Humax DVR CX PVR 9200C User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notice  
Warnings, Cautions and Notes  
Throughout the whole manual, pay special attention to the following marks that indicate hazardous situations.  
**  
•
•
•
Warning  
Indicates a hazardous situation which could result in serious injury.  
Caution  
Indicates a situation which could damage the equipment or other apparatus.  
Note  
Indicates additional information to make the user aware of possible problems and information of any importance  
to help understand, use and maintain the installation.  
**  
Meaning of Symbols  
To reduce the risk of electric shock, do not remove cover (or back). No user serviceable  
parts inside. Refer servicing to qualified service personnel.  
This symbol indicates dangerous voltage inside the product that presents a risk of electric  
shock or personal injury.  
This symbol indicates important instructions accompanying the product.  
**  
Instruction about the ‘WEEE’ Symbol  
This product should not be disposed with other household wastes at the end of its working  
life. Please separate this from other types of wastes and recycle it responsibly to promote  
the sustainable reuse of material resources. This will prevent possible harm to the  
environment or human health from uncontrolled waste disposal. Domestic users: Please  
contact either the retailer where you purchased this product or their local government office  
for details of where and how they can take this item for environmentally safe recycling.  
Business users: Contact your supplier and check the terms and conditions of the purchase  
contract. This product should not be mixed with other commercial wastes for disposal.  
GB 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Warning  
This product has been manufactured to comply with international safety standards. Please read the following safety  
precautions carefully.  
**  
Safety Instructions and Precautions  
**  
1. MAINS SUPPLY  
90-250V a.c., 50/60Hz  
•
Operate this product only from the type of power supply indicated on the marking label. If you are not sure of  
the type of power supplied to your home, consult your local power company.  
•
**  
Disconnect the product from the mains before you start any maintenance or installation procedures.  
2. OVERLOADING  
•
**  
Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock.  
3. LIQUID  
•
The product should not be exposed to liquid of any kind. In addition, no objects filled with liquid should be  
placed on the apparatus.  
**  
4. CLEANING  
•
Disconnect the product from the wall outlet before cleaning.  
•
**  
Use a light damp cloth (no solvents) to dust the product.  
5. VENTILATION  
•
The slots on top of the product must be left uncovered to allow proper airflow into the unit.  
•
Do not stand the product on soft furnishings or carpets.  
Do not stack electronic equipments on top of the product.  
•
**  
6. ATTACHMENTS  
•
**  
Do not use any unsupported attachments as these may be hazardous or cause damage to the product.  
7. CONNECTION TO THE CABLE TV SIGNAL  
•
Connect all components before plugging any power cords into the wall outlet. Always turn off the product, TV  
and other components before you connect or disconnect any cables.  
**  
8. CONNECTION TO THE TV  
•
Disconnect the product from the mains before connecting or disconnecting the cable from the TV. Failure to do  
so can damage the TV.  
**  
9. LOCATION  
•
•
•
Place the product indoors to avoid exposing it to lightning, rain or sun.  
Do not place it near a radiator or heat register.  
Make sure it has more than 10 cm clearance from any appliances susceptible to electromagnetic influences,  
such as a TV or a VCR.  
•
•
•
Do not block the openings with any object, and do not place the product on a bed, sofa, rug, or other similar  
surface.  
If you place the product on a rack or a bookcase, ensure that there is adequate ventilation and that you have  
followed the manufacturer’s instructions for mounting.  
Do not place the product on an unstable cart, stand, tripod, bracket, or table where it can fall. A falling product  
can cause serious injury to a child or adult, and serious damage to the appliance.  
GB 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Warning  
10.LIGHTNING, STORM or NOT IN USE  
•
Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left  
unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and  
power-surges.  
**  
11.EXTRANEOUS OBJECTS  
•
Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or  
damage parts.  
**  
12.REPLACEMENT of PARTS  
•
When replacement of parts is required, be sure the service technician uses replacement parts specified by the  
manufacturer or those that have the same characteristics as the original part. Unauthorized substitution may  
result in additional damage to the unit.  
**  
**  
Warning  
**  
1. To avoid damage of the power cord or plug;  
•
•
•
•
Do not modify or process the power cord or plug arbitrarily.  
Do not bend or twist the power cord.  
Make sure to disconnect the power cord holding the plug.  
Keep heating appliances as far as possible from the power cord in order to prevent the cover vinyl from  
melting.  
•
**  
The mains plug, as a disconnection device, shall remain readily accessible by the user.  
2. To avoid electrical shock;  
•
•
•
Do not open the main body.  
Do not insert metal or inflammable objects inside the product.  
Do not touch the power plug with wet hands.  
Disconnect the power cord in case of lightning.  
•
**  
3. To avoid damage of product;  
•
Do not use the product when it is out of order. If you continue to use the product when defective, serious  
damage can be caused to it. Make sure to contact your local product distributor if the product is out of order.  
•
Do not insert metal or alien substance into the slots for the modules or Smartcards. It may cause damage to  
the product and reduce its life span.  
**  
4. Hard Disk Drive  
•
Do not move the product or turn the power off suddenly while the hard disk drive is running. The company  
shall not be liable for any corruption of data on the hard disk drive caused by the carelessness or misuse of  
users.  
GB 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
1. Before Using the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
1.1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
1.2 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
1.3 Conditional Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
1.4 Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
1.5 Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
2. Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
2.1 Connecting the Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
2.2 Connecting the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
2.3 Connecting the TV and VCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
2.4 Connecting the Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
2.5 Powering On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
3. Installation Wizard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
3.1 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
3.2 Country. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
3.3 Channel Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
3.4 Time Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
3.5 Result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
4. Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
4.1 Switching Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
4.2 Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
4.3 Teletext. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
4.4 Programme Information (i-plate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
4.5 Option List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
5. PIP and Time Shifted Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
5.1 Picture-in-Picture (PIP) Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
5.2 Time Shifted Recording (TSR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
6. Recording and Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
6.1 Instant Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
6.2 Recording Schedule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
6.3 Programme Playback in the Play List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
6.4 Chase Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
6.5 Editing Recorded Programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
6.6 MP3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
6.7 Digital Album . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
6.8 HDD Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
6.9 Recording’s Start/End Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
6.10 Re-recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
6.11 File Download from PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
7. Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
7.1 Displaying and Switching Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
7.2 Changing Channel List Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
7.3 Edit Channel Lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
7.4 Edit Favourite Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
GB 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
8. Programme Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
8.1 Viewing Programme Guide Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
8.2 Finding a Programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
8.3 Viewing Reserved Programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
9. Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
9.1 Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
9.2 Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
9.3 Time Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
9.4 A/V Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
9.5 Miscellaneous Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65  
10. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
10.1 Automatic Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
10.2 Linear Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
10.3 Manual Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69  
10.4 Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71  
10.5 Default Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72  
11. Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73  
11.1 OTA (Over the Air) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73  
11.2 Updating Software from Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
11.3 Software Update from PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77  
12. System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78  
12.1 Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78  
12.2 Signal Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78  
12.3 Conditional Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79  
13. Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80  
14. Menu Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81  
15. Trouble Shooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82  
15.1 Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82  
15.2 Error Message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84  
16. Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85  
17. Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86  
18. Service and Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87  
GB 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Before Using the Product  
1. Before Using the Product  
This chapter describes detail instructions on the product and its accessories.  
1.1 Package Contents  
Please check all package contents before using the product.  
**  
**  
Remote Control  
User's Manual  
SCART Cable  
Quick Guide  
Batteries  
CD-ROM  
**  
Note:  
•
Faults may occur if the remote control is left without a battery for a long time. Always keep the battery inserted in  
the remote control.  
•
Package contents may vary according to area.  
CD-ROM contains USB driver and application.  
•
**  
Warning:  
•
•
•
The company shall not be liable for problems caused by changing hard disk drive by user.  
This product provides best performance with Seagate ST3160022ACE(160G) hard disk drive.  
The company shall not be liable for problems caused by the installation of hard disks bigger than 160GB.  
GB 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Before Using the Product  
1.2 Front Panel  
**  
1. STANDBY BUTTON  
Switches between operation and standby modes.  
**  
2. RECORD BUTTON  
Records programme.  
**  
3. STOP BUTTON  
Stops recording.  
**  
4. PLAY BUTTON  
Plays programme.  
**  
5. PAUSE BUTTON  
Pauses programme.  
**  
6. SOURCE BUTTON  
Selects the input source between TV and the product.  
**  
7. CH-/CH+ BUTTON  
Moves the TV/radio channel up/down.  
**  
8. USB DEVICE  
Connect to the PC port. (For moving the information of digital album or MP3 to the PC.)  
**  
9. SMARTCARD SLOT  
A slot for a Smartcard  
**  
Note: The front of the product is subject to change without notice.  
GB 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.3 Conditional Access  
Although some TV and radio channels are free to air, most TV and radio/music channels are available on a subscription  
basis and can only be enjoyed via a Conditional Access component. The Conditional Access component is a removable  
Smartcard.  
1. Inserting the Smartcard  
The Smartcard looks similar to a credit card and is inserted into the slot behind the right-hand front flap of the product. A  
valid Smartcard entitles you to view and listen to all the channels you choose to subscribe to. The Smartcard slot on the  
product can be used for Conax Smartcard only.  
1. Open the right-hand flap on the front panel of the produc to expose the card slot.  
2. Hold the Smartcard horizontally with the electronic chip (small square-shaped, gold in colour) facing upwards.  
3. Insert the Smartcard into the slot.  
**  
GB 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Before Using the Product  
1.4 Rear Panel  
**  
1. CABLE IN  
Connects a network cable.  
**  
2. CABLE OUT  
Connects to the RF IN of the TV or VCR using a RF cable.  
**  
3. TV SCART  
Connects to the TV using a TV SCART cable.  
**  
4. VCR SCART  
Connects to the VCR or DVD using a VCR SCART cable.  
**  
5. AUDIO L/R  
Connects to the TV or VCR using a RCA cable.  
**  
6. VIDEO  
Connects to the TV or VCR using a RCA cable.  
**  
7. RS-232C  
Connects a PC for software update.  
**  
8. S/PDIF  
Connects to the audio system using an S/PDIF cable. (digital audio)  
**  
9. ON/OFF  
Power on/off.  
**  
Note: The rear of the product is subject to change without notice.  
GB 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.5 Remote Control  
**  
**  
Note: The remote control of the product is subject to change without notice.  
GB 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Before Using the Product  
1. STANDBY  
9. i (INFORMATION)  
Switches between operation and standby modes.  
Displays the channel and programme  
**  
information.  
**  
2. NUMERIC(0-9) BUTTONS  
Enters a TV/radio channel number or menu  
10.Group 10  
**  
option number.  
g.  
