Harman Kardon Home Theater System AVR65 User Manual

Introduction

Congratulations! With the purchase

of a Harman Kardon AVR65 you are

about to begin many years of listening

enjoyment. The AVR65 has been custom

designed to provide all the excitement

and detail of movie sound tracks and

every subtle nuance of musical selec-

Description an d Features

Harman Kardon invented the high-

fidelity receiver over forty-five years ago.

With state-of-the-art circuitry and time-

honored circuit designs, the AVR65 is

undoubtedly the finest receiver ever

offered by Harman Kardon.

The AVR65 is a full-featured A/V receiver,

incorporating a wide variety of listening

options. In addition to Dolby Digital and

DTS decoding, Dolby Pro Logic and

Dolby 3 Stereo are available for compati-

bility with the tens of thousands of movies

and television programs encoded with

analog surround information. A choice of

Hall and Theater modes is also available

for use with both encoded sources and

traditional two-channel stereo recordings.

tions. With onboard Dolby Digital and

■ Onboard Dolby Digital and

DTS Decoding

†

DTS Decoding, the AVR65 delivers six

discrete channels of audio that take

advantage of the digital sound tracks

from the latest DVD and LV releases and

Digital Television broadcasts.

■ Coax and Optical Digital Inputs

■ On-Screen Menu Displays

■ Backlit, Programmable Remote

A total of five audio/video inputs, each

with both composite and S-Video, as

well as three additional audio-only

inputs are selected through a learning

remote control and an easy-to-read front

panel display or on-screen graphics

through a TV monitor. Multiroom

operation is available with independent

source and volume selection.

Control

While complex digital systems are hard

at work within the AVR65 to make all of

this happen, hookup and operation are

simple. Color-keyed connections, a back-

lit, programmable remote control and

on-screen menus make the AVR65 easy to

use. To obtain the maximum enjoyment

from your new receiver, we urge you to

take a few minutes to read through this

manual. This will ensure that connec-

tions to speakers, source playback units

and other external devices are made

properly. In addition, a few minutes spent

learning the functions of the various con-

trols will enable you to take advantage of

all the power the AVR65 is able to deliver.

■ Composite and S-Video Switching

■ Complete Multiroom Control

■ 6-Channel Direct Input and Preamp

Output for ALL Channels Permits

Ease of Expansion

The AVR65’s powerful amplifier uses

traditional Harman Kardon High Current

design philosophies to meet the wide

dynamic range of any program selection.

If you have any questions about this

product, its installation or operation,

please contact your retailer or custom

installer. They are your best local source

of information.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety Information

Clean in g

■ Reorient or relocate the receiving

antenna.

If you do not wish to save the packaging

materials, please note that the carton

and other sections of the shipping protec-

tion are recyclable. Please respect the

environment and discard those materials

at a local recycling center.

When the unit gets dirty, wipe it with a

clean, soft, dry cloth. If necessary, wipe it

with a soft cloth dampened with mild

soapy water, then a fresh cloth with clean

water. Wipe dry immediately with a dry

cloth. NEVER use benzene, aerosol

cleaners, thinner, alcohol or any other

volatile cleaning agent. Do not use

abrasive cleaners, as they may damage

the finish of metal parts. Avoid spraying

insecticide near the unit.

■ Increase the separation between the

equipment and receiver.

■ Connect the equipment into an outlet

on a circuit different from that to

which the receiver is connected.

Typographic Conventions

■ Consult the dealer or an experienced

radio/TV technician for help.

In order to help you use this manual

with the remote control, front panel

controls and rear panel connections,

certain conventions have been used.

This device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) this device

may not cause harmful interference, and

(2) this device must accept interference

received, including interference that may

cause undesired operation.

Movin g th e Un it

EXAMPLE – (bold type) indicates a

specific remote control or front panel

button, or rear panel connection jack

Before moving the unit, be certain to dis-

connect any interconnection cords with

other components, and make certain

that you disconnect the unit from the AC

outlet.

EXAMPLE– (OCR type) indicates a

message that is visible on the front panel

information display

NOTE: Changes or modifications may

cause this unit to fail to comply with

Part 15 of the FCC Rules and may void

the user’s authority to operate the

equipment.

Im portan t In form ation For th e User

NOTE: This equipment has been tested

and found to comply with the limits for

a Class-B digital device, pursuant to Part

15 of the FCC Rules. The limits are

designed to provide reasonable protection

against harmful interference in a

residential installation. This equipment

generates, uses and can radiate radio-

frequency energy and, if not installed and

used in accordance with the instructions,

may cause harmful interference to radio

communication. However, there is no

guarantee that harmful interference will

not occur in a particular installation.

If this equipment does cause harmful

interference to radio or television recep-

tion, which can be determined by turning

the equipment off and on, the user

is encouraged to try to correct the inter-

ference by one or more of the following

measures:

EXAMPLE – (bold type) indicates a lit

indicator in the front panel information

display

1 – (number in a square) indicates a

specific front panel control

Unpacking

a – (number in an oval) indicates a

button or indicator on the remote

The carton and shipping materials used

to protect your new receiver during ship-

ment were specially designed to cushion

it from shock and vibration. We suggest

that you save the carton and packing

materials for use in shipping if you move,

or should the unit ever need repair.

¡ – (number in a circle) indicates a

rear panel connection

A – (letter in a square) indicates an

indicator in the front panel display

To minimize the size of the carton in

storage, you may wish to flatten it. This

is done by carefully slitting the tape

seams on the bottom and collapsing the

carton down to a more two-dimensional

appearance. Other cardboard inserts may

be stored in the same manner. Packing

materials that cannot be collapsed

should be saved along with the carton in

a plastic bag.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel Controls

¯ ˆ

AVR 65

Volume

Speaker Multi Room Dig. Select Delay

DIGITAL

Set

AC-3

•

T M

VID 1

VID 2

VID 3

6 CH

AM/ FM

NIN

SET SC

N M

DIGITAL

PRO L

GIC

3-ST

HALL 1

HALL 2

SURR. OFF

Mute

Power

Phones

Bass

Treble

Balance

VIDEO 3

Min

Max

Min

Max

Video

Audio

9 )!

*( ÓÔ



ÚÛ

1 Main Power Switch

2 System Power Control

3 Power Indicator

4 Headphone Jack

5 Bass Control

# 6-Channel Direct Selector

$ AM/FM

Û Mute

Ù Volume Control

ı Delay

% Tuning Button

^ Preset Scan

ˆ Digital Input Selector

˜ Set Button

& Preset Stations Selector

* Tune Mode

6 Treble Control

¯ Multiroom Selector

7 Balance Control

8 Video 3 Inputs

9 T•Mon Selector

) CD

( Dolby Digital Selector

Ó Dolby Pro Logic Selector

Ô Dolby 3 Stereo Selector

 Analog Surround Mode Selectors

Ò DTS Selector

˘ Speaker Select Button

¸ Selector Buttons

33 Information Display

34 Remote Sensor Window

! DVD Input Selector

@ Video Input Selectors

Ú Surround Off

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel Controls

1 Main Power Switch: Press this

button to apply power to the AVR65.

When the switch is pressed in, the

unit is placed in a Standby mode, as

indicated by the amber LED 3 sur-

rounding the System Power control

2. This button MUST be pressed in

to operate the unit. To turn the unit

off and prevent the use of the remote

control, this switch should be press

this switch until it pops out from the

front panel so that the word “OFF”

may be read at the top of the switch.

6 Treble Control: Turn this control

to modify the high-frequency output

of the left/right channels by as much

as ±10dB. Set this control to a

suitable position for your taste and

room acoustics.

@ Video Input Selectors: Press

one of these buttons to select a

source connected to the rear panel

Audio/Video inputs £ ﬂ, or the

front panel Video 3 input 8.

# 6-Channel Direct Selector:

Press this button to select the output

of an optional, external 6-channel

decoder connected to the 6-Ch

Direct inputs ∞ as the listening

source.

7 Balance Control: Turn this

control to change the relative volume

for the front left/right channels.

NOTE: For proper operation of the

surround modes this control should

be at the midpoint, or “12 o’clock”

position.

$ AM/FM: Press this button to

select the tuner as the AVR65’s input

source. When it is first pressed the

last station tuned will be heard.

Press it again to change between

AM and FM bands.

NOTE: In normal operation this

switch is left in the “ON” position.

8 Video 3 Inputs: These audio/

video inputs may be used for tempo-

rary connection of video games,

camcorders, digital still cameras or

portable audio products. To select a

source connected to these jacks,

press the Vid 3 Input Selector @.

2 System Power Control: When

the Main Power Switch

is “ON,”

press this button to turn on the

AVR65; press it again to turn the unit

off. Note that the Power Indicator

% Tuning Button: Press the left

side of the button to tune lower

frequency stations and the right side

of the button to tune higher frequency

stations. When a station with a strong

signal is reached, the TUNED indicator

T will illuminate in the Information

surrounding the switch

green when the unit is on.

will turn

9 T•Mon Selector: Press this but-

ton to select the device connected

to the Tape Monitor jacks e as the

listening source. The previously

selected source will continue to

show in the Information Display

33, and the red LED above the

button will illuminate to remind you

that you are listening to the tape

monitor output.

3 Power Indicator: This LED will

illuminate in amber when the unit is

in the Standby mode to signal that

the unit is ready to be turned on.

When the unit is in operation, the

indicator will turn green.

Display 33

^ Preset Scan: Press this button

to automatically scan through the

stations that have been programmed

in the AVR65’s memory. The tuner

will play five seconds of each station

before moving to the next preset

station. To stop the scan when the

desired station is heard, press the

button again. (See page 29 for more

information on the tuner memory

system.)

4 Headphone Jack: This jack may

be used to listen to the AVR65’s out-

put through a pair of headphones.

Be certain that the headphones

) CD: Press this button to select

the device connected to the CD

Input jacks § as the listening

source.

have a standard /4" stereo phone

plug.

5 Bass Control: Turn this control to

modify the low-frequency output of

the left/right channels by as much as

±10dB. Set this control to a suitable

position for your taste and room

acoustics.

! DVD Input Selector: Press this

button to select the device connect-

ed to the DVD Input jacks ¶ as the

listening and viewing source.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel Controls

& Preset Stations Selector: Press

this button to select stations that

have been entered into the preset

memory. (See page 29 for more

information on tuner programming.)

 Analog Surround Mode

˜ Set Button: When making

choices during the setup and con-

figuration process, press this button

to enter the desired setting, as

shown in the Information Display

33, into the AVR65’s memory.

Selectors: Press one of these

buttons to select the analog sur-

round modes. These modes may

be used with any analog program

source to create a pleasing surround

effect. (See page 25 for more

information on surround modes.)

* Tune Mode: Press this button to

select the stereo or mono mode for

FM tuning. In the STEREO mode a

Stereo indicator R will illuminate in

the information display, and stereo

reception will be provided when sta-

tions are transmitting stereo signals.

In the MONO mode the left and right

signals from stereo broadcasts will

be mixed together and reproduced

through all channels. Select MONO

for better reception of weak signals.

¯ Multiroom Selector: Press this

button to activate the AVR65’s

Multiroom system. (See pages 31-32

for complete information on

Ò DTS Selector: Press this button

to select DTS decoding when listen-

ing to an audio or video program

that is encoded with DTS data. (See

page 25 for more information on

surround modes and digital audio.)

Multiroom operation.)

˘ Speaker Select Button: Press

this button to begin the process of

selecting the speaker positions that

are used in your listening room. (See

page 18 for more information on

setup and configuration.)

Ú Surround Off: Press this button

to turn off all surround processing,

and to listen to a program in tradi-

tional stereo from the left front and

right front speakers only.

( Dolby Digital Selector: Press

this button to select the Dolby Digital

surround mode when listening to a

program that carries the Dolby

Digital information. (See pages 28-28

for more information on surround

modes and digital audio.)

¸ Selector Buttons: When you are

establishing the AVR65’s configura-

tion settings, use these buttons to

select between the choices avail-

able, as shown in the Information

Û Mute: Press this button to

momentarily silence the speaker

output of the AVR65.

Display 33

Ù Volume Control: Turn the knob

clockwise to increase volume,

counterclockwise to decrease the

volume.

Ó Dolby Pro Logic Selector: Press

this button to select the Dolby Pro

Logic surround mode when listening

to an analog program that is encoded

with surround-sound information.

(See page 25 for more information

on surround modes.)

33 Information Display: This

display delivers messages and

status indications to help you

operate the receiver. (See page 7

for a complete explanation of the

Information Display.)

ı Delay: Press this button to begin

the sequence of steps required to

enter delay time settings. (See page

21 for more information on delay

times.)

34 Remote Sensor Window: The

sensor behind this window receives

infrared signals from the remote con-

trol. Aim the remote at this area and

do not block or cover it unless an

external remote sensor is installed.

Ô Dolby 3 Stereo Selector: Press

this button to select the Dolby 3

Stereo listening mode. This mode is

used primarily when a program has

surround information when a center

channel speaker, but no surround

speakers, is installed. (See page 25

for more information on surround

modes.)

ˆ Digital Input Selector: When

playing a source that has a digital

output, press this button to select

between the Optical · and Coaxial

° Digital inputs. (See page 27 for

more information on digital audio.)

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel Information Display

S R

SLEEP

MUTE

TUNED

MONO STEREO

AUTO

MEMORY

PRESET

BYPASS

DIGITAL

OPT

PRO LOGIC

COAX AC-3

STEREO

PCM

HALL 1

MULTI

HALL 2

NIGHT

THEATER

DTS

ANALOG

A Mute

I PCM Indicator

Q Auto

B Bypass

C Analog

J Analog Surround Mode Indicators

K Multiroom System Indicator

L Night Indicator

R Stereo Indicator

S Mono Indicator

D Dolby Digital Indicator

E Optical Source

T Tuned Indicator

U Main Information Display

V Sleep Indicator

M DTS Indicator

F Analog Dolby Surround Mode Indicators

G Coax Source

N Preset Number

O Preset Indicator

H AC-3 Indicator

P Memory

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel Information Display

A Mute: This indicator illuminates

I PCM Indicator: This indicator

illuminates to show that a standard

PCM (SP/DIF) digital audio signal

is being decoded by the digital-to-

analog converter.

P Memory: This indicator flashes

when entering presets and other

information into the tuner’s memory.

to remind you that the AVR65’s out-

put has been silenced by pressing

the Mute button Û d. Press the

Mute button again to return to the

previously selected output level.

Q Auto: This indicator illuminates

when the “Auto” mode is in use for

FM tuning.

J Analog Surround Mode

B Bypass: This indicator illumi-

nates when the surround processing

has been disabled by pressing the

Surround Off button Ú. When this

indicator is lit, the AVR65 will play tra-

ditional stereo sound using the front

left and front right speakers only.

