Mini magical child
XQBM30-22
Computerized Automatic
Washing Machine
Mini magical child,having
large capacity,can wash
two towel quilt
Contents
Before using
Names of the parts.............the 2nd cover
Safety precautions .......................1
Introduction of the special functions.........3
Installation and adjustment ..................3
Install the water inlet hose............5
Using process
Preparation
before washing .............7
Put in the laundries .........................8
Add the detergent .......................9
Use the operation buttons ................10
Close the top lid ..................... 14
Washing finished ............................14
Disposal after washing ....................15
Trouble shooting Answer to question.....16
Packing list After-sales service .......................17
Specification Circuit diagram.....the back cover
Please read this manual carefully before use.
Please retain it attentively for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Safety precautions
Be sure to use three-phase power receptacle.
Ensure that the earth terminal of the power
receptacle is earthed reliably.
Be sure to pull the plug off when the
machine is idle or when cleaning the
machine.
If the power line is bad, to avoid risk it is required to have it replaced by the technicians
of our special shop or our agent or the after-sale service department. Keep the pin of
the power plug clean.
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Do not use water hotter than 50
In case the washing machine is installed
on ground with carpet, do not block the
ventilation hole with carpet.
Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.
The ventilation holes
at the bottom
soft items
Do not let the machine share one receptacle
with other electric appliances. If the power
plug is damaged, or the plugging into the
receptacle is loose, do not use the plug any
more.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Do not decompose, repair or alter the
machine by yourself.
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
er
Petrol
inn
Th
The handicapped or children without
care shall not use the machine.
Keep the machine away from direct
sunlight and heat source like the heater.
Please keep the lint filter in good condition,
and install it to proper position. If the lint
filter is lost or damaged, please contact
the local after-sales service department of
our company.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Introduction of the special functions
Hand-wash type wash:
The inner tub and pulsator rotate to opposite
directions during washing to form current like the
hand-wash moving. At the same time the washing
effect is improved significantly because the wall of the
inner tub also acts in washing.
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
Install the bottom plate
Back
After you open the package, please lean
the washing machine gently down on soft
items ( like the towel cloth, blanket, etc. ).
Install the bottom plate to the bottom of
the machine with the eight screws by
a cross screwdriver, then lift the machine
up gently. See to the figure:
Front
Bottom plate
Screw soft items
Adjust the installation position
The largest allowed slope of the shank base of the machine is 2 . The slanting or
rough ground will result in unstable running or stoppage of the machine. Please
adjust it with following methods:
Confirm it's horizontal:
Hang the lead line to confirm if it is horizontal.
Adjust the adjustable foot:
1.To twist the adjustable foot, please first
lift up the side of the foot slightly, loosen
adjustable nut
Loosen
Fasten
the adjustable nut, and twist the foot.
2.Fasten the nut after adjustment.
adjustable foot
High
Low
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
How to change the direction of the drain hose
1.Lean the machine down gently with the front
surface facing the ground. Loosen the eight
screws by a cross screwdriver.
3.Extend the drain hose from the left side. Push the
drain hose into the groove with hands.
Bottom plate
Back
Push the drain hose
into the groove with
hands at this point
Front
Soft item
2.Pull out the drain hose from the groove at the
right side.
4.Install the bottom plate (as per indicated before),
then lift the machine up gently.
Use groove at
this side after
direction changing
Page 3
Usage of the drain hose
The drain hose shall drain smoothly
1.The height of the drain hose shall be
less than 10cm, or the drainage will not
be smooth, and cost such long time that
the machine may stop at mid way.
4.If extra drain hose is needed, please
make separate purchase. The inner
diameter of the extra hose shall not
less than 30mm, and the length shall
not exceed 1.5m.
2.Do not ramp or press the drain hose.
If the extra hose is too long, cut it
either at A or at B point.
If the drain hose is too long, cut it at mid
point. To make smooth drainage, cut the
front end of the hose slantingly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Install the water inlet hose
Confirm the water faucet
Water faucet,not suitable
Water faucet,suitable
Outlet end surface
>10mm
It is required that the front end shall be longer than 10cm.
The outlet end surface of the faucet shall be flat and smooth. If not please file it
to avoid leakage.
Connection between the water inlet hose jointer and
the water faucet
1.Press the lower end of the lock lever and push down the slider. Take off the water inlet
hose jointer from the water inlet hose component. See to Figure 1.
