Apple peeler
Model 96153
AsseMbly And OperAtiOn instructiOns
Duetocontinuingimprovements,actualproductmaydifferslightlyfromtheproductdescribedherein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
tO preVent seriOus injury, reAd And understAnd
All wArnings And instructiOns befOre use.
©
®
Copyright 2007 by Harbor Freight Appliances . All rights reserved. No portion
of this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Appliances.
fortechnicalquestionsorreplacementparts,pleasecall1-800-444-3353.
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Maintain appliances with care. Keep blade sharp and clean. Properly maintained
appliances with a sharp cutting edge are less likely to bind and are easier to control.
Do not use a damaged appliance.
8. check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the appliance’s operation. Many accidents are
caused by poorly maintained appliances.
9. Maintain labels and nameplates on the appliance. These carry important infor-
mation. If unreadable or missing, contact Harbor Freight Appliances for a replace-
ment.
unpAcKing
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Appliances at the number shown
on the cover of this manual as soon as possible.
AsseMbly instructiOns
1. Press Handle (1) onto Crankshaft (8). Apple Peeler is ready for use.
OperAtiOn instructiOns
clean each part with soap and water before using. dry thoroughly.
caution: Blade and Spikes are extremely sharp. Be careful when working near them.
1. Place Apple Peeler on a clean and level surface and rotate Handle until the Blade is
at the bottom position of it’s arc.
2. Push apple down on Spikes (7) and remove Blade Cover (5).
3. Turn handle (1) clockwise. Blade will cut peel away from apple, from bottom to top,
without further adjustment.
4. When apple is peeled, carefully remove from spikes.
5. Clean Blade and carefully replace Blade Cover.
changing blades
1. Put Blade Cover on Blade. Hook finger through loop at top of Blade and pull until
the Blade and Blade Cover release. Be wary of the Spikes.
2. Remove Blade Cover and safely dispose of old Blade. Put Cover on new Blade.
3. Slide Blade and Cover back onto peeler arm with Blade pointed downwards.
cleaning
1. Apple Peeler is nOt dishwasher safe. Clean only by hand with a soft cloth and mild
detergent.
07i
for technical questions, please call 1-800-444-3353.
SKU 96153
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
pArts And AsseMbly diAgrAM
part
description
Handle
part
description
Blade Cover
Main Unit
1
2
3
4
5
6
7
8
Knob
Retainer ring
Blade
Spikes
Crankshaft
1
8
4
7
6
5
3
2
tHe MAnufActurer And/Or distributOr HAs prOVided tHe pArts list And
AsseMbly diAgrAM in tHis MAnuAl As A reference AppliAnce Only. neitHer
tHeMAnufActurerOrdistributOrMAKesAnyrepresentAtiOnOrwArrAnty
Of Any Kind tO tHe buyer tHAt He Or sHe is quAlified tO MAKe Any repAirs
tO tHe prOduct, Or tHAt He Or sHe is quAlified tO replAce Any pArts Of
tHe prOduct. in fAct, tHe MAnufActurer And/Or distributOr expressly
stAtes tHAt All repAirs And pArts replAceMents sHOuld be undertAKen
by certified And licensed tecHniciAns, And nOt by tHe buyer. tHe buyer
AssuMes All risK And liAbility Arising Out Of His Or Her repAirs tO tHe
OriginAl prOduct Or replAceMent pArts tHeretO, Or Arising Out Of His
Or Her instAllAtiOn Of replAceMent pArts tHeretO.
record product’s serial number Here:
note: If product has no serial number, record month and year of purchase instead.
note: Some parts are listed and shown for illustration purposes only, and are not avail-
able individually as replacement parts.
for technical questions, please call 1-800-444-3353.
SKU 96153
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
|