Indicators: These indicators illumi-

nate when one of the DSP generated

analog surround modes is in use

with an analog input source.

R Stereo Indicator: This indicator

illuminates when an FM station is

being tuned in stereo.

K Multiroom System Indicator:

This indicator illuminates when the

multiroom system is in operation.

(See page 31 for more information on

the multiroom system.)

S Mono Indicator: This indicator

illuminates when the tuner has been

placed in the monaural mode by

pressing the Tune Mode button *.

Set the tuner for mono listening to

cut noise and improve the quality of

distant stereo signals.

C Analog: This indicator illuminates

when an analog input source is in use.

D Dolby Digital Indicator: This

indicator illuminates when a Dolby

Digital source is being played.

L Night Indicator: This indicator

lights when the AVR65 is in the Night

mode, which prevents the AVR65

from loud playback when digital

sources are in use.

T Tuned Indicator: This indicator

illuminates when a station is being

received with sufficient signal

strength to allow for acceptable

listening quality.

E Optical Source: This indicator

illuminates when a digital source

is in use via a connection to the

Optical Digital input ·.

M DTS Indicator: This indicator

illuminates when a DTS encoded

source is playing.

U Main Information Display: This

display shows messages relating to

the status, input source, surround

mode, tuner, volume level or other

aspects of unit’s operation.

F Analog Dolby Surround Mode

Indicators: These indicators illumi-

nate when one of the analog (matrix)

Dolby Surround modes is in use.

N Preset Number: This two-digit

display indicates the station preset

number that is currently in use, or

that is being entered.

G Coax Source: This indicator illu-

minates when a digital source is in

use via a connection to the Coaxial

Digital input °.

V Sleep Indicator: This indicator is

illuminated when the Sleep function

is in use. The number that appears

above the indicator is the number of

minutes remaining before the AVR65

will return to the Standby mode.

O Preset Indicator: This indicator

illuminates when one of the stations

entered into the preset memory is

tuned. The number that appears

below the indicator is the preset

station’s memory.

H AC-3* Indicator: This indicator

illuminates when the AVR65 is

decoding a Dolby Digital input

source.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel Connections

ﬂ f edb a ·° c

‡ ﬂ£¢¶

ﬁ

DIGITAL INPUT

VIDEO

MODEL NO. AVR-65

HARMAN KARDON

TAPE

OPTICAL

COAXIAL

AC 120V 60 Hz

3.5A

MONITOR

OUT

MONITOR

OUT

NORTHRIDGE

CALIFORNIA, USA

VIDEO

VIDEO 2

ANTENNA

REMOTE CONTROL

OUT

AC OUTLETS

(120V.60Hz)

VIDEO

VIDEO 1

TOTAL 150W or 1.5A MAX

MULTI

OUT

DVD

OUT

DVD

GND

UNSWITCHED

TOTAL 100W or 1A MAX.

MULTI

OUT

(75Ω)

FRONT

CENTER

SURROUND

FRONT

SURR.

CENTER

SWITCHED

TOTAL 150W or 0.5A MAX.

RIGHT

LEFT

CENTER

RIGHT

LEFT

SERIAL NO.

SUB WOOFER SR

6 CH. DIRECT

CENTER SUB WOOFER

PRE OUT

SPEAKERS 8 Ohms

SPEAKER 8 Ohm

SPEAKERS 8 Ohms

™ ¢

•

‚

›

£ ∞

⁄

‹

¡ AM Antenna

™ FM Antenna

‚ Front

· Optical Digital Input

a Remote IR In

b Remote IR Out

c Multi

⁄ Center

¤ Surround

£ Video 1 Inputs

¢ Video 1 Outputs

‹ Unswitched AC Outlet

› Switched AC Outlet

ﬁ Power Cable

∞ 6-Channel Direct Inputs

§ CD Inputs

d Multiroom Audio Outputs

e Tape Monitor In

¶ DVD Inputs

ﬂ Video 2 Inputs

f Tape Monitor Out

• Pre-Outs

‡ TV Monitor Video Output

° Coaxial Digital Input

ª Subwoofer Pre-Out

¡ AM Antenna: Connect the AM

loop antenna supplied with the

receiver to these terminals. If an

external AM antenna is used, make

connections to the AM and GND

terminals in accordance with the

instructions supplied with the

antenna.

£ Video 1 Inputs: Connect these

jacks to the audio and video

PLAY/OUT jacks of a VCR.

§ CD Inputs: Connect these jacks

to the output of a compact disc

player or CD changer.

¢ Video Outputs 1: Connect these

jacks to the audio and video

RECORD/IN jacks of a VCR.

¶ DVD Inputs: Connect the analog

audio outputs and composite video

output of a DVD or LV player to these

jacks.

∞ 6-Channel Direct Inputs: If an

external digital audio decoder is

used, connect the outputs of that

decoder to these jacks.

™ FM Antenna: Connect an indoor

or external FM antenna to this

terminal.

• Pre-Outs: If external power

amplifiers are used for any channels,

connect them to these jacks.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel Connections

ª Subwoofer Pre-Out: Connect

this jack to the line level input of a

powered subwoofer. If an external

subwoofer amplifier is used, connect

this jack to the subwoofer amplifier

input.

ﬁ Power Cable: Connect the AC

plug to a non-switched AC wall

output

a Remote IR In: If the AVR65’s front

panel IR sensor is blocked due to

cabinet doors or other obstructions,

an external IR sensor may be used.

Connect the output of the sensor to

this jack.

ﬂ Video 2 Inputs: Connect these

jacks to the audio and video outputs

of a TV Tuner, Cable TV converter

box, satellite receiver or any other

audio/video source.

‚ Front: Connect these terminals

to the front left/right speakers.

b Remote IR Out: This connection

permits the IR sensor in the receiver

to serve other remote controlled

devices. Connect this jack to the “IR

IN” jack on Harman Kardon or other

compatible equipment.

⁄ Center: Connect these terminals

to the center speaker.

‡ TV Monitor Video Output:

Connect this jack to the standard

(composite) video input of a TV

monitor or video projector to view

the on-screen menus and the

output of any standard video source

selected by the receiver’s video

switcher.

¤ Surround: Connect these

terminals to the surround speakers.

c Multi: Connect the output of

an IR sensor in a remote room to

this jack to operate the AVR65’s

multiroom control system.

‹ Unswitched AC Outlet: This

outlet may be used to power any AC

device. The power will remain on at

this outlet regardless of whether the

AVR65 is on or off.

° Coaxial Digital Input: Connect

the coax digital output from a DVD

player, HDTV receiver, LV player or

CD player to this jack. The signal may

be either a Dolby Digital (AC-3) sig-

nal, DTS signal or a standard PCM

digital source.

d Multiroom Audio Outputs:

Connect these jacks to the inputs of

an optional audio power amplifier so

that the input selected by the multi-

room control system will be heard in

a remote room.

NOTE: The power consumption of

the device plugged into each of

these outlets should not exceed

100 watts.

e Tape Monitor In: Connect these

jacks to the PLAY/OUT jacks of an

audio recorder.

› Switched AC Outlet: This outlet

may be used to power any device

that you wish to have turn on when

the unit is turned on with the System

Power Control switch 2.

· Optical Digital Input: Connect

the optical digital output from a DVD

player, HDTV receiver, LV player or

CD player to this jack. The signal

may be either a Dolby Digital (AC-3)

signal, a DTS signal or a standard

PCM digital source.

f Tape Monitor Out: Connect

these jacks to the RECORD/INPUT

jacks of an audio recorder.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control Functions

a AVR Selector

b Device Control Selectors

c Power Button

d Mute

e Test

f Display/Multiroom

⁄

Buttons

‹

/Channel Button

i Set Button

j Night Mode

k Source Selectors

l Numeric Keys

m Direct/Enter

n Memory Button

o OSD Button

p Light Button

q Tuner Mode

r Clear Button

s Preset Up/Down

t Tuning Up/Down

u Transport Controls

v Delay/Prev Ch.

›

/Digital Button

x Speaker Configuration

y Surround Mode Selector

z Volume

` Sleep Button

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control Functions

IMPORTANT NOTE: The AVR65’s

remote may be programmed to con-

trol up to eight devices, including

the AVR65. Before using the remote,

it is important to remember to press

the Device Control Selector button

a b that corresponds to the unit

you wish to operate. In addition, the

AVR65’s remote is shipped from

the factory to operate the AVR65

and Harman Kardon CD players

and cassette decks. The remote is

also capable of operating a wide

variety of other products using the

control codes that are part of the

remote. Before using the remote with

other products, follow the instruc-

tions on pages 33–34 to program the

proper codes for the products in

your system.

d Mute: Press this button to

i Set Button: This button is used

to enter settings into the AVR65’s

memory. It is also used in the setup

procedures for delay time, speaker

configuration and channel output

level adjustment.

momentarily silence the AVR65 or TV

set being controlled, depending on

which device has been selected.

When the AVR65 remote is being pro-

grammed to operate another device,

this button is pressed with the Device

Control Selector button b to

begin the programming process.

(See page 33 for more information

on programming the remote.)

j Night Mode: Press this button

to activate the “Night” mode, pre-

venting loud playback when the

digital modes are in use without

altering the dynamic range of the

output signal.

e Test: Press this button to begin

the sequence used to calibrate the

AVR65’s output levels. (See page 20

for more information on calibrating

the AVR65.)

When the AVR65 remote is being pro-

grammed to operate other devices,

this button is pressed to begin a

readout of a programmed code.

(See page 33 for more information.)

f Display/Multiroom Button:

This button does not function with

the AVR65, but it is available for use

with other devices.

k Source Selectors: Press these

buttons to select an input source for

the AVR65. The AM/FM button is also

used to switch between frequency

bands when the tuner is in use.

It is also important to remember that

many of the buttons on the remote

take on different functions, depend-

ing on the product selected using

the Device Control Selectors. The

descriptions shown here primarily

detail the functions of the remote

when it is used to operate the

g ^⁄

Buttons: These are multi-

purpose buttons. They will be used

most frequently to select a surround

mode. To change the surround mode,

NOTE: Pressing one of these buttons

selects the source only. In order to

control the actual source machine

using the remote you must press the

Device Control Selector button b

for the desired product.

first press the SURR/CH

button

AVR65. (See pages 33–36 for infor-

mation about alternate functions for

the remote’s buttons.)

y. Next press these buttons to

scroll up or down through the list of

surround modes that appear in the

Information Display 33. (See page

28 for more information.) These

buttons are also used to increase

or decrease output levels used to

lower the AVR65’s output levels when

configuring the unit with either the

internal test tone or and external

source. (See pages 20 and 30 for

more information.) They are also used

to enter delay time settings after the

Delay button v has been pressed.

(See page 21 for more information.)

a AVR Selector: Press this button

to use the remote control for operation

of the AVR65. Note that the button will

briefly turn red after it has been

l Numeric Keys: These buttons

serve as a ten-button numeric key-

pad to enter tuner preset positions.

They are also to be used to select

channel numbers when TV has been

selected on the remote, or to select

track numbers on a CD, DVD or LD

player, depending on how the

pressed to confirm your selection.

b Device Control Selectors:

Press one of these buttons to use

the remote to control the functions

of another audio/video device. Note

that the button will briefly turn red

after it has been pressed to confirm

your selection. (See pages 33–34 for

information on programming the

AVR65’s remote to operate these

devices.)

remote has been programmed.

m Direct/Enter: Press this button

to select a radio station by entering

its frequency using the Numeric

Keys l. (See page 29 for more

information.)

‹

/Channel Button: This

button is used to start the process of

setting the AVR65’s output levels to an

external source. Once this button is

⁄

pressed, use the

buttons g to

c Power Button: Press this button

to turn the currently selected device

on or off.

select the channel being adjusted,

then press the Set button i, fol-

⁄

lowed by the

buttons again to

change the level letting. (See page 20

for more information.)

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control Functions

select the channel you wish to set up.

Press the Set button i, and then

select another channel to configure.

When all adjustments have been

completed, press the Set button

twice to exit the settings and return

to normal operation. (See page 18

for more information.)

t Tuning Up/Down: When the

tuner is in use, these buttons will

tune up or down through the select-

ed frequency band. If the Tuner

Mode button q has been pressed

so that the AUTO indicator Q is illu-

minated, pressing these buttons will

cause the tuner to seek the next sta-

tion with acceptable signal strength

for quality reception. When the AUTO

indicator Q is NOT illuminated,

pressing these buttons will tune sta-

tions in single-step increments. (See

page 29 for more information.)

n Memory Button: Press this

button to enter a radio station into

the AVR65’s preset memory. After

pressing the button the MEMORY

indicator P will flash, and you then

have five seconds to enter a present

memory location using the Numeric

Keys l. (See page 29 for more

information.)

y Surround Mode Selector: Press

this button to begin the process of

changing the surround mode. After

the button has been pressed, use

NOTE: Although the word “Sleep”

appears above this button, it refers

to control of devices other than the

AVR65. Use the Sleep button ` to

control the AVR65’s Sleep function.

⁄

the

buttons g to select the

desired surround mode. (See page

25 for more information.) Note that this

button is also used to tune channels

when the TV is selected using the

Device Control Selector b.

u Transport Controls: These con-

trols do not control any functions of

the AVR65, but they are used exten-

sively when operating a wide variety

of CD players, cassette decks and

VCRs. (See page 33 for information

on programming the remote to utilize

these buttons.)

o OSD Button: Press this button to

view the on-screen displays. (See

page 23 for more information.)

When the AVR65 remote is being pro-

grammed for the codes of another

device, this button is also used in the

“Auto Search” process. (See page 33

for more information on programming

the AVR65 remote.)

p Light Button: Press this button

to activate the remote’s built-in back-

light for better legibility of the buttons

in a darkened room.

v Delay/Prev Ch.: Press this but-

ton to begin the process for setting

the delay times used by the AVR65

when processing surround sound.

After pressing this button the delay

times are entered by pressing the

Set button i, and then using the

q Tuner Mode: Press this button

when the tuner is in use to select

between automatic tuning and

manual tuning. When the button is

pressed so that the AUTO indicator

Q goes out, pressing the Tuning

buttons t will move the frequency

up or down in single-step incre-

ments. When the FM band is in

use, pressing this button when a

station’s signal is weak will change

to monaural reception, as indicated

by the MONO indicator S. (See page

29 for more information.)

z Volume: Press these buttons to

raise or lower the system volume.

` Sleep Button: Press this button

to place the unit in the Sleep mode.

