Instructions for Installation and Use
Aquarius FDW60 & FDW65
60cm free standing
Dishwasher
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Contents
Electrical Connection
For Your Safety
Installation
Before Using your Dishwasher
Loading your Dishwasher
What Can I Was
4
5
6-7
8-9
10
10
Getting to know your Dishwasher
How to use your Dishwasher
Programme Chart
11
12
13
Care and Cleaning
Troubleshooting
14
15-21
Information for Test Labs
After Sales Service
Hotpoint Guarantee
Notes
22
23
24
25-26-27
Back Cover
Key Contacts
Retention of this Instruction Book
This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of the
appliance.
If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is also
provided so the new owner can become familiar with the appliance and safety warnings.
If the Book is lost or damaged a copy may be obtained from:
MerloniElettrodomesticiUKLtd.MorleyWay,Peterborough,PE29JB
3
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Electrical Connection
WARNING:Thisappliancemustbeearthed.
Fuses
Safety Information
Your appliance comes fitted with a plug and a 13A fuse. If you need to
replace the fuse, only those rated at 13A and ASTA approved to
BS1362 should be used. If you lose the fuse cover, a replacement
may be obtained from your local authorised Service Centre or
Electrical company. Correct replacement is identified by colour coding
or the marking on base of plug.
At the time of delivery...
All functions of your dishwasher have been thoroughly tested at the
factory. A small number of water marks may have been left as a
result, they will disappear when the appliance is used for the first time.
WARNING:Thedishwashermustnotbeconnectedtotheelectricity
supply while installation is being carried out.
WARNING: DO NOT use the plug unless the fuse cover is fitted.
-
This appliance should only be connected to a 230/240V AC
source, via a properly installed earthed socket.
Use the dishwasher solely in a domestic environment.
DO NOT stand or place heavy objects on the door when it is
open, this could damage the door or cause the appliance to tip
forward.
Changing the Plug
Cut off and dispose of the supplied plug if it does not fit your socket.
-
-
WARNING:ToavoidashockhazardDONOTinsertthediscardedplug
into a socket anywhere else.
IMPORTANT:WIRESINTHEMAINSLEADARECOLOUREDIN
ACCORDANCEWITHTHEFOLLOWINGCODE:
If your family includes children...
Green/Yellow
Blue
-
-
-
Earth
Neutral
Live
-
DO NOT allow children to play with the appliance or tamper
with its controls.
Brown
-
Keep detergents and rinse aids away from children. Keep
children away from the open door of a dishwasher, there could
still be some detergent left inside.
If you change the plug, the colour of the wires in the mains lead may
not correspond with the terminal markings in the plug, which if not
coloured, could be:
EARTH
NEUTRAL
LIVE
‘E’ or
‘N’
‘L’
CAUTION:
Changing the Mains Lead
The dishwasher meets the requirements set out by the regulations in
force concerning safety and electrical equipment.
Any technical checks should be conducted exclusively by a trained
and authorised technician: Repairs carried out by unaithorised
persons will invalidate the guarantee, as well as posing a potential
hazard to the user.
A lead can be ordered from Hotpoint Service
UK: 08709 066 066 or
Republic of Ireland: 1850 302 220
If you have damaged the existing lead or require a longer one a
charge will be made. It is strongly advised that this work is carried out
by a qualified electrician.
The manufacturer declines all responsibility for damage to persons or
property resulting from failure to observe the above precautions, from
tampering with even a single component or from the use of non-
original spare parts.
If the domestic wiring includes a residual current-operated circuit
breaker, ensure that it conforms to the latest regulations.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
For your Safety
Thismanualformsanintegralpartoftheappliance. Itmustalwaysbekepthandyforreference. Readthroughalltheinstructionscontainedinthismanual
beforeusingthedishwasher.
Installation must be performed by a qualified technician, in compliance with the regulations in force, including the prevention and elimination of
radio frequency interference.
The dishwasher is designed for washing and drying dishes, any
other use shall be considered improper. The manufacturer declines
all responsibility for uses other than those described above.
7. DO NOT install outdoors, not even if the area is covered by a roof: it is
1. Seperate the various packaging materials and dispose of safely - DO
extremely dangerous to leave it exposed to rain and thunderstorms.
NOT leave discarded packaging material around the home.
8. Ifinstalledonacarpetedorcoveredfloor, ensurethattheopeningson
2. After removing the packaging, check to make sure your appliance is
the underside are not obstructed.
intact. If in doubt, contact a qualified professional.
9. Donottouchtheheatingelementduringorstraightafterawashcycle.
3. DO NOT use extension leads and multiple plugs. If the electricity supply
10. If the appliance malfunctions, turn off the water inlet tap and
wire is not long enough, then have it replaced with one of the correct
length and remember that it should be free of bends or dangerous kinks.
4. In the event of any damage to the power cord have it replaced by a
disconnect the plug from the wall socket. Then read the section
entitled "Troubleshooting". If you cannot resolve the problem, then
call Hotpoint Service (see KEY CONTACTS, back page).
qualified technician.
11. Cutlery and sharp utensils should always be inserted in random
5. The mains plug must be easily accessible after installation.
order with the blades pointing downwards (take care with knife
6. Iftheapplianceisnotoperatingproperlyorifmaintenanceoperationsare
blades).
necessary, disconnect the dishwasher from the mains power supply
12. For your own safety ensure the door is closed when the dishwasher
(unplug it!).
is in use.
The rating plate, featuring the technical data, serial number and
markings, is visibly positioned on the inner edge of the door.
DO NOT remove the rating plate.
The dishwasher is intended for use by adults. DO NOT allow children
1. DO NOT use solvents, such as alcohol or turpentine which may
to come near or play with the controls.
cause an explosion.
2. DO NOT load dishes to wash that are soiled with ash, wax or paints
Keep children away from detergents and clear of the dishwasher
.
door when open.
3. DO NOT lean, sit or stand on any part of the dishwasher - this could
cause injury and/or damage the appliance.
Keep all packaging material away from children.
4. DO NOT drink any water residues from inside the dishwasher.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Installation
Cold water connection.
Drainhoseconnection.
