Humax DVD Player DV 1000T User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Notice  
**  
Read this manual carefully and make sure you understand the provided instructions. For your safety,  
know what the reaction upon each action will be.  
**  
Warnings, Cautions and Notes  
Throughout the whole manual, pay special attention to the following marks that indicate hazardous  
situations.  
**  
•
•
•
Warning  
**  
Indicates a hazardous situation which, if not avoided, could result in (serious) injury.  
**  
Caution  
**  
Indicates a situation which, if not avoided, could damage the equipment or other apparatus.  
**  
Note  
**  
Indicates additional information to the user to make the user aware of possible problems and  
information of any importance to help the user to understand, to use and to maintain the  
installation.  
**  
To reduce the risk of electric shock, do not remove cover (or back). No  
user serviceable parts inside. Refer servicing to qualified service  
personnel.  
This symbol indicates dangerous voltage inside the product that  
presents a risk of electric shock or personal injury.  
**  
**  
This symbol indicates important instructions accompanying the product.  
**  
**  
**  
**  
GB 2  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
Only for DVD player  
1. CAUTION  
**  
**  
Use of controls or adjustments or performance of procedures  
other than those specified herein may result in hazardous  
radiation exposure.  
The DVD player is classified as a CLASS 1 LASER product.The  
CLASS 1 LASER PRODUCT label is located on the exterior.  
2. Supported disc formats  
**  
The following discs can be used in your DVD.  
Note: Supported discs could be different with the following disc.  
•
•
•
•
•
•
DVD Video (Digital Versatile Disc)  
Super Video CD  
Video CD  
**  
**  
Super Audio CD (Only plays the CD layer of a hybrid SACD disc)  
Audio CD  
MP3  
**  
**  
**  
**  
GB 3  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Notice  
**  
3. Region code of the DVD player and DVDs  
Since DVD films are not normally released in all parts of the  
world at the same time, all DVD players have a specific regional  
code. Discs can be given an optional regional code. If the  
regional codes differ between the player and the disc, playback is  
not possible.  
DVDs must be marked ALL for all regions or specific number for specific region to work in this  
machine. If the DVD is marked with a different region, it cannot be played in this DVD player.  
Some DVD discs may not have a regional code label even though their playback is prohibited by  
area limits.  
Region 2  
Europe  
Europe, Japan, Middle East, Egypt, South Africa, Greenland  
European Region 2 DVDs may be sub-coded D1 through D4. D1 identifies a UK-only  
release. D2 a identify European DVDs that are not sold in the UK and Ireland. D4  
identifies DVDs that are distributed throughout Europe.  
**  
**  
**  
**  
**  
**  
GB 4  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Safety and Warning  
**  
This digital terrestrial receiver has been manufactured to satisfy international safety standards.  
Please read the following safety precautions carefully.  
**  
Safety Instructions and Precautions  
**  
1. MAINS SUPPLY  
**  
90 - 250V AC 50/60Hz  
Operate your product only from the type of power source indicated on the marking label. If you  
are not sure of the type of power supplied to your home, consult local power company.  
Disconnect the receiver from the mains before you start any maintenance or installation  
procedure  
**  
2. OVERLOADING  
**  
Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or  
shock.  
**  
3. LIQUIDS  
**  
The receiver should not be exposed to any liquids such as dripping or splashing. In addition,  
no objects filled with liquids, such as vase, shall be placed on the apparatus.  
**  
4. CLEANING  
**  
Disconnect the receiver from the wall outlet before cleaning.  
Use a light damp cloth (no solvents) to dust the receiver.  
**  
**  
**  
5. VENTILATION  
**  
The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. Do  
not stand the receiver on soft furnishings or carpets. Do not stack electronic equipments on  
top of the receiver.  
**  
6. ATTACHMENTS  
**  
Do not use any unsupported attachments as these may be hazardous or cause damage the  
receiver.  
**  
7. CONNECTION TO THE AERIAL  
**  
Disconnect the receiver from the mains before connecting or disconnecting the cable from the  
aerial. Failure to do so can damage the aerial.  
**  
8. CONNECTION TO THE TV  
**  
Disconnect the receiver from the mains before connecting or disconnecting the cable from the  
aerial. Failure to do so can damage the TV.  
**  
9. EARTHING  
**  
The aerial cable must be buried in the ground.  
The buried cable of the system must comply with SABS 061.  
**  
**  
**  
**  
**  
GB 5  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Safety and Warning  
**  
10.LOCATION  
**  
Place the receiver indoors to avoid exposing it to lightening, rain or sun.  
Do not place it near a radiator or heat register.  
Make sure it has more than 10 cm clearance from any appliances susceptible to  
electromagnetic influences, such as TV and VCR.  
Do not block these openings with any object, and do not place the product on a bed, sofa, rug,  
or other similar surface.  
If you place the product on a rack or bookcase, ensure that there is adequate ventilation and  
that you have followed the manufacturer's instructions for mounting.  
Do not place the product on an unstable cart, stand, tripod, bracket, or table where it can fall.  
A falling product can cause serious injury to a child or adult, and serious damage to the  
appliance.  
**  
11.LIGHTNING, STORM, or NOT IN USE  
**  
Unplug the product from the wall outlet and disconnect the aerial during a lightning storm or  
when left unattended and unused for long periods of time. This will prevent damage to the unit  
due to lightning and power-line surges.  
**  
12.EXTRANEOUS OBJECTS  
**  
Do not insert anything through the openings in the unit, where they can touch dangerous  
voltage point or damage parts.  
**  
13.REPLACEMENT of PARTS  
**  
When the replacement parts are required, be sure the service technician uses replacement  
parts specified by the manufacturer or those that have the same characteristics as the original  
**  
**  
part. Unauthorised substitutions may result in additional damage to the unit.  
**  
**  
Warning  
**  
1. Follow these directions in order not to damage the power cord or plug.  
Do not modify or process the power cord or plug arbitrarily.  
Do not bend or twist the power cord too much.  
Make sure to disconnect the power cord with the plug held.  
Keep heating appliances as far as possible from the power cord in order to prevent the cover  
vinyl from melting.  
2. Follow these directions. Failure to follow one of them may cause electrical shock.  
Do not open the main body.  
Do not insert metals or inflammable objects inside the product.  
Do not touch the power plug with a wet hand.  
Disconnect the power cord in case of lightening.  
3. Do not use the product when it is out of order. If you continue to use the product when  
defective, serious damage can be caused toit. Make sure to contact your local product  
distributor if the product is out of order.  
4. Please do not insert metal or alien substance into the slots for the modules and smart cards.  
In doing so can cause damage to the STB and reduce its life span.  
**  
**  
**  
**  
GB 6  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
Only for DVD player  
1. Cleaning discs  
Some malfunctions (frozen or distorted and broken sound for example) are due to dirt on the disc. To  
avoid such problems you should clean your discs regularly.  
Dirty discs should be cleaned with a soft cloth. Always wipe  
from the middle to the edge.  
Note: Do not use any solvents such as benzine, thinner, alcohol , commercially  
available cleaning agents or antistatic sprays designed for analogue records.  
2. Handling discs  
Do not touch the playback side of disc.  
**  
**  
Hold the disc by the edges so that fingerprints will not get on the surface.  
3. Storing discs  
After playing, store the disc in its case.  
Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to  
direct sunlight, as there may be a considerable temperature increase inside the car.  
**  
**  
**  
**  
GB 7  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Contents  
**  
STB  
1. Before Using the Receiver  
GB12  
**  
1.1 Package Contents  
1.2 Front Panel  
GB12  
GB13  
GB14  
GB15  
1.3 Rear Panel  
1.4 Remote Control  
2. Setup  
GB19  
**  
2.1 Connecting the Antenna for STB  
2.2 Connecting for DVD player  
2.3 Powering On  
GB19  
GB22  
GB24  
3. Loading  
3.1 Booting Mode  
3.2 Installation Wizard  
4. Basic Operation  
GB25  
**  
GB25  
GB25  
GB26  
**  
4.1 Switching Channel  
GB26  
GB26  
GB26  
GB27  
GB27  
GB28  
GB30  
4.2 Volume Control  
**  
**  
4.3 Text and Interactive Services  
4.4 Change the Subtitle Language  
4.5 Change a Audio Language  
4.6 Program Information (I- plate)  
4.7 Option List  
5. Channel List  
GB32  
**  
5.1 Displaying and Switching Channel List  
5.2 Changing Channel List Group  
5.3 Edit Channels  
GB32  
GB33  
GB34  
GB36  
GB39  
5.4 Edit Favourite Channels  
5.5 Channel Change Mode  
6. Program Guide  
GB40  
**  
6.1 Viewing Programme Guide Information  
6.2 Finding a Programme  
GB40  
GB42  
GB43  
6.3 Viewing Reserved Programme  
**  
**  
**  
**  
GB 8  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
7. Setting Preferences  
7.1 Parental Control  
GB48  
**  
GB45  
GB45  
GB47  
GB48  
GB49  
GB50  
GB53  
7.2 Language Setting  
7.3 Time Setting  
7.4 Schedule  
7.5 A/V Control  
7.6 UHF Tunning  
7.7 Miscellaneous Settings  
8. Installation  
GB54  
**  
8.1 Automatic Search  
8.2 Manual Search  
8.3 Default Setting  
GB54  
GB55  
GB56  
9. Software Update  
GB57  
**  
9.1 OTA (Over the Air)  
GB57  
GB60  
9.2 Software Update from PC  
10. System Information  
GB61  
**  
**  
**  
10.1 Status  
GB61  
GB61  
10.2 Signal Detection  
11. Games  
GB62  
**  
12. Manipulating Your TV Using Remote Control  
GB63  
**  
**  
**  
**  
**  
GB 9  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Contents  
**  
DVD Player  
1. Getting Started  
GB73  
**  
2. Playing a DVD-VIDEO Disc  
GB74  
**  
2.1 Playing a title  
2.2 General Information  
2.3 Search  
GB75  
GB75  
GB76  
GB77  
GB77  
GB78  
GB78  
GB79  
GB79  
GB79  
GB80  
GB80  
GB80  
2.4 Skipping Chapter  
2.5 Repeat Mode  
2.6 Repeat a section of disc  
2.7 Fast Playing  
2.8 Slow Motion  
2.9 Zooming in and out  
2.10 Subtitle/Audio  
2.11 Listening Mode  
2.12 Time display  
2.13 Angle  
**  
**  
3. Playing a Audio CD  
GB81  
**  
3.1 Playing Audio CD  
3.2 Detail Information  
3.3 Playlist Menu  
3.4 Search  
GB81  
GB81  
GB83  
GB83  
GB84  
GB85  
GB85  
GB86  
GB86  
GB86  
GB87  
3.5 Listening Mode  
3.6 Time Display  
3.7 Fast Playing  
3.8 Play Mode  
3.9 Repeat Mode  
3.10 Playlist Editor  
3.11 MP3 Disc Scan  
4. Settings (DVD part)  
GB88  
**  
4.1 Language  
4.2 Audio  
GB88  
GB89  
GB90  
GB92  
GB92  
4.3 Display  
4.4 Disc  
4.5 Parental Control  
**  
**  
**  
**  
GB 10  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
Appendix1. Menu Map  
GB94  
**  
Appendix2. Trouble Shooting  
Appendix3. Specification  
Appendix4. Glossary  
GB96  
**  
GB98  
**  
GB100  
**  
Appendix5. Service and Support  
GB102  
**  
**  
**  
**  
**  
**  
**  
GB 11  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
1.Before Using the Receiver  
**  
This chapter describes detail instructions on the product and its accessories.  
1.1 Package Contents  
Please check all package contents before using your receiver.  
**  
**  
**  
**  
Remote Control (1)  
User's Manual (1)  
Scart Cable (1)  
Batteries (2)  
**  
Note: Since faults may occur if the remote control is being left without a battery for a long time,  
always keep the battery inserted in the remote control.  
**  
**  
**  
**  
GB 12  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1.2 Front Panel  
**  
1. STANDBY Button  
**  
Switches between Operation and Standby modes.  
**  
2. DVD/DTV  
**  
Change mode between DTV and DVD.  
**  
3. TV/RADIO  
**  
**  
**  
Switches between TV and Radio modes.  
**  
4. CH - / CH +  
**  
Adjust the audio volume.  
**  
5. Stop  
**  
Stop play a disc.  
**  
6. Play / Pause  
**  
Start playback/Pause playback.  
**  
7. Skip previous  
**  
Return to the beginning of the current chapter/track or skip back to the previous chapter/track.  
**  
8. Skip next  
**  
Skip to the next chapter/track.  
**  
9. OPEN/CLOSE  
**  
Open and close the disc tray.  
**  
**  
**  
**  
GB 13  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
1. Before Using the Receiver  
**  
1.3 Rear Panel  
**  
1. ANTENNA IN  
**  
Connects a antenna to a antenna cable.  
**  
2. TV/VCR  
**  
Connects a RF signal from your receiver to RF(ANT) input jack on your TV or VCR.  
**  
3. RS-232C  
**  
Connects to your PC to upgrade product's software programme.  
**  
4. S-Video  
**  
**  
**  
Connect your receiver to a TV or VCR that accepts S-Video input.  
**  
5. COMPONENT SELECT  
**  
RGB  
If you select RGB, you can connect to video, audio L and R.  
YPbPr  
If you select YPbPr, you can connect your receiver to a TV or VCR that accepts  
high-quality video input.  
6. TV SCART  
**  
Connects a TV SCART cable.  
**  
7. VCR SCART  
**  
Connects a VCR SCART cable.  
**  
8. VIDEO  
**  
Connects to your TV or VCR and output Video signals.  
**  
9. AUDIO L/R  
**  
Connects to your TV or VCR and output Audio signals.  
**  
10.S/PDIF  
**  
Outputs the digital audio signals(S/PDIF).  
**  
**  
**  
**  
GB 14  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1.4 Remote Control  
STB RCU  
**  
**  
Note: This remote control can also control your TV. To set the remote control for your TV,  
please refer to Chapter 12.  
**  
**  
**  
**  
GB 15  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
1. Before Using the Receiver  
**  
STB  
1. TV  
14.DVD/DTV  
**  
**  
Turn on the TV.  
Change mode between DTV and DVD.  
**  
**  
2. STB  
15.STANDBY  
**  
**  
Turn on the STB.  
Switches between Operation and  
**  
Standby modes.  
