The selected service will appear on the right display window.
The selected OSD will be highlighted every time the cursor
moves.
To reserve a programme you want :
• Select a programme you want by using the
buttons. And then press the White(
buttons or
)button.
Press the
buttons to watch the programme of previous page
or the programme of next page. Press the Yellow(
to watch the Reserved programme list.
)button
Weekly mode
Shows the information of programmes that will be played for a
week. Select a day you want using the buttons.
To watch and reserve a programme you want, do the same steps
with the NOW/NEXT mode.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
Reserved mode
Shows the programme lists that you have already reserved on the
TV Guide or Information box.
Maximum eight programmes can be reserved.
This programme list includes service name, date, duration time,
reservation mode and event name.
To cancel the Reserved service, select a programme you want to
cancel using the
buttons and then press the White(
)button.
Quick mode
Shows a simple TV Guide like an Information box.
This mode shows in the A/V playback mode.
• Red vertical line : Indicates the current time.
• Black/white bar : Shows the proceeding state of programme.
• Time range of bar : This consists of three blocks by 30 minutes
per block.
3. Parental Control
You can set a parental guidance rating to each programme
in this mode.
1. When the
button is pressed after selecting the highlighted
parental control on the initial menu screen, a display window
for entering the PIN Code will appear on the centre of screen.
0 0 0 0
** The default PIN Code is
.
2. Enter the PIN Code on the display window.
(If any problem occurs when entering a PIN Code, you cannot
switch to the next mode.)
3. Set the parental guidance rating of highlighted censorship
classification.
The parental level is given as age-based numbers :
no block, 6, 10, 14, 18 and total block. Enter the PIN Code
to unlock or lock programmes.
4. To change your PIN Code:
• Select the highlighted Old Pin Code using the
and then enter your Old PIN Code.
buttons
• Enter a New PIN Code in the highlighted New PIN Code
using the buttons.
• To verify the New PIN Code, re-enter a New PIN Code in the
highlighted Verify Changed PIN Code.
5. When the entered PIN Code is correct, then all settings are
completed.
(If the PIN Code is wrong, the message “PIN Code mismatch”
will be displayed on the display window. When the
button
is pressed at this time, the Old PIN Code is valid and the
cursor is located in the first position of this menu.)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Installation
This mode allows you to customise, add a new service and
displays the state of the STB. Enter the submenus after selecting
the Installation mode in the Main Menu.
4-1. System Setting
The System Setting mode supports the STB internal settings
according to the connection of the receiver and external units.
This mode includes Language Setting, Time Setting,
A/V Output Setting, UHF Tuning and Other Settings.
Language Setting
Select the language for menu, audio or subtitle.
1. Select the highlighted language setting using the
in the system setting mode and then press the
buttons
button.
2. Select the highlighted Menu(or Audio, Subtitle) Language and
press the
3. Use the
press the
buttons and the language list will be displayed.
buttons to move to a language you want and then
button to finish setting.
Menu Language
Select a language for the menu or banner OSD in this mode.
You can choose the language from a selection of Czech, Danish,
English, French, German, Hungarian, Italian, Polish, Portuguese,
Spanish, Swedish, Turkish and more.
When a broadcasting information (event) is transmitted, the selected
Menu Language will be applied.
Audio Language
Select the default language for audio when changing services.
If you change the current service, your STB will initially select
the previously memorised Audio Language. If the Audio Language
of current service is not provided, at this time, you should reselect
a language on the Audio Language menu.
Languages provided:
Czech, Danish, Dutch, English, Finnish, French, German,
Hungarian, Italian, Norwegian, Portuguese, Rumanian, Russian,
Spanish, Swedish, Turkish and more.
If no language is provided, then the default language of current
service will be automatically selected.
Subtitle Language
Select the default language for subtitle when changing services.
Language provided: Danish, English, Finnish, French, German,
Hungarian, Italian, Norwegian, Portuguese, Spanish, Swedish and
more.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
Time Setting
You can set the Current Time and Wakeup Time in this mode.
Furthermore, the Service Number in the Wakeup mode and Sleep
Time (standby mode) can be set. When a VCR is connected,
recording can be automatically done according to Wakeup/Sleep
Time Setting.
Current Time
To set the Current Time, enter the Offset value using the
standardised information of current service area.
The time setting will be used as the standardised time for the
I-Plate, TV Guide, Wakeup and Sleep Timer.
Time Offset
Current Time is based on TDT (Time and Data Table) at the stream
of the current service.
Timer
You can select nine kinds of Timer like 1,2.......8 and Disabled.
