INSTALL INSTRUCTIONS C-MCB-CV
DUAL IN-DASH MICROPHONE CLIP BRACKET
1996-2007 FORD CROWN VICTORIA
TOOLS REQUIRED:
Ratcheting wrench
Sockets - 7/16”, #10, #8
Screwdriver set
T-20 torx bit
Always!
ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.
ꢀ Disconnect the vehicle battery. Removing seat bolts on some vehicles may give the vehicles
computer a false reading, causing a warning light on the instrument cluster. This requires the
vehicles’ computer to be reset with a vehicle diagnostics tool.
ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
ꢀ Use only hardware provided with install kit.
ꢀ For product support, visit the Install Instructions Section of our website at
800-524-9900 and ask for technical support.
Remove hex head trim screws
Police Package Crown Vic Dash.
Carefully remove trim panel
shown above
C-MCB-CV-INST-6-07
Download from Www.Somanuals.com. All Manuals Search And Download.
|