**  
3. TV/RADIO  
**  
16.MUTE  
Switches between TV and Radio  
**  
modes.  
Pauses the audio temporarily. That is,  
**  
volumes on/off temporarily.  
**  
4. WIDE  
**  
17.SOURCE / AUX  
Set the Display Format.  
**  
**  
Selects the input source between TV  
and receiver./Controls input mode of  
5. NUMERICAL BUTTONS  
**  
TV.  
Enters a TV/Radio channel number or  
**  
menu option number.  
**  
18.TEXT  
**  
6. LIST  
Displays digital text.  
**  
**  
Displays the channel list in DTV.  
**  
19.GUIDE  
**  
7. COLOR BUTTONS  
Displays the Programme Guide.  
**  
**  
Select color keys for interactive  
20.OK  
applications.  
**  
**  
**  
**  
Selects a menu, or confirms the  
selected operation. And displays the  
channel list during watching a  
8. MENU  
**  
Displays the main menu in DTV.  
**  
programme.  
**  
9. ARROW BUTTONS  
**  
21.EXIT  
Changes the channel or move the  
cursor to the up, down, left or right  
**  
Exits the main menu or Guide screen.  
**  
menu option.  
**  
22.i (INFORMATION)  
**  
10.BACK  
Displays the information about the  
**  
channel and programme.  
Returns to the previous menu and  
**  
screen.  
**  
23.CH - / + or PAGE - / +  
**  
11.V - / +  
Changes the Channel or Page.  
**  
**  
Adjusts the audio volume of TV.  
**  
24.SUBTITLE  
**  
12.SOUNDTRACK  
Changes the subtitle language.  
**  
**  
Displays the Soundtrack.  
**  
25.DVD FUNCTION BUTTONS  
13.OPT + (OPTION)  
**  
Note:  
Displays the channel attributes during  
•
This part explains STB function only.  
watching a programme.  
**  
•
Press the G  
button to display the  
game.  
**  
**  
**  
**  
GB 16  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
DVD RCU  
**  
**  
**  
**  
**  
**  
GB 17  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
1. Before Using the Receiver  
**  
DVD  
1. DVD/DTV  
14.TIME  
**  
**  
Change mode between DTV and  
Change time display.  
**  
DVD.  
**  
15.PLAY CONTROL BUTTONS  
**  
2. DISC MENU  
(PLAY / PAUSE)  
**  
Displays the main disc menu.  
Start playback/Pause playback.  
**  
**  
(STOP)  
Stop play a disc.  
3. MENU  
**  
**  
Displays the setup menu in DVD.  
**  
(SKIP PREVIOUS/ZOOM -)  
Return to the beginning of the current  
chapter or track or skip back to the  
previous chapter or track./zoom  
4. ARROW BUTTONS  
**  
Changes the channel or move the  
cursor to the up, down, left or right  
down.  
menu option.  
**  
**  
(SKIP NEXT/ZOOM + )  
Skip to the next chapter or  
5. BACK  
**  
track./zoom up.  
Returns to the previous menu and  
**  
screen.  
(Fast Backward/Slow  
Backward)  
Fast backward a disc/execute a  
backward slow playback when  
**  
6. SOUNDTRACK  
**  
Displays the Soundtrack.  
**  
playing a DVD.  
**  
7. OPT+ (OPTION)  
**  
**  
**  
(Fast Forward/Slow  
Backward)  
Set the listening mode.  
**  
Fast forward a disc/execute a  
forward slow playback when playing  
8. SEARCH  
**  
Change the search mode.  
a DVD.  
**  
**  
9. CLEAR  
**  
16.DVD FUNCTION BUTTONS  
**  
Delete the track or bookmark in DVD.  
**  
A
B
Repeat between A and B in DVD.  
10.OK  
**  
**  
ZOOM / PROGRAMME  
Enlarge the picture during DVD  
Selects a menu, or confirms the  
selected operation.  
**  
playback. / Edit playlist.  
**  
11.EXIT  
TITLE  
**  
Exits the main menu or Guide  
Displays the title menu.  
**  
screen.  
MARKER  
**  
Set bookmark in a DVD during  
12.i (INFORMATION)  
**  
playback.  
**  
Displays the DISC information.  
**  
REPEAT MODE  
13.SUBTITLE  
Change repeat mode.  
**  
**  
Changes the subtitle language in  
ANGLE / PLAY MODE  
DVD.  
Change angle and play mode.  
**  
Note: This part explains DVD function only.  
**  
**  
**  
**  
GB 18  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
2. Setup  
**  
This chapter describes how to set up the receiver. Select the most appropriate procedure depending  
on your requirements.  
Note: If you encounter any problem when setting up the receiver, please contact your local  
product distributor.  
2.1 Connecting the Antenna for STB  
1. Connecting TV and VCR with SCART  
Connect the cable of your TV aerial to the ANTENNA IN connector on the rear of the receiver.  
SCART and co-axial cable are connected as in the figure above.  
**  
**  
**  
**  
**  
**  
**  
GB 19  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
2. Setup  
**  
2. Connecting Hi-Fi system 1  
Connect the outputs on this receiver to corresponding inputs on your Hi-Fi Audio or Dolby Prologic  
Decoder.  
( left audio out to left audio in, right audio out to right audio in)  
**  
**  
**  
**  
**  
**  
**  
GB 20  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
3. Connecting Hi-Fi system 2  
If you wish to connect the optical S/PDIF terminal and Dolby digital decoder to listen Dolby digital  
audio, DTS audio or Multi Surround audio, connect as follows:  
**  
**  
**  
**  
**  
**  
**  
GB 21  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
2. Setup  
**  
2.2 Connecting for DVD player  
1. Connection with Component Video (Y Pb Pr ) cable  
This method of transmitting pictures produces the highest quality as the video signal is split into its  
Y(brightness), U and V (red minus brightness, blue minus brightness)components. Insert one end of  
a component video (Y Pb Pr ) cable into the red/blue/green cinch socket at the back of the DVD  
player and the other end into the component video input sockets on the TV set.  
**  
**  
**  
**  
Note: the socket and connector color on the DVD player must match the color of the sockets  
on the TV set(Red-Red, Blue-Blue, Green-Green). If this is not the case, the colors on  
the screen may be distorted or the picture may not be visible.  
**  
**  
**  
**  
GB 22  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2. Connection with S-Video cable  
**  
First, you set the SCART Output as S-Video in the chapter 7.5.  
For the highest video quality, connect to your TV using the S-Video socket.  
1. Connect the S-Video connector on the rear of the player to the corresponding connector on  
the TV using the S-Video cable.  
2. Connect the audio left and right channel sockets on the player rear panel to the corresponding  
sockets on your TV or Stereo system.  
**  
**  
**  
**  
**  
**  
**  
GB 23  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
2. Setup  
**  
2.3 Powering On  
1. Connect the power cord of the receiver to a wall outlet.  
2. Turn on the power button, located at the left on the back of  
the receiver.  
Make sure that the Standby LED indicator is turned on  
Red.  
3. Power on by pressing the STANDBY  
Remote Controller or the STANDBY  
of the receiver.  
button at  
button at the front  
**  
**  
**  
**  
**  
**  
**  
GB 24  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
3. Loading  
**  
3.1 Booting Mode  
When powering on your receiver for the first time, the mode selection will automatically appear.  
Select DTV or DVD using the or DVD/DTV and press  
the OK button.  
Please wait for booting the DTV or DVD.  
Note:  
If you don’t select a specific mode, then the previous mode will  
be automatically selected.  
3.2 Installation Wizard  
When using the DTV mode for the first time, a Channel Search will be performed automatically. (You  
can run the Installation Wizard in Default Setting.)  
1.Search  
**  
**  
1. During operating search, the cursor is located at Stop.  
Therefore, if you press the OK  
button during searching,  
the operation is stopped and the channels found so far will  
be displayed.  
2. Even after the search operation is complete, and no or not  
all channels are found, press the OK  
button and try to  
reset the search operation again if necessary.  
3. You can delete any unwanted channels from the list of  
found channels. Select your desired channels to delete  
and press the OK  
button. Then select Delete and  
press the OK  
button. To delete all channels, select  
Select All to select all channels, select Delete, and press  
the OK button.  
4. After completing the Channel Search and deleting unwanted channels, select Save to save  
the changes. When completing Channel Search, you can enjoy digital television.  
Warning :  
If you exit the Install Wizard without fully completing the channel searching  
procedures, you may not watch any broadcasting normally. In this case, you  
can use the Installation Menu to configure your receiver as you like  
**  
**  
**  
**  
GB 25  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Basic Operation  
**  
This chapter describes functions such as switching channel, volume control, and basic features for  
watching programmes.  
4.1 Switching Channel  
You can switch the current channel using one of the following methods.  
1. Press the CH-/CH+  
button.  
2. Enter your desired channel numeric using the NUMERICAL (0-9) buttons to move to the  
channel directly.  
3. Press the TV/RADIO  
button to switch between TV channel and Radio channel.  
Note: You can switch channel using Programme Guide or Channel List. Please refer to  
Chapter 5 and 6 for more information.  
4.2 Volume Control  
1. Press the V-/V+  
2. Press the MUTE  
buttons to adjust the audio volume of your TV.  
button to stop the sound of your TV temporarily.  
Note: The mute function keeps enabled while you change the channel.  
**  
**  
This function is only for TV. Refer to chapter 12 to set the TV.  
4.3 Text and interactive services  
If your chosen channel has teletext (MHEG) features , you can access them. Teletext services often  
load automatically shortly after the Digital Teletext window is displayed. In which case, simply follow  
the given instructions(press color buttons).  
1. Press TEXT  
button to access teletext(MHEG) features.  
2. Press TEXT  
button again to return to normal viewing.  
3. Press the CH-/CH+  
button to exit this service.  
Note: You should select OFF from the subtitle language to display teletext(MHEG).  
**  
**  
**  
**  
GB 26  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Basic Operation  
**  
4.4 Change the Subtitle Language  
If the current programme provides Subtitle information, you can select the language for the Subtitle.  
1. Press the SUBTITLE  
button to display the subtitle  
language list.  
2. Select your desired subtitle language using the  
button, and press the OK  
button. Then the subtitle will  
be displayed in the selected language at the bottom of the  
screen.  
3. Select OFF from the subtitle language list if you do not  
wish subtitles to be displayed on the screen.  
Note: You can select a default subtitle language by selecting MENU - Preferences - Language  
Setting - Subtitle Language.  
4.5 Change a Audio Language  
If the current programme is available in multiple audio languages, you can select the language that  
you wish to listen in.  
**  
**  
1. Press the SOUNDTRACK  
button to display  
soundtrack list.  
2. Select your desired audio language using the  
to change Audio immediately.  
button  
3. Select Audio Direction(left, right, stereo) using the  
button.  
4. Press the EXIT  
or SOUNDTRACK  
button to exit  
the soundtrack list.  
Note: you can select your desired default audio language by selecting MENU - Preferences -  
Language Setting -Audio Language.  
**  
**  
**  
**  
GB 27  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Basic Operation  
**  
4.6 Programme Information (I- plate)  
Programme information is always displayed for a specific period of time whenever you switch  
channels. You can view the programme information by pressing the i button while watching a  
programme. Press the EXIT  
button to hide the I-plate.  
1. General Information  
General Information is displayed as follows on the screen.  
**  
**  
**  
1. Channel number and channel name  
2. Programme name  
3. Icons  
Displayed only if this programme is reserved.  
Represents parental level. It indicates the minimum level of ages that the programme  
is targeted at.  
Displayed only when the channel is a locked channel.  
Displayed only when the channel is a scrambled channel.  
Displayed only when subtitle information is available.  
Displayed only when there is any teletext information.  
Displayed only when the programme is a dolby digital one.  
Displayed when the channel supports MHEG.  
Displayed when the channel supports data channel.  
**  
**  
**  
**  
GB 28  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
4. Current time  
5. Detail programme information: displayed if detailed programme information is provided.  
6. Channel looping mode and Channel List Name : if you select Within the current channel list  
by selecting MENU - Edit channels - Channel Change Mode , the Icon of Channel looping  
mode is displayed. And channel list, which you selected, is displayed.  
7. Programme broadcasting time and progress bar: displays programme playing time and  
progress bar.  
8. Next programme Information : displayed if next programme information is provided. Press the  
button to display the next programme information.  
Note: If there is no available programme information, programme information is not displayed.  
2. Detail Programme Information  
You can see detailed information about the current programme.  
Press the i  
button where I-plate is displayed to view detailed  
information.  
Note:  
•
Press the i button again to hide the information box.  
•
If the Detail information is more than one page, use  
button to move to the previous or next page.  
**  
**  
**  
**  
**  
**  
GB 29  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Basic Operation  
**  
4.7 Option List  
You can view and confirm detailed information about the current channel and change the information  
in necessary.  
Note: Press the OPT+  
button when the channel list is displayed to view Option List. Then the  
following functions in the option list are performed to the current channel where cursor is  
located.  
1. Add a channel to favourite group  
You can add current channels to the favourite group immediately. Also, you can add a channel to  
multiple Favourite groups.  
1. Press the OPT+  
button.  
**  
2. Select Favourite using the  
or OK button.  
button, and press the  
button and press  
**  
3. Select favourite group using the  
the OK  
button to register for Favourite Group.  
**  
4. Press the OK  
button again on the selected Favourite  
**  
**  
Group to release the registered channel.  
**  
**  
5. Move to the parent menu using the button to save the  
changes automatically.  
**  
Note: For detailed information about how to change Favourite Group's name and how to register  
Favourite Channel for the whole channels, refer to Chapter 5.  
**  
**  
**  
**  
GB 30  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2. Lock/Unlock a Channel  
You can lock or unlock the current channel while watching a programme.  
1. Press the OPT+ button.  
**  
2. Select Lock using the  
button, and press the or OK  
button.  
**  
3. Select Lock option using the  
button, and press the  
OK  
button.  
**  
4. Select Unlock option using the  
OK button.  
button, and press the  
**  
**  
5. You will be prompted to enter your Password. Enter your  
password to unlock the channel.  
**  
6. Move to the parent menu using the button to save the  
changes automatically.  
**  
**  
**  
Note: When switching to the Locked Channel, you must enter the password to watch a  
programme.  
3. Delete a Channel  
You can delete the current channel while watching a programme.  
1. Press the OPT+  
button.  
**  
2. Select Delete using the  
button, and press the OK  
or button.  
