Honeywell Thermostat CT3500 User Manual

Honeywell CT3500/CT3595  
PROGRAMMABLE THERMOSTAT  
OWNER’S GUIDE  
Weekday, Saturday and Sunday  
Programmable Heat and/or Cool  
Low Voltage (20 to 30 Vac) Thermostat and Wallplate  
Model CT3500/CT3595  
Para pedir estas instrucciones en español, llame al 1-800-468-1502.  
Pour obtenir ce ode demploi en français, composer le 1-800-468-1502.  
Table of Contents  
Step 1. Prepare for Installation................................................................................................................................................  
Step 2. Remove Old Thermostat.............................................................................................................................................  
Step 3. Mount Thermostat Wallplate.......................................................................................................................................  
Step 4. Wire Wallplate Terminals ............................................................................................................................................  
Step 5. Install the Batteries.....................................................................................................................................................  
5
6
7
8
9
Step 6. Set Fan Operation Switch........................................................................................................................................... 10  
Step 7. Mount the Thermostat ................................................................................................................................................ 11  
Step 8. Customize Your Thermostat ....................................................................................................................................... 11  
Step 9. Set the Clock .............................................................................................................................................................. 13  
Step 10. Programming............................................................................................................................................................ 14  
Step 11. Operating Your Thermostat....................................................................................................................................... 17  
Step 12. Set the Fan and System Switches............................................................................................................................ 18  
If You Have a Problem............................................................................................................................................................ 19  
Smart Response™ Technology .............................................................................................................................................. 21  
Wiring Diagrams ..................................................................................................................................................................... 22  
® U.S. Registered Trademark  
© 2004 Honeywell International Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
All Rights Reserved  
69-1199—4  
DIGITAL DISPLAY  
RAISES TEMPERATURE  
SETTING  
SET CURRENT  
DAY/TIME  
SETS CURRENT  
TIME AND DAY  
LOWERS TEMPERATURE  
SETTING  
DISPLAYS CURRENT  
HEAT/COOL  
TEMPERATURE SETTING  
RUN PROGRAM  
RETURNS  
THERMOSTAT  
TO NORMAL  
OPERATING MODE  
Time  
Set Program  
Leave  
PROGRAM PERIODS  
WAKE/LEAVE/RETURN/SLEEP:  
ENTERS PROGRAMMING MODE  
Set Current  
Day/Time  
Run  
Program  
Wake  
Return  
Sleep  
Heat  
Off  
Cool  
Heat/Cool  
Settings  
Hold Temp  
Day  
System  
HOLD TEMP  
SETS A HOLD  
TEMPERATURE  
AND ACTIVATES  
VACATION HOLD  
FEATURE.  
On  
Auto  
SYSTEM SWITCH  
SELECTS HEAT/OFF/COOL  
Fan  
FAN SWITCH  
SELECTS AUTO/ON  
DAY  
SETS DAY OF  
THE WEEK  
HEAT/COOL SETTING  
SWITCHES BETWEEN  
HEAT SETPOINTS AND  
COOL SETPOINTS  
WHILE PROGRAMMING  
M18589  
TIME /TIME  
SETS TIME FORWARD OR BACK  
3
69-1199—4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISPLAYS EITHER CURRENT  