If you select “Disabled”, then the other timers will not work. Press
the
button at timer option to display the Timer table. The Timer
determines the on/off time and can also be used for VCR recording.
Timer Mode
Wakeup/Sleep timer determines the Timer Mode.
• Once : The timer programming is applied only once.
• Daily : The timer recording is applied everyday repeatedly.
• Weekly : The timer recording is applied weekly.
(Set one day in a week).
Use the
buttons to select the type of timer programming.
Wakeup Time
Select the time when STB is turned on.
Use the Numeric buttons(0~9) on the remote control unit to enter
your Wakeup Time.
Wakeup Service No.
Use the
buttons to set the service number provided for the set
Wakeup Time.
Use the TV/Radio(
TV/Radio service.
)button on the remote control unit to toggle
Service Name
The Service Name that has been determined by the
Wakeup Service No. will be shown.
Sleep Time
Depending on Time Setting, select the time when STB is turned off.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V Output Setting
Video Output (CVBS/S-Video/RGB)
Set the video mode for the TV SCART output.
Audio Output
Set the audio mode which is output from the TV SCART and
RCA/Cinch Jack. (Stereo/Mono)
Dolby Digital
lf Dolby Digital option is ON and the broadcaster provides
the Dolby Digital stream, the Dolby Digital audio language is
firstly selected when changing the service.
Screen Mode
Select the aspect ratio of TV which is connected to
STB (4:3 or 16:9).
Display Format
Select the format which the video is to be displayed on screen.
When your TV set is 4:3 and video source is 16:9,
STB will display in Letter-box or Centre mode as selected.
When your TV set is 16:9 and video source is 4:3,
STB will display in the Pillar-box or Full mode as selected.
UHF Tuning
You select the STB output by using the UHF channel.
Channel
Select an UHF channel. The range of channels and frequency
value are different for each PAL Standard:
PAL I/G for Europe
: CH21 ~ CH69
PAL B for Europe/Australia : CH28 ~ CH69
PAL D for China
PAL K for Russia
: CH13 ~ CH62
: CH21 ~ CH69
PAL Standard
Select a PAL Standard according to the above range of channels.
Offset
Adjust the fine tuning value. The Offset ranges from -4 to +4 and
each Offset represents 1MHz.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
Other Setting
Select the OSD Transparency, Information Box Display Time and
so on.
OSD Transparency
Select the OSD Transparent type. It affects Information box,
Soundtrack, Subtitle, Service list, Time and Quick mode of
TV Guide. Use the
buttons to toggle transparent, opaque,
20%, 40%, 60% and 80%.
Info.Box Display Time
Set the display duration of Information box displayed on the screen
after changing services. The time ranges from 0 to 20 seconds.
Menu Background
Set the type of background for the menu to be displayed on.
Changing to Reserved Service
When the reserved time has come during the view of services:
• Manual Mode
This mode shows the message “A reserved event has started on
another service. Press OK to view the reserved service.
Press EXIT to ignore reserved servicce. (will automatically change
after 10 seconds.)” And ask the presence of change and then
makes a change.
• Auto Mode
The current service will be automatically changed to the
time-reserved service.
4-2. Service Organising
This menu gives users access to options that allow them to
organise their TV Services, Radio Services and Networks.
0 0 0 0
** The default PIN Code is
.
Organise TV Services
Organise All Services
This mode allows users to Delete, Move, Lock, Skip and Rename
TV Services.
• Delete
1. Press the Red(
)button to delete unwanted services.
2. Highlight the services that you want to delete in grey.
3. Press the
4. Press the
button to confirm.
button to cancel the deletion.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
• Move
1. Press the Green(
want to locate.
)button to move the service to where you
Then, the icon( ) will be displayed in front of the service
number.
2. Use the
3. Press the
4. Press the
buttons to select a new location.
button to fix the location.
button to return to the original location.
• Lock
1. Press the Yellow(
)button to lock services.
Then, the symbol “ ” will be displayed at the right side of the
service name.
2. Enter the PIN Code to view the locked services.
• Skip
1. Press the Blue(
Then, the symbol “
service name.
)button to skip services.
” will be displayed at the right side of the
2. Use Numeric buttons(0~9), service list or
skipped services when selecting channels.
button to view the
buttons.
Note : You can’t view the skipped services by using
• Rename
1. Press the White(
)button to change the service name.
Then, the keyboard image will be displayed on the screen.
2. Key in the new service name.
You can use the four direction keys to move or select the services.
: to move the previous service
: to move the next service
: to move back by 16 services
: to move forwards by 16 services
Note : The box between service list and the description of the
colour buttons offers the brief information of a service
where the cursor is located.
