Page1-2 stands for
TCO’99 model only.
Please see back label
for model distinction.
Congratulations!
You have just purchased a TCO'99 approved and labeled product!
Your choice has provided you with a product developed for
professional use. Your purchase has also contributed to reducing the
burden on the environment and also to the further development of
environmentally adapted electronics products.
Why do we have environmentally labeled computers?
In many countries, environmental labeling has become an established
method for encouraging the adaptation of goods and services to the
environment. The main problem, as far as computers and other
electronics equipment are concerned, is that environmentally harmful
substances are used both in the products and during their manufacture.
Since it is not so far possible to satisfactorily recycle the majority of
electronics equipment, most of these potentially damaging substances
sooner or later enter nature.
There are also other characteristics of a computer, such as energy
consumption levels, that are important from the viewpoints of both the
work (internal) and natural (external) environments. Since all methods
of electricity generation have a negative effect on the environment
(e.g. acidic and climate-influencing emissions, radioactive waste), it is
vital to save energy. Electronics equipment in offices is often left
running continuously and thereby consumes a lot of energy.
What does labeling involve?
This product meets the requirements for the TCO'99 scheme, which
provides for international and environmental labeling of personal
Download from Www.Somanuals.com. All Manuals Search And Download.
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Email (Internet): [email protected]
Current information regarding TCO'99 approved and labeled
products may also be obtained via the Internet, using the address:
Environmental requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires,
casings and housings. Their purpose is to prevent, or at least to delay
the spread of fire. Up to 30% of the plastic in a computer casing can
consist of flame retardant substances. Most flame retardants contain
bromine or chloride, and those flame retardants are chemically related
to another group of environmental toxins, PCBs. Both the flame
retardants containing bromine or chloride and the PCBs are suspected
of giving rise to severe health effects, including reproductive damage
in fish-eating birds and mammals, due to the bio-accumulative*
processes. Flame retardants have been found in human blood and
researchers fear that disturbances in foetus development may occur.
The relevant TCO'99 demand requires that plastic components
weighing more than 25 grams must not contain flame retardants with
organically bound bromine or chlorine. Flame retardants are allowed
in the printed circuit boards since no substitutes are available.
Cadmium
Cadmium is present in rechargeable batteries and in the
color-generating layers of certain computer displays. Cadmium
damages the nervous system and is toxic in high doses. The relevant
* Bio-accumulative is defined as substances which accumulate within living
organisms
Download from Www.Somanuals.com. All Manuals Search And Download.
TCO'99 requirement states that batteries, the color-generating layers
of display screens and the electrical or electronics components must
not contain any cadmium.
Mercury
Mercury is sometimes found in batteries, relays and switches. It
damages the nervous system and is toxic in high doses. The relevant
TCO'99 requirement states that batteries may not contain any mercury.
It also demands that mercury is not present in any of the electrical or
electronics components associated with the labeled unit.
CFCs (freons)
The relevant TCO'99 requirement states that neither CFCs nor HCFCs
may be used during the manufacture and assembly of the product.
CFCs (freons) are sometimes used for washing printed circuit boards.
CFCs break down ozone and thereby damage the ozone layer in the
stratosphere, causing increased reception on earth of ultraviolet light
with e.g. increased risks of skin cancer (malignant melanoma) as a
consequence.
Lead**
Lead can be found in picture tubes, display screens, solders and
capacitors. Lead damages the nervous system and in higher doses,
causes lead poisoning. The relevant TCO´99 requirement permits the
inclusion of lead since no replacement has yet been developed.
** Lead, Cadmium and Mercury are heavy metals which are
Bio-accumulative.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Instructions
Thank you for purchasing this monitor, a high-resolution multi-scan
color monitor.
Please read this guide thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This monitor has been tested and found compliant with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide proper protection against harmful
interference to a residential installation. This monitor generates, uses,
and can radiate radio frequency energy. Harmful interference to radio
communication may be led as a result if it‘s not properly installed and
used. However, there is no guarantee that interference will not occur
in a particular installation. If this monitor does cause serious
interference to radio or television reception, resetting the monitor may
determine it. Moreover, users are encouraged to correct interference
by doing one or more of the following:
ꢀReorient or relocate the receiving antenna.
ꢀMove the monitor and the receiver further away from each other.
ꢀConnect the monitor into an outlet on a circuit different from that
to which the receiver is connected.
ꢀConsult your local dealer or an qualified technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded
power supply cord and the provided shielded video interface cable
with bonded ferrite cores. Also, any unauthorized changes or
modifications to this monitor would void the user‘s authority to
operate this device.
