Models: HTC 6
HTC 9
HD 6
HD 7
HD 9
HS 6
HS 7
HS 9
Download from Www.Somanuals.com. All Manuals Search And Download.
A
B
Fig.3A
Fig.3B
HD 6
HD 7
HD 9
D
C
A
B
A
B
HTC 6
HTC 9
Fig.4
1
2
C
B
C
A2
B
Fig.5
Fig.6
5
Download from Www.Somanuals.com. All Manuals Search And Download.
A
B
C
C
B
B
D
E
A
D
E
A
Fig.7
Fig.8
Fig.9
6
Download from Www.Somanuals.com. All Manuals Search And Download.
User instructions
Summary
GB
Installation 4 - 5
General 8
GB
English, 7
Safety precaution 8
Installation instructions 8
Electric Connection
Fixing to the wall
Fixing the decorative telescopic flue
Filtering version
Use and maintenance 9
Replacing halogen light bulbs
Commands
HTC 6
HTC 9
HD 6
HD 7
HD 9
HS 6
HS 7
HS 9
Download from Www.Somanuals.com. All Manuals Search And Download.
General
children or infirm persons without supervision
H)Young children should be supervised to ensure
they do not play with the appliance
I) There shall be adequate ventilation of the room
when the rangehood is used at the same time as ap-
pliances burning gas or other fuels
General
GB
Carefully read the following important information regard-
ing installation safety and maintenance.
Keep this information booklet accessible for further con-
sultations.
L) There is a risk of fire if cleaning is not carried out
in accordance with the instructions
The appliance has been designed for use in the ducting
version (air exhaust to the outside – Fig.1B), filtering ver-
sion (air circulation on the inside – Fig.1A).
This appliance conforms to the European Directive
EC/2002/96, Waste Electrical and Electronic Equipment
(WEEE). By making sure that this appliance is disposed
of in a suitable manner, the user is helping to prevent
potential damage to the environment or to public health.
Safety precaution
1. Take care when the cooker hood is operating simul-
taneously with an open fireplace or burner that depend
on the air in the environment and are supplied by other
than electrical energy, as the cooker hood removes the
air from the environment which a burner or fireplace need
for combustion.
The negative pressure in the environment must not exceed
4Pa (4x10-5 bar).
Provide adequate ventilation in the environment for a
safe operation of the cooker hood. Follow the local laws
applicable for external air evacuation.
The symbol on the product or on the accompanying
paperwork indicates that the appliance should not be
treated as domestic waste, but should be delivered to
a suitable electric and electronic appliance recycling
collection point. Follow local guidelines when disposing
of waste.
For more information on the treatment, re-use and
recycling of this product, please contact your local
authority, domestic waste collection service or the shop
where the appliance was purchased.
Before connecting the model to the electricity net-
work:
- control the data plate (positioned inside the appliance)
to ascertain that the voltage and power correspond to
the network and the socket is suitable. If in doubt ask a
qualified electrician figure 1C.
Installation instructions
Assembly and electrical connections must be carried out
by specialised personnel.
- If the power supply cable is damaged, it must be replaced
with another cable or a special assembly, which may be
obtained direct from the manufacturer or from the Techni-
cal Assistance Centre.
• Electric Connection
The appliance has been manufactured as a class II,
therefore no earth cable is necessary.
- This device must be connected to the supply network
through either a plug fused 3A or hardwired to a 2 fase
spur protected by 3A fuse.
The connection to the mains is carried out as follows:
BROWN = L line
BLUE = N neutral
If not provided, connect a plug for the electrical load indi-
cated on the description label. Where a plug is provided,
the cooker hood must be installed in order that the plug
is easily accessible. An omnipolar switch with a minimum
opening of 3mm between contacts, in line with the electri-
cal load and local standards, must be placed between the
appliance and the network in the case of direct connection
to the electrical network.
2. Warning!
In certain circumstances electrical appliances may
be a danger hazard.
A)Do not check the status of the filters while the
cooker hood is operating
B) Do not touch bulbs or adjacent areas, during
or straight after prolonged use of the lighting
installation.
C)Flambè cooking is prohibited underneath the
cooker hood
D)Avoid free flame, as it is damaging for the filters
and a fire hazard
E) Constantly check food frying to avoid that the
overheated oil may become a fire hazard
F) Disconnect the electrical plug prior to any mainte-
nance.
• The minimum distance between the support surfaces
of the cooking pots on the cooker top and the lowest part
of the cooker hood must be at least 65 cm. If a connec-
tion tube composed of two parts is used, the upper part
must be placed outside the lower part. Do not connect
the cooker hood exhaust to the same conductor used to
circulate hot air or for evacuating fumes from other appli-
ances generated by other than an electrical source.Before
proceeding with the assembly operations, remove the anti-
G)This appliance is not intended for use by young
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Use and maintenance
grease filter(s) (Fig.8) so that the unit is easier to handle.