SOURCE  
**  
Selects the input source between TV and  
3. LIST  
the product.  
Displays the channel list.  
**  
**  
h.  
i.  
TV/RADIO  
4. PLAYBACK CONTROL BUTTONS  
Switches between TV and radio modes.  
**  
**  
a.  
FAST REWIND  
Rewinds at high speed. Each time you  
WIDE  
press this button the rewind speed is  
Sets the display format.  
**  
increased.  
**  
j.  
SUBTITLE  
b.  
c.  
PLAY  
Displays the subtitle language list.  
**  
Plays at normal speed or resumes.  
**  
k.  
l.  
SOUNDTRACK  
FAST FORWARD  
Displays the soundtrack list.  
**  
Fasts forward at high speed. Each time you  
A-B  
press this button the fast forward speed is  
Plays back a specified block repeatedly.  
increased.  
**  
**  
m.  
TEXT  
d.  
e.  
f.  
RECORD  
Switches between the teletext and TV  
Records programme.  
**  
modes.  
**  
PAUSE  
n.  
o.  
BOOKMARK LIST  
Pauses the live programme or recording.  
**  
Displays the list of saved viewing  
STOP  
positions.  
**  
Stops a recording or goes to the live  
SLOW MOTION  
programme.  
**  
Plays the programme in slow motion. Each  
time you press this button, speed is  
5. MENU  
slowed progressively more.  
Displays the main menu.  
**  
**  
p.  
G (Game)  
6. ARROW BUTTONS  
Displays the games.  
Changes the channel or moves the cursor up,  
**  
down, left or right.  
**  
11.PLAY LIST  
7. EXIT  
Displays the recorded programme list.  
**  
Exits all On-Screen Display (OSD) screens.  
**  
8. VOL+/VOL-  
Adjusts the audio volume.  
**  
GB 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12.Group 12  
16.CH+/CH- or PAGE+/PAGE-  
**  
Changes the channel or page.  
q.  
OPT+ (RED)  
Displays the channel attributes while  
watching a programme.  
**  
17.MUTE  
Mutes or unmutes the audio temporarily.  
**  
**  
r.  
s.  
t.  
INSTANT REPLAY (GREEN)  
18.PIP BUTTONS  
Jumps back and plays from that location.  
**  
**  
u.  
v.  
PIP  
COMMERCIAL SKIP (YELLOW)  
Displays the PIP (Picture in Picture)  
Jumps ahead in a recording.  
screen.  
**  
**  
ADD BOOKMARK (BLUE)  
PIP CH LIST  
Saves the current viewing position as a  
Displays the PIP channel list while  
bookmark.  
displaying the PIP (picture in picture)  
**  
screen.  
**  
13.GUIDE  
w.  
x.  
y.  
**  
PIP CH+/CH-  
Displays the programme guide.  
Changes the PIP channel.  
**  
**  
14.OK  
MOVE PIP  
Selects a menu or confirms the selected  
Changes the position of the PIP screen.  
operation. Also, displays the channel list while  
**  
watching a programme.  
SWAP PIP  
Swaps the focus between the main and  
the PIP screen.  
**  
15.BACK  
Closes and returns to the previous menu and  
screen.  
**  
GB 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Setup  
2. Setup  
This chapter describes how to connect the product to the TV with the particular equipments for gaining optimum signal  
quality. The product provides various interfaces to connect to the TV, VCR or other devices. Select the most appropriate  
procedure depending on the equipment you have.  
Note: If you encounter any problems setting up your product, please contact your local product distributor.  
2.1 Connecting the Cable  
Connect your CATV line to the CABLE IN.  
**  
Note: Connect the product and the TV using a RF cable to watch analogue channels.  
GB 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.2 Connecting the TV  
1. Using SCART Cable  
Connect the product and the TV using a SCART cable.  
**  
GB 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Setup  
2. Using RCA Cable  
Connect the product and the TV using a RCA cable.  
**  
GB 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.3 Connecting the TV and VCR  
1. Using SCART Cable  
Connect the product and the TV/VCR using a SCART cable.  
**  
GB 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Setup  
2.4 Connecting the Audio System  
Select the most appropriate procedure for your convenience.  
•
Connect the product and the audio system using a RCA cable.  
•
Connect the product and the Dolby Digital decoder for higher quality sound using an S/PDIF cable.  
**  
GB 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.5 Powering On  
1. Connect the power cord of the product to a wall outlet.  
2. Turn on the power switch located at the back left of the product.  
**  
3. Power on by pressing the STANDBY  
button of the remote control or  
the STANDBY button at the front of the product.  
GB 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Installation Wizard  
3. Installation Wizard  
When powering on the product for the first time after purchasing, the installation wizard will operate automatically.  
You can easily set-up using simple organisation and options and watch the broadcasting after completing the set-up  
procedure. You can select items using the NUMERIC(0-9) buttons.  
**  
Note:  
•
If you press the BACK  
wizard, you can return to the previous screen.  
button or select Back and press the OK  
button while running the installation  
•
•
The options given of the installation wizard may vary according to area.  
The default password is 0000. If you have forgotten your password, please contact your local product distributor.  
3.1 Language  
Select the appropriate language from the list using the  
button and  
press the OK  
or button to save the selected language as a default  
language for menu, subtitle and audio.  
3.2 Country  
You can select country.  
Select the appropriate country from the list using the  
button and  
press the OK  
or button.  
GB 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.3 Channel Search  
Please wait until the channel search is complete.  
1. During the channel search, the cursor is located at Stop.  
Therefore, if you press the OK  
search will stop and the channels found until then will be  
displayed.  
button during the search, the  
2. If the search does not find any channels, then press the OK  
or button to access the installation menu to search for the  
channels again. Please make sure that you have connected your  
aerial correctly.  
3. You can delete unwanted channels from the found channels.  
Select the channels to delete and press the OK  
button.  
button. To delete all  
channels, select Select All to select all channels, select Delete  
and press the OK button.  
Then select Delete and press the OK  
**  
4. After completing the channel search and deleting unwanted  
channels, select Save and press the OK  
button to save the  
changes.  
3.4 Time Setting  
You can set the GMT offset for the current time.  
1. Select GMT Offset using the  
button and press the OK  
or button.  
2. Select your GMT offset using the  
button and press the OK  
button. GMT is changed by from 30 minutes to 1 hour.  
3. Then select Next using the  
button and press the OK  
button.  
**  
Note: The current time is set automatically whenever GMT offset  
changes.  
GB 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Installation Wizard  
3.5 Result  
Select Finish in the result screen and press the OK  
button to finish  
the installation wizard.  
**  
Warning: If you exit the install wizard without fully completing the  
channel searching procedure, you may not have all of the  
channels available. In this case, you can use the  
installation menu to search for the channels.  
GB 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Basic Operation  
4. Basic Operation  
This chapter describes functions such as switching channel, volume control and basic features for watching  
programmes.  
4.1 Switching Channel  
You can switch the current channel using one of the following methods.  
1. Press the CH+/CH-  
2. Enter the channel number using the NUMERIC(0-9) buttons to go to the channel directly.  
3. Press the TV/RADIO button to switch between TV channel and radio channel.  
or  
button .  
**  
Note: You can switch channel using the channel list or programme guide. Please refer to Chapter 7. Channel  
List and 8. Programme Guide for more information.  
**  
4.2 Volume Control  
1. Press the VOL+/VOL-  
or  
button to adjust the audio volume.  
2. Press the MUTE  
button to stop the audio temporarily.  
**  
Note: The mute function remains set while you switch channels.  
4.3 Teletext  
When the channel supports teletext, the teletext icon  
1. Press the TEXT button.  
is displayed on the i-plate.  
2. To display teletext menu, press the MENU  
button in teletext  
button and  
mode.  
3. Select the teletext function you want using the  
press the OK  
button.  
4. To view the teletext page, use the  
button.  
or CH+/CH-  
Teletext Functions  
Index  
Returns to index page. If there is no index page, jumps to page 100.  
Searches the sub-page using the sub-code written by users.  
Adjusts transparency of teletext screen.  
Sub-page  
Mix  
Cancel  
Reveal  
Hides the teletext except page number.  
Displays the concealed information.  
Double Size Displays the text size as double size.  
Page Hold Holds the current page not updating it.  
GB 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Basic Operation  
4.4 Programme Information (i-plate)  
Programme information is always displayed for a certain period of time whenever you switch channels. You can view  
the programme information by pressing the i  
button while watching a programme. Press the EXIT  
button to  
hide the i-plate.  
1. General Information  
The general information is displayed as follows on the screen.  
**  
**  
1. Channel number and name  
2. Programme name  
3. Detailed programme information: Displayed if detailed programme information is provided.  
4. Current channel list and programme genre  
5. Current time  
6. Icons  
Displayed only if the programme is recording.  
Displayed only if the programme is reserved.  
Represents parental control level.  
Indicates age classification level-if supplied by the broadcaster  
Displayed only when the channel is a locked channel.  
Displayed only when the channel is a scrambled channel.  
Displayed when subtitle information is available.  
Displayed only when there is any teletext information.  
Displayed only when the programme is broadcast in Dolby Digital.  
Displayed when the programme is replaced with another programme.  
**  
7. Next programme Information: Displayed if next programme information is provided. Press the button to display  
the next programme information.  
8. Programme broadcasting time and progress bar: Displays programme playing time and progress bar.  
**  
Note: The programme information will only be displayed when supplied by the broadcaster.  
GB 24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Detailed Programme Information  
You can see detailed information about the current programme. Press  
the i  
button when the i-plate is displayed to view detailed  
information.  
**  
Note:  
•
•
Press the i  
button again to hide the information box.  
If the detail information is more than one page, use the  
button to move to the previous/next page.  
4.5 Option List  
You can view and confirm detailed information about the current channel and change the information if necessary.  
1. Adding a Channel to Favourite Group  
You can add the current channel to favourite group immediately. Also, you can add channels to favourite groups.  
1. Press the OPT+  
button.  
2. Select Favourite using the  
button and press the OK  
button and press the OK  
or button.  
3. Select favourite group using the  
button to register for favourite group.  
4. Press the OK button again on the selected favourite group  
to release the registered channel.  
5. Move to the parent menu using the button to save the changes  
automatically.  
**  
Note: For detailed information about how to change favourite group name and how to register favourite channels from  
the complete channel list, please refer to Chapter 7. Channel List.  
GB 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Basic Operation  
2. Subtitle  
If the current programme provides subtitle information, you can select the language for the subtitle.  
1. Press the OPT+  
button.  