Organise Favourite A~D
Each of TV and Radio has four Favourite groups.
Each Favoruite group contains up to 100 services.
Delete, Move, Lock, Skip or Rename each TV service in a Favourite
TV group and re-group them into your Favourite
TV group.
This mode has the same operating methods as “organise all
services”.
• When you delete a service in the Favourite group, it will be
available again on the All TV service list. This allows the service
to be removed from the Favourite group.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
• You can move the service only within the Favourite group.
• Coloured keys are available when the cursor is located in the
middle window.
(Except when the middle window is disabled(grey).)
• To select the Favourite group;
1. Use the
button to move the cursor to “Gr.”-plate(left).
2. Select the wanted favourite group.
• To group the services into Favourites;
1. Use the
button to move the cursor to “services”-plate(right).
2. Select the service you want to group into Favourites.
3. Press the
4. Use the
5. Press the
button.
button to move the cursor to “Favourites”-plate(left).
button to save the selected group.
Note : 1. Use the
2. Use the
page.
buttons to move the cursor.
buttons to select the previous or next
Organise Service Genre
The Organise Service Genre feature allows the user to Delete/
Lock/Skip/Rename a service in the selected Genre.
Available genre : Movie, News, Show, Sports, Children, Music, Art,
Education, etc.
The colour buttons function same as ones for Organise All services
except the following differences:
• When you delete a service in the selected genre, it will be
available again on the All TV services list at the right side.
At that time, the genre for the deleted service becomes “etc”.
• You can move the service only in the selected genre.
• Coloured buttons are available when the cursor is located in the
middle window.
• To select the Genre;
1. Use the button to move the cursor to “Gr.”-plate(left).
2. Select the wanted genre.
• To group the services into a Genre;
1. Use the button to move the cursor to
“services”- plate(right).
2. Select the service you want to group into Genre.
3. Press the
4. Use the button to move the cursor to “Genre”-plate(left).
5. Press the button to save the selected group.
button.
Note : 1. Use the
2. Use the
page.
buttons to move the cursor.
buttons to select the previous or next
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Organise Radio Services
The Organise Radio Services functions same as TV Services
except that it uses Radio Services.
You can delete or move Radio Services and change the attributes
of them.
Organise All Services
The Organise All Services lets the user Delete, Move, Lock, Skip or
Rename Radio services on the All Radio services list.
Organise Favourite A-D
The Organise Favourite A-D lets the user Delete, Move, Lock, Skip
or Rename Radio Services from the Favourite Radio Services and
group into a new Favourite Radio Services.
The Radio Services are grouped into a Favourite in the same way
as the TV Services(refer to page 20).
Organise Service Genre
The Organise Service Genre lets the user Delete, Lock, Skip or
Rename Radio Services and group into Radio Service Genres.
Radio Genres include : Pop, Rock, Country, Classic, Jazz, Folk,
News, Show, Sports, Education, User A-D, etc.
The Radio Services are grouped into a Genre in the same way as
the TV Services (refer to page 21).
Organise Networks
You can edit services using the network unit.
• The provider names are displayed on the left side of screen,
and the TV/Radio Services included in the highlighted
Network are displayed on the right side of screen.
Only the Delete, Move, Rename Function can be used
in this mode.
• When TV/Radio Services are too many to be displayed, use
the button to move the cursor to the right window and use
the
and
buttons to move the cursor to the next list.
When the number of services is under 10, the scroll bar is not
displayed. In Radio Service icon(
number.
) is marked in front of service
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
4-3. Service Searching
Enter the PIN Code to access the Service Searching menu
as you access the Parental Control or Service Organising menu.
Press the
button to start Service Search after setting the
parameters.
** The default PIN Code is
0 0 0 0
.
Antenna Setting
Selects the antenna and LNB settings for Service search.
As you can change the settings for 22KHz Tone, 0/12V and DiSEqC
switch, there are 32 possible Antenna Setting for use.
The values that are set in this menu will be available for selection in
other service searching menus.
Antenna Alternative
There are 32 antenna alternatives, each one can have different
combinations of settings for 22KHz Tone, 0/12V and DiSEqC switch.
Satellite Name
Selects the Satellite Name that corresponds to the value of the
Antenna Alternative.
1. Press the
buttons to display the satellite list box.
2. Select the wanted Satellite Name.
3. If the desired Satellite Name is not listed then select User
Defined.
4. The keyboard will appear and you can type the Satellite Name
directly.
The selected Satellite Name can help you select the Antenna
Alternative in the searching menu, but it is possible to change
or select the Satellite Name only in the Antenna Setting menu.
