Harman Kardon Stereo Receiver AVR 2700 User Manual

AVR 3700,AVR 370

AVR 2700,AVR 270

Audio/video receiver

Owner’s Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction, Supplied Accessories,

Important Safety Information and Place the Receiver

AVR

Introduction

IMPORTANT SAFETY INFORMATION

Thank you for choosing this Harman Kardon product!

Verify Line Voltage Before Use

Formorethanﬁftyyears,theHarmanKardonmissionhasbeentoshareapassionformusic

and entertainment, using leading-edge technology to achieve premium performance.

Sidney Harman and Bernard Kardon invented the receiver, a single component designed

to simplify home entertainment without compromising performance. Over the years,

Harman Kardon products have become easier to use, while offering more features and

sounding better than ever.

The AVR 3700 and AVR 2700 have been designed for use with 120-volt AC current.

The AVR 370 and AVR 270 have been designed for use with 220 – 240-volt AC current.

Connection to a line voltage other than that for which your receiver is intended can create

a safety and ﬁre hazard and may damage the unit. If you have any questions about the

voltage requirements for your speciﬁc model, or about the line voltage in your area,

contact your selling dealer before plugging the unit into a wall outlet.

The AVR 3700/AVR 370 7.2-channel and AVR 2700/AVR 270 7.1-channel digital audio/

video receivers continue this tradition with some of the most advanced audio and video

processing capabilities yet, and a wealth of listening and viewing options.

Do Not Use Extension Cords

To avoid safety hazards, use only the power cord supplied with your unit. We do not

recommend that extension cords be used with this product. As with all electrical devices,

do not run power cords under rugs or carpets, or place heavy objects on them. Damaged

power cords should be replaced immediately by an authorized service center with a cord

meeting factory speciﬁcations.

To obtain the maximum enjoyment from your new receiver, please read this manual and

refer back to it as you become more familiar with its features and their operation.

If you have any questions about this product, its installation or its operation, please

contact your Harman Kardon retailer or custom installer, or visit the Web site at

www.harmankardon.com.

Handle the AC Power Cord Gently

When disconnecting the power cord from an AC outlet, always pull the plug; never pull

the cord. If you do not intend to use your receiver for any considerable length of time,

disconnect the plug from the AC outlet.

Supplied Accessories

The following accessory items are supplied with your receiver. If any of these items are

missing, please contact your Harman Kardon dealer or Harman Kardon customer service

at www.harmankardon.com.

Do Not Open the Cabinet

There are no user-serviceable components inside this product. Opening the cabinet may

present a shock hazard, and any modiﬁcation to the product will void your warranty.

If water or any metal object such as a paper clip, wire or staple accidentally falls inside

the unit, disconnect it from the AC power source immediately, and consult an authorized

service center.

s System remote control

s Zone 2 remote control (AVR 3700/AVR 370 only)

s EzSet/EQ™ microphone

CATV or Antenna Grounding (AVR3700/AVR 2700)

s AM loop antenna

If an outside antenna or cable system is connected to this product, be certain that it is

grounded so as to provide some protection against voltage surges and static charges.

Section 810 of the United States National Electrical Code, ANSI/NFPA No. 70-1984,

provides information with respect to proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding

conductors, location of antenna discharge unit, connection to grounding electrodes and

requirements of the grounding electrode.

s FM wire antenna

s Six AAA batteries (AVR 3700/AVR 370); four AAA batteries (AVR 2700/AVR 270)

s AC power cord

NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV (cable TV)

system installer’s attention to article 820-40 of the NEC, which provides guidelines for

proper grounding and, in particular, speciﬁes that the cable ground shall be connected

to the grounding system of the building, as close to the point of cable entry as possible.

Place the Receiver

s Place the receiver on a ﬁrm and level surface. Be certain that the surface and any

mounting hardware can support the AVR’s weight.

s Provide proper space above and below the AVR for ventilation. Recommended

clearance distances are 30cm above the unit, 30cm behind the unit and 30cm on

each side of the unit.

s If you install the AVR in a cabinet or other enclosed area, provide cooling air within

the cabinet. Under some circumstances, a fan may be required.

s Do not obstruct the ventilation slots on the top of the receiver or place objects

directly over them.

s Do not place the receiver directly on a carpeted surface.

s Do not place the receiver in moist or humid locations, in extremely hot or cold

locations, in areas near heaters or heat registers, or in direct sunlight.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Front-Panel Controls

Power

Button

Info

Button

Power

Indicator

Setup

Button

Sensor

Message

Display

Volume

Knob

USB

Port

Resolution

Button

Video

Modes

Button

Back/Exit

Button

Source List

Button

Headphone Jack/

EzSet/EQ

HDMI^®Front

Input Connector

Audio

Effects

Button

Surround

Modes

Button

Left/Right

Buttons

Up/Down

Buttons

Mic Input

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Front-Panel Controls

Front-Panel Controls, continued

IMPORTANT NOTE: If you set the AVR’s video output resolution higher than

the capabilities of the actual connection between the AVR and your TV or video

display, you will not see a picture. If you are using the composite video connection

from the AVR to your TV (see Connect Your TV or Video Display, on page 17), the

resolution will automatically be set to 480i.

Power indicator/Power button: The AVR has four different power modes:

s Off (Power indicator not illuminated): When the rear-panel Main Power switch is in

the Off position or the power cord is unplugged the AVR is off and will not respond to

any commands. Plugging the power cord into a live AC outlet and setting the Main

Power switch in the On position will put the AVR into the Eco Standby mode.

Audio Effects button: Press this button to access the Audio Effects submenu, which

allows you to adjust the AVR’s tone controls and other audio controls. See Set Up Your

Sources, on page 26, for more information.

s Eco Standby (Power indicator glows solid amber):The Eco Standby mode minimizes

energy consumption when you're not using the AVR.When the AVR is in Eco Standby,

it will not automatically turn on or play audio in response to an AirPlay signal from

a networked device. When the AVR is in Eco Standby, pressing the Power button

turns it on. To put the AVR into Eco Standby when it is on, press the Power button

for more than three seconds. NOTE: The AVR will not automatically enter the Eco

Standby mode.

Video Modes button: Press this button for direct access to the Video Modes submenu,

which contains settings you can use to improve the video picture. Use the OK button

to scroll through the different modes, and use the Up/Down and Left/Right buttons to

make adjustments within each mode. See Set Up Your Sources, on page 26, for more

information.

Surround Modes button: Press this button to select a listening mode. The Surround

Modes menu will appear on screen, and the menu line will appear in the front-panel

display. Use the Up/Down buttons to change the surround-mode category and the Left/

Right buttons to change the surround mode for that category. See Set Up Your Sources,

on page 26, for more information.

s Standby (Power indicator glows solid amber): The Standby mode mutes the AVR

and shuts off its front-panel display, but allows the AVR to automatically turn on and

play audio in response to an AirPlay signal from a networked device. When the AVR

is in Standby, pressing the Power button turns it on. To put the AVR into Standby

when it is on, press the Power button for less than three seconds. NOTE: The AVR

will automatically enter the Standby mode whenever no control buttons have been

pressed and no audio signal has been present for 30 minutes.

Back/Exit button: Press this button to return to the previous menu or to exit the menu

system.

s On (Power indicator glows solid white): When the AVR is on it is fully operational.

Left/Right buttons: Use these buttons to navigate the AVR’s menus.

OK button: Press this button to select the currently highlighted item.

Up/Down buttons: Use these buttons to navigate the AVR’s menus.

IMPORTANT NOTE: If the PROTECT message ever appears on the AVR’s front-

panel message display, turn off the AVR and unplug it from the AC outlet.

Check all speaker wires for a possible short-circuit (the “+” and “–” conductors

touching each other or both touching the same piece of metal). If a short-circuit is not

found, bring the unit to an authorized Harman Kardon service center for inspection

and repair before using it again.

Source List button: Press this button to select a source device to watch/listen to. Use

the Up/Down buttons to scroll through the source-device list, and press the OK button to

select the source being displayed.

Setup button: Press this button to access the AVR’s main menu.

Info button: Press this button to access the AVR’s Source submenu, which contains the

settings for the source currently playing. Use the Up/Down buttons to scroll through the

different settings.

Message display: Various messages appear in this two-line display in response to

commands and changes in the incoming signal. In normal operation, the current source

name appears on the upper line, while the surround mode is displayed on the lower line.

When the on-screen display menu system (OSD) is in use, the current menu settings appear.

IR sensor: This sensor receives infrared (IR) commands from the remote control. It is

important to ensure that the sensor is not blocked. If covering the IR sensor is unavoidable

(such as when the receiver is installed inside of a cabinet), connect an optional infrared

receiver to the Remote IR In connector on the AVR’s rear panel.

Volume knob: Turn this knob to raise or lower the volume.

Headphone jack/EzSet/EQ Mic input: Connect a 1/4" stereo headphone plug to this

jack for private listening. This jack is also used to connect the supplied microphone for

the EzSet/EQ procedure described in Conﬁgure the AVR For Your Speakers, on page 26.

USB port: You can use this port to play audio ﬁles from a connected Apple iOS device

and play MP3 and WMA audio ﬁles from a USB device inserted into the USB port. You can

also use this port to perform software upgrades that may be offered in the future. Do not

connect a storage device, peripheral product or a PC here, unless you are instructed to

do so as part of an upgrade procedure.

HDMI (High-Deﬁnition Multimedia Interface^®) Front Input connector: Connect an

HDMI-capable source component that will be used only temporarily, such as a camcorder

or game console, here.

Resolution button: Press this button to access the AVR’s video output resolution

setting: 480p (AVR 3700/AVR 2700), 576p (AVR 370/AVR 270), 720p, 1080i, 1080p or

1080p/24Hz. Use the Up/Down and OK buttons to change the setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Rear-Panel Connectors

Wi-Fi Antenna Connector

(AVR 3700/AVR 370)

Analog Video

Connectors

Network

Connector

Radio Antenna

Connectors

HDMI Input

Connectors

HDMI Output

Connectors

Analog Audio

Connectors

Speaker

Connectors

Digital Audio

Connectors

Fan

Vents

AC Input

Connector

IR and Trigger

Connectors

Pre-Out Connectors

(AVR 3700/AVR 370)

RS-232

Connector

Main Power

Switch

Subwoofer

Connector

Rear-Panel Connectors (AVR 3700 shown)

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Rear-Panel Connectors

Subwoofer connector: Connect this jack to a powered subwoofer with a line-level input.

See Connect Your Subwoofer, on page 17, for more information. NOTE:The AVR 3700 and

AVR 370 have two subwoofer connectors.

Rear-Panel Connectors, continued

Radio Antenna connectors: Connect the supplied AM and FM antennas to their

respective terminals for radio reception.

IR and Trigger connectors: The following IR and trigger connectors are provided:

Wi-Fi^®Antenna connector (AVR 3700/AVR 370): If your home network is Wi-Fi,

connect the supplied Wi-Fi antenna here to enjoy Internet radio and content from DLNA^®-

compatible devices that are connected to the network. You do not need to make a wired

network connection.

s IR Remote In/Out connectors: When the IR sensor on the front panel is blocked

(such as when the AVR is installed inside a cabinet), connect an optional IR receiver

to the IR Remote In jack. The IR Remote Out jack may be connected to the IR input of

a compatible product to enable remote control through the AVR.

Network connector: If your home network is wired, use a Cat. 5 or Cat. 5E Ethernet

cable (not supplied) to connect the AVR’s Network connector to your home network to

enjoy Internet radio and content from DLNA-compatible devices that are connected to the

network. See Connect to Your Home Network, on page 20, for more information.

HDMI^®Input connectors: An HDMI connection transmits digital audio and video signals

between devices. If your source devices have HDMI connectors, using them will provide

the best possible video and audio performance quality. Since the HDMI cable carries

both digital video and digital audio signals, you do not have to make any additional audio

connections for devices you connect via the HDMI connection. See Connect Your Audio

and Video Source Devices, on page 18, for more information.

s Zone 2 IR Input connector: Connect a remote IR receiver located in Zone 2 of a

multizone system to this jack to control the AVR (and any source devices connected

to the Remote IR Output connector) from the remote zone.

s 12V Trigger connector: This connector provides 12V DC whenever the AVR is on. It

can be used to turn on and off other devices such as a powered subwoofer.

Speaker connectors: Use two-conductor speaker wire to connect each set of terminals

to the correct speaker. See Connect Your Speakers, on page 17, for more information.

NOTE: The Assigned Amp speaker connectors are used for the surround back

channels in a 7.1- channel home theater, or you can reassign them to a remote room

for multizone operation or to front height channels for Dolby^®Pro Logic IIz operation.

See Place Your Speakers, on page XX, for more information.

HDMI Output connectors: If your TV has an HDMI connector, use an HDMI cable (not

included) to connect it to the AVR’s HDMI Out connector. The AVR will automatically

transcode component and composite video input signals to the HDMI format (upscaling

to as high as 1080p), so you do not need to make any other connections to your TV from

the AVR or from any video source devices you connect to the AVR. NOTE: The AVR 3700

and AVR 370 have two HDMI Out connectors.

Digital Audio connectors: If your non-HDMI source devices have digital outputs,

connect them to the AVR’s digital audio connectors. NOTE: Make only one type of digital

connection (HDMI, optical or coaxial) from each device. See Connect Your Audio and Video

Source Devices, on page 18, for more information.

Notes on using the HDMI Output connector:

s When connecting a DVI-equipped display to the HDMI Out connector, use an

HDMI-to-DVI adapter and make a separate audio connection.

RS-232 connector: This connector is used to connect to external control hardware.

Consult a certiﬁed professional installer for more information.

s Make sure the HDMI-equipped display is HDCP (High-bandwidth Digital Content

Protection)-compliant. If it isn’t, do not connect it via an HDMI connection; use an

analog video connection instead and make a separate audio connection.

Fan Vents: These vents are used by the AVR’s fan to cool the system. Maintain a

clearance of at least three inches (75mm) from the nearest surface to avoid overheating

the unit. It is normal for the fan to remain off at most normal volume levels. An automatic

temperature sensor turns the fan on only when it is needed.

Analog Video connectors: The following Analog Video connectors are provided:

IMPORTANT NOTE: Never block the fan vents. Doing so could allow the AVR to

overheat to dangerous levels.

s Composite Video Input connectors: Use composite video connectors for video

source devices that don’t have HDMI or component video connectors. You will also

need to make an audio connection from the source device to the AVR. See Connect

Your Audio and Video Source Devices, on page 18, for more information.

Main Power switch: This mechanical switch turns the AVR’s power supply on or off. It is

usually left on, and it cannot be turned on or off using the remote control.

s Component Video Input connectors: If any of your video source devices have

component video connectors (and do not have HDMI connectors), using the

component video connectors will provide superior video performance. You will also

need to make an audio connection from the device to the receiver. See Connect Your

Audio and Video Source Devices, on page 18, for more information.

AC Input connector: After you have made and veriﬁed all other connections, plug the

supplied AC power cord into this receptacle and into an unswitched wall outlet.

s Composite Video Monitor Out connector: If your TV or video display does not

have an HDMI connector, use a composite video cable (not included) to connect the

AVR’s Composite Video Monitor Out connector to your TV ’s composite video input.

NOTE: The HDMI connection to your TV is preferred. If you use the composite video

connection to your TV, you will not be able to view the AVR’s on-screen menus.

Analog Audio connectors: The following analog audio connectors are provided:

s Analog Audio Input connectors: Use the AVR’s Analog Audio Input connectors for

source devices that don’t have HDMI or digital audio connectors. See Connect Your

Audio and Video Source Devices, on page 18, for more information.

s Analog Rec[ord] Out connectors: Connect this analog audio output to the analog

audio input of a recording device. A signal is available at this output whenever an

analog audio source is playing.

s Zone 2 Out connectors: Connect these jacks to an external ampliﬁer to power the

speakers in the remote zone of a multizone system.

Pre-Out connectors (AVR 3700/AVR 370): Connect these jacks to external ampliﬁers if

more power is desired.The function of the Surround Back/Front Height/Zone 2 connectors

is determined by the setting you make for the Assigned Amp. See Manual Speaker Setup:

Number of Speakers, on page 38, for more information.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

System Remote Control Functions

IR Transmitter

AVR Power On/Off

Device Power

On/Off Buttons

Buttons

Source Selector

Buttons

Audio Effects

Button

Surround Modes

Button

Video Modes

Button

Number

Buttons

Last Channel

Button

Activity Button

Menu Button

Back/Exit

Button

Up/Down/Left/Right

Buttons

OK Button

Disc Menu

Button

Backlight Button

(AVR 3700/AVR 370)

A/B/C/D Buttons

Volume Up/Down

Buttons

Channel Up/Down and

Page Buttons

Mute Button

Transport Control

Buttons

Info Button

AVR Button

Sleep Button

Learn Button

(AVR 3700/AVR 370)

Zone Selector

Switch

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

System Remote Control Functions

Menu button: This button is used within the tuner menus and an iPod connected to the

AVR’s front-panel USB port, and is also used to display the main menu on some source

devices. To display the AVR’s menu system, press the AVR button.

System Remote Control Functions, continued

In addition to controlling the AVR, the AVR remote is capable of controlling eight other

devices, including an iPod/iPhone device connected to the AVR’s front-panel USB port.

During the installation process, you may program the codes for each of your source

components into the remote. (See Program the Remote to Control Your Source Devices

and TV, on page 23, for programming information.) To operate a component, press its

Source Selector button to change the remote’s control mode.

Up/Down/Left/Right buttons: These buttons are used to navigate the menu system and

to operate the tuner.

OK button: This button is used to select items from the menu system.

Backlight button (AVR 3700/AVR 370): Press this button to illuminate the buttons on

the remote. Press it again to turn the backlight off, or wait 5 seconds after the last button

press for the light to turn off on its own.

A button’s function depends on which component is being controlled. See Table A13 in

the Appendix for listings of the functions for each type of component. Most of the buttons

on the remote have dedicated functions, although the precise codes transmitted vary

depending on the speciﬁc device being controlled. Due to the wide variety of functions

for various source devices, we have included only a few of the most-often used functions

on the remote: alphanumeric keys, transport controls, television-channel control, menu

access and power on and off. Buttons dedicated to the AVR – AVR Power On/Off, Audio

Effects, Video Modes, Surround Modes, Volume, Mute and Sleep Settings – are available

at any time, even when the remote is controlling another device.

Disc Menu button: To display the disc’s menu while a DVD or Blu-ray Disc is playing,

press the Disc Source Selector button, then press this button.

A/B/C/D buttons: These buttons can be used as additional source buttons and can also

operate certain functions when used with some source devices. See Table A13 in the

Appendix for details. These buttons are also used with a Teletext^®-capable television if

your broadcast, cable or satellite provider offers Teletext service.

Volume Up/Down buttons: Press these buttons to raise or lower the volume.

AVR Power On/Off buttons: Press these buttons to turn the AVR on and off. The Main

Power switch on the AVR’s rear panel must be on for this button to work.

Channel Up/Down and Page buttons: When the tuner has been selected, press these

buttons to select a preset radio station. While operating a cable, satellite or HDTV set-top

box or a television, press these buttons to change channels.

IR Transmitter: As buttons are pressed on the remote, infrared codes are emitted

through this opening.

Mute button: Press this button to mute the AVR’s speaker-output connectors and

headphone jack. To restore the sound, press this button or adjust the volume.

Device Power On/Off buttons: Press a device’s Source Selector button, then press

these buttons to turn the device on and off.

Transport Control buttons: These buttons are used to control source devices.

Source Selector buttons: Press one of these buttons to select a source device, e.g.,

Disc, Cable/Sat, Radio, etc. This action will also turn on the AVR and switch the remote’s

control mode to operate the selected source device.

Info button: Press to display the AVR’s Info Menu, which contains the settings for the

current source.

s The ﬁrst press of the Radio button switches the AVR to the last-used tuner band (AM

or FM). Each successive press changes the band.

AVR button: Press to display the AVR’s Main Menu.

Sleep button: Press this button to activate the sleep timer, which turns off the receiver

after a programmed period of time. Each press increases the time by 10 minutes, up to

90 minutes – ending with the “Sleep Off” message.

s The ﬁrst press of the USB button switches the AVR to the last-used source (USB or

iPod). Each successive press cycles between the two sources.

s The ﬁrst press of the Network button switches the AVR to the last-used source

(Network or vTuner). Each successive press cycles between the two sources.

Learn button (AVR 3700/AVR 370): The AVR 3700/AVR 370 remote is capable of

“learning” individual IR codes from the original remote that came with a source device.

See Program the Remote to Control Your Source Devices and TV, on page 23, for more

information.

Audio Effects button: Press this button to access the Audio Effects submenu, which

allows adjustment of the AVR’s tone and other audio controls. See the Set Up Your

Sources section, on page 26, for more information.

Zone Selector switch: Use this switch to select whether the AVR commands will affect

the main listening area (Zone 1) or the remote zone of a multizone system (Zone 2). For

normal operation, leave the switch in the Zone 1 position.

Video Modes button: Press this button for direct access to the Video Modes submenu,

which contains picture adjustments you can use after you have adjusted the picture

settings on your TV or video display. See the Advanced Functions section, on page 33,

for more information.

Surround Modes button: Press this button to access the Surround Modes submenu.

Select a surround-mode category: Auto Select, Virtual Surround, Stereo, Movie, Music or

Game. When you select the category, it is highlighted and the surround mode changes.

To change the surround mode for the selected category, press the OK button when the

menu line is highlighted and use the Up/Down buttons to select one of the available

surround-mode options. Press the OK button; or press the Back/Exit button to exit the

Surround Modes menu and display the next higher menu in the hierarchy. See the

Advanced Functions section, on page 33, for more information.

Number buttons: Use these buttons to enter numbers for radio-station frequencies or

to select station presets.

Last Channel button: When controlling a cable, satellite or HDTV set-top box or a TV,

press this button to return to the previous television channel.

Activity button: With this button you can program the remote to store up to 11 different

Macros (Activities). (A Macro is a series of commands that are transmitted by a single

button press.) Execute a Macro by pressing this button, followed by the Number button

(or the AVR Power On button) into which you programmed the Macro. See Programming

Macro (Activity) Commands, on page 41, for more information.

Back/Exit button: Press this button to return to the previous menu or to exit the menu

system.

Download from Www.Somanuals.com. All Manuals Search And Download.

Zone 2 Remote Control Functions

(AVR 3700/AVR 370 only)

AVR

Zone 2 Remote Control Functions (AVR 3700/AVR 370 only)

IR Transmitter

Lens

Power Off

Button

Mute Button

Source Selector

Buttons

Sleep Button

AVR Button

Back/Exit

Button

Menu Button

Up/Down/Left/Right

Buttons

OK Button

Volume Up/Down

Buttons

Transport Control

Buttons

Zone Selector

Button

Zone Indicator

Download from Www.Somanuals.com. All Manuals Search And Download.

Zone 2 Remote Control Functions

(AVR 3700/AVR 370 only)

AVR

Zone 2 Remote Control Functions

(AVR 3700/AVR 370 only), continued

By installing an IR receiver in the remote zone of a multizone system and connecting it to

the AVR’s Zone 2 IR Input connector, you can use the Zone 2 remote to control the sound

in the remote zone from within the remote zone.You can use it to control the AVR’s power,

volume and mute functions or to select a source input for the remote zone, and to control

a Harman Kardon source device connected to one of the AVR’s Remote IR Out connectors.

See Connect IR Equipment, on page 22, for more information.

You can also use the Zone 2 remote in the main listening room to control the AVR and

Harman Kardon Blu-ray Disc^™, DVD, CD or tape players. When the Zone 2 remote is in

the Zone 1 control mode (the remote’s Zone Indicator light will turn green), its power,

volume and mute controls will affect only the main listening area. To restore operation

to the remote zone, press the remote’s Zone Selector button so that its Zone Indicator

light turns red.

IR Transmitter lens: As buttons are pressed on the remote, infrared codes are emitted

through this lens.

Power Off button: Press this button to turn the AVR off.

Mute button: Press to mute the AVR’s remote-zone speakers.To restore the sound, press

this button, adjust the volume or turn off the multizone system. Make sure to switch the

remote to Zone 2 mode so that only the remote zone will be affected.

Source Selector buttons: With the remote in Zone 2 mode, press one of these buttons

to select a source device for the remote zone. Pressing the button will also turn on the

multizone system and switch the remote to the selected source device’s control mode.