2.Loosen the screw till the water faucet can be accessed. Put the jointer of the water
inlet hose on the faucet. See to Figure 2. (If the faucet is too large and the jointer can
not be set on the water faucet, please loosen the four screws and take out the
bushing in the jointer. See to the figure.)
Water inlet pipe jointer
Screw
Slider
Mark label
Screwdriver
Liner
Locking lever
Water inlet pipe
Figure 1
Figure 2
Figure 3
3.Fasten the four screws evenly. See to Figure 4.
4.Take off the nameplate. Twist the fastening nut as per the indication of the figure to
seal up the outlet end surface of the faucet. See to Figure 5.
Remarks: Before installation, the threading is 4mm above the upper surface of
the nut. After installation, the threading is 2mm above the upper surface of the
nut. See to Figure 6.
About 4mm before twisting
About below 2mm after twisting
Nut
Figure 4
Figure 5
Figure 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Connection between the water inlet hose and the
washing machine
1.Do not take off the water absorption
cushion. Please check if the cushion
is dropped or damaged before each
usage. If it happens please contact
our after-sale department immediately.
2.Put the nut of the water inlet hose on
the valve jointer.
Nut of the water inlet hose
3.Fasten the nut. Swing it gently to
confirm if it's suitable.
Water absorption cushion
Jointer of the water inlet valve
Connection between the jointer of the water inlet
hose and the water inlet hose
1.Push down the slider. Insert the
Jointer of the
water inlet hose
water inlet hose into the jointer.
2.Hang the lock lever to the jointer.
Release the slider till a click
sound is heard.
Slider
Locking lever
Check the connection between the jointer of the
water inlet hose and the water faucet
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if
the connection between the jointer
of the water inlet hose and the water
faucet, and the installation of the
water inlet hose are firm, so as to
prevent dropping from improper
Installation position.
Dismantle the water inlet hose
1.Close the water faucet.
2.Press the locking lever. Push down the slider. Then
pull of the water inlet hose. If the machine is used
more than once every week, the jointer of the water
inlet hose can be kept on the faucet to prevent
damaging the fixing screw.
Locking lever
Slider
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
1 Preparation before washing
Preparation before washing
1.Connect the water inlet hose.
2.Confirm that the washing machine is
earthed reliably . Then insert the power
plug into the receptacle. Do not connect
the earth terminal to the gas pipe and
tap water pipe.
3.Put down the drain hose.
Pay attention to followings before washing the laundries
Confirm
if
Clear the pocket. Fasten the
The quantity of
When the pulsator
there's special Take out the
requirment for coins , sand,
the laundries. hairpins etc.
buttons and
zippers.
the laundries is running , the
shall not exceed buttons of the
the rated value. laundries may
The big laundries cause noise. For
like the jeans
shall be put in
loosely.
t h e s a k e o f
discretion,please
put the laundries
with buttons into
other laundries.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
2 Put in the laundries
The capacity of washing and spinning of the
machine refer to the largest weight of the standard
laundries under dry condition (as per the laundries
stipulated in the A2 Attachment of GB4288-1992
standard) that can be washed or spinned in one
time. One time washing quantity shall be lower than
the rated capacity. The largest capacity of this
machine is 3.0kg.
The thickness, size, type of the cloth will influence
the actual washing capacity. It is suitable for one
time washing to put in reasonable amount of
laundries and the laundries can be turned round in
washing.
Do not select "High" water level for laundries small
than 0.8kg, so as to avoid splashing of water.
To wash thin laundries like the stocking, silk etc.,
please first put them into washing bag (which can
be purchased separately) before wash.
Reference weight of the laundries:
working suit up,down
cotton,about 1120g
jeans about 800g
blanket
cotton,about 900g
blending coat
about 800g
pajamas
jacket
cotton,about
800g
shirt
cotton,about
300g
single bed sheet
cotton,about 600g
undershirt
cotton,about 180g
socking
blending,about 50g
underpants
cotton,about 70g
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
3 Add the detergent
How to use the washing
powder
Direct dissolved in the machine
1.Fill water to "Low" water level.
2.Add the power. Run for 30 seconds
to dissolve it completely.
3.Put in the laundries. Select
suitable water level.