Note : In case the selected satellite is used as OTA target satellite,
automatic detection of the OTA target satellite might not work
properly if you change or edit the name of the satellite.
5. Satellite Name is listed in alphabetical order and the order can be
changed according to Menu Language.
6. When inputting the Satellite Name, there is a 14 character limit.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
LNB Frequency
1. Select the L.O. Frequency that is set to antenna.
2. Use the
buttons to select the LNB frequency (Universal,
5150, 9750, 10600, 10750, 11475MHz or 0, 1, ......., 9).
3. If the required LNB Frequency is not available, then select “0”
and enter the frequency manually using the
Numeric buttons(0~9).
4. When you select Universal, both 9750 and 10600MHz are
supported at the same time.
The 22KHz Tone setting is unnecessary. (Disabled)
22KHz Tone
When you use a dual LNB or two antennas connected
to a 22KHz Tone switch box, make 22KHz Tone switch enable or
disable to select LNB or antenna.
0/12Volt Switch
When you use two LNBs or antennas is switched to
0/12V, select what LNB and antenna are used enable or disable.
0/12V terminal is located on the rear of STB.
DiSEqC Input
According to the option and position of DiSEqC switch,
select Disabled, Tone Burst A to B and DiSEqC A to D.
After setting the above mentioned value, press the
to move to the Manual Search menu.
button
Motorised System
The Motorised System is used to set the DiSEqC 1.2 motor by
Eutelsat specification.
If you wish to use this system, please refer to page 31.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
Service Search OSD
• If you press the
button during the search, then
Service Search stops and the searching menu will appear.
• When you find all the services, the following picture appears.
• Before saving it, you can select the services you want to delete.
Found services OSD
• The picture above shows services that are found after Manual
Search.
• Use the Red(
delete.
)button to mark the services that you want to
To unmark a service, select the service and press the
Red(
• Press the
)button again.
button to save, or press the
button to exit
without saving.
• Then Service Search menu appears again. When you exit from
all menus, the first service of the found service list is played.
In the bottom of found service picture, network, the information of
transponder and the number of found service that the services
belong to are displayed.
The deleted service by the Red(
counting of the number of services.
)button is excepted from
The deleted service is not included in this number.
“Free” applies to the empty space of the memory.
It will be used to store future services.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Search
Set the search parameters(Frequency, Symbol Rate, etc.) to
manually find the services that you have selected in the
transponder.
The bar on bottom of the submenu shows the signal quality(BER)
of the entered parameters.
Antenna Alternative
Select the target antenna for Manual Search.
The Satellite Name helps you select Antenna Alternatives.
This is only for reference and cannot be changed on this menu.
Frequency
Use the Numeric buttons(0~9) on the remote control unit.
Polarisation
Use the
buttons to select the Polarisation of the transponder.
(Auto, Horizontal, Vertical)
• Horizontal : 18 V are output through LNB line
• Vertical
: 13.5 V are output through LNB line
Symbol Rate
Inputs the Symbol Rate of the transponder you want to find.
Use the buttons or Numeric buttons on the remote control unit.
FEC (Forward Error Correction)
Use the
buttons to select the Forward Error Correction of the
transponder. You can select the value of Auto, 1/2, 2/3, 3/4, 5/6 and
7/8.
Network Search
• You can select Yes or No. When you select “Yes”, you can find
more transponders using the home network.
• As it refers to NIT during searching, if there is the frequency
information of other transponder, it searches the other
transponder besides the transponder that the user inputs.
Automatic Skip
• You can select Yes or No. When you select “Yes”, the search
will skip all scrambled services.
• When the found services are scrambled during searching,
they are not listed up.
Refer to descriptor of PMT whether it is scrambled or not.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
Advanced Search
Performs a manual search with the ability to enter PID(Video/Audio/
PCR) values. This mode is necessary when you search for the
signal that has abnormal service Infornation tables.
The setting of the sub items is the same as Manual Search.
Video PID/Audio PID/PCR PID
You can set PID to search for services.
1. Use the
buttons to select PID input mode.
2. Use the Numeric buttons(0~9) buttons on the remote control unit
to enter a decimal PID value.
3. In the hexadecimal input mode, press one of (0~9) buttons to
display a hexadecimal keyboard.
4. Enter a hexadecimal PID value.
Note : If no PID is input(Auto is displayed), the Advanced Search
functions same as Manual Search.
5. After the above mentioned value is set, press the
start Service Search.
button to
Note : The picture and the found service list during Advanced
Search are identical with the ones during
Manual Search.