After the time shown in the display,

the AVR65 will automatically go into

the Standby mode. Each press of

the button changes the time until

turn-off in the following order:

⁄

buttons g to change the set-

ting. Press the Set button again to

complete the process. (See page 21

for more information.)

›

/Digital Button: This button is

used to select the type of digital input

used with any one of the input sources

connected to the AVR65. After press-

min

OFF

⁄

ing this button, use the

buttons

r Clear Button: This button does

not function with the AVR65, but it is

available for use with other devices.

g to make your selection between

OPTICAL E or COAXIAL G digital.

Press the Set button i to enter

your choice. (See page 27 for more

information.)

Note that this button is also used

to change channels on your TV

when the TV is selected using the

Device Control Selector b.

s Preset Up/Down: When the

tuner is in use, these buttons scroll

through the stations that have been

programmed into the AVR65’s mem-

ory. When many source devices,

such as CD players, VCRs and cas-

sette decks, are selected using the

Device Control Selectors b,

these buttons will normally function

as chapter step or track advance.

When the AVR65 remote is being pro-

grammed for the codes of another

device, this button is also used in the

“Auto Search” process. (See page 33

for more information on programming

the AVR65 remote.)

x Speaker Configuration: Press

this button to begin the process of

configuring the AVR65’s Bass

Management System for use with

the type of speakers used in your

system. Once the button has been

⁄

pressed, use the

buttons g to

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and Connections

System In stallation

3. Connect the output of any digital

sources to be used to the appropriate

connections on the AVR65 rear panel.

Note that the Optical and Coaxial

digital inputs · ° may be used with

a Dolby Digital (AC-3) or DTS source

or the output of a conventional CD or

LV player’s PCM (SP/DIF) output.

Your dealer or installer is a valuable

resource to consult in selecting the

proper cable.

After unpacking the unit, and placing it

on a solid surface capable of supporting

its weight, you will need to make the

connections to your audio and video

equipment. These steps need to be done

only when the receiver is first installed,

or when a change is made to the input

source equipment.

Regardless of the brand of cable selected,

we recommend that you use a cable con-

structed of fine, multistrand copper with a

gauge of 14 or smaller. Remember that in

specifying cable, the lower the number,

the thicker the cable.

4. Assemble the AM Loop Antenna sup-

plied with the unit as shown below.

Connect it to the AM and GND screw

Audio Equipm en t Con n ection s

We recommend that you use high-quality

interconnect cables when making connec- terminals ¡.

tions to source equipment and recorders

to preserve the quality of the signals.

Cable with a gauge of 16 may be used for

short runs of less than ten feet. We do not

recommend that you use cables with an

AWG equivalent of 18 or higher due to

the power loss and degradation in

performance that will occur.

When making connections to audio

source equipment or speakers it is always

a good practice to unplug the unit from

the AC wall outlet. This prevents any pos-

sibility of accidentally sending audio or

transient signals to the speakers that may

damage them.

Cables that are run inside walls should

have the appropriate markings to indicate

listing with UL, CSA or other appropriate

testing agency standards. Questions about

running cables inside walls should be

referred to your installer or a licensed

electrical contractor who is familiar with

the NEC and/or the applicable local

building codes in your area.

5. Connect an FM antenna to the

FM (75 ohm) connection ™. The

FM antenna may be an external roof

antenna, an inside powered or wire lead

antenna or a connection from a cable

TV system. Note that if the antenna or

connection uses 300-ohm twin-lead

cable, you must use the 300-ohm-to-

75-ohm adapter supplied with the unit

to make the connection.

1. Connect the analog output of a CD

player to the CD inputs §.

NOTE: When the CD player has both

fixed and variable audio outputs it is best

to use the fixed output unless you find

that the input to the receiver is so low

that the sound is noisy, or high that the

signal is distorted.

When connecting wires to the speakers,

be certain to observe proper polarity.

Remember to connect the “negative” or

“black” wire to the same terminal on the

receiver and the speaker. Similarly, the

“positive” or “red” wire should be con-

nected to the like terminal on the AVR65

and speaker.

6. Connect the front, center and

surround speaker outputs ‚ ⁄ ¤

to the respective speakers.

2. Connect the Play/Out jacks of a cas-

sette deck, MD or other audio recorder to

the Tape Monitor In jacks e. Connect

the Record/In jacks on the recorder to

the Tape Monitor Out jacks f on

the AVR65.

To assure that all the audio signals are

carried to your speakers without loss of

clarity or resolution, we suggest that you

use high-quality speaker cable. Many

brands of cable are available, and the

choice of cable may be influenced by the

distance between your speakers and this

receiver, the type of speakers you use,

personal preferences and other factors.

We also recommend that the length of

cable used to connect speaker pairs be

identical. For example, use the same

length piece of cable to connect the front

left and front right or surround left and

surround right speakers, even if the

speakers are a different distance from

the AVR65.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and Connections

NOTE: While most speaker manufacturers NOTE: The AVR65 will accept both stan-

own built-in Dolby Digital and DTS

decoding system. If an external decoder

is used, connect the output jacks of the

decoder to the 6-Channel Direct inputs

∞, making sure to match channels.

adhere to an industry convention of using

black terminals for negative and red ones

for positive, some manufacturers may

vary from this configuration. To assure

proper phase, and optimal performance,

consult the identification plate on your

speaker, or the speaker’s manual to verify

polarity. If you do not know the polarity

of your speaker, ask your dealer for

advice before proceeding, or consult

the speaker’s manufacturer.

dard (composite) or S-Video signals.

However, it will not convert signals from

one video format type to the other.

System and Power Connections

These jacks may also be used for connec-

tions to devices such as DVD players or

High Definition Television (HDTV) sets

or decoders that feature built-in digital

surround decoders. Although the digital

decoding system in the AVR65 will typically

provide audio performance that is superior

to other decoders, you may use these jacks

to provide an additional 6-channel input

for connection to a DVD player or HDTV

set with a built-in decoder and discrete

6-channel analog outputs.

The AVR65 is designed for flexible use

with external control components and

power amplifiers. These connections are

easy to make during an initial installa-

tion, or at a later date should you choose

to upgrade your system.

7. Connections to a subwoofer are made

via a line level audio connection from

the Subwoofer Output ª to the line

level input of a subwoofer with a built-in

amplifier. If a passive subwoofer is used,

the connection first goes to a power

amplifier, which will be connected to one

or more subwoofer speakers.

Rem ote Con trol Exten sion

If the receiver is placed behind a solid or

smoked glass cabinet door, the obstruc-

tion may prevent the remote sensor from

receiving commands. In this event, an

optional remote sensor may be used.

Connect the output of the remote sensor

to the Remote Cont. In jack a.

AC Power Con n ection s

This unit is equipped with two accessory

AC outlets. They may be used to power

accessory devices, but they should not be

used with high-current draw equipment

such as power amplifiers. The total power

draw may not exceed 50W to each outlet.

Video Equipm en t Con n ection s

If other components are also prevented

from receiving remote commands, only

one sensor is needed. They may use this

unit’s sensor or a remote eye by running

a connection from the Remote Cont.

Out jack b to the Remote In jack on

Harman Kardon or other compatible

equipment.

Video equipment is connected in a fashion

similar to audio components. Again, the

use of high-quality interconnect cables is

recommended to preserve signal quality.

The Switched › outlet will receive

power only when the unit is on. This is

recommended for devices that have no

power switch, or a mechanical power

switch that may be left in the “ON”

position.

1. Connect a VCR’s audio and video

Play/Out jacks to the Video 1 In jacks

£ on the rear panel. The audio and

Record/In jacks on the VCR should be

connected to the Video 1 Out jacks ¢

on the AVR65.

Extern al Audio Power Am plifier

Con n ection s

If desired, optional external power audio

power amplifiers may be used with the

AVR65. Connections to these amplifiers

NOTE: Devices with electronic power

switches may only go into a Standby

mode when plugged in here.

2. Connect the audio and video outputs

of a satellite receiver, cable TV converter

or television set or any other video source are made by using audio interconnect

to the Video 2 In jacks ﬂ.

cables connected to both the Preamp

Outputs ^•on the rear panel and

the audio input jacks of the external

amplifiers.

The Unswitched ‹ outlet will receive

power as long as the unit is plugged into

a powered AC outlet.

3. Connect the audio and video outputs

of a DVD or laser disc player to the DVD

jacks ¶.

Finally, when all connections are com-

plete, plug the power cord into a non-

switched 120-volt AC wall outlet. You’re

almost ready to enjoy the AVR65!

Extern al Audio Decoder Con n ection

To provide for the ultimate flexibility, the

AVR65 may be used in conjunction with

optional, external decoders for digital

audio systems other than the AVR65’s

4. Connect the TV Monitor Out ‡

jacks on the receiver to the video

input of your television monitor or

video projector.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

System Configuration

When all audio, video and system con-

speaker. If possible, adjust all front

Center Front Speaker

nections have been made, there are a few loudspeakers so that they are aimed at

configuration adjustments to be made. A ear height when you are seated in the

No more

than 24"

few minutes spent to correctly configure

and calibrate the unit will greatly add to

your listening experience.

listening position.

Using these guidelines, you’ll find that it

takes some experimentation to find the

correct location for the front speakers in

your particular installation. Don’t be

afraid to move things around until the

system sounds correct. Optimize your

speakers so that pans across the front of

the room sound smooth, and that sounds

from all speakers appear to arrive at the

listening position at the same time with-

out delay from the center speaker as

opposed to the left and right speakers.

Left Front

Speaker

Right Front

Speaker

Speaker Selection an d Placem en t

The placement of speakers in a multi-

channel-home-theater system can have

a noticeable impact on the quality of

sound reproduced.

A) Front Channel Speaker Installation

with Direct-View TV Sets or Rear-Screen

Projectors

TV or Projection Screen

Center Front

Speaker

Left Front

Speaker

Right Front

Speaker

No matter which type or brand of speakers

is used, the same model or brand of

speaker should be used for the front left,

center and right speakers. This creates a

seamless front soundstage, and elimi-

nates the possibility of distracting sonic

disturbances that occur when a sound

moves across mismatched front channel

speakers.

Surround speakers should be placed on

the side walls of the room, at or slightly

behind the listening position. The center

of the speaker should face into the room.

The speakers should be located so that

the bottom of the cabinet is at least two

feet higher than the listeners’ ears when

seated in the desired area.

Speaker Placem en t

Depending on the type of center channel

speaker in use and your viewing device,

place the center speaker directly above or

below your TV or in the center behind a

perforated front projection screen.

Optional Rear Wall Mounting

If side wall mounting is not practical, the

speakers may be placed on a rear wall,

behind the listening position. Again, they

should be located so that the bottom of

the cabinet is at least two feet higher

than the listeners’ ears. The speakers

should be no more than six feet behind

the rear of the seating area.

B) The distance between the left and right

speakers should be equal to the distance

from the seating position to the viewing

screen. You may also experiment with

placing the left and right speakers slightly

forward of the center speaker.

Once the center channel speaker is

installed, position the left and right

front speakers so that they are as far

away from one another as the center

channel speaker is from the preferred

listening position. Ideally, the front

channel speakers should be placed so

that their tweeters are no more than 24"

off center from the tweeter in the center

channel speaker.

At least 6 inches from ceiling

Subwoofers produce non-directional

sound, so they may be placed almost

anywhere in a room. Subwoofer place-

ment is highly influenced by room size

and shape, and the type of subwoofer

used. Follow the instructions of the sub-

woofer’s manufacturer, or experiment

with the best location for a subwoofer in

your listening room.

At least 2 feet

Depending on the specifics of your room

acoustics and the type of speakers in use,

you may find that imaging is improved

by moving the front left and right speak-

ers slightly forward of the center channel

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

System Configuration

System Setup

4. Turn the AVR65 on either by pressing

the System Power Control 2on

the front panel, or via the remote by

first pressing the AVR Selector a,

and then pressing the Power button

c. The Power Indicator 3 will

turn green to confirm that the unit is

on, and the Information Display ˝

will also light up.

warranty, and may not be covered by the

projector TV set’s warranty. Please consult

the owner’s manual for your video display

for specific information about image

burn-in.

Once the speakers have been placed in the

room and connected, the final step in the

setup process is to enter the settings that

configure the AVR65’s bass management

system for the type of speakers used in

your system, the calibration of the output

levels and the delay times used by the sur-

round sound processor. Before proceeding

further, this is a good time to review the

installation section of the manual to

make certain that all connections are

properly made.

The AVR65 has two on-screen display

modes, “semi-OSD” and “full-OSD”.

When making configuration adjust-

ments, it is recommended that the full-

OSD mode be used. This will place a

complete status report or option listing

on the screen, making it easier to view

the available options.

Usin g th e On -Screen Display

While configuring the AVR65 so that it is

properly matched to the specific speakers

in your system, as well as when setting

You are now ready to power up the AVR65 other system parameters, you may find it

to begin these final adjustments.

helpful to take advantage of the unit’s

on-screen display system. These easy-to-

read displays give you a clear picture of

the current status of the unit, and make

it easy to see which speaker, delay, input

or digital selection you are making.

To view the full-OSD screens, press the

OSD button o three times. The first

press will bring up the semi-OSD mode

and the second press will turn that mode

off. The third press will call up the full-

OSD display (Figure 1).

1. Plug the Power Cable ﬁ to an

unswitched AC outlet.

2. Press the Main Power Switch 1

in so that it latches in with the “OFF”

wording on the top of the switch

inside the front panel. Note that the

Power Indicator 3 will turn

amber, indicating that the unit is in

the Standby mode.

To view the on-screen displays, make cer-

tain you have made a connection from

the TV Monitor Video Out jack ‡ on

the rear panel to the video input of your

TV, projector or display device. In order to

The display will appear any time a

change is made to the settings or fea-

tures, and it will automatically follow the

command pattern of remote or front

panel instruction. It is not necessary to

view the displays, the video source must be use any other navigation buttons to use

selected as described in the instructions for the AVR65’s On-Screen Display system.

the video display.

3. Install the four supplied AAA batteries

in the remote as shown. Be certain to

observe the (+) and (

–

) polarity

Note that the full screen displays will

indicators shown in the bottom of the NOTE: The AVR65’s on-screen displays

time-out after 30 seconds. However, the

on-screen display used with the channel

output level adjustments will remain on

the screen as long as the settings are

being changed. This display must be

manually turned of by pressing the OSD

button o.

battery compartment.

may only be viewed when the standard,

composite video output is in use. The dis-

plays are NOT visible when the S-Video

signal is displayed.

IMPORTANT NOTE: When viewing

the displays on a projection TV it is

AUDIO

VIDEO

AUDIO

TAPE

SOURCE

INPUT

:DVD

important that they not be left on the

screen for an extended period of time. As

with any video display, but particularly

with projectors, constant display of a static

image such as these menus or video game

images may cause the image to be perma-

nently “burned in” to the CRT. This type

of damage is not covered by the AVR65

:DVD

:ANALOG

MONITOR

:OFF

LOGIC

:OFFON

SURR.

