INSTALLATION INSTRUCTIONS
C-3190 SLIDE-OUT RADIO TRAY
1996-2008 FORD CROWN VICTORIA
4
Back Seat
Wall
2
3
Step 1. Align forward radio shelf
bracket with existing holes in front
of trunk wall. Use 2 (two) 1/4” x 1”
hex head cap screws, 2 (two) 1/4”
flat washers and 2 (two) 1/4”
flange nuts. Don’t fully tighten
bracket yet.
Step 3. Insert 2 (two) 1/4” x 1” hex
head cap screws in shelf holes.
Place bottom support bracket over
hex head cap screws, then place
hanger support bracket on top of
bottom bracket. Place 2 (two) 1/4"
flat washers and 2 (two) 1/4" flange
nuts. 1998 Crown Vic: use pair of
holes toward front of vehicle. For
1997 Crown Vic: use holes toward
rear of vehicle.
2 (two) 1/4” flat washers, and 1/4”
flange nuts. Make sure shelf is
level and tighten all hardware.
Tools needed: 7/16” wrench and
socket, drill and 1/4” bit, level.
Hardware Included: 8 (eight) 1/4”
x 1” screws, 8 (eight) 1/4” flange
nuts, 8 (eight) 1/4” flat washers.
Step 2. Use a block of wood or a
shim to level radio shelf. Drill 1/4”
hole into trunk hinge, support base
on driver’s side. Fasten down shelf
using 1 (one) 1/4” x 1” hex head
cap screw, 1 (one) 1/4” flat
washer, and 1 (one) 1/4” flange
nut.
Note: Do not substitute hardware.
Do not use self-tapping screws as
they will vibrate loose.
Step 4. Using the support as a
template, mark and drill two holes in
upper deck. Bolt support bracket on
with 1/4” x 1” hex head cap screws,
C-3190_INST_9-07
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Graco Welding System 313258C User Manual
Grizzly Saw Model H5698 User Manual
Haier TV DVD Combo HLC26R1 User Manual
Harbor Freight Tools Air Compressor 94734 User Manual
Harbor Freight Tools Soldering Gun 94903 User Manual
Hasbro Baby Toy 62320 User Manual
Hauppauge Network Card WinTV USB User Manual
Hearth and Home Technologies Indoor Fireplace ST 36TR User Manual
Honeywell Thermostat Electronic Thermostat User Manual
IBM Computer Hardware 6826 User Manual