TFT-LCD TELEVISION
OWNER`S MANUAL
MODELS: P50A11-AK
P60A11-AK
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENT
BEFORE OPERATING
Warning..............................................................................................................1
Important Safety Instructions..............................................................................2
Buttons and interface location........................................................................... 4
Remote controller...............................................................................................6
Remote controller key function...........................................................................7
External equipment connections........................................................................8
BASIC OPERATING
Switching on/off the TV set................................................................................14
Choose the Menu language............................................................................. 14
Choose the Input Source ................................................................................. 14
Searching Channel............................................................................................15
Watching TV Program........................................................................................18
Picture Control Functions................................................................................. .19
Sound Control Functions....................................................................................21
Timer Functions..................................................................................................23
Function Menu...................................................................................................24
Adjust Menu.......................................................................................................27
Lock Setup ........................................................................................................28
OTHERS
Others functions................................................................................................30
Stream media broadcast system.......................................................................31
Maintenance......................................................................................................44
Troubleshooting.................................................................................................45
Specifications ...................................................................................................46
Format..............................................................................................................47
Accessories
42
46
Screws
Screws
8
4
Alkaline battery
(AAA)
Power cable
User's manual
Remote controller
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
*To avoid electric hazards, it is strongly suggested that the back cover not be opened, as
there is no any accessory inside the casing.
*If necessary, please contact authorized after-sales services.
*A lighting flash mark in a triangle: Apotentially hazardous situation, which, if not avoided,
could result in serious injury by high voltage.
*An exclamation mark in a triangle: Major part or accessory of which technical specifications
must be followed if it is to be replaced.
Warning:
To avoid fire or electric hazards, never place your television receiver in an area
with heavy moisture. Attention should be paid to avoid accidental scratches or
impacts onto the screen.
Caution:
Please read this manual carefully before using your television and keep this
manual in a good place for future reference.
To achieve the best performance of your television, read this User's Manual
carefully and properly store it for future reference.
Information of screen displays and figures in the User's Manual may vary due
to technical innovations.
Caution:
Unauthorized disassembly of this product is prohibited.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
The product should be tightly fixed to avoid
drop damages and even fire.
To avoid fire hazards, do not use this
product under direct sunlight or closely
to heat sources.
Unplug the power supply and antenna of
the product when there is a rainstorm,
especially
Do not locate the product close to water
or oil, which may cause fire hazards.
Thunderstorm.
Do not use damaged or worn electric plugs
and keep electric cord away from heat sources
to avoid electric shocks or fire hazards.
Do not connect excessive sockets in parallel
or share the same socket by multiple plugs
to avoid fire hazards.
Unauthorized disassembly of the television
is prohibited to avoid electric shocks or fire
hazards. Contact
The product must be placed on a solid and
stable surface to avoid collapse.
authorized after-sales
service if technical
service is needed.
Keep the product away from a transformer
or heat source to avoid fire hazards.
Disconnect the product from power supply
and contact authorized after-sales service
if abnormal sound is heard in the product.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Don't use or store inflammable materials
near the product to avoid explosion or fire
hazards.
Don't place the product in a humid area to
avoid fire hazards.
Never touch the plug when your hand is wet
as this might cause electric shocks.
The antenna of the product should be away
from electric cable to avoid
electric shocks.
Always make sure that the televisionis well
plugged as poor electric
connection might cause fire.
When antenna is used, measures should be
taken to prevent water
from flowing down
along the cable into
the television.
Unplug the television, use soft fabric, never
chemicals, if you are going to make
cleaning of the product.
Make sure that no
The plug and electric cable must be kept
clean to avoid electric
shocks or fire
hazards.
water drops in the
product.
Disconnect the television from power supply
to avoid electric shocks or fire
hazards in a long
Disconnect the television from power supply
and antenna when there is a
rainstorm or thunderstorm
to avoid electric shocks
vocation.
or fire hazards.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons and interface location
- This is a simplified representation of front panel.
- Here shownmay be somewhatdifferent from your TV.
Front panel Control
MENU
1
CH+
USB2
jack
2
CH-
3
USB1
Side
VOL+
VOL-
4
5
6
VIDEO
AUDIO
VIDEO input
TV/AV
POWER
L
L-AUDIO-R
left and right
audio input.