You may select a different external source device than that for the main room, but not

different tuner bands. If you select the same source as that for the main room, any

commands sent to the source device will affect both zones.

s The ﬁrst press of the Radio button switches the AVR to the last-used tuner band (AM

or FM). Each successive press changes the band.

s The ﬁrst press of the USB button switches the AVR to the last-used source (USB or

iPod). Each successive press cycles between the two sources.

s The ﬁrst press of the Network button switches the AVR to the last-used source

(Network or vTuner). Each successive press cycles between the two sources.

Sleep button: Press this button to activate the sleep timer, which turns off the receiver

after a programmed period of time. Each press increases the time by 10 minutes, up to

90 minutes – ending with the “Sleep Off” message.

AVR button: Press this button to turn on the AVR and select the last-used source. This

button is also used to switch the remote control to AVR control mode.

Back/Exit button: Press this button to return to the previous menu or to exit the menu

system.

Menu button: This button is used within the tuner menus and is also used to display

the main menu on some source devices. To display the AVR’s menu system, press the

AVR button.

Up/Down/Left/Right buttons: These buttons are used to navigate the menu system and

to operate the tuner.

OK button: This button is used to select items from the menu system.

Volume Up/Down buttons: Press to raise or lower the volume level in the remote zone.

Transport Control buttons: These buttons are used to control source devices.

Zone Selector button and Zone Indicator light: Each press of the Zone Selector button

determines whether the AVR commands will affect the main listening area (Zone 1) or

the remote zone (Zone 2). The Zone Indicator light will turn green when Zone 1 has been

selected, and red when Zone 2 has been selected. The Zone Indicator light will also light

up brieﬂy when any button is pressed.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Introduction to Home Theater

Surround Modes

Introduction to Home Theater

There are different theories as to the best way to present surround sound and to

distribute each audio channel’s sounds to the surround-sound system’s speakers.

A variety of algorithms have been developed in an effort to recreate the way we hear

sounds in the real world, resulting in a rich variety of options. Several companies

have developed different surround-sound technologies, all of which can be accurately

reproduced by your AVR:

This introductory section will help you to familiarize yourself with some basic concepts

unique to multichannel surround-sound receivers, which will make it easier for you to set

up and operate your AVR.

Typical Home Theater System

A home theater typically includes an audio/video receiver, which controls the system

and supplies ampliﬁcation for the loudspeakers; a disc player; a source component for

television broadcasts (cable box, satellite dish receiver, HDTV tuner or antenna connected

to the TV); a TV or video display; and multiple loudspeakers.

s Dolby Laboratories: Dolby TrueHD, Dolby Digital Plus, Dolby Digital, Dolby Digital

EX, Dolby Pro Logic^®IIx and IIz.

s DTS: DTS-HD High Resolution Audio, DTS-HD Master Audio, DTS, DTS-ES (Discrete

and Matrix), DTS Neo:6^®, DTS 96/24^™.

Multichannel Audio

s HARMAN International: Logic 7^®, HARMAN virtual speaker, HARMAN headphone.

The main beneﬁt of a home theater system is its ability to produce “surround sound.”

Surround sound uses multiple speakers and ampliﬁer channels to immerse you in the

audio/video presentation for a dramatically increased sense of realism.

s Stereo Modes: Generic modes that expand upon conventional two-channel stereo,

including 5CH and 7CH Stereo.

Appendix Table A12, on page 50, contains detailed explanations of the different surround-

sound options available on your AVR. Digital surround-sound modes, such as the Dolby

Digital and DTS modes, are available only on specially encoded programs, such as those

available via HDTV, DVD and Blu-ray Disc media and digital cable or satellite television.

Other surround modes may be used with digital and analog signals to create a different

surround presentation or to use a different number of speakers. Surround-mode selection

depends upon the number of speakers in your system, the program you are watching or

listening to, and your personal tastes.

Your AVR may have up to seven main speakers connected directly to it, plus a subwoofer.

Each main speaker is powered by its own ampliﬁer channel inside the AVR. A system

with more than two speakers is called a multichannel system.The different main speaker

types in a home theater system are:

s Front Left and Right: The front left and right speakers are used as in a two-channel

system. In many surround-sound modes, these speakers are secondary, while the

main action, especially dialogue, is reproduced by the center speaker.

s Center: When you are watching movies and television programs, the center speaker

reproduces most of the dialogue and other soundtrack information, anchoring it with

the picture. When you are listening to a musical program, the center speaker helps

to create a seamless front soundstage, creating a realistic “you-are-there” listening

experience.

s Surround Left and Right: The surround left and right speakers produce ambient

sounds that help create a realistic and immersive surround-sound environment.

They also help recreate directional sound effects such as aircraft ﬂyovers.

s Surround Back Left and Right: Surround back channel speakers are used with

surround modes such as the Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS-

ES^®(Discrete and Matrix), DTS-HD^™High Resolution Audio, DTS-HD Master Audio^™

and Logic 7^®7.1 modes that are designed for 7.1-channel systems.

s Front Height Left and Right: Your AVR includes Dolby Pro Logic IIz decoding, which

uses the AVR’s Assigned Amp channels as front height channels. The addition of

front height channels – an additional pair of speakers positioned above the front left

and right speakers – produces a surround-sound experience with added depth and

dimension by creating lifelike sound that comes at you from varying heights.

NOTE: You can set up your system to use either surround back speakers or front height

speakers; you cannot use both.

The surround back channel speakers are optional. If your system does not include

surround back left and right speakers, you can set up your AVR with a 5.1-channel

surround-sound system in the main listening area, and you can reassign the surround

back channel ampliﬁers to power loudspeakers located in another room in a multizone

system. (Alternately, you can reassign the surround back channel ampliﬁers to power

front height speakers for use with Dolby Pro Logic IIz. See Manual Speaker Setup, on

page 36, for more information.)

Many people expect the surround speakers to play as loudly as the front speakers.

Although you will calibrate all of the speakers in your system to sound equally loud at the

listening position, most artists use the surround speakers for ambient effects only, and

they create their programs to steer relatively little sound to these speakers.

s Subwoofer: A subwoofer is designed to play only the lowest frequencies (the deep

bass). It augments smaller, limited-range main speakers that are usually used for

the other channels. Many digital-format programs, such as movies recorded in

Dolby Digital, contain a low-frequency effects (LFE) channel that is directed to the

subwoofer. The LFE channel packs the punch of a rumbling train or airplane, or the

power of an explosion, adding realism and excitement to your home theater. Some

people use two subwoofers for additional power and for even distribution of the

sound.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Place Your Speakers

NOTE: In a 7.1-channel system, you must choose to use either surround back speakers

or front height speakers – you cannot use both simultaneously.

Place Your Speakers

Determine the locations for your system’s speakers according to their manufacturer’s

directions and the layout of your listening room. Use the illustrations below as a guide for

7.1-channel and 5.1-channel systems.

Placing the Left, Center and Right Speakers

Place the center speaker either on top of, below or mounted on the wall above or below

the TV or video display screen. Place the front left and right speakers along the circle,

about 30 degrees from the center speaker and angled toward the listener.

To create the most realistic surround-sound environment possible, you should place

your speakers in a circle with the listening position at its center. You should angle each

speaker so it directly faces the listening position. Use the diagrams below as a guide.

Place the front left, front right and center speakers at the same height, preferably at

about the same height as the listener’s ears. The center speaker should be no more than

2 feet (0.6m) above or below the left/right speakers. If you’re using only two speakers

with your AVR, place them in the front left and right positions.

SUB

Placing the Surround Speakers in a 5.1-Channel System

You should place the left and right surround speakers approximately 110 degrees from

the center speaker, slightly behind and angled toward the listener. Alternatively, place

them behind the listener, with each surround speaker facing the opposite-side front

speaker. You should place the surround speakers 2 feet – 6 feet (0.6m – 1.8m) higher

than the listener’s ears.

Placing the Surround Speakers in a 7.1-Channel System

In a 7.1-channel system, place the side surround speakers 90 degrees from the center

speaker, directly to either side of the listening position. Place the surround back left and

right speakers 150 degrees from the center speaker, directly facing the opposite-side

front speaker. You should place all the surround speakers 2 feet – 6 feet (0.6m – 1.8m)

higher than the listener’s ears.

Placing Front Height Speakers in a 7.1-Channel System

Speaker Positioning for 5.1-Channel Systems

Your AVR includes Dolby Pro Logic IIz decoding, which uses the AVR’s Assigned Amp

channels as front height channels. The addition of front height channels – an additional

pair of speakers positioned above the front left and right speakers – produces a surround-

sound experience with added depth and dimension by creating lifelike sound that comes

at you from varying heights.

SUB

We recommend placing front height speakers at least 3 feet (0.9m) higher than the front

left and front right speakers, and directly above or farther apart than the front left and

right speakers.The higher and further apart you place the front height speakers, the more

you should angle them down and in toward the listening position.

NOTE: Your receiver will sound its best when the same model or brand of loudspeaker

is used for all positions.

Placing the Subwoofer

Because a room’s shape and volume can have a dramatic effect on a subwoofer’s

performance, it is best to experiment with placement so that you will ﬁnd the location

that produces the best results in your particular listening room. With that in mind, these

rules will help you get started:

SBL

SBR

s Placing the subwoofer next to a wall generally will increase the amount of bass in

the room.

SUB

s Placing the subwoofer in a corner generally will maximize the amount of bass in

the room.

FHL*

FHR*

s In many rooms, placing the subwoofer along the same plane as the left and right

speakers can produce the best integration between the sound of the subwoofer and

that of the left and right speakers.

s In some rooms, the best performance could even result from placing the subwoofer

behind the listening position.

A good way to determine the best location for the subwoofer is by temporarily placing it in

the listening position and playing music with strong bass content. Move around to various

locations in the room while the system is playing (putting your ears where the subwoofer

would be placed), and listen until you ﬁnd the location where the bass performance is

best. Place the subwoofer in that location.

* FHL and FHR speakers should be at least

3 ft (0.9m) above the FL and FR speakers.

Speaker Positioning for 7.1-Channel Systems

(Top: with Surround Back Speakers; Bottom: with Front Height Speakers)

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Types of Home Theater System Connections

Always connect the colored (+) terminal on the AVR to the (+) terminal on the speaker

(usually red), and the black (–) terminal on the AVR to the (–) terminal on the speaker

(usually black).

Types of Home Theater System Connections

There are different types of audio and video connections used to connect the AVR to your

speakers, your TV or video display, and your source devices. The Consumer Electronics

Association has established the CEA^®color-coding standard.

IMPORTANT: Make sure the ( + ) and ( – ) bare wires do not touch each other or

the other terminal. Touching wires can cause a short circuit that can damage your

receiver or ampliﬁer.

Analog Audio Connection

Front Left/Right

Color

Subwoofer Connections

White/Red

Green

The subwoofer is a speaker dedicated to reproducing only the low (bass) frequencies,

which require more power. To obtain the best results, most speaker manufacturers offer

powered subwoofers that contain their own ampliﬁers. Use a single RCA audio cable to

make a line-level (non-ampliﬁed) connection from the AVR’s Subwoofer connector to a

corresponding input jack on the subwoofer.

Center

Surround Left/Right

Surround Back/Front Height Left/Right

Subwoofer

Blue/Gray

Brown/Tan

Purple

Digital Audio Connection

Coaxial (input or output)

Optical Input

Color

Orange

Black

Gray

Optical Record Output

Although the AVR’s purple subwoofer output looks similar to a full-range analog audio

jack, it is ﬁltered so that only the low frequencies pass through it. Don’t connect this

output to any device other than a subwoofer.

Analog Video Connection

Component Video

Color

Red/Green/Blue

Yellow

Source Device Connections

Composite Video

Audio and video signals originate in source devices (components where a playback

signal originates) such as your Blu-ray Disc or DVD player, CD player, DVR (digital video

recorder) or other recorder, tape deck, game console, cable or satellite television tuner,

an iPod or iPhone (connected to the AVR’s USB port) or an MP3 player. The AVR’s FM/AM

tuner also counts as a source, even though no external connections are needed other

than the FM and AM antennas. Separate connections are required for the audio and video

portions of the source device’s signal, except for digital HDMI connections. The types of

connections you use will depend upon the capabilities of the source device and of your

TV or video display.

Speaker Connections

Speaker cables carry an ampliﬁed signal from the AVR’s speaker terminals to each

loudspeaker. They contain two wire conductors, or leads, that are differentiated in some

way, such as with colors or stripes.

The differentiation helps you maintain proper polarity, without which your system’s low-

frequency performance can suffer. Each speaker is connected to the AVR’s speaker-

output terminals using two wires, one positive (+) and one negative (–). Always connect

the positive terminal on the speaker, which is usually colored red, to the positive terminal

on the receiver, which is colored as indicated in the Connection Color Guide Table, above.

The negative terminals on the speakers and the AVR are black.

Digital Audio Connections – HDMI

There are two types of audio connections – digital and analog. Digital audio signals are

required for listening to sources encoded with digital surround modes, such as Dolby

Digital and DTS, or for uncompressed PCM digital audio. Your AVR has three types of

digital audio connections: HDMI, coaxial and optical. Do not use more than one type of

digital audio connection for each source device. However, it’s okay to make both analog

and digital audio connections to the same source.

Your AVR uses binding-post speaker terminals that can accept bare-wire cables or

banana plugs. Bare-wire cables are installed as shown below:

Your AVR is equipped with seven rear-panel HDMI input connectors, and one HDMI

monitor output connector. (The AVRs also have a front-panel HDMI input connector.) HDMI

technology enables digital audio and video information to be carried using a single cable,

delivering the highest quality picture and sound. If your TV or video display device has an

HDMI input connector, make a single HDMI connection from each source device to the

AVR. Usually, a separate digital audio connection is not required.

1. Unscrew Cap

2. Insert Bare Wire

3. Tighten Cap

The AVR’s HDMI output connection contains an Audio Return Channel (ARC) that carries

a digital audio signal from your TV or video display back to the AVR. It allows you to listen

to HDMI devices that are connected directly to your TV (such as an Internet connection)

without making an additional connection from the device to the AVR. The ARC signal

is active when the TV source is selected. See System Settings, on page 39, for more

information. (The AVR 3700 and AVR 370 have two HDMI output connections.)

Banana plugs are inserted into the hole in the middle of the terminal cap, as shown

below:

A. Tighten Cap

B. Insert Banana Connector into Hole in Cap

The HDMI connector is shaped for easy plug-in (see illustration, below), and HDMI

cable runs are limited to about 10 feet (3m). If your video display has a DVI input and is

HDCP-compliant, use an HDMI-to-DVI adapter (not included), and make a separate audio

connection.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Types of Home Theater System Connections

Digital Audio Connections – Coaxial

Video Connections

Coaxial digital audio jacks are usually color-coded in orange. Although they look like

standard RCA-type analog jacks, you should not connect coaxial digital audio outputs to

analog inputs or vice versa.

Many source devices output both audio and video signals (e.g., Blu-ray Disc, DVD

player, cable television box, HDTV tuner, satellite box, VCR, DVR). In addition to an audio

connection as described above, make a video connection for each of these source

devices. Make only one type of video connection for each device.

Digital Video Connections

If you have already connected a source device to one of the AVR’s HDMI input connectors,

you have automatically made a video connection for that device, since the HDMI cable

carries both digital audio and digital video signals.

Analog Video Connections – Composite Video

Digital Audio Connections – Optical

Your AVR uses two types of analog video connections: composite video and component

video.

Optical digital audio connectors are normally covered by a shutter to protect them from

dust. The shutter opens as the cable is inserted. Optical input connectors are color-coded

using a black shutter, while optical outputs use a gray shutter.

Composite video is the basic connection most commonly available. Both the chrominance

(color) and luminance (intensity) components of the video signal are transmitted using a

single cable. The jack is usually color-coded yellow and looks like an analog audio jack.

Do not connect a composite video jack to an analog audio or coaxial digital audio jack,

or vice versa.

Analog Audio Connections

Two-channel analog connections require a stereo audio cable, with one connector for

the left channel (white) and one for the right channel (red). These two connectors are

attached to each other.

Analog Video Connections – Component Video

Component video separates the video signal into three components – one luminance

(“Y”) and two sub-sampled color signals (“Pb” and “Pr”) – that are transmitted using

three separate cables that are color-coded green (Y), blue (Pb) and red (Pr). Component

video cables that join three separate green, blue and red connectors into a single cable

are sold separately.

For source devices that have both digital and analog audio outputs, you may make both

connections. If you are going to be setting up a multizone system, remember that Zone

2 is an audio-only zone (the AVR does not have a Zone 2 video output). Therefore, make

analog connections for any audio source devices (such as a CD changer) that you will

want available for listening in Zone 2 at all times.

The analog connections also feed the analog record outputs. You may record materials

from Blu-ray Disc recordings, DVDs or other copy-protected sources using only analog

connections. Remember to comply with all copyright laws if you choose to make a copy

for your own personal use.

If your TV or video display has an HDMI connection, we recommend it as the best quality

connection. Your AVR converts composite and component analog video input signals to

the HDMI format, upscaling them to high-deﬁnition 1080p resolution.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Types of Home Theater System Connections

Radio Connections

RS-232 Connector

Your AVR uses separate terminals for the included FM and AM antennas. The FM antenna

uses a 75-ohm F-connector.

Your AVR’s RS-232 serial port may be connected to an external control system to allow

it to transmit control commands to the AVR. The port is bidirectional so that the AVR

can transmit status updates to the control device. Connecting and using the RS-232

port requires considerable technical knowledge and is best left to a professional custom

installer.

The AM antenna connector uses spring-clip terminals. After assembling the antenna as

shown below, press the levers to open the connectors, insert the bare wires into the

openings, and release the levers to secure the wires.The antenna wires are not polarized,

so you can insert either wire into either connector.

Network Connector

The AVR’s Network connector allows you to enjoy Internet radio or content from other

DLNA-compatible devices that are connected to the same network. Use a Cat. 5 or

Cat. 5E Ethernet cable to connect the AVR’s RJ-45 connector to your home network.

USB Port

The AVR can play audio ﬁles from an Apple iOS^®device connected to the USB port,

and allows you to control the iOS device via the AVR remote control. The AVR can also

play MP3 and WMA audio ﬁles from a USB device inserted into the USB port. Insert the

connector or device into the USB port oriented so it ﬁts all the way into the port. You may

insert or remove the connector or device at any time – there is no installation or ejection

procedure.

The USB port on your AVR is also used to perform ﬁrmware upgrades. If an upgrade for

the AVR’s operating system is released in the future, you will be able to download it to the

AVR using this port. Complete instructions will be provided at that time.

IMPORTANT: Do not connect a PC or other USB host/controller to the AVR’s USB

port, or you may damage both the AVR and the other device.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Making Connections

Connect Your Subwoofer

Making Connections

Use a single RCA audio cable to connect the AVR’s Subwoofer connector to your subwoofer

as explained in Subwoofer Connections, on page 14. NOTE: The AVR 3700 and AVR 370

provide connections for two subwoofers. See Manual Speaker Setup: Number of Speakers,

on page XX, for information about activating the two subwoofer outputs. Consult your

subwoofer’s user manual for speciﬁc information about making connections to it.

CAUTION: Before making any connections to the audio/video receiver, ensure

that the AVR’s AC cord is unplugged from the receiver and the AC outlet.

Making connections with the receiver plugged in and turned on could damage

the speakers.

AVR 3700/

AVR 370/AVR 370C

AVR 2700/

AVR 270/

AVR 270C

Connect Your Speakers

After you have placed your loudspeakers in the room as explained in Place Your Speakers,

on page 13, connect each speaker to its color-coded terminal on the AVR as explained

in Speaker Connections, on page 14. Connect the speakers as shown in the illustration.

Connect Surround Back L/R Speakers

-OR- Front Height L/R Speakers Here

Use either

connector

Powered

Subwoofer

Single

RCA Audio

Cable

(not

supplied)

Connect Your TV or Video Display

If your TV has an HDMI connector: Use an HDMI cable (not included) to connect it to the

AVR’s HDMI Monitor Out connector.The AVR 3700 and AVR 370 provide HDMI connections

for two TVs. You do not need to make any other connections to your TV from the receiver

or from any of your video source components.

FHL

FHR

AVR 2700/

AVR 270/

AVR 270C

AVR 3700/

AVR 370/AVR 370C

Use either

connector

SBL

SBR

HDMI Cable

(not supplied)

NOTE: If you installed front height speakers, connect them as shown for the SBL and

SBR speakers.

If your TV does not have an HDMI connector: Use a composite video cable (not

included) to connect the AVR’s Composite Monitor Out connector to your TV’s composite

video connector.

AVR

Composite

Monitor Out

Connector

Composite Video Cable

(not supplied)

NOTE: The HDMI connection to your TV is preferred. If you use the composite video

connection to your TV, you will not be able to view the AVR’s on-screen menus.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Making Connections

However, you can connect your source devices as you wish and re-assign any of the

input connections to any of the Source Buttons listed in the table according to where you

actually connect each of your source devices.

Connect Your Audio and Video Source Devices

Source devices are components where a playback signal originates, e.g. a Blu-ray

Disc™ or DVD player; a cable, satellite or HDTV tuner; etc. Your AVR has several different

types of input connectors for your audio and video source devices: HDMI, component

video, composite video, optical digital audio, coaxial digital audio and analog audio.

The connectors are not labeled for speciﬁc types of source devices; they are labeled

numerically, so you can connect your devices according to your individual system’s

make-up.

As you connect your various source devices, ﬁll out the “Connected Component” column

in the table – it will make it easier for you to assign the various source buttons after

you have completed making all of the connections. (You will make any changes to the

source-button assignments and ﬁll in the “Assigned Connector(s)” column later in the

setup process.)

Note: You cannot assign connectors to the Network, Radio and USB source buttons.

Your AVR’s various source buttons have default assignments to different input connectors

(listed in the “Default Connector(s)” column of the table below). For ease of setup, you

should connect each source device to the connector where the corresponding default

source button is assigned (e.g., connect your Blu-ray Disc player to HDMI 1).

Source Button

Default Connector(s)

Assigned Connector(s)

Connected Device

Disc

Cable/Sat

Game

HDMI 1

HDMI 2

HDMI 3

HDMI 4

Media Server

DVR

HDMI 5

None/Optical Digital Audio 1

HDMI Front

Aux

A (red)

HDMI 6

B (green)

C (yellow)

D (blue)

HDMI 7

Composite Video 1/Analog Audio 1

Composite Video 2/Analog Audio 2

Monitor Output Connector

Connected Device

HDMI Out 1

HDMI Out 2

(AVR 3700/AVR 370 only)

Composite Video Monitor Out

Record Output Connector

Analog Audio Rec Out

Source Buttons and Assigned Connectors

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Making Connections

Connect Your HDMI Devices

Connect Your Composite Video Devices

If any of your source devices have HDMI connectors, using them will provide the best

possible video and audio performance quality. Since the HDMI cable carries both digital

video and digital audio signals, you do not have to make any additional audio connections

for devices you connect via an HDMI cable.

Use composite video connectors for video source devices that don’t have HDMI or

component video connectors. You will also need to make an audio connection from the

source device to the receiver.

AVR Analog

Video Connectors

AVR HDMI Connectors

Composite Video

Cable (not supplied)

HDMI Cable

(not supplied)

To Composite

Video Output

To HDMI

Output

Composite Video-Equipped Source Device

Connect Your Optical Digital Audio Devices

If your non-HDMI source devices have optical digital outputs, connect them to the AVR’s

optical digital audio connectors. NOTE: Make only one type of digital connection (HDMI,

optical or coaxial) from each device.

HDMI-Equipped Source Device

NOTE: If you have HDMI devices (such as an Internet connection) already connected

directly to your TV, you can feed their sound to the AVR via the HDMI Out connector’s

Audio Return Channel, and they will not require additional connections to the AVR.

AVR Digital

Audio Connectors

Connect Your Component Video Devices

If any of your video source devices have component video connectors (and do not have

HDMI connectors), using the component video connectors will provide superior video

performance. You will also need to make an audio connection from the device to the

receiver.

Optical Digital Audio

Cable (not supplied)

AVR Analog

Video Connectors

To Optical Digital

Audio Output

Optical-Equipped Source Device

Component Video

Cable (not supplied)

Connect Your Coaxial Digital Audio Devices

If your non-HDMI source device has a coaxial digital output, connect it to the AVR’s

coaxial digital audio connector. NOTE: Make only one type of digital connection (HDMI,

optical or coaxial) from each device.

