Healthrider Home Gym HRCR48960 User Manual

Model No. HRCR4896.0  
Serial No.  
USER'S MANUAL  
The serial number is found in the  
location shown below. Write the  
serial number in the space above.  
Serial  
Number  
Decal  
QUESTIONS?  
As a manufacturer, we are com-  
mitted to providing complete  
customer satisfaction. If you  
have questions, or if parts are  
damaged or missing, PLEASE  
CONTACT OUR CUSTOMER SER-  
VICE DEPARTMENT  
DIRECTLY.  
CALL TOLL-FREE:  
1-888-922-4222  
Mon.–Fri., 6 a.m.–6 p.m. MST  
ON THE WEB:  
CAUTION  
Visit our website at  
Read all precautions and instruc-  
tions in this manual before using  
this equipment. Keep this manual  
for future reference.  
new products, prizes,  
fitness tips, and much more!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU BEGIN  
®
Thank you for selecting the new HEALTHRIDER HR2 model number is HRCR4896.0. The serial number can  
exerciser. The HEALTHRIDER HR2 exerciser offers a  
unique form of low-impact exercise that uses both the  
upper body and the lower body for greater cardiovas-  
cular benefits and increased toning.  
be found on a decal attached to the exerciser (see the  
front cover of this manual).  
To avoid a registration fee for any service needed  
under warranty, you must register the exerciser at  
For your benefit, read this manual carefully before  
you use the exerciser. If you have questions after  
reading this manual, please see the front cover of this  
manual. To help us assist you, note the product model  
number and serial number before contacting us. The  
Before reading further, please familiarize yourself with  
the parts that are labeled in the drawing below.  
Handlebar  
FRONT  
Console  
Collar  
Handlebar Knob  
Seat Handlebar  
Seat  
Upper Pedal  
Lower Pedal  
Seat Knob  
(beneath Seat)  
REAR  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
To hire an authorized service technician to assemble the exerciser, call toll-free 1-800-445-2480.  
Assembly requires two persons. Place all parts of the exerciser in a cleared area and remove the packing  
materials. Do not dispose of the packing materials until assembly is completed. In addition to the included hex  
keys, assembly requires a phillips screwdriver  
wrench  
and an adjustable  
.
As you assemble the exerciser, use the drawings below to identify small parts. The number in parentheses below  
each drawing is the key number of the part, from the PART LIST on page 14. The second number is the quantity  
needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the parts  
bag, check to see if it has been pre-assembled.  
M6 Spring  
M8 Curved  
M10 Spring  
M10 Washer  
(58)–2  
M10 Curved  
Washer (60)–4  
Washer (57)–2  
Washer (59)–4  
Washer (56)–1  
M8 Nylon  
M6 x 10mm  
Screw (55)–1  
M6 x 16mm  
Screw (41)–4  
M8 x 40mm Button  
Bolt (39)–4  
Locknut (40)–4  
M10 x 15mm Button  
Screw (48)–2  
M10 x 75mm Button Screw (42)–4  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.  
1
To make assembly easier, read the information  
on page 4 before you begin assembling the  
exerciser.  
Press a Stabilizer Endcap (11) onto each end of a  
Stabilizer (10). Attach the Stabilizer to the front of  
the Frame (1) with two M10 x 75mm Button Screws  
(42) and two M10 Curved Washers (59).  
11  
1
10  
59  
42  
59  
11  
2. Press a Stabilizer Endcap (11) onto each end of the  
other Stabilizer (10). Attach the Stabilizer to the  
back of the Frame (1) with two M10 x 75mm Button  
Screws (42) and two M10 Curved Washers (59).  
2
1
11  
10  
59  
11  
59  
42  
3. Identify the Left Pedals (24), which are marked with  
“L” stickers. Using an adjustable wrench, firmly  
tighten the Left Pedals counterclockwise into the  
Pedal Frame (5). Tighten the Right Pedals (25)  
clockwise into the Pedal Frame. Important:  
Tighten all Pedals as firmly as possible. After  
using the exerciser for one week, retighten the  
Pedals. For best performance, keep the Pedals  
tightened.  
3
5
25  
24  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Orient the Pedal Frame (5) as shown, and then  
insert the Pedal Frame into the Pivot Frame (6).  