TIME OF DAY OR PROGRAM TIMES  
SHOWS THERMOSTAT IS IN  
THE SET DAY/TIME MODE  
SHOWS WHEN  
THERMOSTAT IS IN THE  
PROGRAMMING MODE  
SHOWS TEMPERATURE SETTING  
CHANGED FOR THIS PROGRAM PERIOD  
SHOWS VACATION  
HOLD DURATION  
SHOWS THE TEMPERATURE  
DISPLAYED IS THE CURRENT  
SET TEMPERATURE  
Temporary Setting  
Set Program  
Set Day/Time  
Hold for  
SHOWS CURRENT  
DAY OR DAYS BEING  
PROGRAMMED  
AM  
Em Ht  
Room  
Humid  
SHOWS THE TEMPERATURE  
DISPLAYED IS THE CURRENT  
ROOM TEMPERATURE  
Aux Ht  
MonTueWedThuFriSatSun Days  
WakeLeaveReturnSleep  
System  
Outdoor  
Repl Batt  
In Recovery Filter  
SHOWS CURRENT  
PROGRAM PERIOD  
OR PERIOD BEING  
PROGRAMMED  
SHOWS THE BATTERIES ARE  
LOW AND MUST BE  
REPLACED  
Off Cool  
Auto  
Wait  
Em  
Heat  
SHOWS CURRENT  
SYSTEM SWITCH POSITION  
HEAT/OFF/COOL  
DISPLAYS EITHER ROOM  
OR SET TEMPERATURES  
SHOWS THAT THERMOSTAT IS  
SHOWS SMART RESPONSE IS OFF  
CONVENTIONAL RECOVERY IS ON  
SHOWS SMART RESPONSE IS  
CHANGING THE TEMPERATURE  
TO MEET THE CURRENT PROGRAMS  
M18590  
INFORMATION AND WAITING TO CALL FOR HEAT OR COOL  
69-1199—4  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 1. PREPARE FOR INSTALLATION  
q
Check Table 1, the compatibility chart, to make sure the thermostat is compatible with your system. If your system  
is not compatible, call Honeywell Customer Care, toll-free, 1-800-468-1502.  
Table 1. Compatibility Chart.  
System Type  
Compatibility with CT3500/CT3595  
Yes  
Gas — Standing Pilot  
Gas — Electronic Ignition  
Gas-fired Boilers  
Yes  
Yesa  
Gas — 750 Millivolt Heat Onlyb  
Oil-Fired Boilers  
Yes  
Yesa  
Yes  
Yes  
Yes  
No  
Oil-Fired Furnace  
Electric Furnace  
Electric Air Conditioning  
Baseboard Electric (120/240 line volt)c  
Single Stage Heat Pump  
Yes  
No  
Multistage Heat Pumps/Multistage Equipment  
a Compatible with 2-wire Honeywell and Taco zone valves. Not compatible with 3-wire zone valves or 2-wire White  
Rodgers no. 1361 zone valves.  
b Millivolt system must be heating only.  
c
Not compatible with any 120/240 volt system.  
Package Contents  
Thermostat  
Wallplate  
Owners manual  
Screws and anchors  
Wiring labels  
Tools Required  
Screwdriver  
Drill  
5
69-1199—4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 2. REMOVE OLD THERMOSTAT  
q
Test your heating and cooling systems to make sure they work properly. If either system does not work, contact  
your local heating/air-conditioning dealer. To avoid compressor damage, do not operate the cooling system when  
outdoor temperature is below 50°F (10°C).  
q
q
q
Turn off power to the system at the furnace or the fuse/circuit breaker panel.  
Carefully unpack your new thermostat and wallplate. Save package of screws, instructions, and receipt.  
Remove the cover from the old thermostat. If the cover does not snap off when pulled firmly from the bottom, check  
for a screw or screws used to lock on the cover.  
q
q
Loosen the screw or screws holding the thermostat to the wallplate and lift the thermostat away.  
Disconnect the wires from the old thermostat. As you disconnect each wire, attach the enclosed labels with the old  
terminal designation. If there are only two wires, they do not need to be labeled. Wrap the wires around a pencil as  
shown to keep them from falling back into the wall.  
Special Installations  
WIRES THROUGH  
WALL OPENING  
Read this section if you are replacing:  
Clock thermostat with separate wires for the clock.  
Thermostat with six or more wires connected to it.  
Thermostat in a heating only system with three wires.  
M5136  
Replacing a Clock Thermostat that has C or C1 Clock Terminals  
If you are replacing a Honeywell Chronotherm® Thermostat, you may find one or two  
wires going to the C or C1 clock terminals on the Chronotherm wiring wallplate. Do not allow them to touch, or you can  
damage the transformer. Disconnect the wires and wrap them separately using electrical tape. Do not wrap them  
together. Place the wires where they will not interfere with the operation of the new thermostat. Record the colors and  
terminal designation labels of the remaining wires.  