2. Select Subtitle using the  
button and press the OK  
or  
button.  
3. Select the subtitle language using the  
OK  
button and press the  
button. The subtitles will be displayed at the bottom of  
the screen.  
4. Select Off from the subtitle menu to switch the subtitles off.  
**  
**  
Note:  
•
You also can change the subtitle by pressing the SUBTITLE  
button on the remote control.  
•
•
You can select a default subtitle language in MENU–Preferences–Language Setting–Subtitle Language.  
You can use the hard of hearing subtitle if supplied by the broadcaster.  
GB 26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Soundtrack  
If the current programme is available in multiple audio languages, you can select the language that you wish to listen to.  
1. Press the OPT+  
button.  
2. Select Soundtrack using the  
button and press the OK  
or button.  
3. Select the audio language using the  
button.  
4. Select soundtrack direction(left, right, stereo) using the  
button.  
5. Press the EXIT  
or SOUNDTRACK  
button to exit the  
soundtrack list.  
**  
**  
Note:  
•
You also can set the soundtrack by pressing the SOUNDTRACK  
button on the remote control.  
•
You can select the default audio language you want in MENU–Preferences–Language Setting–Audio  
Language.  
GB 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Basic Operation  
4. Locking/Unlocking a Channel  
You can lock or unlock the current channel while watching a programme.  
1. Press the OPT+  
button.  
2. Select Lock/Unlock using the  
button and press the OK  
button and press the OK  
button and press the OK  
or button.  
3. Select Lock option using the  
button.  
4. Select Unlock option using the  
button.  
5. You will be prompted to enter the password. Enter the password  
to unlock the channel.  
6. Move to the parent menu using the button to save the changes  
automatically.  
**  
Note:  
•
When switching to the locked channel, you must enter the password to view the channel.  
•
The default password is 0000. If you have forgotten the password, please contact your local product distributor.  
5. Deleting a Channel  
You can delete the current channel while watching a programme.  
1. Press the OPT+  
button.  
2. Select Delete using the  
button and press the OK  
or  
button.  
3. Select Yes in the confirmation message and press the OK  
button.  
4. Enter the password using the NUMERIC(0-9) buttons to delete  
the current channel.  
**  
Note: The default password is 0000. If you have forgotten the password, please contact your local product distributor.  
GB 28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. PIP and Time Shifted Recording  
5.1 Picture-in-Picture (PIP) Screen  
If you press the PIP  
button on the remote control while watching TV, you  
can watch two channels at the same time. The audio from the main screen will  
be outputted.  
Each time you press the PIP  
button, the PIP screen moves in order of 1:6  
-> 1:1-> Normal, as displayed in the following figure.  
**  
1:6 PIP screen  
Normal screen  
1:1 PIP screen  
**  
**  
**  
Note:  
•
The PIP screen is available only when you are watching TV channels. You cannot use the PIP function for radio  
channels.  
•
The teletext is only available on the main screen.  
**  
1. Swapping the PIP Screen  
This function is available in 1:6 PIP or 1:1 PIP.  
Press the SWAP PIP  
screen for the PIP screen. Press the CH+/CH-  
button on the remote control to swap the main  
button to change the  
main screen channel.  
**  
Note: You cannot use the SWAP PIP function in the following cases:  
1. When you are watching a radio channel.  
2. When the screen displays the channel list, audio and detail  
information.  
GB 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. PIP and Time Shifted Recording  
2. Moving the PIP Screen (Only for 1:6 PIP Screen)  
Use the MOVE PIP  
button on the remote control to move the position of  
the PIP screen.  
**  
Each time you press the MOVE PIP  
button, the PIP screen moves in the order of  
, as displayed in the  
following figure.  
**  
3. Switching Channels in the PIP Screen  
You can switch the PIP channel.  
1. Press the PIP  
button on the remote control to display the PIP  
screen.  
2. Press the PIP CH+/PIP CH-  
button to change the channel on the  
PIP screen only.  
3. To display the PIP channel list, press the PIP CH LIST  
button.  
Select a channel using the  
change the PIP channel.  
button and press the OK button to  
GB 30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.2 Time Shifted Recording (TSR)  
You can perform TSR (Time Shifted Recording) and other functions similar to VCR functions using the playback control  
buttons while playing a programme.  
The product automatically saves the programme in the embedded hard disk drive temporarily, so that users can pause,  
play, fast rewind, fast forward, replay, etc. even while watching the currently broadcasting TV programme.  
1. Time Bar  
If you press the PLAY  
button while watching TV, the time bar information will be displayed. Time bar displays the  
current operation status, the time gap between the broadcasting point and watching point and the amount of temporarily  
saved programme.  
**  
**  
1. Operation status  
4. Watching point  
2. Watching point time (hh:mm:ss)  
3. The amount of saved programme  
5. Broadcasting (Live) point  
6. Current time (hh:mm)  
2. Pause  
If you press the PAUSE  
button on the remote control, the current programme is paused. If you press the PAUSE  
button once again, the programme is resumed from that point.  
**  
Note: Pause makes the time gap or delay between the broadcasting (live) point and watching point. The time gap  
is equivalent to the period the programme was paused. Operations like slow motion and fast rewind also  
make the time gap. Press the STOP  
button to go to the live programme.  
GB 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. PIP and Time Shifted Recording  
3. Fast Rewind to Previous Scene  
Press the FAST REWIND  
button on the remote control to watch the scene passed by. Each time you press the  
FAST REWIND  
button, the rewind speed increases. ( x 2, x 4, x 16, x32, x 64)  
**  
If you press the PLAY  
button, the fast rewind operation stops and the programme is played at normal speed.  
Note: You can fast rewind back to the start point. If you reach the start point while rewinding, the programme is  
automatically played at normal speed from that point.  
4. Fast Forward to the Next Scene  
Press the FAST FORWARD  
Each time you press the FAST FORWARD  
button on the remote control to fast forward the programme.  
button, the speed increases. ( x 2, x 4, x 16, x32, x 64)  
**  
If you press the PLAY  
button, the fast forward operation stops and the programme is played at normal speed.  
Note: You can use the fast forward operation only when there is a time gap between the current watching point  
and the broadcasting (live) point caused by some previous operations such as pause, slow motion or fast  
rewind. You can fast forward to the current broadcasting point. If the watching point reaches the  
broadcasting (live) point, the programme is automatically played at normal speed.  
5. Recording  
Press the RECORD  
button on the remote control to record the current programme immediately . While the time  
shift operation records the programme temporarily, this record operation records the programme permanently so you  
can playback the recorded programme at any time. For more information about recording, refer to Chapter 6.  
Recording and Playback.  
**  
Adjusting the Recording End Time  
Press the RECORD  
time by -/+10 minutes using the  
hide the message screen.  
button while recording to adjust the recording end time. You can adjust the recording end  
button, and then press the OK  
button to change the recording end time and  
**  
GB 32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Additional Time Shift Operations  
You can perform additional time shift operations using the following buttons on the remote control.  
**  
Direct Jump  
Press the PLAY  
progress bar. Move this arrow to a time point using the  
button while watching TV. If you press the  
button, a moving arrow will appear in the  
button to play the  
button and then press the OK  
programme from the specified time point. You can also move to the specified time point directly by entering the time you  
want using the NUMERIC(0-9) buttons.  
**  
Instant Replay  
Press the INSTANT REPLAY  
button to jump back and play from that  
location. When the replay has been completed the programme will play from the  
current point. Refer to 9.5 Miscellaneous Settings.  
**  
Commercial Skipping 30 seconds  
Press the COMMERICAL SKIP  
button jump ahead in a recording. You can  
use the skip operation only when there is a time gap between the current  
watching point and the broadcasting point while using the fast forward  
operation. If the time gap is less than 30 seconds, the programme is played  
from the current broadcasting point. Refer to 9.5 Miscellaneous Settings.  
**  
Slow Motion  
Press the SLOW MOTION  
button to play the current programme in slow  
motion. Each time you press the SLOW MOTION  
decreases (x 1/2 , x 1/4, x 1/8). Press the PLAY  
slow motion and return to normal speed.  
button, the speed  
button to stop playing in  
GB 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. PIP and Time Shifted Recording  
Repeat Mode  
You can select a specific block within a recorded programme and play it back  
repeatedly. Press the A-B  
the second position using the  
button to set the first repeating position. Select  
button and press the OK  
button. Then  
the programme plays back the selected block repeatedly. To stop the repeat  
mode, press the A-B  
button while repeating the selected block.  
Press the STOP  
button to stop playing the saved programme and watch  
the current programme on air.  
**  
Bookmark  
You can jump to a position directly using the bookmark in recorded  
programme playback. Use bookmarks to search positions quickly and  
easily.  
**  
•
Adding a bookmark  
Press the ADD BOOKMARK  
button at a certain position to set a  
bookmark while playing back a recorded programme.  
Note: The bookmark function is only available for recorded  
programmes.  
**  
•
Deleting a bookmark  
Press the BOOKMARK LIST  
button after adding a bookmark and  
**  
select the bookmarked position using the  
button. Press the ADD  
BOOKMARK  
button to delete a bookmark.  
Note: Press the BOOKMARK LIST  
or EXIT  
button to exit  
the bookmark list screen.  
**  
•
Going to a bookmark  
Press the BOOKMARK LIST  
button. Select the bookmarked  
position using the  
button and press the OK  
button. Then the  
programme plays from the bookmarked position.  
GB 34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Recording and Playback  
**  
6. Recording and Playback  
Using the built-in hard disk drive, you can record a programme without an external media device such as a VCR.  
6.1 Instant Recording  
Press the RECORD  
current programme instantly. You can select the point you want to  
record using the button. Press the RECORD button to start  
button on the remote control to record the  
instant recording from that point.  
**  
To record another channel, change channels while recording and press  
the RECORD button again. You can record up to two channels  
simultaneously. While doing so, you can perform TSR (Time Shifted  
Recording) and view the programmes on air.  
**  
If you press the STOP  
button while recording two other channels,  
you will be prompted to select a recording you wish to stop.  
**  
**  
If you press the RECORD  
button while recording two other  
channels, you will be prompted to select a recording you want to stop  
and replace with a new recording.  
**  
Notice:  
•
Ensure that there is enough free space before recording. If the  
free space on the hard disk drive is insufficient, recording will  
stop. Recording one hour of programme may require up to 2 or  
3GB of hard disk space. The space for recording a 1 hour  
programme may differ depending on the programme.  
•
You can record radio programmes also.  
GB 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Recording and Playback  
6.2 Recording Schedule  
You can set a programme to record automatically in Menu-Record-Recording Schedule.  