In the case of assembly of the appliance in the suction
version prepare the hole for evacuation of the air.
Insert the upper flue into the lower flue. Fix the lower flue
GB
to the hood using the screws B provided (Fig.5), extract
the upper flue up to the bracket and fix it with the screws
B (Fig.3B).
• We recommend the use of an air exhaust pipe with a
diameter of 150.
If a pipe with a smaller diameter is used, the efficiency
of the product may be reduced and its operation may
become noisier
To transform the hood from a ducting version into a filtering
version, ask your dealer for the charcoal filters and follow
the installation instructions.
• Filtering version
Install the hood and the two flues as described in the para-
graph for installation of the hood in ducting version.
To assemble the filtering flue refer to the instructions
contained in the kit.
If the kit is not provided, order it from your dealer as ac-
cessory.
Please note:
If your version of the appliance has decorative glass be-
fore installing the hood, carry out the following steps as
shown in figure 4:
1 - Remove both the cooker hood body B and the glass
panel A from the packaging and place them horizontally
on a secure surface.
The filters must be applied to the suction unit positioned
inside the hood.
2 -Take the glass panel A and position it above the cooker
hood body B.
They must be centred by turning them 90 degrees until
the stop catch is tripped (Fig.9).
3 - Fix the glass panel securely to the cooker hood body
using the 4 sleeves C and 4 screws D as indicated.
Use and maintenance
• Fixing to the wall
Drill the holes A1 respecting the distances indicated
(Fig.2).
Fix the appliance to the wall and align it in horizontal posi-
tion to the wall units.
• We recommend that the cooker hood is switched on
before any food is cooked. We also recommend that the
appliance is left running for 15 minutes after the food is
cooked, in order to thoroughly eliminate all contaminated
air.
When the appliance has been adjusted, definitely fix the
hood using the screws A2 (Fig.5).
For the various installations use screws and screw an-
chors suited to the type of wall (e.g. reinforced concrete,
plasterboard, etc.).
If the screws and screw anchors are provided with the
product, check that they are suitable for the type of wall
on which the hood is to be fixed.
The effective performance of the cooker hood depends on
constant maintenance;the anti-grease filter and the active
carbon filter both require special attention.
•The anti-grease filter is used to trap any grease particles
suspended in the air, therefore is subject to saturation (the
time it takes for the filter to become saturated depends on
the way in which the appliance is used).
- To prevent potential fire hazards, the anti-grease filters
should be washed a minimum of every 2 months (it is
possible to use the dishwasher for this task).
- After a few washes, the colour of the filters may change.
This does not mean they have to be replaced.
• Fixing the decorative telescopic flue
warning! If your appliance model features the lower
connector with a tab, before fixing it in place bend the
tab inwards using a pair of pliers, as illustrated in figure
5, step1.
If the replacement and washing instructions are not fol-
lowed, the anti-grease filters may present a fire hazard.
•The active carbon filters are used to purify the air which
is released back into the room.
Take care not to scratch the duct; wear gloves when re-
moving the protective film. (Fig. 3A).
Arrange the electrical power supply within the dimensions
of the decorative flue.
The filters are not washable or re-usable and must be
replaced at least once every four months.
If your appliance is to be installed in the ducting version
or in the version with external motor, prepare the air ex-
haust opening.
Adjust the width of the support bracket of the upper flue
(Fig.3B).
Then fix it to the ceiling using the screws A (Fig.3B) in
such a way that it is in line with your hood and respecting
the distance from the ceiling indicated in Fig.2.
Connect the flange C to the air exhaust hole using a con-
nection pipe (Fig.5).
The active carbon filter saturation level depends on the
frequency with which the appliance is used, the type of
cooking performed and the regularity with which the anti-
grease filters are cleaned.
• Clean the cooker hood frequently, both inside and outside,
using a cloth which has been dampened with denatured
alcohol or neutral, non-abrasive liquid detergents.
• The light on the cooker hood is designed for use during
cooking and not for general room illumination. Extended
use of the light reduces the average duration of the bulb.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
• Replacing halogen light bulbs (Fig. 6).
GB
To replace the halogen light bulbs B, remove the glass
pane C using a lever action on the relevant cracks.
Replace the bulbs with new ones of the same type.
Caution: do not touch the light bulb with bare hands.
•Commands: (Fig.7 A-B) mechanical the key symbols
are explained below:
A = LIGHT
B = OFF
C = SPEED I
D = SPEED II
E = SPEED III
THE MANUFACTURER DECLINES ALL RESPONSIBIL-
ITY FOR EVENTUAL DAMAGES CAUSED BY BREACH-
ING THE ABOVE WARNINGS.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
|