Choose where you want to install
your dishwasher, you can place it
so that its sides or back panel are
side by side with furniture or up
againstthewall. Thedishwasheris
providedwithwatersupplyanddrain
hoses, which can be directed
towards the left or right to facilitate
appropriateinstallation.
SinkWasteSystem:
Forundersinkdrainage:
Connect the cold water supply
hose, inserting the small filter
supplied with the dishwasher and
makingsurethatitisfastenedtightly
in place (see figure 2). If the water
hosesareneworhavebeenoutof
useforanextendedperiodoftime,
let the water run to make sure it is
clear and free of impurities before
making the connection. If this
precaution is not taken, the water
inlet could get blocked, causing
damagetoyourdishwasher.
WARNING: Connect your
dishwasher drain hose to pipes
which connect to the foul drain
system and not to surface water
drains.
IMPORTANT: For the correct
operation of your dishwasher, it is
essentialtocomplywiththefollowing
information:-
Before connecting the drain hose,
remove any internal restrictions -
Thiswillpreventabuildupofdebris
whichcouldcauseablockage.
Remove any restrictions from the
waste spigot and ensure that the
sealingbungisremoved. Thehose
should be routed, such that it is
raised to a minimum height of
800mm(31/2”).
Levelling.
Standpipe:
Ensurethatthehoseisnotpushed
toofardownthestandpipe.
Iftheendofyourdrainhoseisfitted
with‘retainingflaps’,ensuretheyare
insertedfullyintothestandpipe. This
will prevent the pipe from jumping
out during installation and use.
Once the appliance is positioned,
adjustthefeetbyscrewingthemin
or out depending on how high you
want it and to level it so that it is
horizontal. Make sure that it is not
inclinedmorethan2degrees. Ifthe
applianceislevel, itwill helpensure
itscorrectoperation.
HeightAdjustment
A
Insert the appliance into the cutout
andthenadjusttheheightusingthe
screwslocatedonthefrontbottom
part of the machine. Use a
screwdriver to turn the screws in
the clockwise or anti-clockwise
direction to increase or decrease
theheightrespectively.
NOTE: Ensure the sink outlet
pipe has a minimum diamtere of
32mm.
Fig.2
DO NOT position the standpipe
near an electrical outlet.
ENSUREthatthedrainhoseisnot
kinked and it is routed as shown in
thediagram.
1. Untie the end of the GREY
drainage hose from the rear of
the appliance.
2. Reposition the ‘Hooked End
Support’ as required along the
GREYdrainagehose.
The standpipe should have a bore
of at least 38mm (11/2”). It should
be installed as shown, have a trap
fitted and must discharge into the
same drain system as your
household sink.
3. If fitting an under sink waste
disposal unit, cut out the
membrane, bung or blanking
plug.
It MUST NOT be connected to a
surfacewaterdrain.
4. Attach the GREY drainage
hose to the under sink waste
disposal unit securely, using the
clip and rubber tube supplied.
Ensure the drain hose is
securely attached, to prevent
it coming away while the
machine is in use and causing
a flood.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
1
2
3
4
5
INSTRUCTIONS FOR INSTALLING THE DISHWASHER IN
FULLY-FITTED KITCHENS.
Your freestandingdishwasher canbeinstalledinmodernkitchensasfollows:
l to stand next to furniture units or other electric household appliances
(Pleasereadthechapteron “Installation”intheinstructionmanual.)
l to insert or built-in under the one worktop.
Shoulditbenecessarytoremovethetopshelfofthedishwasher,proceedasfollows:
–Unscrewthe2rearscrewsandthen, withalightpushforward, letitslideoutandremoveit(seefig.1)
–Discardthepolystyrenerectangle.
–Openthedoorand, afterunscrewingthefixingscrews, removethe3plasticplugsusedtohooktheshelfon(fig. 2)
–Glueonthesmallsoundproofingadhesivespongystripontothetopcrosspiece(photo3)and,aftertiltingtheappliance,glue
onanotheroneunderneaththebase(photo4).
–Straightenuptheapplianceandadjustthefrontandbackfeetbyunscrewingtheminananti-clockwisedirectiontoraisethe
dishwashertotherequiredheight.
–Inserttheapplianceunderneaththeworktop(fig.5),checkingthattheinletandoutletpipesdonotgetbentorsquashed (please
readtheinstructionsprovidedinthe“Installation”chapter).
–Openthedishwasherdoorandglueonthetwoequal-sizedadhesivespongystripsonthefrontedgeoftheappliancecabinet.
Beginfromthetopwithoutleavingoutanyspacesandmakesurethestripsadhereallalongthelengthoftheedge.Asmallpart
ofthespongystripprotrudingontotheoutsidewillblockanylightleftbetweenthedishwasherandadjacentcabinets, thus
improvingthesoundproofing.
Warning:
Thedishwasherplugmustbewithinaccessoncetheappliancehasbeenbuiltin,inordertoallowformaintenancetobecarried
outsafely.
Thestructureofyourdishwashermakesitimpossibletofititunderahob.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Before Using your Dishwasher
B
C
The detergent
Addingdetergent
D
•
•
Use the right amount of detergent
(seeprogrammechart).
Store your detergent and rinse aid
in a cool, dry place, safely away
from children.
ToopenlidA, pressbuttonB.
Thedetergentshouldbeputintothe
twocontainersCandD.
If using a tablet, put it in container
"D".
25 gr
.
5 gr.
Now you can close the lid: press it
down until you hear it click.
If it won't close
Check whether there is any
detergent residue on the edges of
thedispenser. Removetheexcess.
A
We recommend Glist 3 in 1 for use in all Hotpoint dishwashers...
Brilliant cleaning is guaranteed with Glist 3 in 1.
Hotpoint only recommends Glist 3 in 1 Dishwasher tablets to give outstanding cleaning and
care.
It is important to use detergent specially designed for domestic dishwashers. (Always follow the
manufacturers instructions.)
Glist3in1 advanceddishwashertabletswithactiveenzymesaretheidealwaytoprotectandcarefor
your dishwasher, while getting your dishes and glasses sparking clean.
SofterWater:
Built in salt action softens water, helping to prevent the build up of limescale in the dishwasher and
improve the cleaning result*.