MULTI

MASTER

MODE

ROOM

:PRO

VOLUME:Ð19DB

Figure 1

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

System Configuration

Speaker Con figuration

2. Press the Speaker button x˘ on

the remote or front panel. The words

FRNTSPEAKERwill appear in

the Main Information Display U.

When LARGEis selected, a full-

range output will be sent to the

front left and right outputs, and

NO low-frequency signals will be

sent to the subwoofer output.

The first few adjustments tell the AVR65

which type of speakers are in use. This is

important as it adjusts the settings that

determine which speakers receive low-

frequency (bass) information. For each

of these settings use the LARGEsetting

if the speakers for a particular position

are traditional full-range loudspeakers

that are capable of reproducing sounds

below 100Hz. Use the SMALLsetting for

smaller, frequency-limited satellite

speakers that do not reproduce sounds

below 100Hz. Note that when “small”

speakers are used, a subwoofer is

required to reproduce low-frequency

sounds. Remember that the “large” and

“small” descriptions do not refer to the

actual physical size of the speakers, but

their ability to reproduce low-frequency

sounds. If you are in doubt as to which

category describes your speakers, consult

the specifications in the speakers’ owner’s

manual, or ask your dealer.

If you are using the on-screen display

system, a display will appear indicating

the status of each speaker (Figure 2).

NOTE: If you are using the On-

Screen Display system, the selected

speaker option will appear in high-

lighted video. The selection will

change in response to the steps

outlined on these pages.

MODE

:DOLBY

PRO

LOGIC

FRONT

SP :LARGE

SMALL

CENTER

SP:LARGE

NONE

SURR

SPK

:LARGE

NONE

SMALL

SUBWOOFER:OFF

5. When you have completed your

selection for the front channel, press

the Set button i˜, and then

MASTER

VOLUME:Ð19DB

⁄

press the

buttons g on the

Figure 2

remote or the Selector buttons¸

on the front panel to change the

display to CENSPEAKER.

3. Press the Set button i˜.

⁄

4. Press the

buttons g on the

6. Press the Set button i˜ again,

remote or the Selector buttons¸

on the front panel until either

LARGEor SMALLappears to

match the type of speakers you have

at the left front and right front posi-

tions, as described by the definitions

shown below.

⁄

and use the

buttons g on

the remote, or the Selector buttons

¸ on the front panel, to select the

option that best describes your system

based on the speaker definitions

shown above.

With the AVR65 turned on, follow these

steps to configure the speakers:

1. Put the AVR65 in the Dolby Pro Logic

mode by pressing the Dolby Pro

Logic Selector Ó on the front

panel or by pressing the Surround

Mode Selector yon the remote,

When CENSPSMALLis

selected, low-frequency center

When SMALLis selected, low-

frequency sounds will be sent to the

subwoofer output only. Note that if

you choose this option, and there is

no subwoofer connected, you will

not hear any low-frequency sounds

from the front channels.

channel sounds will be sent to the

subwoofer output only. Note that if

you choose this option and there is

no subwoofer connected, you will

not hear any low-frequency sounds

from the center channel speaker.

⁄

followed by the

buttons g

until PROLOGICappears in the

Main Information Display U and

the PRO LOGIC indicator F lights.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

System Configuration

When CENSPLARGEis

When SURSPLARGEis selected,

a full-range output will be sent to the

surround channel outputs, and NO

surround channel signals will be sent

to the subwoofer output.

11. When all speaker selections have

been made, press the Set button i

˜ to return to normal operation.

selected, a full-range output will be

sent to the center speaker output,

and NO center channel signal will

be sent to the subwoofer output.

Output Level Adjustm en t

Output level adjustment is a key part of

When SURSPNONEis selected, the configuration process for any sur-

surround sound information will be round sound product. It is particularly

When CENSPNONEis selected,

no signals will be sent to the center

channel output. The receiver will

operate in a “phantom” center

channel mode and center channel

information will be sent to the left

and right front channel outputs.

split between the front left and front

right outputs. Note that for optimal

performance when no surround

speakers are in use, the Dolby 3

Stereo mode should be used instead

of Dolby Pro Logic.

important for a Dolby Digital receiver

such as the AVR65, as correct outputs will

ensure that you hear sound tracks in their

proper place with the proper intensity.

IMPORTANT NOTE: Many listeners

are often confused about the operation

of the surround channels. While some

assume that sound should always be

coming from each speaker, most of the

time there will be little or no sound in

the surround channels. This is because

they are only used when a movie director

or sound mixer specifically places sound

there to create ambiance, an effect or to

continue action from the front of the

room to the rear. When the output levels

are properly set it is normal for rear/

surround speakers to operate only

7. When you have completed your

selection for the center channel, press

the Set button i˜, and then

9. When you have completed your

selection for the surround channel,

press the Set button i˜, and

⁄

press the

buttons g on the

⁄

remote or the Selector buttons¸

on the front panel to change the

display to SURSPEAKER.

then press the

buttons g on

the remote or the Selector buttons

¸ on the front panel to change the

display to SÐWSPEAKER.

8. Press the Set button i˜ again,

⁄

and then use the

buttons g

10. Press the Set button i˜, and

⁄

on the remote or the Selector

buttons¸ on the front panel to

select the option that best describes

your system based on the speaker

definitions shown above.

then press the

buttons g on

the remote or the Selector buttons

¸ on the front panel to select the

option that best describes your system. occasionally. Artificially increasing the

volume to the rear speakers may destroy

Select S-WSPONif a subwoofer

is connected to your system.

the illusion of an enveloping sound field

that duplicates the way you hear sound

in a movie theater or concert hall.

When SURSPSMALLis

selected, low-frequency surround

channel sounds will be sent to the

subwoofer output only. Note that if

you choose this option and there is

no subwoofer connected, you will

not hear any low-frequency sounds

from the surround speaker.

Select S-WSPOFFif a sub-

woofer is NOT connected to your

system. Note that when no sub-

woofer is selected, low-frequency

sounds below 100Hz will be sent

to the front left/right speakers,

provided that the selection in step 4,

above, has been set to LARGE.

Otherwise, no low-frequency sounds

will be heard. This option is not

available when the front, center or

surround speakers are set to SMALL.

Before beginning the adjustment process

make certain that all speaker connections

have been properly made. The system

volume should be set to the level that

you will use during a typical listening

session. Finally, make certain that the

Balance Control 7 is set to the center

“12 o’clock” position.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

System Configuration

To adjust and calibrate the output levels,

follow these steps. For accurate calibration,

it is a good idea to make these adjustments

from the location in your room that is

your favorite listening position:

each channel to begin to bring them

to the same level. Note that when one

of the buttons is pushed, the test noise

circulation will pause on the channel

being adjusted to give you time to

make the adjustment. When you

release the button, the circulation

will resume.

MODE

:DOLBY

PRO

LOGIC

1. Put the AVR65 in the Dolby Pro Logic

mode by pressing the Dolby Pro

Logic Selector Ó on the front

panel or by pressing the Surround

Mode Selector yon the remote,

MASTER

VOLUME:Ð19

Figure 3

5. Continue to adjust the individual

speakers until they all have the same

volume. Note that adjustments

3. At this point, the test noise will begin

to circulate among all the speakers in

a clockwise rotation.

⁄

followed by the

buttons g

⁄

until PROLOGICappears in the

Main Information Display U and

the PRO LOGIC indicator F lights.

should be made with the

buttons g on the remote or the

Selector buttons¸ on the front

panel only, NOT the main volume

controls. Then press the Set button

i ˜ to memorize the change. If

you are using a sound pressure (SPL)

meter for precise level adjustment, set

the volume so that the meter reads

75dB, C-Weighting Slow.

NOTE: This is a good time to verify

that the speakers have been properly

connected. As the test noise circulates,

listen to make certain that the sound

comes from the speaker position

shown in the Main Information

Display. If the sound from a speaker

location does NOT match the position

indicated in the display, turn the

AVR65 off and check the speaker

wiring to make certain that each

speaker is connected to the correct

output terminal.

2. Press the Test Tone button

e on the remote. The words

T -TFL 0dBwill appear in

the Main Information Display

U , and the letters FLwill flash

once each second.

NOTE: If you are using the On-Screen

Display system while making output

level adjustments, a specific display

will appear on your video screen

(Figure 3). While making output

NOTE: The subwoofer output level is

not adjustable using the test tone. To

change the subwoofer level, follow the

steps for Output Level Trim Adjustment

on page 30.

4. After checking for speaker placement,

let the test noise circulate again, and

listen to see which channels sound

louder than the others. Using the

front left (FLin the display) speaker

as a reference, press the

g on the remote or the Selector

buttons¸ on the front panel on

⁄

adjustments, a cursor will appear

under the channel being adjusted,

and it will move to indicate any

channel position changes. As adjust-

ments are made to the output level,

the offset amount will appear under

the channel indication.

6. When you have adjusted the outputs

so that all channels have the same

level, press the Test Tone button

e on the remote to complete

the adjustment.

⁄

buttons

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

System Configuration

Delay Settin gs

b. When setting the delay time for

the Pro Logic mode, take the result

of the subtraction and add 15 to

obtain the optimal delay time. For

example, if the front speakers are

ten feet away and the surround

speakers are five feet away, the

optimal delay time is figured

as 10–5+15=20. Thus, in this

example, the delay should be set

at twenty milliseconds.

If repositioning of the speakers is not

possible, adjust the center delay time so

that you add one millisecond of center

channel delay for each foot that the

distance to the center speaker lags

behind the front speakers. For example,

if the front left/right speakers are each

10 feet from the listening position and

the center-channel speaker is 8 feet

away, the delay is figured as 10–8=2,

suggesting an optimal center delay of

2 milliseconds.

One aspect of the surround modes is the

delay of audio signals between the front

speakers and the rear speakers. Each

surround mode is factory preset with a

specific delay time, but it is possible to

individually adjust the delay timing to

custom tailor the sound to your individ-

ual taste and the acoustic conditions in

your listening room or home theater.

The factory setting is appropriate for

most rooms, but some installations

create an uncommon distance between

the front and surround speakers that may

cause the arrival of front-channel sounds

to become disconnected from surround-

channel sounds.

The Dolby Digital and DTS modes also

provides a separate setting for the center-

channel delay mode, since the discrete

nature of Dolby Digital signals makes the

location of the center-channel speaker

more critical. To calculate the delay for

the center channel, measure the distance

from the preferred listening position in

the center of the room to both the center-

channel speaker and either the left or

right speaker.

To set the delay times, follow these steps:

1. Put the AVR65 in the Dolby Pro Logic

mode by pressing the Dolby Pro

Logic Selector Ó on the front

panel, or by pressing the Surround

Mode Selector yon the remote,

To resynchronize the front and surround

channels, follow these steps:

⁄

followed by the

buttons g

until PROLOGICappears in the

Main Information Display U and

the PRO LOGIC indicator F lights.

1. Measure the distance from the

listening/viewing position to the

front speakers.

NOTE: The Theater, Hall 1 and Hall 2

modes use a fixed, non-adjustable

delay time.

2. Press the Delay button vı on

the remote or front panel. The words

S DELAYTIMEwill appear in

the Main Information Display U

and at the bottom of a video screen

when the on-screen display is in use

(Figure 4).

2. Measure the distance from the

listening/viewing position to the

surround speakers.

If the distances are equal no further

adjustment is required and the center

delay should be set to zero. If the distance

to the front speakers is greater than the

distance to the center speaker you may

wish to reposition the speakers by moving

the front left/right speakers closer to the

listening position or the center speaker

further away from the listening position.

3. Subtract the distance to the surround

speakers from the distance to the

front speakers.

a. When setting the delay time for the

Dolby Digital and DTS surround

modes, the optimal delay time is

the resulting figure. For example,

if the front speakers are ten feet

away and the surround speakers

are five feet away, the optimal

DELAY

TIME

delay time is figured as 10–5=5.

Thus, in this example, the delay

should be set at five milliseconds.

Figure 4

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

System Configuration

3. Press the Set button i˜.

7. Press the Set button i˜.

11. Press the Set button i˜.

⁄

4. Adjust the delay time by pressing the

8. Select the Dolby Digital mode either

by pressing the front panel Dolby

Digital Selector( or by pressing

the Surround Mode Selector y

on the remote, and then pressing the

12. Press the

buttons g on

⁄

buttons g on the remote or

the remote until the desired delay

time for the center channel appears

in the display.

the Selector buttons¸ on the front

panel until the delay time figure cal-

culated using the formula entered

above appears in the display.

⁄

buttons g on the remote

13. Press the Set button i˜ to enter

until DOLBYAC-3appears in

the Main Information Display U

or in the on-screen display. Ignore

any “NODATA” message that

may appear.

the setting into the AVR65’s memory.

5. If no adjustment is needed for

the center channel delay, press the

Set button i˜ to enter the

setting into the AVR65’s memory.

If the calculations outlined above

for the center channel delay require

an adjustment, proceed with the

following steps:

Congratulations! You have now completed

the setup, adjustment and calibration of

the AVR65. You are now ready to enjoy the

finest in music and home theater listening.

9. Press the Delay button vı on

the remote or front panel. The words

S DELAYTIMEappears in the

Main Information Display U .

6. Select a digital input by pressing

⁄

the Digital button wˆ. Press

10. Press the

buttons g on the

⁄

the

buttons g on the remote

remote once, so that C DELAY

TIMEappears in the Main

Information Display U or

in the on-screen display.

or the Selector buttons¸ on the

front panel until either COAXor

OPTICALappear in the Main

Information Display U or in

the on-screen display. Note that for

this adjustment, either input may

be selected.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

When the remote is used to turn the unit

“off” it is actually placing the system in a

standby mode, as indicated by the amber

color of the Power Indicator 3.

the semi-OSD mode, press the OSD

Basic Operation

button

once. A confirmation mes-

Once you have completed the setup and

configuration of your new receiver, it is

simple to operate and enjoy. The follow-

ing instructions will provide the steps

needed to enjoy the AVR65:

sage (Figure 5) will appear briefly at the

bottom of your video display to remind

you that this feature is turned on. The

message will time-out and disappear

after a few seconds.

When you will be away from home for

an extended period of time it is always

a good idea to completely turn the

unit off using the front panel Main

• When using the AVR65 for the first

time, it is necessary to press the Main

Power Switch . Note that all preset

Power button on the front panel to

memories are lost if the unit is left

turn the unit on. This places the unit in a

standby mode, as indicated by the amber

color of the Power Indicator . Once

turned off with the Main Power

Switch for more than two weeks.