The instant dissolving of the washing
powder:
How touse thewhitener
1.Prepare warm water of 30 and a
container.
2.Add the powder while stirring to
fully dissolve it.
The powder is more prone to pollute
the laundries than the detergent.
Therefore please use it with proper
quantity.
It is suggested not to use high
sudsing detergent.
Fill water to decided level. Dilute
the whitener with container. Pour
it slowly into the washing tub.
Avoid using whitener on
laundries with color or pattern as
they are prone to lose color.
The whitener shall not touch the
laundries directly.
Refer to the user's manual for
the usage and quantity of the
whitener.
For powder whitener, please
dissolve it before use.
Different washing powders have
different dosage. Please refer to the
usage manual of the washing powder
for the details.
Standard usage quantity of the detergent and water
quantity
Common powder
Concentrated
powder
(Add 25g in each
30L water)
Laundries
quantity(kg)
Water level Water quantity
(Add 40g in each
30L water)
High
Medium
Low
About 33L
About 22L
About 14L
About 40g
About 30g
About 16g
About 25g
About 18g
About 10g
1.5~3.0
0.8~1.5
Below 0.8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
4 Use the operation buttons
a. Description of the function of the buttons
Mode and meaning of the indicator light
Flashing: indicate the running program
On: indicate the program about to run, or
indicate the selected mode
Flashing rapidly: indicate abnormal condition
R
PROCEDURE
SELECTION
QUICK
TWICE
WASH
WASH
Procedure selection
One or more out of the five procedure
programs are available for your option:
quick, twice wash, wash, rinse, spin
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
"Start/Pause"button
"Power On/Off"button
After the power is switched on,
push it to start the machine
Push the "On/Off" button to
switch on the power.
During working, push it to
pause working.
When the power is on, push it
again to switch off the power.
During pause, push it to
resume working.
POWER
ON/OFF
START
PAUSE
SPIN
RINSE
"Water level select"button
Select or adjust the water level
Description
High
1.Push the power button to switch on the
power. If the machine is idle for 10 minutes,
the power will be switched off automatically.
2.In usage, please first push the "power
switch" button, then push the "procedure
selection" button. After selection, adjust the
water level. Finally push the "start/pause"
button to start the machine.
Middle
Reset
Water level
select
Low
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
b.
Steps of using the operation buttons
and description of the steps
R
POWER
ON/OFF
AS
PROCEDURE
SELECTION
START
PAUSE
QUICK
SPIN
TWICE
WASH
RINSE
WASH
High
Middle
Reset
Water level
switch
Low
1 Push the "Power On/Off" button to switch on the
power
POWER
ON/OFF
2 Push the "Procedure selection" button to select
the suitable procedure program
PROCEDURE
ON
SELECTI
After switching on the power, the machine will set to standard program
automatically including "wash-rinse-spin". To select other program, push the
"Procedure selection" button to select one or more programs among "quick wash"
"twice wash" "wash" "rinse" "spin". After the washing machine starts running
program, if you need to change the procedure, please switch off the power and
restart the washing machine to make new selection. Refer to the "Procedure
selection method" for the selection.
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
Attention
Even there's no water in the tub, the
spinning will start after a certain period.
Do not use the "twice wash" program for
the woolen laundries.
Wash the laundries that are prone to lose
colors separately from other laundries.
The pulsator will not rotate unless the
water is filled to selected water level.
Selection method of the procedure programs
Times of pushing
the "procedure
selection" button
Selected procedure
program
Contents (the lighted indicators indicate
the programs about to run)
Applicable procedure
Twice
wash
Quick
wash
When the common laundries
need washing, rinsing and
spinning
Wash
Wash
rinse
rinse
spin
spin
Wash, rinse, spin
(standard program)
Twice
wash
Quick
wash
Wash (the washing
liquid remains in the tub)
Repeat using the washing liquid
Repeat using the washing liquid
Twice
wash
Quick
wash
Wash
Wash
rinse
rinse
spin
spin
Wash, rinse (the rinsing
liquid remains in the tub)
Twice
wash
Quick
wash
When the laundries need rinsing
and spinning after manual
washing
Rinse, spin
Twice
wash
When the laundries need only
spinning after manual washing
(first drain then spin)
Quick
wash
Wash
Wash
rinse
rinse
spin
spin
Spin (spin after drain)
Twice
wash
Quick
wash
If the laundries are very dirty, or
the sleeve and collar are dirty,
first soak then wash
Twice wash, wash, rinse,
spin
Twice
wash
Quick
wash
Wash
rinse
spin
Quick wash, wash, rinse,
spin
When quickly wash the light
dirty laundries
If you push the "Procedure selection" button for 7 times, it will resume the original
mode, and it will circulate like that.