CleanerDishes:
With unique active enzymes in the cleaning phase Glist 3 in 1 breaks down even the hard to shift
foodstuffsandgrease, leavingthedishesspotlessandthedishwashercleantoo.
SparklingResults:
*If you live in an area particularly
prone to very hard water ( 35
Glist and Hotpoint recommend
that you continue to keep your
dishwasher salt topped up.
°f)
The built-in Glist rinse agent ensures the dishes and glasses are free from water marks and smears.
If you have any questions regardingGlist3in1, please contact the hotline on 0800 216 730.
Rinse aid.
Rinse aid makes dishes sparkle
moreasitimprovestheirdrying.The
rinseaidcontainerissituatedonthe
insideofthedoor.
Youshouldfilltherinseaidcontainer
when indicator D lights up on the
container (see right) and the rinse
aidindicatorlight "T"onthecontrol
panelflashes.
- The amount of rinse aid
needs to be increased if the
dishes appear dull or you can
see circular stains.
- The amount of rinse aid
needs to be reduced if the
dishes are sticky or you can
see white streaks.
F
C
Addingrinseaid.
To open the dispenser, turn cap C
anticlockwise. Takecarewhenyou
pour in the rinse aid to avoid it
overflowing. You can regulate the
amount of rinse aid used by the
dishwasher, move the adjuster F
whichyouwillfindunderlid C.
You can choose from six different positions.
Itisnormallysetto4.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Before Using your Dishwasher
Water hardness varies according
to where you live. If the water in
your home is hard, without water
softening, incrustations would
form on your dishes. Your
dishwasher is fitted with a water
softener which uses special salt to
get rid of limescale in the water.
Water Hardness
Salt
Autono-
my
(cycles\2-
kg)
consu-
mption
(grams/-
cycle)
Clarke
Selector
position
°fH
mmol/l
degrees
Adjusting the water softener.
Your dishwasher can adjust its salt
consumptionaccordingtothehard-
ness of the water in your home.
This way, you can optimise and
customise your dishwasher's salt
consumption.
0 - 14
0 - 17
0 -1,7
/
0
/
14 - 36 18 - 44 1,8 - 4,4
36 - 71 45 - 89 4,5 - 8,9
"-"
20
40
60
60
40
25
MED
"+"
To adjust salt consumption, do as
follows:
>71
> 89
> 8,9
1. Unscrew the salt container cap
2. There is an arrow on the neck
of the container (see figure): if
necessary, turn the arrow anti-
clockwise from the "-" setting
to the "+" setting.
Select the arrow position
depending on the water
hardness, referring to the table.
IMPORTANT:
You don't know how hard the water
in your home is? Ask the company
that supplies water in your area.
Only use recommend dishwasher
salt DO NOT use everyday table
salt, cooking salt as they contain
insoluble substances which could
harm your dishwasher.
Salt
Filling the salt container.
Always use salt which is intended for dishwasher use.
The salt container is situated underneath the lower basket, fill it up as
follows:
1.Pull out the lower basket completely, unscrew and remove the
container cap
2. If it is the first time you add the salt, first fill the container up with
water (you won't have to do this again next time)
3. Put the dishwasher funnel on the hole and pour in approximately
two kilos of salt. It is normal that some water comes out of the
container.
4. Screw the cap back in place carefully.
When to add salt:
WARNING:
DO NOT pour detergent into the special salt container - This will
destroy the water softener.
The salt container should be filled up when the low salt indicator light
“S” flashes.
The dishwasher will remind you to do so for five consecutive wash
cycles.
IMPORTANT NOTICE:
3 in 1 dishwasher tablets are now available. These combine detergent, salt and rinse aid ALL IN ONE. If the water in your area is hard or very
hard, we still recommend you add salt to the salt container to prevent white streaks on your dishes and in the dishwashers interior.
Add rinse aid to the dispenser, only if you are dissatisfied with the results.
In all cases, please read the manufacturers instructions on the packet.
If you are only using the 3 in 1 products, after a number of cycles it is normal for the salt and rinse aid indicator lights toflash permanently.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Loading your Dishwasher
Load examples
- Especially long utensils
should be placed in the
horizontal position at the
front of the upper rack.
Before placing the dishes in
the dishwasher, remove the
larger food particles to
prevent the filter from
becoming clogged, which
results in reduced perfor-
mance.
Bottom Rack
Top Rack
How to Use the Upper Rack
The upper rack is designed
to hold more delicate and
lighter dishware, such as
glasses, coffee and tea
cups and saucers, as well
as plates, small bowls and
shallow pans (as long as
they are not too dirty).
- Position the dishes and
cookware so that they do
not get moved by the spray
of water.
If the pots and pans have
baked-on food that is
extremely hard to remove,
we recommend that they be
allowed to soak before they
are washed. This will elimi-
nate the need for extra wash
cycles.
Pull out the racks to facili-
tate loading the dishwasher.
How to Use the Lower
Rack
How to adjust the Upper
rack ...
We recommend that you
place the most difficult to
clean items on the bottom
rack: pots, pans, lids,
serving dishes and bowls,
as shown in the figure to the
right.
It is preferable to place
serving dishes and lids on
the sides of the racks in
order to avoid blocking the
rotation of the top spray arm.
- Pots, serving bowls, etc.
must always be placed top
down.
The top rack can be adjusted
using the two rack heights
(top and bottom). To adjust
the rack, open up the tabs
that lock the guides and pull
out the rack. Arrange the rack
with the back wheels in either
the top or bottom position and
then insert it along the guides
until the front wheels are on
as well. Close the tabs to lock
the rack in place (see Fig. F).
A
1
2
4
- Deep pots should be
slanted to allow the water to
flow out.
3
Fig. F
-This basket is equipped
with two removable grids:
insert the cutlery one by one
into the slots; knives and
utensils with sharp blades or
tips should be positioned
with the sharp parts at the
bottom. Position all cutlery
items so that they don't
touch.
If the rack has side baskets,
the spoons should be loaded
individually into the
appropriate slots (see fig.
A).
What can I Wash
Items not suitable for the dishwasher:
•
•
•
Cutleryandtablewaremadefromwoodorpartwood-Theymaybecomefadedandunsightlyinappearance.