Using the On-Screen Display

the unit is in standby, you may begin a

SEMI

OSD

listening session by pressing the System

Figure 5

The AVR65 is equipped with a powerful

on-screen display system that makes it

easy to view the current status of the unit,

or to have messages appear to confirm

any functional change, such as a volume

increase, input source selection, or sur-

round mode selection. Two modes of

on-screen display are available, a “semi-

OSD” mode that only displays a message

when some aspect of the operation is

changed, and a “full-OSD” mode that

displays a complete status report on the

unit’s current condition.

Power Control on the front panel or

the Power button

on the remote.

When semi-OSD is activated, brief

Note that the Power Indicator will

turn green. This will turn the unit on and

return it to the input source that was last

used. The unit may also be turned on

from standby by pressing any of the

messages will confirm changes to the

volume, input source, surround mode or

when the tuner’s frequency is changed.

These messages will appear at the bottom

of the display screen, and then disappear.

Source Selector buttons on the remote

9 ) ! @ # $

or front panel

To turn off the Semi-OSD mode after

it has been activated, simply press

To turn the unit off at the end of a listen-

ing session simply press the System

Power Control 2 on the front panel

the OSD button

once. When the

SEMIOSDOFFmessage appears,

the on-screen displays are de-activated.

or the Power button

on the remote.

Sem i-OSD

Power to any equipment plugged into

the rear panel Switched AC Outlet

› will be shut off and the Power

Indicator 3 will turn amber.

In the semi-OSD mode a one-line

message will appear at the bottom of

the screen when changes are made to

the unit’s operational status. to activate

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

Full-OSD

Activating the full-OSD will also simplify

adjustments to any system parameter, as

all choices will be shown. The selected

• To temporarily silence all speaker

outputs press the Mute button

This will cut the output to all speakers,

d Û

A second display option is to have a full

screen report of the AVR65’s status

appear. To activate the full OSD, press the option will appear in reversed, highlighted but it will not effect any recording or

OSD button

three times in quick

video, while other choices will appear in

normal white on blue video.

dubbing that may be in progress. When

the system is muted the MUTE indicator

A will light in the Information

succession. The first press will turn the

semi-OSD on, the second will turn the

semi-OSD off, and the third will bring a

full status report to the screen.

The full-OSD system may be turned off

Display . Press the Mute button

by pressing the OSD button

once.

again to return to normal operation.

Source Selection

Note that the status report will vary

depending on the type of audio input

source in use. When an analog source is

in use, the first line in the display will show

which audio input is active (Figure 6).

When a digital audio source is in use,

the display will indicate if the coaxial or

optical input is active (Figure 7).

• For private listening, plug the /4"

stereo phone plug from a pair of stereo

headphones into the front panel

• To select a source at any time, press

any of the Source Selector buttons on

Headphone jack

9 ) !

the remote or front panel

@ # $

• When a Video Input source is selected

the video signal for that input will be

routed to the TV Monitor Video Output

jack ‡ and will be viewable on a TV mon-

itor connected to the AVR65. Make certain

that your TV is set to the proper input to

view the signal.

• The front panel Video 3 Inputs

may be used to connect a device such as

a video game or camcorder to your home

entertainment system on a temporary

basis.

AUDIO

VIDEO

AUDIO

TAPE

SOURCE

INPUT

:DVD

:ANALOG

MONITOR

:OFF

LOGIC

:OFFON

SURR.

MULTI

MASTER

MODE

ROOM

:PRO

• When an audio source is selected the

last video input used remains routed to

the Video Outputs 1 ¢ and TV

Monitor Output ‡. This permits

simultaneous viewing and listening to

different sources.

• To program the AVR65 for automatic

turn off, press the Sleep button

VOLUME:Ð19DB

the remote. Each press of the button will

increase the time before shut down in the

following sequence:

Figure 6

min

AUDIO

VIDEO

AUDIO

TAPE

SOURCE

INPUT

:DIGITAL

:DVD

:OPTICAL

min

• During a listening session you may

wish to adjust the Bass and Treble

OFF

MONITOR

:OFF

SURR.

MULTI

MASTER

MODE

ROOM

:DOLBY

DIGITAL

:OFF ON

controls to suit your listening tastes.

The sleep time will be displayed in the

Information Display and it will count

down until the time has elapsed.

VOLUME:Ð19DB

• Adjust the volume to a comfortable

level using the front panel Volume

Control Ù or remote Volume

When the programmed time has elapsed

the unit will automatically turn off. Note

that the front panel display will dim to

one half brightness when the Sleep func-

tion is programmed. To cancel the Sleep

Figure 7

Up/Down

buttons.

function, press the Sleep button

until the information display returns to

normal brightness and the Sleep

indicator numbers disappear.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

surround information when they are

broadcast via conventional TV stations,

cable, pay TV and satellite transmission.

In addition, a growing number of made-

for-television programs, sports broad-

casts, radio dramas and music CDs are

also recorded in surround sound. You

may obtain a list of these programs and

discs from the Dolby Laboratories web

site at www.dolby.com

remote, press the Surround Mode

Surround Mode Selection

⁄

Selector y, and then press the

buttons g to change the mode. As

you press the buttons, the surround

mode name will appear in the Main

Information Display U, and an

individulal mode indicator will also

light up D /F /J.

One of the most important features of

the AVR65 is its ability to reproduce a full

multichannel surround sound field from

Dolby Digital sources, analog matrix

surround encoded programs and stan-

dard stereo programs. In all a total of

seven listening modes are available on

the AVR65.

Note that the Dolby Digital or DTS modes

may only be selected when a Dolby Digital

source is playing. For more information on

digital sources, see the following section of

Selection of a surround mode is based on

personal taste, as well as the type of pro-

gram source material being used. For

example, motion pictures or TV programs

bearing the logo of one of the major sur-

round encoding processes, such as Dolby

When a program is not listed as carrying

intentional surround information, you

may find that Pro Logic or Dolby 3-Stereo this manual.

modes often deliver enveloping surround

presentations through the use of the

natural information present in all stereo

recordings. However, for stereo, but non-

surround programs, we suggest that you

try the Hall 1, Hall 2 or Theater modes.

To listen to a program in traditional two-

channel stereo, using the front left and

front right speakers only (plus the sub-

woofer if installed and configured), press

the Surround Off buttonÚ on the

front panel, or follow the instructions

††

Surround, DTS Stereo or UltraStereo

may be played in either the Dolby Digital,

Dolby Pro Logic or Movie Surround

depending on the source material.

Surround modes are selected using either shown above for using the remote until

the front panel controls or the remote. To SURROFFappears in the Main

select a surround mode from the front

panel, simply press the button that corre-

NOTE: Once a program has been

encoded with surround information, it

retains the surround matrix as long as

the program is broadcast in stereo. Thus,

movies with surround sound will carry

Information Display U. When the

AVR65’s surround circuits are turned off,

and it is in the Stereo mode, the BYPASS

indicator B will illuminate in the

( Ó Ô

sponds to the desired mode



. To select a surround mode using the

Information Display

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

Surround Mode Chart

MODE

FEATURES

DELAY TIME RANGE

DOLBY DIGITAL

This mode is available only when the source material is encoded with Dolby Digital

(AC-3) data. It provides up to five separate main audio channels and a special

dedicated Low-Frequency Effects channel.

Center: 0 ms – 5 ms

Surround: 0 ms –15 ms

DTS

This mode is available only when the source material is encoded with DTS data.

Available on special DVD, LD and audio-only discs, DTS provides up to five separate

main audio channels and a special dedicated low-frequency channel.

Center: 0 ms – 5 ms

Surround: 0 ms –15 ms

DOLBY PRO LOGIC

Dolby Pro Logic is the standard mode for analog surround sound decoding. It uses

information encoded in a two-channel stereo recording to produce four distinct

channels: Left, Center, Right and Surround. Use this mode for accurate reproduction

of programs bearing the Dolby Surround, DTS Stereo, UltraStereo or other

“Surround” logos. Surround encoded programs include videocassette, DVD and LD

movies, TV and cable programs, radio programs and audio CDs. Dolby Pro Logic

processing may also be used to provide a pleasing surround effect with some

stereophonic source material that does not carry surround encoding.

15 ms – 30 ms

Initial Setting = 20 ms

DOLBY 3 STEREO

Dolby 3 Stereo uses the information contained in a surround encoded or two-channel

stereo program to create center channel information. In addition, the information

that is normally sent to the rear channel surround speakers is carefully mixed in with

the front left and right channels for increased realism. Use this mode when you have a

center channel speaker, but no surround speakers.

No Surround Channels

27.3 ms

THEATER

Theater Surround processing uses matrix surround decoding to simulate a standard

movie or stage theater.

HALL 1 and HALL 2

These modes are designed for use with stereo recordings. They provide a sound-field

effect that simulates the complex combination of direct and reflected sounds that

create the rich reverberant atmosphere of a medium-sized concert hall (Hall 1) or a

larger concert hall (Hall 2).

Hall 1 – 41.6 ms

Hall 2 – 67.4 ms

STEREO

This mode turns off all surround processing and presents the pure left and right

channel presentation of two channel stereo programs.

No Surround Channels

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

This does not indicate a problem with the detect if it is a multichannel Dolby Digital

Digital Audio Playback

AVR65, as some players cannot pass the

DTS signal through to the digital out-

puts. If you are in doubt as to the ability

of your DVD player to handle DTS discs,

consult the player’s owner’s manual.

or DTS source or a conventional PCM

signal, which is the standard output from

CD players. An indicator will light in the

Information Display to confirm the digi-

tal signal is AC-3 H or PCM I and if

the source is OPTICAL E or COAX G.

Dolby Digital

Dolby Digital (also known as AC-3) is a

digital audio system that delivers up to

five full-range surround channels (left,

center, right, left surround and right

surround) plus a special dedicated Low-

Frequency Effects (LFE) channel. This

represents a major advancement over

traditional analog surround in that each

surround channel is fully discrete and

capable of full bandwidth reproduction.

Dolby Digital is available on DVD and

LV discs, and is a part of the new high-

definition television (HDTV) system and

digital TV.

To utilize the digital modes you must

have a digital source properly connected

to the AVR65. Connect the Digital datas-

tream outputs from DVD players, HDTV

receivers and CD players to the Coaxial

or Optical inputs on the rear panel °

·. Note that an optional, external RF

demodulator is required to use the AVR65

to listen to the Dolby Digital soundtracks

available on laser discs. Connect the RF

output of the LD player to the demodula-

When a digital source is playing, the

AVR65 will automatically switch to the

proper surround mode. It is important to

note, however, that not all Dolby Digital

or DTS sources are encoded with the full

complement of five channels plus LFE.

When a digital source is playing, the

Main Information Display U or

on-screen display will change to show the

input source and digital type (OPTICAL

DTS

tor, and then connect the digital output of or COAX). When a source with digital

DTS is another digital audio system that

is also capable of delivering up to five

full-range audio channels (left front,

center, right front, right surround and

left surround) along with a special low-

frequency channel. Although both DTS

and Dolby Digital are digital, they use

different methods of encoding the signals

on a disc, and thus it requires different

decoding circuits than Dolby Digital to

convert the signals back to analog.

the demodulator to the the Coaxial or

Optical inputs ° · of the AVR65. No

demodulator is required for use with DTS

encoded laser discs. In order to provide a

backup signal and a source for recording, of channels being decoded as follows:

the analog outputs provided on digital

source equipment should also be con-

nected to their appropriate inputs on the

AVR65 rear panel (e.g., connect the

analog stereo audio output from a DVD to

the DVD inputs ¶ on the rear panel

when you connect the digital outputs.)

encoding is playing, the input source

name will appear in the Information

Display or on-screen display, followed by

a numeric key to the type and number

3/2.1:This message appears

when a full complement of Dolby

Digital signals is present: 3 front

channels (left, center and right),

2 surround channels (surround

left and surround right) and “1”

channel, which is the dedicated Low

Frequency Effects (LFE) channel.

DTS encoded soundtracks are available

on select DVD and LD discs, as well as on

special audio-only DTS discs. You may

use any LD or CD player equipped with a

digital output to play DTS encoded discs

with the AVR65. All that is required is to

connect the player’s output to either the

Coaxial or Optical input on the rear

panel ° ·.

When playing back a digital source, first

select the input using the remote or front

panel controls as outlined above. Next

select the digital source by pressing the

appropriate Digital Input button w

3/1:This message indicates the

system is decoding a standard Dolby

Pro Logic signal with left, center and

right front channels and a signal

mono surround channel.

⁄

ˆ and then using the

buttons g

on the remote or the Selector buttons

¸ on the front panel to choose either

COAXIALor OPTICAL, as it

appears in the Main Information

Display U or on-screen display. Press

the Set button i ˜ to enter the

desired choice. When the digital source

is playing, the AVR65 will automatically

2/0:This message indicates that

the system is decoding a traditional

two-channel stereo signal and that

no center, surround or LFE signals

are present.

In order to listen to DVDs encoded with

DTS sound track, the DVD player must be

compatible with the DTS signal, as indi-

cated by a DTS log on the player’s front

panel. Note that early DVD players may

not be able to play DTS encoded DVDs.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

1+1:This is a monaural signal

that plays the same information in

both the left front and right front

speakers. There is no sound sent to

the center or surround speakers.

5. It is not possible to record the output

of a digital program.

PCM Audio Playback

PCM (Pulse Code Modulation) is the

non-compressed digital audio system

used for compact discs and non-AC-3 or

DTS laser discs. The digital circuits in the

AVR65 are capable of high-quality digital-

to-analog decoding, and they may be

connected directly to the digital audio

output of your CD or LV player.

1/0:This is a monaural signal

that plays through the center channel

speaker only. There is no sound at the

front left/right or surround speakers.

DVD

DATA

Figure 8

2. The AVR65 will decode digital audio

sources with a sampling frequency of

32kHz, 44.1kHz and 48kHz. Although

this will enable it to decode virtually all

DVD movies and HDTV sources, it is pos-

sible that some future digital sources

may not be compatible with the AVR65.

Nigh t Mode

A special feature of Dolby Digital is the

Night mode, which enables AC-3 input

sources to be played back with their full

range while reducing the minimum peak

Connections should be made to the

Optical or Coaxial inputs ° · on the

rear panel, using whichever input is not

occupied by a digital source such as a

DVD player.

level by /4 to /3. This prevents abruptly

loud transitions from causing distur-

bances without reducing the impact of

the digital source. The Night mode is

available only when AC-3 signals with

special data are being played.

