Harbor Freight Tools Welder 94101 User Manual

ITEM 94101 Pipe Thread Kit  
(5 Piece Set - 3 Dies)  
Assembly and Operating Instructions  
®
3491 Mission Oaks Blvd., Camarillo, CA 93011  
Copyright © 2006 by Harbor Freight Tools®. All rights reserved. No portion of  
this manual or any artwork contained herein may be reproduced in any shape  
or form without the express written consent of Harbor Freight Tools.  
For technical questions and replacement parts, please call 1-800-444-3353  
Specifications  
Kit includes Ratchet Head with Coupler, 2 Handles, 3 Dies, and Blowmold Case  
Die Sizes: 1/2” (14 TPI); 3/4” (14 TPI); 1(11.5 TPI)  
Ratchet Head is Reversible; Dies Are Replaceable  
Save This Manual  
You will need the manual for the safety warnings and precautions, assembly instructions,  
operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual.  
Write the invoice number on the manual for safekeeping. Keep the manual and invoice in a safe  
and dry place for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13. Guard against electric shock. Prevent body contact with grounded surfaces such as  
pipes, radiators, ranges, and refrigerator enclosures.  
14. Replacement parts and accessories. When servicing, use only identical replacement  
parts. Use of any other parts will void the warranty. Only use accessories intended for use  
with this tool. Approved accessories are available from Harbor Freight Tools.  
15. Do not operate tool if under the influence of alcohol or drugs. Read warning labels  
on prescriptions to determine if your judgment or reflexes are impaired while taking drugs.  
If there is any doubt, do not operate the tool.  
Unpacking  
When unpacking, check to make sure that all parts and accessories are included and in  
good condition. If any parts are missing or broken, please call Harbor Freight Tools at the  
number on the cover of this manual as soon as possible.  
Preparation for Pipe Threading  
1. Assemble the Handle parts (18 and 20) and insert threaded portion of Handle (18) into  
Ratchet Holder (8).  
2. Determine the size of the pipe to be threaded.  
3. Pick the appropriate die to be used. Die sizes are stamped on the outside of each die.  
4. Insert the die into the Ratchet Holder. It is a force fitting, and once the die is in the Ratchet  
Holder, it may require light tapping with a wooden mallet to remove the die.  
5. Have an oil can available to be used during the threading operation.  
6. The pipe to be threaded must be properly secured during the threading operation.  
7. To reverse the threading direction, pull out the reversing knob, turn it 180 degrees until the  
arrow points in the opposite direction and drop it back into place.  
Operation  
Now that the proper die is installed, you are ready to attach  
the Ratchet Holder to the pipe, and begin cutting threads.  
1. Place the rear of the die over the end of the pipe to be  
threaded. Verify that the inside diameter of the die  
matches the outside diameter of the pipe.  
2. Make sure that the pipe to be threaded is properly  
held in place.  
SKU 94101  
For technical questions, please call 1-800-444-3353.  
Page 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation (continued)  
Caution: Make sure the pipe end and threads of the die are suffi-  
ciently oiled at all times. Otherwise, die life will be shortened and  
the threads will be rough.  
3. While applying pressure to the end of the pipe, begin rotating the Handle around the pipe  
to engage the die to the pipe end. Continue this operation until the desired thread length  
is achieved.  
4. To disengage the Ratchet Holder after threading is complete, follow steps discussed in #7  
on prior page to reverse the direction, and then rotate the Handle until the die is disen-  
gaged from the pipe end.  
5. When sliding the pipe out of the Ratchet Holder, be careful not to damage newly cut  
threads.  
Maintenance  
1. Clean the Pipe Threading tool after each use. Clean dies after each use. Check for bro-  
ken teeth or pipe material between teeth.  
2. When not in use, store all parts in the case, and store the case in a dry location.  
SKU 94101  
For technical questions, please call 1-800-444-3353.  
Page 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS LIST  
PART NO.  
P005-1  
P005-2  
P005-3  
P005-4  
P005-5  
1
2
3
4
5
6
7
8
DESCRIPTION  
DIE’S THREADER 1/2"  
DIE’S THREADER 3/4"  
DIE’S THREADER 1"  
DIE’S FRAME  
WORK HANDLE  
SCREW  
COVER  
DIES  
DIES HEAD  
SCREW  
Q’TY  
PART NO.  
DESCRIPTION  
RATCHET HOLDER  
CONNECTING ROD  
ROD CONNECTOR  
ROD  
Q’TY  
1
1
1
1
1
4
1
4
1
3
1
1
1
9
1
1
1
1
1
1
1
1
1
1
1
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
PLASTIC HANDLE  
PAWL  
PRESS SPRING  
TIGHTENING RING  
RETAINING RING  
SPRING BOLT  
KNOB  
PLASTIC RING  
RATCHET  
STEEL RETAINING RING  
SKU 94101  
For technical questions, please call 1-800-444-3353.  
Page 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED 90 DAY  
WARRANTY  
Harbor FreightTools Co. makes every effort to assure that its products meet high quality and durability standards,  
and warrants to the original purchaser that this product is free from defects in materials and workmanship for  
the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or  
indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, or to lack of  
maintenance.We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,  
special or consequential damages arising from the use of our product. Some states do not allow the exclusion  
or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you.  
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,  
INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.  
To take advantage of this warranty, the product or part must be returned to us with transportation charges  
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our  
inspection verifies the defect, we will either repair or replace the product at our election or we may elect to  
refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return  
repaired products at our expense, but if we determine there is no defect, or that the defect resulted from  
causes not within the scope of our warranty, then you must bear the cost of returning the product.  
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.  
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353  
SKU 94101  
For technical questions, please call 1-800-444-3353.  
Page 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Welder 25 oz C04074 User Manual
Grizzly Nail Gun G6045 User Manual
Harbor Freight Tools Log Splitter 91839 User Manual
Hasbro Portable Speaker 75024 User Manual
Heatiator Stove ECO ADV WS22 User Manual
HP Hewlett Packard Computer Hardware B110I User Manual
HP Hewlett Packard PDAs Smartphones 820 820e User Manual
HP Hewlett Packard Yard Vacuum 8562A User Manual
Hubbell Stereo System SZ 21 User Manual
Husqvarna Trimmer 952711947 User Manual