To Component

Video Outputs

AVR Digital

Audio Connectors

Component Video-Equipped Source Device

Coaxial Digital Audio

Cable (not supplied)

To Coaxial Digital

Audio Output

Coaxial-Equipped Source Device

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Making Connections

Connect Your Analog Audio Devices

Connect Your Video Recorder

Use the AVR’s analog audio connectors for source devices that don’t have HDMI or digital

audio connectors. NOTE: If you’re installing a multizone system, make analog audio

connections for any source devices you want to be able to listen to in Zone 2. Only analog

sources are available in Zone 2.

Connect an analog video recorder’s video input connector to the AVR’s Composite Monitor

Out connector. You can record any composite video signal. To record the audio from

the source device, connect the AVR’s Analog Rec Out connectors to the analog video

recorder’s audio inputs. NOTE: If you have connected the AVR’s Composite Monitor Out

video connector to your TV you cannot connect a VCR to the AVR for recording.

Receiver Analog

Audio Connectors

AVR Analog

Video Recorder

Connectors

AVR Analog

Audio Recorder

Connectors

Analog Audio/Video

Cable (not supplied)

To Analog

Audio/Video

Record Inputs

Stereo Audio Cable

(not supplied)

To Stereo Analog

Audio Output

Analog Video Recording Device

USB and iOS Devices

Use the AVR’s front-panel USB port to connect an iPod, iPhone or iPad using an Apple

cable (not supplied) or to directly connect a USB memory stick. You can play audio ﬁles

from the device or memory stick and use the AVR’s remote to control playback.

Analog Source Device

Connect Your Audio Recorders

AVR

Front-Panel

USB Port

Connect an analog audio recorder’s inputs to the AVR’s analog audio Rec Out connectors.

You can record any analog audio input signal.

AVR Analog Audio

Recorder Connectors

USB

Memory

Stick

Apple Cable

(not supplied)

Stereo Audio Cable

(not supplied)

To Stereo Analog

Record Inputs

Analog Recording Device

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Making Connections

Connect to Your Home Network

Use a Cat. 5 or Cat. 5E cable (not supplied) to connect the AVR’s Network connector to

your home network to enjoy Internet radio and content from DLNA-compatible devices

that are connected to the network.

Install a Multizone System

IMPORTANT SAFETY NOTE: Installing a multizone system typically requires

running cables inside walls. Always comply with the appropriate safety codes

when installing concealed wiring, particularly all applicable building codes.

Failure to do so may present a safety hazard. If you have any doubt about

your ability to work with electrical wiring, hire a licensed electrician or custom

installer to install the multizone system.

AVR

Network

Connector

Network

Modem

NOTE: Only the following analog audio sources are available to Zone 2: the internal radio,

an iPod/iPhone device or a USB memory device inserted in the AVR’s USB port and up

to two source devices connected to the rear-panel Analog Audio In 1 and 2 connectors.

To Home

Network

and Internet

Cat. 5/5E Ethernet Cable

(not supplied)

Your AVR offers two different methods of distributing audio to other areas in your home.

Each requires different connections:

A. Connect the Zone 2 speakers directly to the Assigned Amp Speaker Output

connectors. Assign the Assigned Amp channels to power the Zone 2 speakers (see

Manual Speaker Setup, on page 36). This method allows you to power a single pair of

speakers for Zone 2.

AVR 3700/AVR 370 only:

If your home network is Wi-Fi^®, attach the supplied Wi-Fi antenna to the AVR. You do not

need to make a wired network connection.

This method offers the beneﬁt of reduced cost and complexity, but your home theater

system will be limited to 5.1 channels – the AVR will automatically downmix the playback

of programs recorded in 6.1 or 7.1 channels to 5.1 channels.

Zone 2

Speakers

Zone 2

Assigned

Amp

Main Room

Speaker

Connectors

Speaker Wire

(not supplied)

Speaker Wire

(not supplied)

Connect the Radio Antennas

s Connect the supplied FM antenna to the AVR’s FM 751 antenna connector. For the

best reception, extend the FM antenna as far as possible.

s Bend and fold the base of the supplied AM antenna as shown and connect the

antenna wires to the AVR’s AM and Gnd connectors. (You can connect either wire to

either connector.) Rotate the antenna as necessary to minimize background noise.

AM Antenna

(supplied)

AVR

Antenna

AVR

Connectors

Bend and fold base

FM Antenna (supplied)

LFE

5.1-Channel

Home Theater

Speaker System

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Making Connections

B. Connect an external ampliﬁer to the AVR’s Zone 2 Out connectors. This method

offers the beneﬁt of retaining a 7.1-channel home theater in the main room simultaneously

with multizone operation, although it does require an additional ampliﬁer for Zone 2.

Connect IR Equipment

The AVR is equipped with Remote IR Input and Output connectors and a Zone 2 IR Input

connector that let you remotely control the AVR in a variety of situations:

We recommend that you place the Zone 2 ampliﬁer in the same room as the AVR so that

you can use a short length of stereo audio cable along with a long run of speaker wire to

the remote room. A long run of stereo audio cable would increase the chance of signal

degradation. Depending on your Zone 2 ampliﬁer you can distribute the audio signal to a

single pair of speakers or to several pairs placed in different rooms.

s When you place the AVR inside a cabinet or facing away from the listener, connect

an external IR receiver, such as the optional Harman Kardon HE 1000, to the AVR’s

IR In jack.

AVR

External IR

Receiver

IR In Jack

Zone 2

Speakers

Zone 2

Main Room

Speaker Wire

(not supplied)

Speaker Wire

(not supplied)

Stereo Audio Cable

(not supplied)

AVR and Source Devices

Installed Inside of Cabinet

Zone 2 Ampliﬁer

(not supplied)

s If any source devices are equipped with a compatible IR input, use a 1/8-inch

(3.5mm) mini-plug interconnect cable (not included) to connect the AVR’s IR Out jack

to the source device’s IR input.

AVR

External IR Receiver

LFE

AVR

7.1-Channel

Home Theater

Speaker System

Mono 1/8-inch

(3.5mm) Mini-Plug

Interconnect

(not supplied)

Source Devices w/Remote In/Out Jacks

Mono 1/8-inch

(3.5mm) Mini-Plug

Interconnect

SBL

SBR

(not supplied)

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Making Connections,

To control more than one source device through the AVR’s IR Remote Out connector,

connect all sources in “daisy chain” fashion, connecting each device’s IR output to the

next device’s IR input, starting with the AVR.

Connect to AC Power

Connect the supplied AC power cord to the AVR’s AC Input connector and then to a

working AC power outlet.

s If you install a multizone system, connect an IR control device to the Zone 2 IR In

connector for remote-room control of the multizone system, source devices and

volume in the remote zone.

AVR

AC Input

Connector

Zone 2 Speakers

External IR Receiver

AC Power

Outlet

Power Cord (supplied)

Zone 2

Main Room

AVR

If a source device is shared with the main listening area, any control commands issued

to that source will also affect the main room.

Connect the Trigger Output

If your system has equipment that can be controlled by a DC trigger signal, connect it to

the AVR’s Trigger Out connector with a mono 1/8-inch (3.5mm) mini-plug interconnect

cable. The AVR will supply a 12V DC (100mA) trigger signal at this connection whenever

it is powered on.

AVR

Mono 1/8-inch

Device with

(3.5mm) Mini-Plug

Trigger In Connector

Interconnect

(not supplied)

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Set Up the Remote Control

4. Aim the remote at the source device and use the remote’s Number buttons to enter a

code number from Step 1, above.

Set Up the Remote Control

a) If the device turns off, press the Source Selector button again to save the code. The

Source Selector button will ﬂash, and the remote will exit the Programming mode.

Install the Batteries in the Remote Control

Remove the remote control’s battery cover, insert the four supplied AAA batteries as

shown in the illustration, and replace the battery cover.

b) If the device does not turn off, enter another code number.

c) If you run out of code numbers for a device, you can search through all of the codes

in the remote’s library for dervices of its type by pressing the remote’s Up button

repeatedly until the device turns off. When it does, press the Source Selector button

to save the code.

5. Check that other functions control the device correctly. Sometimes manufacturers use

the same Power code for several models, while other function codes vary. Repeat this

process until you’ve programmed a satisfactory code set that operates most of the

device’s functions.

6. If you searched through the remote’s code library to ﬁnd the code, you can ﬁnd out

which code number you have programmed by pressing and holding the Source Selector

button to re-enter the Programming Mode.Then press the remote’s OK Button, and the

Source Selector button will ﬂash in the code sequence. One ﬂash represents “1,” two

ﬂashes for “2,” and so forth. A series of quick ﬂashes represents “0.” Record the code

number programmed for each device in Table A9 in the Appendix.

Repeat Steps 3 – 6 for each source device you want to control with the AVR remote.

NOTE: Remove the protective plastic from the AVR’s front panel so it doesn’t reduce the

remote control’s effectiveness.

Reassigning a Source Selector Button for a Different Device Type

Program the Remote to Control Your Source Devices and TV

You can program your AVR remote to control many brands and models of audio/video

source devices and TVs. The remote is also ready to operate your iPod or iPhone when it

is connected to the AVR’s front-panel USB port.

You can reassign a Source Button to control a different device type (for example, you can

program the Media Server button to control a DVD player).

1. Turn on the source device you want the remote to control.

2. Look up the code numbers for the device in Tables A14 – A24 in the Appendix. Write all

the applicable code numbers in a convenient place.

Each of the remote’s Source Selector buttons has been preprogrammed to control certain

types of source devices:

3. Press the Source Selector button you want to override and hold it for three seconds

as it glows red, goes dark and glows red again. Then release it. The remote is now in

the Programming mode.

Cable/Sat: Controls cable TV and satellite TV tuner boxes

Disc: Controls Blu-ray Disc and DVD players

Radio: Controls the AVR’s built-in FM/AM tuner

TV: Controls TVs and video displays

4. Press the Source Selector button that corresponds to the source device’s type (i.e.,

for a DVD player, press the Blu-ray button). The Source Selector button you pressed in

Step 3 will ﬂash once.

USB: Browses compatible media on an Apple iOS device that is connected to, or a USB

device that is inserted in the AVR’s USB port Note: Does not require programming.

5. Aim the remote at the source device and use the remote’s Number buttons to enter a

code number from Step 2, above.

DVR: Controls TiVo^®recorders

a) If the device turns off, press the Source Selector button from Step 3 again to

save the code. The Source Selector button will ﬂash, and the remote will exit the

Programming mode.

Game: Controls video-game consoles

Media Server: Controls media servers

b) If the device does not turn off, enter another code number.

Network: Browses compatible media on DLNA-compatible devices connected to your

home network and on vTuner (Internet Radio). Note: Does not require programming.

c) If you run out of code numbers for a device, you can search through all of the codes

in the remote’s library for devices of its type by pressing the remote’s Up button

repeatedly until the device turns off. When it does, press the Source Selector button

from Step 3 to save the code.

AUX: Controls HDTV tuner boxes, CD players, VCRs and PVDs.

Although the Source Selector buttons are preprogrammed for the device types listed

above, you can reassign a Source Selector button to a different device type. See

Reassigning a Source Selector Button for a Different Device Type, on page 24.

Most of the button labels on the AVR remote describe each button’s function when the

remote is used to control the AVR. However, the button may perform a different function

when used to control another device. Refer to the Remote Control Function List, Table

A13 in the Appendix.

Once you have programmed the remote, you can switch the remote’s control mode to

access the functions for a particular device by pressing the remote’s Source Selector

button for that device.

You can also program the remote to perform Macros (preprogrammed code sequences

that execute many code commands with a single button press), and for “punch-

through” programming (allowing the remote to operate a device’s channel or transport

controls when the remote is in another device’s mode). See Advanced Remote Control

Programming, on page 41, for instructions on these functions.

Follow these steps to program the Source Selector buttons for your source devices:

1. Turn on the source device you want to program the remote to control.

2. Look up the code numbers for the device in Tables A14 – A24 in the Appendix. Write all

the applicable code numbers in a convenient place.

3. Press the Source Selector button for the device and hold it as it glows red, goes dark

and glows red again. Then release it. The remote is now in the Programming mode.

NOTE: The remote will remain in the Programming mode for 20 seconds. If you do not

complete Step 4 within 20 seconds, the remote will exit the Programming mode, and you

will need to repeat Step 3.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Set Up the Remote Control

Learning (AVR 3700/AVR 370 only)

If you have the device’s original remote control, you may “teach” its individual button

codes into the following “destination” buttons on the AVR 3700/AVR 370 remote:

Device Power On/Off buttons, Number buttons, Last button, Back/Exit button, Menu

button, Up/Down/Left/Right buttons, OK button, Disc Menu button, A/B/C/D buttons,

Channel Up/Down buttons, Volume Up/Down buttons, Mute button, Transport Control

buttons.

= Destination Buttons

Learn

Button

1. Place the two remotes with their IR transmitters facing each other, about 1 inch

(25mm) apart.

1 inch

(25mm)

2. Press the AVR remote’s Source Selector button for the source device, then press and

hold the Learn button until the Source Selector button glows red. The remote is now

in the Learning mode.

3. On the AVR remote, choose a destination button that will learn the source device

remote’s function. Press the destination button, and the Source Selector will ﬂash

once.

4. On the source device’s remote, press and hold the button with the function that you

want to teach to the AVR remote until the Source Selector button ﬂashes three times.

The source device remote’s button has now taught the AVR remote’s destination button

to perform its function on that source.

5. You can program additional buttons for this source by repeating Steps 3 – 4. You can

program buttons for other sources by repeating Steps 1 – 4.

When you’re ﬁnished, press the Learn button once to exit the Learning mode, or wait for

the remote to exit the Learning mode on its own after about 30 seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Set Up the AVR

The Main Menu system consists of six submenus: Source Select, Setup Source, Speaker

Setup, Zone 2, System and Settings Lock. Use the Up/Down/Left/Right buttons on the

remote or the front panel to navigate the menu system, and press the OK button to select

a menu or setting line, or to enter a new setting.

Set Up the AVR

In this section, you will conﬁgure the AVR to match your actual system’s makeup.

Although it’s possible to conﬁgure the AVR using only the remote and the messages on

the AVR’s front-panel display, it is easier if you use the full-screen menu system.

The current menu, setting line or new setting will appear in the front-panel Message

Display, as well as on screen.

Turn On the AVR

To return to the previous menu or exit the menu system, press the Back/Exit button. Be

certain all settings are correct, as any changes you have made will be retained.

1. Set the rear-panel Main Power switch to “On.” (The front-panel Power indicator will

glow amber.)

Most users should follow the instructions in this Set Up the AVR section to conﬁgure a

basic home theater system.You may return to these menus at any time to make additional

adjustments, such as those described in the Advanced Functions section, on page 33.

2. Press the front-panel Power button.

Main Power

Switch

Power

Button

Before beginning the following setup steps, all loudspeakers, a video display and all

source devices should be connected. You should be able to turn on the AVR and view the

main menu when you press the AVR button. If necessary, reread the Making Connections

and Set Up the Remote sections before continuing.

Configure the AVR for Your Speakers

1. Plug the supplied EzSet/EQ microphone into the AVR’s Headphone connector.

AVR

Headphone

Connector

Unless you will not be using the receiver for an extended period of time, leave the Main

Power switch set to “On.” When the Main Power switch is turned off, any settings you

have programmed will be preserved for up to four weeks.

IMPORTANT NOTE: If the PROTECT message ever appears in the Message Display,

turn off the AVR and unplug it. Check all speaker wires for a short-circuit (“+” and

“–“ wires touching). If none is found, bring the unit to an authorized Harman Kardon

service center for inspection and repair before using it again.

Using the On-Screen Menu System

EzSet/EQ

Microphone

(supplied)

To access the menu system, press the AVR button on the remote or the Setup button on

the front panel. The Main Menu will appear, and if a video source is playing, it will be

visible behind the menu.

2. Place the microphone at ear height in your listening position. The microphone features

a threaded insert on the bottom for mounting on a camera tripod.

Source Select

Select the Source Device

3. Set the volume control on your subwoofer to approximately the halfway point.

4. Turn on your TV and select the TV input where you connected the AVR in Connect Your

TV or Video Display, on page 17.

Setup Source

Setup Source Devices

Speaker Setup

Speaker Optimization, EQ

Zone 2

Manage and Control Zone 2

System

General AVR Settings

Settings Lock

Manage System Lock

NOTE: When you are using the AVR’s on-screen menu system, we recommend a video

output resolution of 720p or higher for easiest viewing and for graphics that simplify

some conﬁguration options. Depending on the resolution selected, the menus shown by

your system may vary in appearance from the illustrations.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Set Up the AVR

5. Press the remote control’s AVR button. The AVR’s on-screen display (OSD) Main Menu

screen will appear on the TV.

Set Up Your Sources

The Setup Source menu lets you assign the correct physical audio and video connections

to each source and lets you set many audio and video playback features for each source.

IMPORTANT: The “Video Input from Source,” “Audio Input from Source” and

“Resolution to Display” settings are not optional and must be adjusted before

you use your AVR to enable playback of each source. You can adjust the other

settings later. See System Settings, on page 39, for complete information about adjusting

all of the Settings menu options.

Source Select

Select the Source Device

Setup Source

Setup Source Devices

1. Review the assigned connectors you listed on the Source Buttons and Assigned

Connectors table, on page 18. Note what changes (if any) you want to make from the

default source-button connector assignments that appear on the list. (If there are no

changes, you can skip this section.)

Speaker Setup

Speaker Optimization, EQ

Zone 2

Manage and Control Zone 2

2. To display the Source Settings menu for the active source, press the Info button on

the front panel or remote. Or, from the Main Menu screen, select “Setup Source” and

select a source from the slide-in menu. The Settings menu for that source will appear.

System

General AVR Settings

Cable/Sat

Settings Lock

Manage System Lock

Audio Effects

Video Modes:

Off

Auto Select

Surround Modes:

Audio Format from Source:

NO AUDIO INPUT

6. Use the remote’s Up/Down/Left/Right and OK buttons to select “Speaker Setup.”

HDMI 2

Video Input from Source:

Audio Input from Source:

Speaker Setup

Resolution to Display:

Resolution from Source:

HDMI Bypass:

720p – 60Hz

No Input

Off

Automatic Setup – EzSet/EQ

Automated Speaker Setup and EQ

Cable/Sat

Change Name:

Adjust Lip Sync

Manual Setup

Manually Adjust Speaker Settings

3. Select “Video Input From Source” and select the video input connector you want to assign

to the source button. Press the OK button. NOTE: If you select an HDMI connector as the

Video Input from Source, the Audio Input from Source will automatically change to the

same HDMI connector. If you want to use a different audio connection, proceed to step 4.

7. Select “Automatic Setup – EzSet/EQ” and then select “Continue.”

Cable/Sat

8. Select the number of speakers in your system. Select “5.1” if no surround back or

front height speakers are present or if you will be using the Assigned Amp channels

for multizone operation.

HDMI 1

Audio Effects

Video Modes:

Surround Modes:

HDMI 2

HDMI 3

HDMI 4

Off

Auto Select

9. The test will begin. Make sure that the room is quiet while the test noise is playing

through the speakers.

HDMI 5

HDMI 6

HDMI 7

HDMI Front

Component

Composite 1

Audio Format from Source:

No Audio Input

HDMI 2

Video Input from Source:

Audio Input from Source:

10. When the test ﬁnishes, select “Continue,” then select “View Settings” to see the

results of the EzSet/EQ process, or select “Done” to exit.

Resolution to Display:

Resolution from Source:

HDMI Bypass:

1080p – 60Hz

No Video Input

Auto

NOTES:

s If there are fewer than ﬁve main speakers in your system, do not use the EzSet/

EQ process. Instead, proceed as described in Manual Speaker Setup, on page 36.

Cable/Sat

Analog 1

Change Name:

Adjust Lip Sync

s If you are using a 6.1-channel conﬁguration with a single surround back speaker,

use EzSet/EQ automatic conﬁguration for 5.1 speakers, connect the single surround

back speaker to the left Assigned Amp Speaker Output connector, then conﬁgure

the surround back speaker manually, as described in Manual Speaker Setup, on

page 36.

Zone 2 Audio:

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Set Up the AVR

4. Select “Audio Input from Source” and select the audio input connector you want to

assign to the source button. Press the OK button.

We suggest that you create an additional source conﬁguration for each of your 3D video

source devices by assigning each an unused Source Selector button on the AVR’s remote

control. For example, you can assign the AVR’s “Media Server” source as the 3D source

for a 3D-capable disc player or game, and you can assign one of the AVR’s “A/B/C/D”

source buttons as the 3D source for your cable or satellite tuner’s 3D programming.

Cable/Sat

HDMI 4

HDMI 5

HDMI 6

HDMI 7

Audio Effects

Video Modes:

Surround Modes:

Off

Auto Select

Creating “HDMI Bypass” Inputs

HDMI Front

Optical 1

Optical 2

Coaxial

Analog 1

Analog 2

Audio Format from Source:

No Audio Input

In this example, we will program the Media Server source as an HDMI Bypass source for

3D programming:

Component

Coaxial

Video Input from Source:

Audio Input from Source:

1. Select “Setup Source.” The source list will appear.

2. Select “Media Server.” The Media Server setup screen will appear.

3. Select “HDMI Bypass.” A conﬁrmation screen will appear.

4. Select “OK.” The AVR will exit the menu mode.

Resolution to Display:

Resolution from Source:

HDMI Bypass:

1080p – 60Hz

No Video Input

Auto

Cable/Sat

Analog 1

Change Name:

Adjust Lip Sync

Repeat Steps 1 – 4, assigning a new 3D source for each of your 3D-capable source

devices.

Zone 2 Audio:

Notes:

Resolution to Display: This setting reﬂects the video output resolution, which is

dependent upon the capabilities of your TV or video display.

s When using your AVR with these new settings, be sure to press the correct

source selectors for your 2D and 3D sources.

s If you connected your TV to the AVR’s HDMI Monitor Out connector, the two devices

will communicate with each other, and the AVR will automatically select the best

available video output resolution. In almost all cases, you should leave the resolution

set to the AVR’s automatic selection. (You can override this automatic selection if

your video display’s native resolution is different from the AVR’s automatic selection.)

s If you are viewing 3D sources when an HDMI Bypass input is active, the on-

screen indications for volume level will not appear.This is normal, since all video

processing is removed in the HDMI Bypass mode.

s If your video sources are always operating at 720p or higher resolution, you

may ﬁnd the HDMI Bypass mode acceptable for normal 2D viewing as well

as for 3D viewing. In this case, you may ﬁnd it more convenient to use the 3D

sources at all times.

s If you connected your TV to the AVR’s Composite Video Monitor Out connector, you

must set the resolution to “480i” (AVR 3700/AVR 2700) or to “576p” (AVR 370/AVR

270) to view any content.

NOTE: If your connected TV is 4K video capable, the AVR will automatically pass 4K

video sources through to the TV in their native resolution and will upscale non-4K video

sources up to 4K.

s If you see side-by-side or top-and-bottom images while watching a 3D program,

manually switch to the HDMI Bypass mode.

Audio Effects: This submenu allows you to adjust the Dolby Volume and Dolby PLII/IIx/

IIz settings, the bass and treble tone controls, the LFE trim and the Equalization On/Off

setting for each source independently. We suggest leaving this submenu at its default

settings and returning to it later if your system requires ﬁne-tuning. See Audio Effects

Button, on page 34, for more information.

Change Name: This selection lets you change the display name for the source, which

is useful if your source’s device type is different from the source’s preprogrammed

name. Select this line and use the Up/Down buttons to scroll forward or reverse through

the alphanumeric characters. When the desired character appears, use the Left/Right

buttons to move the cursor to the next or previous position. Move the cursor again to

leave a blank space. When you have ﬁnished, press the OK Button. The name will appear

on the AVR’s front panel and throughout the on-screen menu system.

Video Modes: This submenu allows you to make picture adjustments for each source

independently. We suggest leaving the settings at their factory defaults. You should make

picture adjustments to your video display ﬁrst and use this menu only for ﬁne-tuning. See

Video Processing, on page 34, for more information.

Adjust Lip Sync: This selection lets you resynchronize the audio and video signals from

a source to eliminate a “lip sync” problem. Lip-sync issues can occur when the video

portion of a signal undergoes additional processing in either the source device or the

video display. When you make a Lip Sync adjustment, the Lip Sync menu appears by

itself, enabling you to view the video while listening to the audio. Use the Left/Right

buttons to delay the audio by up to 180ms.