Replacing a Thermostat that has Six or More Wires  
If there are six or more wires (excluding clock wires attached to terminals), you probably have a variation of a  
multistage heat pump or other multistage system. This thermostat is not compatible with multistage systems, so return  
the product to the place of purchase. For information about which programmable thermostats will work with your  
system, call Honeywell Customer Care at 1-800-468-1502.  
69-1199—4  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Replacing a Thermostat that has Three Wires  
If you have three wires for a heating only system and can operate the fan using the fan ON switch this thermostat  
works with your system. However, some hot water (zoned) heating systems also have three wires. Your thermostat will  
work only if you install an isolating relay on these systems. For details, call your local heating and/or cooling contractor.  
STEP 3. MOUNT THERMOSTAT WALLPLATE  
q
Separate the wallplate from the thermostat by placing your thumb or fingers between  
the bottom of the wallplate and the thermostat, and pulling the wallplate up and away  
from the thermostat. See illustration at right.  
q
Position the wallplate on the wall. Level the wallplate for appearance if desired. Use a  
pencil to mark the two mounting holes that best fit the application.  
M16427  
q
q
Remove the wallplate from the wall. Drill two 3/16 in. holes in wall  
(if drywall) as shown. For materials such as plaster or wood, drill  
7/32 in. holes where marked. Gently, tap the (provided) anchors  
into the drilled holes until they are flush with the wall.  
Reposition the wallplate over the holes. Pull the wires through the  
WALL  
WIRES  
THROUGH WALL  
wiring opening. Loosely insert mounting screws into each of the  
holes.  
WALL  
ANCHORS (2)  
q
q
Level the wallplate if desired. Thermostat functions properly when  
not level.  
Tighten mounting screws.  
MOUNTING  
HOLES  
MOUNTING  
SCREWS  
M15044  
7
69-1199—4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 4. WIRE WALLPLATE TERMINALS  
IMPORTANT  
All wiring must comply with local codes and ordinances. If unsure about household wiring procedures, call  
your local heating/air-conditioning contractor.  
Refer to the labels you placed on the wires when you removed the  
old thermostat (see illustration).  
q
Match the letter of your old thermostat wire with the  
corresponding terminal letter on your new thermostat. Refer to  
Table 2.  
q
Remove the factory-installed jumper connecting terminals R and  
RC if wires are connected to both of those terminals.  
For wiring diagrams, if needed, see pages 22-23.  
Loosen the terminal screws. Slip each wire beneath its matching  
terminal. Wraparound and straight connections are both  
acceptable, (see illustration). Tighten the terminals.  
q
q
FOR WRAPAROUND  
INSERTION STRIP  
7/16 IN. (11 MM).  
FOR STRAIGHT INSERTION  
STRIP 5/16 IN. (8 MM).  
M4826  
q
Plug the hole in the wall with insulation to help prevent drafts  
from adversely affecting thermostat operation.  
M16425  
69-1199—4  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table 2. Terminal Designations on Old and New Thermostats.  
Terminal on Old Thermostat Connect To Description  
R, RHa, 4, V  
R
Power  
Rc, Ra  
Rc  
W
Power for cooling  
Heat  
W, W1, H  
Y, Y1, M  
G, F  
Y
Cooling  
G
O
Fan  
O
Changeover in cool. (Single stage heat pump only).  
Changeover in heat. (Single stage heat pump only).  
Transformer common  
Bb  
Bb  
Cc, Xc, Bb  
W2, H2  
Do not connect.  
Do not continue installation. Second stage heat.  
Call 1-800-468-1502.  
Y2  
Second stage cool.  
a If both RH and R terminals are present on existing thermostat, remove jumper and connect Rh to R and R to Rc.  
b Do not connect both O and B when wiring to a single stage heat pump. Connect O to O. Tape off B.  
c
Tape off end of the wire with electrical tape and push the taped wire back into the wiring hole in the wall.  
STEP 5. INSTALL THE BATTERIES  
W
ALLPLATE  
B
R
IMPORTANT  
Three fresh AA alkaline batteries must be installed for pro-  
gramming and operation of the thermostat and the heat-  
ing/cooling system.  