1. Press the MENU  
button.  
2. Select Record using the  
button and press the OK  
or  
button.  
3. Select Recording Schedule using the  
button and press  
the OK  
or button to display the reserved recording list on  
the screen.  
**  
Note: You can schedule recording easily using the programme  
guide. Refer to Chapter 8. Programme Guide.  
1. Selecting/Unselecting Reserved Programmes  
1. Select a programme and press the GREEN button. You can  
select multiple programmes.  
2. To unselect the selected programmes, press the GREEN button  
again.  
2. Deleting Reserved Programmes  
1. After selecting reserved programmes using the GREEN button,  
press the RED button.  
2. Select Yes and press the OK  
button to delete the reserved  
programmes.  
GB 36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Adding a Reservation  
1. Press the YELLOW button to add a new reservation.  
2. Select Channel and Date. Press the button to display channel  
and date lists and select one item using the  
button and OK  
button. You can also select a channel using the  
NUMERIC(0-9) buttons.  
3. Select Start/End Time using the  
button and press the  
button to move back 1 minute or move 1 minute ahead. To  
change the time using the NUMERIC(0-9) buttons, press the OK  
button.  
4. Select Repeat mode among ONCE, DAILY, WEEKLY,  
WEEKDAY(Mon-Fri) and WEEKEND using the  
button.  
5. Select Lock mode using the  
6. Select Save and press the OK  
7. Select Cancel and press the OK  
button.  
button to save the changes.  
button to cancel the reservation.  
8. If the channel is locked, you will be prompted to enter the password to complete the reservation.  
**  
Note:  
•
The recording schedule can be overlapped with up to two other programmes.  
The Power On/Off time can overlap the recording schedule.  
•
•
The default password is 0000. If you have forgotten the password, please contact your local product distributor.  
4. Sorting by Time/Name  
Each time you press the BLUE button, the sorting order of the reserved programmes change in the following sequence:  
by descending time, by ascending time, by name.  
5. Editing a Reserved Programme  
1. Select a programme you want to edit and press the OK  
button.  
2. For more information about how to edit the information, refer to  
6.2.3 Adding a Reservation.  
GB 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Recording and Playback  
6.3 Programme Playback in the Play List  
You can playback the recorded programme by pressing the PLAY LIST  
button. You can switch among VIDEO  
(TV), AUDIO (radio) and Selected Files list using the  
button.  
1. VIDEO/AUDIO List  
1. Select VIDEO/AUDIO list using the  
button.  
2. If you select programmes using the GREEN button, the  
programmes you select will add to Selected Files list  
automatically.  
**  
Note:  
•
For more information about Delete, Select, Sort and Play, refer  
to 6.3.2 Selected Files List.  
•
Move is inactivated in VIDEO/AUDIO list.  
2. Selected Files List  
1. Select Selected Files list using the  
button.  
2. Select the programmes and press the GREEN button to select  
the recorded programmes. To unselect the selected  
programmes, press the GREEN button again.  
3. Select the programmes you want to remove using the GREEN  
button and press the RED button to remove the recorded  
programmes from Selected Files list.  
4. Select the programmes you want to move using the GREEN  
button and press the YELLOW button. Move the cursor to the  
destination using the  
A pop-up will appear. Select Yes and press the OK  
button and press the OK  
button.  
button.  
5. Each time you press the BLUE button, the sorting order of the  
recorded programmes change in the following sequence: by  
descending time, by ascending time, by name.  
6. Select programmes you want to playback using the GREEN button and press the OK  
or PLAY  
button  
to play the recorded programmes. The programmes will be played in the selected order.  
**  
Note:  
•
You also can playback the recorded programme in Menu–Record–Recorded Programme. Please refer to 6.5.6  
Playing a Recorded Programme.  
•
•
You can playback the programme currently being recorded. For more information, refer to 5.2.5 Recording.  
Certain parts of the programme may blink when playing back a recorded programme in case the recording mode  
is switched from scramble to descramble or vice versa.  
GB 38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.4 Chase Play  
You can watch the programme from the beginning as the rest of the programme is simultaneously being recorded.  
While recording two channels simultaneously, you can perform TSR (Time Shifted Recording) using the playback  
control buttons.  
**  
Note: You can playback the programme being recorded after it has been recorded for at least 30 seconds.  
**  
6.5 Editing Recorded Programmes  
1. Press the MENU  
button.  
2. Select Record using the  
button and press the OK  
or  
button.  
3. Select Recorded Programme using the  
the OK  
button and press  
or button. The recorded programme list appears.  
**  
Note: The programme being recorded will be added to the recorded  
programme list after it has been recorded for at least 30  
seconds.  
1. Selecting/Unselecting Recorded Programmes  
1. Select a programme and press the GREEN button. You can select multiple programmes.  
2. To unselect the selected programmes, press the GREEN button again.  
2. Deleting Recorded Programmes  
1. After selecting reserved programmes using the GREEN button,  
press the RED button.  
2. Select Yes and press the OK  
button to delete the recorded  
programmes.  
**  
Note:  
•
If the protect option of the programme is set to Enable, you  
cannot delete the programme. Please refer to 6.5.4 Changing  
the Attribute.  
•
When not using the GREEN button, the file the cursor is located  
at will be deleted.  
GB 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Recording and Playback  
3. Editing the Recorded Programme  
1. Select a programme and press the YELLOW button to edit the  
recorded programme.  
2. A pop-up will appear. Select Edit and press the OK  
button.  
3. You can edit the recorded programme using the following  
functions.  
**  
Note:  
•
When selecting multiple programmes, To do is inactivated.  
•
You can edit recorded TV (Video) channels only.  
**  
Save  
You can save the selected recording part as a different file.  
Select the starting point using the  
button and press the RECORD  
button. Select the ending point using the  
button and press  
the RECORD  
button.  
Press the STOP  
press the OK  
button. A pop-up will appear. Select Save and  
button to save the selected part.  
Select Reset and press the OK  
button to reset the edit.  
**  
Delete  
You can delete the selected recording part.  
Select the starting point using the  
button and press the RECORD  
button. Select the ending point using the  
button and press  
the RECORD  
button.  
Press the STOP  
press the OK  
button. A pop-up will appear. Select Delete and  
button to delete the selected part.  
Select Reset and press the OK  
button to reset the edit.  
Note:  
•
•
You can select several parts simultaneously.  
After selecting the point you want using the  
pressing the OK button.  
button, you can view the scene of the point you select by  
GB 40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Split  
You can split the recorded programme into separate recordings.  
Select the point you want to split using the  
button and press the  
RECORD  
button.  
Press the STOP  
button. A pop-up will appear.  
Select Yes and press the OK  
button to split the selected point.  
4. Changing the Attribute  
1. Select a programme and press the YELLOW button to change  
the attribute of the recorded programme.  
2. A pop-up will appear. Select File and press the OK  
3. Select Programme in the File using the button and press  
the OK or button to display a keyboard on the screen.  
Enter the programme name on the keyboard. Select OK and  
press the OK button to complete.  
4. Select Protect in the File using the  
OK or button to change Enable/Disable. You have to  
enter a password to change the status from Enable to Disable.  
5. Select Lock in the File using the button and press the OK  
button.  
button and press the  
or button to change Enable/Disable. You have to enter a  
password to change the status from Enable to Disable.  
**  
6. After editing, you have to select Save and press the OK  
button to save your changes.  
Displayed when the recording is stopped because of  
an unexpected error.  
Displayed when the channel is protected from  
deleting and editing.  
Displayed when the channel is a locked channel.  
**  
Note:  
•
If the protect option of the programme is set to Enable, you cannot delete the programme.  
•
•
The default password is 0000. If you have forgotten the password, please contact your local product distributor.  
If the lock option of a programme is configured to Enable, you have to enter a password to playback the  
programme.  
GB 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Recording and Playback  
5. Sorting by Time/Name  
Each time you press the BLUE button, the sorting order of the recorded programmes change in the following sequence:  
by descending time, by ascending time, by name.  
6. Playing Recorded Programmes  
1. Select programmes you want to playback and press the OK  
or PLAY  
button.  
2. The recorded programme will start to play.  
**  
6.6 MP3  
You can enjoy the music or edit the MP3 list in Menu–Record–MP3.  
1. Press the MENU  
button.  
2. Select Record using the  
button and press the OK  
or  
button.  
3. Select MP3 using the  
button and press the OK  
or  
button. The MP3 list appears.  
1. Playing MP3  
Select the file you wish to playback using the  
button and then press the PLAY  
or OK  
button. Press the  
STOP  
button to stop playing the current file. And press the PAUSE button to pause the current file.  
2. Downloading MP3 Files  
You can download MP3 files stored on the computer via Universal Serial Bus (USB). For more information, refer to 6.11  
File Download from PC.  
GB 42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.7 Digital Album  
You can view or edit the photos in Menu–Record–Digital Album.  
1. Press the MENU  
button.  
2. Select Record using the  
button and press the OK  
or  
button.  
3. Select Digital Album using the  
button and press the OK  
or button. The digital album list appears.  
**  
1. Digital Image Browsing  
Select a image you wish to browse using the  
button and then press the OK  
button to enlarge the image.  
Press the PLAY  
button to view photos as slide show. Move the previous/next screen using the  
button.  
Note:  
•
•
Press the BACK  
Press the EXIT  
button to thumbnail screen.  
button to exit the menu and return to the current programme.  
2. Downloading Photos  
You can download photos (only JPEG files) stored on the computer via Universal Serial Bus (USB). For more  
information, refer to 6.11 File Download from PC.  
GB 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Recording and Playback  
6.8 HDD Control  
You can check the free space of the hard disk drive and format (erase) the disk drive if necessary.  
1. Press the MENU  
button.  
2. Select Record using the  
button and press the OK  
or  
button.  
3. Select HDD Control using the  
button and press the OK  
or button.  
4. You can check the free, used, reserved and total space of the  
HDD.  
5. Select Format and press the OK  
button to remove all the  
recorded programmes saved on the HDD and initialise the HDD.  
6. Select Yes when the format confirmation message appears and  
enter a password to start formatting the HDD.  
**  
**  
Note:  
•
The format deletes all the recorded programmes saved on the  
HDD including TV, radio, MP3s and photos. Formatting does not  
delete the system files of the product.  
•
•
The default password is 0000. If you have forgotten the  
password, please contact your local product distributor.  
A certain amount of space is reserved for TSR and PIP.  
GB 44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.9 Recording’s Start/End Time  
You can set the start/end time of recording.  
1. Press the MENU  
button.  
