Operation Manual
HXC-936/576
Read the Operation Manual carefully before using your appliance.
Keep the Operation Manual in a safe place.
Appearance, color and layout of the door may vary.
Download from Www.Somanuals.com. All Manuals Search And Download.
Product
Blood bank refrigerator
Model
HXC-936
936L
HXC-576
576L
Volume
External panel
Sprayed steel sheet
Internal panel
Stainless steel sheet
Insulation
Styrene polyurethane foam (Freon-free)
Rack
42
Air circulation
Sealed
24
Cooling
Compressor
Condenser
Finned pipes
Evaporator
Rrfrigerant
Defrosting
Finned pipes
R134a
Automatic
Thermostat
Over-temp warning
Low-temp warning
Door warning
Spare storage parts
Lamp
Electronic control system
Indicator blinks for buzzer and remote warning
Indicator blinks, without deferred buzzer alarm
Door warning indicator on, and buzzer signal 10 minutes later
Permanent static storage
35Wx1
Lamp, 35Wx2
Temp recorder
Accessories
For 7 days
Key: 1 set; Recording paper: 1 box;
Operation manual: 1; Plastic bag: 1; 9V Battery: 4
Net weight
254kg
180kg
Rechargeable battery
UN7.0-8(8V7.0AH)
YZB/LU 0028-2004
LYGX (Z) No.: 2580088
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Control
pannel
Light
switch
Auto temperature
chart recorder
Door lock
Inner light
Glass door
Rack
Casters
HXC-936 Diagram
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5.Rack
The racks can be loaded with 320 blood bags of 200ml.
6.Inner light
Download from Www.Somanuals.com. All Manuals Search And Download.
10 min
10 min later
Download from Www.Somanuals.com. All Manuals Search And Download.
Temperature adjusting:
Press and hold both SENSOR SELECT button and CALIB CANCEL button for more than 3s until
original setting starts flashing to indicate that it enters temperature setting mode. With each press
of CALIB CANCEL button, temperature setting increases 0.1 until reaching upper limit, which
is defaulted as 8 . If press again, it returns to lower limit, which is defaulted as 2 . It repeats the
above cycle. When it reaches your desired temperature, if you don't press the button within 5s,
the temperature setting will be saved and it automatically quits the temperature setting mode (the
temperature setting range programmed at factory is 2 - 8 ). The display returns to display inside
sensor temperature or average temperature before setting is made (not flashing).
Download from Www.Somanuals.com. All Manuals Search And Download.
|