RC  
O
W
Y
G
q
Install the batteries in the wallplate so the positive terminals all  
point up (see illustration).  
INSTALL 3 AA ALKALINE BATTERIES  
AS SHOWN, POSITIVE (+) TERMINALS  
TOWARD TOP.  
M10622  
9
69-1199—4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
q
If the thermostat is already mounted on the wall, remove the  
thermostat by placing your thumb between the thermostat and  
wallplate and pulling the thermostat up and away as shown.  
When the batteries are running low, a REPL BAT message flashes  
for one to two months before the batteries run out completely.  
Replace the batteries as soon as possible once the message  
flashes.  
IMPORTANT  
Although the thermostat has a low battery indicator,  
replace the batteries once per year to prevent leakage  
and to prevent the thermostat and heating/cooling sys-  
tem from shutting down due to lack of battery power in  
the thermostat.  
M16424  
If you insert new batteries within 20 to 30 seconds of removing the  
old batteries, the system retains the current time and day. If the  
display is blank, the batteries are dead or installed incorrectly. You must reset the time and day. Refer to Set the Clock  
for instructions.  
As a precaution when leaving home for longer than a month, change batteries before leaving to prevent  
the system from shutting down due to lack of power. Always use fresh alkaline batteries. Nonalkaline  
batteries do not last as long. They also can leak, causing damage to the thermostat and the wall  
surface.  
STEP 6. SET FAN OPERATION SWITCH  
The thermostat fan operation switch, labeled FUEL SWITCH is factory set  
in the F position. This is the correct setting for most systems. If your  
system is an electric heat system, set the switch to E. The E setting allows  
the fan to turn on immediately with the heating or cooling in a system  
where the G terminal is connected.  
M12676  
FUEL SWITCH  
69-1199—4  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 7. MOUNT THE THERMOSTAT  
A
.
ENGAGE TABS AT TOP  
B
.
PRESS LOWER  
OF THERMOSTAT  
AND WALLPLATE.  
EDGE OF CASE  
TO LATCH.  
M12703A  
STEP 8. CUSTOMIZE YOUR THERMOSTAT  
Your Honeywell thermostat comes preset to the most commonly used settings. The settings are:  
— Gas or oil forced air furnace.  
— Smart Response technology on.  
Temperature °F.  
— 12-hour clock format.  
You can change any or all of these settings.  
IMPORTANT  
Always press the keys with your fingertip or a similar blunt tool. Sharp instruments like pens and pencil  
points can damage the keyboard.  
q
Press and hold down  
You now can change any of these settings.  
,
, and , simultaneously until the screen shows.  
OPTION  
FEATURE  
NUMBER  
M13330  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
69-1199—4  
System Type (Feature Number 4)  
System type options are:  
— 1 = Gravity or steam system.  
— 3 = Hot water, high efficiency furnace (90% or better), or single stage heat pump.  
— 6 = Gas or oil forced air furnace (preset).  
— 9 = Electric furnace.  
To change your system type:  
q
q
Press  
until display shows your furnace or boiler type.  
Run  
Program  
Press Time  
to move to next feature or  
to return to main display.  
Smart Response™ Technology (Feature Number 13)  
Smart Response technology options are:  
— 0 = Smart Response technology on (preset).  
— 1 = Smart Response technology off.  
M13343  
To turn Smart Response technology on or off:  
q
q
Press  
once.  
Run  
Program  
Press Time  
to move to next feature or  
to return to main display.  
NOTE: See Smart Response technology (page 21) for information about this feature.  
Temperature Format (Feature Number 14)  
Temperature format options are:  
— 0 = °F (preset).  
— 1 = °C.  
M13344  
To change temperature format:  
q
q
Press  
once.  
Run  
Program  
Press Time  
to move to next feature or  
to return to main display.  
69-1199—4  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Time Format (Feature Number 16)  
Time format options are:  
— 0 = 12-hour clock (preset).  
— 1 = 24-hour clock.  
M13345  
To change time format:  
q
q
Press  
Press  
once.  
Run  
Program  
to return to main display.  