2. Select Record using the  
button and press the OK  
or  
button.  
3. Select Recording’s Start/End Time using the  
press the OK or button.  
button and  
4. Select the time using the  
button.  
button and press the OK  
6.10 Re-recording  
You can re-record the recorded file.  
1. Press the RECORD  
button at the point you want to record while playback.  
2. Press the STOP  
button to stop recording. A pop-up message will appear. Select Yes and press the OK  
button. Then the recording will stop but the playback will continue.  
3. To find new recorded files in the play list, press the PLAY LIST  
button.  
GB 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Recording and Playback  
6.11 File Download from PC  
You can enjoy the music and view the photos by downloading the files from your PC with 'Media-e linker' programme.  
(USB cables used for external HDDs are purchasable.)  
**  
Follow the instructions to download files:  
**  
1. Double-click ‘Media eLinker Setup.exe’ on the CD-ROM to install the USB driver and application programme.  
You can also download the setup file from www.humaxdigital.com.  
2. Connect the USB on the product to the USB on the PC using a USB cable.  
3. Double-click ‘Media eLinker.exe’ to start the USB application.  
**  
For more information about how to use Media eLinker, refer to the readme file on the CD-ROM.  
**  
GB 46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Channel List  
7. Channel List  
Four types of channel lists are provided for easy and quick channel browsing.  
TV  
The list of all TV channels with two sub-groups: one is sorted by channel number, the other is sorted  
by channel name (Alphabetical).  
Radio  
Favourite  
Playlist  
The list of all radio channels with two sub-groups: one is sorted by channel number, the other is sorted  
by channel name (Alphabetical).  
You can create five favourite lists for quick and easy access to the channels you watch more often.  
Using this feature, you can skip the channels you rarely or never watch.  
You can move to the playlist to display the recorded programmes.  
7.1 Displaying and Switching Channel List  
You can display the channel list using LIST  
display the channel list by pressing the OK  
button and switch to another channel on the channel list. You can also  
button.  
1. Press the LIST  
button while watching a programme to  
display the channel list.  
2. Select a channel using the  
button to change the channel.  
button and press the OK  
3. Enter the channel number directly using the NUMERIC(0-9)  
buttons to move the cursor to the channel you want. And then  
press the OK  
button to change to the selected channel.  
**  
Note:  
•
•
If there are multiple channels, press the PAGE+/PAGE-  
button to move by page.  
Whenever you press the TV/RADIO  
button while the channel list is displayed, the channel list will switch  
between TV and radio channel lists.  
•
To display scramble icon ( ) in the channel list, select On in MENU-Preferences-Miscellaneous  
Settings-Option in CH List.  
GB 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Channel List  
7.2 Changing Channel List Group  
You can select channel list by group.  
1. Press the button while the channel list is displayed to view the  
group list.  
2. Select a channel group using the  
sub-groups.  
button to display its  
3. Press the OK  
button and then press the OK  
4. The channel list for the selected sub-group is displayed.  
or button, select a sub-group using the  
button.  
**  
Note: The favourite lists will only appear if you have created them  
first.  
7.3 Edit Channel Lists  
You can edit all channels or each channel by channel list group.  
1. Press the MENU  
button.  
2. Select Edit Channels using the  
button and press the OK  
or button.  
3. Select Edit Channel Lists using the  
button and press the  
OK  
or button.  
4. You will be prompted to enter the password. Enter the password  
using NUMERIC(0-9) buttons.  
**  
Note:  
•
Press the BACK  
EXIT button to exit the menu screen.  
or button to save the changes and return to the previous menu, press the MENU  
or  
•
•
You can easily navigate all menus using the assigned number for each menu. Press MENU-3-1 in oder to select  
Edit Channel Lists .  
The default password is 0000. If you have forgotten the password, please contact your local product distributor.  
GB 48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Selecting a Channel Group  
You can select the channel list group to edit. TV and radio sub-groups can be selected.  
1. Press the OK  
or button in group.  
2. Select the group using the  
button.  
button and press the OK  
**  
Note:  
•
Press the TV/RADIO  
channel list directly.  
button to move to the TV or radio  
•
To edit Favourite Channel List, move to MENU–Edit  
Channels–Edit Favourite Channels.  
2. Deleting Channels  
You can delete one or more channels.  
1. Move the cursor to the channel list using the  
button.  
2. Select a channel using the  
button and then press the OK  
button. You can select multiple channels.  
3. Select Delete using the button and press the OK  
button.  
3. Moving Channels  
You can move one or more channels to location you want, which changes the channel number accordingly.  
1. Move the cursor to the channel list using the button.  
2. Select the channel you want to move and press the OK  
button. You can select multiple channels.  
3. Select Move using the button and press the OK  
The selected channel disappears from the channel list  
temporarily.  
button.  
4. Move the cursor to the destination in the channel list using the  
button and press the OK  
button.  
5. The selected channel(s) is moved to the selected location in  
given order.  
**  
Note: The move function may not be supported.  
GB 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Channel List  
4. Locking/Unlocking Channels  
You can lock or unlock one or more channels.  
1. Move the cursor to the channel list using the  
button.  
2. Select a channel using the  
button. You can select multiple channels.  
3. Select Lock using the button and press the OK  
button and then press the OK  
button.  
**  
Note:  
•
When the locked channel(s) is selected or all channels are  
locked, Lock is switched to Unlock. When you select Unlock  
and press the OK  
button, locked channel is switched to an  
unlocked channel.  
•
•
Enter the password using the NUMERIC(0-9) buttons to watch  
locked channels.  
**  
The default password is 0000. If you have forgotten the  
password, please contact your local product distributor.  
**  
5. Selecting/Unselecting All Channels  
You can select or unselect all channels together.  
1. Select Select All and press the OK  
button to select all channels.  
2. Select Unselect All and press the OK  
button to unselect all the selected channels.  
GB 50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7.4 Edit Favourite Channels  
You can edit favourite channel or favourite channel list.  
1. Press the MENU  
button.  
2. Select Edit Channels using the  
button and press the OK  
button and  
or button.  
3. Select Edit Favourite Channels using the  
press the OK or button.  
4. You will be prompted to select a favourite group. Select a  
favourite group to edit using the  
button.  
button and press the OK  
**  
Note:  
•
Press the BACK  
to the previous menu. Press the MENU  
to save changes and to exit the menu screen.  
or button to save the changes and return  
**  
or EXIT button  
•
You can easily navigate all menu items using the assigned  
number for each menu. Press MENU–3–2 in order to select Edit  
Favourite Channels .  
**  
The buttons for editing the favourite channel list are described in the following table.  
Add  
Adds favourite channel.  
Remove  
TV/RADIO  
Fav.Group  
Move  
Removes from the favourite channel.  
Switches between TV and radio channel list.  
Changes favourite channel list group.  
Changes the order of channels within the favourite channel list.  
Renames the name of favourite channel list.  
Sorts channels by number or name in all TV/radio channel list.  
Unselects all selected channels.  
Rename  
Sort  
Unselect All  
GB 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Channel List  
1. Adding/Removing Favourite Channels  
You can add favourite channel(s) to a specific favourite channel list or remove the added favourite channel(s) from the  
list.  
1. Select favourite group using  
.
2. Select the channel(s) in all TV/radio channel list and press  
add favourite channel(s).  
to  
3. Select the channel(s) in favourite channel list and press  
remove favourite channel(s).  
to  
**  
Note: You can switch between TV and radio channel list using  
TV/RADIO button or  
.
**  
2. Moving Favourite Channels  
You can change the order of favourite channel(s) in the favourite channel list.  
1. Select favourite group using  
2. Select the channel(s) to move within the favourite channel list  
.
and press the OK button.  
3. Select and press the OK  
4. Move the cursor to the location you want using the  
and press the OK button.  
5. The selected channel(s) is moved to the location you selected.  
button.  
button  
GB 52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Renaming Favourite Channel List  
You can rename favourite channel list.  
1. Select favourite group to rename using  
.
2. Select  
and press the OK  
button.  
3. Enter favourite channel list name using the keyboard displayed  
on the screen.  
4. When finishing entering favourite channel list name, select OK  
and press the OK  
button.  
**  
GB 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Channel List  
4. Additional Features  
Additional features provides many useful functions.  
**  
Changing between TV and radio channel list  
You can add not only TV channel(s) but also radio channel(s) to favourite channel list. Press  
into TV or radio channels.  
to switch all channel list  
Note: You can also change to TV or radio channel by pressing TV/RADIO  
button on the remote control.  
**  
Selecting Favourite channel list  
You can select favourite channel list to edit. Press  
to display favourite channel list. Then select the channel list using  
the  
button and press the OK  
button.  
**  
Sorting a channel list  
You can sort all TV or radio channel lists by channel number or name for easy favourite channel searching. If channel  
lists are sorted by channel number, is displayed. When you press this button, all the channel lists are sorted by  
name. Or, if channel lists are sorted by channel name,  
number.  
is switched to  
. Press this button to order channels by  
**  
Unselect all the selected channels  
Press  
to unselect all the selected channels.  
GB 54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Programme Guide  
8. Programme Guide  
The programme guide displays programme information about each channel, based on the date and time. You can also  
schedule your recording using the information given.  
**  
Note: Press the BACK  
, EXIT  
or GUIDE  
button to exit the guide screen.  
8.1 Viewing Programme Guide Information  
You can view programme information for all channels.  
1. Press the GUIDE  
2. Move to previous /next programme within the same channel  
using the button.  
button.  
3. Move back 2 hours or move 2 hours ahead within the same  
channel using the FAST REWIND  
or FAST FORWARD  
button.  
4. Move to another channel using the  
button. If there are  
multiple channels, use the PAGE+/PAGE-  
button to  
move to channels by page. Also, you can enter the channel  
number using the NUMERIC(0-9) buttons on the remote control  
to move to the channel directly.  
5. Select a programme and press the OK  
button. Then you can  
watch the programme if it is on air or reserve it if it is the future  
programme.  
6. Press the i  
button in the selected programme to view the detailed information (if available) of the selected  
programme.  
1. Viewing Guide Information by Channel List Groups  
You can view programme information of the selected channel list by groups.  
1. Press the GUIDE  
2. Press the RED button to display the channel list group.  
3. Select a channel list group using the button.  
4. Move the cursor to the sub-group using the button, select a  
sub-group using the button and then press the OK  
button.  
button. The programme guide for the selected channel list is  
displayed.  
GB 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Programme Guide  
2. Viewing Programme Information Using Time Bar  
You can quickly search the time zone using the time bar.  