Note: If necessary, shielded interface cables and AC power cord must
be used to meet the emission level limits.
EMI Certification
The Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulation.
Cet appareil numerique de class B respecte toutes les exigences du
Reglement sur le materiel brouilleur du Canada.
Download from Www.Somanuals.com. All Manuals Search And Download.
Content
Using OSD Functions..................................................................4
Technical Information ...............................................................13
Care and Maintenance ...............................................................14
Troubleshooting.........................................................................14
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
This monitor is manufactured and tested on a ground principle
that a user’s safety comes first. However, improper use or
installation may result danger to the monitor as well as to the
user. Carefully go over the following WARNINGS before
installation and keep this guide handy.
WARNINGS:
ꢁ This monitor should be operated only at the correct power
sources indicated on the label on the rear end of the monitor.
If you’re unsure of the power supply in your residence,
consult your local dealer or power company.
ꢁ Do not try to repair the monitor yourself as it contains no
user-serviceable parts. The monitor should only be repaired
by a qualified technician.
ꢁ Do not remove the monitor cabinet. There is high-voltage
parts inside that may cause electric shock to human bodies,
even when the power cord is disconnected .
ꢁ Stop using the monitor if the cabinet is damaged. Have it
checked by a service technician.
ꢁ Put your monitor only in a clean, dry environment. Unplug
the monitor immediately if gets wet and consult your
service technician.
ꢁ Always unplug the monitor before cleaning it. Clean the
cabinet with a clean, dry cloth. Apply non-ammonia based
cleaner onto the cloth, not directly onto the glass screen.
ꢁ Keep the monitor away from magnetic objects, motors, TV
sets, and transformer.
ꢁ Do not place heavy objects on the cable or power cord.
ꢁ For PLUG CABLE EQUIPMENT, the Socket-outlet shall
be installed near the equipment and shall be easily
accessible.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
First Setup
Congratulation for purchasing this monitor of high performance!
This monitor comes with the following accessories :
ꢂVideo cable with 15 pin D-SUB connector.
ꢂPower Cable.
ꢀAudio Cable.
ꢂUser guide book or CD-ROM.
Quick Installation
1. Connect video cable
Make sure both the monitor
and computer are powered
OFF. Connect the video cable
to the computer.
4. Windows users : Setting the
Timing Mode (Resolution and
Refresh Rate)
Example: 1280 x 1024 @ 60 Hz
Resolution Right-click on the
Windows desktop > Properties >
Settings > “Desktop Area”. Set
the resolution.
2. Connect power cord
Connect the power cord to a
properly grounded AC outlet,
then to the monitor.
Refresh Rate (vertical frequency)
See your graphic card’s user
guide for instructions.
3. Power-ON computer and
monitor
Power-ON the computer, then
Power-ON the monitor.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Using OSD Functions
1. Press the { button to display the main menu shown below.
2. Press the V or W button to scroll to the desired menu option.
3. Press the | button to select the menu option.
4. Press the V or W button to select submenu option.
5. After making adjustment, press { button to save changes and exit the
screen.
Main Menu
Auto Adjust：To auto adjust Horizontal Position, Vertical Position, phase
(Fine Tune) and Clock (H. Size) of the screen.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contrast : To adjust the foreground white level of screen image.
V : increase contrast, W: decrease contrast.
Brightness : To adjust the background black level of screen image.
V : increase brightness, W : decrease brightness.
Color Adjust : To provide four preset color adjustments for improving
brightness and color saturation: 9300K, 6500K, 5400K, and User Color.
Press button | to select the preset color.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
9300K--Adds blue to screen image for cooler white.
6500K--Adds red to screen image for warmer white and richer red.
5400K--Adds green to screen image for a darker color.
User Color : Individual adjustments for red (R), green (G), blue (B).
1. Press button | to select the desired color.
2. Press W or V button to adjust selected color.
Information : To display the information, regarding the current input
signal coming from the graphic card in your computer.
Note: See your graphic card user guide for more information about
changing the resolution and refresh rate.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Adjust : To manually adjust the Horizontal /Vertical position ,H.
Size, Fine Tune and Sharpness.
H./V. Position : To adjust the horizontal and vertical position of the video.
H. PositionV : move screen to the right, W : move screen to the left.
V. Position V : move screen up, W : move screen down.
H. Size : To adjust the width of the screen image.
W：decrease the width of screen image, V：increase the width of screen
image.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Fine Tune : To adjust the delay time of data and clock.
Press W or V to adjust to user preference.
Sharpness : To adjust the clarity of a non-SXGA (1280x1024) signal.
Press W or V button to adjust.