Factory Set Function (Feature Number 37)  
Do not change this setting.  
M13346  
STEP 9. SET THE CLOCK  
Set Current Day and Time  
NOTE: On initial power-up, the screen flashes 1:00 pm until you press a key.  
Set Curent  
Day/Time  
q
q
q
Press  
Press  
.
Day  
until screen shows current day.  
or until screen shows current time. (Tapping the  
Set Curent  
Day/Time  
Press time  
will advance the time in one hour  
increments).  
Run  
Program  
q
Press  
.
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
69-1199—4  
STEP 10. PROGRAMMING  
The keyboard is located behind the thermostat cover. The three most frequently used keys are near the display.  
Pressing  
displays the current temperature settings. Pressing the  
and  
keys change the temperature. The  
thermostat displays day, time, program period, temperature and system settings.  
There is an individual key for each of the four program periods:  
—The program period when you want the house at a comfortable temperature when you get up and while you  
get ready for work or school. (This is a higher temperature during the heating season and a lower  
temperature during the cooling season).  
—The program period you can set for an energy-saving temperature while you are away at work or school.  
(This is a lower temperature during the heating season and a higher temperature during the cooling  
season).  
Wake  
Leave  
—The program period when you want the house at a comfortable temperature for activities before bedtime.  
(This is a higher temperature during the heating season and a lower temperature during the cooling  
season).  
—The program period you can set for an energy-saving temperature while you are sleeping. (This is a lower  
temperature during the heating season and a higher temperature during the cooling season).  
Return  
Sleep  
Table 3 can be helpful when planning your schedule for time and temperature settings. The thermostat  
preprogrammed settings are shown in parentheses ( ).  
69-1199—4  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table 3. Personal Programming Table.  
Default Setting Weekday (Mon-Fri) Saturday (Sat)  
Period  
Wake  
Sunday (Sun)  
Time (6:00AM)  
Heata (70°F/21°C)  
Coolb (78°F/25.5°C)  
Time (8:00AM)  
Leave  
Return  
Sleep  
Heata (62°F/16.5°C)  
Coolb (85°F/29.5°C)  
Time (6:00PM)  
Heata (70°F/21°C)  
Coolb (78°F/25.5°C)  
Time (10:00PM)  
Heata (62°F/16.5°C)  
Coolb (82°F/28°C)  
a Your heating setpoints cannot be higher than 90°F (32°C) or lower than 40°F (4.5°C).  
b Your cooling setpoints cannot be higher than 99°F (35°C) or lower than 45°F (7°C).  
Program Weekdays  
Start by programming the wake time and temperature for weekdays.  
Wake  
q
q
q
Press and release  
Day  
.
Press  
until (Mon-Fri) displays.  
or key until the desired time shows in the display.  
Press Time  
NOTE: Program times are in 15 minute intervals. For example, 8:00, 8:15, 8:30.  
q
Press  
or  
key until the desired wake temperature displays.  
15  
69-1199—4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The setpoint temperature range is 40°F to 90°F (5°C to 2°C) for heating and 45°F to 99°F (7°C to 37°C) for cooling.  
Heat/Cool  
Settings  
q
Press  
to switch between heating and cooling setpoints.  
NOTE: Program times are the same for heating and cooling.  
q
q
Press  
Press  
or  
until the display shows the desired temperature setpoint.  
Sleep  
Leave  
Return  
,
or  
and repeat these steps for each time period. Your weekday is now programmed.  
Program Saturday and Sunday  
Repeat each step in Program Weekdays for Saturday and Sunday.  
Run  
Program  
q
Press  
when the entire week is programmed.  
Clear a Program Period  
NOTE: Wake cannot be cleared.  
Leave  
Sleep  
Return  
q
q
q
q
q
Press  
Press  
,
, or  
for the program period you want to clear.  
Day  
until the desired day displays (Mon-Fri Sat; Sun).  
Leave  
Return  
Sleep  
Press and hold the  
,
, or  
for approximately 3 seconds until the time and temperature clear.  
Repeat the above steps for each period to be cleared.  
Run  
Program  
Press  
.
