INSTALL INSTRUCTIONS
C-TSM-CV-D and C-TSM-CV-P
1996-2008 CROWN VICTORIA
DRIVER and PASSENGER - TRUNK SIDE MOUNTS
TOOLS REQUIRED:
• Drill with 1/8” and 3/16” drill bits
• Open End Wrench - 3/8”
• Phillips Screwdriver
HARDWARE:
QTY:
DESCRIPTION:
PART #:
3
3
3
10/32 X 1/2” Machine Screw
10/32 Keps Nut
GSM33118
GSM30028
GSM33195
#10 x 3/4” Sheet Metal Screw
LINE DRAWING:
Passenger Side shown
# C-TSM-CV-P
Always!
• Read all instructions before installing any Havis-Shields Equipment Corp products.
• Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
• Use hardware provided with install kit
• For product support: visit the Install Instructions Section of our website at
1
C-TSM-CV-P_INST_4-08
Download from Www.Somanuals.com. All Manuals Search And Download.
|