7
R
Side AV
Remote Sensor
Indicator
Buttons and functions
1. Menu button
2. Channel number increase
3. Channel number decrease.
4. Volume increase: for enhancing the volume or adjusting MENU.
5. Volume decrease: for lowering the volume or adjusting MENU
6. TV/AV button
7. Power: for turning on or off the power supply.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons and interface location
Rear panel Control
3
AV OUT
IN1
IN2
ANT. IN
Y
Pb/Cb Pr/Cr
L
AUDIO
R
VIDEO
L
AUDIO
R
S-VIDEO IN
HDMI /DVI VIDEO
VGA IN
AC IN
IN
AV1 IN
5
AC In This TV operates onAC power.Never attempt to operatethe TV on DC power.
HDMI Input Connnect a signal toHDMI/DVI
VGA Input Connect the monitor outputconnector from a PCto the jack
DVD/DTV Input(Component )
Connect a component video/audiodeviceto these jacks.
AV1 Input
Connect audio/video out froman audio/video device tothese jacks.
S-Video Input Connect S-Video out froma S-Video device tothese jacks.
Earphone jack Earphone Audio output terminal
Antenna Input Connect cable or antennasignals to the TV, either directly or
through your cable box.
Video/Audio output terminal
Connect ordinary video/audio orother appliance audio inputterminals.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote controller
Battery loading
1.Slide open the cover of the battery compartment on the back of the remote controller.
2.Load two 7# (AAA)alkaline batteries in the compartment. (plus and minus poles to
respective mark)
3.Replace the cover of the battery compartment.
1
2
3
Precautions
As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.
Make sure that two AA alkaline batteries
are loaded. The batteries must be of the
same type. The batteries must be
located properly. The batteries are not
rechargeable.
Make sure that there is no obstacle
between the remote controller and
television set.
Keep the remote controller away from
heat source or humid area to ensure
effective performance of the remote
controller.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote controller key function
POWER
Information display
Display of current channel
signals, program and systems
Turns your TV or any other
programmed equipment on
or off, depending on mode.
Picture still
Nicam select button
DISPLAY
MUTE
POWER
PIC.SIZE
MUTE
Switches the sound on or off.
Picture SIZE button
picture scale
STILL I/II
DVD mode
Select DVD mode
S-Video mode
select S-Video.
S-VIDEO DVD/DTV PC/DVI
TV/AV
PC/DVI mode
Select PC/DVI mode.
TV/VIDEO
OK button
Q.VIEW
OK
Q.VIEW
Return to the last channel
viewed.
CH+
VOLUME UP/DOWN
Increases/decreases
the sound level.
VOL-
VOL+
MENU
CH-
MENU
Brings up the main menu
to the screen.
CHANNEL UP/DOWN
Selects available channels
found with Auto search.
Sound mode option
Theater, Personal,
Standard, Music
SSM
PSM
Picture mode option
Standard, Soft,
Bright, Personal
1
2
5
8
0
3
NUMBER buttons
4
7
6
9
CHANNEL select
Zoom/Move
ZOOM/MOVE
-/--
Program edit
PIP mode buttons
(no available)
PIP: PIP select
PIP
SWAP SCAN CH.EDIT
Swap: main picture and
sub picture exchange
Scan
scan program
H.LOCK Timer SKIP
SHUTTLE SLEEP
Shuttle button
Timer skip button
H.clock button
USB
RETURN
Sleep button
ENTER
ZOOM
HELP
USB system buttons
7
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
- Antenna or Cable Service without a Cable Box Connections
- For optimum picture quality, adjust antenna direction if needed.
outdoor
antenna
(not supply)
Antenna input
75 standard
coaxial type
ANT IN
75 coaxial cable
300 twin-lead cable
Plug
Antenna adapter
(additional purchase)
(not supply)
Note
* It is recommended that you'd better use 75 coaxial cable to remove the
disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
To improve picture quality in a poor signal area, purchase
and install a signal amplifier.
If the antenna needs to be split for two Tv`s, install a 2-
WaySignal Splitter in the connections.
If the antenna is not installed properly, contact your dealer
for assistance.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
NOTE: All cables shown are not included with the TV.
Choose Your Connection
There are severalways to connectyour television, dependingon the componentsyou
want to connectand the qualityof the signalyou want toachieve. The following are
examples of someways to connectyour TV.
Choose the connectionwhich is bestfor you.
VCR Connection
- To avoid picturenoise (interference), leavean adequate distancebetween the VCRand TV.
Connection Option 1
Set VCR outputswitch to channel3 or 4and
then tune theTV to the same channelnumber.