69-1199—4  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 11. OPERATING YOUR THERMOSTAT  
Change Temperature Setting Until the Next Program Period (Temporary Change)  
q
Press  
or  
until the screen shows the desired temperature setting.  
NOTE: The temporary temperature setting is displayed for about 3 seconds and then the room temperature is  
displayed. Temporary appears in the display. The setting cancels when the next program period starts or  
Run  
Program  
when you press  
.
Change Temperature Setting Indefinitely (Hold)  
q
Move the System switch to the desired position (Heat or Cool).  
Hold Temp  
q
Press  
then  
or  
to change your setting if desired. (The display changes from showing the setpoint  
temperature to room temperature after approximately three seconds).  
Run  
Program  
q
To cancel “Hold” press  
.
Change the Temperature Setting Until a Designated Day and Period (Vacation Hold)  
Hold Temp  
q
q
q
q
Press  
Press  
twice.  
until the display shows the desired temperature setpoint.  
until the desired number of days that you will be away (1 through 255) is displayed.  
or  
Press Time  
Wake  
Return  
Sleep  
Leave  
Press  
,
,
or  
to select the program period when you want the program to restart.  
Run  
Program  
NOTE: If the Vacation Hold needs to be cancelled before the designated time, press  
program.  
to return to the  
17  
69-1199—4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 12. SET THE FAN AND SYSTEM SWITCHES  
First set the fan switch. Fan On: The fan runs continuously. Use for improved air  
circulation or for more efficient central air cleaning. (In a  
heat-only system, fan runs continuously only if fan relay is  
connected to the G thermostat terminal).  
On  
Fan  
Auto  
Auto  
Fan Auto: Normal setting for most homes. The equipment  
controls the fan operation.  
On  
Fan  
Then set the system  
switch.  
Heat: The thermostat controls your heating system.  
Off: Both the heating and air conditioning systems are off.  
Cool: The thermostat controls your air conditioning system.  
Heat  
System  
Off  
Cool  
Cool  
Cool  
Heat  
System  
Off  
Off  
Heat  
System  
69-1199—4  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IF YOU HAVE A PROBLEM  
Table 4. Solution Guide.  
If...  
Then…  
Display does not appear.  
Make sure the batteries are fresh and installed correctly.  
Make sure the thermostat is mounted and latched on the wallplate.  
Mount and latch the thermostat on the wallplate if it is not.  
Temperature settings will not change  
(example; cannot set the heating higher  
or the cooling lower).  
Make sure the temperature setpoints are:  
—40°F to 90°F (4.5°C to 32°C) for heating.  
—45°F to 99°F (7°C to 35°C) for cooling.  
Heating does not come on.  
Make sure the heating setpoint is above the room temperature.  
Make sure the circuit breaker is not tripped, and reset it if necessary.  
Make sure the power switch at the equipment is in the On position, and  
set it to On if it is in the Off position.  
Wait five minutes for the system to respond.  
Set the system switch to Heat.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
69-1199—4  
Table 4. Solution Guide.  
If...  
Then…  
Cooling does not come on.  
Make sure the cooling setpoint is below the room temperature.  
Make sure the circuit breaker is not tripped, and reset it if necessary.  
Make sure the system switch at the air conditioner is in the On position,  
and set it to On if it is in the Off position.  
Wait five minutes for the system to respond.  
Set the system switch to Cool.  
System on indicator ( = heat,  
cool) is lit, but no warm or cool air is  
coming from the registers.  
=
Wait five minutes after seeing the flame or snowflake and check the  
registers again. If no there is no hot or cool air coming from the registers,  
refer to Heating does not come on or Cooling does not come on. If all of this  
has been checked, contact your local heating and cooling contractor.  
Display flashes during programming.  
Temperature setting limit has been reached. The heating setting range is  
40°F to 90°F (4.5°C to 32°C). The cooling setting range is 45°F to 99°F  
(7°C to 35°C).  
Temperature changes occur at the  
wrong times.  
Check the program times for the period in question.  
Make sure the AM and PM settings are correct.  
Make sure the current time and day settings are correct.  