Surround Modes: This submenu lets you program surround modes for movies, music

and games for each source independently. Digital surround signals, such as Dolby Digital

and DTS bitstreams, are automatically played in their native formats, although you may

change the surround mode. See Audio Processing and Surround Sound, on page 33, for

more information.

Adjust Lip Sync

Audio Format from Source: This line is informational only. When a digital program is

playing, its format will be identiﬁed here. When analog audio programs are playing, this

line displays ANALOG.

Resolution from Source: This line is informational only. It indicates the resolution of the

Zone 2 Audio: This setting determines the audio source for Zone 2 of a multizone

system. Select the analog audio input the source is connected to. Digital audio is not

available to the multizone system.

video output by the source device.

HDMI Bypass: This setting allows you to bypass the AVR’s internal video processing for

proper display of 3D video content and of source devices (such as some game consoles)

where the AVR's video processing can create delays that can cause synchronization

errors between the sound and picture. There are two available settings:

To conﬁgure the next source, press the Back/Exit button, then return to the Setup Source

line of the Main Menu. When you have ﬁnished conﬁguring all sources, press the Back/

Exit button to clear the menus from view.

s /Nꢀ !LWAYS BYPASSES THE !62gS INTERNAL VIDEO PROCESSINGꢁ

Set Up the Network

s !UTOꢀ !UTOMATICALLY BYPASSES THE !62gS INTERNAL VIDEO PROCESSING WHEN ꢂ$ CONTENT IS

detected.

To play MP3 or WMA media located on DLNA-compatible devices connected to the

network, use the AVR’s internal Internet radio tuner or listen to sources via AirPlay, the

AVR must be connected to your home network and you must join them with the network.

(If your home network is Wi-Fi, the AVR 3700 and AVR 370 can connect to it wirelessly.)

IMPORTANT: Once the AVR automatically switches into the bypass mode upon detecting

3D video content, it will not automatically switch out of the bypass mode when it detects

conventional 2D video content. To turn the HDMI Bypass off you must cycle the AVR into

the Standby mode and then turn it on again.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Set Up the AVR

Wired Network Setup

The following options appear in the Wireless Setup menu:

If your network uses an automatic IP address, you should not have to perform any

network setup procedures for a wired network connection. Once you connect the AVR to

your home network, the network should automatically assign the AVR an IP address, and

the AVR should automatically connect to your network.

s Search AP: Select this option to display and select the wireless network you wish

to join.

s Information: Select this option to display the settings information for the active

wireless network. This screen is informational only – you cannot make changes in

the network settings from it.

If your AVR does not automatically connect to your network (in which case the AVR will

display a “Not Connected” message when you press the Network source button):

s iPod Network Setup: Selecting this option lets you use your portable device with iOS

5 or later to automatically have the AVR join the same wireless network to which

the device is already connected. See Using your iOS 5 device to join the wireless

network, below, for details.

1. Press the AVR button, select System, then select Network Settings. The Wired/Wireless

selection screen will appear.

2. Select Wired. The Wired Network Settings menu will appear.

s AVR AP Mode: This option provides an alternate method for connecting to a wireless

network without using the AVR’s on-screen display.

Network Settings

NOTE: If you have already made a connection to a wired network you will not be able to

select the Wireless setting. Disconnect the AVR from the wired network and begin again

at Step 1.

Mac

0x:00:0x:00:0x:0x

Network Settings:

IP Address:

Subnet Mask:

Gateway:

Primary DNS:

Secondary DNS:

Proxy

Automatic

000 . 000 . 000 . 000

Off

3. Select Search AP and select the network you wish to join from the ones displayed. The

Enter Password screen will appear.

4. Use the remote’s up and down arrow buttons to select each character in your Wi-Fi

network’s password. (The characters will appear on the AVR’s front-panel display and

the OSD screen.) When you have selected the correct character, use the right arrow

button to move to the next one. If you make a mistake, use the left arrow button to

change a previous character.

000.000.000.000

00000

IP Address:

Proxy Port:

5. Once the correct password is displayed on the AVR’s front-panel display and the OSD

screen, press the OK button. The AVR will attempt to join the network.

Network Status:

Apply & Save

Connected

6. When the AVR has successfully joined the network it will display “Connection Success”

on its front-panel display and OSD.

s If the AVR is not able to join the network it will display “Connection Failure.” If this

happens, conﬁrm that you entered the correct password, attempt to connect to

another wireless network or make a wired network connection.

3. Select Network Settings, the press the OK button twice to cycle the setting from

“Automatic” to “Manual” and back to “Automatic.”

4. Select Apply & Save. The AVR will attempt to connect to the network.

Using your iOS 5 device to join the wireless network:

5. If the AVR again fails to connect to the network, you may need to enter your network’s

settings manually. See Network Settings (under General AVR Settings), on page 40, for

complete instructions. You may need to obtain your network’s settings from your ISP

or network administrator.

1. Make sure that your iOS 5 device is joined with the wireless network you want the

AVR to join.

2. Connect your iOS 5 device to the AVR’s front-panel USB port.

NOTE: We recommend that you directly connect the AVR to a home-network router so

that it can directly access the Internet for Internet radio, or access a PC on the network

for playback of content stored on the PC (see Listening to Media via Your Home Network,

on page 32, for more information).

3. The iPod Network Setup option described in Step 2, above, will become available.

Select it.

4. The AVR will automatically join the network without requiring further input from you.

Wireless Network Setup (AVR 3700/AVR 370)

If you want to join the AVR to your Wi-Fi network you will need to perform the following

setup procedure.

1. Press the AVR button, select System, then select Network Settings.The Wired/Wireless/

Network Upgrade selection screen will appear.

2. Select Wireless. The Wireless Network Settings menu will appear.

Network Settings

Search AP

Information

iPod Network Setup

AVR AP Mode

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Operating Your AVR

After you highlight the Dolby Volume setting, each press of the OK button will switch to

one of the options in the table below. The settings do not refer to the volume level, which

is adjusted normally using the AVR’s Volume Control, but rather to the amount of Dolby

Volume processing desired.

Operating Your AVR

Now that you have installed your components and completed a basic conﬁguration, you

are ready to begin enjoying your home theater system.

HARMAN AVR App

Setting

Off

Effect

For easy control of your AVR with your hand-held device, download the free Harman

Kardon AVR app from iTunes App Store for compatible Apple products, or from Google

Play for compatible Android powered smartphones and tablets.

No Dolby Volume processing

Only Dolby Volume Modeler module is active

Low

The Harman Kardon AVR App controls virtually all the functions of AVR 3700, AVR 370,

AVR 2700 and AVR 270 receivers that are connected to the same network as the device

that has the app installed.With this easy-to-use app you can turn the AVR on or off, select

a source, control the volume and virtually any other function. You can also access and

navigate all of the AVR’s on-screen setup menus.

Both Modeler and Leveler modules are active;

Leveler module has a value of 3

Medium

Max

Both Modeler and Leveler modules are active;

Leveler module has a value of 9

Controlling the Volume

NOTE: Dolby Volume processing is compatible with sources recorded at a sampling

rate of 48kHz. High-resolution sources, such as DTS 96/24 programs, will be

decoded at 48kHz. DTS 96/24 programs will be played in DTS 5.1 mode. To hear

DTS 96/24 materials in high resolution, turn off Dolby Volume processing.

Adjust the volume either by turning the front-panel Volume knob (clockwise to increase

volume or counterclockwise to decrease volume) or by pressing the Volume Up/Down

buttons on the remote. The volume is displayed as a negative number of decibels (dB)

below the 0dB reference point (-90dB – +10dB).

0dB is the maximum recommended volume for your AVR. Although it’s possible to turn

the volume to a higher level, doing so may damage your hearing and your speakers. For

certain more dynamic audio materials, even 0dB may be too high, allowing for damage

to equipment. Use caution with regard to volume levels.

Dolby Volume Calibration

Dolby Volume calibration allows you to adjust the operation of the Dolby Volume

circuitry to match your particular speakers and listening environment. The Dolby Volume

circuitry in your AVR is factory-calibrated with average speaker sensitivity in mind;

however, different speakers may have different sensitivities, which will affect the overall

performance of the Dolby Volume circuitry. Use Dolby Volume calibration to adjust the

calibration of the circuitry according to the speciﬁc speakers you have.

To change the volume level display from the default decibel scale to a 0-to-90 scale,

adjust the Volume Units setting in the System Settings menu, as described in System

Settings, on page 39.

Muting the Sound

To mute all speakers and the headphones, press the Mute button on the remote. Any

recording in progress will not be affected. The MUTE message will appear in the display

as a reminder. To restore the sound, press the Mute button again, or adjust the volume.

The average home audio speaker sensitivity is 88dB SPL (1 watt/1 meter). Check the

sensitivity speciﬁcation for your loudspeakers, found in the owner’s manual or on the

manufacturer’s Web site. If your speakers have a sensitivity rating greater than 88dB SPL,

increase Dolby Volume calibration by the difference between your speakers’ sensitivity

and 88dB. If they have a sensitivity rating of less than 88dB SPL, decrease Dolby Volume

calibration by the difference between your speakers’ sensitivity and 88dB.

Dolby Volume

To adjust the Dolby Volume calibration, press the AVR button and select the “System”

menu. Scroll to the Dolby Volume calibration line, which defaults to 0dB. Use the Left/

Right buttons to adjust the setting within the range of –10dB to +10dB.

YourAVR implements DolbyVolume processing,which can improve the audio performance

of the system by revealing subtle details in the sound, even at normal home-listening

volumes.

One concern of the typical home theater listener is that volumes can vary widely for

different programs played by a source (e.g., television commercial advertisements are

often much louder than the main program). Another is that details heard in the recording

studio at typically high reference volumes are lost at the lower volumes used by many

listeners at home.

Listening Through Headphones

Plug the 1/4-inch stereo plug on a pair of headphones into the front-panel Phones jack

for private listening. The default Headphone Bypass mode delivers a conventional two-

channel signal to the headphones. Press the Surround Modes button on the front panel

or the remote to switch to HARMAN headphone virtual surround processing, which

emulates a 5.1-channel speaker system. No other surround modes are available for the

headphones.

The AVR uses two Dolby Volume techniques to address these issues. The Leveler module

maintains a consistent listening volume within a source (e.g., commercial television or

different tracks on a USB drive or mix CD). The Modeler module endeavors to re-create

the reference presentation that was heard in the recording studio without losing portions

of the program at the typically lower volume levels often used in the home. When the

Modeler module is active, you may notice details of the performance that were hidden

when the program was played on other equipment.

To adjust the Dolby Volume setting, press the Audio Effects button. The Audio Effects

submenu will appear.

Audio Effects – Cable/Sat

Dolby Volume:

Medium

Low

PLIIz Height Gain:

Edit: Dolby PLII Music

Edit: Dolby PLIIx Music

Tone Control:

Treble:

Bass:

Off

LFE Trim:

EZSET/EQ:

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Operating Your AVR

Selecting a Source

Listening to FM and AM Radio

There are three different ways to select a source:

Select the Radio source. A screen similar to the one in the illustration below will appear.

s Press the front-panel Source List button. Use the Up/Down buttons to scroll through

the sources, and press the OK button to select the source being displayed.

s Using the on-screen menus, press the AVR button, highlight “Source Select” and

press the OK button. Scroll to the desired source in the slide-in menu and press the

OK button.

AM/FM Radio

s You can directly select any source by pressing its Source Selector button on the

remote.

FM 87.50 ^MHz

Auto

The AVR selects the audio and video inputs assigned to the source, and any other settings

you made during setup.

The source name, the audio and video inputs assigned to the source, and the surround

mode will appear on the front panel.The source name and active surround mode will also

brieﬂy appear on the TV screen.

Menu:

Set Presets:

Presets:

Use the Up/Down buttons or the Remote’s Channel buttons to tune a station as displayed

on the front panel and on-screen display.

Video Troubleshooting Tips

The AVR defaults to automatic tuning, meaning each press of the Up/Down buttons scans

up or down the frequency band until a station with acceptable signal strength is found.

To switch to manual tuning, in which each press of the Up/Down buttons steps through

a single tuning frequency increment, press the remote’s Menu button. A slide-in menu

will appear. Select “Mode,” and press the OK button to toggle between automatic and

manual tuning modes.

If there is no picture:

s Check the source selection and video input assignment.

s Check all connections for a loose or incorrect connection.

s Check the video input selection on the TV/display device.

s Press the front-panel Resolution button and use the Up/Down buttons until the

correct video output resolution is selected and a picture appears. The CANCEL

message will also appear. Press the Down button to view the ACCEPT option,

then press the OK button.

Once you have tuned an FM station, toggling the Mode setting also switches the radio

between stereo and monaural reception. (Mono reception may improve reception of

weaker stations.)

Preset Stations

Additional Tips for Troubleshooting HDMI Connections

You can store a total of 30 stations (AM and FM combined) as presets. When you want

to save the currently tuned station as a preset, press the OK button, and two dashes will

ﬂash. Use the Number buttons to enter the desired preset number.

s Turn off all devices (including the TV, the AVR and any source components).

s Unplug the HDMI cables, starting with the cable between the AVR and the TV,

and continuing with the cables between the AVR and each source device.

To tune to a preset station:

s Carefully reconnect the cables from the source devices to the AVR. Connect the

cable from the AVR to the TV last.

s Press the Left/Right buttons.

s Press the skip forward/skip backward Transport Control buttons.

s Press the Menu button and scroll to the desired preset, then press the OK button.

s Turn on the devices in this order: TV, AVR, source devices.

NOTE: Depending upon the particular components involved, the complexity of

the required communication between HDMI components may cause delays of

up to a minute in the completion of some actions, such as input switching or

switching between SD and HD channels.

s Enter the preset number using the Number buttons. For presets 10 through 30, press

0 before the preset number. For example, to enter preset 21, press 0-2-1.

Listening to Media on a USB Device

Your AVR is compatible with MP3 and WMA media.

MP3 compatibility: Mono or stereo, contstant bit rates (CBR) from 8kbps to 320kbps,

variable bit rates (VBR) from lowest to highest quality, with sample rates from 8kHz –

48kHz.

WMA compatibility: Ver. 9.2, stereo CBR with 32kHz – 48kHz sampling rate and 40kbps

– 192kbps bit rate, mono CBR with 8kHz – 16kHz sampling rate and 5kbps – 16kbps bit

rate, VBR Pass Encoding and Quality Encoding 10 – 98, 44kHz and 48kHz sampling rate.

No other types of media can be played.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Operating Your AVR

Playing files on a USB device

Listening to an iPod/iPhone/iPad Device

1. Insert the USB drive into the AVR’s front-panel USB port.

When an iPod, iPhone or iPad device is connected to the AVR’s front-panel USB port, you

may play audio ﬁles through your high-quality audio system, operate the iPod, iPad or

iPhone using the AVR remote or the AVR’s front-panel controls, view navigation messages

on the AVR’s front panel or a connected video display and charge the iPod, iPad or iPhone.

For the latest compatibility information, please see our Web site: www.harmankardon.com.

IMPORTANT: Do not connect a personal computer or peripheral to the USB port. USB

hubs and multi-card readers are not supported.

2. Select the USB Source Selector button on the remote. “USB” will appear on the front-

panel display, and the USB screen and the slide-in menu will appear.

Press the USB source selector button on the remote until the front-panel display’s “iPod”

as the source. The iPod screen will appear and the slide-in menu will automatically

appear.

USB

Browse USB

Repeat Music: Off

iPod

Music

Repeat Music:Off

Shuffle Music:Off

Menu:

3. Select “Browse USB.” The AVR will list the folders located on the drive.

4. Select a folder and press the OK button. The AVR will list all compatible audio ﬁles.

The table below summarizes the controls available during normal playback via the USB

port.

5. Select a ﬁle to begin playback. The USB play screen will appear. Any ID3 information

and album art will be displayed, along with the track’s elapsed/current time and icons

indicating the current playback status.

iPod or iPhone Function

Play

Remote Control Key

Play

USB

Pause

Back/Exit

Back/Exit or Left Arrow

OK or Right Arrow

Up Arrow

Night Crazy

Jugalbandi

Night Crazy

Select

06:16

Scroll Reverse

Scroll Forward

Forward Search

Reverse Search

Next Track

Down Arrow

Forward Search

Reverse Search

Skip Forward or Right Arrow

Skip Backward or Left Arrow

Page Up/Down

Menu:

NOTES:

s To skip to the next track, press the Right button; to return to the previous track, press

Previous Track

Page Up/Down

the Left button once.

s You can use the Transport Control buttons to control playback (skipping to the

previous or next track, searching at high speed forward or backward within a track,

playing a ﬁle, pausing playback or stopping playback).

While scrolling, hold the button to scroll faster. Use the Page Up/Down control on the

remote to scroll a page at a time.

s To repeat a ﬁle or folder, press the Menu Button and select the Repeat option. Each

press of the OK Button will change the setting from Off (no repeat) to Repeat One

(ﬁle) to Repeat All (ﬁles at the current directory level of the drive). Repeat All will

always be activated when Random Music playback is turned on.

While a selection is playing, the album, artist, song title, track elapsed time, total track

time and play mode icon will appear on the front-panel Message display.

s To play the audio tracks in random order, press the Menu button and select the

Random Music setting. Each press of the OK button turns the setting on or off. The

AVR will automatically repeat the tracks until playback is stopped manually.

s To collapse a folder or return to the previous menu level, press the Back/Exit button

or the Left button.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Operating Your AVR

If a video monitor is connected to the AVR and the system is not in iPod manual mode,

an iPod screen will appear and display the play mode icon, song title, artist and album. A

graphic bar indicates the current play position within the track. If random or repeat play

has been programmed, an icon will appear in the upper right corner.

Listening to vTuner (Internet Radio)

Your AVR’s Network connection brings you a world of MP3- and WMA-format streams via

the Internet.After you have successfully connected to your home network as described in

Connect to Your Home Network, on page 20, and set up the network as described in Set

Up the Network, on page 27, press the Network Source Selector button on the remote.

Each press toggles between the Network and vTuner screens.

iPod

Music

Repeat Music:Off

Shuffle Music:Off

vTuner

Jugalbandi - Night Crazy

Laut fm Progman

Menu:

11:43

The screen may disappear from view, depending on the Setup and Slide-In Menus setting

in the System Settings menu (described in System Settings, on page 39). You can restore

the Now Playing screen to view by pressing either of the Left or Right buttons.

Menu:

With the vTuner screen (above) displayed, the AVR will automatically connect to the

Internet via the www.radioharmankardon.com portal. To select a stream, press the Menu

button, and use the Up/Down buttons to search by category: Presets, My Favourites,

Added Stations, Location, Genre, Podcasts by Location, Podcasts by Genre, New Stations,

Most Popular Stations, Recently Played and Search. NOTE: The categories displayed may

vary by region.

CAUTION: We strongly recommend that you use the screen saver built

into your video display to avoid possible damage from “burn-in” that may

occur with plasma and many CRT displays when a still image, such as a

menu screen, remains on the display for an extended period of time.

Press the Menu button to view the slide-out menu:

To create a Favourites list, log onto www.radioharmankardon.com from your computer.

Enter your AVR’s Mac address as its ID # (the Mac address is on the Network Settings

screen in the System Settings menu) and create an account. Favourites that you select

on the Web site will be available on the AVR.

Music: Select this to navigate the audio materials stored on the iPod, iPad or iPhone. Use

the Page up/down buttons on the remote to scroll through the content a page at a time.

NOTE: You can only play audio content via the USB port.

Navigation is similar to other slide-in menus. Scroll to the desired item and press the OK

button to select it. To return to the previous menu level (or to clear the top-level menu

from view), press the Back/Exit button or the Left button.

Repeat Music: Select this setting to repeat a track or all tracks in the current album

or playlist. Each press of the OK button switches the setting: repeat Off, repeat One or

repeat All.

If you know the URL (Web address) of a speciﬁc audio stream, select the Direct Station

option from the menu.A live stream is required.The AVR is not able to connect to streams

that require site registration or other interaction prior to playing the stream. If the AVR

cannot connect to the stream, a “Station Not Live” message will appear brieﬂy, and the

Internet Radio screen will remain essentially blank. Not all URLs will be accessible.

Shufﬂe Music: Select this setting to play all the available songs in random order. Each

press of the OK button switches the setting: shufﬂe by Song, shufﬂe by Album, or Off to

end shufﬂe playback.

NOTE: The iTunes application allows you to exempt some tracks from Shufﬂe mode. The

AVR cannot override this setting.

Listening to Media via Your Home Network

Your AVR is DLNA-compatible and can access MP3 and WMA audio media that is stored

on other DLNA-compatible devices that are connected to the same network as your AVR.

DLNA is a ﬁle sharing protocol that creates a bridge between the AVR and other devices

on the same network that contain audio media. DLNA is supported by PCs that have

Windows Media Player, Windows Media Center or Intel Media Server ﬁle sharing. Apple

computers can also share ﬁles via DLNA using HARMAN Music Manager software, which

can be downloaded without charge from www.harmankardon.com. (Third-party software

that enables DLNA ﬁle-sharing also is available.)

MP3 compatibility: Mono or stereo, contstant bit rates (CBR) from 8kbps to 320kbps,

variable bit rates (VBR) from lowest to highest quality, with sample rates from 8kHz –

48kHz.

WMA compatibility: Ver. 9.2, stereo CBR with 32kHz – 48kHz sampling rate and 40kbps

– 192kbps bit rate, mono CBR with 8kHz – 16kHz sampling rate and 5kbps – 16kbps bit

rate, VBR Pass Encoding and Quality Encoding 10 – 98, 44kHz and 48kHz sampling rate.

Before you can access ﬁles located on other devices via the network, each device

must ﬁrst give permission to share ﬁles with the AVR:

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Operating Your AVR

To share media on PCs:

Stereo: When you want two-channel playback, select the number of speakers you want

to use for playback:

1. Open Windows Media Player.

s “2 CH Stereo” uses two speakers.

2. Open the Library menu and select Media Sharing. The Media Sharing window will

appear.

s “5 CH Stereo” plays the left-channel signal through the front left and surround

left speakers, the right-channel signal through the front right and surround right

speakers, and a summed mono signal through the center speaker.

3. Check the “Share My Media” box. An icon for the AVR will appear in the window.

4. Select the AVR icon, select “Allow,” then select “OK.”

s “7 CH Stereo” follows the same scheme as 5 CH Stereo but adds the surround

back left and surround back right speakers. This mode is available only when the

surround back speakers are present and have not been reassigned to multizone or

front height operation. See Audio Processing and Surround Sound, on page 33, for

more information.

The computer’s WMA and MP3 media should now be available to the AVR.

To share media on other types of computers, operating systems or media software:

Check the instructions for the computer, operating system or media player.

To listen to shared media, press the Network Source Selector button. (If vTuner appears

as the source, press the button a second time to switch from the Internet Radio source to

the Network source.) The Network screen will appear.

Movie: Select from the following when you want a surround mode for movie playback:

Logic 7 Movie, DTS Neo:6 Cinema or Dolby Pro Logic II (IIx or IIz when seven main

speakers are present).

Music: Select from the following when you want a surround mode for music playback:

Logic 7 Music, DTS Neo:6 Music or Dolby Pro Logic II (IIx or IIz when seven main speakers

are present). The Dolby Pro Logic II/IIx/IIz Music mode allows access to a submenu with

some additional settings. See Audio Processing and Surround Sound, on page 33, for

more information.

Network

Beanwater Junction

Video Game: Select from the following when you want a surround mode for game

playback: Logic 7 Game or Dolby Pro Logic II (IIx/IIz when seven main speakers are

present) Game.

Jugalbandi

Night Crazy

1.50

After you have made your selection, press the Back/Exit button.

See Audio Processing and Surround Sound, on page 33, for more information on surround

modes.

Menu:

Audio Effects

Press the Menu button, and the slide-in menu should list by name all devices that allow

sharing. Use the slide-in menu to browse the content stored in the device’s media player

library. Scroll to the desired item and press the OK button to select it. To return to the

previous menu level (or to clear the menu from view from the top level), press the Back/

Exit button or the Left button.

The Audio Effects buttons on the front panel and remote provide settings that let you

adjust the Dolby Volume setting, tone controls, LFE trim or EZ Set, Equalization On/Off

setting. We recommended that you leave these settings at their default values until you

are more familiar with your system. See Audio Effects Button, on page 34, for complete

information.

NOTE: Although video content may appear in the menu, the AVR does not support video

playback from the network connection.

