DWE-3120A
Computerized Full-auto
Washing Machine
Contents
Before using
Names of the parts..........................The 2nd cover
Safety precautions...............................................1
Ins Tallation and adjustment.................................3
Install the water inlet hose....................................5
Using Process
Preparation before washing.................................7
Put in the laundries..............................................8
Usage of the detergent........................................9
Use the operation buttons.................................10
Close the top lid................................................14
Finish washing..................................................14
Disposal after washing......................................15
Trouble shooting*answer to question................16
Packing list................................................17
Please read this manual carefully before using.
Retain it for future reference
Please check if the power receptacle has good earthing
condition before using to guarantee your safety.
The manufacturer will not bear the responsibility for
those risks occurred from not obeying this manual.
Specification table
The back cover
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Safety precautions
In normal usage of thewashing machine,
Please plug the power plug on special
receptacle. Be sure to use three-pins
power receptacle. Ensure that the earthing
prong of the power receptacle is earthed
reliably. Use leakage protector if possible.
the power plug shall be ready to be pulled
or plugged with hand. Be sure to pull the
plug off and close the water faucet in
following cases: power failure, delivering
the machine, setting the machine idle or
cleaning the machine. Do not plug
or pull the power plug with wet hand.
Earth
Do not bend, stretch, twist, bind the power cord by force,
or reform it. Do not press or clamp it with heavy items. If the
power cord and power plug are bad, or the receptacle is loose,
be sure to have it replaced by the technicians of ourspecial shop
or our agent, or the after-sales service department for the sake
of avoiding any risk. Keep the prong of the power plug clean.
If dust is found on the power plug, please wipe it off with dry cloth.
Do not use water hotter than 50 C .
Do not put the machine at damp place like
the bathroom. Never wash it with water.
In case the washing machine is installed on ground with
carpet, do not block the ventilation hole with carpet.
Do not wash water-proof laundries like the raincoat,
bike covers etc. to avoid abnormal vibrations in spinning.
The ventilation
holes at the bottom
Soft object
Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the
plugging into the receptacle is loose, do not use the plug any more.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Safety precautions
Do not decompose, repair or alter the machine
by yourself.
Do not stretch hands into the working machine.
It is dangerous even if the rotation is slow.
Take special care of the children.
Do not put any hot or heavy items (such as the kettle
with hot water) on the washing machine
Do not wash laundries with volatile materials
(such as thinner, petrol etc.).
Benzene
Keep the machine away from direct sunlight and
heat source like the heater.
The handicapped or children without care shall not
use the machine.
The lint filter shall be kept in good condition, and
installed to proper position. If the lint filter is lost
or damaged, please contact the local after-sales
service department of our company.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Install the lint filter
After opening the package, please take out the
lint filter from the document bag and install it
into the Filter frame of the inner tub. See to the right Figure.
Filter frame
Lint filter
Adjust the Installation position
The largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will result in
unstable running or stoppage of the machine. Please adjust it with following methods:
Confirm it's horizontal
Hang the plumb to confirm it's horizontal
Confirm it's horizontal:
Air bubble
If the bulb of the level meter at the balance display
position is inside the standard circle, it indicates that
the machine is horizontal. Otherwise you need to
adjust the adjustable leg of the machine.
Suitable
Not suitable
Standard circle
Adjust the adjustable foot
(1) To twist the adjustable foot at the right front of
the cabinet (front the sight of front), please first
lift up the side of the foot slightly, loosen the
adjustable nut, and twist the foot.
adjustable nut
adjustable foot
Loosen
Fasten
(2) Fasten the nut after adjustment.
High
Low
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
How to change the direction of the drain hose
1.Lean the machine down gently withthe front
surface facing the ground.
3.Extend the drain hose from the left side. Push the
drain hose into the groove with hands.
Back
Front
Soft item
2.Pull out the drain hose from the groove at the left side.
Use groove at
this side after
direction changing
Usage of the drain hose
The drain hose shall drain smoothly
1.The height of the drain hose shall be
less than 10cm, or the drainage will not
be smooth, and cost such long time that
the machine may stop at mid way.
