COLOR TV RECEIVER
OWNER'S MANUAL
The Owner`s Manual for the Follow Models:
D29FV6-A, D29FV6, D34FV6-A, D34FV6
Please READ this manual carefully
before operating the unit, and keep
it for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Cautions
1. When you clean the TV set, please 4. Do not place the TV set near rain or
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
moisture as it may cause an electric
shock, or the TV set to catch fire. The
TV set must only
be used in dry in
door locations.
2. In order to prolong the using life of
the TV set, please place it in a well
ventilated location.
5. The back cover must only be
removed by a registered electrical
service person. Removing the back
cover may result in electric shock, fire
or damage to
the TV set.
6. If the TV set is not going to be used
for a long time, or there is a severe
thunder & Lighting storm, it is
recommended that the TV set be
disconnected from the AC power outlet
and the aerial plug removed.
3. Don't place the
TV set in direct
sunlight or near a
heat source.
Explanation on the display tube
Should the picture tube require cleaning, disconnect the power and use a dry
soft cotton cloth. Do not use any cleanser or abrasive cloths.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Antenna connection
General speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
300 twin-lead cable
Antenna adapter
(additional purchase)
Mixer
additional
purchase
75 coaxial cable
Antenna input
75 standard
coaxial type
Plug
(additional purchase)
AC power socket
* the plug type may vary
depending on the model.
Note
It is recommended that you'd better use 75 coaxial cable to remove the
disturbance caused by airwave.
Don't bind antenna cable and electric wire together.
Preparation for the remote control
Battery installation
Take off the battery compartment cover. Place two AAbatteries, make sure that battery
polarity matches with the +/- mark inside the battery compartment.
Operation notes for the remote control unit
Under normal conditions, the life time of batteries is one year.
If you don't intend to use the unit for a long period or the electricity of the batteries is
used up, remove the batteries to prevent batteries acid from leaking into the battery
compartment.
Never place batteries in a fire.
Avoid dropping the remote control and/or getting it wet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Position of Buttons and Plug-ins
Front and Side panel
Side AV terminal
D29FV6 , D34FV6 Model
Channel position up/down
Volume up/ down
Infrared receiver
TV/Video
MENU
(input selector
Power indicator Power switch
Back panel
D29FV6 Model
D34FV6 Model
DVI input terminal
Antenna input
VGA input terminal
DVI input terminal
Antenna input
VGA input terminal
AV output terminals
DVI IN
DVI IN
AV output terminals
S-video input terminal
HDTV input terminals
AV2 input terminals
AV1 input terminals
S-video input terminal
AV2 input terminals
AV1 input terminals
HDTV input terminals
DVD component terminals
DVD component terminals
S-video input terminal: Special video S-VIDEO AUDIO: L/MONO Track L/MONO ,R Track
AV output terminals: VIDEO AUDIO L/MONO Track L/MONO ,R Track
R
R
AV2 input terminals MONITOR : VIDEO AUDIO :L/MONO Track L/MONO ,R Track
Av1 input terminals MONITOR :VIDEO AUDIO :L/MONO Track L/MONO ,R Track
DVD component terminals:
R
R
Interleaved signal
Progressive signal
Y
Cb Cr AUDIO L/MONO Track L/MONO ,R Track
Pb Pr AUDIO L/MONO Track L/MONO ,R Track
R
R
Y
HDTV input terminals: Y Pb Pr terminal AUDIO L/MONO Track L/MONO ,R Track
R
1.When the S-video terminal and the Video 1 terminals are connected
at the same time, the S-video terminal is preferential.
2.When the side AV is connected, please select the Video 2 terminal.
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Buttons of the Remote Control
Function buttons of the remote control
Mute button
TV/AV
••••
To eliminate the sound of the programs
DC standby and power button
TV and AV exchange button
A changeover betweenTV and other
input signals like AV
I/II select button
SNAPSHOT
DV
SCAN
CALL
DV button
Screen call button
Snapshot button
Program scan button
Direct select button
Select a TV channel directly
Digital selection button
Changeover from one digital, two
digital and three digital
Program swap button
Picture mode selection button
Sound mode selection button
Volume adjustment button
Program adjustment button
Menu call/select button
Select menu, call and exit
(No available)
SWAP
S.STD
P.STD
CH+
MENU
CH-
VOL-
VOL+
H.LOCK
Hotel lock
(No available)
(No available)
PICTRURE SOUND
TIME
FUNCTION
EXIT
(No available)
(No available)
TUNE
DIGITAL
ZOOM
Picture menu
Function menu
Sound menu
Time menu
Tune menu
Exit /Calendar
Digital menu
Zoom
Download from Www.Somanuals.com. All Manuals Search And Download.
The Screen Display Menu
For your convenienceof operation, herelists the screendisplay menus ofthis model
as your reference.
Sound menu
Picture menu
PIC.
Brightness 50
Treble
50
50
50
SOU.
Contrast
Color
50
50
Bass
Balance
Sound Effect
Surround
Sharpness 50
Hue
Color Temp.
0
0
ON
Function menu
Tuning menu
Language English
Color Sys. Auto
Prog. Sort
Prog NO.
Skip
008
OFF
B/G
Sound Sys.
Current Prog.
To Prog.
2
Amusement
TUN.
Fine Tune
FUN.
20
Special
Search
Exchange
RGB Sound
Auto Search
Time menu
Digital menu
TIME
Digital Bass On
Digital Scan
DV Play
Clock
18:18
On Time
On Prog.
Off Time
Sleep
--:--
---
Comb Filter On
SVM
DIG. DNR
On
Off
--:--
000
Remind Time --:--
Remind Prog. ---
H.lock menu
Lock Menu
Note:
New PW.
....
When the TV set ispowered on, theremight be
different from what have beenillustrated above.
Please do someadjustment as follows to meet your
needs.
Tuning Lock OFF
Preset Prog OFF
Video Lock
Child Lock
OFF
OFF
1. Press theMENU button toselect the menuin
the main menu:PICTURE, SOUND, TUNING,
FUNCTION and DIGITAL. Of course, you may
select these menusdirectly by pressingthe
Max Volume 100
Unlock
PICTURE, SOUND, TUNE ,FUNCTION andDIGITALbuttons on theremote control.