SMATV Search
In case that several generations use Antenna and LNB in common,
as the frequency range of signal is input to STB is down as much as
LNB L.O.(Local Oscillator) frequency, search the service from
950 - 2150MHz.
Frequency
Inputs not RF frequency but the frequency that is down converted
through LNB in common. The unit is MHz and the range of input is
950 - 2150MHz.
Symbol Rate
Inputs the Symbol Rate of the signal you want to find.
FEC
You can select the value of 1/2, 2/3, 3/4, 5/6, 7/8 or Auto.
LNB Power
As there is whether the LNB Power of STB is necessary or not
according to the sort of IF-IF converters, select a suitable option for
situation.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Search
When you enter the Satellite Name that is set in Antenna Setting
menu, search all of the selected satellite without inputting the extra
frequency.
Antenna Alternative
Select the target antenna for Automatic Service Search.
The attribute of this antenna alternative number is already set in
Antenna Setting menu and the Satellite Name is helpful in the selec-
tion of the antenna, but in this menu you cannot change the Satellite
Name.
Search Type
• You can select one of two modes(Quick or Detail).
• When you select Quick mode, it searches the service by search
parameters that is preset.
• When you select Detail mode, it searches the service through all
field of tuner(950 - 2150MHz).
Detail Mode
The pre-fixed symbol rate list is changed according to Antenna
Alternative and Satellite Name. If you want to add or change it,
press the Red(
)button.
** The value of Pre-fixed symbol rates can not be editable.
(22000, 27500)
The picture of the Symbol Rate Add/Change mode is as follows:
1. When you press the Red(
)button after entered to detail
mode from search type, yellow box will be trimmed with red
edges meaning edit is possible.
2. You can easily put optional value with using Numeric
buttons(0~9).
3. Press the Red(
)button for confirmation, and you will
successfully exit from input mode.
If press the
button at symbol rate value input mode,
the value will be confirmed, and if you moves left or right
column use the
symbol rate to input. Then press the
Red( )button to exit from input mode.
buttons, you can differ values of
and the
To delete a Symbol Rate in the above list, press the
0 (Numeric button) in the selected position and then the
symbol rate disappears. The range of Symbol Rate that is input
additionally is 16-30Ms/s.
Note : The user should select the Satellite name in Antenna
Setting menu. When the user types the Satellite Name
separately, the search type is fixed to the Detail mode.
Press the
button anywhere to start Automatic Search.
28
The picture during searching is as follows.
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide of Main Menu
The picture searches with varying Frequency, Symbol Rate and
FEC etc. Satellite Name is the name that the user selects to
correspond with Antenna Alternative of Antenna Setting.
The progress bar(%) appears on bottom of the picture.
During the search, services that are found are displayed as follows:
1. Press the
button during Automatic Search to stop search.
2. After the search is finished, the appearite message appears.
3. Press the
button to return Service Search menu.
4-4. Status
STB Status
Displays the information of H/W Version, S/W Version,
Loader Version and CI CAM of STB and so on.
Signal Detection
Shows the Signal Level(AGC level) and Signal Quality(BER) of the
current service and is help to the initial antenna setting.
4-5. Common Interface
You can enjoy not only scrambled services using the Conditional
Access Modules (CAM), but also Free-To-Air services.
This STB currently supports six kinds of CAM (VIACCESS™,
Nagravision, CONAX, CryptoWorks(TM), Irdeto or Mediaguard).
Common Interface module and Smart Card depend on the service
provider. If you need CAM, contact your service provider or
distributor.
Note : If CAM is not used, then only Free-To-Air services are
available.
4-6. Conditional Access(for CryptoWorks Embedded)
This menu allows the user to view and change information on the
Smart Cards such as available entitlements, Maturity Rating and
PIN Code. Besides, you can view the mails from programm providers.
General Smart Card Information
Card label will be displayed as issuer’s name on the TV screen.
Programmes or Bouquets which are encrypted by only
CryptoWorks(TM) and distributor labels displayed on the TV screen
such as Wizja TV or MTV Europe and more.
To get more detailed information of viewing rights of channels or
bouquets, press the
button.
• Smart Card details
You can see smart card address, the validity date and current
maturity rating.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Available Entitlements
The user will select a single programme provider by selecting its
distributor label and you can get the information of available
entitlements.
• Subscription
You can see the vaild period of each service.
• PPV (Pay Per View)
If you purchased events in advance, the entitlements of Pay Per View
events will be displayed.
• IPPV (Impulse Pay Per View)
You can purchase an event during the active broadcast of the event
without pre-ordering. The entitlements of Impulse Pay Per View
events will be displayed. In this menu you need PIN Code.