**  
3. Select Yes in the confirmation message and press the OK  
button.  
**  
**  
4. Enter password using the NUMERICAL (0-9) button to  
delete the current channel.  
**  
**  
**  
**  
GB 31  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
5. Channel List  
**  
3 types of channel lists are provided for easy and quick channel finding.  
TV  
The list of all TV channels with 2 subgroups: one is sorted by channel number, the  
other is sorted by channel name.  
Radio  
Favourite  
The list of all Radio channels with 2 subgroups: one is sorted by channel number, the  
other is sorted by channel name.  
The list of the favourite channels with 5 subgroups that you can organise channels by  
your private taste.  
5.1 Displaying and Switching Channel List  
You can display channel list using LIST  
button and switch into other channel on the channel list.  
1. Press the LIST  
button while watching a programme to  
display the channel list.  
2. Select your desired channel using the  
button and  
press the OK  
button to change the channel.  
3. Enter the channel numeric directly using NUMERICAL  
(0-9) button to move cursor into your desired channel. And  
then press the OK  
button to change into the selected  
channel.  
**  
**  
4. Select On by going to MENU - Preferences -  
Miscellaneous Settings - Option in CH List to display  
scramble icon in the channel list.  
Select OFF by going to MENU - Preferences -  
Miscellaneous Settings - Optoin in CH List to display  
only channel list without scramble icon.  
**  
Note:  
•
If there are multiple channels, press the PAGE-/PAGE+  
Whenever you press the TV/RADIO button while the channel list is displayed, the channel  
list will be switched between TV and Radio channel list.  
button to move by channel.  
•
**  
**  
**  
**  
GB 32  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
5.2 Changing Channel List Group  
You can select channel list by group.  
1. Press the button while the channel list is displayed to  
view the group list.  
**  
**  
2. Select your desired channel group using the  
button  
to display its sub-groups.  
**  
**  
3. Press the OK  
or button, select your desired  
sub-group using the  
button, and then press the OK  
**  
button.  
**  
4. The channel list for the selected sub-group is displayed.  
**  
**  
Note:  
•
The sub-group of Favourite channel list may exist or not depending on your configuration.  
•
If Within the Current Channel List option is selected from MENU - Edit channels - Channel  
Change Mode menu, you can only change programme within the selected channel list using  
the P-/P+  
while your watching a programme.  
**  
**  
**  
**  
GB 33  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
5. Channel List  
**  
5.3 Edit Channels  
You can edit all channels or each channel by channel list group.  
1. Press the MENU button.  
2. Select Edit Channels using the  
the OK or button.  
3. Select Edit Channel lists using the  
press the OK or button.  
button, and press  
button, and  
4. You will be prompted to enter your password. Enter your  
password using NUMERICAL (0-9) button.  
Note:  
•
Press the BACK  
the MENU or EXIT  
or button to save the changes and return to the previous menu, press  
button to exit the menu screen.  
•
You can easily navigate all menus using the assigned numeric for each menu. Press the  
MENU - 2 - 1 in order at remote control to select Edit Channel Lists menu.  
1. Select a Channel Group  
**  
**  
You can select the channel list group to edit. TV or Radio, and the subgroups from the channel  
search for aerial and scramble channel lists are included as channel list groups.  
1. Press the OK  
or button in group to display Channel  
List Group.  
2. Select your desired Channel List Group using the  
button, and press the OK  
button.  
Note:  
•
Press the TV/RADIO  
button to move to TV or RADIO channel list directly.  
•
For editing Favourite channel list, move to MENU - Edit Channels - Edit Favourite  
Channels menu.  
**  
**  
**  
**  
GB 34  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2. Delete Channels  
You can delete one or more channels.  
1. Move the cursor to the channel list using the  
button.  
2. Select your desired channel, and then press the OK  
button to delete the channel(s). You can select multiple  
channels.  
3. Select Delete in the right using the button, and press the  
OK  
button.  
3. Lock/Unlock Channels  
You can lock or unlock one or more channels.  
1. Move the cursor to the channel list using the  
button.  
2. Select your desired channel, and then press the OK  
button to lock/unlock the channel(s). You can select  
multiple channels.  
3. Select Lock in the right using the button, and press the  
**  
**  
OK  
button.  
Note:  
•
Only if locked channel(s) is selected or all channels are locked, Lock is switched into Unlock.  
When you press Unlock, locked channel is switched into unlocked channel.  
•
Enter password using the NUMERICAL (0-9) button to watch locked channel.  
4. Select/Unselect All Channels  
You can select/unselect all channels at a time.  
1. Select Select All in the right and press the OK  
button to select all channels.  
2. Select Unselect All in the right and press the OK  
button to unselect all the selected  
channels.  
**  
**  
**  
**  
GB 35  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
5. Channel List  
**  
5.4 Edit Favourite Channels  
You can edit Favourite channel or Favourite channel list.  
1. Press the MENU button.  
2. Select Edit Channels using the  
the OK button.  
3. Select Edit Favourite Channels using the  
button, and press  
button,  
and press the OK  
or button.  
Note:  
•
Press the BACK  
the MENU  
or button to save the changes and return to the previous menu. Press  
or EXIT button to exit the Menu screen.  
•
You can easily navigate all menu items using the assigned NUMERICAL (0-9) button for each  
menu. Press the MENU - 2 - 2 in order on the remote controller to select the Edit Favourite  
Channels menu.  
**  
The buttons for editing the Favourite channel list are described in the following table.  
**  
**  
**  
**  
Add  
Adds Favourite channel.  
**  
**  
Remove  
Removes from the Favourite channel.  
**  
**  
TV/RADIO  
Switches between TV and Radio channel list.  
**  
**  
Fav.Group  
Changes Favourite channel list group.  
**  
**  
Move  
Moves the order of channel list within the Favourite channel list.  
**  
**  
Rename  
Renames the name of Favourite channel list.  
**  
**  
Sort  
Sorts channels by number or name in all TV/Radio channel list.  
**  
**  
Unselect All  
Unselect all the selected channel.  
**  
**  
**  
**  
GB 36  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
1. Add/Remove favourite channels  
You can add favourite channel(s) to a specific Favourite channel list or remove the added favourite  
channel(s) from the list.  
1. Select Favourite Group using  
.
2. Select your desired channel(s) in all TV/Radio channel list, and press  
channel(s).  
to add Favourite  
3. Select your desired channel(s) in Favourite channel list, and press  
channel(s).  
to remove Favourite  
Note: You can switch between TV and Radio channel list using TV/RADIO  
button at remote  
control or  
.
2. Move favourite channels  
You can move favourite channel to your desired location within the Favourite channel list.  
This function is only changing the location without changing the channel number  
1. Select Favourite Group using  
.
2. Select your desired channel to move within the Favourite channel list and press the OK  
button.  
**  
**  
3. Select  
, and press the OK  
button.  
4. Move the cursor to your desired location using the  
button, and press the OK  
button.  
5. The selected channel(s) is moved to the desired location you selected.  
3. Rename a favourite channel list  
You can rename Favourite channel list.  
1. Select Favourite group to rename using  
.
2. Select , and press the OK button.  
3. Enter the Favourite channel list name using the keyboard displayed on the screen.  
4. When finishing entering the favourite channel list name, select OK, and press the OK  
button.  
**  
**  
**  
**  
GB 37  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
5. Channel List  
**  
4. Additional Features  
Additional Features provides many useful functions which are necessary to add Favourite Channel.  
**  
Change between TV and Radio channel list  
You can add not only TV channel(s) but also Radio channel(s) to Favourite channel list. Press  
switch all channel list into TV or Radio channels.  
to  
Note: You can also change into TV or Radio channel by pressing TV/RADIO  
button at remote  
controller.  
**  
Select a favourite channel list  
You can select your desired Favourite channel list to edit. Press  
to display the Favourite channel list. Then select your desired  
channel list using the  
button, and press the OK  
button.  
**  
**  
**  
Sort a channel list  
You can sort all TV or Radio channel lists by channel number or name for easy Favourite channel  
searching. If channel lists are sorted by channel number, is displayed. When you press this  
button, all the channel lists are sorted by name. Or, if channel lists are sorted by channel name,  
is switched into  
. Press this button to order channels by number.  
**  
Unselect all the selected channels  
Press  
button to unselect all the selected channel.  
**  
**  
**  
**  
GB 38  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
5.5 Channel Change Mode  
You can change the channel either in the group or in the entire groups while watching a programme.  
1. Press the MENU button.  
2. Select Channel Change Mode using the  
and press the OK or button.  
3. Select All Channels or within the current channel list  
using the button, and press the OK button.  
button,  
Note: When Within the current channel list is selected, you can only change the channel  
within the current channel list using the CH- /CH+  
buttons.  
**  
**  
**  
**  
**  
**  
GB 39  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
6. Programme Guide  
**  
The Programme Guide displays programme information about each channel, based on the date and  
time. You can also schedule your recording using the information given.  
Note: Press the GUIDE  
button to exit the Guide screen.  
**  
6.1 Viewing Programme Guide Information  
You can view programme information for all channels.  
1. Press the GUIDE  
2. Move to previous or next programme within the same  
channel using the button.  
button.  
3. Move to another desired channel using the  
button. If  
there are multiple channels, use PAGE-/PAGE+  
button to move to channels by page. Also, you can enter  
your desired channel number using the NUMERICAL (0-9)  
button on the remote controller to move to the channel  
directly.  
4. Select your desired programme, and press the OK  
button. Then you can watch the programme if it is on air, or  
you can reserve it if it is the following programme.  
**  
**  
5. Press the i  
button in the selected programme to view  
Extended Information for the selected programme.  
**  
1. Viewing Guide Information by Groups  
You can view programme information for desired channel list by groups.  
1. Press the GUIDE  
button.  
2. Press the REDbutton to display the channel list group.  
3. Select your desired channel list group using the  
button to display the appropriate sub-group.  
4. Move the cursor to the sub-group using the button, select  
your desired sub-group using the  
press the OK button.  
button, and then  
5. The Programme Guide for selected channel list is  
displayed.  
**  
**  
**  
**  
GB 40  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2. Viewing Programme Information Using Time Bar  
You can quickly search for your desired time zone using the Time bar.  
1. Press the GUIDE  
2. Press the GREEN button to display Time Bar.  
3. Select the Time Bar button using the button, and  
button to move as your desired amount  
button.  
press the OK  
of time. If you press the button repeatedly, the same  
operation is repeated.  
4. Each button functions as follows.  
Now  
Moves to the current programme where the cursor is located.  
Moves to the previous programme or 30 minutes before.  
Moves to the next programme or 30 minutes after.  
Moves to 2 hours before.  
Moves to 2 hours after.  
Day  
Day  
Moves to one day before.  
Moves to one day after.  
**  
**  
5. Select  
button and press the OK  
button to exit the Time Bar.  
Note: Guide provides programme information from the previous day to the next 7 days.  
3. Reserving (Reserving a Watching)  
You can automatically reserve your desired programme by selecting the scheduled programme and  
pressing the OK  
button.  
1. Select the desired programme and press the OK  
button. The following message will be displayed.  
2. Select Yes and press the OK  
button to reserve the  
programme. When a reservation has been completed, the  
icon is displayed on the reserved programme.  
3. Select No and press the OK  
button not to reserve the  
programme.  
4. If the channel is locked, parental controlled or restricted by  
watching time, you will be prompted to enter your  
Password. Enter your Password to complete the  
reservation.  
**  
**  
**  
**  
GB 41  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
6. Programme Guide  
**  
6.2 Finding a Programme  
You can find your desired programme by programme name or genre easily.  
1. Press the GUIDE button.  
2. Press the BLUEbutton to display Find screen.  
3. Enter the programme name directly using the keyboard  
displayed on the screen.  
4. When completing entering programme name, select the  
Find button, and press the OK  
button.  
5. Select By Genre and press the OK  
button to search  
programme by genre.  
Note:  
•
Select  
button and then press OK  
button to enter the programme name on the  
keyboard screen.  
•
If you select Previous or Next on the Keyboard displayed on the screen and press OK  
button, the keyboard layout is switched.  
7. Select your desired genre and press the OK  
button.  
**  
**  
**  
8. If you select your desired programme from the Found  
Programme List screen and press the OK  
button, you  
can watch the programme if it is on air, or you can reserve  
your recording if it is the future programme. If you want to  
find other programme, you might press the BLUE button to  
display keyboard screen.  
**  
Note: The Found Programme List may differ depending on the provided programme information.  
**  
**  
**  
**  
GB 42  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
6.3 Viewing Reserved Programme  
You can add or edit reserved programmes by viewing the reserved programme list.  
1. Press the GUIDE  
button.  
**  
2. Press the YELLOW button to display the Schedule  
screen.  
**  
3. Select the scheduled programme and press the OK  
button to edit the reservation information.  
**  
4. Select vacant list and press the OK  
button to add a  
**  
new reservation schedule.  
**  
**  
**  
1. Editing a Reserved Programme  
1. Change the reserved Start Time using the  
button and  
button and  
the NUMERICAL (0-9) buttons.  
2. Change the reserved End Time using the  
the NUMERICAL (0-9) buttons.  
3. Change the Repeat mode using the  
button. The  
options are Once, Daily, and Weekly.  
4. Select the Delete using the  
button and press the OK  
button and press the OK  
button and press the OK  
button to delete the reserved programme.  
5. Select the Cancel using the  
button to cancel the editing.  
6. Select the Save using the  
button to complete the editing.  
**  
**  
**  
**  
GB 43  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
6. Programme Guide  
**  
2. Adding a Reservation  
1. Enter your desired channel number using the  
NUMERICAL (0-9) button. The channel name is  
automatically displayed by channel number.  
2. Enter your desired Start Time using the  
button and  
the NUMERICAL (0-9) button.  
3. Enter your desired End Time using the  
button and the  
NUMERICAL (0-9) button.  
4. Select one of repeat mode options among Once, Daily, and Weekly using the  
button.  
5. Select the Save button and press the OK  
6. Select the Cancel button and press the OK  
button to complete entering.  
button to cancel the reservation.  
**  
Note:  
•
You can reserve up to 20 programmes.  
If you desired programme is already reserved, adjust the reservation appropriately.  
•
•
IIf the channel is locked or restricted by watching time, you will be prompted to enter your  
Password to complete the reservation.  
**  
**  
**  
**  
**  
**  
GB 44  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
7. Setting Preferences  
**  
You can set censorship, watching time, and all other items suitable for your environment.  