NOTE: In order to play the Dolby Digital

signals that are recorded on laser discs,

you must have both a laser disc player

with an RF output, and an optional,

outboard RF-to-data demodulator. To

listen to Dolby Digital LV discs, connect

the AC-3/RF output of the player to the

demodulator, and connect the output

of the demodulator to the Coaxial or

Optical inputs ° · on the rear panel

of the AVR65. DO NOT connect the

AC-3/RF output of a laser disc player

directly to the AVR65.

To listen to a PCM digital source, first

select the input for the desired source

(e.g., CD). Next press the Digital button

⁄

w ˆ and then using the

buttons

To engage the Night mode, press the

Night buttonj on the remote and

note that the NIGHT indicator L will

illuminate in the Information Display.

g on the remote or the Selector

buttons¸ on the front panel until the

desired choice of either COAXIALor

OPTICAL, as it appears in the Main

Information Display U. Press the Set

button i ˜ to enter the desired choice.

IMPORTANT NOTES ON

DIGITAL PLAYBACK:

When a PCM source is playing, the PCM

indicator I will light, and the Main

Information Display will show the input

source and the digital type. During PCM

playback you may select any surround

mode except Dolby Digital.

1. When the digital playback unit is in a

pause, fast forward or chapter search

mode the digital audio data may

3. Note that not all digitally encoded

programs contain full 5.1 channel

audio. Consult the program guide that

accompanies the DVD or laser disc to

determine which type of audio has been

recorded on the disc. The AVR65 will

automatically sense the type of digital

surround encoding used and adjust to

accommodate it.

momentarily stop, causing a NO

DATAmessage to be displayed in the

Main Information Display U or on-

screen display (Figure 8). This is normal

and does not indicate a problem with

either the AVR65 or the source machine.

The AVR65 will return to digital playback

as soon as the data is available when the

machine is in a standard play mode.

Tuner Operation

The AVR65’s tuner is capable of tuning

AM, FM and FM Stereo broadcast stations.

Stations may be tuned manually, or they

may be stored as favorite station presets

and recalled from a 30-position memory.

4. When a digital source is playing,

you may not select any of the analog

surround modes.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

Station Selection

1. Press the AM/FM button

select the tuner as an input.

NOTE: When the FM reception of a

station is weak, audio quality will be

increased by switching to Mono mode

• To automatically scan through the sta-

tions entered in the preset memory, press

the Preset Scan button on the front

panel. The tuner will run through the list

of preset stations, stopping for five seconds

at each one. Press the button again to stop

the scan at your desired station.

$ k

by pressing the Tune Mode button

2. Press the AM/FM button

to switch between AM and FM so that the

desired frequency band is selected.

again

until the STEREO indicator R

goes out.

Preset Tun in g

Tape Recording

* q

3. Press the Tune Mode button

Up to 30 stations may be stored in the

AVR65’s memory for easy recall using the

front panel controls or the remote.

to select manual or automatic tuning.

In normal operation, the audio or video

source selected for listening through the

AVR65 is sent to the record outputs.

This means that any program you are

watching or listening to may be recorded

simply by placing machines connected

to the outputs for Tape Monitor f or

Video 1 ¢ in the record mode.

When the AUTO indicator Q is illumin-

ated in the Main Information Display the To enter a station to the memory, first

tuner will only stop at those stations that

have a strong enough signal to be

received with acceptable quality.

tune the station using the steps outlined

above. Then:

1. Press the Memory button

the remote. Note that MEMORY indicator

P will illuminate and flash in the

Information Display.

When the MONO indicator S is illumin-

ated, the tuner is in a manual mode and

will stop at each frequency increment in

the selected band.

When a tape recorder with separate record

and playback heads is used, you may

monitor the output of the recording by

2. Within five seconds, press the

Numeric Keys

the location where you wish to store this

station’s frequency.

corresponding to

•

9 k

selecting the T Mon Selector

4. To select stations press the Tuning

Note that a red LED will illuminate in the

front panel above the T Mon Selector

to remind you that you are listening to the

record playback instead of the actual input

source being recorded.

% t

button

. When the AUTO indicator

•

Q is illuminated each press will cause

the tuner to search for the next highest

or lowest frequency station that has an

acceptable signal. When tuning FM sta-

tions in the Auto mode, the tuner will

only select Stereo stations. To tune to the

next station, press the button again. If

the MONO indicator S is illuminated,

% t

3. Repeat the process after tuning any

additional stations to be preset.

Recallin g Preset Station s

• To manually select a station previously

entered in the preset memory, press the

NOTE: It is not possible to record the

output of digital sources.

Numeric Keys

that correspond to

IMPORTANT NOTE: Please make cer-

tain that you are aware of the copyright

restrictions on any material you copy.

Unauthorized duplication of copyrighted

materials is prohibited by Federal law.

tap the Tuning button

the desired station’s memory location.

advance one frequency increment at a

time, or press and hold it to locate a spe-

cific station. When the TUNED indicator

T illuminates, the station is properly

tuned and should be heard with clarity.

• To manually tune through the list of

stored preset stations one by one, press

& s

the Preset buttons

on the front

panel or remote.

5. Stations may also be tuned directly

by pressing the Direct button , and

then pressing the Numeric Keys

that correspond to the station’s frequency.

The desired station will automatically

be tuned.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

Press the Set button when the name

tion if the unit is accidentally unplugged

or subject to a power outage. This mem-

ory will last for approximately two weeks,

after which time all information must

be reentered.

Output Level Trim Adjustment

of the desired channel appears in the

Main Information Display U, and

follow the instructions shown above to

adjust the level.

Normal output level adjustment for the

AVR65 is established using the Test Tone,

as outlined on page 20. In some cases,

however, it may be desirable to adjust the

output levels using program material

such as a test disc, or a selection you are

familiar with. Additionally, the output

level for the subwoofer may only be

adjusted using this procedure.

Processor Reset

Repeat the procedure as needed until all

channels requiring adjustment have

been set. When all adjustments have

been made, the AVR65 will return to nor-

mal operation when no adjustments are

made for five seconds.

In the rare case where the unit’s opera-

tion or the displays seem abnormal, the

cause may involve the erratic operation of

the system’s memory or microprocessor.

To adjust the output levels using pro-

gram material, first set the reference

volume for the front left/right channels

Ù z

To correct this problem, first unplug the

unit from the AC wall outlet and wait at

least three minutes. After the pause,

reconnect the AC power cord and check

the unit’s operation. If the system still

malfunctions, a system reset may clear

the problem.

NOTE: The output levels may be separately

trimmed for each digital and analog sur-

round mode. If you wish to have different

trim levels for a specific mode, select that

using the Volume Control

. If

you wish to vary the difference between

the left and right channels, use the

Balance Control 7.

( Ó

mode using the front panel buttons

Ô  Ò

or on the remote control

and follow the instructions in the steps

shown above.

Once the reference level has been set,

To clear the AVR65’s entire system

memory, including tuner presets, output

level settings, delay times and speaker

configuration data, first turn the unit off

by pressing and releasing the Master

Power Switch 1 so that it pops out

from its normal recessed position. Next,

press and hold the AM/FM $ and the

Dolby Pro Logic Ó buttons while

pushing the Master Power Switch

1 in to turn the unit back on. Note

that once you have cleared the memory

in this manner, it is necessary to re-

establish all system configuration

settings and tuner presets.

press the Channel Select button

6-Channel Direct Input

and note that FRONTL LEV

will appear in the Main Information

Display U. To change the level, first

The AVR65 is equipped for future

expansion through the use of optional,

external adapters for formats that the

AVR65 may not be capable of processing.

When an adapter is connected to the

6-Channel Direct Inputs ∞, you

may select it by pressing the 6-Ch Input

k #

press the Set button , and then use

⁄

the Selector buttons or the

buttons to raise or lower the level.

DO NOT use the volume control, as this

will alter the reference setting.

Selector

Once the change has been made, press

the Set button and then press the

Note that when the 6-Channel Direct

input is in use, you may not select a sur-

round mode, as the external decoder

determines processing. In addition, there

is no signal at the record outputs when

the 6-Channel Direct input is in use.

⁄

Selector buttons or the

buttons to select the next output

channel location that you wish to adjust.

To adjust the subwoofer level, press the

If the system is still operating incorrectly,

there may have been an electronic

discharge or severe AC line interference

that has corrupted the memory or

microprocessor.

⁄

Selector buttons or the

buttons

until S-WOOFER LEV

appears in the Main Information

Display U.

Memory Backup

This product is equipped with a memory

backup system that preserves tuner pre-

sets and system configuration informa-

If these steps do not solve the problem,

consult an authorized Harman Kardon

service depot.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Multiroom Operation

The AVR65 is fully equipped to operate as

the control center for a sophisticated

multiroom operation with optional

remote IR sensors, speakers and power

amplifiers. Although some multiroom

installations will require the services of a

specially trained installer, it is possible

for the average do-it-yourself hobbyist to

install a simple remote room system. For

additional information on using the

AVR65 in multiroom installations we

suggest that you contact your dealer or

custom installer.

NOTE: All remotely controlled compo-

nents must be linked together in a daisy

chain. Connect the IR OUT jack of one

unit to the IR IN of the next to establish

this chain.

IMPORTANT NOTE: Any cables run

inside walls should be CL3/FT4 rated,

or carry any other certification that is

required by the NEC, NFPA or state and

local building and electrical codes. To

avoid interference, audio and speaker

cables should not be parallel to, or in

the same conduits with AC cables. If you

have any questions about multiroom

wiring consult your dealer, custom

installer or a licensed contractor or

electrician.

Audio Lin k

Depending on the distance from the

AVR65 to the remote room, two options

are available.

One option is to run high-quality,

shielded audio interconnect cable from

the AVR65’s location to the remote room.

At the remote room, connect the inter-

Multiroom Setup

Once the audio and IR link connections

In stallation

The key to remote room operation is

to link the remote room to the AVR65’s

location with wire for an infrared

receiver and speakers or an amplifier.

connect cable to a stereo power amplifier. have been made, the AVR65 needs to be

The amplifier will be connected to the

room’s speakers. No volume control is

configured for multiroom operation

using the following steps. When making

required, as the AVR65 and the remote IR these selections, you may use the front

link will provide that function. At the

AVR65, plug the audio interconnect

cables into the Multi Out jacks d on

the AVR65’s rear panel.

panel Information Display, or use the On-

Screen Display system. Either the semi-

OSD system may be used, in which case

the choices will appear as a single-line

display at the bottom of the screen, or as

a full screen display. When the full-OSD

display system is in use, the complete list

of choices will appear on the screen.

IR Lin k

The remote room IR receiver should be

connected to the AVR65 via standard

coaxial cable. Plug the IR connection

cable into the Multi jack c on the

AVR65’s rear panel.

NOTE: The remote power amplifier

must have signal sensing capability or

be left on constantly to assure automatic

operation at the remote room.

If other Harman Kardon compatible

source equipment is part of the main

room installation, the Remote IR Out

jack b on the rear panel should be

connected to IR IN jack on the CD player

or cassette deck. This will enable the

remote room location to control source

equipment functions as well as the

remote room input and volume.

To activate the semi-OSD, press the OSD

As an alternative, place the amplifier

that will provide power to the remote

location speakers in the same room as

the AVR65, and connect the Multi Out

jacks d on the rear panel to the audio

input of the remote room amplifier. Use

the appropriate speaker wire to connect

the optional power amplifier to the

remote speakers. High-quality wire of at

least AWG14 is recommended for long

multiroom connections.

button

press the OSD button

once. To activate the full-OSD,

three times.

this will turn the semi-OSD on and then

off. The full-OSD will appear on the third

button press.

Once you have determined which, if any

OSD system to use, setup and operation of

the multiroom system is simple.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Multiroom Operation

⁄

1. Press the Multi button fto initiate

the multiroom system. If the semi-OSD

system is engaged, a message will

appear at the bottom of the screen. If

the full-OSD system is engaged, the

complete multiroom menu (Figure 9)

will be shown on the video display.

Press the Set button iwithin five

seconds to enter the multiroom menus.

4. Within five seconds, press the or

If an optional IR sensor is located in the

remote room and connected to the

AVR65’s Multi IR jack, the multiroom

system may be turned on or controlled by

simply pointing the AVR65 remote, or an

optional programmable remote that

includes codes for the AVR65, at the IR

sensor. Note that depending on the type of

programmable remote used, it is probable

that the code for the Multi button will not

be contained in the pre-programmed

code library, and must be “learned” into

the remote, if possible.

buttons g to change the output level

for the multiroom feed. The volume

change will appear as a number in dB

increments below the 0dB reference

level in the front panel Information

Display, as a lower third semi-OSD

message, or as the last line in the

full-OSD status display.

MULTI

ROOM

OFF

5. Press the Set button ito enter the

setting. If no further buttons are

pressed within five seconds, the unit

will return to normal operation.

INPUT:

DVD

VIDEO

TUNER

TIMON

To change the input source for the source

to the multiroom feed once it has been

turned on, follow the instructions shown

above in the Multiroom Setup section of

MULTI

LEVEL:

Ð20

Multiroom Operation

Multiroom operation is simple, and it

may be controlled from either the main

listening room where the AVR65 is located, this manual.

or from a remote room when an optional

IR sensor is connected to the Multi jack

c on the rear panel.

Figure 9

⁄

2. Press the or buttons g to turn

the multiroom system on or off, as

indicated by the front panel

Once the multiroom system is turned on,

it will remain on even if the AVR65 is

placed in the Standby mode in the main

room by pressing the AVR Selector a

or the System Power Control 2on

the front panel. To turn the multiroom

Information Display message, the

semi-OSD message, or the change in

the highlighted video in the full-OSD

screen. Press the Set button ito

enter the settings.

To activate the feed to the remote room,

press the Multi button ¯ f on the

front panel or remote. Next, press the

⁄

or buttons g on the remote or the system off, press the Multi button ¯

⁄

Selector buttons ¸ on the front panel

until the MULTI indicator K illuminates

in the front panel Information Display.

Press the Set button i˜ to enter

the setting.

f, and then the or buttons g

on the remote or the Selector buttons

¸ on the front panel until the MULTI

indicator K goes out. Press the Set

button i˜ to enter the setting.

⁄

3. Within five seconds, press the or

buttons g to scroll through the

inputs. When the input source you wish

to send to the remote room location

appears on the front panel Information

Display, in the lower screen semi-OSD

message, or is highlighted in reverse

video in the full-OSD listing, press the

Set button ito enter the selection.

When the multiroom system is turned on,

the previously selected input will be fed to

the Multi Out jacks d on the rear panel.