4.If extra drain hose is needed, please
make separate purchase. The inner
diameter of the extra hose shall not
less than 30mm, and the length shall
not exceed 1.5m.
2.Do not ramp or press the drain hose.
3.If the drain hose is too long, cut it at mid
point. To make smooth drainage, cut the
front end of the hose slantingly.
5.If the extra hose is too long, cut it
either at A or at B point.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Install the water inlet hose
Confirm the water faucet
water faucet, suitable
water faucet, not suitable
The exit end face of the faucet
It is required that the front end shall be longer than 10mm.
The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage.
Connection between the water inlet hose jointer and the water faucet
1.Press the lower end of the lock lever and push down the slider. Take off the water inlet hose jointer from the
water inlet hose component. See to Figure 1.
2 Loosen the screw till the water faucet can be accessed. Put the jointer of the water inlet hose on the faucet.
See to Figure 2. (If the faucet is too large and the jointer can not be set on the water faucet, please loosen
the four screws and take out the bushing in the jointer. The front end of the faucet must be smooth, otherwise
it may leak water. See to Figure 3.)
water inlet hose jointer
Screw
Slider
Nameplate
Bushing
Lock level
Screw knife
water inlet hose
Figure 1
Figure 2
Figure 3
3.Fasten the four screws evenly. See to Figure 4.
4 Take off the nameplate. Twist the fastening nut as per the indication of the figure
to seal up the exit end face of the faucet. See to Figure 5.
Remark: .Before twisting the fastening nut, the threading is 4mm above the upper
surface of the nut. After twisting, the threading is less than 2mm above the upper
surface of the nut. See to Figure 6
about 4mm after twisting
About above 2mm after twisting
Screw nut
Figure 4
Figure 5
Figure 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Connection between the water inlet hose and the washer
1.Do not take off the water absorption cushion. Please check if the
cushion is dropped or damaged before each usage. If it happens
please contact our after-sale department immediately.
nut of the waterinlet hose
2 Put the nut of the water inlet hose on the valve jointer.
3 Fasten the nut. Swing it gently to confirm if it's suitable.
water absorption cushion.
jointer of the waterinlet valve
Connection between the jointer of the water inlet hose
and the water inlet hose
1.Push down the slider. Insert the water inlet hose into the jointer.
the jointer of the water inlet hose
Slider
2 Hang the lock lever to the jointer. Release the slider till a click sound is heard.
Locking level
Check the connection between the jointer of the water inlet hose
and the water faucet
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
Dismantle the water inlet hose
1. Close the water faucet.
2. Press the locking lever. Push down the slider.Then pull of the water inlet hose.
If the machine is used frequently, the jointer of the water inlet hose can be kept
on the faucet to prevent damaging the fixing screw.
Locking level
Slider
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
1 Preparation before washing
Preparation before washing
1.Connect the water inlet hose. Open the water faucet.
2.Confirm that the washing machine is earthed reliably.
Then insert the power plug into the receptacle. The
earth terminal shall not link to gas pipeline and
faucet water pipeline.
3.Put down the drain hose.
Pay attention to following before washing
Check
if C l e a r t h e Tie the long The quantity of
When the pulsator
Pay attention to followings before washing the laundries
the laundries pocket. Take strips; fasten the laundries is running , the
has special out the coins, the buttons; shall not be too buttons of the
requirement sand, hairpins close zippers. large. Stretch laundries may
on washing etc.
and loosen the cause noise. For
laundries before t h e s a k e o f
putting them in discretion, please
the tub.
put the laundries
with buttons into
other laundries.
a. Check if the laundries are applicable for washing with machine.
b. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust.
For the parts with heavy soil, please apply detergent on them in advance, which
can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before
putting in.
f. Do not put those laundries polluted by chemicals into the washing machine directly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
2 Put in the laundries
The capacity of washing and spinning of the machine
refer to the largest weight of the standard laundries
under dry condition that can be washed or spinning
in one time. One time washing quantity shall be lower
than the rated capacity. The largest capacity of this
machine is 12.0kg.
The thickness, size, type of the cloth will influence the
actual washing capacity. It is suitable for one time
washing to put in reasonable amount of laundries
and the laundries can be turned round in washing.