Note:  
•
•
Press the BACK  
the MENU or EXIT  
or button to save the changes and return to the previous menu. Press  
button to exit the Menu screen.  
You can easily select any item from the menu using the NUMERICAL (0-9) buttons.  
**  
7.1 Parental Control  
You can set parental control for each programme and watching time. You can also change your  
Password.  
1. Press the MENU  
2. Select the Preferences using the  
the OK or button.  
3. Select the Parental Control using the  
press the OK or button.  
button.  
button, and press  
button, and  
4. When prompting message is displayed to ask Password,  
enter the Password using the NUMERICAL (0-9) button.  
**  
**  
**  
1. Setting Censorship  
Censorship Classification allows you to block programmes according to the age level you have  
set.  
1. Select the Censorship Classification using the  
button, and press the OK  
or  
button.  
2. Select your desired Age level using the  
button, and press the OK button.  
View All  
All programmes can be watched because there is no age limitation.  
Programmes are blocked for children under the age of 7.  
Programmes are blocked for children under the age of 12.  
Programmes are blocked for children under the age of 15.  
Programmes are blocked for children under the age of 18.  
Programmes are blocked without considering the age level.  
7
12  
15  
18  
Lock All  
Note: You have to enter Password to watch the programme which is blocked by the age level.  
**  
**  
**  
**  
GB 45  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
7. Setting Preferences  
**  
2. Setting Allow Watch Time  
You can block programmes according to the watching time for all the channels.  
1. Select the Allow Time Control using the button,  
and press the or OK button.  
2. Select Enable or Disable the Allow Time Control using  
the button, and press the or OK button.  
**  
Disable You can watch whenever you want regardless of  
Allow Time.  
Enable You can watch only while the time specified by  
Allow Time.  
3. When you have selected Enable, set the Start and End  
Time using the NUMERICAL (0-9) buttons, and press the  
OK  
4. If you wish to cancel the entered time, select the Cancel  
button, and press the OK button.  
button.  
Note: Once the setting has been completed, you can watch programme only while the time  
specified by Allow Time. Or you should enter the Password to watch any programme during  
unspecified time.  
**  
**  
3. Change Password  
You can change the existing Password into new one.  
1. Select Change Password using the  
press the OK or button.  
2. Enter New Password using the NUMERICAL(0~9) button,  
and select OK and press OK button.  
3. Enter the New Password again to confirm the Verify  
button, and  
Password, and select OK and press the OK  
button.  
Note: The Default Password is 0000. If you have forgotten your Password, please contact  
your local product distributor.  
**  
**  
**  
**  
GB 46  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
7.2 Language Setting  
You can set Language for Menu, Audio, and Subtitle.  
1. Press the MENU button.  
2. Selec Preferences using the  
OK or button.  
3. Select Language Setting using the  
press the OK or button.  
button, and press the  
button, and  
1. Audio/Subtitle Language  
You can set the language for Audio and Subtitle. Default language is English.  
1. Select Audio/Subtitle Language using the button.  
2. Press the or OK button to display the available Language List.  
3. Select your desired language using the  
button, and press the OK  
button.  
**  
**  
2. Audio Priority  
You can select the priority of audio.  
1. Select Audio Priority using the  
2. Press the OK or button to display the Language or Dolby Digital.  
3. Select your desired option and press the OK button.  
button.  
**  
Auto  
Subtitles are displayed automatically in the predefined subtitle language.  
Manual  
Subtitles are displayed in the language when you select the subtitle language by  
pressing the Subtitle  
button at remote control.  
3. Subtitle Display  
You can select whether or not to display the Subtitle if provided.  
1. Select Subtitle Display using the button.  
2. Press the OK or button.  
**  
Auto  
Subtitles are displayed automatically in the predefined subtitle language.  
Manual  
Subtitles are displayed in the language when you select the subtitle language by  
pressing the Subtitle  
button at remote control.  
**  
**  
**  
**  
GB 47  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
7. Setting Preferences  
**  
3. Subtitle Font  
**  
You can select the Subtitle font.  
1. Select Subtitle Font using the  
button.  
2. Press the or OK  
button to display the Variable or Fixed option.  
button.  
3. Select your desired option and press the OK  
**  
Variable  
Fixed  
Uses the horizontally variable Subtitle Font.  
Uses the fixed Subtitle Font.  
7.3 Time Setting  
You can specify the current time and Power On/Off time.  
1. Press the MENU button.  
2. Select Preferences using the  
OK or button.  
3. Select Time Setting using the  
OK or button.  
button, and press the  
button, and press the  
**  
**  
1.Setting Current Time  
You can set the GMT Offset for current time.  
1. Select GMT Offset using the button.  
2. Press the OK  
or button to display GMT list. GMT is changed by from 30 minutes to 1  
hour.  
3. Select your GMT offset using the  
buttons, and press the OK  
button.  
Note:  
•
The current time is set automatically whenever GMT Offset changes.  
•
The default item is Auto. If GMT Offset is Auto, it is automatically set depending on your  
country.  
**  
**  
**  
**  
GB 48  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2. Power On  
You can set the time when the product is automatically powered on.  
1. Select Power On using the button,  
2. Select either Enable or Disable the Power On using the  
OK  
or button.  
**  
Enable  
Disable  
Uses the Power On and sets the Power on  
time.  
Not uses the Power On.  
3. 3When you have selected Enable, enter the Channel No and Time using the  
NUMERICAL(0~9) buttons, and select OK and press the OK  
button.  
3. Power Off  
You can set the time when the product is automatically powered off.  
1. Select Power Off using the button,  
2. Select either Enable or Disable the Power Off using the  
button, and press the OK  
button.  
**  
**  
**  
Enable  
Disable  
Uses the Power Off and sets the Power Off time.  
Not uses the Power Off.  
3. When you have selected Enable enter the Time using the NUMERICAL(0~9) buttons, and  
select OK or button.  
Note: Once Power On/Off is specified, it is repeated everyday.  
7.4 Schedule  
You can reserve a programme to watch programme at your desired time.  
1. Press the MENU  
2. Select Preferences using the  
press the OK or button.  
3. Select Schedule using the  
the OK or button.  
button.  
button, and  
button, and press  
4. Reserved Pregoramme List is displayed on the  
screen. To edit the existing reservation, select your  
desired reservation, and press the OK  
add a new reservation, select a blank list and press  
the OK button.  
button. To  
Note: For detailed information about Schedule, refer to Chapter 6.3.  
**  
**  
**  
**  
GB 49  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
7. Setting Preferences  
**  
7.5 A/V Control  
You can set Audio or Video Output Control.  
1. Press the MENU  
2. Select Preferences using the  
OK or button.  
3. Select AV Control using the  
OK or button.  
button.  
button, and press the  
button, and press the  
1. TV-SCART/VCR-SCART  
You can set TV/VCR-SCART Output.  
1. SelectTV-SCART using the  
button, and press the OK  
CVBS/S-Video using the  
or button.  
2. Select one option among  
button  
button, and press the OK  
2. VCR-SCART  
**  
**  
You can set VCR SCART Output.  
1. Select VCR-SCART using the  
button.  
2. Select one option among  
CVBS/S-Video using the OK  
or button.  
3. Audio Output  
Set the Audio Output.  
1. Select Audio Output using the  
button.  
2. Select one option  
Stereo or Mono using the OK  
or button.  
4. Screen Ratio  
You can set the aspect ratio of your TV.  
1. Select Screen Ratio using the  
button.  
2. Select one option  
4:3 or 16:9 using the OK  
or button.  
**  
**  
**  
**  
GB 50  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
5. Display Format  
You can select the Display Format according to TV Screen Ratio.  
1. Select Display Format button, and press the OK  
or button.  
2. If the Screen Ratio is set to 4:3, you can select one from 16:9 Letterbox/14:9  
Letterbox/Centre Cutout using the button, and press the OK button.  
3. If the screen ratio is set to 16:9, this item will display Disable or Auto.  
6. Dynamic Range  
This function adjusts audio output of SCART, RCA, and RF cable with DOLBY DIGITAL.  
When listening at a low volume, Dynamic Range reduces the volume of loud sounds such as  
explosions, etc, and increases the volume of quiet sounds such as whispered dialog.  
1. SelectDynamic Range using the  
button, and press the OK  
or button.  
2. Select one option among  
Maximum/Standard/Minimum using the  
button, and  
press the OK  
button  
Maximum  
Standard  
No compression of Dolby Digital sound.  
Light compression of Dolby Digital sound. Set this when listening at low volume  
in night. If you connect to a TV with a RCA socket, we will recommend Standard  
for user.  
**  
**  
Minimum  
Heavy compression of Dolby Digital sound. Set this when listening the TV by  
connecting by RF cable. If you connect to a TV with a RF socket, we will  
recommend Minimum for user.  
7. Downmix Mode  
You can set the downmix mode  
1. Select Downmix Mode using the  
button, and press the OK or  
button.  
2. You can select one option from Dolby Surround or Stereo Normal.  
**  
**  
**  
**  
GB 51  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
7. Setting Preferences  
**  
7.6 UHF Tuning  
You can set the UHF Tuning channel.  
1. Press the MENU  
2. Select Preferences using the  
OK or button.  
3. Select UHF Tuning using the  
OK or button.  
button.  
button, and press the  
button, and press the  
1. UHF Channel  
You can select UHF Channels for the TV. The Channel range and Frequency change according to  
PAL Standard.  
1. Select UHF Channel using the  
button, and press the OK  
or button.  
2. Select channel range based on the following channel criteria using the  
button, and press  
the OK  
button.  
**  
**  
**  
CH21-CH69  
CH28-CH69  
PAL I/G for Europe  
PAL B for Europe/Australia  
2. PAL  
You can select the channel range and frequency table.  
1. Select PAL using the button, and press the OK  
or button.  
button, and press the OK  
2. Select one option among PAL I/PAL G/PAL B using the  
button.  
3. UHF Offset  
You can adjust fine tuning setting.  
1. Select UHF Offset using the  
button, and press the OK  
or button.  
2. Select a range between -4~+4 using the  
button, and press the OK  
button.  
**  
**  
**  
**  
GB 52  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
7.7 Miscellaneous Settings  
1. Press the MENU  
2. Select Preferences using the  
OK or button.  
3. Select Miscellaneous Settings using the  
button.  
button, and press the  
button,  
and press the OK  
or button.  
1. i-Plate Display Time  
You can set the duration during which the Information box is to be displayed when you switch the  
channel.  
1. Select i-Plate Display Time using the  
button, and press the OK  
or button.  
2. Select a value between 1~20 seconds using the  
button, and press the OK  
button.  
Note: When it is set to Disable, the i-Plate will not be displayed when you switch the channel.  
2. OSD Transparency  
**  
**  
You can set the transparency of On Screen Display.  
1. Select OSD Transparency using the  
button, and press the OK  
or button.  
2. Select one option among Disable/25/50/75 using the  
button, and press the OK  
button.  
**  
Disable  
25, 50, 75  
Fully opaque screen  
As the number is bigger, the screen is more transparent.  
3. Option in CH List  
You can set the option of scrambled icon in the Option in CH List.  
1. Select the Option in CH List using the  
button, and press the OK  
or button.  
button.  
2. Select one option from On/Off using the  
button, and press the OK  
**  
On  
Off  
Scramble icon display in the channel list.  
Scramble icon disappear in the channel list.  
**  
**  
**  
**  
GB 53  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Installation  
**  
8.1 Automatic Search  
If your receiver is connected to the aerial and television, you can automatically search channels  
without entering any other information.  
1. Select MENU  
2. Select Installation using the  
OK or button.  
3. Select Automatic Search from Installation menu using the  
button, and press the OK or button.  
button.  
button, and press the  
**  
Search  
Wait while the receiver searches for the channels, this may take a few minutes.  
1. During operating search, the cursor is located at Stop  
Therefore, if you press the OK  
button during  
searching, the operation is stopped and the channels  
found until then will be displayed.  
**  
**  
2. If search operation is successfully completed, and the  
channel does not exist, press the OK  
button and try to  
reset the search operation again if necessary.  
3. You can delete unnecessary channels from the searched  
channels. Select your desired channels to delete and press  
**  
the OK  
button. Then select Delete and press the OK  
button. To delete all channels, select Select All to  
select all channels, select Delete, and press the OK  
button.  
4. When completing Channel Search and deleting  
unnecessary channels, select Save to save the changes.  
**  
**  
**  
**  
GB 54  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
8.2 Manual Search  
You can search channels manually by searching parameters, if you know the MUX information.  
1. Select MENU button.  
2. Select Installation using the  
OK or button.  
3. Select Manual Search from Installation menu using the  
button, and press the OK or button.  
4. Select Channel, Frequency, Mode, Guard Interval or  
button, and press the  
Network Search using the  
button, and press the OK  
or button.  
**  
1. Channel Number  
Enter your desired frequency channel to search. When entering frequency channel value, the  
appropriate frequency value is entered.  
Select one of channel using the  
button, press the OK  
button.  
**  
**  
2. Frequency  
Enter the your desired frequency to search directly. When entering frequency, the appropriate  
channel for the entered frequency is automatically displayed on Channel.  
Enter frequency using the NUMERICAL(0~9) button and press OK  
button.  
3. Mode  
Required for Channel Search. If you don't know the value, please select Auto.  
Select among Auto, 2k and 8k using the  
button, and press the OK  
button.  
4. Guard Interval  
Required for Channel Search. If you don't know the value, please select Auto.  
Select one option among Auto, 1/4,1/8,1/16 and 1/32 using the  
button, and press the OK  
button.  
**  
**  
**  
**  
GB 55  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
8. Installation  
**  
5. Network Search  
If specified frequency channel information and other channel information are provided together, the  
channel, which belongs to other frequency channel, is also searched.  
Select one option between Enable and Disable using the  
button.  
Note: You can search after the setting of Manual Search. Refer to 8.1 Automatic Search.  
8.3 Default Setting  
Default Setting restores the receiver to the default settings.  
Warning: Please note that once you perform Default Setting, all data such as Channel List, and  
User Configured data are deleted.  
To perform Factory Default:  
1. Press the MENU  
2. Select Installation using the  
OK or button.  
3. Enter Password using the NUMERICAL (0-9) button.  
button.  
button, and press the  
4. Select Default Setting using the  
OK or button.  
button, press the  
**  
**  
5. Select Yes and press the OK  
setting to Factory Default.  
button to restore all  
Select No and press the OK  
or BACK  
button to  
return to the previous menu.  