2. If youneed adjust thenumerical value ofthe TIME and H.LOCK menu, press the
TIME and H.LOCKbutton on theremote control tocall the menu.
3. Press theCH+/- buttons toselect the desireditem, press theVOL-/+buttons to
adjust the numericalvalue.
4. If itis in sub-menu, press the VOL+button to enterthe sub-menu. Then press
the CH+/- toselect the desireditem, press theVOL-/+buttons to adjust the numerical
value. Afterthat, press theMENU button twiceto return themain menu.
5. If youwant exit themenu, press theMENU button repetitiouslyor Exit button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch on/ off the TV set
In the following, the methods of using power switch and remote control to switch on/off
power supply for the TV set will be explained.
Switch on/ off the TV set
Switch on/ off the TV set
1.Connect the power supply wire. Then press the power
Infrared receiver
switch button, the power indicator will light, in several
seconds the picture will display on the screen.
2. If the TV is in the state of standby, press the POWER
button or the CH+/- buttons on the remote control.
Power indicator Power switch
Note:
1. Press the P+/- buttons which is on the TV set to get
Channel position up/down
Volume up/ down
out of the standby state when the remote control is not
in use.
MENU
3
B/G
144MHz
NORMAL
TV/Video
(input selector
POWER
2. Press the POWER button onthe remote control
to the standbymode.
3. Press the power button onthe TV set to
completely power off the TV.
4. To eliminate themagnetization completely, the
TV set degaussesautomatically. There is the
sound ofPENG, itis natural.
Automatic stand by function
When the SCREEN SAVER is ON, If no signal has
been received, and after five minutes, it will stand by
automatically. If the SLEEP has been used, the SLEEP
function is priority. When the SCREEN SAVER is OFF,
the Automatic stand by function is no available.
When it is AV status, the TV set will enter the screen
saver, after 5 minutes turn to stand by automatically .
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV Programs
Watching TV programs
How to select the TV program
Select the desired program
1. Use thedirect number selectionbutton
Press the button from 0-9 to select a one-figure channel.
If you want to select a double figures channel, press the
figure-selection button and change it into two-figure mode, then
press the number of the channel.
If you want to select a three figures channel, press the figure-selection
button and change it into three-figure mode, then press the number
of the channel.
2. Use the CH+/- buttons
Press the CH+ button to select the channel of the larger number.
Press the CH- button to select the channel of the smaller number.
CH+
MENU
CH-
TIP: When the channel is stored, then the program number
is yellow. When the channel is empty, then the program
number is red.
VOL-
VOL+
Select the desired sound
Press the VOL+/- buttons to adjust the volume to your need.
If the colour or sound of a certain channel is
abnormal
If the TV set youbought is
abnormal in colouror sound ina
certain channel, itmight be
because the colouror sound
FUNCTION
Language English
Color Sys. Auto
Prog. Sort
system has beenset improperly.
You may follow theinstruction
Amusement
FUN.
Special
RGB Sound
below to adjustit. Press the
FUNCTION button, andyou can
see the form.
If the colourof the pictureis abnormal
Press the CH+/- buttons to move the indicator to "Color Sys.", and
press the VOL+/- buttons to select the proper colour.
CH+
MENU
CH-
If the soundis abnormal
VOL-
VOL+
Press the CH+/- buttons to move
the indicator to "Sound Sys.", and
press the VOL+/- buttons to select
the proper sound. (If the TV set you
bought had multi-system, then D/K,
M, B/G and I will appear alternately.)
Prog NO.
Skip
008
OFF
B/G
Sound Sys.
Fine Tune
Search
TUN.
Auto Search
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV Programs (continued)
Swap function enables quick swap to the last watched program.
Auto scan function enables automatic successive scanning of the programs in memory
with "OFF" skip status (There are 12 pictures display on the screen at the same time).
Program swap and auto scan functions
Program swap
1. Suppose the channel number
you used just now is 8 and the
18
B/G
144MHz
NORMAL
channel number you are using
is 18 (as shown in the figure).
SWAP
8
B/G
144MHz
NORMAL
2. If you want to return to the
last watched program channel
8, you can simply press the
SWAP button.
18
B/G
144MHz
NORMAL
3. If you want to return to
channel 18, press the button
again. Through this function,
you can easily change
between the channel you are
using and the channel you
used last time.
Auto program scan
SCAN
1. Press the SCAN button to
scan through all the memorized
TV channels. The TV set screen
displays 12 pictures at the same
time. Press the S.STD button to
scan next page, and press the
P.STD to scan last page.
CH+
2.Press the CH+/- buttons and
MENU
CH-
VOL-
VOL+
VOL-/+ buttons to select the
program that you desired, and
press the MENU button to
confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning
The TV set has three methods to set the channels, which are Auto search, Search and Fine tune.
In this section, how to use the remote control to set the channel is explained. You can also use the buttons
on the TV set to set channel.
Auto Search
Select the search mode
1. Press the FUNCTION button, the
FUNCTION
function menu will appear on the
screen.
Language English
Color Sys. Auto
Prog. Sort
Search Mode Ordinal
Amusement
Curtain Mode
Screen Saver
Tilt
Off
Off
0
FUN.
Special
2. Press the CH+/- buttons to move
the indicator to "Special ", then
RGB Sound
CH+
MENU
CH-
press the VOL+ button to sub-menu.
VOL-
VOL+
. Press the CH+/- buttons to move
the indicator to "
",
then press the VOL+ button to
select the desired auto search mode.
Auto search
1. Press the TUNE button, the tuning
menu will appear on the screen.
( For example, the auto search mode I.)
TUNE
Prog NO.
Skip
008
OFF
B/G
Sound Sys.
TUN.
Fine Tune
Search
2. Press the CH+/- buttons to move
the indicator to " Auto Search " .
Auto Search
3. Press the VOL+ button, and
"Auto Search" mode I will work.
The TV set will search
Prog NO.
008
Skip
OFF
B/G
CH+
MENU
CH-
Sound Sys.
Fine Tune
Search
TUN.
automatically all available programs,
after search is finished, all available
programs will be stored in turn.
Auto Search Natrual 001
125.00MHz
Auto Search
VOL-
VOL+
If you wantto stop thesearch,
just press theMENU button.