Setup Menu : To setting language Select, Resolution Notice, OSD
Position and OSD Time Out and Input Select (Analog).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Select : To allow the user to choose from available language.
Resolution Notice : There is a OSD message of "For best picture quality
change resolution to 1280 x 1024" displayed on the screen after 30 seconds
Powering ON or changing mode to lower resolutions (640 x 480/ 720 x 400
/ 800 x 600/ 1024 x 768), if the function was "enable". Above message
would not display on screen if it was "disable".
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Position : Press the † button to select the horizontal or vertical
OSD position.
Horizontal OSD Position：To horizontally replace the OSD position.
V：move OSD to the right, W：move OSD to the left.
Vertical OSD Position：To vertically replace the OSD position.
V：move OSD up, W：move OSD down.
OSD Time Out : Sets the length of time the Onscreen Display screen is
displayed before exiting.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Input Select : When press Input Select change Input signal to Analog or
Digital.
Memory Recall : To return to the factory setting condition, about
Picture＆Audio setting.
Press the button | to select the Memory Recall menu option.
Audio Menu:
Volume: To adjust the volume of speaker output.
Mute: To select the Mute ON/OFF.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Supporting Timing modes
VGA
720 x 400 @ 70Hz
640 x 480 @ 60Hz
640 x 480 @ 67Hz
640 x 480 @ 75Hz
800 x 600 @ 56Hz
800 x 600 @ 60Hz
800 x 600 @ 72Hz
800 x 600 @ 75Hz
832 x 624 @ 75Hz
1024 x 768 @ 60Hz
1024 x 768 @ 70Hz
1024 x 768 @ 75Hz
1280 x 1024 @ 60Hz
1280 x 1024 @ 75Hz
VGA
MAC
VESA
VESA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
VESA
VESA
Warning : Do not set the graphic card in your computer to exceed
these maximum refresh rates. Doing so may result in permanent
damage to your monitor.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Information
Technical Specification
LCD Panel
19.0” TFT
Power Management
Energy Star compliant VESA
DPMS compatible
< 2 W
Displayable Resolution
Pixel Dimension
LCD Display Color
Viewing Angle
Tilt
SXGA 1280 x 1024 max. Vertical Frequency 75Hz max.
0.294 x 0.294 mm
16.2M (6 bits+FRC/color)
140/130, CR>10
0°~20°
Contrast Ratio
Brightness
500 : 1 (typical)
250 cd /m2 (typical)
Response Time
Active Display Area
Temperature
12 ms.
378 mm x 303 mm
Operating: 0°C ~ +40°C
Storage: -20°C ~ + 60°C
Compliance
Power
BSMI, CE, FCC-B, Energy Star
Input Voltage
AC100-240 V
Speaker
1W x 2
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Maintenance
Care
ꢀ Avoid exposing your monitor directly to sunlight or other heat source. Place
your monitor away from the sun to reduce glare.
ꢀ Put your monitor in a well ventilated area. Do not place any heavy things
on top of your monitor.
ꢀ Make certain your monitor is installed in a clean and moisture-free area.
ꢀ Keep your monitor away from magnets, motors, transformers, speakers,
and TV sets.
Note:
1.
Move the LCD out of the package and take off the plastic bag and
Polystyrene Foam.
2.
3.
Pull the base from Parallel versus Panel to Vertical.
Adjust the Panel within 0 degree leaning forward and 20 degree leaning
backward. You must bend harder to exceed 20 degree backward but this
range is for packing the unit to a small size for storage only. Caution:
Panel exceeding 0 to 20 degree could cause the unit unstable and the
harm will be unpredictable.
Safety Tips:
ꢀ If smoke, abnormal noise or odor came out from your monitor, caution you
should remove the power cord immediately and call your service center.
ꢀ Never remove the rear cover of your monitor cabinet. The display unit inside
contains high-voltage parts and may cause electric shock to human bodies.
ꢀ
Never try to repair your monitor yourself. Always call your service center or
a qualified technician to fix it.
Troubleshooting
No power
ꢀ
Make sure A/C power cord is securely connected to the power adapter and
the power supply is firmly connected to the monitor.
Plug another electrical device into the power outlet to verify that the outlet is
supplying proper voltage.
ꢀ
ꢀ Make sure all signal cables are installed.
Power on but no screen image
ꢀ
Make sure the video cable supplied with the monitor is tightly secured to the
video output port on back of the computer. If not, tightly secure it.
ꢀ Adjust brightness.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Wrong or abnormal colors
ꢀ
If any colors (red, green, blue) are missing, check the video cable to make
sure it is securely connected. Loose or broken pins in the cable connector
could cause an improper connection.
ꢀ
Connect the monitor to another computer.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
|