Video Modes

The Video Modes buttons on the front panel and remote provide settings that let you

use the AVR’s video processor to ﬁne-tune the picture, if necessary, after making all

adjustments on the video display. We recommend that you leave the settings at their

defaults until you are completely familiar with the video performance of your system. See

Video Processing, on page 34, for complete information.

Selecting a Surround Mode

Selecting a surround mode can be as simple or sophisticated as your individual system

and tastes. Feel free to experiment, and you may ﬁnd a few favorites for certain sources

or program types. You can ﬁnd more detailed information on surround modes in

Audio Processing and Surround Sound, on page 33.

To select a surround mode, press the Surround Modes button (front panel or remote). The

Surround Modes menu will appear.

Surround Modes – Cable/Sat

Auto Select – AVR Selects Best Mode

Virtual Surround – For Two Speaker Systems

Stereo:

2 CH Stereo

Movie:

Music:

Video Game:

Logic 7 Movie

Logic 7 Music

Logic 7 Game

Press the Up/Down buttons repeatedly until the desired surround-mode category

appears:Auto Select, Virtual Surround, Stereo, Movie, Music or Video Game. Press the OK

button to change the surround-mode category.

Auto Select: For digital programs, such as a movie recorded with a Dolby Digital or DTS

soundtrack, the AVR will automatically use the soundtrack’s native surround format. For

two-channel analog and PCM programs, the AVR uses the Logic 7 Movie, Logic 7 Music

or Logic 7 Game mode, depending on the source.

Virtual Surround: When only two main speakers are present in the system, you can use

HARMAN Virtual Surround to create an enhanced soundﬁeld that virtualizes the missing

speakers. Select between Wide and Reference modes.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Advanced Functions

The second number indicates whether any surround channels are present: “0” indicates

that no surround information is present. “1” indicates that a matrixed surround signal is

present. “2” indicates discrete left and right surround channels. “3” is used with DTS-ES

bitstreams to represent the presence of the discrete surround back channel, in addition

to the side surround left and right channels. “4” is used with 7.1-channel digital formats

to indicate the presence of two discrete side surround channels and two discrete back

surround channels.

Advanced Functions

Much of the adjusting and conﬁguration your AVR requires is handled automatically, with

little intervention required on your part. You can also customize your AVR to suit your

system and your tastes. In this section we will describe some of the more advanced

adjustments available to you.

Audio Processing and Surround Sound

Audio signals can be encoded in a variety of formats that can affect not only the quality

of the sound but the number of speaker channels and the surround mode. You may also

manually select a different surround mode, when available.

The third number is used for the LFE channel: “0” indicates no LFE channel. “.1”

indicates that an LFE channel is present.

The 6.1-channel signals – Dolby Digital EX and DTS-ES Matrix and Discrete – each

include a ﬂag that signals the receiver to decode the surround back channel, indicated

as 3/2/.1 EX-ON for Dolby Digital EX materials, and 3/3/.1 ES-ON for DTS-ES materials.

Analog Audio Signals

Dolby Digital 2.0 signals may include a Dolby Surround ﬂag indicating DS-ON or DS-OFF,

depending on whether the two-channel bitstream contains only stereo information or a

downmix of a multichannel program that can be decoded by the AVR’s Dolby Pro Logic

decoder. By default, these signals are played in Dolby Pro Logic IIx Movie mode.

Analog audio signals usually consist of two channels – left and right. Your AVR is able to

process two-channel audio signals to produce multichannel surround sound, even

when no surround sound has been encoded in the recording. Among the available

modes are the Dolby Pro Logic II/IIx/IIz, HARMAN Virtual Speaker, DTS Neo:6, Logic

7, 5 CH and 7 CH Stereo modes. To select one of these modes, press the Surround

Modes button.

When a PCM signal is received, the PCM message and the sampling rate (32kHz,

44.1kHz, 48kHz or 96kHz) will appear.

When only two channels – left and right – are present, the analog surround modes

may be used to decode the signal into multiple channels. If you would prefer a different

surround format than the native signal’s digital encoding, press the Surround Modes

button to display the Surround Modes menu (see Selecting a Surround Mode, on page

32).

Digital Audio Signals

Digital audio signals offer greater ﬂexibility and capacity than analog signals, and

allow the encoding of discrete channel information directly into the signal. The result is

improved sound quality and startling directionality, since each channel’s information is

transmitted discretely. High-resolution recordings sound extraordinarily distortion-free,

especially in the high frequencies.

The Auto Select option sets the surround mode to the native signal’s digital encoding,

e.g., Dolby Digital, DTS, Dolby TrueHD or DTS-HD Master Audio. For two-channel

materials, the AVR defaults to the Logic 7 Movie mode. If you prefer a different surround

mode, select the surround-mode category: Virtual Surround, Stereo, Movie, Music or

Video Game. Press the OK button to change the mode.

Surround Modes

Surround-mode selection depends upon the format of the incoming audio signal as well

as your personal taste. Although there is never a time when all of the AVR’s surround

modes are available, there is usually a wide variety of modes available for a given input.

Table A12 in the Appendix, on page 50, offers a brief description of each mode and

indicates the types of incoming signals or digital bitstreams the mode may be used with.

Additional information about the Dolby and DTS modes is available on the companies’

Web sites: www.dolby.com and www.dtsonline.com.

Each surround-mode category is set to a default surround mode:

s Virtual Surround: HARMAN virtual speaker.

s Stereo: 7-CH Stereo or 5-CH Stereo (depending on how many main speakers are

present in the system).

s Movie: Logic 7 Movie.

s Music: Logic 7 Music.

s Video Game: Logic 7 Game.

When in doubt, check the jacket of your disc for more information on which surround

modes are available. Usually, nonessential sections of the disc, such as trailers, extra

materials or the disc menu, are available only in Dolby Digital 2.0 (two-channel) or

PCM two-channel mode. If the main title is playing and the display shows one of these

surround modes, look for an audio or language setup section in the disc’s menu. Also,

make sure your disc player’s audio output is set to the original bitstream rather than

two-channel PCM. Stop play and check the player’s output setting.

You may select a different mode for each category. Below is a complete list of available

surround modes. (The actual surround modes available will depend on the number of

speakers in your system.)

s Virtual Surround: HARMAN virtual speaker.

Multichannel digital recordings are produced in ﬁve-channel, six-channel or seven-

channel formats, with or without a “.1” channel. The channels included in a typical

5.1-channel recording are front left, front right, center, surround left, surround right and

LFE (low-frequency effects).The LFE channel is denoted as “.1” to represent the fact that

it is limited to the low frequencies. 6.1-channel recordings add a single surround back

channel, and 7.1-channel recordings add surround back left and surround back right

channels to the 5.1-channel conﬁguration. New formats are available in 7.1-channel

conﬁgurations. Your AVR is able to play the new audio formats, delivering a more exciting

home theater experience.

s Stereo: 2-CH Stereo, 5-CH Stereo or 7-CH Stereo.

s Movie: Logic 7 Movie, DTS Neo:6 Cinema, Dolby Pro Logic II Movie, Dolby Pro Logic

IIx Movie, Dolby Pro Logic IIz.

s Music: Logic 7 Music, DTS Neo:6 Music, Dolby Pro Logic II Music, Dolby Pro Logic

IIx Music, Dolby Pro Logic IIz.

s Video Game: Logic 7 Game, Dolby Pro Logic II Game, Dolby Pro Logic IIx Game,

Dolby Pro Logic IIz.

NOTE: To use the 6.1- and 7.1-channel surround modes, the surround back channels

must be enabled. See Manual Speaker Setup, on page 36 for more information.

Once you have programmed the surround mode for each type of audio, select the

line from the Surround Modes menu to override the AVR’s automatic surround-mode

selection.The AVR will use the same surround mode the next time the source is selected.

Digital formats include Dolby Digital 2.0 (two channels only), Dolby Digital 5.1, Dolby

Digital EX (6.1), Dolby Digital Plus (7.1), Dolby TrueHD (7.1), DTS-HD High-Resolution

Audio (7.1), DTS-HD Master Audio (7.1), DTS 5.1, DTS-ES (6.1 Matrix and Discrete), DTS

96/24 (5.1), two-channel PCM modes in 32kHz, 44.1kHz, 48kHz or 96kHz, and 5.1 or

7.1 multichannel PCM.

NOTE: Dolby Pro Logic IIx is available only if you have set up the AVR’s Assigned Amp to

Surround Back; Dolby Pro Logic IIz is available only if you have set up the AVR’s Assigned

Amp to Front Height. See Manual Speaker Setup, on page 36, for more information.

Please refer to Table A12 in the Appendix for more information on which surround modes

are available with different bitstreams.

When the AVR receives a digital signal, it detects the encoding method and the number

of channels, which is displayed brieﬂy as three numbers, separated by slashes (e.g.,

“3/2/.1”).

The ﬁrst number indicates the number of front channels in the signal: “1” represents

a monophonic recording (usually an older program that has been digitally remastered

or, more rarely, a modern program for which the director has chosen mono as a special

effect). “2” indicates the presence of the left and right channels, but no center channel.

“3” indicates that all three front channels (left, right and center) are present.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Advanced Functions

Audio Effects Button

Treble/Bass: These settings boost or cut the treble or bass frequencies by up to 10dB.

Use the Left/Right buttons to change the setting. The default setting is 0dB, at the center

of the bar.

To adjust other audio settings, such as the tone controls, press the Audio Effects

button to display the Audio Effects menu. You can also access the menu by pressing

the Info button and selecting Audio Effects.

LFE Trim: This setting attenuates the loudness of the LFE signal to the subwoofer. The

setting defaults to the maximum of 0dB. Press the Left/Right buttons to reduce the

level by up to 10dB; the setting will appear as a negative number. NOTE: This setting

is effective only when a dedicated LFE-channel signal is present in the source material.

Audio Effects – Cable/Sat

Dolby Volume:

Medium

Low

EZ Set/EQ: This setting activates or deactivates the equalization settings obtained when

the EzSet/EQ II process was run.The settings are saved for reactivation at a later listening

session.

PLIIz Height Gain:

Edit: Dolby PLII Music

Edit: Dolby PLIIx Music

When you have ﬁnished making adjustments, press the Audio Effects button or the Back/

Exit button.

Tone Control:

Treble:

Bass:

Off

Video Processing

The AVR’s video processor automatically provides the best picture based on the

capabilities of your video display and the incoming source video. You may experiment

with the Video Modes menu adjustments to try to improve the picture further.

LFE Trim:

EZSET/EQ:

Adjust your video display’s picture settings before adjusting the AVR’s Video Modes

settings. Access the picture settings from the Video Modes menu. Press the Video Modes

button, and the Video Modes screen will appear. You can also access the menu by

pressing the Info button and selecting Video Modes.

NOTE: Each source has its own independent Audio Effects settings.

Dolby Volume: See Dolby Volume, on page 28, for an explanation of Dolby Volume

processing and its beneﬁts. Refer to the table on that page for an explanation of each of

the Dolby Volume settings.

Video Modes – Disc

PLIIz Height Gain: When you have set the Assigned Amp to Front Height (see Manual

Speaker Setup, on page 36), the PLIIz Height Gain setting will become available.The front

height channels can greatly improve the spatial experience of a surround-sound system.

Some listeners may want the depth and dimension that height channels provide, but from

a seemingly transparent experience. Other listeners may prefer to accentuate the front

height channels by using a higher volume setting.

Video Mode:

Movie

Advanced Video Settings

NOTE: Each source has its own independent Video Modes settings.

The PLIIz Height Gain control gives you the ability to change the volume of the front height

channels to suit different programs. The control has three settings: Low (normal volume),

Mid (moderate volume increase) and High (maximum volume increase). Note that you

can also ﬁne-tune the front height channel volume levels. See Setting Channel Output

Levels Manually, on page 38, for details.

Video Mode: The default setting of Off passes the video signal through to the display

with only basic video processing. (NOTE:Video scaling cannot be turned off, but selecting

the HDMI Bypass mode in the Info menu for a source connected to one of the HDMI Input

connectors passes the video signal directly from the HDMI input connector to the HDMI

Monitor Out connector, bypassing all video processing.)

Edit Dolby PLII/Dolby PLIIx Music: Some additional settings are available for the

Dolby Pro Logic II modes. When the Dolby Pro Logic II or IIx Music modes have been

selected, choose the “Edit Dolby PLII/IIx Music” submenus to adjust the Center Width,

Dimension and Panorama settings.

Select one of these processing options to optimize the picture for the current program by

applying adjustments to the brightness, contrast, color and sharpness:

s Sports: For sporting events.

s Nature: For programs shot outdoors, in a natural setting.

s Movie: For movies and many television broadcasts.

Edit: Dolby PLIIx Music

s Custom: Lets you adjust the picture settings manually. The Brightness, Contrast,

Color and Sharpness settings will appear as sliders with values ranging from 0 to

100. The default setting for each adjustment is 50. Use the Left/Right buttons to

change each setting’s value. See How to Adjust the Custom Picture Settings, on page

35, for detailed information about making these adjustments.

Center Width

Dimension

Panorama

Off

Exit

Center Width: This setting affects how vocals sound through the three front speakers.

A lower number focuses the vocal information tightly on the center channel. Higher

numbers (up to 7) broaden the vocal soundstage. Use the Left/Right buttons to adjust.

Dimension: This setting affects the depth of the surround presentation, allowing you to

“move” the sound toward the front or rear of the room. The setting of “0” is a neutral

default. Setting “F-3” moves the sound toward the front of the room, while setting “R-3”

moves the sound toward the rear. Use the Left/Right buttons to adjust it.

Panorama: With the Panorama mode turned on, some of the sound from the front

speakers is moved to the surround speakers, creating an enveloping “wraparound”

effect. Each press of the OK button toggles the setting On or Off.

Tone Control: This setting determines whether the treble and bass controls are active.

When it’s set to Off, the tone controls are out of the circuit, with no changes to the sound.

When it’s set to On, the bass and treble controls are in the circuit.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Advanced Functions

How to Adjust the Custom Picture Settings

Sharpness Adjustment

Set the Video Mode to Custom to display the picture settings.

Contrary to intuition, the picture will appear sharper and clearer with the sharpness

backed off from the maximum setting. Reduce the Sharpness setting on your television,

and the setting on the AVR, if necessary, to minimize the appearance of any white lines

between the bars in the gray-scale portion of the test screen.

Video Modes – Disc

Video Mode:

Advanced Video Settings

Movie

Advanced Video Settings: When the video mode is set to Custom, you can select this to

display the Advanced Video Modes submenu.

With a color-bar test pattern from a test disc or other source on the TV screen, you can

make the following adjustments:

Advanced Video Modes – Blu-ray

Noise Reduction:

Off

s The color intensity setting on your TV.

MPEG Noise Reduction:

Cross Color Suppressor:

Film Mode Detect:

s Color adjustments using the color bars, which may be (left to right) black, white,

yellow, cyan (turquoise), green, magenta, red, blue, black.

s The color transition, seen as sharp separation of the bars.

s The performance of the color circuits in your TV (with video signals); bar edges

should show no vertical crawling dots.

Noise Reduction: Adjust this setting to Low, Medium or High to ﬁlter out signal noise.

MPEG Noise Reduction: This setting is designed to address two speciﬁc types of video

distortion: mosquito noise and blocking artifacts. If you see haziness or shimmering

around the edges of objects or the scrolling credits in a ﬁlm, or if the image appears

to “pixelate” into blocks, change the MPEG Noise Reduction setting from Off to Low,

Medium or High.

Use the gray scale and the black/white ﬁelds in the test pattern to adjust the brightness

and contrast.

Brightness Adjustment

1. Turn down the color control on your TV until the color bars appear in black and white.

Cross Color Suppressor: Turn this setting on to remove cross color artifacts, which

can occur when high-frequency luminance (brightness) signals are misinterpreted as

chrominance (color) signals, causing unwanted ﬂickering, ﬂashing colors or rainbow

patterns. This setting is not available when you are using HDMI sources or when no video

signal is present.

2. Adjust the Contrast to the lowest level where you still can see all gray-scale bars

separately and clearly.

3. Adjust the Brightness so that the bars in the gray scale are all visible. The bar farthest

to the left has to be as black as possible rather than gray, but the next gradation must

clearly be distinct from it. The bars in the gray scale should gradually and evenly

change from black to white.

Film Mode Detect: This setting is accessible only when the Deinterlacing setting is

turned on. It compensates for the different frame rates in which ﬁlm and video are shot.

Film is shot at a rate of 24 frames per second (progressive scan), while video is shot at

slightly less than 60 frames per second (interlaced).The AVR is able to detect whether the

program was originally shot on ﬁlm and transferred to video (e.g., to create a DVD), and

will compensate appropriately for any authoring errors in the conversion. Select a setting

of 3:2 (for NTSC materials), 2:2 (for PAL materials), Off or Auto.

Contrast Adjustment

1. Adjust the contrast on your TV until you see a bright white bar in the lower right corner

of the screen and a deep, dark, black bar to the left.

2. If the brightness of the white bar no longer increases when the Contrast is turned

up or the borders of white letters bloom (overlight) into the black areas (drastically

decreasing the sharpness of the letters), the contrast has been turned up too much.

Reduce the Contrast until these effects disappear and the video still looks realistic.

3. If you are watching TV with ambient daylight, adjust the contrast so that a normal

video picture looks the same as the surroundings in your room; that way the eye is

relaxed when watching the TV picture. Reduce the setting when the surrounding light

is dimmed to improve the sharpness of the picture.

4. The gray scale in the middle line should retain the same distinction between each

bar as before the contrast adjustment. If not, repeat both Step 3 of the Brightness

Adjustment and the Contrast Adjustment.

Color Adjustment

1. When the brightness and contrast are set optimally, adjust the Color control. Set the

level so that the colors look strong but still natural, not overdone. If the color level is

too high, depending on the TV, some of the bars will seem wider or the color intensity

will not increase when the control is turned up. Test the color intensity with a video of

pictures of faces, ﬂowers, fruit and vegetables.

2. Refer to a large white bar in your test pattern to tweak the warmth of the picture using

the Tint control on your TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Manual Speaker Setup

Step Three – Manual Speaker Setup Menu

Manual Speaker Setup

Now you are ready to program the receiver. Sit in your usual listening position, and make

the room as quiet as possible.

YourAVR is ﬂexible and may be conﬁgured to work with most speakers and to compensate

for the acoustic characteristics of your room.

With the receiver and video display turned on, press the AVR button to display the menu

system. Select the Speaker Setup menu, and then select Manual Setup.

The EzSet/EQ process automatically detects the capabilities of each connected speaker

and optimizes the AVR’s performance with your speakers. If you are unable to run EzSet/

EQ calibration, or if you wish to set up your AVR for your speakers manually, use the

Manual Speaker Setup on-screen menus.

Speaker Setup

Before beginning, place your loudspeakers as explained in the Place Your Speakers

section, on page 13, and connect them to the AVR. Consult the owner’s guide for the

speakers or the manufacturer’s Web site for their frequency-range speciﬁcation.Although

you may set the AVR’s individual channel levels “by ear,” an SPL (sound-pressure level)

meter purchased at a local electronics store will provide greater accuracy.

Automatic Setup – EzSet/EQ

Automated Speaker Setup and EQ

Manual Setup

Manually Adjust Speaker Settings

Record your conﬁguration settings in Tables A3 through A12 in the Appendix for easy re-

entry after a system reset or after the AVR’s Master Power switch has been turned off or

the unit has been unplugged for more than four weeks.

NOTE: When using the AVR’s Manual Speaker Setup menus, select a video output

resolution of 720p or higher to view graphics that simplify conﬁguration.

If you have already run the EzSet/EQ process as explained in Conﬁgure the AVR for Your

Speakers, on page 25, the AVR saved the results. To ﬁne-tune the EzSet/EQ results, or to

conﬁgure the AVR from scratch, select Manual Setup. A screen similar to the one shown

below will appear.

Step One – Determine Your Speakers’ Crossover Frequencies

Without using the EzSet/EQ process, the AVR can’t detect how many speakers you’ve

connected to it; nor can it determine their capabilities. Consult the technical speciﬁcations

for all of your speakers and locate the frequency response, usually given as a range, e.g.,

100Hz – 20kHz ( 3dB). Write down the lowest frequency that each of your speakers

is capable of playing (100Hz in the above example) as the crossover in Table A3 in the

Appendix. NOTE: This is not the same as the crossover frequency listed in the speaker’s

speciﬁcations.

Speaker Setup

Number of Speakers

Level Adjust

For the subwoofer, write down the transducer size. The AVR’s bass management

determines which speakers will be used to play back the low-frequency (bass) portion

of the source program. Sending the lowest notes to small satellite speakers will result in

bad sound and may even damage the speakers. The highest notes may not be heard at

all through the subwoofer.

Crossover (Size)

Distance

Sub Mode:

Reset

Sub

With proper bass management, the AVR divides the source signal at a crossover point.

All information above that crossover point is played through your system’s speakers,

and all information below the crossover point is played through the subwoofer. This way,

each loudspeaker in your system will perform at its best, delivering a more powerful and

enjoyable sound experience.

NOTE: All of the speaker setup submenus include the Back option. To save the current

settings, select the Back option.

To reconﬁgure the speakers from scratch, select the Reset option.

Step Two – Measure the Speaker Distances

For best results, adjust the submenus in this order: Number of Speakers, Crossover (Size),

Sub Mode, Distance and Level Adjust.

Ideally, all of your speakers would be placed in a circle, with the listening position at the

center. However, you may have had to place some speakers a little farther away from the

listening position than others. Sounds that are supposed to arrive simultaneously from

different speakers may blur, due to different arrival times.

Number of Speakers

This selection lets you program the correct setting for each speaker group. The settings

in this menu affect the remainder of the speaker setup process and the availability of

various surround modes at any time.

Your AVR provides a Distance adjustment that compensates for these real-world speaker

placement differences.

Measure the distance from each speaker to the listening position, and write it down

in Table A4 in the Appendix. Even if all of your speakers are the same distance from

the listening position, enter your speaker distances as described in Set the Speaker

Distances, on page 38.

Select ON when the speakers are present in the system; select OFF for positions where

no speakers are installed. The Front Left & Right setting is always ON and may not be

disabled.

Speaker Setup

Number Of Speakers:

7.1

Front Left & Right

Center

Surr. Left & Right

Assigned AMP

Sub

Surr. Back

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Manual Speaker Setup

Any changes will be reﬂected in the total Number Of Speakers displayed at the top of

the screen.

Sub Mode

Move the cursor to the Sub Mode line. This setting depends upon the Crossover setting

you selected for the front left and right speakers.

The Assigned AMP setting includes four options:

s Surround Back: Select the Surr. Back option if your main system is a 7.1-channel

s If you set the front speakers to a numeric crossover frequency, the subwoofer

setting will always be SUB. All low-frequency information will always be sent to the

subwoofer. If you don’t have a subwoofer, either upgrade to full-range front left and

right speakers or add a subwoofer at the earliest opportunity.

system and you are using surround back left and surround back right speakers.

s Zone 2: Select the Zone 2 option if your main system is a 5.1-channel system and

you want to use the Assigned Amp speaker outputs to power speakers in Zone 2. See

Install a Multizone System, on page 21, for more information.

s If you set the front speakers to LARGE, select one of the three following settings for

the subwoofer:

s Front Height: Select the Front Height option if your main system is a 7.1-channel

system and you are using Front Height speakers with Dolby Pro Logic IIz.

L/R+LFE: This setting sends all low-frequency information to the subwoofer,

including a) information that would normally be played through the front left and

right speakers and b) the special low-frequency effects (LFE) channel information.

s Off: Select Off if you have not connected speakers to the Assigned Amp speaker

outputs.

OFF: Select this setting when no subwoofer is in use. All low-frequency information

will be sent to the front left and right speakers.

NOTE: When you set Assigned AMP to “Zone 2,” the speakers connected to the Assigned

Amp outputs will not be conﬁgured during the EzSet/EQ process. Conﬁgure the speakers

manually, as explained below.

LFE: This setting plays low-frequency information contained in the left and right

program channels through the front left and right speakers, and directs only the

LFE-channel information to the subwoofer.

When you have ﬁnished, select the Back option or use the Back/Exit button.

Crossover (Size)

Set the Speaker Distances

After you return to the Speaker Setup menu, navigate to the Crossover (Size) line and

press the OK button to display the Adjust Crossover Frequencies menu.