Maturity Rating
The STB is required by CryptoWorks(TM) to include a parental
control facility for the viewing of restricted programmes.
This can be set to ‘Disable MR’ or PG(Parental Guide) to over 18.
The correct PIN Code is required to change this option.
PIN Code
In this menu you can make PIN Code enabled, disabled or changed.
• Enable PIN Code
You can enable the PIN Code.
• Disable PIN Code
You can disable the PIN Code.
• Modify PIN Code
You can change the PIN Code by using the (0~9) buttons on the
RCU. You will need to enter the old PIN Code before you can enter
new PIN Code.
Mail box
The STB can receive maximum 10 mails from programme providers.
To check and see the mails press the
button.
In the Mail list you can view or delete the mails.
If you store 10 mails and a new mail arrives, the oldest mail will be
erased and the new mail will be stored.
5. Utllity
STB supports additional functions such as Calendar and
Biorythm.
At the Biorhythm use the
buttons to adjust your birth
year and date to see your current biorhythm status.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Motorised system
DiSEqC 1.2 User Instructions
If you have a DiSEqC 1.2 motorised system, then you can use the DiSEqC 1.2 functions available.
The following instruction describes how to use the DiSEqC 1.2 functions to store the positions of the
satellites and to search for the services (STAB Rotor Sat motor recommended).
1. Satellite Setting Menu Options
When DiSEqC Motorised System is Enabled in the Antenna Setting, a new menu is available for
configuring the motor. This menu is called Satellite Setting and is accessed by pressing the
while the option Antenna Alternative is highlighted in the Manual Search menu.
The following options are available on the Satellite Setting menu.
button
Satellite Name
A selection of satellite names that can be used to identify a motor position. If the satellite name you require
is not available, please use other. In installer mode the Satellite Name Reference refers to the 0 position of
the motor.
Movement
In user mode this is used to fine-tune the position of the motor for better reception. In Installer mode this is
used to search for the position of a satellite manually.
Motor Control
Search : Searches for services on the chosen transponder.
Goto
:
Moves the motor to the stored position of the selected satellite name.
Stores the current position of the motor for the selected satellite name.
Resets all stored positions of the motor relative to the 0 position.(Installer mode only)
Store
Reset
:
:
DiSEqC Command Mode
Changes the current mode between Installer and User.
2. Setting your Receiver for DiSEqC 1.2
You must set your receiver up so that it is ready to use DiSEqC 1.2. To do so, do as follows
1. Press the Menu(
)button, to display the Main Menu.
2. Select Service Searching option and press
display the Service Searching menu.
button, to
3. Select Antenna Setting option and press
to display the Antenna Setting menu.
button,
4. You must set up a separate antenna alternative for each
satellite position required.
5. Select the name of the satellite you wish to use.
6. Select the correct LNB frequency for the LNB you are using.
7. Set the Motorised System to Enable using the
8. The option DiSEqC Input Selection should now be disabled.
This option is used for DiSEqC 1.0 and cannot be used in conjunction with DiSEqC 1.2.
buttons.
Your receiver is now ready to use DiSEqC 1.2. To return to the Main Menu, use the
until you are at the Main Menu.
button
31
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Initial Satellite Position Search
This is required when you first set your receiver up to use DiSEqC 1.2
and sets the positions of all pre-programmed satellites.
1. Make sure your motor is installed correctly with the
calibrations adjusted for the region you are situated.
(Please consult the user manual for your motor.)
2. Make sure your receiver is set up to use DiSEqC 1.2.
(see section 2 above).
3. On the Main Menu, select Service Searching option and
press the
menu.
button, you should now see the Service Searching
4. Highlight the option Antenna Alternative and press the
5. Highlight the DiSEqC Command Mode option and use the
and press the button.
6. Highlight the Motor Control option and use the
the button.
7. You will now see a warning message, press the
button to display the Satellite Setting menu.
buttons to change the value to Installer
buttons to change the value to reset and press
button to continue. All motor positions of the
pre-programmed satellites should now be correct. If you have any other make or model of DiSEqC 1.2
motor then you may need to store the satellite positions in yourself (Please refer to the user manual
for your motor).
8. Highlight the DiSEqC Command Mode option and use the
and press the button.
buttons to change the value to User
9. You should now be ready to start storing services for the various satellites (see 5 onwards).
4. Motor Limit Setting
Use this option to set the East and West limits of the motor. This should be used to prevent your dish from
hitting anything that may be obstructing the path of the dish.