Connection Option 2
1. Connect theaudio and videocables from the
VCR's output jacksto the TV input jacks, as
shown in thefigure.
When connecting theTV to VCR, match the
jack colors (Video = yellow, AudioLeft = white,
and Audio Right = red).
If you connectan S-VIDEO outputfrom VCR to
the S-VIDEO input, the picture qualityis
improved; compared toconnecting a regular
VCR to theVideo input.
2. Insert avideo tape intothe VCR andpress
PLAY on the VCR. (Refer to theVCR owner`s
manual.)
AV OU
ANT. IN
L
AUDIO
R
VIDEO
L
AUDIO
R
S-VIDEO IN
AV IN
3. Select theinput source withusing the
INPUT button on theremote control, and
then press CH+/-button to selectthe source,
press the VOL+button to confirm.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
DVD Setup
How to connect
1. Connect the DVD videooutputs (Y, Pb/Cb,
Pr/Cr) to the COMPONENT(Y, Pb/Cb, Pr/Cr)
input jacks on theTV and connect the DVD
audio outputs to theAUDIO jacks on theTV,
AV OUT
as shown in the figure.
2. If your DVD onlyhas an S-Video outputjack,
L
AUDIO
R
VIDEO
L
AUDIO
R
Y
PbPr
CbCr
S-VIDEO IN
connect this to the S-VIDEO inputon the TV
and Connect the DVD audiooutputs to theAV IN
jacks on the TV, as shown in thefigure.
IN
AV1 IN
NOTE: If your DVD player doesnot have
component video output, use S-Video.
How to use
1. Turn onthe DVD player, insert a DVD.
2. Use the S-Videobutton on the remote
control to select S-VIDEO orYPbPr/YCbCr
mode.
or
3. Press Play button on externalequipment
for program play.
DVD
4. Refer to the DVDplayer's manual for
operating instructions.
HDMI or DVI Setup
-Towatch digitally broadcast programs,
purchase and connect a digitalset-top
box.
AV OUT
IN1
IN2
L
AUDIO
R
VIDEO
L
AUDIO
R
Y
PbCb CbCr
How to connect
HDMI/DVI VIDEO
VGA IN
AV IN
Use the TV`s COMPONENT(Y, Pb/Cb,
Pr/Cr) INPUT jacks, VGAor HDMI port for
video connections, depending on your
set-top box connections available.
Then, make the corresponding audio
connections.
How to use
1. Turn onthe digital set-top box.
(Refer to the owner`s manual forthe digital set-top box.)
2. Use TV/AV on the remote controlto select VGAor HDMI
(Y, Pb/Cb, Pr/Cr) mode.
3. Press Play button on externalequipment for program play.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
PC Setup
How to connect
1. Use the TV`s VGAIN port forvideo connections.
2. Then, make the corresponding audio
connection. If usinga sound card, adjust the
PC sound asrequired.
How to use
1. Turn on the PC and the TV.
2. Turn on the display by pressing the POWER
button on the TV's remote control.
IN1
IN2
L
AUDIO
R
Y
PbCb PrCr
HDMI/DVI VIDEO
VGA IN
IN
3. Use PC/DVI on the remote control to select
VGA source.
4. Check the image on your TV. There may be
noise associated with the resolution, vertical
pattern, contrast or brightness in PC mode.
If noise is present, change the PC mode to
another resolution, change the refresh rate to
another rate or adjust the brightness and contrast
on the menu until the picture is clear. If the refresh
rate of the PC graphic card can not be changed,
change the PC graphic card or consult the manufacturer
of the PC graphic card.
NOTES:
1 Avoid keeping a fixed image on the TV's screen for a long period of Time. The fixed image
may become permanently imprinted on the screen.
2 The synchronization input form for Horizontal and Vertical frequencies is separate.
3 To obtain the best picture, do not play the USB, YPbPr, HDMI or VGA source at the same
time.
Monitor Out Setup
The TV has a specialsignal output capabilitywhich allows
you to hookup a secondTV or monitor.
AV OUT
Connect the secondTV or monitor to theTV`s AV OUT.
See the OperatingManual of thesecond TV or monitor for
further details regardingthat device`s inputsettings.
L
AUDIO
R
VIDEO
L
AUDIO
R
S-VIDEO IN
AV IN
Notes:
YPbPr, VGA, HDMI, S-Video input sourcescannot be used
for Monitor out.
When connecting withexternal audio equipments, such
as amplifers orspeakers, please turnthe TV speakersoff.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connections
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a
TV programme withoutdisturbing the otherpeople in theroom.