As described above in Step Two, when you measured the distances from each of your

speakers to the listening position, your AVR provides an adjustment that compensates

for the different distances so that the sound from each speaker will reach the listening

position at the proper time. This process will improve the clarity and detail of the sound.

Speaker Setup

Adjust Crossover Frequencies

On the Speaker Setup menu, move the cursor to the Distance line and press the OK

button to display the Adjust Speaker Distance menu.

Front Left & Right

Center

80 Hz

Speaker Setup

Adjust Speaker Distance

Surr. Left & Right

Surr. Back L & R

Sub Size

100 Hz

80 Hz

10 ft

Front Left

Center

Reset Crossover

Front Right

Surround Right

Surround Back Right

Surround Back Left

Surround Left

Sub

The AVR will display only those speaker groups you set to On in the Number of Speakers

menu.

Refer to Table A3 to see the crossover frequencies that you wrote down for your speakers.

For each speaker group, select one of these eight crossover frequencies: Large, 40Hz,

60Hz, 80Hz, 100Hz, 120Hz, 150Hz or 200Hz. If the speaker’s crossover frequency is

below 40Hz, select the ﬁrst option, “Large.” This setting doesn’t refer to the speaker’s

physical size but to its frequency response, which is also called “full range.”

Enter the distance from each speaker to the listening position that you measured in Step

Two and recorded in Table A4 in the Appendix (see page 46). Select a speaker, then use

the Left/Right buttons to change the measurement. You can enter distances between 0

and 30 feet (9.1m). The default distance for all speakers is 10 feet (3m).

We recommend that you set the Subwoofer Crossover Frequency to the same frequency

you used for the Front Left & Right speaker setting. If you set the Front Left & Right

speakers to “Large”, we recommend that you experiment with different Subwoofer

Crossover Frequency settings to ﬁnd the one that produces the best blend between the

subwoofer and Front Left & Right speakers with your system in your room.

The default unit of measurement is feet. To change the unit to meters, return to the main

AVR menu. Select the System Settings menu, then scroll down to the General Setup

section and select the Unit of Measure line. Press the OK button to change the setting.

NOTE: If you set the Assigned AMP channels to Zone 2, you will not be able to adjust

their delay settings.

Write down the settings in Table A6 in the Appendix.

When you have ﬁnished entering the settings, select Back or press the Back/Exit button.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Manual Speaker Setup

Step Four – Setting Channel Output Levels Manually

Reset Levels: To reset all levels to their factory defaults of 0dB, scroll down to this line

at the bottom of the menu and press the OK button.

For a conventional stereo receiver, a simple balance control adjusts the stereo imaging

by varying the relative loudness of the left and right channels. In a home theater system

with up to seven main channels plus up to two subwoofers, achieving proper imaging

becomes both more critical and more complex. The goal is to ensure that each channel

is heard at the listening position with equal loudness (when signals of equal loudness

are played through them).

When you have ﬁnished adjusting the speaker levels, record the settings in Table A3 in

the Appendix. Then select the Back option or press the Back/Exit Button.

Notes on Setting Speaker Volumes in Home Theater Systems:

While setting your system’s individual speaker volume levels is ultimately up to your

personal taste, here are some ideas you may ﬁnd helpful:

Your AVR’s EzSet/EQ calibration can handle this critical task for you simply and

automatically. However, the AVR’s Adjust Speaker Levels menu allows you to calibrate

the levels manually, either using the system’s built-in test tone or while playing source

material.

s For ﬁlms and video-music programs, your overall goal should be to create an

enveloping, realistic sound ﬁeld that draws you into the ﬁlm or music program

without drawing your attention away from the action on the screen.

Press the AVR button to display the menu system, and then navigate to the Speaker Setup

line. Press the OK button to display the Speaker Setup menu. Select Manual Setup, press

the OK button, and then navigate to the Level Adjust line. Press the OK button to display

the Adjust Speaker Levels menu.

s For multichannel music recordings, some music producers will create a sound ﬁeld

that places the musicians all around you; others will create a sound ﬁeld that places

the musicians in front of you, with more subtle ambience in the surround speakers

(as you would experience in a concert hall).

s In most 5.1-channel and 7.1-channel ﬁlm soundtracks, the surround speakers are

not intended to be as loud or as active as the front speakers. Adjusting the surround

speakers so they are always as loud as the front speakers could make dialogue

difﬁcult to understand and will make some sound effects sound unrealistically loud.

Speaker Setup

Adjust Speaker Levels

Test Tone

Off

Front Left

Notes on Setting Subwoofer Volume:

Center

s Sometimes the ideal subwoofer volume setting for music is too loud for ﬁlms, while

the ideal setting for ﬁlms is too quiet for music. When setting the subwoofer volume,

listen to both music and ﬁlms with strong bass content and ﬁnd a “middle ground”

volume level that works for both.

Front Right

Surround Right

Surround Back Right

Surround Back Left

Surround Left

Sub 1

s If your subwoofer always seems too loud or too quiet, you may want to place it in

a different location. Placing the subwoofer in a corner will always tend to increase

its bass output, while placing it away from any walls or corners will always tend to

lessen its bass output.

Sub 2

Reset Levels

All of the system’s speakers will appear with their current level settings. You can adjust

each speaker’s level between –10dB and +10dB in 1dB increments.

While making adjustments, you can measure the channel levels in one of these ways:

s Preferably, use a handheld SPL meter set to the C-weighting, slow scale.Adjust each

speaker so that the meter reads 75dB when the AVR’s built-in test noise is playing.

s By ear.Adjust the levels so that the test tone sounds equally loud to you when it plays

through each speaker.

To set your levels using the AVR’s internal test tone, select the menu’s Test Tone line and

use the OK button to select between Auto and Manual:

Auto: The test tone will automatically circulate to all speakers, as indicated by the

highlight bar. Use the Left/Right buttons to adjust the level for any speaker when the

test tone is paused there. Use the Up/Down buttons to move the cursor to another line,

and the test tone will follow the cursor. To stop the test tone, use the Up/Down buttons to

move the cursor out of the screen’s speaker listings area.

Manual: The test tone will stay on the current speaker until you use the Up/Down

buttons to move it to another speaker. Use the Left/Right buttons to adjust the level for

the speaker through which the test tone is playing.

If you are using an external source to set your output levels, set Test Tone to Off, use

the Up/Down buttons to navigate to each speaker, and use the Left/Right buttons to

adjust the speaker’s level while the source plays. NOTE: If you are using a handheld SPL

meter with external source material, such as a test disc or an audio selection, play it and

adjust the AVR’s master volume control until the meter measures 75dB. Then adjust the

individual speaker levels.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Manual Speaker Setup

Listening in Zone 2

With the multizone system in use, you may enjoy an exciting 5.1-channel home theater

presentation in the main listening area, while others listen to the same program or an

entirely different source in another room. See Install a Multizone System, on page 21, for

installation information.

You control the AVR’s multizone system from the on-screen Zone 2 menu. Press the AVR

button, and use the Up/Down buttons to navigate to the Zone 2 line. Press the OK button

to display the Zone 2 menu.

Zone 2

Status:

Off

Source:

FM Radio

Volume:

Assigned AMP:

Zone 2

Status: This line lets you turn Zone 2 on or off.

Source: This line lets you select the source input for Zone 2. You may select a different

source from the one currently operating in the main listening area. However, if the same

source has been selected for both the main listening area and Zone 2, listeners in both

areas will hear the same content.

Only analog audio sources are available to the multizone system. To hear digital devices

such as a CD player in Zone 2, follow these steps:

1. In addition to making a digital audio connection, connect the source device’s analog

audio outputs to the AVR. Make a note in Table A5 on page 47 to record which set of

analog inputs you used.

2. In the Info menu, scroll down to the Zone 2 Audio setting and select the analog audio

input. (Leave the Audio Input From Source set to the digital input.)

Notes about listening in Zone 2:

s Although you can listen to iPod as a source in Zone 2, you cannot begin iPod

playback from within Zone 2. You must initially select iPod as a source in Zone 1

and begin playback of a track or playlist from there. Then you can select iPod as the

Zone 2 source and control playback from within Zone 2 even if you switch Zone 1

to a different source.

s Only one (1) internal source (iPod, USB, FM/AM radio, vTuner, Network) can be active

at a time across both zones. For example, if you are listening to iPod as the source

in Zone 1 and switch the source in Zone 2 to FM radio, it will switch the source in

Zone 1 to FM (and vice versa). To listen to different sources in Zone 1 and Zone 2 at

the same time, at least one source must be one of the AVR’s conﬁgurable external

sources (Cable/Sat, Disc, DVR, TV, Game, Media Server, Aux, Buttons A/B/C/D) that is

connected to one of the AVR’s analog audio inputs.

Volume: Highlight this line, and use the Left/Right buttons to control the volume in Zone 2.

Assigned AMP: This line lets you assign the Assigned AMP channels to “Zone 2” for

multizone operation (see Number of Speakers, on page 37). When this line is set to Zone

2, you may conﬁgure the main listening room for only up to 5.1 channels.

To operate the multizone system using the main remote, slide the Zone Select Switch at

the bottom of the remote to the “2” position.

AVR 3700/AVR 370 only: To select a zone using the Zone 2 remote, press the Zone

Selector, and the Zone Indicator light will turn green when the remote is set to operate

Zone 1 or red to operate Zone 2.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

System Settings

CEC Power Control: This setting links the power on/off functions of the AVR to those of a

TV connected to its HDMI Monitor Out connector.When Power Control is set to On, turning

the TV’s power off will automatically put the AVR into the Standby mode; turning the TV’s

power on will automatically turn the AVR on. NOTE: The connected TV must support the

HDMI System Standby CEC (Consumer Electronics Control).

System Settings

The AVR’s System Settings menu lets you customize in what way many of the AVR’s

features operate. Press the AVR button and navigate to the System line. Press the OK

button to display the System Settings menu.

TV Control: This setting extends some audio-control functions between the AVR and a TV

connected to its HDMI Monitor Out connector. When TV Control is set to On, if the TV is set

to use external speakers, the TV’s internal speakers will mute, and you can use the TV’s

remote to control the AVR’s volume up/down and mute functions. If the TV is set to use

its internal speakers, the AVR’s output will automatically mute. NOTE: The connected TV

must support the HDMI Remote Control/System Audio Control CEC (Consumer Electronics

Control).

System Settings

Front Panel Settings

Panel Brightness:

100%

HDMI Settings

HDMI Audio to TV:

HDMI Control:

HDMI out 1

Auto

Off

General AVR Settings

Audio Return Channel:

CEC Power Control:

TV Control:

Network Settings: Select this to set up your AVR for connection to your wired home

network. Note: The AVR 3700 and AVR 370 will ﬁrst present a Wired/Wireless/Network

Upgrade screen. For information about the Wired Network connection screen, see Set Up

the Network, on page 27.

Off

General AVR Settings

Network Settings

Volume Units:

Volume Default:

Volume Default Level

Unit of Measure:

Language:

Off

Network Settings

Mac

0x:00:0x:00:0x:0x

Feet (ft)

English

Network Settings:

IP Address:

Subnet Mask:

Gateway:

Primary DNS:

Secondary DNS:

Proxy

Automatic

000 . 000 . 000 . 000

Off

System Settings

Volume Default:

Volume Default Level

Unit of Measure:

Language:

Off

000.000.000.000

00000

IP Address:

Proxy Port:

Feet (ft)

English

Dolby Vol. Calibration:

RS232 Control:

Network Status:

Apply & Save

Connected

Off

Menu Appearance

Menu Transparency:

Volume/Status Messages:

Menus:

Setup and Slide-In Menus:

Screen Saver:

Medium

3 seconds

30 seconds

5 minutes

10 minutes

s Mac: This line is informational only and identiﬁes the AVR to other devices on your

home network and the Internet for www.radioharmankardon.com.

s Network Settings: Since most networks use automatic IP address settings, in most

cases you can set Network Settings to Automatic. If you are required to use a static

IP address and network settings, you must obtain these settings from your ISP or

network administrator. Use the OK button to set this line to “Manual.” The following

settings will become active: IP Address, Subnet Mask, Gateway, Primary DNS,

Secondary DNS. If your network is a proxy network, enter those settings for Proxy,

the second IP Address and Proxy Port.

System Info

Software Version:

Upgrade Software

13-10-2012 01

Front-Panel Dimmer: This control sets the brightness of the AVR’s front-panel message

display. Select from 100%, 50%, 25% or Off. The light inside the Volume Control will go

out when the display is partly or fully dimmed, but the Power Indicator will always remain

lit to remind you that the AVR is powered on.

Use the Number buttons to make the entries for all of these settings. When you have

ﬁnished, select Apply & Save, and press the OK button. The AVR will enter the Standby

mode. When you turn the AVR back on, it will attempt to connect to the network using the

settings you entered. If the AVR cannot connect to the network using the manual settings,

contact your ISP or network administrator for assistance.

HDMI Settings

HDMI Audio to TV: This setting determines whether HDMI audio signals are passed

through the HDMI Monitor Out connector to the video display. In normal operation, leave

this setting at Off, as audio will be played through the AVR. To use the TV by itself, without

the home theater system, turn this setting to On. In this case you will need to mute the

TV’s speakers (or switch the setting to Off) when using the AVR for audio.

s Network Status: This line indicates the AVR’s current network-connection status

(Connected/Not Connected).

s Apply & Save:Any time you make a change in any of the Network settings, the Apply

& Save line will become available. Select this line and press the OK button. The AVR

will go into the Standby mode. After you turn the AVR back on, the new network

settings will be in effect. IMPORTANT: You must select Apply & Save for your

network settings to take effect.

HDMI Control: This setting allows the communication of control information among the

HDMI devices in your system. Turn this setting to On to allow control communication

between the HDMI devices; turn the setting to Off to forbid control communication. (For

AVR 3700/AVR 370 select HDMI Out 1, HDMI Out 2 or Off.)

NOTE: If you have trouble connecting to the network at any time, cycle the AVR into

the Standby mode, and then turn it back on.

Audio Return Channel: Selecting “Auto” will send audio from the TV to the AVR via the

HDMI Audio Return Channel (ARC) connection (which is in the HDMI cable connecting

the AVR to the TV). The TV source’s “Audio Input from Source” will be automatically

reassigned to the HDMI ARC connector. This way, whenever you’re watching a source

that is connected directly to your TV (such as an Internet connection), you can listen to

the sound through the AVR.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

System Settings

Volume Units: This setting lets you select whether the AVR displays the volume level in

the conventional decibel scale or on a numeric scale from 0 to 100. When the decibel

scale is used, 0dB is the maximum recommended volume, with lower volumes displayed

as negative values. (-90dB – +10dB). The decibel scale is the default setting.

Settings Lock

Settings Lock prevents the Setup Source, Speaker Setup and System settings menus

from being inadvertently changed. With Settings Lock set to On, the screen shown below

will appear whenever someone attempts to access a setting in one of those menus.

Volume Default and Volume Default Level: These two settings are used together to

program the volume level when you turn on the AVR. Set Volume Default to On, and then

set the Volume Default Level to the desired turn-on volume. When Volume Default is set

to Off, the AVR will turn on at the last-used volume setting from the previous listening

session.

Settings Lock

The settings lock is currently On.

In order to access the settings,

please select ‘Settings lock Off’.

Unit of Measure: Adjusts the speaker-distance settings for Manual Speaker Setup.

Select between meters and feet.

Language: Select the preferred language for the AVR’s on-screen menus and displays:

English, French, Spanish, German, Italian or Russian.

Cancel

Settings Lock Off

Dolby Volume Calibration: This setting determines the Dolby Volume calibration, as

described in Dolby Volume Calibration, on page 28. Refer to that section for details about

setting the calibration.

Select “Settings Lock Off” to access the settings or “Cancel” if the setting was accessed

inadvertently. NOTE: If you select “Settings Lock Off,” you will need to turn the Settings

Lock back on via the Settings Lock menu.

RS232 Control: If you have connected the AVR to an external control system via its RS-

232 port, set this line to On to enable the AVR to be controlled by the external control

system. Refer to the control system’s documentation for details.

Menu Appearance

Menu Transparency: This selection lets you determine whether video programs will be

visible when the menu system is in use. Select Normal for a fully transparent background,

Medium for partial transparency or Opaque to completely block video programs while

menus are on screen.

Volume/Status Messages: When the AVR is turned on, the volume is adjusted, the

source is changed or a change in the input signal is detected, a status message will be

displayed on the TV screen. Select how long the message remains visible, from 2 to 10

seconds, with a default of 3 seconds. Select “Off” if you do not wish to see the status

messages on the TV screen (they will still appear on the AVR’s front-panel message

display).

Menus: This setting governs how long the Surround Modes, Video Modes and Audio

Effects menus remain visible after the last adjustment: 5 seconds, 10 seconds, 30

seconds, 1 minute or 5 minutes. Select “No Time-Out” to view the menus indeﬁnitely, but

this setting is not recommended, due to the danger of “burn-in” on some video displays.

Setup and Slide-In Menus: This setting determines how long the setup menus (Main

Menu, Speaker Setup Menu, Zone 2 Menu, all slide-in menus) remain visible after the last

adjustment. Select a time-out period of 5, 10 or 15 (the default) minutes, or no time-out,

which leaves the menus on screen until manually cleared. A time-out period avoids the

possibility of burn-in damage to plasma or CRT displays.

Screen Saver: Program a time-out period for no activity (with no menus displayed)

before the AVR’s built-in screen saver begins. Select a period of 5 minutes, 10 minutes,

20 minutes, 30 minutes or 1 hour, or turn off the screen saver. A time-out period avoids

the possibility of burn-in damage to plasma or CRT displays.

System Info

Software Version: This line is informational only. From time to time, Harman Kardon

engineers may release software upgrades that improve your AVR’s performance

or add features. If you are experiencing difﬁculties with the AVR, a customer-service

representative may ask for the software version of your AVR to determine whether a later

upgrade is available.

Upgrade Software: If a software upgrade is released for your AVR, installation

instructions will be available in the Product Support section of the Web site or from

Harman Kardon customer service. At that time, you may access this submenu to install

the upgrade software.

IMPORTANT: During a system upgrade, do not power off the AVR or use any of its

controls. Doing so could permanently damage the AVR.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Advanced Remote Control Programming

Recording

Advanced Remote Control Programming

Two-channel analog audio signals, as well as composite video signals, are normally

available at the appropriate recording outputs. To make a recording, connect your audio

or video recorder to the appropriate AVR output connectors as described in the Making

Connections section, insert blank media in the recorder and make sure the recorder

is turned on and recording while the source is playing. Refer to the recording device’s

instructions for complete information about making recordings.

Remote Channel-Control Punch-Through

The punch-through feature allows you to operate one component while setting certain

groups of controls to operate another component. For example, while using theAVR controls

for surround modes and other audio functions, you may also use the remote to operate the

transport controls of your Blu-ray Disc player. Or while using the remote to control video

functions on your TV, you may also use the remote to change channels on your cable box.

NOTES:

1. The AVR only records analog audio signals. It does not convert digital audio signals

to analog.

To program punch-through control while operating any device:

1. For three seconds press and hold the Source Selector button for the main device the

remote will be operating. The Source Selector will light up, go dark and then light up

again, indicating the remote is in Program mode and that you may release the button.

2. HDMI and component video sources are not available for recording.

3. Please make certain that you are aware of any copyright restrictions on any material

you record. Unauthorized duplication of copyrighted materials is prohibited by law.

2. Select the type of punch-through programming.

a) For channel-control punch-through, press the Channel Up button.

b) To program transport-control punch-through, press the Play transport-control button.

Sleep Timer

The sleep timer sets the AVR to play for up to 90 minutes and then turn off automatically.

3. Press the Source Selector button for the device whose channel or transport controls

you will use while operating the device selected in the ﬁrst step. The Source Selector

button will ﬂash to conﬁrm.

Press the Sleep button on the remote, and the time until turn-off will be displayed.

Each additional press of the Sleep button increases the play time by 10 minutes, with a

maximum of 90 minutes. The SLEEP OFF setting disables the sleep timer.

For example, to watch the TV while changing channels using the cable box, press and

hold the TV button until it lights.Then press the Channel Up button, followed by the Cable/

SAT button.

When the sleep timer has been set, the front-panel display will automatically dim to half

brightness.

If you press the Sleep button after the timer has been set, the remaining play time will be

displayed. Press the Sleep button again to change the play time.

To undo punch-through programming, follow the same steps as above, but press the

same Source Selector button in Steps 1 and 3.

Resetting the Remote

NOTE: The Volume and Mute controls are always dedicated to the AVR.

To reset the remote to its factory default condition, simultaneously press and hold the TV

Source Selector button and the “0” Number button. When the TV Source button relights,

enter the code “333.”When the TV button goes out, and all of the Source Selector buttons

ﬂash, the remote control will be reset.

Programming Macro (Activity) Commands

In addition to their normal functions, you can also use the 0 – 9 Number buttons and AVR

Power On button to store Macro (Activity) commands – up to 11 of them. Each Macro

can send out up to 19 commands at one time from a single button push. Any AVR remote

control button’s function from any mode (except the Back/Exit button, the Light button,

and the Activity button) can be programmed into a Macro.

Processor Reset

If the AVR behaves erratically after a power surge, ﬁrst turn off the rear-panel Main

Power switch and unplug the AC power cord for at least 3 minutes. Plug the cord back

in and turn the receiver on. If this procedure doesn’t help, reset the AVR’s processor as

described below.

NOTE: Use caution when programming complicated Macros. It isn’t possible to program

a pause or delay before sending additional commands after a “Power On” command, and

the component may not be ready to respond to commands immediately after powering on.

NOTE: A processor reset erases all user conﬁgurations, including video resolution,

speaker and level settings, and tuner presets. After a reset, reenter all of these settings

from your notes in the Appendix worksheets.

To program a Macro:

1. To enter the Programming mode, simultaneously press and hold the Activity button and

the Number button or AVR Power On button to which you want to assign the Macro.

To reset the AVR’s processor:

2. Press in up to 19 commands that you want stored in that Macro button. During each

successive button selection, the Source Selector button LED will blink once. Press the

Source Selector button for each device (or Setup button for the AVR itself) before you

enter individual commands. This step counts as one of the 19 commands allowed for

each Macro.

1. Press the front-panel Standby/On switch to place the unit in the Standby mode (the

Power Indicator will turn amber).

2. Press and hold the front-panel Surround Modes button for at least 5 seconds until the

RESET message appears on the front-panel Message Display.

s You can select functions from another mode by ﬁrst pressing the corresponding

Source Selector button and then the buttons where those functions are located

within that mode. Pressing a Source Selector button also counts as one command.

NOTE: After performing a processor reset, wait at least 1 minute before pressing any

Source Selector buttons.

If the receiver does not function correctly after a processor reset, contact an authorized

Harman Kardon service center for assistance. Authorized service centers may be located

by visiting our Web site at www.harmankardon.com.

s For power on, press the AVR or Device Power On button.

s For power off, press the AVR or Device Power Off button.

3. Press the Activity button to end the programming process. The last Source Selector

button (or the Setup button) will ﬂash three times.

It isn’t possible to “edit” a command within a Macro. To erase the Macro:

1. Press and hold the Activity Button and the button into which you programmed the

Macro until the Source Selector or Setup button lights up.

2. Press the Activity button to erase the Macro.

To execute a Macro:

Press the Activity button, then press the button into which you programmed the Macro.