Do not select above 8 water level for laundries small
than 2.0kg, so as to avoid splashing of water.
Reference weight of the laundries:
working suit up,down
cotton,about 1120g
jeans about 800g
blanket
cotton,about 900g
blending coat
about 800g
pajamas
about 200g
jacket
cotton,about
800g
shirt
cotton,about
300g
single bed sheet
cotton,about 600g
undershirt
cotton,about 180g
socking
blending,about 50g
underpants
cotton,about 70g
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
3 Usage of the detergent
First turn the detergent box down before adding detergent.
Add the concentrated composite washing powder into the box
directly as indicated in the left figure.
Inlet of the concentrated synthetic detergent
See to following table for the dosage of the washing powder.
How to use the washing powder
Direct dissolved in the machine(not applicable for fuzzy
and reserve programs)
1.Fill small quantity of water.
2.Add the power. Run for 30 seconds to dissolve
it completely.
3.Put in the laundries. Select suitable water level.
How to use the whitener
The instant dissolving of the washing powder:
1. Prepare warm water of 30 and a container.
2. Add the powder while stirring to fully dissolve it.
Fill water to decided level .Dilute the whitener with
container. Pour it slowly into the washing tub.
Please according to the water level , water quantity and
laundries quantity to select powder quantity properly.
Avoid using whitener on laundries with colour or
pattern as they are prone to lose colour.
It is suggested not to use high sudsing detergent.
The whitener shall not touch the laundries directly.
Washing power with poor quality or not used for a long
period may get blocked. Please clean the detergent box
in time.
Refer to the user's manual for the usage and
quantity of the whitener.
For powder whitener, please dissolve it before use.
Water level , water quantity and selection of powder
Laundries
quantity
(kg)
Common powder,
Concentrated powder,
Add 25g in each 30L water
Water
quantity
Water
level
Add 40g in each 30L water
12
11
10
9
About 96L
About 89L
About 83L
About 77L
About 71L
About 65L
About 59L
About 53L
About 47L
About 41L
About 35L
About 29L
About 129g
About 119g
About 111g
About 103g
About 95g
About 87g
About 79g
About 71g
About 63g
About 55g
About 47g
About 39g
About 80g
About 74g
About 69g
About 64g
About 59g
About 54g
About 49g
About 44g
About 39g
About 34g
About 29g
About 24g
High
8
Medium
Low
7
6
5
4
3
2
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
4 Use the operation knobsand buttons
Description of the function of the knobs and buttons
Mode and meaning of the VFD indicator
The frame of indicator is not lighted.
the frame of the indicator is flashing : indicate the running program.
the frame of the indicator is on : indicate the program about to run,
or indicate the selected mode
the frame of the indicator is flashing rapidly: indicate abnormal condition.
Digital tube
During working , it displays the remained
reserve time (minute).
During reserve, it displays the remained
reserve time (hour)
In case of trouble, it displays the abnormal
symbol(see to page 16)
HWM120-01
WATER
LEVEL
RESERVE
RESERVE button
During operation, thedigital tube will display
the remained time before finishing in minute.
Push the reserve button. The digital tube will
display the reserve time for finishing of washing
in hour. The indicator will flash to indicate that
the reserve function is working.
WATER LEVEL button
You need to select the water level by yourself.
If you put in wet laundries, you need to select
suitable water level manually. Refer to
water level water quantity and
Page 9
selection of powder in page 9.
In selecting the quick wash program, the waterlevel is set to 2
automatically. When the 2 is reached, it will do washing while
filling water. When 4 is reached, it will perform normal washing.
Due to thevariable cloth and humidity, the set waterlevel may be
different from the actual waterlevel. Sometimes it may perform
water adding.
During washing, push the water level knob to add water.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
POWER ON/OFF button
PROCESS button
Push the "On/Off" button to switch on the power.
one or more one programs among
soak wash rinse spin
can be selected.
When the power is on, push it again to switch off
the power.
After the power is switched on , if the washing machine is idle
for 10 minutes, it will switch off the power automatically.
POWER
ON/OFF
PROGRAM
PROCESS
START
PAUSE
PROGRAM button
The following four programs are available.