Attach the Pedal Frame with two M10 x 15mm  
Button Screws (48), two M10 Spring Washers (57),  
and two M10 Washers (58).  
4
58  
6
57  
48  
5
5. Orient the Handlebar (7) as shown. Next, slide the  
Handlebar Sleeve (31) downward until the tab on  
the Handlebar Sleeve is covering the indicated hole  
in the Handlebar.  
5
Loosen and remove the Handlebar Knob (28). Next,  
press the tab on the Handlebar Sleeve (31) and  
insert the Handlebar (7) and the Handlebar Sleeve  
into the Frame (1); make sure that the tab on the  
Handlebar Sleeve is in the indicated slot in the  
Frame. Then, slide the Handlebar upward or down-  
ward to the desired height, and tighten the  
Handlebar Knob into the Frame and an adjustment  
hole in the Handlebar. Make sure that the  
Handlebar Knob is engaged in an adjustment  
hole in the Handlebar.  
7
Tab  
31  
1
Hole  
Slot  
28  
6. Orient the Seat (8) and the Seat Carriage (3) as  
shown. Attach the Seat to the Seat Carriage with  
four M6 x 16mm Screws (41). Note: The Screws  
may be preattached to the underside of the Seat.  
6
8
3
41  
41  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Orient a Seat Handlebar (9) as shown. Attach the  
Seat Handlebar to the Seat Carriage (3) with two  
M8 x 40mm Button Bolts (39), two M8 Curved  
Washers (60), and two M8 Nylon Locknuts (40).  
7
9
Repeat this step for the other Seat Handlebar (9).  
3
60  
39  
60  
40  
9
8. Loosen the Seat Knob (29). Orient the Seat Carriage  
(3) as shown and slide it onto the Seat Frame (2).  
Attach the Seat Carriage with an M6 x 10mm Screw  
(55) and an M6 Spring Washer (56). Then, slide the  
Seat Carriage forward or backward to the desired  
position and retighten the Seat Knob.  
8
2
29  
56  
55  
3
9. The Console (12) requires one “AAA” battery (not  
included); an alkaline battery is recommended.  
Carefully pry the Console away from the Upper  
Console Shroud (13) as shown. Be careful not to  
dislodge the reed switch wire. Insert the battery  
into the holder on the back of the Console. Make  
sure that the battery is oriented as shown by  
the diagram on the back of the Console. Then,  
reinsert the Console into the Console Shroud.  
9
12  
Reed Switch Wire  
13  
10. Make sure that all parts are properly tightened. To protect the floor or carpet from damage, place a mat  
under the exerciser.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO OPERATE THE EXERCISER  
ADJUSTING THE SEAT  
EXERCISING ON THE EXERCISER  
To adjust the posi-  
tion of the seat,  
Sit on the seat, place your feet on the lower pedals,  
and hold the handlebar. Your hands can be positioned  
close together or far apart, or in an overhand or  
underhand grip. If necessary, adjust the position of  
the seat or the height of the handlebar.  
Seat  
loosen the seat  
knob, move the  
seat forward or  
backward to the  
desired position,  
and then retighten  
the knob. To deter-  
mine if the seat is  
properly adjusted,  
sit on the seat and  
pull the handlebar  
as close as possible  
To begin exercising, pull the handlebar toward your  
waist while pushing the pedals away with your legs.  
Return to the starting position. This completes one  
repetition. Repeat, moving with a smooth, continuous  
motion. For the best results, move through the full  
range of motion and maintain a steady pace.  
Seat  
Knob  
CAUTION: To avoid injury, keep your back  
straight; do not arch your back. Do no operate the  
exerciser without the cylinder shields in place.  
to your stomach. Your legs should be almost straight,  
with your knees bent slightly.  
ADJUSTING THE RESISTANCE  
Handlebar  
To change the  
resistance, turn the  
Collar  
Resistance  
Cylinder  
collar at the front of  
the resistance  
cylinder. There are  
ten different resis-  
tance levels. A  
Seat  
small arrow on the  
side of the resis-  
tance cylinder will  
show which resis-  
Upper  
Pedals  
tance level is selected. CAUTION: The resistance  
cylinder becomes very hot during use. Allow the  
resistance cylinder to cool before touching it.  
When adjusting the resistance, touch only the  
resistance adjustment collar.  