The order ofthe automatic searchis due tothe frequency of
the program, generallyspeaking, it isused only thefirst time
you search theprogram, and afterthe order ofthe program
has been made, you don't haveto use thisfunction,
otherwise the orderof the programwill be mixed.
TIP: To eliminate the reorder for misapplying, you can set the
"Tuning Lock" of the Lock Menu to ON after the order of the
program. (Refer to the page 33)
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning (Continued)
Search
After searching (Continued)
Press the CH+/- buttons to check channels.
If the colour or sound is abnormal in a certain channel, it may be
because that the colour or sound system has not been set
properly, then, you may adjust it to proper system (Refer to
page 8).
CH+
MENU
CH-
VOL-
VOL+
Search
1. Press the CH+/- buttons or Direct
1
B/G
144MHz
NORMAL
select button to select the desired
channel number.
TUNE
2. Press the TUNE button, the tuning
menu will appear on the screen.
( For example, the auto search mode I.)
CH+
MENU
CH-
VOL-
VOL+
. Press the CH+/- buttons to
move the indicator to "Search".
Prog NO.
Skip
008
OFF
B/G
Sound Sys.
Fine Tune
Search
TUN.
Auto Search
CH+
MENU
CH-
VOL-
VOL+
4. Press the VOL+ or VOL- buttons,
the TV set will begin to search up or
down, when the TV set has searched
a program, the TV set will stop
searching. If the program is not the
one you need, you can press the
button again, let the TV set continue
to search until it has searched the TV
signal you need.
Prog NO.
008
Skip
OFF
B/G
Sound Sys.
Fine Tune
Search
TUN.
Search
001
Auto Search
125.00MHz
CALL
Note:
Usually, five seconds after the channel has been changed, the channel
number will disappear automatically. If you want to know which channel
you are watching, just press the CALL button once.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning (Continued)
Fine Tune
Fine Tune
If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless reception
is poor.
1. Press the CH+/- buttons or Direct
CH+
MENU
CH-
1
B/G
144MHz
NORMAL
select button to select the desired
channel number. ( For example, the
VOL-
VOL+
channel 1.)
TUNE
2. Press the TUNE button, the tuning
menu will appear on the screen.
3. Press the CH+/- buttons to
Prog NO.
Skip
008
OFF
B/G
move the indicator to " Fine Tune ".
Sound Sys.
Fine Tune
Search
TUN.
CH+
MENU
CH-
Auto Search
VOL-
VOL+
4. Press the VOL+ button to enter
the Fine Tune Menu, and then the
VOL- button to search downwards
or the VOL+ button to search
upwards until it has searched the
TV signal you need.
Prog NO.
008
Skip
OFF
B/G
Sound Sys.
Fine Tune
Search
TUN.
Auto Search
Fine Tune 001
125.00MHz
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning (Continued)
Skip unnecessary channel
Skip unnecessary channel
The Program skip feature enables you to skip/hide
programs that you do notwish to be displayed when
using the CH+/- buttons. These channels will still be
displayed by directly using the channel number
buttons on the remote control.
CH+
1. Press the CH+/- buttons or Direct
1
B/G
144MHz
NORMAL
select button to select the desired
MENU
VOL-
VOL+
channel number. ( For example, the
channel 1.)
CH-
TUNE
2. Press the TUNE button, the tuning
menu will appear on the screen.
Prog NO.
Skip
008
OFF
B/G
Sound Sys.
Fine Tune
Search
TUN.
Auto Search
. Press the CH+/- buttons to
move the indicator to "Skip OFF ".
CH+
MENU
CH-
. Press the VOL-/+ buttons to
turn the Skip function to "ON ".
Prog NO.
Skip
008
On
VOL-
VOL+
Sound Sys.
Fine Tune
Search
B/G
TUN.
Auto Search
. Press the TUNE button to exit
the menu.
If you want to recover the skipped channel
1. Use the Channel Selection buttons to select the number of the
channel to be recovered.
2. Repeat those steps just now.
3. Press the VOL+/- buttons to turn the SKIP function OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning (Continued)
Exchange Programs
Exchange Programs
This feature enables TV programmes that may be on a wrong program
number to be moved to another number.
This feature is very useful when Automatic Search Tuning has been used
because programmes are stored in the order they are found, which is usually
not the desired order.
FUNCTION
When organising, it is best to start from the lowest programme number first.
1. Press the TUNE button, the tuning
menu will appear on the screen, then
Language English
Color Sys. Auto
press the CH- button continuously to
Prog. Sort
Amusement
CH+
MENU
CH-
turn the next page menu.
FUN.
Special
RGB Sound
VOL-
VOL+
2. Press the VOL-/+ buttons to set
the Current Prog, then the TV set
will turn to the channel 6.
Language English
Color Sys. Auto
CH+
MENU
CH-
Prog. Sort
. Press the CH+/- buttons to
Current Prog.
To Prog.
6
Amusement
Special
FUN.
20
move the indicator to " To Prog ".
Exchange
RGB Sound
VOL-
VOL+
4. Press the VOL-/+ buttons to set
the To Prog to 9.
CH+
MENU
CH-
Language English
Color Sys. Auto
Prog. Sort
. Press the CH+/- buttons to
move the indicator to " Exchange ".
Current Prog. 006
Amusement
FUN.
To Prog.
009
Special
Exchange
RGB Sound
VOL-
VOL+
6. Press the VOL-/+ buttons to confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Picture and Sound Controls
Select the picture modes and set the picture quality
How to select the picture modes
You can quickly select the desired picture
mode from four preset modes and one
customized mode.
NORMAL
SOFT
P.STD
Press the P.STD button to select the desired
picture quality. Five kinds of picture modes
(i.e., " NORMAL","SOFT" ,"PIC MUTE",
"PERSONAL","BRIGHT", ) can be selected
in turn.
PIC MUTE
PERSONAL
BRIGHT
MODE
PICTURE QUALITY
Medium color and brightness
Low color and brightness
Set by yourself
NORMAL
SOFT
PERSONAL
PIC MUTE
BRIGHT
(No pictures)
Bright color
Set the picture quality
1. Press the PICTURE button, the
Picture menu will appear on the
screen.