The volume will be as set in the previous

selection, although it may be further

adjusted using an optional volume con-

trol in the remote location or on the

optional audio power amplifier connected

to the Multi Out jacks d.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming the Remote

The AVR65 is equipped with a powerful

remote control that will control not only

the receiver’s functions, but also most CD

players and cassette decks manufactured

by Harman Kardon. For increased flexi-

bility, the remote also contains the codes

for most popular brands of audio and

video equipment, including CD players,

cassette decks, TV sets, cable boxes, VCRs,

satellite receivers and other home-theater

equipment. Once the AVR65’s remote is

programmed with the codes for the pro-

ducts you own, it is possible to eliminate

most other remotes and replace them

with the convenience of a single, backlit

universal remote control.

3. Press and hold both the Device

Control Selector b for the type

of product to be entered (e.g., VCR,

TV) and the Mute button d at the

same time. Hold both buttons until

the red light under the button stays

lit. Note that the next step must take

place while the red light is on, and it

must begin within 20 seconds after

the light illuminates.

7. If a code cannot be entered to turn the

unit off, if the code for your product

does not appear in the tables in this

manual, or if not all functions oper-

ate properly, try programming the

remote with the Auto Search Method.

Auto Search Method

If the unit you wish to include in the

AVR65’s remote is not listed in the code

tables in this manual, or if the code does

not seem to operate properly, you may

wish to program the correct code using

the Auto Search method as shown below.

4. Point the AVR65’s remote towards the

unit to be programmed, and enter the

first three-digit code number using the

Numeric buttons l. If the unit

turns off, the correct code has been

entered. Press the Device Control

Selector b again, and note that

the red light will flash twice to confirm

the entry before going dark.

1. Turn on the unit that you wish to

include in the AVR65 remote.

Programming the Remote

As shipped from the factory, the remote

is fully programmed for all AVR65 func-

tions, as well as those of most Harman

Kardon CD changers, CD players and cas-

sette decks. In addition, by following one

of the methods below, you may program

the remote to operate a wide range of

devices from other manufacturers.

2. Press the Device Control Selector

b for the type of product to be

entered (e.g., VCR, TV) and the Mute

button d at the same time. Hold

both buttons until the red light under

the button stays lit. Note that the next

step must take place while the red

light is on, and it must begin within

20 seconds after the light illuminates.

5. If the device to be programmed in

does NOT turn off, continue to enter

the three-digit code numbers until

the equipment turns off. At this point,

the correct code has been entered.

Press the Device Control Selector

b again, and note that the red light

will flash twice to confirm the entry

before going dark.

Direct Code Entry

3. Point the AVR65 remote towards the

unit to be programmed, and press

and hold the Surround Mode

This method is the easiest way to

program your remote to work with

different products.

6. Try all of the functions on the remote

to make certain that the product

Selector y or the Sleep button

`. This will send out a series of

codes from the remote’s built-in data

base, with each flash of the red light

under the Device Control Selector

indicating that a code has been sent.

When the device to be programmed

turns off, IMMEDIATELY release the

Surround Mode or Sleep button.

operates. Keep in mind that many

manufacturers use a number of dif-

ferent combinations of codes, and it

is a good idea to make certain that

not only the Power control works, but

the volume, channel and transport

controls, as appropriate. If all func-

tions do not work properly, you may

need to use a different remote code.

1. Use the tables in the following pages

to determine the three-digit code or

codes that match both the product

type (e.g., VCR, TV), but also the

specific brand name. If there is more

than one number for a brand, make

note of the different choices.

2. Turn on the unit you wish to program

into the AVR65 remote.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming the Remote

4. Press the Device Control Selector

again, and note that the red light will

flash twice to confirm the entry before

going dark.

2. Press the Night button j. The red

light under the Device Control

Selector b will blink in a

sequence that corresponds to the

three-digit code, with a one-second

pause between each digit. Count the

number of blinks between each pause change their function so that they corre-

to determine the digit of the code. spond to a secondary label on the remote.

One blink is the number 1, two blinks For example, the Sleep and Surround

is the number 2, and so forth. Ten

blinks are used to indicate a “0”.

When operating a device other than the

AVR65, the controls may not correspond

exactly to the function printed on the

remote or button. Some commands, such

as the volume control, are the same as

with the AVR65. Other buttons will

5. Try all of the functions on the

remote to make certain that the

product operates. Keep in mind that

many manufacturers use a number

of different combinations of codes,

and it is a good idea to make certain

that that not only the Power control

works, but the volume, channel and

transport controls, as appropriate. If

all functions do not work properly,

you may need to Auto-Search for a

different code, or enter a code via the

Direct Code Entry method.

Mode selector buttons also function as the

Channel Up and Channel Down buttons

when operating most TV sets, VCRs or

cable boxes. The Channel Up/Down indi-

cation is printed directly on the remote.

Example: One blink, followed by a one-

second pause, followed by six blinks, fol-

lowed by a one-second pause, followed by The same is true for standard CD player,

ten blinks indicates that the code has

been set to 160.

cassette deck, VCR and DVD functions,

which follow the standard function icons

printed on top of the buttons.

For future reference enter the Setup Codes

for the equipment in your system here:

Code Readout

For some products, however, the function

of a particular button does not follow the

command printed on the remote. In

order to see which function a button

controls, consult the Function List tables

printed in this manual. To use those

tables, first check the type of device being

controlled (e.g., TV, VCR). Next, look at

the remote control diagram pictured on

the following page. Note that each button

has a number on it.

When the code has been entered using the

Auto Search method, it is always a good

idea to find out the exact code so that it

may be easily reentered if necessary. You

may also read the codes to verify which

device has been programmed to a specific

Control Selector button.

AUX

TAPE

SAT

VCR

CBL

Programmed Device Functions

Once the AVR65’s remote has been pro-

grammed for the codes of other devices,

press the appropriate Device Control

Selector b to change the remote from

control over the AVR65 to the additional

product. When you press any of the

Device Control Selectors, it will

briefly flash in red to indicate that you

have changed the device being controlled.

1. Press and hold both the Device

Control Selector b for the type

of product to be entered (e.g., VCR,

TV) and the Mute button d at the

same time. Hold both buttons until

the red light under the button stays

lit. Note that the next step must take

place while the red light is on, and it

must begin within 20 seconds after

the light illuminates.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming the Remote

To program a macro into the Power

button, follow these steps:

To find out what function a particular

button has for a specific device, find

the button number on the Function List

and then look in the column for the

device you are controlling. For example,

button number 5 is the Test Tone button

for the AVR65, but it is the “Favorite”

button for many VCRs and Satellite

receivers. Button number 31 is the

Preset Tune Down button for the AVR65,

the “Reverse Skip” button for CD players

and the “Page Down” button for some

cable boxes.

1. Press any of the Device Control

Selectors b and the Mute button

d at the same time until the red

light under the Device Control

Selector turns on.

2. Press the Power button c and

note that the Device Control Selector

will blink once.

3. Enter up to eight macro steps, by

pressing the Device Control button

and then the function button for each

step you wish to enter. To enter the

“Power On/Off” command during

macro programming, press the Mute

button d. DO NOT press the actual

Power Button.

Notes on Usin g th e AVR65 Rem ote With

Oth er Devices.

• Manufacturers may use different code

sets for the same product category. For

that reason, it is important that you

check to see if the code set you have

entered operates as many controls as

possible. If it appears that only a few

functions operate, check to see if

another code set will work with more

buttons.

4. When the eight steps have been

entered, press the Sleep button ` to

enter the commands. The red light

under the Device Control Selector

will blink and then turn off.

• When a button is pressed on the AVR65

remote, the red light under the

Device Control Selector b for

the product being operated should

flash briefly. If the Device Control

Selector flashes for some, but not all

buttons for a particular product, it

does NOT indicate a problem with the

remote, but rather that no function is

programmed for the button being

pushed.

Example: To program your TV,

Cable Box and the AVR65 to turn on

when the Power button is pressed,

first press-and-hold the AVR a

and Mute buttons d until the

red light comes on under the AVR

button. Next, press the Mute button

d to enter the Power command

for the AVR. Press the TV Device

Control Selector b to select

the TV mode, and then press the

Mute button d again, to select

TV Power. Finally, press the CBL

Device Control Selector b

followed by the Mute button d to

select Cable Power. Press the Sleep

button ` to enter the commands.

Macro Programming

The Power button may be programmed to

send out a sequence of up to eight com-

mands when it is pushed. This enables

you to turn on a number of products,

and to have a program source turn to a

favorite channel or any other command.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming the Remote

After following these steps, each time

you press the Power button c, the

remote will send the Power On/Off

command each time the Power

button is pressed.

1. Press the Device Control Selector

b for the unit you wish to have asso-

ciated with the volume control and the

Mute button d at the same time

until the red light illuminates under

the Device Control Selector.

Reassigning Device Control

Selectors

Although each of the seven Device

Control Selectors b is normally

assigned to the category of product shown

on the remote, it is possible to reassign

one of these buttons to operate a second

device of another type. For example, if you

have two VCRs, but no satellite receiver,

you may program the “SAT” button to

operate a second VCR. Before following

the normal programming steps for either

Three-Digit entry or Auto Search code

entry, you must first reassign the button

with the following steps:

To remove a macro program, follow steps

1, 2 and 4 above, but do not follow step

three. For example, to erase the macro

just entered, press the Device Control

Selector b and the Mute button d

at the same time until the red light

under the Device Control Selector turns

on. Press the Power button c, and

then press the Sleep button `. The

red light under the Device Control

Selector will blink twice to confirm the

data entry and then turn off.

2. Press the Volume Up button z.

3. Press either the AVR a or the

TV Device Control Selector

b, depending on which system’s

volume control you wish to have

attached for the punch-through mode.

Note that the red light under the

Device Control Selector will blink

twice and then go out to confirm the

data entry.

1. Press the Device Control Selector

b you wish to reassign and the

Mute button d at the same time

until the red light illuminates under

the Device Control Selector.

Volume Punch-Through

Example: To have the AVR’s vol-

ume control be activated even

though the remote is set to control

the TV, first press the TV Device

Control Selector b, and the

Mute button d at the same time.

Next, press the Volume Up button

z, followed by the AVR Device

Control Selector a.

The AVR65’s remote may be programmed

to operate the Volume Control z

from either the TV or the AVR to operate in

conjunction with any of the eight devices

controlled by the remote. For example,

since the AVR65 will likely be used as the

sound system for TV viewing, you may

wish to have the AVR’s volume activated

although the remote is set to run the TV.

Either the AVR or TV volume control may

be associated with any of the remote’s

devices. To program the remote for Volume

Punch-Through, follow these steps:

2. Press the Device Control Selector

b for the function you wish to

program into the reassigned button.

3. Enter the three-digit code for the spe-

cific model you wish the reassigned

button to operate.

NOTE: Should you wish to return the

remote to the original configuration after

entering a Volume Punch-Through, you

will need to repeat the steps shown above.

However, press the same Device Control

Selector in steps one and three.

4. Press the same Device Control

Selector pressed in Step 1 again to

store the selection.

Example: To use the SAT button to

operate a second VCR, first press the

SAT Device Control Selector

b, and the Mute button d at

the same time until the red light

glows under the SAT button. Press

the VCR button, followed by the

three-digit code for the specific

model you wish to control. Finally,

press the SAT button again.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming the Remote

Function List

No. Button Nam e

Tape

Aux (DVD)

VCR

CBL

SAT

Power On/Off

Sleep

Vol UP

Mute

Test Tone

Surr

Vol Down

Multiroom

Speaker

Power

Skip+

Vol+

Power On/Off Power On/Off Power On/Off Power On/Off

CH+

Vol+

Mute

CH+

Vol+

Mute

Fav

CH–

Vol–

Guide

Exit

Vol+

Vol–

Vol+

Mute

Fav

CH–

Vol–

Mute

Skip–

Vol–

Guide

Clear

CH–

Vol–

Display

Exit

Guide

Exit

Intro Scan

10 Night

11 Delay

12 Level +/UP

13 Level –/Down

14 Digital

15 Channel

16 Set

Open/Close

Disk Skip +

Disk Skip –

Return

Down

Right

Left

Select

Sub On/Off

Prev CH

Down

Right

Left

Prev CH

Down

Right

Left

Select

Music

Prev CH

Down

Right

Left

Select

Alt

Select

17 AM/FM

18 CD

19 Rec/Pause

20 Stop

21 Tape

Pause

Stop

Record/Pause

Stop

Rec

Stop

Open/Close

22 Vid 1

23 Rev Play

24 Fwd Play

ﬁ

Rev Play

Fwd Play

ﬂ

Play

25 DVD

26 Vid 2

27 Tuning Down

28 Tuning Up

29 6 CH

‚

Rev Search

Fwd Search

Rew

Search –

Search +

Rew

Day –

Day

—

30 Vid 3

31 Preset Down

32 Preset Up

‡

Rev Skip

Fwd Skip

Page –

Page +

Pause

Time

Repeat

Random Play

+ 10

Enter

43 Direct

44 Memory

45 FM Mode

46 Clear

Enter

Sleep

TV/VCR

Enter

PPV

Switch

Bypass

TV/VCR

TV/SAT

47 Info

48 Light

Display

Info

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming the Remote

Reference for Function List

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming the Remote

Setup Code Tables: TV

Ma nufa cturer / Br a nd

Setup Code Number

A MARK

ADMIRAL

AKAI

112

072 081 161

001 167

073 167

AMPRO

ANAM

AOC

043 054 055 056 080 104 108 112 118 121

001 004 058 112

CANDLE

CAPEHART

CENTRONIC

CITIZEN

CLASSIC

CONCERTO

CONTEC

CORONADO

CRAIG

001 002 003 004

058

043

001 002 003 004 101 143

043

004

043 051

143

054

143

CROWN

CURTIS MATHES

CXC

001 004 101 143

043

DAEWOO

DAYTRON

DWIN

DYNASTY

DYNATECH

ELECTROHOME

EMERSON

FISHER

004 055 103 111 114 127 143

004 143

177

043

062

024 143

001 004 005 028 043 047 048 051 096 143 151 153 154 155

007 057

FUNAI

FUTURETECH

028 043

043

004 008 009 034 056 073 074 091 130 144 155 160 161

GOLDSTAR

HALL MARK

HITACHI

INFINITY

INKEL

JBL

JCP

004 106 110 112 113 119 127 143

004

004 007 010 011 012 023 075 143 158 163

164

129

164

001

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming the Remote

Setup Code Tables: TV (Continued)