Lower  
Pedals  
ADJUSTING THE HANDLEBAR  
To adjust the height  
of the handlebar,  
To focus on the muscles of the upper body, place your  
feet on the upper pedals as you exercise.  
loosen the handle-  
bar knob, move the  
handlebar upward  
or downward to the  
Note: The console will automatically turn on when you  
begin exercising on the exerciser. The operation of  
the console is described on the following page.  
desired position,  
and then retighten  
the knob into an  
adjustment hole in  
the handlebar.  
Handlebar  
Handlebar  
Knob  
Make sure that  
the handlebar  
knob is engaged in an adjustment hole.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
DESCRIPTION OF THE CONSOLE  
HOW TO OPERATE THE CONSOLE  
The console offers five modes that provide instant  
exercise feedback:  
1. To turn on the  
Arrow  
power, press the  
console button or  
simply begin  
• Time—This mode displays the elapsed time. Note: If  
you stop exercising for a few seconds, the Time  
mode will pause.  
exercising.  
2. Select the  
desired mode:  
• Reps/Min—This mode displays your exercise pace,  
in repetitions per minute.  
To select the  
• Count—This mode displays the total number of rep-  
etitions you have completed, up to 9,999 repetitions.  
Time, Reps/Min,  
Count, or  
Calories mode,  
press the console  
button repeatedly  
Button  
• Calories—This mode displays the approximate num-  
ber of calories you have burned.  
until an arrow points to the name of the desired  
mode. Make sure that the Scan mode is not select-  
ed.  
• Scan—This mode displays the Time, Reps/Min,  
Count, and Calories modes, for a few seconds  
each, in a repeating cycle.  
To select the Scan mode, press the console button  
repeatedly. While the Scan mode is selected, an  
arrow will show which mode is currently displayed.  
To reset the Time, Count, and Calories modes to  
zero, hold down the console button for a few sec-  
onds.  
3. The console has an “auto-off” feature. If the  
pedals are not moved and the console button is  
not pressed for a few minutes, the power will turn  
off automatically to conserve the battery.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE AND TROUBLESHOOTING  
Inspect and tighten all parts of the exerciser regularly.  
Replace any worn parts immediately.  
WHEEL MAINTENANCE  
Clean the wheel  
and the frame track  
on a regular basis.  
Use a damp cloth  
and mild soap to  
remove dust and  
debris from the  
To clean the exerciser, use a damp cloth and a small  
amount of mild soap. Important: To prevent damage to  
the console, keep liquid away from the console and  
keep the console out of direct sunlight. When stor-  
ing the exerciser, remove the battery from the con-  
sole.  
Wheel  
Track  
wheel and the track  
on which it travels.  
HOW TO REPLACE THE BATTERY  
If the display of the console becomes dim, the “AAA”  
battery should be replaced. See step 9 on page 7 and  
replace the old battery.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONDITIONING GUIDELINES  
WARNING:  
gy. Only after the first few minutes of exercise does  
your body begin to use stored fat calories for energy. If  
your goal is to burn fat, adjust your pace until your  
heart rate is near the lowest number in your training  
zone as you exercise. For increased fat burning,  
adjust your pace until your heart rate is near the mid-  
dle number in your training zone as you exercise.  
Before beginning this or any exercise pro-  
gram, consult your physician. This is espe-  
cially important for persons over the age of 35  
or persons with pre-existing health problems.  
Aerobic Exercise  
The following general guidelines will help you to plan  
your exercise program. Remember that proper nutri-  
tion and adequate rest are essential for successful  
results.  
If your goal is to strengthen your cardiovascular sys-  
tem, your exercise must be “aerobic.” Aerobic exercise  
is activity that requires large amounts of oxygen for  
prolonged periods of time. This increases the demand  
on the heart to pump blood to the muscles, and on the  
lungs to oxygenate the blood. For aerobic exercise,  
adjust your pace until your heart rate is near the high-  
est number in your training zone.  
EXERCISE INTENSITY  
Whether your goal is to burn fat or to strengthen your  
cardiovascular system, the key to achieving the  
desired results is to exercise with the proper intensity.  
The proper intensity level can be found by using your  
heart rate as a guide. The chart below shows recom-  
mended heart rates for fat burning, maximum fat burn-  
ing, and cardiovascular (aerobic) exercise.  