Avoid washing horn handled and bronze cutlery in the machine.
Delicate/decorative glassware and vases, special antique or irreplaceable china - the decorative patterns
printed on these items will not be dishwasher proof.
Plastic objects that are not resistant to hot water.
Copper and Pewter utensils. Aluminium and Sliver objects.
Some types of glass can become opaque in appearance after they have been washed too many times in a
dishwasher.
•
•
•
•
•
Highly absorbent materials such as sponges and towels should never be placed in a dishwasher.
If in any doubt, check with the manufacturer on items suitability for dishwasher’s.
WARNING:Dishesorcutlerysoiledwithtobaccoash, wax, lubricatinggreaseorpaintshouldnotbeput
inthedishwasher.
Ourrecommendation:Infuture,onlypurchasetableorkitchenwarethathasbeenconfirmed-dishwasher
proof.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Getting to know your
Dishwasher
M
E
G
F
E. Upperbasket
J. Salt container cap
K. Washingfilter
H
F. Top spray arm
G. Basket height adjuster
H. Lower basket
J
L. Detergent and rinse aid
K
dispenser
I
M. Turbo dry fan
I. Bottom spray arm
L
The Controls
.
S. Low Salt indicator light
This light warns you that it is time
to add more salt.
T. Low Rinse Aid indicator light
This light warns you that it is time
to add more rinse aid.
H. Half load indicator light
R. Start / Reset button
WithStartthewashcyclebegins,
whereas a;; the settings are
cleared with Reset.
A. ON-OFF Button
Thislightinformsyouthatthehalf
load is selected.
Press this button to switch the
appliance on.
P. Cycle select button
B. ON-OFF Indicator light
This light informs you that the
dishwasher is on.
Each time this button is pressed,
one of the cycle indicator lights
“E” will come on in sequence
C. Door opening handle
Use this handle to open the door.
D. Delayed start select button
This button delays the start of
the wash cycle you selected
by 12, 9, 6 or 3 hours.
E. Cycle indicator light
This light informs you which cycle
you have selected or the one in
progress.
F. Half load selection button
To allow you to wash a half load in
the upper basket.
G. Cycle phase and delayed start
indicator lights
Thes indicator lights inform you
which cycle phase is underway
(prewash,wash,rinses,drying).
If you have set a delayed start, they
also indicate the amount of time left
until the wash cycle starts.
Thisdishwasherconformstothe
followingEuropeanCommunity
Directives:
7HFKQLFDOꢀ FKDUDFWHULVWLFV
Width
cm. 60
cm. 60
Depth
• 73/23/EECof19/02/73(Low
Voltage)andsubsequent
modifications;
Height
cm. 85
• 89/336/EECof03/05/89
(Electromagnetic
Capacity
12 standard place settings
Compatibility)andsubsequent
modifications
Mains water pressure
Power voltage
Total absorber power
Fuse
4,3 psi - 145 psi (30 KPa÷ 1MPa) (0,3 ÷10 bar)
See data plate
See data plate
See data plate
• 97/17/CE
(Labelling)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
How to use your Dishwasher
You've left out a dish?
Interrupt the wash cycle by press-
ing the On-Off button "A", then
insertthedishyouhadforgotten.
When you shut the door, press the
On-Off button again. The cycle will
startupfromwhereyouinterrupted
it.
First of all.
- Turn on the water supply
tap completely.
- Add the correct amount
of detergent.
- Load the baskets
correctly.
- Check that the spray
arms rotate freely.
- Close the door securely.
Delaying the start of a
programme.
Whenyouhaveloadedthedishes,
youcanchoosewhentostartyour
dishwasherbeforesettingthewash
cycledesired.
Pressbutton"D"todelaythestart
of the wash cycle by 12, 9, 6 or 3
hours. Eachtimeyoupressit, you
willhearashortbeepandindicator
light "G" corresponding to the
selecteddelaywillcomeon.
Selectthedesiredwashcycle.
PresstheStartbutton,youhearthe
beep,thecountdowntothedelayed
startwillbegin.
If, forexample, youhaveseta12
hourdelay,onceyouhaveselected
awashcyclethe12hourindicator
lightwillflash...followedbytheothers
insequenceuntilthesettimedelay
isup. Theindicatorlightswillkeep
you informed of the countdown
progressatalltimes.
Half load.
Yourdishwasheralsoallowsyouto
wash half a load, to save water ,
electricityanddetergent(useonly
halftheamount).
Beforesettingawashcycle,press
button "F", indicator light "H" will
comeon.
NOTE:Whensetthedishwasher
willwashontheupperbasketonly.
Cycle end
The end of the wash cycle is indi-
cated by 2 short beeps and the
flashing ofthedryingphaseindica-
torlight.
Turn the appliance off by pressing
the On-Off button “A”, thus switch-
ing off the electricity supply.
Turn off the water tap.
Wait a few minutes before unload-
ing the dishes: they are very hot! If
youwaitalittlewhile, theydrybetter
due tothesteam.
To see the settings you
have selected
-
Press the ON-OFF button "A":
you will hear a short beep and indi-
cator light "B" comes on.
Yourapplianceisnowonandawait-
ing instructions.
At any time, when the cycle is
underway, ifyoupressbutton"F",
thecycleinprogressindicatorlight
will light up for a few seconds...
followedbythehalfloadindicatorlight
ifset.
Select the wash cycle.
Select the wash cycle by pressing
button "P". Each time this button is
pressed,abeepwillsoundandindi-
cator lights “E” will come on in
sequence.Select the wash cycle
mostsuitableforthetypeofdishes
towash(see‘Programme Chart’).
Close the door and press the Start
buttonafterafewseconds, youwill
hearashortbeepandthewashcy-
clewillstarted.
Emptythelowerbasketfirst.
Oncethistimeisup, indicatorlight
"G"willstopflashingandthewash
cyclewillbegin.
For your own safety,
ensure the door is closed
when the dishwasher is
not in use.
There's been a power
failure or you opened the
dishwasher door
The wash cycle stops and then
restartswhentheelectricitycomes
backonorwhenyouclosethedoor.