Plug a set of headphones into the 3.5mm
mini-jack socket on the rear panel of the set.
ANT IN
Note
Prolonged use of headphones at a high volume
may damage your hearing.
You will not receive sound from the speakers
when you connect headphones to the system.
Power source
TO USE AC POWER SOURCE
Use theAC polarized linecord provided for
operation onAC. Insert theAC cordplug into
a standard polarizedAC outlet.
AC Outlet
Wider Hole
and Blade
NOTES:
Never connect theAC line cord plug toother
than the specifiedvoltage. Use theattached power
cord only.
If the polarizedAC corddoes not fitinto a non-
polarized ACoutlet, do notattempt to fileor cut
the blade. Itis the user`sresponsibility to have
an electrician replacethe obsolete outlet.
If you causea static dischargewhen touching
the unit andthe unit failsto function, simply
unplug the unitfrom theAC outlet andplug it
back in. The unit shouldreturn to normaloperation.
Polarized ACCord Plug.
Polarized AC Cord Plug
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching ON/OFF the TV set
In the manual, the OSD (on screen display) may be different from your TV`s
because it is just an example to help you with the TV operation.
Switching ON/OFF the TV set
1
Please press down the powerswitch to switch onAC power supply and the power indicator
will light .
2
3
If the indicator is lightingin red, press POWER button on the remote control again.
If you want to exchangeto standing by status, pleasepress down POWER button onthe
remote controller.
4 If you want to fullyswitch off the power supply for the TV set, please press down thepower
switch button on the TV set.
Choose the Menu Language
When you start using your set for the first Time, you must select the language which will be
used for displaying menus and indications.
1 Press MENU and VOL+/-button to select the Function Menu.
2 Press VOL+ button and use CH+/-button to select Menu Set.
3 Press VOL+ button and use CH+/-button to select Language.
4 Select a particular language by pressing VOL+/- button
repeatedly.
You can choose one of two languages.(Chinese or English)
Language
English
Menu H-Position
Menu V-Position
Menu Timeout
Transparency
50
50
60s
0
5 When you are satisfied with your choice, press MENU
button to return to normal viewing.
Picture Sound Tuning Function Adjust Timer
Choose the Input Source
If you hopeto enjoy thepicture from theexternal input source,
before to selectthe source, youneed to connectthe devices,
otherwise, when youselect the source, the none orno signal
will appears onthe screen.
Source
Press TV/AV button on remote control, the menu appears
on the screen. Then press CH+/- to selectthe TV item,
and press VOL+/-to ensure it.
Before watching TV program, youneed to ensure
your TV in TV mode.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching Channel
This TV set has three methods to set channels, which are respectively full automatic,
manual search fine tune.
In this section, how to use the remote control to set channel is explained. You can
also use buttons on the TV set to set channel.
Automatic search
1 Press MENU button and then use VOL+/- button to select the
Channel Edit
Exchange
>>>
>>>
>>>
>>>
Tuning menu.
Note : 1.the Tuning menu will be only operated in normal
TV mode;
Search Set
Auto Search
2. When the Tuning Lock is setting as Off, it is selectable.
2 Press VOL+ button and then use CH+/- button to select
"Auto Search" item.
Picture Sound Tuning Function Adjust Timer
Auto Search
3 Press VOL+ button to ensure automatic search function work.
Frequency 183MHz
7
After the search has finished, all channels now playing program
will be automatically preset in order and backtrack the 0 channel.
4 Press MENU button to stop automatic search function.
Manual search
If excessive channel signal ofunwanted programs are
received in local area, manualsearch function is
recommended.
Channel Edit
Exchange
>>>
>>>
>>>
>>>
Search Set
Auto search
1 Press MENU button and then use VOL+/- button to select the
Tuning menu.
2 Press VOL+ button and then use CH+/- button to select
"Search Set" item.
Picture Sound Tuning Function Adjust Timer
3 Press VOL+ button to enter the submenu.
Fine Tune
Search
17
>>>
4 Press CH+/- button to select Search option, and use VOL+/-
button to start searching.
Frequency
791.22MHz
When searching successfullyfor the channel, the Manual
search stopping automaticallyand save tothe current
channel.
Picture Sound Tuning Function Adjust Timer
5 Press OK or MENU button to stop searching.
Fine tune
If the pictureand/or sound arepoor, tryusing the FINE
TUNE feature. Donot use thisfeature unless reception
is poor.