HOW TO MEASURE YOUR HEART RATE  
To measure your  
heart rate, first exer-  
cise for at least four  
minutes. Then, stop  
exercising and place  
two fingers on your  
wrist as shown.  
Take a six-second  
heartbeat count,  
and multiply the result by 10 to find your heart rate.  
For example, if your six-second heartbeat count is 14,  
your heart rate is 140 beats per minute. (A six-second  
count is used because your heart rate will drop rapidly  
when you stop exercising.)  
To find the proper heart rate for you, first find your age  
at the bottom of the chart (ages are rounded off to the  
nearest ten years). Next, find the three numbers above  
your age. The three numbers are your “training zone.”  
The lower two numbers are recommended heart rates  
for fat burning; the highest number is the recommend-  
ed heart rate for aerobic exercise.  
Adjust your pace until your heart rate is at the desired  
level.  
WORKOUT GUIDELINES  
Each workout should include the following three parts:  
Fat Burning  
A warm-up, with 5 to 10 minutes of stretching and  
light exercise. A proper warm-up increases your body  
temperature, heart rate, and circulation in preparation  
for exercise.  
To burn fat effectively, you must exercise at a relative-  
ly low intensity level for a sustained period of time.  
During the first few minutes of exercise, your body  
uses easily accessible carbohydrate calories for ener-  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Training zone exercise, consisting of 20 to 30 min-  
utes of exercising with your heart rate in your training  
zone. (During the first few weeks of your exercise  
program, do not keep your heart rate in your training  
zone for longer than 20 minutes.)  
EXERCISE FREQUENCY  
To maintain or improve your condition, plan three  
workouts each week, with at least one day of rest  
between workouts. After a few months of regular exer-  
cise, you may complete up to five workouts each  
week, if desired. The key to success is make exercise  
a regular and enjoyable part of your everyday life.  
A cool-down, with 5 to 10 minutes of stretching. This  
will increase the flexibility of your muscles and will  
help to prevent post-exercise problems.  
SUGGESTED STRETCHES  
1
The correct form for several basic stretches is shown at the right.  
Move slowly as you stretch—never bounce.  
1. Toe Touch Stretch  
Stand with your knees bent slightly and slowly bend forward from  
your hips. Allow your back and shoulders to relax as you reach  
down toward your toes as far as possible. Hold for 15 counts, then  
relax. Repeat 3 times. Stretches: Hamstrings, back of knees and  
back.  
2
2. Hamstring Stretch  
Sit with one leg extended. Bring the sole of the opposite foot  
toward you and rest it against the inner thigh of your extended leg.  
Reach toward your toes as far as possible. Hold for 15 counts,  
then relax. Repeat 3 times for both legs. Stretches: Hamstrings,  
lower back and groin.  
3
3. Calf/Achilles Stretch  
With one leg in front of the other, reach forward and place your  
hands against a wall. Keep your back leg straight and your back  
foot flat on the floor. Bend your front leg, lean forward and move  
your hips toward the wall. Hold for 15 counts, then relax. Repeat 3  
times for both legs. To cause further stretching of the achilles ten-  
dons, bend your back leg as well. Stretches: Calves, achilles ten-  
dons and ankles.  
4
4. Quadriceps Stretch  
With one hand against a wall for balance, reach back and grasp  
one foot with your other hand. Bring your heel as close to your but-  
tocks as possible. Hold for 15 counts, then relax. Repeat 3 times  
for both legs. Stretches: Quadriceps and hip muscles.  
5
5. Inner Thigh Stretch  
Sit with the soles of your feet together and your knees outward.  
Pull your feet toward your groin area as far as possible. Hold for 15  
counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip  
muscles.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART LIST—Model No. HRCR4896.0  
R1206A  
Key No. Qty.  
Description  
Key No. Qty.  