If you change your mind and you
wishtosetadifferentdelay,justopen
thedoor,pressbutton"D",youneed
notresetthewashcycle.
Ifyouwanttocancelthedelayset
andyouwishtostartthewashcycle
immediately, press button "D"
repeatedlyuntilthecyclestartsand
indicatorlight"G"correspondingto
thecyclestartphasecomeson.
The dishwasher informs
you.
Yourdishwasherhasindicatorlights
"G" which light up to indicate the
washcyclephasethatisunderway.
Modifying a wash cycle in
progress.
Ifyouhavechosenthewrongcycle
- You can modify the wash cycle in
progress, if it has only just started.
KeeptheResetbutton"R"pressed
in for approximately 5 seconds, a
prolongedbeepwillsound,followed
by three short beeps.
Cycle phase and delayed
start indicator light "G"
(1)
Flashing to indicate a
delayedstart,toremindyouthatyou
have set a delayed start.
(2)
On, litconstantly, eachlight
shows which stage of the wash
cycle is in progress.
Indicator light "G" will go out to
showallthesettingswillhavebeen
cancelled. You are now free to re-
set the correct wash cycle.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Programme Chart
Select the most suitable programme for the type of dishes and how dirty they are. To select the wash
programme see the chart below:
CYCLE
CYCLE SELECTION
INSTRUCTIONS
CYCLE
DESCRIPTION
DETERGENT RINSE WASH CYCLE
FOR PRE-
AID
DURATION
in minutes
(Tolerance
±10%)
WASH & WASH
Very dirty dishes and pans
(NOT to be used for delicate
items)
Pre-wash with hot water at 40°C
Extended wash at 65°C
2 cold rinses
Hot rinse at 65°C
Drying
INTENSIVE
5 + 25 g
30 g
120
72
*
Cycle for normally dirty pans and Wash at 55°C
dishes.
Standard daily cycle.
NORMAL
ECO
Cold rinse
Hot rinse at 70°C
Drying
*
*
Environmentally friendly cycle,
with low energy consumption
levels, suitable for normally dirty Hot rinse at 65°C
2 cold pre-washes
Wash at 45°C
5 + 25g
130
pans and dishes.
Drying
Economic and fast cycle to be
used for slightly dirty dishes.
FAST
Short wash at 40°C
Run cycle immediately after use. Hot rinse at 62°C
25g
25
12
Preliminary wash cycle for dishes Short cold wash to prevent food
PRE-WASH
while awaiting completion of the
load with the dishes from the next
meal.
from drying onto the dishes.
Special cycle to be used for more Wash at 50°C
delicate items which are sensitive Rrinse at 45°C
DELICATES
25g
96
to high temperatures.
Run cycle immediately after use. Drying
Hot rinse at 65°C
*
To optimise wash performance and save on energy, try to use the dishwasher with a full wash load. If it takes some time to fill your
dishwasher, use the pre-wash to avoid caked on food and build up of bad odours.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Care and Cleaning
DO NOT use solvents or
abrasivestocleantheexteriorand
rubberpartsofyourappliance, do
not use solvents or abrasive
cleaning products. Use a cloth
dampenedwithlukewarmsoapy
wateronly.
Ifthereareanystainsonthesurface
oftheapplianceinterior,useacloth
dampened with water and a little
whitevinegar,oracleaningproduct
specificallymadefordishwashers.
Cleaning the spray arms.
Going away
Unplug the appliance.
Ifthedishwasherisnotgoingtobe
usedforsometime, carryoutthe
following:
Beforecarryingoutanycleaningor Food residue may become
maintenanceonthedishwasher, encrustedontothesprayarmsand
always remove the plug from the blocktheholeswherewatercomes
out.Checkthesprayarmsregularly
andcleanthemonceinawhile.
• run a cycle with the dishwasher
empty.
• switchoffattheelectricalsocket
andunplug.
• turn off the water supply tap,
disconnect the inlet hose and
allowtodrain.
•filltherinseaiddispenser.
•leavethedoorajar,topreventthe
buildupofunpleasantodours
insidethedishwasher.
electricitysocket.
After every wash.
Whenthewashcyclehasended,
always remember to turn off the
watersupplytapandtoleavethe
appliance door ajar. This way,
moistureandbadodourswillnotbe
trappedinside.
The filter assembly
• Ifyouwantconsistentgoodresults
fromyourdishwasher,youneedto
cleanthefilterassembly.
• Removethelargerfoodparticles
trappedinsidethecup“C”andthe
semi-circular filter A after each
wash;pullthecuphandleupwards
to remove them. Just rinse them
underrunningwater.
• Theentirefilterassemblyshould
becleanedthoroughlyonceamonth:
cup C + semi-circular filter A +
cylindrical filter B. Rotate filter “B”
anticlockwisetoremoveit.
Cleaning the Water Inlet
Filter
Beforeusingthedishwasheraftera
longbreak,pluginandswitchonat
theelectricalsocket.Reconnectthe
inlet hose and turn on the water
supply tap. Check there are no
deposits of rust inside the water
pipe,ifthereareallowwatertorun
from the supply tap for a few
minutes.
Periodicallycleanthewaterinletfilter
(see figure 2 under "Installation")
located on the outlet of the water
supplytap.Afterturningoffthewater
tap, unscrewtheendofthewater
supplyhose, removethefilterand
cleanitcarefullyunderrunningwater.
Then,returnthefiltertoitsplaceand
tightenthewatersupplyhoseback
intoposition.
Disconnecting
dishwasher.
the
Whendisconnectingthedishwasher
itisimportantthattasksarecarried
outinthecorrectsequence.
•switchoffatthemainsandremove
theplugfromthesocket.
• turnoffthewatersupply.
• disconnectdrainandwaterinlet
hose.
For cleaning, use a non metallic The seals.
brush.
One of the factors that cause
unpleasantodourstoforminsidethe
dishwasher is food that remains
trapped in the seals. Periodic
cleaningusingadampspongewill
preventthisfromoccurring.
1
A
B
2
• pulloutthedishwasher,carefully,
withdrawinghosesatthesame
time.
C
Moving the appliance.