IMPORTANT: Keep the remote aimed at the components until all of the Macro commands

have been executed. The remote can take up to 10 seconds to send out 19 Macro

commands.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Troubleshooting

Symptom

Cause

Solution

Unit does not function when Main Power switch is

turned on

s .O !# POWER

s %NSURE THAT THE POWER CORD IS PLUGGED INTO A LIVE !#

power outlet

s #HECK IF THE !# OUTLET IS SWITCHꢃCONTROLLED

Front-panel Message display lights, but there’s no sound s )NTERMITTENT INPUT CONNECTION

s 3ECURE ALL INPUT AND SPEAKER CONNECTIONS

s 0RESS -UTE BUTTON

or picture

s -UTE IS ON

s 6OLUME CONTROL IS TURNED DOWN

s 4URN UP 6OLUME CONTROL

No sound from any speaker; PROTECT message appears s !MPLIlER IS IN PROTECTION MODE DUE TO POSSIBLE SHORT

s #HECK ALL SPEAKER WIRES AT SPEAKER AND !62

connections for crossed wires

on Message display

circuit

s !MPLIlER IS IN PROTECTION MODE DUE TO INTERNAL

s #ONTACT YOUR LOCAL (ARMAN +ARDON SERVICE CENTER

problems

No sound from center or surround speakers

s )NCORRECT SURROUND MODE

s 3ELECT A SURROUND MODE OTHER THAN STEREO

s 0ROGRAM MATERIAL IS MONOPHONIC

s )NCORRECT SPEAKER CONlGURATION

s 0ROGRAM MATERIAL IS STEREO

s -ONO PROGRAMS CONTAIN NO SURROUND INFORMATION

s #HECK THE SPEAKER CONlGURATION IN THE SETUP MENU

s 4HE SURROUND DECODER MAY NOT CREATE CENTERꢃ OR

surround-channel information from nonencoded

programs

Unit does not respond to remote control commands

Intermittent buzzing in tuner

s 7EAK BATTERIES IN REMOTE

s 2EMOTE SENSOR IS OBSCURED

s #HANGE BATTERIES IN REMOTE

s %NSURE THAT THE !62ꢄS FRONTꢃPANEL REMOTE SENSOR IS IN

the line of sight of the remote

s ,OCAL INTERFERENCE

s -OVE THE !62 OR ANTENNA AWAY FROM COMPUTERSꢅ

ﬂuorescent lights, motors or other electrical appliances

(AVR 3700/AVR 370 only): Surround-back speaker

settings cannot be accessed, and the test tone does not

play through the surround back speakers

s -ULTIꢃZONE OPERATION HAS BEEN SELECTEDꢆ!SSIGNED !-0 s 5SE THE 3PEAKER 3ETUP MENU TO REASSIGN THE !SSIGNED

channels have been assigned to Zone 2

AMP to the surround back left and right channels

Unable to activate remote control Programming mode

s 3OURCE 3ELECTOR BUTTON IS NOT HELD FOR AT LEAST ꢂ

seconds

s "E SURE TO HOLD THE 3OURCE 3ELECTOR BUTTON FOR AT LEAST

3 seconds

Remote buttons light, but AVR does not respond

Unable to establish network connection

s 2EMOTE IS IN :ONE ꢇ MODE

s 3LIDE :ONE 3ELECTOR SWITCH TO THE :ONE ꢈ POSITIONꢁ

s !62 NETWORK PROGRAMMING REQUIRES REBOOTING

s #YCLE THE !62 INTO THE 3TANDBY MODEꢅ AND THEN TURN IT

on again

Additional information on troubleshooting possible problems with your AVR and installation-related issues may be found in the list of “Frequently Asked Questions,” which is

located in the Product Support section of our Web site: www.harmankardon.com

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Specifications

Audio Section

Stereo power:

AM Tuner Section

Frequency range:

520 – 1710kHz (AVR 3700/AVR 2700)

522 – 1620kHz ((AVR 370/AVR 270)

Signal-to-noise ratio:

38dB

500μV

1.0%

30dB

AVR 3700/AVR 370: 125W per channel, two channels

driven @ 6/8 ohms, 20Hz – 20kHz, <0.07% THD

Usable sensitivity (loop):

Distortion (1kHz, 50% mod):

Selectivity ( 10kHz):

AVR 2700/AVR 270: 105W per channel, two channels

driven @ 6/8 ohms, 20Hz – 20kHz, <0.07% THD

Multichannel power:

AVR 3700/AVR 370: 125W per channel, two channels

driven @ 6/8 ohms, 20Hz – 20kHz, <0.07% THD

AVR 2700/AVR 270: 105W per channel, two channels

driven @ 6/8 ohms, 20Hz – 20kHz, <0.07% THD

Video Section

Television format:

NTSC (AVR 3700/AVR 2700);

PAL (AVR 370/AVR 270)

Input sensitivity/impedance: 250mV/27k ohms

Signal-to-noise ratio (IHF-A): 100dB

Input level/impedance:

Output level/impedance:

1Vp-p/75 ohms

Video frequency response

(composite video):

10Hz – 8MHz (–3dB)

Support up to 4k x 2k

Surround system adjacent

channel separation:

Dolby Pro Logic/DPLII: 40dB

Dolby Digital: 55dB

DTS: 55dB

HDMI:

Frequency response (@ 1W): 10Hz – 130kHz (+0dB/–3dB)

General Specifications

High instantaneous current

capability (HCC):

42 amps (AVR 3700/AVR 370);

39 amps (AVR 2700/AVR 270)

Power requirement:

120V AC/60Hz (AVR 3700/AVR 2700);

220V – 240V AC/50Hz – 60Hz (AVR 370/AVR 270)

Transient intermodulation

distortion (TIM):

Power consumption:

<0.5W (standby);

440W maximum (AVR 3700/AVR 370);

370W maximum (AVR 2700/AVR 270)

Unmeasurable

40V/μsec

Slew rate:

Dimensions (W x H x D):

Weight

17-5/16" x 6-1/2" x 17-1/8"

(440mm x 165mm x 435mm)

(AVR 3700/AVR 370): 17.6 lb (8kg)

(AVR 2700/AVR 270): 16.9 lb (7.7kg)

FM Tuner Section

Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.

Frequency range:

87.5 – 108.0MHz

1.3μV/13.2dBf

Usable sensitivity IHF:

Signal-to-noise ratio (mono/stereo):

Distortion (mono/stereo):

Stereo separation:

70dB/68dB

0.2%/0.3%

40dB @ 1kHz

70dB

Selectivity ( 400kHz):

Image rejection:

80dB

IF rejection:

80dB

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Appendix

Appendix – Default settings, worksheets, remote product codes

Table A1 – Recommended Source Component Connections

Digital Audio

Analog Audio

Connection

Video

Device Type

AVR Source

Connection

Connections

Cable TV, satellite TV, HDTV

or other device that delivers

television programs

Cable/SAT

HDMI 2

Analog 1 or 2

HDMI 2

DVD Audio/Video, SACD,

Blu-ray Disc, HD-DVD player

Disc

HDMI 1

HDMI 4

Analog 1 or 2

HDMI 1

HDMI 4

Media Server, including

Harman Kardon DMC 1000

Media Server

Optical 1

HDMI 3

Analog 1 or 2

None

Video-game console

Game

HDMI 3

Any audio or video device,

e.g., CD player, camcorder,

cassette deck

Composite Video 1 or 2 (not used

for audio-only devices)

C (yellow) or D (blue)

Any

Coaxial or Optical

None

Analog 1 or 2

Composite Video 2 Input and

Monitor Output

Analog Recorder

Analog 1 or 2 Inputs and Rec Out

iPod or iPhone

DVR

USB/iPod

DVR

USB

N/A

Analog 1 or 2

HDMI 5

Table A2 – Source Setting Defaults

Media

Server

iPod/iPhone

Cable/Sat

Disc

Radio

Game

AUX

DVR

USB

via USB

Surround Modes

(Auto Select)

Logic 7

Movie

Logic 7

Movie

Logic 7

Movie

Logic 7

Movie

Logic 7

Movie

Logic 7

Movie

Logic 7

Music

Logic 7

Movie

Logic 7

Movie

Logic 7

Movie

Video Input

Audio Input

HDMI 2

HDMI 1

HDMI 4

N/A

HDMI 3

HDMI Front

N/A

HDMI 5

N/A

Optical Digital

Audio 1

480i

(NTSC);

576p (PAL)

480i

(NTSC);

576p (PAL)

480i

(NTSC);

576p (PAL)

480i

(NTSC);

576p (PAL)

480i

(NTSC);

576p (PAL)

480i

(NTSC);

576p (PAL)

Resolution to

Display*

480i (NTSC);

576p (PAL)

480i (NTSC);

576p (PAL)

480i (NTSC);

576p (PAL)

N/A

Zone 2 Audio

Dolby Volume

—

Radio

—

USB

Medium

Low

Medium

Low

Medium

* Video output resolution may vary for HDMI connections. The default HDMI resolution is 1080i for NTSC and PAL.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Appendix

Table A3 – Speaker/Channel Setting Defaults

All Digital and Two-Channel

Your Settings

Position 1

Your Settings

Position 2

Analog Audio Input Connectors

Left/Right Speakers

Center Speaker

Left/Right Surround Speakers

Left/Right Surround Back Speakers

Subwoofer 1

OFF

Subwoofer 2

Left/Right Speakers Crossover Frequency

Center Speaker Crossover Frequency

Left/Right Surround Speakers Crossover Frequency

100Hz

Left/Right Surround Back or Left/Right Front Height

Speakers Crossover Frequency

100Hz

Subwoofer Mode

LFE

100Hz

0dB

Subwoofer Size

Front Left Level

Center Level

Front Right Level

Surround Right Level

Surround Back Right/Front Height Right Level

Surround Back Left/Front Height Left Level

Surround Left Level

Sub Level

Table A4 – Delay Setting Defaults

Speaker Position

Distance From Speaker

to Listening Position

Your Delay Settings

Position 1

Your Delay Settings

Position 2

Front Left

10 feet (3 meters)

0mS

Center

Front Right

Surround Right

Surround Left

Surround Back Right/Front Height Right

Surround Back Left/Front Height Left

Subwoofer

A/V Lip Sync Delay (See Info Settings Menu)

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Appendix

Table A5 – Source Settings

Cable/

Sat

Media

Server

Disc

Radio

USB

Network

Game

AUX

iPod

DVR

Device Type

USB

iPod/iPhone

Surround Modes

Video Input

N/A

Audio Input

USB

Resolution to Display

Adjust Lip Sync

Change Name

Zone 2 Audio

Dolby Volume

N/A

USB

Table A6 – Audio Effects Settings

Default Cable/Sat Disc

Media

Server

Radio

USB

Network Game

AUX

iPod

DVR

Dolby Volume See Source

Tone Control

Treble

0dB

Bass

LFE Trim

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Appendix

Table A7 – Video Modes Settings

Cable/

Media

Server

Default

Disc

Radio

USB

Network Game

AUX

iPod

DVR

Sat

Video Mode

Off

Brightness*

Contrast*

Color*

Sharpness*

Noise Reduction**

MPEG Noise Reduction**

Cross Color Suppressor**

Film Mode Detect**

* Note: These settings are available only when the Video Mode is set to Custom.

** Note: These settings are displayed only when Advanced Video Settings is selected.

Table A8 – Surround Modes

Cable/

Sat

Media

Server

Default

Disc

Radio

USB Network Game

AUX

iPod

DVR

Logic 7 Movie or

native digital format

Auto Select

HARMAN virtual

speaker

Virtual Surround

Stereo

7 CH Stereo

Movie

Logic 7 Movie

Music

Logic 7 Music

Game

Logic 7 Game

Center Width*

Dimension*

Panorama*

Off

* Note: These settings are available only when Dolby Pro Logic II or IIx Music mode has been selected. Access these settings by selecting the Edit option.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Appendix

Table A9 – Remote Control Codes

Source Input

Cable/Sat

Disc

Device Type (if changed)

Product Brand and Code Number

DVR

Media Server

Game

AUX

Table A10 – System Settings

Feature

Default

Your Settings

Front Panel Dimmer

HDMI Audio to TV

HDMI Control

On 100%

Off

Audio Return Channel

CEC Power Control

TV Control

Off

Network Settings

Volume Units

Automatic

Volume Default

Volume Default Level

Unit of Measure

Language

Off

–25dB

Feet (AVR 3700/AVR 2700): Meters (AVR 370/AVR 270)

English

0dB

Dolby Volume Calibration

RS232 Control

Off

Menu Transparency

Volume/Status Messages

Menus

Medium

3 Seconds

1 minute

5 minutes

10 minutes

Check your unit

Setup and Slide-In Menus

Screen Saver

Software Version

Table A11 – Zone 2 Settings

Source Input

Default

Off

Your Settings

Status

Source

Cable/Sat

–25dB

Volume

Assigned AMP

Surround Back

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Appendix

Table A12 – Surround Modes

Surround Mode

Description

Incoming Bitstream or Signal

Dolby Digital

Provides up to five separate main audio channels and a dedicated low-frequency

effects (LFE) channel.

s $OLBY $IGITAL ꢈꢆꢉꢆꢁꢉ OR ꢁꢈꢅ ꢇꢆꢉꢆꢁꢉ OR ꢁꢈꢅ ꢂꢆꢉꢆꢁꢉ OR ꢁꢈꢅ

2/1/.0 or .1, 2/2/.0 or .1, 3/2/.0 or .1

s $OLBY $IGITAL %8 ꢊPLAYED AS ꢋꢁꢈ

s $OLBY $IGITAL 0LUS DECODED AND DELIVERED VIA COAXIAL OR OPTICAL

connection

Dolby Digital EX

An expansion of Dolby Digital 5.1 that adds a surround back channel that may be

played through one or two surround back speakers. May be manually selected when

a non-EX Dolby Digital stream is detected.

s $OLBY $IGITAL %8

s $OLBY $IGITAL ꢇꢆꢇꢆꢁꢉ OR ꢁꢈꢅ ꢂꢆꢇꢆꢁꢉ OR ꢁꢈ

Dolby Digital Plus

An enhanced version of Dolby Digital encoded more efficiently, Dolby Digital Plus

has the capacity for additional discrete channels and for streaming audio from the

Internet, all with enhanced audio quality. Source material may be delivered via an

HDMI connection or decoded to Dolby Digital or PCM and transmitted via coaxial or

optical digital audio.

s $OLBY $IGITAL 0LUS VIA ($-) CONNECTION ꢊSOURCE DEVICE DECODES TO

Dolby Digital when a coaxial or optical connection is used)

Dolby TrueHD

Dolby TrueHD is an expansion of MLP Lossless^™audio, the same format used on

DVD-Audio discs. Dolby TrueHD adds the features found in Dolby Digital, such as

night mode settings, while delivering fully lossless audio that is a true reproduction

of studio master recordings.

s "LUꢃRAY $ISC OR ($ꢃ$6$ ENCODED WITH $OLBY 4RUE($ꢅ DELIVERED VIA

HDMI

Dolby Digital Stereo

Delivers a two-channel downmix of Dolby Digital materials.

s $OLBY $IGITAL ꢈꢆꢉꢆꢁꢉ OR ꢁꢈꢅ ꢇꢆꢉꢆꢁꢉ OR ꢁꢈꢅ ꢂꢆꢉꢆꢁꢉ OR ꢁꢈꢅ

2/1/.0 or .1, 2/2/.0 or .1, 3/2/.0 or .1

s $OLBY $IGITAL %8

Dolby Pro Logic II Mode Analog decoder that derives five full-range, discrete main audio channels from matrix See below

Group surround-encoded or two-channel analog sources. Four variants are available.

Dolby Pro Logic II Movie Variant of Dolby Pro Logic II that is optimized for movie and television programs.

s $OLBY $IGITAL ꢇꢁꢉ OR ꢇꢁꢈ

s !NALOG ꢊTWOꢃCHANNEL

s 4UNER

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Zꢅ ꢌꢍK(Zꢅ ꢎꢏK(Z

Dolby Pro Logic II Music Variant of Dolby Pro Logic II that is optimized for music selections. Allows adjustment s $OLBY $IGITAL ꢇꢁꢉ OR ꢇꢁꢈ

of sound-field presentation in three dimensions:

s #ENTER 7IDTH ꢊADJUSTS WIDTH OF VOCAL SOUNDSTAGE

s $IMENSION ꢊADJUSTS DEPTH OF SOUNDSTAGE

s !NALOG ꢊTWOꢃCHANNEL

s 4UNER

s 0ANORAMA ꢊADJUSTS WRAPAROUND SURROUND EFFECT

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Zꢅ ꢌꢍK(Zꢅ ꢎꢏK(Z

Dolby Pro Logic

Variant of Dolby Pro Logic II that emphasizes use of the surround channels and

subwoofer for total immersion in the video gaming experience.

s $OLBY $IGITAL ꢇꢁꢉ OR ꢇꢁꢈ

s !NALOG ꢊTWOꢃCHANNEL

s 4UNER

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Zꢅ ꢌꢍK(Zꢅ ꢎꢏK(Z

Dolby Pro Logic II Game Original version of Dolby Pro Logic that steered a mono signal containing information s $OLBY $IGITAL ꢇꢁꢉ OR ꢇꢁꢈ

below 7kHz to the surround channels.

s !NALOG ꢊTWOꢃCHANNEL

s 4UNER

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Zꢅ ꢌꢍK(Zꢅ ꢎꢏK(Z

Dolby Pro Logic IIx

Mode Group

An expansion of Dolby Pro Logic II that adds a surround back channel which may

be played through one or two surround back speakers. The Dolby Pro Logic IIx

modes may be selected not only with Dolby Digital bitstreams, but thanks to the

AVR’s post-processor, they may also be used with some DTS bitstreams to add a

surround back channel to 5.1 modes.

See below

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Appendix

Table A12 – Surround Modes – continued

Surround Mode

Description

Incoming Bitstream or Signal

Dolby Pro Logic IIx

Music

This mode is similar to Dolby Pro Logic II Movie, with an added surround back

channel.

s $OLBY $IGITAL ꢇꢆꢉꢆꢁꢉ OR ꢁꢈꢅ ꢇꢆꢇꢆꢁꢉ OR ꢁꢈꢅ ꢂꢆꢇꢆꢁꢉ OR ꢁꢈꢅ %8

s !NALOG ꢊTWOꢃCHANNEL

s 4UNER

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Zꢅ ꢌꢍK(Zꢅ ꢎꢏK(Z

Dolby Pro Logic IIx

Music

This mode is similar to Dolby Pro Logic II Music, including the availability of center

width, dimension and panorama adjustments. Dolby Pro Logic IIx Music adds a

surround back channel.

s $OLBY $IGITAL ꢇꢆꢉꢆꢁꢉ OR ꢁꢈꢅ ꢇꢆꢇꢆꢁꢉ OR ꢁꢈꢅ ꢂꢆꢇꢆꢁꢉ OR ꢁꢈꢅ %8

s !NALOG ꢊTWOꢃCHANNEL

s 4UNER

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Zꢅ ꢌꢍK(Zꢅ ꢎꢏK(Z

Dolby Pro Logic IIx

Game

This mode is similar to Dolby Pro Logic II Game, with the added benefit of a surround s $OLBY $IGITAL ꢇꢆꢉꢆꢁꢉ OR ꢁꢈ

back channel.

s !NALOG ꢊTWOꢃCHANNEL

s 4UNER

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Z OR ꢌꢍK(Z

Dolby Pro Logic IIz

An expansion of Dolby Pro Logic II that adds left and right front height channels that

are played through two front height speakers mounted above and outside of the front

left and right speakers.

s $OLBY $IGITAL ꢇꢆꢉꢆꢁꢉ OR ꢁꢈꢅ ꢇꢆꢇꢆꢁꢉ OR ꢁꢈꢅ ꢂꢆꢇꢆꢁꢉ OR ꢁꢈꢅ %8

s !NALOG ꢊTWOꢃCHANNEL

s 4UNER

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Zꢅ ꢌꢍK(Zꢅ ꢎꢏK(Z

HARMAN virtual

speaker

Simulates 5.1 channels when only two speakers are present or a more enveloping

sound field is desired.

s $OLBY $IGITAL

s !NALOG ꢊTWOꢃCHANNEL

s 4UNER

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Z OR ꢌꢍK(Z

DTS Digital

DTS-HD

Using a different encoding/decoding method than Dolby Digital,

DTS Digital also provides up to five discrete main channels, plus an

LFE channel.

s $43 ꢈꢆꢉꢆꢁꢉ OR ꢁꢈꢅ ꢇꢆꢉꢆꢁꢉ OR ꢁꢈꢅ ꢂꢆꢉꢆꢁꢉ OR ꢁꢈꢅ ꢂꢆꢈꢆꢁꢉ OR ꢁꢈꢅ ꢇꢆꢇꢆꢁꢉ OR ꢁꢈꢅ

3/2/.0 or .1

s $43ꢃ%3 -ATRIX ꢊPLAYED AS ꢋꢁꢈ

s $43ꢃ%3 $ISCRETE ꢊPLAYED AS ꢋꢁꢈ

DTS-HD is a new high-definition audio format that complements the high-definition

video found on Blu-ray Disc and HD-DVD discs. It is transmitted using a DTS core

with high-resolution extensions. Even when only DTS 5.1 surround sound is desired

(or available, if the multizone system is in use), the higher capacity of high-resolution

discs serves up DTS at twice the bit rate used on DVD-Video discs.

s "LUꢃRAY $ISC OR ($ꢃ$6$ DISCS ENCODED WITH $43ꢃ($ MODESꢅ

delivered via HDMI connection

DTS-HD Master Audio

DTS-ES Matrix

DTS-HD Master Audio technology delivers bit-for-bit reproductions of the studio

master recording in up to 7.1 channels for an incredibly accurate performance.

s "LUꢃRAY $ISC OR ($ꢃ$6$ DISCS ENCODED WITH $43ꢃ($ -ASTER !UDIO

technology, delivered via HDMI connection

DTS Extended Surround adds a single surround back channel to DTS 5.1 digital

surround sound. The Matrix version includes the surround back channel information

“matrixed” into the left and right (side) surround channels for compatibility with

5.1-channel systems.

s $43ꢃ%3 -ATRIX

DTS-ES Discrete

DTS Stereo

DTS-ES Discrete is another Extended Surround mode that adds a surround back

channel, but this information is encoded discretely on the disc and is not derived

from information contained in the surround channels.

s $43ꢃ%3 $ISCRETE

Delivers a two-channel downmix of DTS Digital materials or presents a matrix-

encoded surround presentation.

s $43 ꢈꢆꢉꢆꢁꢉ OR ꢁꢈꢅ ꢇꢆꢉꢆꢁꢉ OR ꢁꢈꢅ ꢂꢆꢉꢆꢁꢉ OR ꢁꢈꢅ ꢂꢆꢈꢆꢁꢉ OR ꢁꢈꢅ ꢇꢆꢇꢆꢁꢉ OR ꢁꢈꢅ

3/2/.0 or .1

s $43 ꢎꢏꢆꢇꢌ

s $43ꢃ%3 -ATRIX

s $43ꢃ%3 $ISCRETE

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Appendix

Table A12 – Surround Modes – continued

Surround Mode

Description

Incoming Bitstream or Signal

DTS Neo:6

Mode Group

DTS Neo:6 analog processing is available with DTS and DTS 96/24 signals and

two-channel analog or PCM signals to create a 3-, 5- or 6-channel presentation.

See below

DTS Neo:6

Cinema

Depending on the number of speakers in your system, select 3-, 5- or 6-channel

modes, enhanced for movie or video presentations.

s $43 ꢇꢆꢇꢆꢁꢉ OR ꢁꢈꢅ ꢂꢆꢇꢆꢁꢉ OR ꢁꢈ

s $43 ꢎꢏꢆꢇꢌ

s !NALOG ꢊTWOꢃCHANNEL

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Z OR ꢌꢍK(Z

DTS Neo:6

Music

Available only in 5- and 6-channel modes, creates a surround presentation

suitable for music recordings.

s $43 ꢇꢆꢇꢆꢁꢉ OR ꢁꢈꢅ ꢂꢆꢇꢆꢁꢉ OR ꢁꢈ

s $43 ꢎꢏꢆꢇꢌ

s !NALOG ꢊTWOꢃCHANNEL

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Z OR ꢌꢍK(Z

Logic 7

Mode Group

A HARMAN proprietary technology, Logic 7 technology enhances two-channel

and matrix-encoded recordings by deriving separate information for the surround

back channels. It provides more accurate placement of sound, improves panning

and expands the sound field, even when used with 5.1-channel systems.

Logic 7 technology uses 96kHz processing and is available in 5.1-or 7.1-channel

modes. Three variants are available.

