Select the region that you are
located in and click Next.
4. WinTV DVB reception advice
6. CyberLink Software Installation
To start the software installation, click Start / Run then type your CD-
ROM drive letter (for example: D:\) and then Setup.exe.
DVB-T (WinTV-HVR-4000 only)
Please ensure that you have a suitable TV aerial connected to the
WinTV card. You should then ensure you are located in a area that
supports Digital Terrestrial TV by visiting:
Click Next and follow the on
screen instructions to install the
software.
WinTV-HVR-4000
www.dtg.org.uk/retailer/coverage.html and entering your post code.
WinTV-NOVA-HD-S2
If your area does have digital Terrestrial TV coverage, please check
your TV antenna as most antenna’s that are over 8 years old may not
support the Digital Terrestrial TV broadcasts and you may need to
update yours to a ‘Wideband or Highgain’ antenna.
Quick Installation Guide
Once the installation is complete,
please re-start your computer.
for Windows XP / Vista 32-bit
© 2007 Hauppauge Computer Works · QI-WINTV-SC-V1.1-ENG · 2007/06/25
Select the signal type that you
Tech Support: (+44) 0207 378 0202
Telephone: (+44) 0207 378 1997
Fax: (+44) 0207 357 9171
want to configure and click Next.
Hauppauge Computer Works, Ltd.
DVB-S/DVB-S2
10 Borough High Street
Bank Chambers
Scanning for DVB-S channels will
also scan for HD DVB-S2 channels.
Select the location where you
want to save recorded TV files
and click Next.
Please ensure that your satellite dish is correctly aligned and the Sat
cable is connectly directly from the LNB and not via a set top box.
London, UK, SE1 9QQ
5. Install the WinTV Windows driver
Tech Support: (+1) 631 434 3197
Telephone: (+1) 631 434 1600
Fax: (+1) 631 434 3198
Hauppauge Computer Works, Inc.
91 Cabot Court
Hauppauge, NY 11788
7. CyberLink PowerCinema
ote: If you have any anti-virus software enabled, please dis-
able it during the installation of the software.
N
To start the PowerCinema application double click on the CyberLink
PowerCinema Icon on your desktop or click on Start / All Programs /
CyberLink PowerCinema / PowerCinema.
Tech Support: (+65) 276 4412
Telephone: (+65) 276 9163
Fax: (+65) 276 9167
Hauppauge Digital Asia, Pte. Ltd.
Blk 1093, Lower Delta Road #04-05
Tiong Bahru Industrial Estate
Singapore 169204
Start your computer, the Found
New Hardware Wizard will
appear, Click on Cancel.
The Setup Wizard will appear
which will guide you through the
setup and configuration of the
application, click Next.
TV Setup (WinTV-HVR-4000 only)
If you have a cable system con-
nected click on Scan Channels, if
you do not then click Next and
Scan Channels for scanning TV
antenna channels.
1. Contents of the WinTV-package
● WinTV-HVR-4000 or
WinTV-NOVA-HD-S2 PCI board
● Remote control transmitter with
2 AAA batteries
● Remote control receiver
Insert your WinTV Installation CD-
Select the type of screen that you
are using (4:3 is normal TV /
Monitor screen size and 16:9 is a
widescreen TV / Monitor) and
click Next.
with velcro dot fastener
ROM and click on Start then
Once the channel scan is finished
click on Next.
● FM Radio antenna
(WinTV-HVR-4000 only)
● S-Video/Composite Adapter
(WinTV-HVR-4000 only)
● Installation CD-ROM with:
· CyberLink PowerCinema 5.1
Computer, you should then see
the HCW3_x CD, double click on this CD-ROM then double click on the
file called HCWDriverInstall.
WinTV-HVR-4000
You will then be presented with a blue screen which will begin
installing and updating the drivers for your product.
2. Installing the WinTV-board
ote: Your PC could be damaged by electrostatic discharge.
Avoid this by contacting the earthed chassis of your PC,
Select the type of speaker setup
that you are using and click Next.
Digital DVB-T Setup
N
before you open it or touch the PCI card.
(WinTV-HVR-4000 only)
To install, switch off the computer and remove the computer cover. The
manufacturer of your PC supplies instructions on removing the PC cover.
Select Scan Channels to start the
channels scan.
When complete click on Next.
● Locate a free PCI slot (a short white slot). Unscrew and remove the
metal cover plate which covers the back of the empty slot.
● Plug the WinTV board into the PCI slot, and screw the WinTV metal
You will now need to check that
the drivers are installed correctly.
Right Click on My Computer and
Left Click on Properties.
Click on Hardware tab and then
Device Manager.
In the Device Manager click on
the + symbol on the Sound
Video and Game controllers sec-
tion. If the driver is installed cor-
rectly you should see the
Hauppauge WinTV.
cover plate to the PC.
3. Connections of the WinTV-board
PowerCinema detect the TV
tuners.
The WinTV-HVR-4000 has a
Hybrid tuner and can be config-
ured for all types of signals:
WinTV-HVR-4000
The DVB-T EPG allows you to
view now and next channel pro-
gram information, refer to the
online help for more information.
With the HVR you can watch and record analog TV, DVB-Terrestrial,
DVB-Satellite and DVB-S2 HD channels. You can also connect sources
via the composite and S-Video inputs and listen to FM Radio as well.
1.Analogue (Cable TV and
Antenna)
You can now connect the leads provided to the WinTV-HVR-4000 in
the following order.
Click on Next.
2.DVB-T (Digital Terrestrial)
3.DVB-S (Digital Satellite)
and DVB-S2 (Digital Satellite HD)
In addition you can also connect
a composite or S-Video source (Hi-8 camcorder, VCR, cable or satel-
lite box).
The WinTV-NOVA-HD-S2 has a HD satellite tuner and can be config-
ured for DVB-S (and HD DVB-S2) only.
FM
TV
FM Radio-Antenna
TV-Antenna
If any of them have a yellow exclamation mark, follow this procedure:
1.Close Device Manager
2.On the Hauppauge Installation CD-ROM double click on the file
called HCWclear.exe and select the last 2 options and click on OK.
3. Once the black screen has closed down, re-start the computer and
continue from page 3 above or contact our technical support
department.
SAT
SAT-Cable from the LNB of your satellite dish
S-VIDEO IN S-Video-Input *
LINE IN
IR
Stereo-Audio-Input, from the output of your source
Input for the Infra-red-Sensor
ote: for using a RCA Yellow Phono composite input you
must use the supplied S-Video to composite adapter.
You need to ensure that you have connected the cables correctly
before performing a channel scan.
You can configure or change the signal input by selecting Settings /
TV / Signal settings.
N
WinTV-NOVA-HD-S2
With the WinTV-NOVA-HD-S2 you can watch and record DVB-Satellite
and DVB-S2 HD channels.
You can now connect the leads provided to the WinTV-NOVA-HD-S2
in the following order.
SAT
IR
SAT-Cable from the LNB of your satellite dish
Input for the Infra-red-Sensor
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 2
Page 3
Page 4
Page 1
|