If you select the "Quick wash" program, you have to set the full procedure of wash,
rinse and spin. The procedure can not be selected.
Time list of each program (minute)
Wash (min)
Rinse (min/time)
Spin (min) Total time (min)
Program
Standard
Soak (min)
Rinse twice with stored
water, about 6
About 8~15
About 4
About 4
About 4
About 35~42
About 68~82
About 21~25
Rinse twice with stored
water, about 6
About 25 About 16~30
About 5~9
Twice wash
Quick
Rinse once with stored
water, about 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
Total time: including the normal water inlet time, drain time, excluding the power off time. The total washing
time may be influenced by the water inlet pressure and water level.
Spin time: the time from intermittent running to finishing
When selecting "twice wash" program, first soak for about 20 minutes, pre-wash for about 8 minutes, then
soak for about 5 minutes, then do washing, rinsing and spinning. The wash time in the list includes the pre-
wash time.
When selecting "quick" program,wash,rinse and spin are set automatically,no procedure select can be done
further
3 Adjust the "water level selection" knob to select
suitable water level
Three water levels available according to the laundries quantity: High; Medium;
Low.
Page 9
After the water inlet as per the preset water level, in case additional water
quantity is required, please first set the button to the "Add water", push and hold
it to perform automatic water inlet. When it reaches the suitable water level, you
can turn it to the needed water level.
After the water inlet under set water level, if higher water level is needed, please
first turn the knob to "Add water", then turn back to needed water level. The
washing machine will fill water to the new water level.
4 Press the "Start/Pause" button
START
PAUSE
5 Close the top lid 6Washing finished
It beeps to
indicate the
finishing of
washing
When the washing is finished, the three
indicators of "wash" "rinse" "spin" are
all on. The power will be switched off
will stop working except for water
automatically about 10 minutes after
filling and spinning
the finishing of the washing
If you open the top lid, the machine
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
7 Disposal after washing
After using, please clean the lint and foreign materials of the lint filter etc. in time.
Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Clean the lint filter
When washing,lint filter must be used
After using,please clean it in time
1 Demount the lint filter
Put your hand on the proper position
and demount it by pushing it down(see
to figure 1)
Figure 1
2 Clean the lint
When the lint is wet,put the lint filter
under the water and clean it (see to
figure 2)
3 Fix the lint filter
Figure 2
After cleanning,put the downside of the
lint filter into the filter cover,then fix it
by pushing the upside in (see to figure 3)
Figure 3
If the cabinet is dirty, wipe it with wet cloth
The filter screen of the water inlet
valve is likely to be blocked by
foreign materials and influence the
water inlet. Please clean it with
brush every two months.
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol
etc.
1.After washing, close the water faucet. (If needed, you can dismantle the water
inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water
completely after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
Wipe off the water drops on the surface of the machine and inside the tub. Open
the top lid for some time (about 1 hour), then close the top lid.
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble-shooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending it to
repair. If there are real breakdowns, please come to the special maintenance department or
after-sale service department of our company. Do not repair it by yourself.
Phenomena
The reason
How to settle
In wash/rinse/spin, the machine
stops running. (The "wash" "rinse"
"spin" indicator flashquickly)
The top lid is not closed
Close the top lid
Put down the drain hose. Open
and close the top lid once.
Clean the foreign material.
Open and close the top lid once.
Is the drain hose put down?
The draining doesnot work, orthe speed
of draining istoo slow (theindicators of
"wash" "rinse" flash)
Is the drain hose blocked by
foreign material?
Re-order the laundries. Close
the top lid.
Level the machine in right
position. Open and close the
top lid once.
The safety switch acts. The
spinning can not work (the
indicators of "wash" "rinse" flash
quickly)
Are the laundriesput slantingly?
Is the machine slanting?
Open the waterfaucet. Push
the "Start/Pause" button.
Clean the water inlet valve.