6. Confirm again to start loading default setting. Enter Password using the NUMERICAL (0-9)  
button to perform restoring.  
7. When completing the default setting, press the OK  
button to automatically run the  
Installation Wizard.  
When default setting is completed, Installation Wizard is automatically displayed, which helps  
Channel Search. For detailed information about Installation Wizard, refer to 3. Installation  
Wizard.  
**  
**  
**  
**  
GB 56  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
9. Software Update  
**  
In order to maintain proper performance of this product, it is essential to have the most up to date  
software. The latest news and release of software versions may be found at Humax website -  
http://www.humaxdigital.com.  
It is recommended that you periodically check for the availability of software upgrade.  
Warning :  
You can search after the setting of Manual Search. Refer to 8.1 Automatic  
Search.  
9.1 OTA (Over the Air)  
OTA, an abbreviation of Over-the-Air, means that downloads the software where the manufacturer  
reserves the right to decide when and where to release through aerial.  
Over the Air(OTA) is simply another alternative for downloading software versions. However, the  
manufacturer reserves the right to decide when and where this software update can take place by  
beaming latest software versions over the air via aerial. The software update via aerial will only  
occur under the following circumstances.  
1. The equipment should have appropriate loader software.  
Caution: Please note that if you don't have normal loader software, the equipment may not  
be updated or work after software update.  
2. The manufacturer decides to release software downloading via a designated aerial  
3. The equipment must be "tuned" properly to the same aerial that the manufacturer uses.  
**  
**  
4. Update software when the quality of receiving signal strength is high. If the weather is not so  
good that the quality of receiving signal strength is not recommendable, perform the software  
upgrade later.  
**  
Caution:  
•
Please be careful to keep the power on and the power cord plugged in during software update.  
If the power is off during software update, it may cause fatal damage to the product.  
•
Please be careful not to pull out the Signal line (co-axial Cable) during software update.  
Update may be interrupted and the product may not work.  
**  
Note:  
•
The product cannot work at all during software update.  
It may take 5 ~10 minutes to update software.  
•
•
Scheduling operation cannot work during software update.  
**  
**  
**  
**  
GB 57  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
9. Software Update  
**  
**  
1. If new software is found when powering on  
1. A message will be displayed to notify that new software is  
found.  
2. Select Yes and press the OK  
button to update the  
software.  
3. Starts downloading new software. Please wait until the  
updated is completed.  
4. When completing the software update, the equipment is  
automatically powered off and on again.  
2. If updating software from Menu  
1. Press the MENU  
2. Select Installation using the  
OK or button.  
3. Enter Password using the NUMERICAL (0-9) buttons.  
4. Select Software Update using the button, and press  
the OK or button.  
button.  
button, and press the  
**  
**  
3. Automatic Update  
You can set the product to find HUMAX software update site and update software automatically.  
1. Select Automatic Update using the button, and  
or button. Automatically search for new  
press the OK  
software.  
2. When detecting update software, the following result is  
displayed. If new software is not found by Automatic, use  
Manual Update.  
3. Select Yes and press the OK  
Select No and press the OK  
Select Later and press the OK  
button to start updating.  
button to return to the previous menu without updating.  
button to update later. That means the update menu  
display as soon as you turn on the receiver next time.  
4. When completing the software update, the product is automatically powered off and on again.  
**  
**  
**  
**  
GB 58  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
4. Manual Update  
You can perform Manual Update only if you know MUX information of software update correctly.  
Among the Software Update Sites of HUMAX, the software search operation is performed only for  
the satellites that have been set to Enable in Installation - Antenna Setting - Satellite Alternative  
menu and that have all other Antenna Setting correct.  
1. Select Manual Update from Software Update screen  
using the  
**  
button, and press the OK  
or button.  
Select the channel number which provides update  
software. You can also enter the frequency instead of  
channel number in which updated software is provided.  
2. Select Mode. If the information is not known, then Auto  
can be selected.  
3. Select Mode. If the information is not known, then Auto  
**  
can be selected.  
4. Select Guard Interval. If the information is not known, then  
Auto can be selected.  
Note: How to setting parameters in Manual Update is  
the same as how to set parameters in Manual  
Search. Refer to Manual Search.  
**  
**  
5. Select Search and Press the OK  
button to search  
software.  
6. It is displayed whether or not New Software exist.  
If new software does not exist, press the OK  
return to the Manual Update Menu.  
button to  
7. Select Yes and press the OK  
Select NO and press the OK  
previous menu.  
button to start updating.  
button to return to the  
Select Later and press the OK  
button to update later.  
That means the update menu display as soon as you turn  
on the receiver next time.  
8. Performs Software Update. Please wait until it is  
completed.  
9. When completing the software update, the product is  
automatically powered off and on again.  
**  
**  
**  
**  
GB 59  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
9. Software Update  
**  
5 Software Auto-Detecting and Time  
You can specify the software detecting time.  
If the receiver powers on during software auto-detecting, Detecting will stop.  
1. Select Software Auto-Detecting from Software Update screen using the  
button.  
2. Select Enable or Disable using OK  
or button whether or not setting the software  
detecting time automatically.  
3. When you select Enable, you can set the detecting time in the Auto-Detecting Time.  
9.2 S/W Update from PC  
You can connect your receiver to the PC directly and update your software by transferring the new  
software from the PC. Follow these steps to download new software from PC to this product.  
1. Download new software file (HDF files) equivalent for this product model from our website into  
your computer(http://www.humaxdigital.com).  
2. Download and install download tool file from our website into your computer.  
3. Connect your PC to this product with RS-232C serial cable.  
4. Execute installed download tool, and then follow the instructions contained the download tool.  
5. Press the STANDBY  
button to make this product operating.  
**  
**  
**  
**  
**  
**  
**  
GB 60  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
10. System Information  
**  
You can view all system information, signal strength and quality.  
1. Press the MENU  
button.  
2. Select System using the  
button, and press the OK  
or button.  
10.1 Status  
You can view System information  
1. Select Status using the  
button, and press the OK  
or button.  
2. Confirm the information about Hardware version,  
Software version, Loader version, System ID, and  
Update Date  
**  
**  
10.2 Signal Detection  
You can view the signal strength and signal quality receiving for the channel that is currently on AV.  
1. Select Signal Detection using the  
the OK or button.  
button, and press  
2. Displays the channel name, frequency, mode, and guard  
interval of terrestrial frequency, and currently tuned  
channel number and its name, which current channel  
belongs to and the graphs and percentage of Signal  
Strength and Quality of the channel.  
**  
**  
**  
**  
GB 61  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
11. Games  
**  
This product provides various games for user's entertainment.  
1. Press the MENU  
2. Select Games using the  
3. According to the instruction displayed on screen, you can enjoy the game using  
and OK button.  
button.  
button, and press the OK  
or button.  
Note: Press the EXIT  
Press the GAME  
or BACK  
button to exit the game.  
button to start directly.  
**  
**  
**  
**  
**  
**  
GB 62  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
12. Manipulating your TV using Remote Control  
**  
You can manipulate TV using the remote control provided by Humax.  
Note: This function may not be supported depending on TV model.  
TV code setting  
Note: While you are setting TV code, please keep pressing TV button.  
1. Point remote control towards the remote control receiving parts of TV.  
2. Press the TV  
button, and the TV button LED blinks once.  
Keep pressing TV button for 3 seconds, then TV button LED turn on.  
Press three numbers of TV code using the NUMERICAL (0~9) button orderly.  
Refer to the following Code for TV manufacturer.  
3. TV button LED blink twice when you detach your finger from the TV button.  
4. TV power turns on or off when the setting is completed.  
**  
[Code for TV manufacturer] Table  
Brand  
Code  
Brand  
Code  
A MARK  
ABEX  
002  
ARCAM  
062,063  
016  
ARCHER  
ASUKA  
002  
ACTION  
ACURA  
110,124  
064,071  
**  
**  
004  
ATLANTIC  
AUDINAC  
AUDIOSONIC  
AUDIOVOX  
AUMARK  
AUTOVOX  
BARCO  
098  
ADMIRAL  
ADYSON  
AIKO  
030,042,076,099,123  
016,063  
081  
018,071  
029  
002,029,052,084  
AKAI  
015,099,109,124  
064,071  
026  
AKURA  
068,076,097  
ALARON  
ALBA  
051,055,062  
004,017,018,064,123  
118  
086  
BASIC LINE  
BAUR  
004,064  
ALLORGAN  
AMBASSADOR  
AMPLIVISION  
AMSTRAD  
ANAM  
018,087,097,099,102,108  
049  
BAYSONIC  
BEAUMARK  
BEC  
052  
063  
050  
004,018,047,049,145  
003,004,052  
099,110,124  
040,099,108,109,110  
009  
BECRESE  
BELCOR  
ANAM NATIONAL 024  
ANITECH  
ANITECH  
ANSONIC  
AOC  
004,071  
BELL & HOWELL 006,038,106  
071  
BEON  
018  
063  
040  
127  
BINATONE  
BLACKSTRIPE  
002,009,015,056  
**  
**  
**  
**  
GB 63  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
12. Manipulating your TV using Remote Control  
**  
Brand  
Code  
106  
Brand  
Code  
BLACKSTRIPE  
BLACKSTRIPE  
BLAUPUNKT  
BLUE SKY  
BLUE STAR  
BOOTS  
CIE  
133  
108  
CIMLINE  
CINERAL  
CITIZEN  
004,117  
029,084  
059,060,061  
064  
015,019,025,026,029,040,  
057,074  
075  
CLAIRTONE  
CLARIVOX  
CLARIVOX  
CLATRONIC  
CLATRONIC  
CME  
1056  
018  
125  
098  
127  
063  
BOSCH-BAUER  
BPL  
098  
075  
BRADFORD  
BRINKMANN  
BRITANNIA  
BROCKWOOD  
BROKSONIC  
BROTHER  
BRUNS  
052  
123  
004,005,017,018,028,042,  
049,063,065,066,068,076,  
079,087  
062  
009  
002,067,085  
071  
CONCERTO  
CONDOR  
CONIC  
025  
098  
126  
110  
BSR  
093,118  
064  
CONTEC  
004,017,052,056,062  
**  
**  
BTC  
CONTINETAL  
EDISON  
141  
BUSH  
004,017,018,064,075,093,  
099,117  
052  
CRAIG  
105  
CANDLE  
CAPEHART  
CAPSONIC  
CARNIVALE  
CARREFOUR  
CARVER  
CASCADE  
CATHAY  
CCE  
015,025,057  
124  
CRIPTOVISION  
CROSLEY  
CROSLEY  
CROWN  
023  
110  
071  
004,018,019,052,127  
098  
015  
017  
CTC  
006,015,019,020,021,023,  
023,046  
004  
CURTIS MATHES 026,030,035,038, 25,040,  
044,084,106  
CXC  
052  
064  
018  
CYBERTON  
DAEWOO  
063,018,078  
115  
004,009,018,019,029,084,  
133  
CCI  
CENTURION  
CGE  
018  
101,123  
**  
**  
**  
**  
GB 64  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
Brand  
Code  
Brand  
Code  
DAINICHI  
DANSAI  
DAYTON  
DE GRAAF  
DECCA  
064  
EUROPHON  
FERGUSON  
FIDELITY  
FINLADIA  
FINLUX  
127  
018  
018  
004,009,019,108  
062,097,104  
106  
066  
018,028,129  
018,028,051,093,129  
118,004,062,063  
DENON  
DESMET  
DIXI  
035  
FIRST LINE  
FISHER  
098  
038,041,063,097,106,  
108,126  
003,004,018,126  
FORMENTI  
FRONTECH  
FUJITSU  
FUNAI  
018,098,103  
042,071,099  
028,051,124  
047,051,052,071,118  
052  
DUAL  
097  
DUAL TEC  
DUMINT  
DUMONT  
DYNATECH  
EB TELECOM  
ECTEC  
063  
127  
007,009  
063  
FUTURETECH  
GALAXIS  
GBC  
123,142  
105  
099  
081  
GE  
011,013,020,021,024,030,  
034,050,075,084  
**  
**  
ELBE  
116  
ELECTROBAND 056  
EC  
018,028,063,095,110,129  
004,099  
ELECTROHOME 080,106,110  
GELOSO  
GENEXXA  
GIBRALTER  
GO VIDEO  
GOLDSTAR  
ELEKTA  
ELIN  
071  
042,064  
018  
007,009,015  
026  
ELITE  
040,064,098,106  
ELMAN  
ELTA  
127  
004  