PICTRURE
PIC.
Brightness 50
. Press the CH+/- buttons to
Contrast
Color
50
50
move the indicator to the desired
option (For example, Contrast), then
press VOL-/+ buttons to set the
desired quality. Press the PICTURE
button to exit the Picture menu.
Sharpness 50
Hue
Color Temp.
0
0
CH+
MENU
CH-
VOL-
VOL+
Option
Press VOL+ button
Press VOL- button
Brightness
Contrast
Dark
Weak
Light
Soft
Bright
Strong
Thick
Sharp
Cold
Color
Sharpness
Color Temp.
Warm
Tip: HUE option is available only in N color system.
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Picture and Sound Controls (Continued)
Select the sound modes and set the sound quality
How to select the sound modes
You can quickly select the desired sound
mode from four preset modes and one
THEATER
S.STD
customized mode.
Press the S.STD button to select the desired
PERSONAL
picture quality. Five kinds of sound modes
MUSIC
(i.e., "THEATER" ,"PERSONAL","MUSIC",
NORMAL
" NORMAL"," SPEECH", ) can be selected
in turn.
SPEECH
S o u n d q u a l i t y
Suitable for rich and full music
You can set it by yourself
Musical
M o d e
THEATER
PERSONAL
MUSIC
NORMAL
SPEECH
Standard
Speech
SOUND
Set the sound quality
1. Press the SOUND button, the
Sound menu will appear on the
screen.
Treble
50
50
50
SOU.
Bass
Balance
Sound Effect
Surround
. Press the CH+/- buttons to
move the indicator to the desired
option (For example, Bass), then
press VOL-/+ buttons to set the
desired quality. Press the SOUND
button to exit the Sound menu.
ON
CH+
MENU
CH-
VOL-
VOL+
Option
Treble
Bass
Press VOL- button Press VOL+ button
Weak
Strong
Weak
Strong
Balance
R track down
L track down
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Picture and Sound Controls (Continued)
Surround effect chip has beenemployed to forma vivid andreal space surroundsound
effect.
Sound Effect, Surround and Mute functions
Sound Effect function
SOUND
There are Stereo, V.SRS and MONO sound effect for the
TV set. You may select the desired option.
1. Press the SOUND button, the
Sound menu will appear on the
Treble
50
50
50
screen.
SOU.
Bass
Balance
Sound Effect
Surround
. Press the CH+/- buttons to move
the indicator to "Sound Effect".
. Press the VOL+ button to
sub-menu.
Stereo
V.SRS
Mono
CH+
MENU
CH-
ON
VOL-
VOL+
. Press the CH+/- buttons to select
the desired option, then the sound effect of the TV set turn to the
sound effect selected. Press MENU button to exit the sub-menu.
Surround Function
SOUND
1. Press the SOUND button, the
Sound menu will appear on the
screen.
Treble
50
50
50
SOU.
Bass
. Press the CH+/- buttons to move
the indicator to " Surround ".
Balance
Sound Effect
Surround
ON
CH+
MENU
CH-
. Press the VOL-/+ buttons to turn
the " Surround " function ON.
VOL-
VOL+
How to use the Mute function
When you want to listen to the sound nearby, or when you are
answering the telephone, or talking with your friends, you may use
the mute function.
1. Press the MUTE button once, a
sign of mute will appear on the
screen, and then the sound will be
eliminated to half; press the MUTE
button again the sound will be
eliminated completely .
2. Press thevolume button or
press the MUTEbutton again,
and the soundwill be recovered.
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Set Up Function
This model has time set function such as On/Off Time, Sleep and Remind Time, etc.
When the Child Lock is working, On Time and Remind Time function cannot be used.
Clock and On/Off Time functions
Set clock
When this functionis used, pleasefirst check whetherthe
clock is inaccordance with yourlocal time; ifnot, you can
follow the instructionsto adjust it.
TIME
1. Press the TIME button, the Time
menu will appear on the screen.
TIME
. Press the CH+/- buttons to move
Clock
18:18
--:--
---
On Time
On Prog.
Off Time
Sleep
the indicator to " Clock ", then press
the VOL-/+ buttons to adjust.
Tips:
--:--
0
CH+
MENU
CH-
Remind Time --:--
Remind Prog. ---
If the VOL+/-buttons is not
released, the timewill change
in ten minutes.
VOL-
VOL+
If the VOL+/-buttons is pressedand released, thetime will
change in oneminute.
On/Off Time function
The TV set can bepowered on/off at a presettime and itcan
start with aprogram you havepreset.
Here take OnTime functionfor example. The Off Time function
is same withit.
TIME
1. Press the TIME button, the Time
TIME
menu will appear on the screen.
Clock
18:18
18:00
---
On Time
On Prog.
Off Time
Sleep
. Press the CH+/- buttons to move
the indicator to " Clock ", then press
the VOL-/+ buttons to adjust (For
example, 18:00).
--:--
000
Remind Time --:--
Remind Prog. ---
CH+
MENU
CH-
. Press the CH+/- buttons to move
the indicator to " On Prog. ", then
press the VOL-/+ buttons to adjust
(For example, 8).
VOL-
VOL+
TIME
Clock
18:18
18:00
008
On Time
On Prog.
Off Time
Sleep
--:--
000
Remind Time --:--
Remind Prog. ---
Note:
This function willonly be
available when theTV set
is in themode of standby.
4. Repeat step 1-2 to turn OFF
TIME.(take 23:00 as an example)
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Set Up Function(continued)
Sleep and Remind Prog. Functions
Sleep function
The TV set have 18 sections option for sleep timer function
(each section has a time interval of 10 minutes).
TIME
1. Press the TIME button, the
TIME
Time menu will appear on the
Clock
18:18
18:00
008
screen.
On Time
On Prog.
. Press the CH+/- buttons to move
Off Time
--:--
the indicator to " Sleep ", then press
Sleep
120
CH+
Remind Time --:--
Remind Prog. 001
the VOL-/+ buttons to adjust.
MENU
CH-
VOL-
VOL+
. Press the VOL-/+ buttons to adjust.
Remind Prog. Function
With Remind Prog. function, the TV set can automatically
change a preset program in a preset time .
TIME
1. Press the TIME button, the
Time menu will appear on the
screen.