Drainwaterfromthedishwasher.
Secure all loose parts. Only
transportinanuprightposition.
•Ifnotkeptuprightduringtransport,
anywaterremaininginsidemay
seepintothecontrolmoduleand
causesubsequenterrorswith
programmefunctions.
Reassemble the filter parts (as
showninthefigure)andreinsertthe
whole assembly into the
dishwasher. Position it into its
housingandpressdownwards.
Thedishwasherisnottobeused
withoutfilters.Improperreplacement
of the filters may reduce the
efficiency of the wash and even
damageyourdishwasher.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Troubleshooting
In the unlikely event that you have problems with your machine, the following guide will
enable you to resolve many problems without having to call out a service engineer.
Cause/How to resolve…
Fault Area
Issue
The Dishwasher Will Not
Start
PossibleInstallation/Electrical
SupplyFault
Check
- Isthedishwasherpluggedinandswitchedon?
- Isthereapowerfailure, checktoseeifotherappliancesworking.
- Checkthefuse.
(Particularly if the machine
is being used for the first
time)
- Isthereafaultwiththewatersupply/isthewatersupplytapturnedon?
- Isthewaterpressuresupplysufficient?
- Istheinlethosekinked?
-Isthedoorclosedproperly?
Cycle phase indicator
Cliygchlets flashing:
IIfadelayedstarthasbeenselectedthenthecyclephaseindicatorlight
correspondingtothelenghtoftimedelayedwillflash.
- Hastimedelaybeenselected?
For example:-
Pre wash flashing
Wash
- 3hr Delay Set
- 6hr Delay Set
- 9hr Delay Set
-12hr delay Set
Rinse
Drying
Follow the instructions below to cancel:-
Step 1: Press the “Delay Start” Button until all light are out.
Step2:Selectwashprogrammeasnormal.
DelayStart
Button
Please Note: The “Drying” light will also flash to indicate
the end of a programme. (See “Cycle Phase Indicator Lights
Flashing”below).
TheSaltrefilllightwillflashwhenyourdishwasherisswitchedonforthe
firsttimeandagainwhenthesaltlevelsbecomelow-followtheinstructions
on “Before Using Your Dishwasher” page on how to add salt to your
dishwasher.
Salt Refill Light Flashing/ Salt refill light will flash if:-
Not Going Out When Salt -SYouareusingtheMachine for
Added
the first time
Or
- The salt level is low
PleaseNote:
- The salt refill light will remain lit after the salt has been
added for several consecutive cycles.
- If you are using 3 in 1 tablets and do not add salt then
the salt refill light will flash periodically for several
consecutive cycle.
- If 3 in 1 dishwasher tablets are used we still recommend
the
dishes.
that you add salt to prevent limescale deposits on your
15
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Fault Area
Cause/How to resolve…
Issue
TheRinseAidlightwillflashwhenyourdishwasherisswitchedonfor
thefirsttimeandagainwhentherinseaidlevelsbecomelow-followthe
instructionson“BeforeUsingYourDishwasher“pageon howtoadd
rinseaid..
Rinse Aid Light Flashing/
Rinse Aid light will flash if:-
Not Going Out When Rinse -SYouareusingtheMachine for
Aid Added
the first time.
Or
- The rinse aid level is low.
Please Note:
-
The rinse aid light will remain lit after the rinse aid
has been added, and will continue to flash until the
machine has completed the next full wash cycle
(Note: The Fast & Prewash cycles are not full wash
cycles).
-
If you are using 3 in 1 tablets (or 2 in 1) and do not
add rinse aid then the rinse aid light will flash
continuously.
PossibleIncorrectFitmentofWater
InletHosePossi
Leaking From Rear Of
Machineeaking
ChCheck
Isthewaterinlethoseconnectionsecuredatrearofmachine(Fig1)
andhasfilterwasher(A)beenfitted(Fig2)?
Machine Connection
Tap Connection
Filter washer (A) can be
found with the Instruction
Bookwhenthemachine is
delivered. Fil
F
Fig.1
Fig.2
Your dishwasher is designed so that if a fault occurs, an error message indicated by one
or two wash cycle indicator lights flashing rapidly.
Cycle Indicator Lights
FlashingC
Inmanycasesyoucanrectifytheseerrorsbyfollowinginstructionsinthissection.
Ifhowevertheerrorsindicatedonyourmachinearenotlisted, youwillneedtocontactyourServiceCentre
forassistance.
See “Key Contacts” on the back page of the instruction book.
- Turnonthewatertapandthedishwasherwillstartafterafew
Short beeps sounding for
minutes.
a few minutes when starting
programme.
-Watertapturnedoff
16
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Fault Area
Issue
Cause/How to resolve…
Wash cycle indicators lights 4 If you are not at your dishwasher when the short beeps
& 5 flashing (Fast & Prewash). sound, the dishwasher will switch to alarm mode and
indicator lights 4 & 5 (Fast & Prewash) will flash.
Followtheinstructionsbelowtocancel:
- Watertapturnedoff
Step 1:
Turnthedishwasheroffbypressingthe“On/Off”button.
Step 2:
Turnonthewatertap
Step 3:
Indicators 4&5
(Fast & Prewash)
Wait approximately 20 seconds and then switch the appliance on by
pressingthe“On/Off”button.
Step 4:
Selectwashprogrammeasnormal.
Please Note:
If the above does not solve the problem, check that the
water feed pipe filter is not blocked.
Ifwashcycleindicatorlights3&5(Eco&Prewash)areflashing, then
youneedtoclearthefilterofanyblockagesbeforeprogrammecanproceed.
Wash cycle indicator lights
3&5 flashing (Eco& Prewash).
Step1:Pressthe“On/OffButton”, toturnoffyourdishwasher.
- Possible Filter Blockage
Step2:Removefilterfrombaseofmachine(Fig.1)
Step 3: Rinse filters under running water and ensure that large food
particlesareremovedfromAreaA(Fig.2).
Step 4: Locate filters back into the filter housing and firmly press
downwards.
In Indicators 3 & 5
(Eco & Prewash)dicators
Step 5:Turn the dishwasher on by pressing the “On/Off” button, and
selectrequiredprogramme.