1. Press the GUIDE  
button.  
2. Press the GREEN button to display time bar.  
3. Select the each button using the  
button and press the OK  
button to move the time bar. If you press the button  
repeatedly, the same operation is repeated.  
4. You can also use the FAST REWIND  
and FAST  
FORWARD  
buttons on the remote control.  
5. Each button functions as follows.  
Now  
Moves to the current programme where the cursor  
is located.  
Moves back to the previous programme or 30 minutes before.  
Moves forwards to the next programme or 30 minutes ahead.  
Moves back to 2 hours before.  
Moves forwards to 2 hours ahead.  
Day  
Moves back to one day before.  
Day  
Moves forwards to one day ahead.  
**  
**  
6. Select  
button and press the OK  
button to exit the time bar.  
3. Scheduling Recording  
You can automatically schedule recording in the scheduled programme and pressing the OK  
Select the programme and press the OK button to complete  
button.  
reservation. This icon  
will be displayed. Press the OK button  
again to cancel reservation.  
**  
Note: The default password is 0000. If you have forgotten the  
password, please contact your local product distributor.  
GB 56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.2 Finding a Programme  
You can sufficiently find the programme you want by programme name or genre.  
1. Press the GUIDE  
button.  
2. Press the BLUE button.  
3. Enter the programme name directly using the keyboard displayed  
on the screen.  
4. When entering programme name is complete, select Find and  
press the OK  
button.  
**  
Note:  
•
Select the  
button and then press the OK  
button  
to enter the programme name on the keyboard screen.  
•
If you select Previous or Next on the keyboard displayed on the  
screen and press the OK  
button, the keyboard layout is  
**  
switched.  
**  
5. Select By Genre and press the OK  
button to search  
programme by genre.  
6. Select the genre using the  
button.  
button and press the OK  
7. If you select a programme from Found Programme List screen  
and press the OK button, you can watch the programme if it  
is on air or reserve it if it is the future programme. If you want to  
find another programmes, press the BLUE button to display the  
keyboard screen.  
**  
**  
Note:  
•
Each time you press the OPT+  
the found programmes change in the following sequence: by  
channel, by descending time, by ascending time.  
button, the sorting order of  
•
Found Programme List may differ depending on the provided  
programme information.  
GB 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Programme Guide  
8.3 Viewing Reserved Programme  
You can add or edit recording-reserved programmes using the schedule screen.  
1. Press the GUIDE  
button.  
2. Press the YELLOW button.  
Note: For more information about how to add or edit a reservation,  
refer to 6.2 Recording Schedule.  
GB 58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Preferences  
9. Preferences  
You can set censorship and all other items suitable for your environment.  
**  
Note:  
•
Press the BACK  
Press the MENU  
or button to save the changes and return to the previous menu.  
or EXIT button to exit from the menu screen.  
•
You can easily select all menu items using the assigned number for each menu.  
9.1 Parental Control  
You can set parental control for each programme and change the password.  
1. Press the MENU  
button.  
2. Select Preferences using the  
button and press the OK  
or button.  
3. Select Parental Control using the  
button and press the  
OK  
or button.  
4. When prompting message is displayed to ask password, enter  
the password using the NUMERIC(0-9) buttons.  
**  
Note: The default password is 0000. If you have forgotten the  
password, please contact your local product distributor.  
1. Censorship Classification  
Censorship Classification allows you to block programmes according to the age level you have set.  
1. Select Censorship Classification using the  
press the OK or button.  
2. Select the required age level using the  
the OK or button.  
button and  
button and press  
Note:  
•
You have to enter the password to watch the programme which is blocked by the age level.  
•
The default password is 0000. If you have forgotten the password, please contact your local product distributor.  
GB 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Preferences  
2. Change Password  
You can change the current password.  
1. Select Change Password using the  
button and press the  
OK  
2. Enter New Password using the NUMERIC(0-9) buttons, select  
OK and press the OK button.  
3. Enter the new password again to confirm Verify Password and  
select OK and press the OK button.  
or button.  
**  
Note: The default password is 0000. If you have forgotten the  
password, please contact your local product distributor.  
3. CA-PIN for Reservation  
You can set the CA-PIN that is automatically entered when the reserved recording starts.  
1. Select CA-PIN for Reservation using the  
2. Select Enable/Disable using the OK  
button.  
or button.  
3. When you have selected Enable, enter the CA-PIN using the  
NUMERIC(0-9) buttons.  
9.2 Language Setting  
1. Press the MENU  
button.  
2. Select Preferences using the  
button and press the OK  
or button.  
3. Select Language Setting using the  
button and press the  
OK  
or button.  
GB 60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Menu Language  
You can set the language for menu.  
1. Select Menu Language using the  
button and press the OK  
button and press the OK  
or button.  
2. Select a language using the  
button.  
2. Primary Audio/Subtitle Language  
You can set the primary language for audio and subtitle.  
1. Select Primary Audio/Subtitle Language using the  
button and press the OK  
or button.  
2. Select a language using the  
button and press the OK  
button.  
3. Secondary Audio/Subtitle Language  
You can set the secondary language for audio and subtitle.  
1. Select Secondary Audio/Subtitle Language using the  
button and press the OK  
or button.  
2. Select a language using the  
button and press the OK  
button.  
4. Audio Priority  
You can select the priority of audio.  
1. Select Audio Priority using the  
button.  
2. Select from Language and Dolby Digital using the OK  
or button.  
Language  
You can watch programme in the selected language.  
Dolby Digital  
You can listen to audio in Dolby Digital mode. When Dolby Digital is selected, the audio  
language cannot be changed.  
Note: You can choose the Dolby Digital audio stream whenever possible by selecting Dolby Digital in Audio  
Priority.  
5. Subtitle Display  
You can select to display the subtitle automatically or not.  
1. Select Subtitle Display using the  
button.  
2. Select from Auto and Manual using the OK  
or button.  
Auto  
Subtitles are displayed automatically in the predefined subtitle language.  
Manual  
Subtitles are displayed in the language when you select the subtitle language by pressing the  
SUBTITLE  
button on the remote control.  
GB 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Preferences  
6. Subtitle Font  
You can select the subtitle font .  
1. Select Subtitle Font using the  
button.  
2. Select from Variable and Fixed using the OK  
Variable Uses the horizontally variable subtitle font.  
Fixed Uses the fixed subtitle font.  
or button.  
7. Hard of Hearing Subtitles  
You can set whether or not to use the hard of hearing subtitles.  
1. Select Hard of Hearing Subtitles using the  
button and press the OK  
or button.  
2. Select Enable/Disable using the OK  
or button.  
9.3 Time Setting  
You can specify the current time and Power On/Off time.  
1. Press the MENU  
button.  
2. Select Preferences using the  
3. Select Time Setting using the  
button and press the OK  
button and press the OK  
or button.  
or button.  
1. GMT Offset  
You can set the GMT offset for the current time.  
1. Select GMT Offset using the  
button and press the OK  
or button.  
2. Select your GMT offset using the  
button and press the OK  
or button. GMT is changed by 30 minutes to 1 hour.  
**  
Note: The current time is set automatically whenever GMT offset  
changes.  
GB 62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Power On  
You can set the time when the product is automatically powered on.  
1. Select Power ON using the  
button.  
2. Select Enable/Disable using the OK  
or button.  
Enable  
Disable  
Uses Power On and sets the Power On time.  
Does not use Power On.  
**  
3. When you have selected Enable, enter Channel No. and Time  
using the NUMERIC(0-9) buttons and select OK and press the  
OK  
button.  
3. Power Off  
You can set the time when the product is automatically powered off.  
1. Select Power OFF using the  
button.  
or button.  
2. Select Enable/Disable using the OK  
Enable  
Disable  
Uses Power Off and sets the Power Off time.  
Does not use Power Off.  
**  
3. When you have selected Enable, enter Time using the  
NUMERIC(0-9) buttons, select OK and press the OK  
button.  
Note:  
•
Once Power On/Off is specified, it is repeated everyday.  
You can set the time when the product is automatically powered on/off overlapped with a recording schedule.  
•
GB 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Preferences  
9.4 A/V Control  
You can set the audio or video output control.  
1. Press the MENU  
button.  
2. Select Preferences using the  
button and press the OK  
button and press the OK  
or button.  
3. Select A/V Control using the  
or button.  
1. TV-SCART  
You can set the TV SCART output.  
1. Select TV-SCART using the  
button and press the OK  
or button.  
2. Select an option among CVBS, RGB and S-Video using the  
button and press the OK  
or button.  
2. VCR-SCART  
You can set the VCR SCART output.  
1. Select VCR-SCART using the  
button.  
2. Select from CVBS and S-Video using the OK  
or button.  
3. Audio Output  
You can set the the audio output.  
1. Select Audio Output using the  
button.  
2. Select from Stereo and Mono using the OK  
or button.  
4. Screen Ratio  
You can set the aspect ratio of your TV.  
1. Select Screen Ratio using the  
button.  
or button.  
2. Select from 4:3 and 16:9 using the OK  
GB 64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Display Format  
You can select the display format according to the TV screen ratio.  
1. Select Display Format using the  
2. If the screen ratio is set to 4:3, you can select an option among Auto, Letter Box and Center Mode using the  
button and press the OK button.  
3. If the screen ratio is set to 16:9, you can select an option among Auto, Pillar Box and Full Mode using the  
button and press the OK button.  
button and press the OK  
or button.  
9.5 Miscellaneous Settings  
1. Press the MENU  
button.  
2. Select Preferences using the  
button and press the OK  
or button.  
3. Select Miscellaneous Settings using the  
the OK or button.  
button and press  
1. i-Plate Display Time  
You can set the duration of the information box to be displayed.  
1. Select i-Plate Display Time using the  
button and press the OK  
or button.  
2. Select a value between 1 ~ 20 seconds using the  
button and press the OK or button.  
Note: When it is set to Disable, the i-plate will not be displayed when the channel is switched.  
2. OSD Transparency  
You can set the transparency of On Screen Display.  
1. Select OSD Transparency using the  
button and press the OK  
or button.  
2. Select an option among Disable, 25, 50 and 75 using the  
button and press the OK  
or button.  
Disable  
Fully opaque screen  
25, 50, 75  
The bigger the number, the more transparent the screen.  
GB 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Preferences  
3. Option in Channel List  
You can set whether or not to display the scrambled icon in channel list.  
1. Select Option in CH List using the  
button.  
2. Select On/Off using the OK or button.  
On Scramble icon is displayed in the channel list.  
Off Scramble icon disappears from the channel list.  