Reprogram any incorrect settings.  
NOTE: If your thermostat is set for Smart Response™ technology, the  
start times occur before your programmed comfort period.  
Toll-Free Customer Assistance  
Please read and follow the provided instructions for this thermostat. For additional information, go to  
Before calling, please have the following information available:  
Thermostat model number. (Located on back of thermostat).  
Thermostat date code. (Located below model number).  
Type of heating/cooling system (for example, hot water, warm air, oil, or gas).  
Location and number of wires connected to the thermostat.  
69-1199—4  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SMART RESPONSE™ TECHNOLOGY  
Your thermostat is actually a small computer. The Smart Response technology calculates the correct time of day to  
turn on your heating or cooling system. Smart Response technology considers the following information.  
Air temperature.  
Wall temperature.  
The time of day when you want the comfort temperature established.  
When the thermostat activates Smart  
Response technology, the thermostat  
displays In Recovery, changes the  
setpoint, and turns on the system.  
System Operating  
in Comfort Mode  
AM  
Room  
68 F  
66 F  
Mon  
Wake  
System  
Heat  
Recovery  
Continues  
AM  
Room  
Your thermostat learns from  
Mon  
Heat  
Sleep In Recovery  
System  
Heat  
experience. Each day it checks how  
closely it hit the recovery target and  
then adjusts the next days recovery  
start time accordingly.  
It takes a few days after installation for  
the thermostat to adjust to the local  
weather, your lifestyle, the  
construction of your home, and your  
heating/cooling system.  
You can turn off Smart Response  
technology by selecting Conventional  
Recovery. See Step 8. Customize  
Your Thermostat.  
Recovery  
Begins  
1
AM  
Room  
64 F  
62 F  
Mon  
Heat  
Sleep In Recovery  
System  
Heat  
System Operating in  
Energy Savings Mode  
AM  
Room  
Mon  
Sleep  
System  
Heat  
5:00  
5:30  
6:00  
6:30  
ENERGY  
SAVINGS  
PERIOD  
COMFORT  
PERIOD  
RECOVERY FROM ENERGY SAVINGS  
TIME  
THERMOSTAT USES THE SAME SCHEME TO RETURN TO LOWER COMFORT TEMPERATURE DURING  
THE COOLING SEASON.  
M18591  
1
IF In Recovery IS DISPLAYED, PRESS  
TO SEE THE COMFORT SETPOINT.  
21  
69-1199—4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WIRING DIAGRAMS  
4
-
U
WI  
M
R
E
PE  
H
R
EAT/COOL  
I
2-  
WI  
RE  
H
EAT-ONLY  
(J  
N
T
ACT)  
(
JUM  
PE  
R
IN  
TACT)  
THERMOSTAT  
B
THERMOSTAT  
B
RC  
O
W
Y
RC  
O
W
Y
R
G
R
G
HEATING  
RELAY OR  
VALVE COIL  
HEATING  
RELAY OR  
VALVE COIL  
COOLING  
CONTACTOR  
COIL  
FAN  
RELAY  
1
1
1
POWER SUPPLY. PROVIDE  
DISCONNECT MEANS AND  
OVERLOAD PROTECTION AS REQUIRED.  
1
POWER SUPPLY.  
PROVIDE DISCONNECT MEANS  
AND OVERLOAD PROTECTION AS REQUIRED.  
M10616  
M10617  
4
-WIR  
E SI  
N
GLE-ST  
PE  
A
GE  
T
HEAT PUMP  
ACT)  
(J  
U
M
R
I
N
3
-WIR  
E
H
E
M
A
T O  
PE  
N
R
LY WIT  
T
H
ACT)  
FAN  
(J  
U
I
N
THERMOSTAT  
B
THERMOSTAT  
B
RC  
O
W
Y
R
G
RC  
O
W
Y
R
G
3
2
HEAT  
CHANGEOVER  
VALVE  
COMPRESSOR  
CONTACTOR  
HEATING  
FAN  
RELAY  
2
RELAY OR  
1
VALVE COIL  
COOL  
CHANGEOVER  
VALVE  
1
FAN  
RELAY  
1
POWER SUPPLY. PROVIDE  
DISCONNECT MEANS AND  
OVERLOAD PROTECTION AS REQUIRED.  