TIME
Clock
18:18
18:00
008
. Press the CH+/- buttons to move
the indicator to " Remind Time ",
then press the VOL-/+ buttons to
adjust (For example, 19:00).
On Time
On Prog.
Off Time
Sleep
--:--
120
Remind Time 19:00
Remind Prog. 001
CH+
MENU
CH-
VOL-
VOL+
TIME
. Press the CH+/- buttons to move
the indicator to " Remind Prog. ",
then press the VOL-/+ buttons to
adjust (For example, 18).
Clock
18:18
18:00
008
On Time
On Prog.
Off Time
Sleep
--:--
120
Remind Time 19:00
Remind Prog. 018
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Function
Screen Saver function and Select the menu Language
How to start screen saver function
The SCREEN SAVER including " Moving ", " DV Play " and " Off ".
The " Moving " function is moving screen saver. The " DV Play "
is snatching in 3 interval. If no signal has been received, and
after fifteen minutes, it will stand byautomatically.
1. Press the FUNCTION button,
FUNCTION
the Function menu will appear on
Language English
Color Sys. Auto
the screen.
Prog. Sort
Amusement
FUN.
Special
RGB Sound
CH+
. Press the CH+/- buttons to move
the indicator to " Special ", then
Language English
Color Sys. Auto
MENU
press the VOL+ button to sub-menu.
VOL-
VOL+
Prog. Sort
Search Mode Ordinal
Amusement
Curtain Mode
Screen Saver
Tilt
Off
Off
0
FUN.
Special
RGB Sound
CH-
. Press the CH+/- buttons to move
the indicator to " Screen Saver ",
then press the VOL-/+ buttons to
adjust.
How to select the menu Language
FUNCTION
You may choose Chineseor English.
1. Press the FUNCTION button,
the Function menu will appear on
Language English
Color Sys. Auto
Prog. Sort
the screen.
Amusement
Special
FUN.
RGB Sound
CH+
MENU
CH-
. Press the CH+/- buttons to move
the indicator to " Language ", then
press the VOL+ button to select the
desired language, then the OSD
language of the TV set turn to the
OSD language selected.
VOL-
VOL+
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Function(continued)
Select Switch on mode
Select Switch on mode
There are some kind of Switch on mode, such as CURTAIN, OFF,
FADE OUT , etc. You can choose one you need.
FUNCTION
1. Press the FUNCTION button,
the Function menu will appear on
Language English
Color Sys. Auto
Prog. Sort
the screen.
Search Mode Ordinal
Amusement
Special
Curtain Mode
Screen Saver
Tilt
Off
Off
0
FUN.
. Press the CH+/- buttons to move
the indicator to " Special ".
RGB Sound
CH+
. Press the VOL+ button to
sub-menu.
MENU
VOL-
VOL+
. Press the CH+/- buttons to move the indicator to " Curtain Mode ",
then press the VOL+ button to select the desired Switch on mode.
CH-
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Function(continued)
Digital Scan function and SVM (Super Velocity Modulation) function
Digital Scan function
The Digital Scan includes Pixes Plus,PixesScan,100Hz,
50P, etc.
The TV set will recover 100Hz after powering off.
DIGITAL
1. Press the DIGITAL button,
Digital Bass On
Digital Scan
the DIGITAL menu will appear on
the screen.
DV Play
Comb Filter On
Pix Plus
SVM
DNR
On
Off
Pix Scan
100Hz
50P
DIG.
. Press the CH+/- buttons to move
the indicator to " Digital Scan ".
CH+
MENU
CH-
. Press the VOL+ button to
VOL-
VOL+
sub-menu, and then press VOL-/+ buttons set the desired scan .
Press the VOL-/+buttons to confirm.
. Press the MENU button to exit the sub-menu.
SVM function
1. Press the DIGITAL button,
DIGITAL
the DIGITAL menu will appear on
Digital Bass On
Digital Scan
the screen.
DV Play
Comb Filter On
SVM
DNR
On
Off
DIG.
. Press the CH+/- buttons to move
the indicator to " SVM ".
CH+
MENU
CH-
. Press the VOL-/+ buttons to turn
the function ON.
VOL-
VOL+
Digital Bass On
Digital Scan
DV Play
Comb Filter On
SVM
DNR
On
Off
DIG.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Function(continued)
The pictures by DV recorder and Snapshot functions are be saved temporarily.After
powering off or switching off the pictures will be cleared away.
DV Recorder, Snapshot function and Screen Display
DV Recorder function
1. On the TV,AV,S-VIDEO,YCbCr status,press the DV button
to startup the DV function,at the
DV
same time the screen display
" Recording " .
2. Press the DV button again to
stop the DV function,and then
go on playing.
Recording
Note:
The TV set will exit the recorder
status automatically to play the
TV program after the Memory full.
Snapshot function
1. On the TV,AV,S-VIDEO,YCbCr
status,press the SNAPSHOT
SNAPSHOT
3/8
button to still the current picture,
at the same time the screen
Menu Save
Other Cancel
display " DV STILL " and the
tips.
2. Press the MENU button to
save the pictures,and press
other button to play the program.
DV STILL
3. When press the MENU button, the screen display
" 3/8 OK " after saving.
Note:
The 3/8 show that the capacity total is 8 , and 3 is
used.
Screen Display
Press the CALL button to display the currnet channel
number, system ect.
Press the CALL button again to
exit the screen display.
CALL
3
B/G
FM MONO
NORMAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Function(continued)
The DV playing function include playing the picture and playing the recorder.
DV Playing Function
Play the picture ---Manual playing
The DV playing picture function include the manual playing
and the auto playing.You may select the desired mode as
follow:
1. Press the DIGITAL button,
the DIGITAL menu will appear on
the screen.
DIGITAL
Digital Bass On
DV Play
Comb Filter On
SVM
DNR
On
Off
D.Album
DV
2. Press the CH+/- buttons to move
the indicator to " DV Play ".
DIG.
. Press the VOL+ button to
sub-menu, and then press the
CH+/- buttons to move the indicator
to " D.Album ".
CH+
MENU
CH-
VOL-
VOL+
1/5
One by One
4. Press the VOL+ button to confirm.
Note:
The right screen display show that
the saved capacity total.If the saved
capacity total is 0, the " No Image "
will show on the screen,and then
renturn to the main menu.