4. Instant Replay Time  
You can make the current programme go back 7, 15 or 30 seconds.  
1. Select Instant replay time using the  
button and press the OK  
or button.  
2. Select an option among 7, 15 and 30 using the  
button and press the OK  
button.  
button.  
5. Commercial Skip Time  
You can skip 15,30 or 60 seconds of the unwanted scenes.  
1. Select Commercial skip time using the  
button and press the OK  
or button.  
2. Select an option among 15, 30 and 60 using the  
button and press the OK  
GB 66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Installation  
10. Installation  
This chapter describes how to search for channels and other series of procedures.  
**  
Note:  
•
Press the BACK  
Press the MENU  
or button to save the changes and return to the previous menu.  
or EXIT button to exit from the menu screen.  
•
You can easily select all menu items using the assigned number for each menu.  
10.1 Automatic Search  
Having the product connected to the cable and TV, you can perform automatic search without any additional information  
necessary.  
1. Press the MENU  
button.  
2. Select Installation using the  
button and press the OK  
or button.  
3. Select Automatic Search using the  
button and press the  
OK  
or button.  
4. Automatic channel search begins.  
10.2 Linear Search  
You can search channels by defining the frequency range and other parameters. If you want to search for several  
channels only, use the linear search instead of manual search.  
1. Press the MENU  
button.  
2. Select Installation using the  
button and press the OK  
button and press the OK  
or button.  
3. Select Linear Search using the  
or button.  
4. Enter the values for Start Frequency, End Frequency, Step,  
Network Search and Append Symbol Rate.  
GB 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Installation  
1. Start/Stop Frequency  
Select Start/Stop Frequency using the  
button and press the OK  
or button. Enter the frequency using the NUMERIC(0-9) buttons.  
2. Step  
1. Select Step using the  
button and press the OK  
or  
button.  
2. Select the range of frequency to be increased by each step when  
activating channel search using the button and press the  
OK or button. Select User Define to enter the value  
directly. If you do not know the value, select Auto.  
3. Network Search  
1. Select Network Search using the  
2. Select Enable/Disable using the  
button and press the OK  
button and press the OK  
or button.  
or button.  
GB 68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Append Symbol Rate  
1. Select Append Symbol Rate using the  
button and press  
the OK  
or button.  
2. Select a symbol rate using the  
button and press the OK  
and button. Select User Define to enter the value directly.  
3. To delete all entered symbol rates, select Clear All using the  
button and press the OK  
button.  
10.3 Manual Search  
You can search channels manually using the search parameters.  
1. Press the MENU button.  
2. Select Installation using the  
button and press the OK  
or button.  
3. Select Manual Search using the  
button and press the OK  
or button.  
1. Frequency  
1. Select Frequency using the  
button and press the OK  
button and press the OK  
or button.  
2. Select the frequency using the  
and button. Select User Define to enter the value directly.  
GB 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Installation  
2. Symbol Rate  
1. Select Symbol Rate using the  
button and press the OK  
button and press the OK  
or button.  
2. Select the symbol rate using the  
and button. Select User Define to enter the value directly.  
3. Network Search  
1. Select Network Search using the  
button and press the OK  
button and press the OK  
or button.  
2. Select Enable/Disable using the  
or button.  
GB 70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10.4 Search  
1. Select Search and press the OK  
button to activate channel  
search.  
2. Wait until channels search is completed. This may take a few  
minutes.  
3. The cursor is located at Stop during channel search. If you press  
the OK  
button while performing channel search, the  
operation will stop and only the channels found so far will be  
displayed. Reset the settings and activate channel search again if  
necessary.  
4. You can delete unnecessary channels from the searched  
channels. Select the channels to delete and press the OK  
button. Then select Delete and press the OK  
button. To  
delete all channels, select Select All to select all channels, select  
Delete and press the OK button.  
5. When completing channel search and deleting unnecessary channels, select Save and press the OK  
button  
to save the results.  
GB 71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Installation  
10.5 Default Setting  
Default setting restores the product to the default settings.  
Warning: Please note that once you perform default setting, all data such as channel list and user configured data  
are deleted, no information on the HDD will be lost.  
1. Press the MENU  
button.  
2. Select Installation using the  
button and press the OK  
or button.  
3. Enter the password using the NUMERIC(0-9) buttons.  
4. Select Default Setting using the  
button and press the OK  
button to restore all setting to  
or BACK button to return  
or button.  
5. Select Yes and press the OK  
factory default.  
Select No and press the OK  
to the previous menu.  
6. Confirm again to start loading default setting. Enter the password  
**  
using the NUMERIC(0-9) buttons to perform restoring.  
7. When completing the default setting, press the OK  
button to  
automatically run the installation wizard.  
For detailed information about the installation wizard, refer to  
Chapter 3. Installation Wizard.  
**  
Note: The default password is 0000. If you have forgotten the password, please contact your local product  
distributor.  
GB 72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. Software Update  
11. Software Update  
In order to maintain proper performance of the product, it is essential to have the most up-to-date software. Visit the  
Humax website to check the latest news and newly released software versions.  
http://www.humaxdigital.com.  
It is recommended that you periodically check for the availability of software update.  
11.1 OTA (Over the Air)  
OTA, an abbreviation of Over–the-Air, is a standard for the transmission of software through a broadcast system.  
The manufacturers reserve the right to decide when and where an update is made available. The new software version  
is then downloaded via cable. The software update via cable will only occur under the following circumstances.  
**  
1. The equipment should have appropriate loader software.  
Caution: Please note that if normal loader software is not equipped, the product may not be updated or  
operate properly after software update.  
**  
2. The manufacturer transmits the software via cable. The new version of the software is generally detected  
automatically.  
**  
Caution:  
•
Please be careful to keep the power on and the power cord plugged in during software update. If the power is off  
during software update, fatal damage may be caused to the product.  
•
Please be careful not to pull out the signal line (co-axial cable) during software update. Update may be interrupted  
and the product may not operate.  
**  
Note:  
•
Other functions will not activate while software update takes place.  
It may take 5 ~10 minutes to update software.  
•
•
Scheduling operation cannot work during software update.  
1. If new software is found when powering on  
1. A message will be displayed to notify that new software is found.  
2. Select Yes and press the OK  
button to update the software.  
3. Starts downloading new software. Please wait until the update is completed.  
4. When completing the software update, the equipment is automatically powered off and on again.  
GB 73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. Software Update  
11.2 Updating Software from Menu  
1. Press the MENU  
button.  
2. Select Installation using the  
button and press the OK  
or button.  
3. Enter the password using the NUMERIC(0-9) buttons.  
4. Select Software Update using the button and press the  
OK or button.  
Note: The default password is 0000. If you have forgotten the password, please contact your local product  
distributor.  
1. Automatic Update  
You can update software automatically.  
1. Select Automatic Update using the  
OK or button.  
2. Automatically search for new software. Select Cancel and press  
the OK button to finish search.  
button and press the  
3. When detecting software update, the following result is displayed.  
If new software is not found by automatic update, use manual  
update.  
4. Select Yes and press the OK  
Select No and press the OK  
menu without updating.  
button to start updating.  
button to return to the previous  
5. When completing the software update, the product is  
automatically powered off and on again.  
**  
GB 74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Manual Update  
You can perform manual update using know MUX information.  
1. Select Manual Update using the  
button and press the OK  
or button.  
2. Select Frequency using the  
button and press the OK  
button and  
or button. Select the frequency using the  
press the OK or button. Select User Define to enter the value  
directly.  
3. Select Symbol Rate using the  
button and press the OK  
button and  
or button. Select the frequency using the  
press the OK or button. Select User Define to enter the value  
directly.  
**  
4. Select Search and press the OK  
5. Existing new software will show. If new software does not exist,  
press the OK button to return to the manual update menu.  
6. Select Yes and press the OK button to start updating. Select  
No and press the OK button to return to the previous menu.  
button to search software.  
7. Performs software update. Please wait until it is completed.  
8. When completing the software update, the product is  
automatically powered off and on again.  
**  
GB 75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. Software Update  
3. Regular Auto Update and Search Time  
You can specify the regular auto update and search time. Regular auto update is started in standby mode.  
1. Select Regular Auto Update using the  
the OK or button.  
button and press  
2. Select Enable/Disable and press the OK  
button to set or  
unset the search time automatically.  
3. When selecting Enable, set Search Time using the  
NUMERIC(0-9) buttons and select OK and press the OK  
button.  
4. If you wish to cancel the entered time, select Cancel and press  
the OK  
button.  
**  
GB 76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11.3 Software Update from PC  
You can connect your product to the PC directly and update your software by transferring the new software from the PC.  
Follow these steps to download new software from PC to this product.  
**  
1. Download the new software file equivalent for this product model from our website(http://www.humaxdigital.com).  
2. Download and install the download tool from our website.  
3. Connect your PC to this product with an RS-232C serial cable.  
4. Execute the installed download tool and follow the instructions provided.  
5. Power On/Off to start operating.  
**  
GB 77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12. System  
12. System  
You can view all system information, signal detection and Conditional Access.  
1. Press the MENU  
button.  
2. Select System using the  
button and press the OK  
or  
button.  
12.1 Status  
You can view system information.  
Select Status using the  
button and press the OK  
or button.  
12.2 Signal Detection  
You can view the signal strength and signal quality of the channel that is currently on AV.  
Select Signal Detection using the  
button and press the OK  
or button.  
GB 78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12.3 Conditional Access  
You can view the current status of the Conditional Access.  
You can view the current status of the conditional access. Select  
Conditional Access using the  
button and press the OK  
or  
button.  
**  
1. Subscription Status  
2. Event Status  
5. Maturity Rating  
6. Messages  
3. Purse Balance  
4. Change CA PIN  
7. About Conax CA  
GB 79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13. Games  
13. Games  
Provides various games for user’s entertainment.  
1. Press the GAME  
button.  
2. According to the instruction displayed on screen, you can enjoy the game using the  
button.  
and OK  
**  
Note: Press the EXIT  
or BACK  
button to exit the game.  
GB 80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14. Menu Map  
14. Menu Map  
GB 81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15. Trouble Shooting  
15. Trouble Shooting  
15.1 Trouble Shooting  
Before contacting your local service centre, please read the tips below carefully. If the problem persists after completing  
the following procedure, please contact your local product distributor or service centre for further instructions.  
**  
1. No message displayed on the front panel. (The product will not switch on.)  
**  
•
•
•
•
Check the main power cable and make sure it is plugged into a suitable power outlet.  
Check that the mains supply is switched on.  
Check that the power switch is on at the rear of the product. (where applicable)  
Connect the power cable to a different power outlet.  