M10618  
POWER SUPPLY. PROVIDE DISCONNECT MEANS  
AND OVERLOAD PROTECTION AS REQUIRED.  
1
2
3
USE EITHER O OR B FOR HEAT PUMP CHANGEOVER.  
USING A JUMPER WIRE (NOT SUPPLIED) CONNECT  
W TO Y.  
M12739  
69-1199—4  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
-
U
WI  
M
R
E
PER R  
H
E
A
E
T/  
M
C
OOL  
OVED  
5
-WIR  
E
H
E
A
U
T/  
M
C
OOL WITH DA  
N
MPER  
(J  
)
(J  
PER I TAC  
T)  
THERMOSTAT  
B
THERMOSTAT  
B
RC  
O
W
Y
RC  
O
W
Y
R
G
R
G
HEAT  
DAMPER  
HEATING  
RELAY OR  
VALVE COIL  
HEAT  
RELAY  
COMPRESSOR  
CONTACTOR  
FAN  
RELAY  
COOLING  
CONTACTOR  
COIL  
1
1
COOL  
DAMPER  
FAN  
RELAY  
1
1
POWER SUPPLY. PROVIDE  
DISCONNECT MEANS AND OVERLOAD  
M10619  
1
POWER SUPPLY. PROVIDE  
DISCONNECT MEANS AND  
OVERLOAD PROTECTION  
AS REQUIRED.  
PROTECTION AS REQUIRED.  
M18738  
Notice:  
This thermostat is a Class B digital apparatus that complies with Canadian Radio Interference Regulations,  
CRC c. 1374.  
23  
69-1199—4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited One-Year Warranty  
Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use  
and service, for a period of one (1) year from the date of purchase by the consumer. If, at any time during the warranty period,  
the product is defective or malfunctions, Honeywell shall repair or replace it (at Honeywells option) within a reasonable period  
of time.  
If the product is defective,  
(i)  
return it, with a bill of sale or other dated proof of purchase, to the retailer from which you purchased it, or  
(ii) package it carefully, along with proof of purchase (including date of purchase) and a short description of the malfunction,  
and mail it, postage prepaid, to the following address:  
Honeywell International Inc. USA  
Dock 4 — MN10-3860  
Honeywell Canada:  
Honeywell Limited/Honeywell Limitée  
35 Dynamic Drive  
1885 Douglas Drive North  
Golden Valley, MN 55422-3992  
Scarborough, Ontario M1V 4Z9  
This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the  
defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer.  
Honeywells sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL  
NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL  
DAMAGES RESULTING, DIRECTLY OR INDIRECTLY FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED,  
OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or  
consequential damages, so this limitation may not apply to you.  
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF  
ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not  
allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.  
This warranty gives you specific legal rights, and you may have other rights which vary from state to state.  
If you have any questions concerning this warranty, please write Honeywell Customer Care, 1885 Douglas Drive North,  
Golden Valley, MN 55422-3992, or call 1-800-468-1502. In Canada, write Retail Products ON30 Honeywell Limited/Honeywell  
Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.  
Automation and Control Solutions  
Honeywell International Inc. Honeywell Limited-Honeywell Limitée  
1985 Douglas Drive North  
Golden Valley, MN 55422  
35 Dynamic Drive  
Scarborough, Ontario  
M1V 4Z9  
69-1199—4 J.S. Rev. 10-04  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Microwave Oven 9120 User Manual
Grizzly Switch H8242 User Manual
HandHeld Entertainment Scanner Quick Check 890 User Manual
Hasbro Games Men in Black User Manual
Hearth and Home Technologies Indoor Fireplace WHB30 User Manual
Hotpoint Dishwasher HDA3200FAA User Manual
HP Hewlett Packard Personal Computer vl800 User Manual
HP Hewlett Packard Washer Dryer 4278A User Manual
Hypertec Carrying Case N6198KHY User Manual
Ikelite Digital Camera IXUS 980 IS User Manual