Description  
1
1
1
1
1
1
1
1
1
2
2
4
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
2
1
1
4
1
1
Frame  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
#
1
1
2
2
1
4
4
4
4
4
8
2
2
2
2
2
1
1
2
2
11  
6
1
1
2
8
4
4
1
1
1
3
Clamp  
2
Seat Frame  
Post Foam  
3
Seat Carriage  
Wheel Frame  
Long Handlebar Foam  
Short Handlebar Foam  
Magnet  
4
5
Pedal Frame  
6
Pivot Frame  
M3.5 x 10mm Screw  
M8 x 40mm Button Bolt  
M8 Nylon Locknut  
M6 x 16mm Screw  
M10 x 75mm Button Screw  
Bushing  
7
Handlebar/Post  
Seat  
8
9
Seat Handlebar  
Stabilizer  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
Stabilizer Endcap  
Console/Reed Switch Wire  
Upper Console Shroud  
Left Console Shroud  
Right Console Shroud  
Left Side Shield  
Right Side Shield  
Left Frame Shield  
Right Frame Shield  
Resistance Cylinder  
Mounting Bracket  
Wheel  
M10 x 50mm Union Bolt  
Wheel Spacer  
Cylinder Spacer  
Pivot Bushing  
M10 x 15mm Button Screw  
M10 x 37mm Union Bolt  
M10 x 104mm Union Bolt  
M10 x 120mm Button Bolt  
M10 Nylon Locknut  
M4 x 16mm Screw  
M4 x 8mm Screw  
M6 x 10mm Screw  
M6 Spring Washer  
M10 Spring Washer  
M10 Washer  
Emblem Mount  
Left Pedal/Strap  
Right Pedal/Strap  
Pivot Rod  
Bumper  
M10 Curved Washer  
M8 Curved Washer  
Long Cylinder Shield  
Short Cylinder Shield  
User’s Manual  
Handlebar Knob  
Seat Knob  
Handlebar Endcap  
Handlebar Sleeve  
Handlebar Bushing  
#
Hex Key  
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. For information  
about ordering replacement parts, see the back cover of this manual.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPLODED DRAWING—Model No. HRCR4896.0  
R1206A  
36  
30  
12  
8
35  
35  
54  
13  
30  
7
34  
3
9
30  
40  
15  
14  
54  
56  
55  
30  
43  
27  
60  
9
54  
48  
40  
41  
28  
27  
31  
32  
41  
41  
60  
39  
53  
38  
6
52  
58  
57  
40  
53  
36  
58  
49  
58  
51  
26  
25  
37  
57  
51  
58  
2
50  
17  
58  
52  
43  
47  
49  
58  
50  
5
29  
53  
33  
53  
53  
23  
43  
16  
53  
47  
53  
4
19  
21  
24  
62  
11  
54  
44  
58  
10  
54  
43  
20  
59  
42  
43  
44  
58  
45  
45  
22  
59  
42  
1
18  
53  
46  
11  
11  
61  
10  
59  
11  
59  
42  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ORDERING REPLACEMENT PARTS  
To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to give  
the following information:  
• the MODEL NUMBER of the product (HRCR4896.0)  
• the NAME of the product (HEALTHRIDER HR2 exerciser)  
• the SERIAL NUMBER of the product (see the front cover of this manual)  
• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING on  
pages 14 and 15)  
LIMITED WARRANTY  
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and  
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-  
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-  
ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.  
All repairs for which warranty claims are made must be pre-authorized by ICON. If the product is shipped  
to a service center, freight charges to and from the service center will be the customer’s responsibility. For  
in-home service, the customer will be responsible for a minimal trip charge. This warranty does not extend  
to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,  
improper or abnormal usage or repairs not provided by an ICON authorized service center; products used  
for commercial or rental purposes; or products used as store display models. No other warranty beyond  
that specifically set forth above is authorized by ICON.  
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-  
nection with the use or performance of the product or damages with respect to any economic loss, loss  
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other  
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-  
dental or consequential damages. Accordingly, the above limitation may not apply to you.  
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of  
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth  
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above  
limitation may not apply to you.  
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.  
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813  
Part No. 248844 R1206A  
Printed in China © 2006 ICON IP, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

GPX Speaker System HT050B User Manual
Graco Marine Instruments 234414 User Manual
HP Hewlett Packard Switch 445942 001 User Manual
Hunter Fan Dehumidifier 33116 User Manual
Hunter Fan Outdoor Ceiling Fan 23687 User Manual
Hunter Fan Thermostat F42213 User Manual
Husqvarna Lawn Mower 532 43 65 03 User Manual
Husqvarna Trimmer 26 R User Manual
IBM Printer 1xR User Manual
Image Treadmill IMTL12901 User Manual