Fine Tune
Search
17
>>>
Frequency
791.22MHz
1 Repeat above steps 1-3, then press CH+/- button to select
the Fine Tune item.
Picture Sound Tuning Function Adjust Timer
2 Press VOL-/+ button repeatedly to carry out fine tune, till the
best picture and sound are obtained, then loosen the button.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching Channel
Channel Edit
1 Press MENU button and then use VOL+/- button to
select the Tuning menu.
Channel Edit
Exchange
>>>
>>>
>>>
>>>
Search Set
Auto Search
2 Press VOL+ button and then use CH+/- button to
select Channel Edit item.
Picture Sound Tuning Function Adjust Timer
3 Press VOL+ to enter the submenu.
Channel No.
Channel Name
Color System
Sound System
Skip
17
---
4 Press CH+/- button to select the item to adjust, and
press VOL+/- button to adjust the item to select.
SECAM
B/G
Off
Channel No.
Press VOL+/- button to select the channel number to edit.
Picture Sound Tuning Function Adjust Timer
Channel Name
This will adjustthe channel name.
Press VOL+/- buttonto move thecursor, andthen use CH+/-
button to selectthe letter, then press MENUor OK buttonto
confirm.
Color System
Press CH+/- button to select "Color System", then press
VOL-/+ button toselect the correct color system. In general,
you can set it as "AUTO".
Sound System
Press CH+/- button to select "Sound System", then press
VOL-/+ button toselect the correct sound system.
Skip
After the programs are presetting, you can skip some programs
so that toselect your favorite channels only.
Press VOL-/+ button to set Skip as On.
If you want to recover the skipped channel
1. Use Direct-digitChoosing button toselect the numberof the
channel to berecovered.
2. Do theabove steps again.
3. Press VOL+/-button to setSkip as Off.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching Channel
Channel Exchange
1 Press MENU button and then use VOL+/- button to
select the Tuning menu.
Channel Edit
Exchange
>>>
>>>
>>>
>>>
Search Set
Auto search
2 Press VOL+ button and then use CH+/- button to
select "Exchange" item.
Picture Sound Tuning Function Adjust Timer
3 Press VOL+ to enter the submenu.
4 Press CH+/- button to select the To Channel item,
and use VOL+/- button to set the desired channel
number.
Current Channel
To Channel
Exchange
17
10
>>>
5 When you are satisfied with your choice, press
CH+/- button to select Exchange item, and then
press VOL+ button to confirm, at this time, the
Exchange OK! will display on the screen.
Picture Sound Tuning Function Adjust Timer
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV Program
You can watch TV program in a presetting channel.
To select the TV mode
Before watching TV program, you may ensure your TV in TV mode.
Press TV/AV button to select TV mode.
How to select the desired program
1 Using "Program number" buttons.
Directly enter the channel number with the numeric keypad on the remote control.
If to select channel numbers of double-digit or three-figure ,press continuously the
numeric buttons in three second.
2 Using CH+/- button.
Press the CH+ button to select a channel number in number increasing direction.
Press the CH- button to select a channel number in number decreasing direction.
How to select the desired sound
Press VOL+/- button on theremote or the front ofthe
TV set to adjust thevolume level. The range is 0~100.
Volume
When the volume button arepressed the volume level is
displayed automatically on the TV screen.
Quick program view
This function enables quick swap to the last watched program.
1 Suppose the channelnumber you usedjust now is8 and thechannel
number you areusing is 18(as shown inthe figure).
2 If you want to return to the last watched program channel 8, you can
simply press theQ.View button.
3 If you want to return to channel 18, press the button again. Use this
function, you caneasily change betweenthe channel youare using and
the channel youused lastTimer.
Shuttle function
Shuttle function enables quick swap to setting program.
Press SHUTTLE button about 3 second, and the display Channel Stored
on the screen, at the time, you may operate other, then if you scan over
program, you may press again shuttle button to return to the setting
program.
Channel Stored
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Control Functions
The TV menu gives you can an overviews of the menus you can select.
Note: Depending on the input signal, one or more menu items may not be
selectable.
How to select picture modes
You can quickly selectthe desired picturemode from threepreset modes andone
customized mode.
Press the PSM button to selectthe desired picturequality. Four kinds ofpicture modes
(i.e., "Standard","Bright", "Soft", "Personal" ) canbe selected inturn.