See below

Logic 7

Movie

Especially suited to two-channel sources containing Dolby Surround or matrix

encoding, Logic 7 Movie mode increases center-channel intelligibility. The AVR is

programmed at the factory to default to this mode for two-channel signals.

s !NALOG ꢊTWOꢃCHANNEL

s 4UNER

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Zꢅ ꢌꢍK(Zꢅ ꢎꢏK(Z

Logic 7

Music

Logic 7 Music mode is well suited to conventional two-channel music recordings.

s !NALOG ꢊTWOꢃCHANNEL

s 4UNER

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Zꢅ ꢌꢍK(Zꢅ ꢎꢏK(Z

Logic 7

Game

Use Logic 7 Game mode to enhance enjoyment of video-game consoles.

s !NALOG ꢊTWOꢃCHANNEL

s 4UNER

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Zꢅ ꢌꢍK(Zꢅ ꢎꢏK(Z

5-Channel Stereo

7-Channel Stereo

2-Channel Stereo

Useful for parties, the left- and right-channel information is played through both

the front and surround speakers on each side, while the center speaker plays a

summed mono mix.

s !NALOG ꢊTWOꢃCHANNEL

s 4UNER

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Zꢅ ꢌꢍK(Zꢅ ꢎꢏK(Z

Expands the 5-Channel Stereo presentation to include the surround back channels.

s !NALOG ꢊTWOꢃCHANNEL

s 4UNER

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Zꢅ ꢌꢍK(Zꢅ ꢎꢏK(Z

Turns off all surround processing and plays a pure two-channel signal or a downmix

of a multichannel signal. The signal is digitized and bass management settings are

applied, making it appropriate when a subwoofer is used.

s !NALOG ꢊTWOꢃCHANNELꢐ $30 DOWNMIX AVAILABLE FOR MULTICHANNEL

s 4UNER

s 0#- ꢊꢂꢇK(Zꢅ ꢌꢌꢁꢈK(Zꢅ ꢌꢍK(Zꢅ ꢎꢏK(Z

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Appendix

10 11 12 13 14

39 40 41 42

Refer to the numbered buttons when using the Function List in Table A13.

Remote Control Function List Reference

54 55 56 58

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Appendix

Table A13 – Remote Control Function List

Radio

Media Server

DMC1000

No.

Button Name

AVR

NETWORK/vTUNER

Blu-ray/DVD

USB/iPod

AVR Power On

AVR Power Off

AVR Power On

AVR Power Off

AVR Power On

AVR Power Off

AVR Power On

AVR Power Off

AVR Power On

AVR Power Off

AVR Power On

AVR Power Off

Power On

Power Off

Input Sel

Radio

Input Sel

Audio Effects

Video Effects

AVR Power On

AVR Power Off

AVR Power On

AVR Power Off

Power On

Power Off

Input Sel

Radio

Input Sel

Audio Effects

Video Effects

AVR Power On

AVR Power Off

03 Device Power On

04 Device Power Off

Off

Cable/Sat

Disc

DVR

Radio

Input Sel

Radio

Input Sel

Audio Effects

Video Effects

Input Sel

Radio

Input Sel

Audio Effects

Video Effects

Input Sel

Radio

Input Sel

Audio Effects

Video Effects

Input Sel

Radio

Input Sel

Audio Effects

Video Effects

Input Sel

Radio

Input Sel

Audio Effects

Video Effects

Input Sel

Radio

Input Sel

Audio Effects

Video Effects

USB

Game

Media Server

Network

AUX

Audio Effects

Video Effects

17 Surround Modes Surround Modes Surround Modes Surround Modes Surround Modes Surround Modes Surround Modes Surround Modes Surround Modes

36*

Last

Activity

Back/Exit

Last

Activity

Back/Exit

Left

Right

Light

Down

Last

Activity

Back/Exit

Left

Right

Light

Down

Prev. Ch

Activity

Last

Activity

Back/Exit

Left

Right

Light

Down

Activity

Back

Left

Enter

Right

Light

Down

Disc Menu

Angle

Subtitle

Audio

Zoom

Volume +

Volume –

AVR Mute

Activity

Back/Exit

Tune Up

Preset/Down

Preset/Up

Light

Tune Down

Activity

Back/Exit

Tune Up

Preset/Down

Preset/Up

Light

Tune Down

Activity

Clear

Left

Enter

Right

Light

Down

Disc Menu

Angle

Subtitle

Audio

Left

Right

Light

Down

Disc Menu

A (red)

B (green)

C (yellow)

D (blue)

Volume +

Volume –

Mute

Right

Light

Down

Source A

Source B

Source C

Source D

Zoom

Volume +

Volume –

AVR Mute

Volume +

Volume –

AVR Mute

Preset Up

Preset Down

Volume +

Volume –

AVR Mute

Preset Up

Preset Down

Volume +

Volume –

AVR Mute

Down

Volume +

Volume –

AVR Mute

Page Up

Page Down

Prev. Step

Pause

Next Step

Rew

Play

Volume +

Volume –

AVR Mute

Channel Up

Channel Down

Volume +

Volume –

AVR Mute

Page Up

Page Down

Pause

Rew

Play

Channel/Page Up Channel/Preset Up

Channel/Page Down Channel/Preset Down

Channel/Page Down

Prev. Step

Pause

58*

Pause

Rew

Play

Pause

Next Step

Rew

Play

Next Step

Rew

Play

Record

Stop

AVR

Info Settings

Sleep

Record

Stop

AVR Sel and Setup AVR Sel and Setup AVR Sel and Setup AVR Sel and Setup AVR Sel and Setup AVR Sel and Setup AVR Sel and Setup AVR Sel and Setup

Info Settings

Sleep

Zone Select

Learn

Info Settings

Sleep

Zone Select

Learn

Info Settings

Sleep

Zone Select

Learn

Info Settings

Sleep

Zone Select

Learn

Info Settings

Sleep

Zone Select

Learn

Info Settings

Sleep

Zone Select

Learn

Info Settings

Sleep

Zone Select

Learn

Info Settings

Sleep

Zone Select

Learn

Zone Select

Learn

* AVR 3700/AVR 370 only.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Appendix

Table A13 – Remote Control Function List – continued

DVR

AUX

No.

Button Name

Cable/SAT

Game

HDTV

AVR Power On

AVR Power Off

Power On

Power Off

Input Sel

Radio

Input Sel

Audio Effects

Video Modes

Surround Modes

PVD

AVR Power On

AVR Power Off

Power On

Power Off

Input Sel

Radio

Input Sel

Audio Effects

Video Modes

Surround Modes

TIVO

AVR Power On

AVR Power Off

Power On

Power Off

Input Sel

Radio

Input Sel

Audio Effects

Video Modes

Surround Modes

AVR Power On

AVR Power Off

Power On

Power Off

Input Sel

Radio

Input Sel

Audio Effects

Video Modes

Surround Modes

VCR

AVR Power On

AVR Power Off

Power On

Power Off

Input Sel

Radio

Input Sel

Audio Effects

Video Modes

Surround Modes

36*

AVR Power On

AVR Power Off

Device Power On

Device Power Off

AVR Power On

AVR Power Off

Power On

Power Off

Input Sel

Radio

Input Sel

Audio Effects

Video Modes

Surround Modes

AVR Power On

AVR Power Off

Play

Stop

Input Sel

Radio

Input Sel

Cable/Sat

Disc

DVR

Radio

USB

Game

Media Server

Network

AUX

Audio Effects

Video Modes

Surround Modes

Audio Effects

Video Modes

Surround Modes

Last

Activity

Back/Exit

Left

Right

Prev. Ch

Activity

Bypass

Left

Right

Light

Down

OSD

Guide

PPV

Fav. Ch

Music

Enter

Activity

Clear

Start

Left

Select

Right

Light

Down

DVD Menu

Prev. Ch

Activity

Exit/Cancel

Left

Enter

Right

Light

Down

OSD

Caption

Fav. Ch

MTS

Aspect

Volume +

Volume –

AVR Mute

Channel Up

Channel Down

Back

Pause

Replay

Rew

Instant Replay

Enter/Last

Activity

Exit

Left

Select

Right

Light

Down

TiVo

Window

Live TV

Slow

Activity

Exit

Left

Setup

Right

Light

Down

Activity

Cancel

Left

Enter

Right

Light

Down

OSD

Light

Down

Disc Menu

A (red)

B (green)

C (yellow)

D (blue)

Volume +

Volume –

Mute

Mark

Open/Close

Random Play

Repeat

Intro Scan

Volume +

Volume –

AVR Mute

(+10)

Disc Skip

Skip Down

Pause

Skip Up

R. Search

Repeat

Jump Up

Jump Down

Volume +

Volume –

AVR Mute

Page Up

Page Down

Prev. Step

Pause

Next Step

Rew

Play

Record

Stop

Skip

Volume +

Volume –

AVR Mute

Channel Up

Channel Down

Volume +

Volume –

AVR Mute

Scan Up

Scan Down

Slow Down

Pause

Volume +

Volume –

AVR Mute

Channel Up

Channel Down

Thumb Down

Pause

Thumb Up

Rew

Play

Volume +

Volume –

AVR Mute

Channel Up

Channel Down

Scan Down

Pause

Scan Up

Rew

Play

Channel/Page Up

Channel/Page Down

Pause

Rew

Play

Record

Stop

Setup

Info Settings

Sleep

Zone Select

Learn

58*

Slow Up

Prev.

Play

Record

Stop

Play

Subtitle

Stop

Record

Stop

F. Search

Time

Stop

Record

Stop

AVR Sel and Setup

Info Settings

Sleep

AVR Sel and Setup

Info Settings

Sleep

AVR Sel and Setup AVR Sel and Setup AVR Sel and Setup AVR Sel and Setup AVR Sel and Setup

Info Settings

Sleep

Info Settings

Sleep

Info Settings

Sleep

Info Settings

Sleep

Info Settings

Sleep

Learn

* AVR 3700/AVR 370 only.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Appendix

Refer to Tables A14 through A24 when programming the codes for your components into the remote.

Table A14 – Remote Control Product Codes: TV

TV Manufacturer/Brand

OPTONICA

ORION

Setup Code Number

077

TV Manufacturer/Brand

ADMIRAL

ANAM

Setup Code Number

192

207 208 209 210 211

045 106 109 112 122

PANASONIC

PHILCO

087 148 169

AOC

037 122 123 128

045 115 123 128 132 148

AUDIOVOX

BLAUPUNKT

BROKSONIC

CITIZEN

012

PHILIPS

033 034 035 036 123 128 132 145 148

084

PIONEER

POLAROID

PORTLAND

PROSCAN

PROTON

024 123 128

205 206

003 004 005 006 043

045 123 128 132

128 132

CONTEC

045

133

CRAIG

045 157 158 159

008 059 122 128 132 165

CROWN

045 132

QUASAR

032 087

CURTIS MATHES

DAEWOO

DAYTRON

DYNATECH

DYNEX

123 128 132

RADIO SHACK

RCA

045 128 132 180 196 197

045 087 102 105 106 108 111 114 116 119 127 128 132

021 115 123 128 133 145 161 163

128 132

REALISTIC

RUNCO

045 167 196

063

044 046 152 153

014

SAMPO

059 123 128

ELECTROHOME

EMERSON

FUJITSU

115 132

SAMSUNG

SANYO

020 022 124 128 132 145

045 123 128 132 139 157 158 159 162 205

026 054

041 042

SCOTT

045 128 132

FUNAI

045

SEARS

128 132 145

FUTURETECH

045

SHARP

077 128 132

029 087 121 123 128 133 145 159 163

SIEMENS

SIGNATURE

SONY

084

GRUNDIG

HALL MARK

HARMAN KARDON

HITACHI

193

069

128

028 031 117 130 136 194 212

201

SOUNDESIGN

SYLVANIA

SYMPHONIC

TANDY

045 128

123 128 132 144 147

025 123 128 145 148

HYTEK

016

184

INKEL

120

077

JC PENNEY

JENSEN

115 123 128 132 145

TATUNG

063

019

TECHNICS

TECHWOOD

TEKNIKA

181

JVC

079 087 134

128

KEC

045

045 069 115 123 128 132

KLH

006

TELERENT

TERA

069

KTV

045 123 132 162

156

LG/GOLDSTAR

LLOYTRON

LODGENET

LXI 077

002 013 101 110 122 128 132

THOMSON

TIVO

190 191

172 173

051 052 and See Table A24

069

TMK

128

145 148

TOSHIBA

TOTEVISION

VIDEO CONCEPTS

VIDTECH

VIEWSONIC

VIZIO

063 129 202

132

MAGNAVOX

MARANTZ

MEMOREX

METZ

030 040 123 128 132 145 148

115 123 148

160

069 128

128

084

011 038 039 047

001 002

MGA

115 123 128

MITSUBISHI

MTC

077 115 123 128 160 167 168

175 176

WARDS

069 128 132 148

017 018 023

123 128

WESTINGHOUSE

YAMAHA

NATIONAL

NEC

148 177 179 180 181 182

010 115 121 123 125

007

OLEVIA

YORK

128

ZENITH

069 090

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Appendix

VCR Manufacturer/Brand

NATIONAL

NEC

Setup Code Number

Table A15 – Remote Control Product Codes: AUX-HDTV

440

TV Manufacturer/Brand

Setup Code Number

318 348

APEX

614 616

NORDMENDE

OPTIMUS

ORION

348

DISH NETWORK

612

459

604

447

MAGNAVOX

MOTOROLA

RCA

607 608 609 610 611

605

PANASONIC

PHILCO

425 450 467 472

340

601 612

PHILIPS

340 375

SAMSUNG

TATUNG

TIVO

603

PORTLAND

PULSAR

394

618

376

See Table A24

602 606 619

QUASAR

301 425

ZENITH

RADIO SHACK

RCA

355 434 440 442 458 459

395 424 425 457 472

317 320 340 345 459

345 351 395 405 409

348 416 447

317 320

Table A16 – Remote Control Product Codes: AUX-VCR

REALISTIC

SAMSUNG

SANSUI

VCR Manufacturer/Brand

AIWA

Setup Code Number

340

AKAI

348 408 409 426

SANYO

AUDIO DYNAMICS

BROKSONIC

CANON

318 348

SCOTT

410 412

410 447

SEARS

317 320

435 440

SHARP

429 456

CAPEHART

CITIZEN

394

SONY

380 429

434

SOUNDESIGN

SYLVANIA

SYMPHONIC

TANDY

340

CRAIG

345 416

340

DAEWOO

DAYTRON

DBX

317 394 404

340

394

317 340

318 348

TEAC

340 348

DYNATECH

EMERSON

FISHER

340

TEKNIKA

340

313 340 342 410 412

THOMAS 340

TIVO See Table A24

TMK

317

FUNAI

340

313

376 395 424

TOSHIBA

412 455

345

HARMAN KARDON

HITACHI

302 303 318 349

TOTEVISION

UNITECH

340 348

345

JC PENNEY

JENSEN

318 345

VECTOR RESEARCH

VIDEO CONCEPTS

VIDEOSONIC

WARDS

318

348

318 340

345

JVC

318 348 411 432

KENWOOD

LG/GOLDSTAR

LLOYD

320 348

340 345 412

318 340 348

340 350 376 383

318 407

YAMAHA

340

ZENITH

LXI

320 340

MAGNAVOX

MARANTZ

MEMOREX

MGA

340

318

317 320 340 352 353 354 376 442

349

MITSUBISHI

MULTITECH

NAD

349 431

340

439

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Appendix

Table A17 – Remote Control Product Codes: AUX-CD

CD Manufacturer/Brand Setup Code Number

RCA

024 081 093 150

ADCOM

063 069

REALISTIC

SANSUI

058 093 095 104 105 108 164 166

047 081 134 157 172

033 082 095

AIWA

072 111 118 156 170

AKAI

050 177 184

SANYO

AUDIO TECHNICA

AUDIOACCESS

AUDIOFILE

BSR

053

SCOTT

108

125

SHARP

058 105 114 151 159 167 180 181

003 041 058 105 133

211

SHERWOOD

SONY

044

103 115 116 118 132 139 163 205 206 207 208 212 217

CALIFORNIA AUDIO

CAPETRONIC

CARRERA

CARVER

109

SOUNDSTREAM

SYMPHONIC

TAEKWANG

TEAC

124

070

059 110

087

177

136 140 141 143 144 145 185 186

011 058 085 086 106 107 110 121 137 146 154

CASIO

117 166

THETA DIGITAL

TOSHIBA

VECTOR RESEARCH

VICTOR

039

CLARINETTE

DENON

166

013 074 097 151 155 173

187 188 213

087

EMERSON

FISHER

052 093 108

120 130

055 095

WARDS

095

FUNAI

126

YAMAHA

YORK

019 031 053 061 135 169

166

164

HAITAI

099 214

HARMAN KARDON

HITACHI

001 002 025 054 190

Table A18 – Remote Control Product Codes: DVD

093

DVD Manufacturer/Brand Setup Code Number

INKEL

216

APEX DIGITAL

DENON

061

JC PENNEY

JENSEN

098 147

019 020 051

003 004

153

JVC

176 195 196

HARMAN KARDON

JVC

001 002 032

006

KENWOOD

LG/GOLDSTAR

LOTTE

030 062 078 079 148 151 176 178 181

016 087

LG/GOLDSTAR

MAGNAVOX

MARANTZ

MITSUBISHI

NAD

005 010 055 064 066

056

108

LUXMAN

LXI

077 102

059

164

023

MAGNAVOX

MARANTZ

MCINTOSH

MCS

039 113

062

058 084 191 192 193

ONKYO

009 048

194

PANASONIC

PHILIPS

008 024 030 044

016 056

080 098

MITSUMI

MODULAIRE

NAD

152

PIONEER

PROCEED

PROSCAN

RCA

018 027 041 065

060

166

013 074 197 198

199 200 201

003 004

NAKAMICHI

NEC

003 004

069

SAMSUNG

SHARP

017 053 054

028

NIKKO

053 055

ONKYO

037 038 045 046 171 175 202 203

065 089 091 092 099 104 212

075 109 119 158 183 204

039 138 149 209

071 094 100 112 123 131 161 162 215

210

SONY

011 012 015 043 045

003 004

OPTIMUS

PANASONIC

PHILIPS

THOMSON

TOSHIBA

YAMAHA

ZENITH

009 058 067

030 063

PIONEER

PROTON

RADIO SHACK

005 055 064

126 166 213

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Appendix

Table A19 – Remote Control Product Codes: SAT

Table A20 – Remote Control Product Codes: Game

SAT Manufacturer/Brand

BIRDVIEW

Setup Code Number

GAME Manufacturer/Brand Setup Code Number

425

Microsoft (XBOX, XBOX 360)

NYKO (PS3)

001 003

005

CHANNEL MASTER

CHAPARRAL

CITOH

320 321 325 361

315 316 451

SONY (PS2, PS3)

002 004

360

DIRECTV

309 310 314

Table A21 – Remote Control Product Codes: Cable

DISH NETWORK

DRAKE

364

Cable Manufacturer/Brand Setup Code Number

313 317 318 413 481

ABC

001 011

DX ANTENNA

ECHOSTAR

ELECTRO HOME

FUJITSU

331 352 379 483

ALLEGRO

AMERICAST

ARCHER

111

364 395 397 452 453 463 477 478 484 485

212

392

112

324 329 334

BELCOR

113

GENERAL INSTRUMENT

HITACHI

303 311 323 365 403 454 468 474

CABLE STAR

CITIZEN

033 113

304 455

111

HOUSTON TRACKER

HUGHES

463

COMCAST

DIGI LINK

EAGLE

007

305 306 437 489

114

JANIEL

366

186

JERROLD

454 468 484

EASTERN

EMERSON

GENERAL INSTRUMENT

GC ELECTRONICS

GEMINI

066 070

LEGEND

453

112

MACOM

317 365 369 370 371

001 011 017 096 097 210

MAGNAVOX

MEMOREX

461 473

113

453

032 060

MITSUBISHI

MOTOROLA

NEXTWAVE

NORSAT

307

HAMLIN

056 099 100 101 117 175 208

312 319

HITACHI

001 188

423

JASCO

111

373

JERROLD

LINSAY

001 002 011 017 073 096 097 162 188 210

OPTIMUS

466

118

PACE

328 487

MACOM

191

PANASONIC

PANSAT

353 366 457 469

MAGNAVOX

MOVIETIME

NSC

017 019 068

035 039

420

PERSONAL CABLE

PHILIPS

418

035 190

375

OAK

197 220

PICO

407

PACE

179

PRESIDENT

RCA

381 404

PANASONIC

PANTHER

PHILIPS

053 176 177 189 214

114

301 358 439 458 465 490

REALISTIC

349 480

013 019 020 085 090

001 041 119 171 209 215 216

111 112 213

053 214

SAMSUNG

322 326 442

PIONEER

RADIO SHACK

RCA

SATELLITE SERVICE CO

SCIENTIFIC ATLANTA

SONY

335 388

339 356

362 405

RECOTON

REGAL

116

STAR CHOICE DBS

STARCAST

SUPER GUIDE

TELECOM

459

056 099 100 101 208

032

347

REMBRANT

SAMSUNG

SCIENTIFIC ATLANTA

SEAM

327 423

003 072 186

183 203 221 222

121

330 333 390 391 393 409

302 426 460 461 462 470

TOSHIBA

323 332 348 349 350 351 354 355 381 383 389 403 466

479 480

SIGNATURE

SPRUCER

001 188

UNIDEN

ZENITH

053 081 177 189

359 384 385 387 394 419 488

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR

Appendix

Table A21 – Remote Control Product Codes: Cable – continued

Table A24 – Remote Control Product Codes: AUX- TiVo

Cable Manufacturer/Brand Setup Code Number

Manufacturer/Brand

COMCAST TIVO

COX TIVO

Setup Code Number

STARCOM

STARGATE

TANDY

002 011 163

808

806

803

805

801

807

804

802

803

120

024

DIRECTV TIVO

TELECAPATION

TEXSCAN

TFC

028

HUMAX TIVO

036

Nero LiquidTV TIVO

PIONEER TIVO

122

TIVO

029 030 and See Table A24

170 205

TIVO HD XL DVR

TIVO HD DVR

TIVO SERIES2^™DT DVR

TOCOM

UNITED CABLE

UNIVERSAL

VIDEOWAY

VIEWSTAR

ZENITH

011

033 034 039 042 113

124 211

TOSHIBA TIVO

019 025 053 086 089 190

065 125 211 219

Table A22 – Remote Control Product Codes: Media Server

Manufacturer/Brand

APPLE

Setup Code Number

008 009

BEYOND

003

ESCIENT (FIREBALL)

HARMAN KARDON

LOGITECH

004 005 006 007

001 002

012

MICROSOFT

NAIM

003

011

REQUEST

010

SONOS

013

Table A23 – Remote Control Product Codes: AUX-Cable/SAT

Recorder (PVR)

Manufacturer/Brand

DAEWOO

Setup Code Number

701 704

ECHOSTAR

EXPRESSVU

HUGHES

714 715 716

714

717 727

HYUNDAI

718

PANASONIC

PHILIPS

710 723

711 717 724 727

719

PROSCAN

RCA

719 727

REPLAYTV

SONICBLUE

SONY

708 710 712 725 726

710 712

707 713 720 721 722 723 724

Download from Www.Somanuals.com. All Manuals Search And Download.

HARMAN Consumer, Inc.

8500 Balboa Boulevard, Northridge, CA 91329 USA

Harman Kardon and Logic 7 are trademarks of HARMAN International Industries, Incorporated, registered in the United States and/or

other countries. EzSet/EQ is a trademark of HARMAN International Industries, Incorporated.

Blu-ray Disc is a trademark of the Blu-ray Disc Association.

CEA is a registered trademark of the Consumer Electronics Association.

DLNA is a registered trademark of the Digital Living Network Alliance.

Manufactured under license from Dolby Laboratories. Dolby, the double-D symbol and Pro Logic are registered trademarks of Dolby

Laboratories. MLP Lossless is a trademark of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,003,467 and

other U.S. and worldwide patents issued and pending. DTS, DTS-ES and DTS Neo:6 are registered trademarks, and DTS 96/24, DTS-

HDMI, the HDMI logo and High-Definition Multimedia Interface are registered trademarks of HDMI Licensing LLC in the United States

and other countries.

Intel is a registered trademark of Intel Corporation.

Apple, iPhone, iPod, iPod touch, iTunes and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.

TiVo is a registered trademark of TiVo Inc. Series2 is a trademark of TiVo, Inc.

Windows Media is a registered trademark of Microsoft Corporation in the United States and/or other countries.

Features, specifications and appearance are subject to change without notice.

Part No. HKP4053 Rev. A

www.harmankardon.com

Download from Www.Somanuals.com. All Manuals Search And Download.

Gravely Lawn Mower 985103 User Manual
Hach Universal Remote sc100TM User Manual
Hauppauge Computer Drive WinTV User Manual
Honeywell Electric Heater HZ 510 User Manual
Honeywell Marine Radio TE821W User Manual
HP Hewlett Packard Plumbing Product J9020A User Manual
HP Hewlett Packard Scanner 7400c User Manual
Hypertec Carrying Case N17328LHY User Manual
IBM Work Light REDP 4372 00 User Manual
Image Treadmill 831297572 User Manual