$
Fig.1
Fig.2
For additional advice on Cleaning your filter see “Care
and Cleaning”section of the instruction book.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Issue
Cause/How to resolve…
Fault Area
Ifindicatorlight4(Fast)flashesrapidly,TURNthedishwasherOFFAND
BACKON againafter oneminute. Ifthealarmpersists, firstturnoffthe
watertaptoavoidanyfloodingandthencutofftheelectricitysupplyand
callfortechnicalassistance.
Wash Cycle indicator
light 4 flashing (Fast).
- Waterloadsolenoidvalve
malfunctionalarm.
Indicator4
(Fast)
“Drying” light flash-
-Indicatesandofprogramme
Cycle Phase Indicator
Lights Flashing
The“Drying”phaseindicatorlightwillflashinthedisplaytoindicatethe
programmeiscomplete.
-Pressthe“On/Off”buttontoswitchoffthedishwasher.
Please Note:
When your dishwasher is switched back on, the “Drying”
phase indicator light will continue to flash ntil a new
programme is selected or the machine is reset - This is
normal.
Thisisnormal-TheRinseLight, ratherthanthePrewashlightilluminates
becausePrewashisbasicallya“ColdRinse”cycle. (i.e. themachineis
usingpartoftherinsecycletogivethePrewashfunction).
When a“Pre-Wash”programme
isselected, the“Rinse”lightwill
illuminate.
-
-
-
-
Istheselectedprogrammesuitableforthetypeofloadandthe
degree of soiling?
ResidueOnDishesWhenWash
CycleComplete.
Poor Wash Results
Checktheloadingofyourcrockeryintothebaskets(See“Loading
YouDishwasher”Sectionoftheinstructionbook).
Checkthatthefiltersarecleanandinplace(See“Careand
Cleaning” Section of the instruction book.)
Isthelidofthesaltcontainerclosedproperly?
-
Istherinseaiddosagecorrect?
(Seesection“PoorDryingResults”belowforinstructionsonadding
or adjusting rinse aid to your wash).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Cause/How to resolve…
Fault Area
Issue
TabletNotDissolving
Whereverpossiblethefollowingshouldbepositionedawayfrom
dispenser, toensurethattheycannotcomeintocontactwiththe
Dispenser.
- Cutlery/CutleryBasket
- Crockery
- CasserolesDishes/PansEtc.
Poor Wash Results
SprayarmObstruction
Upper
Basket
Upper
Spray
Arm
- Priortostartingtheprogrammeensurethespraywashjetholesare
notblockedandalsothatthesprayarmscanrotatefreely.
21 cm
Spray wash jet
26 cm
26 cm
holes
31 cm
Withtheupperbasketinthelower
position, the maximum height for
platesis26cm.
Withtheupperbasketintheupper
position, the maximum height for
platesisincreasedto31cm.
Toadjusttheupperbasketposition,followinstructionbelow:-
Step1:Pushthewhitestoppersatthefrontofthebasketshelvesoutwards
andremovethebasket(Seefig.1&Fig. 2).
Step2:Pushthebasketrunnersbackintothedishwasherwiththestoppers
stillpointingoutward(SeeFig.3)
Step 3: Select required position, if lower position selected top wheel
wouldglideintothebasketrunners(SeeFig.4)andifupperpositionrequired
bottomwheelwillbeinrunners(Fig.5)
)LJꢀꢁ
)LJꢀꢅ
)LJꢀꢄ
)LJꢀꢃ
)LJꢀꢂ
- There is no drying cycle on the Fast Wash Programme.
FastWashProgrammeSelected
Poor Drying Results
19
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
Issue
Cause/How to resolve…
Fault Area
Poor Drying Results
Is Rinse Aid being used or is the
RinseAidlevelsettoolow?
Using rinse aid in your wash will improve the drying performance.
To add rinse aid to your wash follow instructions below:
Step 1: Rotate cap anti-clockwise and pull to remove.
Step2:Pourrinseaidintocontainerandsecurecapbackintoposition.
&DS
The level of rinse aid used during your wash cycle can be adjusted to
ensurebestresults.
Rinse Aid Levels 1 (lowest) to 6 (Highest)
Rinse Aid level adjuster is located under
dispenser cap. Using small coin rotate
adjustertodesiredsetting.
(Werecommendsettingto4).
RinseAidAdjuster
PossibleInstallationFault
(Particularlyifthemachineisbeing
usedforthefirsttime)
The Dishwasher Will Not
Drain
Check
- Isthedrainhosekinked?
- Isthesinktrapblocked?(Ifthisisthecaseyouwillexperience
problemswhityoursinkdrainage).
- Ensuretheblankingplug/closedendconnector hasbeenremoved
ifconnectedtoasinktrap(thisisthemostcommonfaultwheninstalling
adishwasher).
Ensure drain
hose is not
kinked
Remove blanking
plug/closed end
Note:
Therearetwotypesofsinktrap
drainhoseconnection.
connection from
sink trap.
1. Closedendconnection:
Which must be cut off.
2. Blankingpluginthesinktrap
connections:
Which must be removed.
Which must be removed.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
UnusualAmountoffoamiscreated
Hasthecorrectdetergentbeenused?(UseonlyDishwasherpowder
or tablets).
General
Haveyouspiltrinseaidwhenfilltherinseaidcompartment?Ifyes,
this will clear on the next cycle.
DishwasherStoppingDuring
Cycle
Hastherebeenapowerfailure,checkotherappliances?
Yourdishwasherwillstopandstartthroughoutthewashprogramme.
This is normal.
Hasthewatersupplybeeninterrupted?
Knocking Noise coming from
Dishwasher
Sprayarmknockingagainstdishes(See“LoadingYourDishwasher”
Sectionoftheinstructionbook).
Crockeyhasnotbeenstackedcorrectly.
KnockingNoiseComingfromInlet
Valves
Thisiscausedbythewayyouhavethewaterpipeslaidandhasno
effectuponthedishwasherfunctions.
Ifyourcoldwatermainspressureissettoohigh, thenoiselevelwill
be increased.
If you have completed all of the above checks and your appliances is still not operating, then please call your
Service Centre for assistance.