Standard Common washing
Jeans
Gentle
Quick
Washing large , thicker ,
or heavily soiled laundries
Programs
Washing woolen textile
or underwear
START/PAUSE button
15-minute quick wash for the
laundries with under 3 kg
After the power is switched on, push it to start the machine
During working, push it to pause working.
During pause, push it to resume working.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
Steps of using the operation buttons and description
of the steps
POWER
HWM120-01
ON/OFF
WATER
LEVEL
PROGRAM
RESERVE
PROCESS
START
PAUSE
POWER
ON/OFF
Push the POWER ON/OFF button to switch on the power.
Push the PROGRAM button to select the suitable automatic program.
PROGRAM
After switching on the power, the machine will set to standard program automatically. To select other program, push the
PROGRAM button till the corresponding indicator is on. Refer tothe PROGRAM button in Page 11.
Page 11
For an example: select quick wash for the quick washing of the laundries with light dirt.
Push PROCESS button to select suitable procedure
PROCESS
After switching on the power, the machine will set to WASH-RINSE-SPIN program automatically. That is the most
common program. To select other program, push the PROCESS button to select one or more procedures
among SOAK WASH RINSE SPIN .
Page 9
Refer to the PROCESS METHOD for the selection.
Attention
Even there's no water in the tub, the
spinning will start after a certain period.
Do not use the SOAK program
for the woolen laundries.
Wash the laundries that are prone to lose colors
separately from other laundries.
while washing soft laundries such as silk stockings and textile ,
please put into a wash net which can get by shoppong.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
Selection method of the procedure programs
Times of pushing
the PROCESS
button
Contents (the lighted indicators
indicate the programs about to run)
Selected procedure
program
Applicable procedure
Wash, rinse, spin
(standard program)
When the common laundries need
washing , rinsing and spinning
Soak
Soak
Soak
Soak
Soak
Soak
Wash
Wash
Wash
Wash
Wash
Wash
Rinse
Rinse
Rinse
Rinse
Rinse
Rinse
Spin
Spin
Spin
Spin
Spin
Spin
Wash (the washing liquid
remains in the tub)
Repeat using the washing liquid
Repeat using the rinsing liquid
Wash (the rinsing liquid
remains in the tub)
When the laundries need rinsing and
spinning after hand washing
Rinse, spin
When the laundries only need spinning
after hand washing(first spin then drain)
Spin
(spin after drain)
If the laundries are very dirty, or the sleeve
and collar are dirty, first soak then wash
soak wash, rinse, spin
If you push the PROCESS button for 6 times, it will resume the initial mode, and it will circulate in that way.
The soak program can be used as fitting of the standard/jeans automatic programs.
It will do soaking with intermittent stirring of pulsator.
After the washing machine starts working, you can only make selection during wash , and cannot make selection
during other procedures.
WATER
Push the WATER LEVEL button to selection suitable water level
LEVEL
When the power is switched on, you need to set the suitablewater level by yourself.
Refer to the water level water quantity and selection of powder in Page 9
and water level in Page 10 for the selection.
Page 9
Page10
Time list of each program (minute)
Program
water level
1~12
Wash (min)
10~15
Rinse (min/time)
Spin (min)
Total time (min)
40~53
Rinse twice , each about 4
About 6
About 6
About 2
About 2
Standard
Jeans
Rinse with water inlet twice,
each about 4
10~15
40~54
1~12
Gentle
Rinse twice , each about 4
Rinse once , each about 2
About 3
About 3
About 24
About 15
1~12
Quick
About 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
* Total time: including the normal water filling time, drain time.
* Spin time: the time from intermittent running to finishing.
* The normal and jeans automatic programs can be fitted with soak procedure selection. After water inlet,
it will first soak for 15-45 minutes, then do washing, rinsing and spinning.
* If quick procedure is selected, the machine will set the complete washing program of water level, wash, rinse, spin automatically.
Push the RESERVE button to select the suitable reserve program
RESERVE
When the power is switch on, the RESERVE program is disabled automatically. If you need to finish the washing in reserved time,
please push the reserve button to select suitable program.Refer to the RESERVE button in Page 10.