Ma nufa cturer / Br a nd

Setup Code Number

JC PENNY

JENSEN

JVC

KENWOOD

KLOSS

004 008 024 030 065 101 143 160

013

034 038 070 083

001 070

002 059

KTV

LODGENET

LOGIK

043 143 154

072

LUXMAN

LXI

MAGNAVOX

MARANTZ

MATSUI

MEMOREX

METZ

004

007 015 052 081 160 164

001 003 004 022 059 060 061 063 064 127 164

001 164

164

004 007 072

088

MGA

001 004 024 042

088

004 024 040 042 109 146

001 004 062 101

MINERVA

MITSUBISHI

MTC

NAD

NEC

015 025

001 019 024 040 056 130 134

NIKEI

ONKING

ONWA

043

OPTONICA

PANASONIC

PHILCO

PHILIPS

PIONEER

PORTLAND

PROSCAN

PROTON

QUASAR

RADIO SHACK

RCA

019 081

034 056 080 164

001 003 004 024 056 059 060 063 064 127 143 164

001 003 004 005 038 059 093 164

004 018 023 025 135 176

004 143

144 160 161 167

004 058 143 171 173

034 056

004 019 047 127 143

001 004 023 024 056 065 074 144 152 156 160 161

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming the Remote

Setup Code Tables: TV (Continued)

Ma nufa cturer / Br a nd

Setup Code Number

REALISTIC

RUNCO

SAMPO

007 019 047

072 169

001 004 058

SAMSUNG

SANYO

SCOTT

004 101 127 133 143 160

007 020 021 033 053 057 082

004 028 043 048 143

SEARS

SHARP

004 007 015 028 030 057 082 094 143 160

004 014 019 022 028 143 175

SIGNATURE

SONY

SOUNDESIGN

SPECTRICON

SSS

072

070 085 126 139

003 004 028 043

112

004 043

SUPRE MACY

SYLVANIA

SYMPHONICS

TANDY

002

001 003 059 060 063 064 127 160 164

052

081

056 062

TATUNG

TECHNICS

TECHWOOD

TENIKA

TELERENT

TERA

034 080

004

002 003 004 028 043 072 101 143

072

172

TMK

004

TOSHIBA

TOTEVISION

UNIVERSAL

VIDEO CONCEPTS

VIDIKRON

VIDTECH

WARDS

015 030 040 062 101

143

008 009

146

174

004

004 008 009 019 028 060 061 063 064 072 074 164

YAMAHA

YORK

YUPITERU

ZENITH

004

043

072 073 095 103

112

ZONDA

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming the Remote

Setup Code Tables: VCR

Ma nufa cturer / Br a nd

Setup Code Number

AIWA

AMPRO

034

072

ANAM

031 103

012 023 043

035 037 129

028 031

AUDIO DYNAMICS

BROKSONIC

CANON

CAPEHART

CRAIG

CURTIS MATHES

DAEWOO

DAYTRON

DBX

108

001 040 135

031 041

007 010 017 065 108 111

108

012 023 043

DYNATECH

ELECTROHOME

EMERSON

FISHER

034 053

059

006 017 025 027 029 031 034 035 036 037 046 101 129 131 138 153

001 008 009 010

034

FUNAI

031 063 072 107 109 144 147

132 136

004 012 020 101

012 045

GO VIDEO

GOLDSTAR

HARMAN KARDON

HITACHI

018 026 034 043 063 137 150

INSTANTREPLAY

JCL

JC PENNY

JENSEN

031

004 012 040 101

043

JVC

KENWOOD

LLOYD

012 031 043 046 055 060 130 150 152

014 034 048

034

LXI

MAGIN

001 004 009 017 034

040

MAGNAVOX

MARANTZ

MARTA

031 034 041 067 068

012 031 067 069

101

027 030

MATSUI

MEI

MEMOREX

MGA

031

001 010 014 031 034 040 053 072 101 134 139

045 046 059

MINOLTA

MITSUBISHI

MTC

MULTITECH

NEC

004 020

004 020 046 051 059 061 142

034 040

024 034

012 023 043 048

043

MORDMENDE

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming the Remote

Setup Code Tables: VCR (Continued)

Ma nufa cturer / Br a nd

Setup Code Number

OPTONICA

PANASONIC

PENTAX

PHILCO

PHILIPS

PILOT

053 054

070 133 140

004 020 031 063

031 034 067

031 034 054 067 101

101

PIONEER

PORTLAND

PULSAR

QUARTZ

RCA

004 021 048

108

072

014

004 020 034 040 041 107 109 140 144 147

REALISTIC

RICO

RUNCO

001 008 010 014 031 034 040 053 054 101

058

072

SALORA

SAMSUNG

SANSUI

014

017 040 107 109 113 115 124

043 048 135

001 007 010 014 040 134

SANYO

SCOTT

SEARS

017 037 129 131

001 004 008 009 010 014 017 020 081 101

SHARP

SHINTOM

SONY

031 054

024

001 009 031 052 056 057 058

SOUNDESIGN

STS

SYLVANIA

SYMPHONIC

TANDY

034

004

031 034 059 067

034

010 034

ATATUNG

TEAC

TECHNICS

TEKNIKA

THOMAS

TMK

043

034 043

031 070

031 034 101

034

006

TOSHIBA

TOTEVISION

UNITECH

VECTOR RESEARCH

VICTOR

VIDEO CONCEPTS

VIDEOSONIC

WARDS

004 008 017 059 082 131

040 101

040

012

048

012 034 046 141

040

001 004 017 024 031 034 040 053 054 131

012 034 043

034 048 056 058 072 080 101

YAMAHA

ZENITH

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming the Remote

Setup Code Tables: CD

Ma nufa cturer / Br a nd

Setup Code Number

ADCOM

AIWA

AKAI

062 042

187 170

202 195

CARVER

DENON

HARMAN KARDON

JVC

003 167 041 135 138 139 050 203

205 226

047 033 208 001 002

022 136 163

KENWOOD

MARANTZ

MONDIAL

NAD

NAKAMICHI

ONKYO

007 055 023 137 072 142

107 044

147

215 005

217 218 219

038 168 030

OPTIMUS

PANASONIC

PIONEER

REALISTIC

RCA

SHARP

SHERWOOD

SONY

049 085

068

010 020 174

181 187 102

012 150

013 051 066 031

166 112 115 119 093

225 097 126 133 081

062 131 015 182

068 200 008 060

012 054 024

TEAC

TECHNICS

YAMAHA

Setup Code Tables: AUX (DVD)

Ma nufa cturer / Br a nd

Setup Code Number

DENON

001

010

012

002

003

012

004

005

006

011

007

008

009

MAGNAVOX

MITSUBISHI

PANASONIC

PHILIPS

PIONEER

PROSCAN

RCA

SAMSUNG

SONY

TOSHIBA

YAMAHA

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming the Remote

Setup Code Tables: CABLE

Ma nufa cturer / Br a nd

Setup Code Number

Remote Contr ol Model

PIONEER

AMERICAST

JERROLD

PIONEER

SCIENTIFIC-ATLANTIC

TOCOM

ZENITH

001

005

006

007

002

003

004

010

008

009

BR-200

RT-J22 (CFT2200)

RT-J550C

BR-95

RT-P81/82

RT-S6X/USV86

RT-T7/T8

MN2500

RT-ZPMV

Setup Code Tables: SAT

Ma nufa cturer / Br a nd

Setup Code Number

001

007

006

001 012

003

013

002

005

001

ALPHASTAR

ECHOSTAR

HITACHI

HUGHES

PANASONIC

PRIMESTAR

RCA

SONY

TOSHIBA

UNIDEN

004

008

009 010

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting Guide

SYMPTOM

CAUSE

SOLUTION

No front panel lights when power

switch is pressed

• No AC Power

• Make certain AC power cord is plugged into

a live outlet

• Check to see if outlet is switch controlled

Display lights, but no sound

or picture

• Intermittent input connections

• Make certain that all input and speaker connections

are secure

• Mute is on

• Volume control is down

• Press Mute button

• Turn up volume control

No sound from any speaker.

Light around power switch is red

• Amplifier is in protection mode

due to possible short

• Amplifier is in protection mode

due to internal problems

• Check speaker-wire connections

at receiver and speaker ends for shorts

• Contact your local Harman Kardon service depot

No sound from surround or

center speakers

• Incorrect surround mode

• Input is monaural

• Incorrect configuration

• Stereo or Mono program material

• Select a mode other than Stereo

• There is no surround information from mono sources

• Check speaker mode

• The surround decoder may not create center or rear

channel information from non-encoded programs

Unit does not respond to

remote commands

• Weak batteries in remote

• Wrong device selected

• Remote sensor is obscured

• Change remote batteries

• Press the AVR selector

• Make certain front panel sensor is visible to remote

or connect remote sensor

Intermittent buzzing in tuner

• Local interference

• Move unit or antenna away from computers, fluorescent

lights, motors or other electrical appliances

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical Specifications

Audio Section

Stereo Mode

FM Tun er Section

Frequency Range

87.5–108MHz

Continuous Average Power (FTC)

Usable Sensitivity

Signal-to-Noise Ratio

Distortion

Stereo Separation

Selectivity

Image Rejection

IF Rejection

Tuner Output Level

IHF 1.3 µV/13.2dBf

Mono/Stereo 70/68dB

Mono/Stereo 0.3/0.5%

40dB @ 1kHz

±400kHz, 65dB

80dB

75 Watts per channel 20Hz–20kHz:

@ < 0.07% THD, both channels driven into 8 ohms

Five-Channel Surround Mode

Power Per Individual Channel

90dB

Front L&R channels:

65 Watts per channel,

1kHz, ±75kHz Dev 500mV

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

65 Watts, @ < 0.07% THD, 20Hz–20kHz into 8 ohms

AM Tun er Section

Frequency Range

Signal-to-Noise Ratio

Usable Sensitivity

Distortion

520–1710kHz

45dB

Loop 500µV

1kHz, 50% Mod 0.8%

±10kHz, 30dB

Surround channels:

65 Watts per channel,

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Selectivity

Input Sensitivity/Impedance

Linear (High Level)

200mV/47 kohms

95dB

Video Section

Signal-to-Noise Ratio (IHF-A)

Video Format

NTSC

Surround System Adjacent Channel Separation

Input Level/Impedance 1Vp-p/75 ohms

Output Level/Impedance 1Vp-p/75 ohms

Video Frequency Response 10Hz–8MHz (–3dB)

Analog Decoding

(Pro Logic, etc.)

Dolby Digital (AC-3)

DTS

40dB

55dB

Gen eral

Frequency Response

@ 1W (+0dB, –3dB)

Power Requirement

Power Consumption

AC 120V/60Hz

78W idle, 402W maximum

(2 channels driven)

8Hz–80kHz

±35 Amps

High Instantaneous

Current Capability (HCC)

Dimensions (Max)

Width

17.3 inches (440mm)

6.5 inches (165mm)

17.1 inches (435mm)

32 lbs. (14.5 kg)

Transient Intermodulation

Distortion (TIM)

Height

Depth

Weight

Unmeasurable

16 µsec

Rise Time

Slew Rate

40V/µsec

Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

*Manufactured under license from Dolby Laboratories.

“Dolby,” “Pro Logic,” “AC-3” and the Double-D symbol are

trademarks of Dolby Laboratories. Confidential Unpublished

^†DTS and DTS Surround are trademarks of Digital Theater Systems.

^††UltraStereo is a trademark of UltraStereo Corp.

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

AVR 65

DIGITAL

COAX

AC-3

•

T MON

DVD

VID 1

VID 2

VID 3

6 CH

AM/ FM

TUNING

Power

Phones

Printed in China

Part #1111-AVR65OM

6311-005-010

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Harman Kardon

AVR65

Audio/VideoReceiver

Volume

Speaker Multi Room Dig. Select Delay

DIGITAL

Set

COAX

AC-3

AM/ FM

TUNING

PRESET SCAN

PRESET

TUN MODE

DIGITAL

PRO LOGIC

3-STEREO HALL 1

HALL 2

THEATER

SURR. OFF

Mute

Bass

Treble

Balance

VIDEO 3

Min

Max

Min

Max

Video

Audio

Owner’s Manual

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Owner’s Manual

AVR65 Audio/Video Receiver

Table of Contents

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3

Unpacking and Installation . . . . . . . . . . . . . . . . . . . . . . 3

Front Panel Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6

Front Panel Information Display . . . . . . . . . . . . . . . . . . . . . . 7–8

Rear Panel Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–10

Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . 11–13

Installation and Connections . . . . . . . . . . . . . . . . . . . . . . . 14–15

System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16–22

Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23–30

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Using the On-Screen Display . . . . . . . . . . . . . . . . . 23–24

Source Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Surround Mode Selection . . . . . . . . . . . . . . . . . . . . . . . 25

Surround Mode Chart . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Digital Audio Playback. . . . . . . . . . . . . . . . . . . . . . 27–28

Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 28–29

Tape Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Output Level Trim Adjustment . . . . . . . . . . . . . . . . . . . 30

6-Channel Direct Input. . . . . . . . . . . . . . . . . . . . . . . . . 30

Memory Backup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Processor Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Multiroom Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31–32

Programming the Remote . . . . . . . . . . . . . . . . . . . . . . . . . 33–45

Direct Code Entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Auto Search Method . . . . . . . . . . . . . . . . . . . . . . . . 33–34

Code Readout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Programmed Device Functions . . . . . . . . . . . . . . . 34–35

Macro Programming . . . . . . . . . . . . . . . . . . . . . . . 35–36

Volume Punch-Through. . . . . . . . . . . . . . . . . . . . . . . . 36

Reassigning Device Control Selectors. . . . . . . . . . . . . . 36

Function List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37–38

Setup Code Tables: TV. . . . . . . . . . . . . . . . . . . . . . . 39–41

Setup Code Tables: VCR . . . . . . . . . . . . . . . . . . . . . 42–43

Setup Code Tables: CD . . . . . . . . . . . . . . . . . . . . . . . . . 44

Setup Code Tables: AUX (DVD) . . . . . . . . . . . . . . . . . . . 44

Setup Code Tables: CABLE . . . . . . . . . . . . . . . . . . . . . . 45

Setup Code Tables: SAT . . . . . . . . . . . . . . . . . . . . . . . . . 45

Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

250 Crossways Park Drive

Woodbury, NY 11797

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Staple or clip original invoice here. ▼

AVR65 120 volt Rev (C) 10/6/98

Download from Www.Somanuals.com. All Manuals Search And Download.

Grizzly Riding Toy H0771 User Manual
Grizzly Sander H8192 User Manual
Haier Refrigerator ECR27B User Manual
Haier Washer Dryer XQB55 10H User Manual
Harbor Freight Tools Mobility Aid 94057 User Manual
Hasselblad Digital Camera H1D User Manual
Heath Zenith Work Light SL 4305 User Manual
Honeywell Electric Heater HCE311V User Manual
Huawei Cell Phone Y300 User Manual
Image Treadmill IMTL396063 User Manual