000,001,009,015,016,018,  
019,025,033,050,063,  
071,093,110,124,140  
EMERSON  
009,019,038,049,050,051,  
051,053,054,055,056  
067,072,074,075,085  
GOODMANS  
GPM  
017,018,028,051,063,133  
064  
ENVISION  
ERRES  
015  
018  
071  
GRADIENTE  
GRADIN  
022,025,046,082  
098  
EURO-FEEL  
GRAETZ  
042,099  
EUROMANN  
071  
**  
**  
**  
**  
**  
**  
GB 65  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
12. Manipulating your TV using Remote Control  
**  
Brand  
Code  
Brand  
Code  
GRANADA  
GRANDIN  
GRUNDIG  
GRUNPY  
GRUNPY  
HALIEAX  
HALLMARK  
HANSEATIC  
018,028,063,109,124  
INFINITY  
INGEKEN  
INGELEN  
INNOHIT  
INNOVA  
INTEQ  
023  
075  
139  
018,059,060,068,137  
042  
051  
052  
071  
050  
028,124  
018  
007  
INTERBUY  
INTERFUNK  
INTERVISION  
ISUKAI  
ITT  
071  
018,089,097,098,099,  
118,119  
018,042,095,099  
018,063,071,127,144  
HARLY DAVIDSON 051  
HARMAN KARDON 023  
064  
042,099,108  
HARVARD  
HCM  
052  
JACSON  
JBL  
129  
004,071,075  
097  
023  
HEMMERMANN  
HINARI  
JCB  
137  
004,017,018,051,064  
JEC  
040  
HITACHI  
094,095,096,099,102,  
108,109,110,111,112,  
113,114,124,148,016,  
017,025, 031,032,035,  
037,042,048,063,066,  
090,091  
**  
**  
JVC  
017,022,045,054  
KAISUI  
KAMP  
004,062,063,064,075  
062  
KAPSCH  
KATHREIN  
KAWASHO  
KEC  
042,095,099  
089  
HUANYU  
062  
062,077  
HUSPI ELEKTRONIK 123  
052  
HYPERVISION  
HYPSON  
HYPSON  
ICE  
134  
KENDO  
KENWOOD  
KINGSLEY  
KLH  
018,099,117,119,127,  
018,071,075  
071,075  
063,071  
064  
009,015  
062  
124  
ICES  
KLOSS  
KMC  
012  
IMPERIAL  
INDESIT  
INDIANA  
092,099,101,123  
068  
033  
KONIG  
004,005,017,018,042,061,  
068  
018  
**  
**  
**  
**  
**  
GB 66  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
Brand  
Code  
018  
Brand  
Code  
KORPEL  
KORTING  
KOYODA  
KTV  
MEDIATOR  
MEGATRON  
MEI  
018  
098  
002,035,050,109  
056  
004  
015,019,052,055,056,  
063,074  
MEMOREX  
004,006,025,026,033,036,  
038,050,070,071,106  
KUBA ELECTRONIC097  
MEMPHIS  
MGA  
124  
LENCO  
071,133,146,018,028,  
009,015,036,039,050  
071,118,124  
MIDLAND  
MINERVA  
MINUTZ  
007,016,019,020,021,034  
LG  
025  
068  
011  
LIESENK & TTER  
LIFETEC  
LLOYTRON  
LOGIK  
018  
071  
MITSUBISHI  
009,017,030,036,039,050,  
068  
016  
000,006  
MIVAR  
062  
LUMA  
099  
MOTOROLA  
MTC  
024,030  
LUXMAN  
LUXOR  
LXI  
025  
009,015,025,026,056,062  
068,094,099,102,124  
MULTISTANDARD 127  
**  
**  
007,020,023,038,040,  
050,106  
MULTITECH  
MUTIMEDIA  
NAD  
004,052,062,063,099,127  
132  
M ELECTRONIC  
MAGNAFON  
004,018,042,063,097,127  
040,044,050  
127  
106  
NAONIS  
NATIONAL  
NEC  
099  
MAGNASONIC  
MAGNAVOX  
068  
010,012,014,015,017,  
023,051,057,058,110  
009,015,017,025,046  
NECKERMANN  
NEI  
018,059,087,089,099,102  
MAJESTIC  
MANDOR  
MANESTH  
MARANTZ  
MARK  
006  
018  
051  
018  
071  
NESCO  
063,071,098,117  
015,018,023,089  
018  
NETSAT  
NIKKAI  
016,018,028,040,062,064,  
071124  
MATSUI  
004,005,018,049,063,  
092,097,117  
NIKKO  
007,015,020,029,038,040,  
050  
MATSUSHITA  
MC MICHAEL  
021,070  
110  
NISATO  
NOBLEX  
1081  
083  
**  
**  
**  
**  
GB 67  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
12. Manipulating your TV using Remote Control  
**  
Brand  
Code  
Brand  
Code  
NOKIA  
071,094,095,096,099,106,  
108,143  
PCE/PEC  
PENNEY  
040,106,108  
001,102,008,009,011,013,  
015,016,019,020,021,  
025,026,034,040,050  
NOSHI  
008  
NTC  
029  
PHASE  
PHILCO  
016  
OCEANIC  
ONWA  
042,099,106,118  
052  
009,010,012,014,015,023,  
035,057,058,085,123  
OPTIMUS  
OPTIONICA  
ORION  
038,044,070  
030,043  
PHILIPS  
007,008,009,010,011,012,  
013,014,018,019,023,  
089,110,124,138,  
018,049,051,067,085,097,  
098,118  
PHONOLA  
PILOT  
018,098  
009,015,019  
042,044  
068  
OSAKI  
OSAKI  
OSAKI  
OSAKI  
OSAKI  
OSAKI  
OSO  
016  
028  
PIONEER  
POLICOM  
POLYRON  
PORTLAND  
063  
064  
071  
071  
009,019,029  
124  
PRANONI PRINCE 099  
**  
**  
064  
PRIMA  
040,106  
OSUME  
016,028,124  
PRINZ  
124  
OTTO VERSAND 017,018,059,063,087,089,  
093,097,098,099,102,  
PRISM  
021  
PROFEX  
PROLINE  
PROSCAN  
PROTEC  
PROTECH  
PROTON  
PULSAR  
004  
108,117,118  
119  
PALLADIUM  
PANAMA  
099  
015,020  
099,127  
004,018,063,071,  
002,050  
007,009,110,124,  
063,071  
PANASONIC  
000,020,021,022,023,024,  
026,030,035,036,038,  
040,042,043,050,065,  
068,070,079,099  
PATHE CINEMA 062,098  
QUASAR  
**  
021,024,043,070,  
**  
PAUSA  
004  
**  
**  
**  
**  
GB 68  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
Brand  
Code  
Brand  
Code  
QUELLE  
005,018,087,093,097,099,  
108,117,118  
SAMSUNG  
004,009,015,016,018,019,  
025,026,050,063,071,  
078,089,124,137  
QUESTA  
017  
SAMSUX  
SANDRA  
SANSEI  
SANSUI  
SANYO  
019  
062  
084  
085  
RADIO SHACK  
009,015,016,019,020,025,  
038,043,050,052,106  
RADIOLA  
RADIOTONE  
RADIX  
018  
071  
108  
005,017,028,038,041,106,  
107,108,124,129  
RANK ARENA  
RCA  
017  
SBR  
018  
008,009,020,021,030,034  
SCHAUB LORENZ 099  
REALISTIC  
009,015,016,019,025,038,  
043,050,052,106  
SCHNEIDER  
018,064,071,097,136,143,  
147  
REKORD  
REVOX  
REX  
149  
SCIMITSU  
SCOTCH  
SCOTT  
009  
018  
050  
042,071,076,099,  
009,050,051,052,067  
RFT  
088,126,  
SEARS  
020,023,025,038,040,041,  
047,050,051,106  
**  
**  
RHAPSODY  
R-LINE  
055,056,062  
018  
SEG  
017,063,071,126,127  
049  
ROADSTAR  
ROYAL LUX  
RTF  
004,064,071  
SEI  
131  
SEI-SINUDYNE  
SELECO  
097,099,117,118,127  
018  
042,076,099,100,119,120,  
122,  
RUNCO  
SABA  
007,015  
042,095,099  
SEMIVOX  
SEMP  
052  
SAGEM  
SAISHO  
SAKIO  
139  
040  
004,005,049,071,117  
SENTRA  
SHARP  
040  
071  
017,019,030,043  
SALORA  
SAMBERS  
SAMPO  
042,094,099,102,106,124  
127  
SHOGUN  
SHORAI  
009  
118  
015,016,019  
**  
**  
**  
**  
GB 69  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
12. Manipulating your TV using Remote Control  
**  
Brand  
Code  
Brand  
Code  
SIAREM  
127  
SUPRA  
SUSUMU  
025  
SICATEL  
SIEMENS  
SIGNATURE  
SILVER  
121  
064,010,012,014,015,023,  
057,058,080  
018,059,060,061  
SYMPHONIC  
SYSLINE  
047  
006,040  
018  
017  
TADNDY  
124  
SIMPSON  
SINGER  
057,058  
TANDY  
028,030,042,063,064  
127  
TASHIKO  
TASHKO  
110  
SINUDYNE  
SKANTIC  
SKY  
049  
017,063  
099  
TATUNG  
002,018,024,028,063,124  
018  
TEC  
063,133  
127button.  
098  
SOGERA  
SOLAVOX  
SOLAVOX  
SONITRON  
SONOKO  
SONOLOR  
SONTEC  
SONY  
098  
TECHLINE  
TECHNEMA  
TECHNICS  
TECHNISAT  
TECHNOL ACE  
TECHWOOD  
TEKNIKA  
016  
042  
007,020,021,070  
130  
108  
004,018,071  
042  
051  
**  
**  
002,021,025  
018  
006,009,019,023,025,026,  
029,036,051,052,057  
005,017,073,087  
SOUND&VISION 127  
TELECO  
135  
SOUNDESIGN  
SOUNDWAVE  
SPECTRA  
SPECTRICON  
SQUAREVIEW  
SR2000  
050,051,052,057  
TELEFUNKEN  
TELEMEISTER  
TELETECH  
TELETON  
TELEVIDEON  
TENSAI  
025  
018  
098  
133  
004  
002  
017,057,063,099  
047  
098  
106  
064,093,098,118  
SSS  
009,052  
004,063,064,098  
052  
TESLA  
135  
STANDARD  
STARLITE  
STERN  
TEXET  
062,064  
110  
THOMAS  
042,076,099  
117,118  
THOMAS  
124  
SUNKAI  
THOMSON  
068  
SUPERTECH  
097  
**  
**  
**  
**  
**  
**  
GB 70  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
Brand  
Code  
Brand  
Code  
THORN  
018,028,040,087,107,  
108,110,112,128,129  
VIDEOTON  
VIDIKRON  
VIDTECH  
VISA  
094  
023  
TMK  
025,049,050  
124  
009,017,050  
TOKAI  
004,005,017,018,042,068  
TOMASHI  
TOSHIBA  
075  
VISION  
098  
017,026,038,040,069,  
106,108  
VOXSON  
VTQ  
042,099  
126  
TOSONIC  
TOTEVISION  
TOWADA  
TRIUMPH  
TV TEXT  
056  
WALTHAM  
WARDS  
063,094,099  
019  
006,009,010,011,013,014,  
015,023,025,034,040,  
043,050,051,058  
099,127  
049,069  
089  
WATSON  
WATT RADIO  
WEGA  
018,098  
UHER  
098  
097,127  
UHER  
127  
017  
ULTRA  
081,124  
127  
WHITE  
WESTINGHOUSE  
018,062,098,106  
ULTRAVOX  
UNIVERSAL  
UNIVERSAL  
UNIVERSUM  
**  
**  
WORLD-TECH  
YAMAHA  
YOKO  
133  
011  
009,015  
018,063,071,133  
108  
013  
018,071  
YORK  
VECTRO RESEARCH 015  
ZANUSSI  
ZENITH  
076,099  
006,007,029  
VESTEL  
018  
012  
013  
VICTRO  
ZONDA  
002  
VIDEOTECHNIC  
**  
**  
**  
**  
**  
**  
GB 71  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
DVD Player  
**  
**  
**  
**  
**  
**  
GB 72  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
1. Getting Started  
**  
Loading a Disc  
You can switch to DVD player mode by pressing the DVD/STB button while in DTV mode.  
1. Press the OPEN/CLOSE button to open the disc loading tray which is located at the front of  
your receiver.  
2. Put the selected disc on the tray and check that it is located correctly.  
3. Press the OPEN/CLOSE button to close the tray.  
4. The player is reading the disc. Please wait.  
**  
**  
**  
**  
**  
**  
**  
GB 73  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
2. Playing a DVD-VIDEO Disc  
**  
You can recognise the DVD-Video disc by the logo.  
Each disc has one or more chapters.  
Your receiver moves within the titles or chapters to access easily and conveniently.  
**  
DVD-VIDEO Disc  
TITLE 1  
2
TITLE 2  
2
Chapter 1  
3
Chapter 1  
3
Buttons  
**  
Marker  
Marking  
**  
A-B repeat  
**  
Zoom on/off  
**  
Play / Pause  
**  
Fast backward/ Slow motion  
**  
**  
**  
Fast forward/Slow motion  
**  
Stop  
**  
Skip previous /Frame by frame  
**  
Skip next / Frame by frame  
**  
**  
**  
**  
GB 74  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2.1 Playing a title  
1. Press the OPEN/CLOSE button on the Front panel and insert a disc.  
2. Press the OPEN/CLOSE button to close the disc loading tray.  
3. Press the  
button to play the disc.  
4. Disc menu is displayed.  
5. Select your desired item using the  
button.  
or NUMERICAL (0~9) button, and press the OK  
As the disc plays, the display shows the current chapter or title, and the elapsed playing time.  
6. Return to menu when the title is fully played.  
7. Press the button to move to the next title.  
**  
Stop/Resume Press the STOP  
button to stop playing.  
Press the button to resume playing from where you stopped playing.  
Pause/Play  
Press the  
Press the  
button to pause play.  
button again to resume playing.  
**  
2.2 General Information  
**  
**  
Press the i  
button to display the information as below while playing a DVD.  
button, BACK button or EXIT button to hide the information displayed on  
Press the i  
the screen.  
The following information is displayed.  
**  
**  
1. Title No.: Displays the title number.  
2. Chapter No.: Displays the chapter number.  
3. Play Time Information: Displays full playing time and currently playing time of the Disc or  
chapter. Time display format can be changed by the TIME button.  
4. Angle: Displays total number of angles and the number of currently playing angles.  
5. Soundtrack : Displays audio information.  
6. Repeat Mode : Displays repetition of the currently playing chapter.  
**  
**  
**  
**  
GB 75  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
2. Playing a DVD-VIDEO Disc  
**  
2.3 Search  
You can move directly to your desired chapter/title /time/marker.  
Press the SEARCH button to change search mode.  
Press the EXIT  
or BACK  
button to immediately hide search mode on the screen .  
1. Chapter/Title  
**  
1. Press the SEARCH button repeatedly to select a chapter  
or title.  
2. Enter your desired chapter or title number using the  
NUMERICAL (0~9) button when your desired item is  
displayed.  
If you enter more than the total chapter or title number, the  
number entered is discarded. In that case, enter the  
chapter or title number again.  
Press the OK 38  
button to immediately move to the beginning of a  
selected chapter or title.  
**  
**  
2. Time  
**  
1. Press the SEARCH button repeatedly to select time.  
2. Enter your desired time using the NUMERICAL (0~9)  
button when time is displayed.  
If you enter more than the total play time, the entered  
number is discarded. In that case, enter the time again.  
3. Press the OK  
button to move to the selected time  
immediately.  
3. Marker  
**  
1. Press the SEARCH button repeatedly to select Marker.  
2. Select your desired marker from the Marker list using the  
or  
button, and then press the OK  
button. The  
chapter or title is played from the marked point.  
3. Select a marked point in the Marker list and press the  
CLEAR  
button to delete the mark.  
**  
**  
**  
**  
GB 76  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
Note:  
•
If the marking list is full, you cannot add a new mark and a  
Fully Marked message is displayed.  