Minute Remained
Page10
Confirm the reserve program
Hour reserved
When the reserve program is started, the digital tube will display
the finishing time of the reserve washing.
The washing will finish about 18 hours later.
To change the running program or cancel reserve, you shall
switch off the power and make new selection.
The water inlet pressure and water level can influence the finishing time of washing.
Push the START/PAUSE button
START
PAUSE
5 close the lid
6 finish washing
After Finishing wash
alarm automatically
Excluding during soak, wash, filling water procerdure,If you open
the top lid, the machine will stop working and alarm before spinning.
When the washing is finished, the power
will be switched off automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
Disposal after washing
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Clean the detergent box, then set it on
the control panel seat
The lint filter must be used during washing.
It must be cleaned in time after each using
Lint filter:
1. Pull it up to dismantle.
2. Clean the filter screen after washing.
3. Push it down to install.
Dismantle
Install
Clean
The filter screen of the water inlet valve is likely to be
blocked by foreign materials and influence the water inlet.
Please clean it with brush every two months.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc.
inner
Petrol
Th
Alcohol
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour),
then close the top lid.
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble-shooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes.
Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department
or after-sale service department of our company. Do not repair it by yourself.
Phenomenan
The reason
How to settle
After the reserve is started, it rings and the
digital tube displays E0
The top lid is not closed.
Close the top lid.
*
*
The draining does not work ,or the speed of
draining is too slow. The digital tube displays
E1 and it rings.
Is the drain hose put down?
Put down the drain hose.
*
*
*
*
Open and close the top lid once.
Clean the foreign material .
Open and close the top lid once.
Is the drain hose blocked by
foreign material?
It stops running during spin .the digital
tube displays E2 and it rings.
The top lid is not closed.
Close the top lid.
*
*
Are the laundries put slantingly?
Is the machine slanting?
Re-order the laundries. Close the top lid.
The safety switch acts. The spinning
can not work (after twice revising)
The digital tube shows E3 and it rings.
*
*
*
*
Level the machine in right position.
Open and close the top lid once.
It does not do water inlet or the speed
is slow ( the water level is not reached
after15 minutes). The digital tube
displays E4 and it rings.
Is the water faucet open or is there water
supply failure?
Open the water faucet.
Open and close the top lid once.
*
*
*
*
Is the water inlet valve blocked.
Clean the water inlet valve .
Open and close the top lid once.
Is there power failure?
Is the power plug loose?
Use it when the power is on.
Insert the power plug tightly.
the machine does not act .
(The indicators are off.)
*
*
*
*
*
*
Is the machine slanting?
Is there metal material inside the
washing machine?
Level the machine properly.
*
*
Fasten the fastener or zip up the zip.
There's abnormal sound inside
the machine.
Are the laundries slanting in spinning?
Re-order the laundries. Close the top lid.
Fasten the jointer screw properly.
*
*
*
*
Is the jointer screw of the water inlet
hose loose or twisted awry?
The water faucet leaks.
Common phenomena
Phenomena
Explanation
Balance the laundries to avoid slanting.
The spinning is intermittent when it starts.
The program is setting the drain time. Some time is needed
before it starts spinning.
Push the PROCESS button to select SPIN, but it doesn't work.
It is to avoid splashing during water inlet.
The pulsator pauses during water inlet in wash and rinse.
There may be some water flowing out of the drain hose in the first
use of the machine.
It is the water remained in the factory inspection of performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
Packing list
Lint filter
Components of the water inlet hose
Computerized Automatic
washing machine
One
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
Model
HWM120-01
Rated voltage frequency
Rated washing / spinning capacity
Water level/Water quantity (about)
220V ~ 50Hz
12.0kg
1/29L 2/35L 3/41L 4/47L 5/53L 6/59L
7/65L 8/71L 9/77L 10/83L 11/89L 12/96L
Max water consumption
Water Injection pressure
Rated washing input power
Rated spinning input power
Weight
About 280L (Highest water level; Standard program)
0.03MPa~0.78MPa
450W
380W
About 60kg
Overall dimension
L 660 mm W 660mm H 1050 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
|