1. On the Main menu, select Service Searching option and press the
button. You should now see the Service Searching menu.
2. Select Manual Search option and press the
now see the Manual Search menu.
button, you should
3. Highlight the Antenna Alternative option and press the
You should now be in the Satellite Settings menu.
button.
4. Press the
5. Highlight the Limit Setting option and use the
button to access the Motor Limit Setting menu.
buttons to
disable this. (Warning: When this option is disabled your motor will
be able to move beyond any limits that have been stored - please
take care in case there are anything obstructing the path of your
dish.)
6. To set the East Limit:
a) Select Movement and use the
buttons to move your
motor East or West until the motor is at the position you wish to
use as your East Limit. Use the
at the correct position.
buttons to stop the motor
b) Highlight the Store East Limit option and press the
store the current position as your East Limit.
button to
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Motorised system
To set the West Limit:
a) Select Movement and use the
the position you wish to use as your West Limit. Use the
correct position.
buttons to move your motor East or West until the motor is at
buttons to stop the motor at the
b) Highlight the Store West Limit option and press the
West Limit.
button to store the current position as your
5. Manual Satellite Search
The purpose of this is to set the motor position for each satellite manually. This is useful if the satellite you
require is not available from the pre-programmed list (see 3 above).
To do this, you must access the Satellite Settings menu. Do as follows ;
1. Select Service Searching from the main menu and press the
Searching menu.
button, to display the Service
2. Select the Manual Search option and press the
button, to display the Manual Search menu.
Select the relevant Antenna Alternative that you are using for this satellite.
3. Enter the Frequency, Polarisation, Symbol Rate and FEC of a transponder on the satellite you wish to find.
This transponder information should be unique to this satellite.
4. Select the Antenna Alternative option and press the
5. Highlight the option DiSEqC Command Mode and using the
6. Highlight the option Satellite name and use the buttons to select the satellite you want to find,
button, to display the Satellite Settings menu.
buttons change this to Installer.
use others if the name of the satellite you want does not appear.
7. When you have selected the satellite you wish to find, go down to the Movement option and again using
the
buttons to start the motor moving.
8. You should move the motor as far west as possible and the move it east so that you cover the
complete movement range of the motor.
9. During the move from west to east the Signal Quality bar should register a signal once. This is the
position of the satellite. If there are two or more different positions which registers a signal, then you
must choose another frequency that is unique to the satellite you want.
10. Use the Signal and Strength Quality bar at the bottom of the screen to judge the best position of the dish.
11. Use the
12. When you have the best position of the dish go to the Motor Control option and using the
select store and press the button. The position of the satellite should now be stored.
13. If you do not store this position, it will be lost when you exit the menu.
buttons to stop the motor when required.
buttons
14. Repeat the process for each satellite if required, remembering to use a different antenna alternative for
each satellite.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Moving to a pre-set Satellite
Once you have stored the positions of the satellites you want (see left below) you can now search for the
services transmitted from them. Before you can do this, you must move the motor to the position of the
satellite you wish to search. To do this, you must access the Satellite Settings menu. Do as follows ;
1. Select Service Searching from the Main Menu and press the
Searching menu.
button, to display the Service
2. Select the Manual Search option and press the
3. Select the Antenna Alternative option and press the
button, to display the Manual Search menu.
button, to display the Satellite Settings menu.
4. In the Satellite Settings menu ensure that you have DiSEqC Command Mode option set to User.
5. Highlight the option Satellite Name and use the buttons to select the satellite you want to view.
6. When you have selected the satellite you wish to view, go down to the Motor Control option and again
using the buttons select go to and press the button.
7. The motor will now move to the position of the selected satellite.
8. The Movement option is used to fine-tune the position of the motor.
9. When using the Movement option for fine-tuning, you must remember to store the changes you have
made or else these will be lost.
7. Searching for services on your selected satellite
Once you have moved the motor into position, you can search for the channels transmitted from the
relevant satellite. To search for services on your new selected satellite, Do as follows ;
1. Move the motor to the position of the satellite you wish to search.
(see section 6 above)
2. Select the service searching from the Main Menu and press the
button. To display the Service Searching menu.
3. Select the manual search option and press the
display the Manual Search menu.
button to
4. Now enter the Frequency and Symbol Rate using the (0~9) buttons.
Next enter the Polarisation and FEC values using the
5. When you have entered all these details in, press the
and the search will begin.
buttons.
button
6. When the search has finished, press the
button to view.
7. Repeat the process for all the transponders you want from this
satellite.
8. Automatic Search
It is possible to use automatic search using the DiSEqC 1.2 motorised system.