5. Press the CH+/- buttons to enjoy
the pictures.
Note:
EXIT
Press the 0 button to delete the current picture. If picture If the
saved capacity total is 0, the " No Image " will show on the screen,
and then renturn to the playing status.
6. On the manual playing status ,press the CAL./EXIT buttons
to return the main menu.
Play the picture ---Auto playing
. Press the SCAN button to scan the
SCAN
pictrue from current in 3 interval. If
1/5
only 1 picture, the SCAN button is no
DV Auto Play
work. The screen displays " Auto
Play "
. On the Auto Playing status, press
the MENUbutton to turnthe Auto
playing to Manual Playing.
On the Auto Playing status, it is of no effect by pressing the 0
button to delete the pictures.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Function(continued)
DV Playing Function
Playing the recorder
1. Press the DIGITAL button,
the DIGITAL menu will appear on
the screen.
DIGITAL
Digital Bass On
DV Play
Comb Filter On
SVM
DNR
On
Off
2. Press the CH+/- buttons to move
the indicator to " DV Play ".
D.Album
DV
DIG.
CH+
MENU
CH-
. Press the VOL+ button to
sub-menu, and then press the
CH+/- buttons to move the indicator
to " DV ".
OL-
VOL+
. Press the VOL+ button to
play the recorder.
Play
Note:
If the recorder is vacant, the " No
DV " will show on the screen, and
then renturn to the playing status.
CH+
MENU
CH-
VOL-
VOL+
Note:
1) On the Playing status, press the MENU button to pause, and
then press the MENU button again to go on playing.
2)Press the 0 button to delete the snatch.
3)Press the CH+/- buttons to select in turn the playing velocity:
X2,X4,X18 andX16.
Press the CH+/- buttons to select in turn the playing velocity:
X 1/2 ,X 1/4 , X 1/18 and X 1/16
4) Press the CAL./EXIT button to exit.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Function(continued)
DNR (Digital Noise Reduction) function and Comb Filter function
DNR function
1. Press the DIGITAL button,
Digital Bass On
the DIGITAL menu will appear on
the screen.
DIGITAL
Digital Scan
DV Play
Comb Filter On
SVM
DNR
On
Off
DIG.
. Press the CH+/- buttons to move
the indicator to " DNR ".
CH+
MENU
CH-
VOL-
VOL+
Digital Bass On
Digital Scan
DV Play
. Press the VOL-/+ buttons to turn
the function ON.
Comb Filter On
SVM
DNR
On
On
DIG.
Comb Filter function
DIGITAL
1. Press the DIGITAL button,
the DIGITAL menu will appear on
the screen.
Digital Bass On
Digital Scan
DV Play
Comb Filter On
SVM
DNR
On
Off
DIG.
. Press the CH+/- buttons to move
the indicator to " Comb Filter ".
CH+
MENU
CH-
VOL-
VOL+
. Press the VOL-/+ buttons to turn
the function ON.
Digital Bass On
Digital Scan
DV Play
Comb Filter On
SVM
DNR
On
On
DIG.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Function(continued)
Tilt function and Digital Bass function
Tilt function
When the TV set is affected by the geomagnetism so
that the whole picture turn tilt, you can use the function.
1. Press the FUNCTION button,
FUNCTION
the Function menu will appear on
Language English
Color Sys. Auto
the screen.
Prog. Sort
Amusement
FUN.
Special
RGB Sound
. Press the CH+/- buttons to move
the indicator to " Special ".
CH+
MENU
CH-
. Press the VOL+ button to
sub-menu.
Language English
VOL-
VOL+
Color Sys. Auto
Prog. Sort
Search Mode Ordinal
Amusement
Curtain Mode
Screen Saver
Tilt
Off
Off
0
FUN.
Special
RGB Sound
. Press the CH+/- buttons to move
the indicator to " Tilt " , and then
press the VOL-/+ buttons to adjust.
Digital Bass function
DIGITAL
1. Press the DIGITAL button,
the DIGITAL menu will appear on
the screen.
Digital Bass On
Digital Scan
DV Play
Comb Filter On
SVM
DNR
On
Off
DIG.
. Press the CH+/- buttons to move
the indicator to " Digital Bass ".
CH+
MENU
CH-
VOL-
VOL+
. Press the VOL-/+ buttons to turn
the function ON.
Digital Bass On
Digital Scan
DV Play
Comb Filter On
SVM
DNR
On
Off
DIG.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Function(continued)
7th. Star function
7th. Star display
1. Press the FUNCTION button,
the Function menu will appear on
the screen.
FUNCTION
Language English
Color Sys. Auto
Prog. Sort
7th.Star
Tetris
Jumper
Amusement
FUN.
Special
RGB Sound
. Press the CH+/- buttons to move
the indicator to " Amusement ".
World Clock
Calculator
CH+
. Press the VOL+ button to
sub-menu.
7th Star
MENU
CH-
VOL-
VOL+
0 0 0 0 0 0
New game
High score
1
. Press the CH+/- buttons to move
the indicator to " 7th. Star ", and
then press VOL-/+ buttons to
confirm.
2
Hint
Help
Quit
3
4
5
Play 7th. Star
1. Press the 1, 2, 3, 4 and 5 buttons to select " New game ",
" High score ", "Hint "," Help"," Quit " ect. Items in turn.
. Press the 4 button to enter the help menu. You can read the
help about the Tetris. After that, press the 1 button to return to the
7th. Star display (Entering other items, for example, new game, High
score ,help
display the same dialog box . Press the
1 button to confirm. Press the 2 button to cancel/exit.)
CH+
MENU
CH-
. Press the 1 button to display the dialog box .Press the 1
button once more to confirm.
VOL-
VOL+
. Press the Exit button, and then press the 1 button to exit the
game. You can press the 5 button, and then press the 1 button to
exit the game.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Function(continued)
Tetris function
Tetris display
1. Press the FUNCTION button,
the Function menu will appear on
the screen.
FUNCTION
Language English
Color Sys. Auto
Prog. Sort
Amusement
7th.Star
Tetris
Jumper
FUN.
Special
RGB Sound
. Press the CH+/- buttons to move
the indicator to " Amusement ".