•
Press the Marker MARKER button to mark while watching  
a channel.  
2.4 Skipping Chapter  
You can move to the beginning of the current chapter, the next chapter, or the previous chapter.  
1. Press the SKIP NEXT  
button to move from the  
chapter currently playing to the next chapter.  
2. Press the SKIP PREVIOUS  
button to move to the  
beginning of the chapter currently playing.  
3. Press the SKIP PREVIOUS  
button again to move to  
the beginning of the previous chapter.  
Note: Press the SKIP NEXT  
button to display the number of the chapter  
currently moving on the top right of the screen.  
or SKIP PREVIOUS  
**  
**  
2.5 Repeat Mode  
You can repeat the currently playing chapter, title or disc.  
1. Press the REPEAT MODE button to display current repeat  
mode during playing.  
2. Press the REPEAT MODE button repeatedly to change  
repeat mode in the order of Chapter -> Title ->Disc -> Off.  
Note: Select Off to disenable repeat mode.  
**  
**  
**  
**  
GB 77  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
2. Playing a DVD-VIDEO Disc  
**  
2.6 Repeat a section of disc  
You can set the sections to repeatedly switch between each other.  
1. Press the A  
repeat point to A.  
2. Press the A  
B
button while playing a disc to set the  
B
button repeatedly to repeat playing  
between Section A and B.  
3. Play the setting start and end section repeatedly.  
4. If the A B setting is displayed on the screen, press the A  
B
button to release the setting.  
If the A B setting is not displayed on the screen, press  
the  
press the  
button to display the screen setting, and then  
button again to release the setting.  
2.7 Fast Playing  
Press the FORWARD  
playing speed.  
button to increase the forward  
button to increase the backward  
**  
**  
Press the FORWARD  
playing speed.  
Each time you press the FORWARD  
or BACKWARD  
button, the playing speed options are rotated as below.  
Forward  
x2 -> x4 -> x8 -> x16 -> normal play -> x2 -> x4 ...  
x2 -> x4 -> x8 -> x16 -> normal play-> x2 -> x4 ...  
Backward  
Note:  
•
The DVD subtitle is displayed as forward x2. If you increase the playing speed faster than this,  
the subtitle is not displayed.  
•
Press the button to play at normal speed.  
**  
**  
**  
**  
GB 78  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
2.8 Slow Motion  
1. Press the PAUSE  
button to temporarily stop the  
button to play in slow motion.  
currently playing DVD disc.  
**  
2. Press the FORWARD  
Each time you press the FORWARD  
button, the  
slow motion speed options are rotated as below.  
Slow motion  
5%->8%->12%->20%->30%->40%  
->50%-> 60%->70%->80%->90%->  
normal play -> 5%->8%......  
Note: Press the button to play at normal speed.  
2.9 Zooming in and out  
1. Press the ZOOM  
button to zoom in or out. Press the  
ZOOM  
button to turn On. Press the ZOOM  
**  
**  
button to turn Off.  
2. Press the ZOOM+  
in or out.  
or ZOOM-  
button to zoom  
Press the  
button to move within the zoomed  
in/out screen.  
2.10 Subtitle/Audio  
If the disc provides several types of subtitles or audio information, you can change the subtitle or  
audio.  
Press the SUBTITLE  
or AUDIO  
button repeatedly to  
select your desired subtitle /audio language.  
Note:  
•
Subtitle/audio languages can be changed according to the  
DVD title.  
•
Select Off in Subtitle to not display a subtitle.  
**  
**  
**  
**  
GB 79  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
2. Playing a DVD-VIDEO Disc  
**  
2.11 Listening Mode  
Press the OPT+  
button repeatedly to select your desired  
listening mode.  
Note: Listening mode can be different according to  
DVD title.  
2.12 Time display  
Press the TIME  
button repeatedly to select your desired  
listening mode.  
Total elapsed  
Total remain  
Single elapse  
Single remain  
Note:  
Displays the total elapsed time since the  
title has been playing.  
Displays the total remaining time to be  
played.  
**  
**  
Displays the elapsed time for the currently  
playing chapter.  
Displays the remaining time to be played for  
the currently playing chapter.  
•
The selected time play mode is also adjusted in the front panel.  
•
Total time on the screen is displayed as Total in the front panel; Single chapter on the screen  
is displayed as Single in the front panel.  
2.13 Angle  
You can select the camera angle.  
Press the ANGLE  
button repeatedly to select your desired  
angle.  
Note: The number of angles can be changed according to the  
DVD.  
**  
**  
**  
**  
GB 80  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
3. Playing a Audio CD  
**  
3.1 Playing Audio CD  
1. Press the OPEN/CLOSE button on the Front panel and  
insert a disc.  
2. Press the OPEN/CLOSE button to close the disc loading  
tray.  
3. The main menu will be displayed to list all audio files in the  
disc as below.  
4. Select your desired item using the  
played.  
button and press the OK  
button. The audio is  
You can move by page using the PAGE-/PAGE+  
button.  
You can change play mode by pressing the PLAY MODE button repeatedly.  
You can also change repeat mode by pressing the REPEAT MODE button repeatedly.  
Note: You can play tracks in the same way as with a disc.Please refer to chapter 2.2 Playing  
a Title.  
3.2 Detail Information  
**  
**  
If you select MP3 file on the Main Screen, press the i  
button to display its detailed information.  
You can press the i button, BACK button or EXIT  
button to hide the information displayed on the screen and return  
to main screen.  
Note: This is only available for MP3 files.  
**  
**  
**  
**  
GB 81  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
3. Playing a Audio CD  
**  
You can see current status of your audio player at a glance.  
The following information is displayed.  
**  
**  
**  
**  
1. Track No or  
2. Play Status  
3. Time Display  
4. Listening Mode  
5. Play Mode  
Displays the track number.  
Displays the play status.  
Displays the currently playing time of an audio CD.  
Displays listening mode.  
Displays play mode.  
6. Repeat Mode  
Displays repetition of the currently playing track.  
**  
**  
**  
**  
GB 82  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
3.3 Playlist Menu  
1. Press theLIST  
button while playing an Audio Disc to  
display Playlist menu.  
2. Press the  
menu.  
button to select your desired Playlist  
3. Press the OK  
or button to move to sub-menu or  
select an option.  
Note: If Playlist is On, the Track Number is displayed in the assigned order in the Playlist and  
the Disc in Repeat Mode is disabled.  
Edit Playlist  
Edits the playlist. Refer to 3.10 to edit.Select your  
desired tracks and press the OK button. Press the  
BACK or EXIT button to return to the Playlist.  
Add All Tracks to Playlist  
Enable Playlist  
Adds all tracks on the audio disc to the playlist.  
The playlist is set to On and track(s) on the playlist is  
(are) played.  
**  
**  
Disable Playlist  
Delete Playlist  
The playlist is set to Off and all tracks on the audio disc  
are played.  
All tracks on the playlist are deleted and the playlist is  
enabled.  
3.4 Search  
You can directly move to your desired place. Press the SEARCH button to change search mode.  
1. Track  
**  
1. Press the SEARCH button to select a track.  
2. Enter your desired track number using the NUMERICAL  
(0~9) button. If you enter more than the total number, the  
number entered is discarded. In that case, enter the track  
number again.  
3. Press the OK  
button to move to the beginning of  
selected track immediately.  
**  
**  
**  
**  
GB 83  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
3. Playing a Audio CD  
**  
2. Time  
**  
1. Press the SEARCH button repeatedly to select time.  
2. Enter your desired time using the NUMERICAL (0~9)  
button when time is displayed. If you enter more than the  
total play time, the entered number is discarded. In that  
case, enter the time again.  
3. Press the OK  
button to move to the selected time  
immediately.  
Note: Time moves to the appropriate point within current playing track.  
3. Marker  
**  
1. Press the SEARCH button repeatedly to select a Marker.  
2. Select your desired marker from Marker list using the  
button, and then press the OK  
button. The track is  
played from the marked point.  
3. Select a marked point in the Marker list and press the  
CLEAR button to delete the mark.  
**  
**  
Note:  
•
If you press the MARKER button during playing a track, it is immediately marked at the point.  
•
If the marking list is full, you cannot add a new mark and a Fully Marked message is  
displayed.  
3.5 Listening Mode  
Press the OPT+  
button repeatedly to select your desired listening mode.  
Note: If you change listening mode, the sound is  
immediately changed into the selected option.  
**  
**  
**  
**  
GB 84  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
3.6 Time Display  
Press the TIME  
button repeatedly to select your desired listening mode.  
Total  
Displays the total time of a disc.  
Total elapsed  
Displays the total elapsed time since the  
disc has been playing.  
Total remain  
Displays the total remaining time to be  
played for the disc.  
Single  
Displays the total time of the current track.  
Single elapsed  
Displays the elapsed playing time of the  
current track.  
Single remain  
Displays the remaining time to be played for  
the currently playing track.  
Note: The displayed time mode on the screen is also adjusted in the front panel.  
3.7 Fast Playing  
**  
**  
1. Press the FORWARD  
button to increase the forward  
button to increase the  
playing speed .  
2. Press the FORWARD  
backward playing speed.  
3. Each time you press the FORWARD  
or  
BACKWARD  
button, the playing speed options are  
rotated as below.  
**  
Forward  
Backward  
x2 -> x3 -> x4 -> normal play -> x2 -> x3 ...  
x2 -> x3 -> x4 -> normal play -> x2 -> x3 ...  
Note:  
•
Press the button to play at normal speed.  
•
This is also applied to menu-playback, audio main screen, and playlist.  
**  
**  
**  
**  
GB 85  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
3. Playing a Audio CD  
**  
3.8 Play Mode  
1. Press the PLAY MODE  
button during playing to  
display play mode.  
2. Press the PLAY MODE  
button repeatedly to rotate  
the play mode in the order of Normal -> Shuffle ->Intro ->  
Normal...  
**  
Normal  
Shuffle  
Intro  
Plays in normal track order.  
Plays in random track order.  
Plays the beginning of a track for 10  
seconds.  
3.9 Repeat Mode  
1. Press the REPEAT MODE button during playing to display  
current repeat mode.  
2. Press the REPEAT MODE button repeatedly to rotate the  
repeat mode in the order of Off -> Disc -> Track ->  
Playlist -> Off.  
**  
**  
**  
Note:  
•
•
•
Select Off to disenable repeat mode.  
If the playlist is set to Off, you cannot select repeat mode.  
The Disc repeat mode is disable during playing in the Playlist.  
3.10 Playlist Editor  
You can edit the playlist to play music file with the making lists.  
1. Press the PROGRAM  
or LIST  
button during  
playing to display Playlist Editor.  
2. Select Edit Playlist using the  
or  
button and press  
the OK  
button.  
**  
**  
**  
**  
GB 86  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Settings (DVD part)  
**  
1. Add Track  
**  
Select your desired track from All, and then press the OK  
button or directly enter your desired  
track number using the NUMERICAL (0~9) button to add to the Playlist.  
2. Delete Track  
**  
1. When All is highlighted, press the ANGLE  
button to move the highlight into Playlist.  
button to delete it.  
2. Select your desired track and press the CLEAR  
3. Play Track  
**  
When you complete editing the playlist, press the PLAY/PAUSE  
button to play tracks in the  
assigned order on the Playlist.  
Note: Directly enter your desired track number in playlist using the NUMERICAL (0~9) button,  
and press the OK  
button to add to the Playlist.  
3.11 MP3 Disc Scan  
**  
**  
In case of MP3 Disc, you can scan the total play time of the mp3 file exists in the disc.  
1. Press the DISC MENU button to scan an MP3 Disc.  
2. Press the OK or button to start scanning.  
3. The total time is displayed when completing scanning.  
Note: If the tray is open and then closed, the scanning  
process is reset.  
You can set all other items suitable for your environment.  
Note:  
•
Press the BACK  
or button to save the changes and  
return to the previous menu. Press the MENU  
or EXIT  
button to exit the Menu screen.  
•
You can easily select all menu items using the assigned  
numerical button for each menu.  
**  
**  
**  
**  
GB 87  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Settings (DVD part)  
**  
4.1 Language  
You can set Language for Menu, Audio, and Subtitle.  
1. Press the MENU button.  
2. Select Language using the  
OK or Stereo Normal.  
button, and press the  
1. Player Menus/Disc Menus/Disc Audio/Disc Subtitle Language  
**  
You can set the language for Menu, Audio and Subtitle. Default language is English.  
1. Select Player Menus/ Disc Menus/ Disc Audio/Disc Subtitle Language using the  
button.  
2. Press the OK  
or button to display the available Language List.  
button, and press the OK  
3. Select your desired language using the  
button.  
**  
**  
Disc Menus  
Disc Audio  
Disc Subtitle  
Set the language of the Disc title.  
Set the audio language of the DVD disc.  
Set the subtitle language of the DVD disc.  
**  
**  
**  
**  
GB 88  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Settings (DVD part)  
**  
4.2 Audio  
You can set Audio.  
1. Press the MENU  
button.  
2. Select Audio using the  
button, and press the OK  
or button.  
1. LPCM  
You can select digital audio output according to the type of audio system you use.  
Select LPCM using the  
button , and press the OK  
or button.  
PCM  
Set when connecting to an audio system without a Dolby Digital, DTS, or  
other special decoder.  
**  
**  
2. Dynamic Range  
You can set the dynamic range.  
Select Dynamic Range using the  
button, and press the OK  
or button.  
Maximum  
Standard  
you can set the dynamic range to maximum.  
Light compression of Dolby Digital sound. Set this when listening at low  
volume in night. If you connect to a TV with a RCA socket, we will  
recommend Standard for user  
Minimum  
Heavy compression of Dolby Digital sound. Set this when listening the TV  
by connecting by RF cable. If you connect to a TV with a RF socket, we will  
recommend Minimum for user  
3. Downmix Mode  
You can set the downmix mode.  
Select Downmix Mode using the  
button, and press the OK  
or button. You can select  
one option from Dolby Surround or Stereo Normal.  
**  
**  
**  
**  
GB 89  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Settings (DVD part)  
**  
4.3 Display  
You can set video display.  
1. Press the MENU  
button.  
2. Select Display using the  
button, and press the OK  
or button.  
**  
1. TV Aspect  
**  
You can set the aspect ratio of your TV.  
1. Select TV Aspect using the  
button, and press the OK  
or button.  