Push the "Start/Pause" button.
Wait for the normal water
pressure before use.
The water faucet is not open
The program pauses after about 8
minutes of water inlet (the
indicators of "wash""spin" flash
quickly)
The water inlet valve is blocked
The water pressure is too low
and thecurrent istoo small
Is there power failure?
Is the power plug loose?
Use it when the power is on.
Insert the power plug tightly.
The machine doesnot act
Is the machine slanting?
Level the machine properly.
Re-order the laundries.
There's abnormal sound inside the
machine
Are the laundries slanting in
spinning?
Is the jointer screw of the water
inlet hose is loose or twisted
awry?
Fasten the jointer screw
properly.
The water faucetleaks
Common phenomena
Phenomena
Explanation
The spinning is intermittent when it starts.
Balance the laundries to avoid slanting.
Push the "Procedure selection" button to
select "Spin", but it doesn't work.
The program is setting the drain time. Some
time is needed before it starts spinning.
There may be some water flowing out of the
drain hose in the first use of the machine.
It is the water remained in the factory
inspection of performance.
It is because that the laundries are slanting
to one side, and the safety switch acts. After
water inlet and stirring, the slanting will be
removed and the spinning will work.
In the final spinning, it stops and displays
"Rinse", and starts water inlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Packing list
Name
Quantity
Storage position
Inside the document bag
User's manual
One
One
One
Certificate of qualification
Inside the document bag
Inside the document bag
Inside the document bag
Post card
Certificate of warranty
One
Components of the water
inlet hose
Inside the accessory bag
One
Between the upper cushion of the washing machine
package and the upper seal of the package carton
Bottom plate
One
Inside the accessory bag
Tapping screws ST4x16
Eight
Computerized Automatic
washing machine
One
After-sales service
Honorable users:
Thank you for using Haier series washing machine. We will offer you following services according
to the stipulation in the Act on Protection of Consumers' Rights and Interests by evidences of your
Guarantee certificate and invoice:
1.Three years' guarantee for the whole machine on our account.
2.The following cases are not included in above guarantee:(1) Those damaged by improper
transportation, handling, using and maintenance by users.(2) Those decomposed by self.(3) Those
with altered invoice or without invoice and guarantee certificate.(4) Those damaged by outer
reasons such as abnormal voltage, fire, etc.(5) Those not used according to the operating handbook
and the notice on the labels of the machine cabinet.(6) Those used outside family (such as public
machines, those used for business purpose, those used as accessories of automobiles and ships,
etc.).
If you meet any difficulty in use please call the local after-sales service department according to
the certificate of warranty. We will offer sincere services for you.
Remarks:
1.Future changes on the structure and technical data of this model are not to be informed to the
users.
2.If extra water inlet hose and drain hose are needed, following components are available for
purchase:
(1) water inlet hose (0.5m, 1m) (2) drain hose (3) washing bag
Headquarter of the after-sale service center: 87, Ningxia Road, Qingdao, China
P.C. 266022
Service Tel
0532 8939999 Fax
0532 5847239
Local after-sales service center: Please call the local after-sales service according
to the certificate of warranty.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
Executive standard: GB/T4288-1992 Household Electric Washing Machine
Model
XQBM30-22
220V~ 50Hz
Rated voltage frequency
3.0kg (weight of standard dry cloth)
Rated washing / spinning capacity
High/33L, Medium/22L, Low/14L
About 90L (High water level; Standard program)
0.03Mpa-0.78Mpa
Water level/Water quantity (about)
Max water consumption
Injection pressure
220W
Rated washing power
Rated spinning power
Weight
200W
About 19.5kg
Dimension
L 447mm W 438mm H 760mm
Circuit Diagram
wiring diagram
The coil L is used to protect the circuit. Please do not take it off.
Pink
Brown
Water level
Pink
switch
Purple
Yellow
Blue
Gray
Puller
Blue
Water inlet
valve
Red
Red
Red/White
Red/White
Blue
Safety
switch
Yellow/green
White
Blue
Motor
Blue
Haier Group Haier International Electric Appliances Co., Ltd.
Address: Haier Park, Haier Road, Qingdao Hi-tech Industrial District, Qingdao, China
P.C.: 266101 Tel:(0532)8938887
Fax:(0532)8938881
The 1nd Edition, June 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
|