DELUXE PET CRATE
WITH TRAY
94444
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Copyright © 2006 by Harbor Freight Tools®. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions please call 1-800-444-3353
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY AND CAUTIONARY INSTRUCTIONS
1. The Wire Pet Cage (#1) comes collapsed for transportation and storage. This strong,
durable steel Wire Pet Cage has good ventilation and visibility for your pet and is excellent
for home and travel use. (See Figure 1).
Figure 1
2. Open collapsed Wire Pet Cage (#1). Lift Back Side (#2) and snap into Latches (#5) securely.
(See Figure 2 & 3).
#4
#5
#7
Figure 2
Figure 3
Figure 4
3. Lay Tray (#8) on the bottom of the Cage and latch sides around Tray. Please
note that Tray MUST be inside Wire Pet Cage before the Cage is fully assembled.
4. Lift Front Side (#3) with Pet Cage Door (#7) and snap into Latch (#4) (See Figure 4).
Be sure all sides are snapped into place. (See Figure 7).
5. Familiarize yourself with the Spring Plastic Hook Latch (#6) before placing animal in Wire
Pet Cage (#1). Close Door (#7). Hook Latch (#6) points down. To lock and unlock, push
black Hook Latch, lift up and drop in place. Reverse to unlock. Always check to make sure
Door is properly closed and locked. (See Figure 5, 6 , 7).
#6
▼
▼
▼
Figure 5
Figure 6
Figure 7
6. This is a temporary animal Pet Cage only. Always check that Hook Latch (#6) is locked after
placing animal in Cage. Have water in Cage for your pet and never leave animal unattended in
hot car. A piece of carpet remnant or appropriate padding (not included) should always be used
to protect pet’s paws.
SKU 94444
PAGE 3
Rev 05/06
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
PART #
DESCRIPTION
QTY
Wire Pet Cage (Top/Bottom and 2 Sides)
Back Side
Front Side
Latch (Top of Cage)
Latches (Bottom of Cage)
Spring Plastic and Hook Latch
Pet Cage Door
4
1
1
2
8
1
1
1
1
2
3
4
5
6
7
8
Tray
#3
#4
#1
#8
8
#6
Not
#2
Shown
#7
NOTE:Tray not shown to scale.
Tray fits on the bottom of the
Pet Crate.
#5
#8
MAINTENANCE
1. For better and safer performance, keep all parts of this product clean and dry. Pet
Crate can be hosed off to clean.
2. Periodically check to see that all hardware is in place.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO
REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES
ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE-
MENT PARTS THERETO.
SKU 94444
PAGE 4
Rev 05/06
Download from Www.Somanuals.com. All Manuals Search And Download.
|