1. Ensure that the positions for the satellite you want to search is correct. (see Section 3 and 5 above)
2. In the Main Menu, select the option channel searching and press the
button.
3. In the Service Searching menu, select the Antenna Alternative that you have set for this satellite.
4. When you search new services, please refer to Automatic Search of page 28.
5. When the search has finished, press the
button to store and view the services.
Now that you have stored all the positions of the satellites and searched for all the services you want,
you can now use your receiver as normal. When you change to a service that is being transmitted from
a different satellite, you will have to wait a few seconds to allow the motor to move into position to receive
the new service.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
35
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Map
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Gneral Smart
Card Information
Available Entitlemants
Maturity Rating
PIN Code
Mail Box
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
Conditional Access Interface
PCMCIA
2 Slot Common Interface
CryptoWorks Embedded
1 Slot Smart card
Tuner & Channel
Input Connector
Frequency Range
Input Impedance
Signal Level
IF
F-type, IEC 169-24, Female
950 - 2150 MHz
75Ω unbalanced
-25 to -65dBm
480 MHz
IF Band width
LNB Power &
Polarisation
36 MHz
Vertical : +13.5V
Horizontal : +18V
Current : 500mA Max. Overload Protection
22 KHz Tone
Frequency : 22 ± 4KHz
Current Max. 50mA
Version 1.0/1.2 Compatible
QPSK
Amplitude : 0.6 ± 0.2V
0/12V DC Output
DiSEqC Control
Demodulation
Input Symbol Rate
FEC Decode
2-31 Ms/s
Convolutional Code Rate 1/2, 2/3, 3/4, 5/6 and 7/8
with Constraint Length K=7
MPEG Transport Stream A/V Decoding
Transport Stream
MPEG-2 ISO/IEC 13818
Transport stream Specification
MPEG-2 MP@ML
Profile Level
Input Rate
60 Mbit/s Max
Aspect Ratio
Video Resolution
Audio Decoding
Audio Mode
Sampling
4:3, 16:9
720 x 576
MPEG/MusiCam Layer I & II
Single channel / Dual channel / Joint stereo / Stereo
32, 44.1 and 48KHz
Memory
Main Processor
Flash Memory
TMIPS R3930(81MHz)
3Mbyte
Graphic(MPEG) &
System DRAM
4Mbyte
You can use a special antenna switch with DiSEqC commands.
When changing ASTRA 1 to EUTELSAT for example, a DiSEqC command is sent with the 22KHz tone
through the antenna cable. The antenna switch will change ASTRA 1 to EUTELSAT. The concept of
DiSEqC is a protective trademark of EUTELSAT.
Data rate decides the picture quality of digital TV programmes.
Data rate of about 5-6 Mbit/s coincides with the picture quality of a analog TV programme.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
A/V & Data In/Out
TV SCART
Video Output(CVBS, S-Video, RGB)
Audio Output
(Resolution : 20 bits DAC, Max. 2 Vrms)
Video Output(CVBS)
VCR SCART
Video Input(CVBS, S-Video, RGB)
Audio Output(Resolution : 20 bits DAC, Max. 2 Vrms(fixed))
RCA/Cinch, Video Output(CVBS)
VIDEO
AUDIO R/L
RCA/Cinch Volume and Mute Control
(Resolution : 20 bits DAC, Max. 2 Vrms)
Digital Audio Output, Fiber-Optic(Resolution : 20 bits)
Transfer rate 115,200 bps, 9pin D-sub Type
S/PDIF
RS-232C
RF-Modulator
RF-Connector
Frequency
75Ω, IEC 169-2, Male / Female
470 - 860 MHz
Output Channel
TV Standard
Preset Channel
CH21-69, CH28-69 or CH13-62 for the Remodulator
PAL I/G/B/D/K selectable by Menu setting
CH36 (or TBD). Software changable by Menu
Power Supply
Input Voltage
Type
190 - 250V AC, 50/60 Hz
SMPS
Power Consumption
Standby Power
Protection
Max. 35W
≤11W
Separate internal fuse. The input shall have lightening Protection
Physical Specification
Size (W
x
H
x
D)
370
x
60
x
280 mm (Excluding the Foot)
Foot height is 8 mm
Around 2.8 kg
Weight (Net)
Operating Temp
Storage Temp
0°C to + 45°C
-10°C to + 70°C
Storage Humidity
5% ~ 95% RH (Non-Condensing)
•
Please note : The specification of the STB may be changed without notice in advance.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
HOCRCI5500.700
Download from Www.Somanuals.com. All Manuals Search And Download.
|