See “Key Contacts” on the back page of the instruction book.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
INFORMATION FOR TEST LABS
Load for 12 Standard Settings tests (upper basket at top position)
upper basket
lower basket
3
12
12
B
C
4
A
i
h
1
k
e
e
D
e
2
9
g
A
C
g
f
g
C
g
5
6
9
1
3
3
2
L o w e r b a s k e t
U p p e r b a s k e t
Typ e
Ite m
D ia m e te r Vo lu m
(a p p rox im a te ly)
Ty p e
Ite m
D ia m e te r/Vo lu m
(a p p roxim a te ly )
so u p e p la te
d in n e r p la te
2 3 c m .
2 6 c m .
cu p
0 ,2 0 l.
A
B
e
f
s e rv in g
b ow l
1 9 c m .
2 5 0 m l.
d e ss e rt
p la te
1 9 cm .
3 5 cm .
g la ss
C
D
g
ova l p la tte r
s a u ce r
1 4 c m .
1 3 c m .
h
k
s e rv in g
b ow l
s e rv in g
b ow l
1 6 c m .
i
Loading the detergent
The cleaning detergent should be introduced into the two containers
“Comp.2” and “Comp.3” (see table at the end of the page).
Loading the Rinse Aid
The amount of rinse aid used for each cycle can be regulated by
turning the dose adjuster ‘F’ which you will find under lid ‘C’.There
are 6 different settings; the normal dosage is setting 5.
8
7
2
5
3
1
6
4
5
D
5
5
5
5
5
5
5
5
5
Comp.2
Comp.3
This basket is
equipped with two
removable grids:
insertthecutleryone
by one into the slots,
with the handles at
the bottom. Position
themsothattheydon't
touch.
F
5
3
3
3
3
3
5
3
3
3
3
3
3
7
3
4
7
1
1
1
1
1 1
1 1
4
1
1 1
4
1
8
6
C
4
2
4
4
4
4
4
4
2
2
4
4
2 2 2
2
2
2
2
2 2
door side
Cycle
Total detergent
30 gr.
Comp.2
Comp.3
Eco
25
5
EN 50242
IEC/ DIN
Eco + extra dry
30 gr.
30
*
Press the “extra dry” button (depending on Model).
*
Don’t press the “extra dry” button only, for free-standing dishwashers with “turbo-dry” fan, see features in the ‘Getting to Know
Your Dishwasher’ section of this instruction book.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales Service
"No company is better positioned to offer an after sales service on a
Hotpoint appliance than us - the manufacturer"
As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive
parts and labour guarantee for the first 12 months. In addition to this you also have the advantage of
free replacement parts for the first 5 years when fitted by a Hotpoint engineer. When the 12
months parts and labour guarantee expires we offer the following after sales service options:
Repair Service and Information Help Desk
UK: 08709 066066
Republic of Ireland: 1850 302 200
Note: Our operators will require the Model number and the Serial number of your appliance
Available 364 days a year with a fast, effective and value for money service. We have the largest
white goods repair service in the UK with over 900 of our own fully trained engineers. All repairs
include a parts and labour guarantee for 12 months from the date of the repair.
If you require any information or have any questions about your appliance, our operators are on
hand with help and advice.
All this ensures that you will receive the best available after sales service possible.
Extended Warranties
UK: 08709 088 088
Republic of Ireland: 1850 502 200
Whether you have just one or a number of Hotpoint appliances in your kitchen, we offer two service
cover plans to give you total peace of mind.
l Repair Protection Plan
-
FREE service repairs for a single Hotpoint appliance during the
period of cover.
l Kitchen Cover
-
FREE service repairs for all your Hotpoint appliances less than 8
years old.
Genuine Parts and AccessoriesUK: 08709 077 077
Republic of Ireland: (01) 842 6836
A wide range of genuine parts and accessories are available from our hotline or through our web
site.
Genuine parts and accessories, extended warranties and service repairs are all
available on our web-site at:
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee
"Satisfaction guaranteed or your money back"
We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have
purchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair
for an engineer to call. If the technical problem is not resolved under this guarantee, we will
replace your machine or, if you prefer, give you your money back.
All Hotpoint appliances carry a fully inclusive 12 month parts and labour guarantee as well as free
replacement parts for the first 5 years (except microwaves, selected integrated appliances and
cooker hoods, which have a one year guarantee) provided that they are fitted by a Hotpoint
engineer.
Guarantee terms and conditions
Your guarantee is only applicable in the United Kingdom or Republic of Ireland and is subject to
the following provisions that your appliance:
l
l
Has been installed and used correctly in accordance with this instruction booklet.
Has been used solely for domestic purposes and is located on domestic premises (ie. not
for commercial or trade use).
l
l
Has been properly connected to a suitable electrical supply voltage as stated on the
appliance rating plate.
Has not been subject to misuse, accident, modified or repaired by anyone other than one of
our own service engineers.
For pre purchase information on any other Hotpoint product call: 08701 50 60 70
Recycling & Disposal Information
As part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the right
to use quality recycled components to keep down customer costs and minimise material wastage.
Please dispose of packaging and old appliances carefully.
To minimise risk of injury to children, remove the door, plug and cut mains cable off flush with the
appliance. Dispose of these parts separately to ensure that the appliance can no longer be
plugged into a mains socket and the door cannot be locked shut.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
NOTES
25
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
NOTES
26
Download from Www.Somanuals.com. All Manuals Search And Download.
D ISHWASHER
NOTES
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Contacts
After Sales Service
Over 900 trained specialists, directly employed by us, ensure that you can have complete confidence in
both the appliances and services we offer.
Repair Service and Information Desk
UK: 08709 066 066
(Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays)
Republic of Ireland: 1850 302 200
Note: Our operators will require the following information:
Model number:
Serial number:
Extended Warranties
UK: 08709 088 088
(Open 8 to 8 Mon - Sun)
Republic of Ireland: 1850 502 200
Genuine Parts and Accessories
UK: 08709 077 077
(Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat)
Republic of Ireland: (01) 842 6836
Merloni Elettrodomestici UK Ltd. Morley Way, Peterborough, PE2 9JB
195044418.00
May 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
|