2. Select one option among 16:9 Widescreen/4:3 Letter Box/4:3 Pan&Scan using the  
button, and press the OK button.  
**  
**  
2. SCART Output  
**  
You can set the scart output.  
1. Select SCART Output using the  
button, and press the OK  
or button.  
2. Select one option among CVBS/S-Video/RGB using the  
button, and press the OK  
button.  
**  
CVBS/S-Video/RGB  
If you set the YPbPr/RGB switch which is located in the back of  
your receiver,LPCM to YPbPr with setting scart output to RGB,  
the video signal is not output to scart. Please use the component  
terminal.  
3. On Screen Info  
Display the option information.  
Select On Screen Info using the  
button, and press the OK  
or button.  
On  
Off  
Display the on screen information when you change the option.  
Not display.  
**  
**  
**  
**  
GB 90  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Settings (DVD part)  
**  
4. Panel Display  
You can set the front luminosity.  
1. Select Panel Display using the  
button, and press the OK  
or button.  
button, and press the  
2. Select one option among Dim/Bright/Dim for Playback using the  
OK  
**  
button.  
Dim  
Bright  
Front panel luminosity is dim.  
Front panel luminosity is bright.  
5. Power Saving  
You can set the power saving.  
1. Select Power Saving using the  
button, and press  
the OK  
2. Select one option among Screen Saver Time/Audio  
Screen Saver/Standby Time using the button, and  
or button.  
press the OK  
or button.  
**  
**  
Screen Saver Time  
Audio Screen Saver  
Standby Time  
If there's no action for assigned amount of time  
(3min/10min/30min), screen saver is run. If the screen saver time is  
set to NEVER, the screen saver time is not enabled.  
If standby time is set to On, audio is muted while the screen saver  
is on. If standby time is set to Off, the audio screen saver is not  
enabled.  
If the assigned amount of time (5min/15min/35min) has elapsed  
without playing, it automatically goes to Standby status. If Standby  
time is set to NEVER, Standby time is not enabled.  
**  
**  
**  
**  
GB 91  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Settings (DVD part)  
**  
4.4 Disc  
You can set the option of Disc.  
1. Press the MENU  
button.  
button, and press the OK  
2. Select Disc using the  
or button.  
1. Video CD Playback Control  
You can set the playback control of video CD.  
Select Video CD Playback Control using the  
button, and press the OK  
or button.  
On  
Off  
Display video CD playback when the video CD is playing.  
Not display video CD playback.  
**  
**  
2. Player Version  
You can view player information.  
Select Player Version using the  
button, and press the OK  
or button.  
Confirm the information about Player Version and Release Date.  
4.5 Parental Control  
You can set parental control and change your password.  
1. Press the MENU  
2. Select the Parental Control using the  
press the OK or button.  
button.  
button, and  
3. When prompting message is displayed to ask Password,  
enter the Password using the NUMERICAL (0~9) button.  
**  
**  
**  
**  
GB 92  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
4. Settings (DVD part)  
**  
1. Country  
You can set the Country.  
Select Country using the  
button, and press the OK  
or button.  
International  
USA  
You can set your desired country.  
You can set Country to USA.  
2. Parental Level  
You can set the parental level.  
1. Select Parental Level using the  
button, and press  
the OK  
or button.  
2. If Country set to International, select one option among  
Unrestricted / General / Most Audience / Mature Young  
/ Teenage / Mature Teenage / Mature Audience / Adult /  
Always Restricted using the  
OK button.  
If Country set to USA, select one option among  
Off/G/PG/PG-13/R/NC-17/X using the button, and  
press the OK button.  
button, and press the  
**  
**  
Note: When you set to Unrestricted, the all discs play without password.  
3. Password  
You can change the current password into new one.  
1. Select Change Password using the  
press the OK or button.  
2. Enter New Password using the NUMERICAL(0~9) button,  
and select OK and press OK button.  
3. Enter the New Password again to confirm the Verify  
button, and  
Password, and select OK and press the OK  
button.  
Note: The Default Password is 0000. If you have forgotten your Password, please contact your local  
product distributor.  
**  
**  
**  
**  
GB 93  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Appendix1. Menu Map  
**  
STB  
**  
**  
**  
**  
**  
**  
GB 94  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
DVD  
**  
**  
**  
**  
**  
**  
GB 95  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Appendix2. Trouble Shooting  
**  
Before contacting your local service, please make sure following instructions. If the product does not  
work normally after completing the following trouble shooting, please contact your local product  
distributor or service centre.  
STB and DVD  
1. No message is displayed on the front panel or product has no power  
- Check the main power cable and check that it is plugged into a suitable power outlet.  
- Check whether the Power Switch is On.  
2. No picture  
- Make sure that the product is in Operation Mode.  
- Make sure that the AV Cable is firmly connected to the TV.  
- Make sure that Antenna line is correctly connected to the equipment.  
- Check the brightness level of TV.  
- Check the channel is on air.  
3. Poor picture & sound quality  
- Install the antenna in a place where there is no obstacle.  
- Make sure there is no mobile phone or microwave oven near the equipment.  
- Use 75 coaxial cable to connecting TV and antenna.  
4. No or poor sound  
- Check the volume level of the TV and Receiver.  
- Check the Mute status of the TV and product.  
- Press the Audio button to change the Sound Track type.  
**  
**  
5. Remote controller does not operate  
- To control the equipment with the remote controller, the remote controller's top end should  
directly point towards the receiving part of receiver's remote controller.  
- Check the battery of Remote controller.  
6. Reservation is not available  
- Check whether it it not overlapped with other reservation.  
- Cehck whether the power switch is off.  
7. Video from the VCR is displayed but audio is not played.  
- Audio may not sound when you watch the video from the VCR through the RF terminal of the  
TV when the video signal is inputted from SCART of your receiver. To watch video from the  
VCR through RF terminal, connect the VCR and TV with the RF cable. (For more information,  
refer to the VCR user manual.)  
**  
**  
**  
**  
GB 96  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
DVD only  
1. Disc can't be played  
- Ensure the disc label is upwards.  
- Clean the disc.  
- Check if the disc is defective by trying another disc.  
- Check region code.  
2. No return to start-up screen when disc is removed.  
- Reset by switching the player off, then on again.  
- Check to see if the proramme requires another disc to be loaded.  
3. Distored sound from Hi-Fi amplifier  
- Check to make sure that no audio connections are made to the amplifier phono input.  
4. No color in picture  
- The disc format is not according to the TV-set used.(PAL/NTSC)  
Error Message (STB only)  
Error message  
No or bad signal  
Possible causes  
What to do  
Adjust aerial.  
The aerial is not pointing properly.  
**  
**  
Check the cable from the aerial.If you  
cannot resolve the problem you may  
need to have your aerial and  
installation tested by a professional.  
The channel is  
scrambled or not  
available.  
The channel has signal, but no audio Confirm if the channel is currently on  
or video.  
air.  
The channel is not deleted by  
broadcasting company.  
The channel is for data broadcasting. Cannot watch the channel in usual  
way.  
The channel is  
scrambled.  
This digital terrestrial receiver does  
not support the service that enables to  
descramble the scrambled channels.  
The audio is not  
available.  
The channel has signal, but no Audio. Press the Audio button to confirm if  
the channel has Audio.  
**  
**  
**  
**  
GB 97  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Appendix3. Specification  
**  
Tuner & Channel  
RF Loop through Output connector  
Frequency Range  
IEC-Type, IEC 169-24, male  
48.5MHz to 226.5MHz (VHF)  
470MHZ to 862MHz (UHF)  
-10 to –70dBm  
1Signal Level  
Demodulation  
Mode  
OFDM  
2K, 8K  
MPEG Transport Stream A/V  
Decoding  
Transport Stream  
MPEG-2 ISO/IEC 13818  
Transport Stream Specification  
MPEG2 MP@ML  
Profile Level  
Video Input Rate  
1Aspect Ratio  
15 Mbit/s Max  
4:3, 16:9 Letter box  
Video Resolution  
Audio Decoding  
Audio Mode  
720x576, 720x480  
MPEG/MusiCam Layer I & II  
Single channel/Dual channel/Joint Stereo/Stereo  
**  
**  
Memory  
Flash Memory  
4 Mbytes  
16 Mbytes  
8 Kbytes  
Graphics (MPEG) & System Memory  
EEPROM  
Available Disc(DVD)  
Available Reading  
MP3/Audio CD/VCD/Photo  
CD/CD-R,RW/DVD-R,RW/DVD+R,RW,SVACD  
A/V & Data In/Out  
Video  
RCA/SCART Video Output(CVBS, RGB, S-Video)  
Audio R/L  
RCA/SCART Volume and Mute Control (Resolution:  
20 bits DAC, MAX. 2Vrms)  
S/PDIF  
Digital Audio Output, Fiber-Optic(Resolution : 20 bits)  
Transfer Rate:115,200 bps,3 pin Socket type  
RS-232C  
**  
**  
**  
**  
GB 98  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
Power Supply  
Input Voltage  
Type  
90~250V AC, 50/60Hz  
SMPS  
Power Consumption  
Stand by Power  
Protection  
Max. 35W  
5W  
1Separate Internal Fuse.  
The input should be protected against lighting  
Physical Specification  
Size  
420mm X 75mm X 300 mm  
Around 4.8Kg  
Weight (Net)  
Operating Temperature  
Storage Temperature  
0
to +45  
to +70  
-10  
**  
**  
**  
**  
**  
**  
GB 99  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Appendix4. Glossary  
**  
Component Video (Y Pb Pr)  
This method of transmitting pictures produces the highest quality as the video signal is split into its  
Y(brightness), U and V(red minus rightness, blue minus brightness )components. The signal can  
also be sent as interlaced or as progressive scan.  
Dolby Digital  
Dolby Laboratories standard for transmitting 5.1 channels. Five full-value channels are transmitted in  
this acoustic playback system. A further channel is used for low frequencies(effects). The  
loudspeakers are arranged front left, front middle, rear left and rear right. This system is currently the  
most common system and is used in cinemas.  
DTS (Digital Theater Systems)  
DTS are trademarks of Digital Theater Systems Inc.  
Transmission standard for 5.1 channels from Digital Theater Systems Inc. This is the second most  
wide-spread after Dolby Digital.  
DVD (Digital Versatile Disc)  
**  
**  
A new storage medium that combines the convenience of the compact disc with the latest digital  
video technology. DVD video uses modern MPEG2 data compression technology that enables an  
entire feature film to be stored on a single five inch disc.  
Programme Guide (Electronic Programme Guide, EPG)  
A electronic programme guide (EPG) that comes with the broadcast to a particular satellite, Note that  
every station fills the EPG differently or not, so differences in the EPG are not necessarily receiver  
errors.  
Frequency  
The number of cycles or events per one second, which is expressed in the unit of hertz  
FTA (Free- To-Air)  
An unscrambled broadcast, which you can view without additional payments to a service provider.  
**  
**  
**  
**  
GB 100  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
MP3  
MP3 files are highly compressed music files. The data is compressed to 1/10 of the volume of the  
original audio material using a special process. This means that 10 hours of music can be stored on  
a single CD.  
OSD (On Screen Display)  
The function that displays the information about the monitor that the user needs or has to know on  
the screen directly. OSD information includes brightness, contrast, tuning, RGB adjustment, and  
screen size and positions (top, left, width, and height), and so on.  
OTA (Over The Air)  
Means that software downloads where the manufacturer reserves the right to decide when and  
where to release them through satellite system.  
SCART  
**  
**  
A 21-pin connector used for connection of this product, VCR and TV. Also called Euroconnector or  
Peritel connector.  
S/PDIF (Sony/Philips Digital Interface format)  
Standard format for digital audio output. It outputs audio signals directly as digital audio signals  
without changing into analog signals because conversion into analog signals can degrade signal  
quality.  
S-Video  
This is used to transmit the brightness signal(Y signal) and color signal(C signal) separately.  
**  
**  
**  
**  
GB 101  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
Appendix5. Service and Support  
**  
You can get information such as a troubleshooting guide, software upgrades and product support  
guide from the following web sites and call center (Hotline).  
Please try to contact to your local dealers first when you have any problem.  
Web site and e-mail  
Homepage  
http://www.humaxdigital.com  
English  
Deutsch  
Arabic  
http://www.humaxdigital.com/Deutsch/  
http://www.humaxarabia.com  
**  
HCSA (Humax Customer Service Area)  
Software Download, Information and Technical Q&A  
http://www.humaxdigital.com/hcsa/  
English  
http://www.humaxdigital.com/Deutsch/hcsa/  
Deutsch  
**  
E-mail (Technical Q&A)  
**  
**  
[email protected]  
[email protected]  
Europe & North Africa  
Germany  
[email protected]  
[email protected]  
Middle East  
Asia & Other area  
**  
**  
**  
**  
GB 102  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
**  
**  
**  
**  
**  
**  
**  
Call Center  
Humax Middle East Call Center (Dubai, UAE)  
Tel: +971 (0)4 359 2323 (Open: 9:00 - 20:00 / close on Friday)  
E-mail: [email protected]  
Open: Local Time in Dubai (GMT+4)  
9:00 - 20:00 (Saturday - Thursday, close on Friday)  
Support Language: English/Arabic  
**  
Humax Hotline (Germany)  
Germany: 01805 778 870 ( 0,12/Min)  
Other Countries: + 49 1805 778 870 ( 0,12/Min+ International Call Charge)  
Open: Local Time in Germany (GMT+1)  
8:00 - 20:00 (Monday - Friday)  
8:00 - 18:00 (Saturday)  
Support Language: Deutsch/English  
**  
**  
**  
Humax BTCI Hotline (Premiere Model)  
Germany: 01805-778900 ( 0,12/Min)  
Austria: 0900-900633 ( 0,33/Min)  
**  
For hardware repair, please refer to support website. (Homepage or HCSA)  
**  
**  
**  
**  
GB 103  
**  
**  
**  
**  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Grinder G1806 User Manual
Haier Microwave Oven EA 1770EG User Manual
Haier Ventilation Hood HHX6130 User Manual
Harbor Freight Tools Sander 05154 User Manual
Hasbro Games Simon User Manual
Healthrider Treadmill HRTL16900 User Manual
Honeywell Mouse HWC BELT WEH QS User Manual
Hotpoint Oven SY36B User Manual
HP Hewlett Packard Computer Monitor EM869AA User Manual
HP Hewlett Packard Welder 53A User Manual