2. No picture on TV set  
**  
•
•
•
•
•
•
•
Make sure that the product is powered on and in operation mode. (Press the STANDBY button)  
Make sure that the AV cable is firmly connected to the TV.  
Make sure that the cable is properly connected to the product.  
Be sure to activate channel search.  
Check the brightness level of the TV.  
Check if the channel is currently on air. Contact the broadcaster to ensure that the channel is running.  
Press the SOURCE button if the product is in external input mode.  
3. No or poor sound  
**  
•
•
•
•
Check that your AV cable is connected correctly.  
Check the volume levels of your TV set and the product.  
Check if the product or TV is on mute.  
Check audio type or soundtrack option in the AV menu.  
4. Remote control does not operate.  
**  
•
To control the product, the top end of the remote control should point directly towards the receiving part of the  
product.  
•
•
Remove and reinsert the batteries in the remote control.  
Replace the batteries in the remote control for a new set.  
5. Cannot make reservations.  
**  
•
•
Check that no previous reservations are conflicting with the new reservation.  
Check that the product is switched on at the time of the reservation.  
6. No password information is given.  
**  
•
The default password is always 0000.  
7. Channel search does not work.  
**  
•
Check that your cable is connected correctly.  
GB 82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Cannot update new software.  
**  
•
You can get an update. If the product does not show a message requesting update, that means no software is  
available.  
9. Cannot watch scrambled channels.  
**  
•
Check that you have the appropriate Smartcard or CI-Module. Reinsert the Smartcard or CI-Module and make  
sure it initializes correctly.  
•
•
•
Check in the menu that the product is detecting the Smartcard or CI-Module.  
Check in the menu that you have a valid and working subscription to the channels you wish to view.  
Ensure that the Smartcard or CI-Module is not damaged.  
10.Cannot watch pay channels.  
**  
•
•
Check in the menu that you have a valid and working subscription to the channels you wish to view.  
Contact your network operator for more information.  
11.Cannot record progammes.  
**  
•
•
The hard disk is full. Delete unnecessary programmes and make space for new recording.  
Check if recording is overlapped with another channel. Stop the current recording or wait until the recording is  
finished.  
12.Cannot operate the TSR.  
**  
•
•
The TSR may not be available during the recording. Wait until the recording is finished.  
Delete unnecessary programmes and make space for new recording.  
13.The product makes a humming noise.  
**  
•
The noise is from the fan; the hard disk is operating normally. This kind of noise is inevitable but seldomly  
noticeable.  
14.Cannot playback.  
**  
•
To play back the recorded file of a scrambled channel, use the Smartcard. In case it has been a long time  
since you last recorded, this may not work. Contact the product distributor.  
The signal during the recording may be weak or the hard disk too full.  
•
15.Cannot change channel while recording.  
**  
•
Certain channels may not be changed due to restriction of the tuner type.  
GB 83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15. Trouble Shooting  
15.2 Error Message  
Error message Possible causes  
What to do  
No or bad signal  
The cable is not connected.  
Make sure the cable is connected correctly.  
Exchange the cable.  
The cable may be damaged or defective.  
The channel is not broadcasting.  
The channel is  
scrambled or not  
available.  
The channel has signal, but no video.  
Confirm if the channel is currently on air.  
The channel is deleted by the broadcasting  
company.  
The channel is for data broadcasting.  
The channel has signal, but no audio.  
The audio is not  
available.  
Press the SOUNDTRACK button to confirm if  
the channel has audio.  
No access  
No subscription to this channel.  
No authorization.  
Make sure you are subscribed to the channel.  
If the product has been turned off for a long  
time (standby or power off), please wait for  
authorization. It may take up to 60 minutes.  
No card inserted. Smartcard is not inserted.  
Insert Smartcard.  
Incorrect card  
Wrong Smartcard is inserted.  
Smartcard is not inserted correctly.  
Smartcard is broken.  
Insert appropriate Smartcard.  
Pull out the Smartcard and reinsert it.  
Replace the Smartcard.  
GB 84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16. Specification  
16. Specification  
Tuner & Channel  
Input Connector  
Frequency Range  
Input Impedance  
Signal Level  
IEC 169-2 female  
47MHz to 862MHz  
75  
-13 to +15dBmV  
Demodulation  
QAM  
Input Symbol Rate  
Constellation  
1.5-7Ms/s  
16-QAM, 32-QAM, 64-QAM, 128-QAM, 256-QAM  
MPEG Transport Stream A/V Decoding  
Transport Stream  
Profile Level  
MPEG-2 ISO/IEC 13818  
MPEG2 MP@ML  
Input Rate  
15 Mbit/s Max  
Aspect Ratio  
4:3, 16:9  
Video Resolution  
Audio Decoding  
Audio Mode  
720x576, 720x480  
MPEG/MusiCam Layer I & II  
Single /Dual mono/ Stereo /Joint stereo  
A/V & Data In/Out  
Video  
RCA/TV SCART/VCR SCART Video Output (CVBS, S-Video, RGB)  
RCA/TV SCART/VCR SCART Volume and Mute Control  
(Resolution:20bits DAC, MAX. 2Vrms)  
Audio L/R  
RS-232C  
9 PIN Male Socket  
S/PDIF  
Digital Audio Output, Fiber-Optic (Resolution: 20bits)  
USB 2.0 Device (connectable to the USB of PC)  
USB  
Power Supply  
Input Voltage  
Type  
90-250V a.c., 50/60Hz  
Switching Mode Power Supply (SMPS)  
Operation - Max 23W  
Power Consumption  
Standby - Max 14W  
Protection  
Separate internal fuse & Lightning protection  
Physical Specification  
Size  
380 mm*78 mm*281 mm  
3.7kg  
Weight (Net)  
Operating Temperature  
Storage Temperature  
0
to +45  
-10 to +70  
GB 85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17. Glossary  
17. Glossary  
1. Coaxial cable  
A specially designed and shields cable that can transport signals with high frequency  
**  
2. Frequency  
The property of a signal measured in cycles per second (=Hz).  
**  
3. FTA (Free- To-Air)  
An unscrambled broadcast allowing customers to view channels or services without paying any subscription.  
**  
4. HDD (Hard Disk Drive)  
The primary computer storage medium, which is made of one or more aluminum or glass platters, coated with a  
ferromagnetic material  
**  
5. MUX  
The transmitter/frequency/channel where the programme provider/operator transmit a package of digital  
channels/services. Usually there are several MUX frequencies with different or same content.  
**  
6. Network  
The collection of channels/services that a programme provider/operator offer. These services may be transmitted  
from one or several MUXes. In the transmitted data stream the operator may transmit a service information  
table(network information) that informs the product about all available services in the network.  
**  
7. OSD (On Screen Display)  
OSD displays the basic information necessary for the users to configure monitor or TV settings. OSD information  
may include brightness, contrast, tuning, RGB adjustment, and screen size and position  
**  
8. OTA (Over The Air)  
A standard for the transmission of software for equipment, through a broadcast system. Manufacturers reserve  
the right for deciding the release of the software for their products.  
**  
9. PIP (Picture In Picture)  
A function that allows you to display 2 different TV channels (or TV inputs) on one screen.  
**  
10.PVR (Personal Video Recorder)  
Video recorder that can record and play back programmes directly using the embedded hard disk drive(s).  
**  
11.RF (Radio Frequency)  
Television signals are modulated onto RF signals and are then demodulated by your television's or STB’s tuner.  
**  
12.SCART  
A 21-pin connector standard to connect two pieces of Audio-Visual equipment such as a TV and a VCR. Each  
device will have a 21-pin female connection; a cable with male connection at both ends is used for connecting the  
devices.  
**  
13.S/PDIF (Sony/Philips Digital Interface format)  
A standard format for the transfer of digital audio signals. It allows the transfer of digital audio between two  
devices without any conversion to and from analogue, which could degrade the signal quality.  
**  
14.Trick-Play  
Pause, Fast Forward/Fast Rewind, Slow Motion, Instant Replay, Instant Skip, Repeat A-B  
**  
15.TSR (Time Shifted Recording)  
A function that record the present programme temporarily to support trick-play  
GB 86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18. Service and Support  
18. Service and Support  
Information concerning troubleshooting, software upgrade and product support is provided in the following websites and  
call centers.  
Should your product require warranty service, please contact HUMAX to obtain the appropriate authorization.  
**  
Deutschland  
Tel:  
01805-778870 (€ 0,14/Min)  
Mo-So 8:00-23:00 Uhr  
Öffnungszeiten:  
E-mail:  
support@humax-digital.de  
www.humax-digital.de  
Website:  
Sprache:  
Deutsch/Englisch/Türkisch  
**  
UK  
Tel:  
0870 247 8800  
Opening Hours:  
E-mail:  
Mon-Fri 8:30-21:00  
uksupport@humax-digital.co.uk  
www.humax-digital.co.uk  
English  
Website:  
Language:  
**  
Australia  
Tel:  
1800 613 011  
Opening Hours:  
E-mail:  
Mon- Fri 9:00-17:30  
techinfoau@humaxdigital.com  
www.humaxdigital.com/australia  
English  
Website:  
Language:  
**  
Italia  
Tel:  
899 100 080 (€1+ VAT/min)  
Lun.-Ven. 8:00-18:00  
Italiano  
Orario:  
Lingua:  
GB 87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18. Service and Support  
Sverige  
Tfn:  
+46 (0)550 85527  
Mån-fre 08:00-16:30  
Svenska/engelska  
Öppettider:  
Språk:  
**  
Suomi  
Puh:  
09 56186366  
Aukioloajat:  
Kieli:  
ma-pe 8:00-16:00  
suomi/englanti  
**  
Austria  
Tel:  
0820 400675 (€0,14/min)  
Mon-Sun 8:00-23:00  
Opening Hours:  
E-mail:  
support@humax-digital.de  
www.humax-digital.de  
Deutsch/English/Turkish  
Website:  
Language:  
**  
Note: For hardware repair, please visit our website.  
GB 88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Baby Accessories PD261467A User Manual
Graco Baby Carrier Baby Einstein ISPS037AB 11 05 User Manual
Harbor Freight Tools Stove 43343 User Manual
Havis Shields Fan GSM30023 User Manual
Hearth and Home Technologies Stove CB1200I B User Manual
Hoshizaki Ice Maker KMS 750MLH User Manual
HP Hewlett Packard Personal Computer BL465C G7 User Manual
IBM Computer Drive 22P7028 User Manual
iHome MP3 Docking Station iP37 User Manual
Image Home Gym IMBE19500 User Manual