World Clock
Calculator
CH+
. Press the VOL+ button to
sub-menu.
MENU
CH-
VOL-
VOL+
0 0 0 0 0 0
. Press the CH+/- buttons to move
the indicator to " Tetris ", and then
press VOL-/+ buttons to confirm.
New game
High score
Pause
1
2
3
Help
Quit
4
5
Play Tetris
1. Press the 1, 2, 3, 4 and 5 buttons to select " New game ",
" High score ", "Pause "," Help"," Quit " ect. Items in turn.
. Press the 4 button to enter the help menu. You can read the
help about the Tetris. After that, press the 1 button to return
to the Tetris display (Entering other items,for example, new game,
high score, pause
display the same dialog box .
Press the 1 button to confirm. Press the 2 button to cancel/
exit.)
. Press the 1 button to display the dialog box .Press the 1
button once more to confirm.
. Press the Exit button, and then press the 1 button to exit the
game. You can press the 5 button, and then press the 1 button to
exit the game.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Function(continued)
Chinese Jumper function
Chinese Jumper display
1. Press the FUNCTION button,
the Function menu will appear on
FUNCTION
the screen.
Language English
Color Sys. Auto
Prog. Sort
7th.Star
Tetris
Jumper
Amusement
FUN.
Special
RGB Sound
. Press the CH+/- buttons to move
the indicator to " Amusement ".
World Clock
Calculator
CH+
MENU
CH-
. Press the VOL+ button to
sub-menu.
Chinese Jumper
New Game
Help
About
VOL-
VOL+
. Press the CH+/- buttons to move
the indicator to " Chinese Jumper ",
and then press VOL-/+ buttons to
confirm.
Score
. Press the EXIT button to exit the
Chinese Jumper display.
Play Chinese Jumper
. Press the FUNCTION button to the Chinese Jumper option, then
press the EXIT button, and press the VOL+ button to select " Help " .
FUNCTION
. Press the MENU button to enter the help menu. You can read the
help about the Chinese Jumper. After that, press EXITbutton to return
to the Chinese Jumper display.
CH+
MENU
VOL-
VOL+
. Press the SOUND button to select " New Game ", and then press
the TUNE button to start the Chinese Jumper.
CH-
EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Function(continued)
World Clock and Calculator function
World Clock function
FUNCTION
1. Press the FUNCTION button,
the Function menu will appear on
the screen.
Language English
Color Sys. Auto
Prog. Sort
7th.Star
Tetris
Jumper
Amusement
CH+
FUN.
Special
RGB Sound
2. Press the CH+/- buttons to move
World Clock
Calculator
the indicator to " Amusement ", then
MENU
CH-
VOL-
VOL+
press the VOL+ button to sub-menu.
World Clock
. Press the CH+/- buttons to move
the indicator to " Calendar ", and then
press VOL-/+ buttons to confirm.
Set Time
Set Date 2004 /
1
/
1
/
13
11
CH+
Local Zone Beijing
Time Zone Date
Time
. Press the CH+/- buttons and the
VOL-/+ buttons to adjust the option,
to demand the desired date and zone.
MENU
CH-
VOL-
VOL+
Calculator function
FUNCTION
1. Press the FUNCTION button,
the Function menu will appear on
the screen.
Language English
Color Sys. Auto
Prog. Sort
CH+
MENU
CH-
7th.Star
Jumper
Tetris
Amusement
FUN.
Special
. Press the CH+/- buttons to move
the indicator to " Amusement ".
RGB Sound
World Clock
Paint
Calculator
VOL-
VOL+
. Press the CH+/- buttons to move
the indicator to " Calculator ", and
then press VOL-/+ buttons to
confirm.
Calculator
0. CE
CH+
. Press the CH+/- buttons and the
VOL-/+ buttons to select the option,
and press the MENU button to
confirm.
MENU
CH-
VOL-
VOL+
Tip:
You can press the digital button to input the numbers directly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Function(continued)
Calendar function
Calendar function
Note: The calendar can not renew automatically.
Calendar
1. Press the CAL./EXIT button,
CAL./EXIT
Date 2003 Year
1
Month 1900 to2100
the Calendar menu will appear on
the screen.
Sun Mon Tue Wed Thu Fri Sat
1
8
2
9
3
4
. Press the VOL-/+ buttons and
the CH+/- buttons to adjust the
year and the month, to demand the
desired date.
5
6
7
10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Lock
This TV set provides you with the LOCK function, you can choose it due to your
need to protectyour TV set.
Change your password
Change your password
This TV set can set a four digit password, the original
one is 0000, if you want to reset it, please follow the
instructions below.
H.LOCK
1. Press the H.LOCK button,
then press the Digital number
button to input the password,
screen will showas the form
on the right.
Lock Menu
New PW. ....
Tuning Lock OFF
Preset Prog OFF
Video Lock
Child Lock
OFF
OFF
Max Volume 100
Unlock
CH+
MENU
CH-
VOL-
VOL+
. Press the CH+/- buttons to move
the indicator to " New PW. ", and
then press the Digital number button
to input the password, change the
password.
Lock Menu
New PW.
....
Tuning Lock OFF
Preset Prog OFF
Video Lock
Child Lock
OFF
OFF
Max Volume 100
Unlock
. Press the Digital number button
to input the new password, then the
screen displays change successfully.
The indicator will move to next option
automatically.
Lock Menu
New PW.
....
Tuning Lock OFF
Preset Prog OFF
Video Lock
Child Lock
OFF
OFF
Max Volume 100
Unlock
4. If the confirmed password
is not accordance with the
new password, then the
screen will display failure.
Tip:
After changing the password, you must memorize the
new password for fear you can not use the function.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Lock (Continued)
Setting the Lock
Setting the Lock
There are Tuning Lock, Preset Prog, Video Lock ,
Child Lock and Max Volume five lock setting, you
can set it due to your need.
H.LOCK
1.Press the H.LOCK button,
the screen will show as the
form on the right.
New PW. ----
CH+
MENU
CH-
VOL-
VO+
2.Press the Direct-digit
Choosing button 0 for four
Lock Menu
times( or input the password
you set) to enter the Lock
Menu.
New PW.
....
Tuning Lock OFF
Preset Prog OFF
Video Lock
Child Lock
OFF
OFF
3.Press the CH+/- buttons to
move the indicator to
"Tuning", then press the
VOL+ button to turn the
function ON or OFF.
Max Volume 100
Unlock
Description of each lock function
1.When the Tuning Lock is set ON, if you want to enter the
TUNING menu, you will have to type the password.
2.The Preset Prog allows the TV to always be on the same
channel when you turn it on.
3.When Video Lock is set ON the AV channel cannot be used,
hence the screen will indicate that AV has been locked.
4.When the CHILD LOCK is set ON, if the buttons on the TV
are pressed, the screen will indicate that the TV set is in the
status of Child Lock, and the buttons won't work.
5.The Max Volume allows you to set a figure for the top limit
of volume. Volume control still shows 1 - 100 but volume level
is scaled down.
6.The UNLOCK allows to you to set all the lock to OFF and set
the MAX VOLUME to 100.
7 If you forget your password or a password is accidentally set
enter 9443 as the password. This will enable you to regain
control.
Download from Www.Somanuals.com. All Manuals Search And Download.
Others Functions (Continued)
VGA input adjustment
Setting the PC software
1.First, click on Settings on the Windows start
menu and click on "Control Panel".
2.Double click on the Display icon.
3.Click on the Settings tab on the display
dialog-box.
4.Adjust the resolution to 640X480 pixels
5.Click the Advanced button and click the Monitor
tab on the dialog-box. Set the vertical-frequency
to 60Hz and then click the OK button.
6. Connect the PC to the TV set by the VGA terminal.
TV/AV
VGA input adjustment
1. Press the TV/AV button to
select the RGB input mode .
HPOS
HSIZE
VPOS
VSIZE
TCC
0
0
0
0
0
0
PCC
CH+
MENU
CH-
VOL-
VOL+
3.Press the CH+/- buttons to move
the indicator to the desired options,
then press the VOL+/- buttons to
adjust the effect of the screen .
Download from Www.Somanuals.com. All Manuals Search And Download.
External connections
In the following, the methods of connecting the video/audio system and PC for the TV
set will be explained.
Video/Audio Output Connection, VGA Input
Note:
The D34FV6 model can be connected such as the order of dashed; the D29FV6 model
can be connected such as the order of real line.
DVI IN
To Video input
To VGA input
To Audio/Video input
To Audio/Video input
PC
VCR Etc.
To VGA input
DVI IN
To Video input
Download from Www.Somanuals.com. All Manuals Search And Download.
External connections (Continued)
In the following, the methods of connecting the video/audio system and other sets for
the TV set will be explained.
Video/Audio Input Connection
Side AV
VCD
To Video Terminal
To Audio-L Terminal
To Audio-R Terminal
To Audio/Video Input
DVI IN
TO AUDIO/VIDEO INPUT
VCR (WITHOUT S-VIDEO TERMINAL)
VCR(S-VIDEO TERMINAL)
DVD
Note:
1.When the S-Video signal and the AV1 signal are connected to the TV set at the same
time, the S-Video prior to the AV1 signal.
2.Don not use the Side AV2 IN terminal and rear AV2 IN at the same time.
3.In mono sound input mode please connect into side AUDIO-L orAUDIO-R and select
the MONO item in the sound mode.
4. When you receive DVD signal, you can connect the set to the
YPbPr signal.
signal or the
5. When you receive HDTV signal, you can connect the set to the YPbPr terminal, select
the matched signal 1080i 50Hz,1080i 60Hz
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble shooting
To assist in location possible faults use help guide below.
BREAKDOWN PHENOMENON
CHECKING
PICTURE
SOUND
Noise
The aerial direction and connection
Picture with snow
This is called ghosting which can be minimized with
an outside aerial, and good quality cable and
terminations. Altering the aerial direction can also
minimize this effect.
Double or Triple Image
Normal
Electrical interference which can be caused by cars,
motorbikes etc, Fluorescent lamps and dirty
insulators on overhead power cables.
Noise
Disturb
Volume Sound mute
Normal
No Picture
No colour
No sound
Ensure that the power supply is connected to
the TV setand turned on. Also ensure that the
brightness and contrast are not turned down.
No sound
Adjust colour control
Adjust channel again
Normal volume
Normal or Weak Volume
Scramble
Colour Purity faultwhich can becaused by movingthe
TV set, placingmagnets near theTV screen orturning
on/off house holdappliances such asvacuum cleaners
near the TVset. Turnthe TV off with themains power
switch for 15minutes. When thepower is turnon again
the TV setwill automatically degaussthe picture. In
server cases leavethe TV setturned off overnight.
Colour Spot
Normal volume
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized service
center.
2. The cabinet may produce the occasional "snapping sound" This is normal and caused by the
materials in the cabinet expanding with room temperature changes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Design and specifications are subject to change without notice.
D29FV6-A,D29FV6
PAL, NTSC, (SECAM)
D34FV6-A,D34FV6
M o d e l
Color system
Sound system
B/G,(D/K,I,M)
29 Pure flat
34 Pure flat
Picture tube
Sound output
8W+8W & 15W
Power consumption
Dimensions (mm)
746
W
x589
H
x546
D
900
W
x682
H
x580
D
Remote controller
Owner's manual
Battery(AA)
X1
Accessories
X1
X2
Power supply input list
Country or Area
Power supply input
Saudi Arabia
~90V-250V, 50Hz/60Hz
Mongolia, Moldova, Cyprus, Russia,
Turkmenstan, Ukraine, Latvia, Bulgiria
~150V-250V, 50Hz
Jordan, Oman, UAE, Pakistan, Lebann,
India, Yemen, Kuwait, Bahrain
~160V-250V, 50Hz/60Hz
Indonisia
Philippine
~150V-240V, 50Hz
~150V-240V, 50Hz/60Hz
New Zealand, Australia,Malaysia
Hong Kong, Algeria, Nepal, Turkey
~220V-240V, 50Hz
~220V, 50Hz
The actual voltage and frenquency of the TV set is different for the country or area.
Download from Www.Somanuals.com. All Manuals Search And Download.
01
0090505950
Download from Www.Somanuals.com. All Manuals Search And Download.
|