Personal A sparesetting that canbe adjusted topersonal tastes
Standard Designed for roomsthat have goodall round lighting
Soft Designed for nighttime low lightviewing
Bright Designed for roomswith high ambientlighting such asday time sport;
How to customize your own picture status
1 Press MENU button and then use VOL+/- button to select
Picture menu .
Brightness
Contrast
sharpness
Hue
50
50
50
50
50
Chroma
2 Press VOL+ button and then use CH+/- button to select the
item to be adjusted, then press VOL+/- button to obtain the
desired effect.
Standard
Color Temp.
Picture Sound Tuning Function Adjust Timer
I T E M
Press VOL-
Press VOL+
Brightness
Contrast
Dark
Bright
NOTE
When Personal modeis not
selected, the Personalmode
can be enteredautomatically
if Contrast, Brightness, Color,
Hue and Sharpnessparameters
are adjusted.
Weak
Strong
Sharp
Soft
Sharpness
Chroma
Shallow
More green
Deep
More purple
Hue(only in NTSC mode)
Color Temperature
This will increase or decrease Warm (red) and Cool (blue)
colors to suit personal preferences.
Select Cool to give the white colors a blue tint, Standard to
give the white colors a neutral tint, Warm to give the white
colors a red tint.
Brightness
Contrast
sharpness
Hue
50
50
50
50
50
Chroma
1 Press MENU button and then use VOL+/- button to select
Picture menu .
Standard
Color Temp.
Picture Sound Tuning Function Adjust Timer
2 Press VOL+ button and then use CH+/- button to select
Color Temp. Item, and then press VOL+/- button to select
the desired effect.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Control Functions
Aspect Ratio Control
Press the PIC.SIZE button theAspect Ratio menuappearance
on the screen.
4:3 mode
Choose 4:3 when you want to view a picture with an original 4:3
aspect ratio, with gray bars appearing at both the left and right
sides.
Full Screen
Choose Full Screen when you want to adjust the picture
horizontally, in a linear proportion to fill the entire screen.
Wide Screen
Choose Wide Screen when you want to view the picture to
be altered, both vertically and horizontally extended and
cropped.
Note:1. If a fixed image is displayed on the screen for a long
time, it image may become imprinted on the screen and
remain visible.
2. In VGAmode, there are only 4:3 and Full screen modes.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Control Functions
How to choose sound mode
You can quickly selectthe desired soundmode from fourpreset modes andone
customized mode.
Press the SSM button to selectthe desired soundquality. Five kinds ofsound modes
(i.e., "Standard","Personal", "Theater", "News"and"Music") can beselected in turn.
Personal A sparesetting that canbe adjusted topersonal tastes
Standard Normal sound withmoderate bass andtreble setting
Music Designed the sound to best suit music programs
Theater Enables extra bassand treble toenhance the movieexperience;
News Designed to reduce the bass and treble which enhances the voice for news programs
Equalizer
Equalizer
Surround
Balance
>>>
Off
0
1 Press MENU button and then use VOL+/- button to select
Sound menu .
2 Press VOL+ button and then use CH+/- button to select
Equalizer item, then press VOL+/- button to enter the submenu.
Picture Sound Tuning Function Adjust Timer
3 Press VOL+/- button to select the item to be adjusted, then
press CH+/- button to obtain the desired effect.
.
Equalizer
Balance
This will adjustthe output ofthe right andleft speakers to
obtain the beststereo reproduction foryour listening
position.
The intermediate value is 0. Whenindication value of Balance
increases toward+50, sound of the rightand left speaker
becomes stronger and weaker, respectively. When indication
value of Balance decreases toward -50, sound of the right
and left speaker becomes weaker and stronger.
Press CH+/- buttonto select Balance,
Press VOL+ buttonto increase the audio output in the right
speaker;
press VOL- buttonto increase theaudio output in the left
speaker.
Surround Sound
The surround soundfeature expands theaudio listening
field wider anddeeper to createexceptional sound
quality from theTV`s speakers.
Press CH+/- buttonto select Surround,
press VOL+/- buttonto set Surroundas Off or On
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Control Functions
Eliminate Sound
When you needto pay attentionto surrounded sounds,
or there isa telephone callingyou or thereare some
guests visiting you, the sound elimination(mute)
function is veryconvenient.
1 Press the MUTEbutton on theremote control and"Mute"
type face willdisplay on thelower part ofthe screen. At this
Time, the sound of theTV set is turned off.
2 If you wantto recover thesound, press theMUTE button
again or directlypress VOL+ button.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Functions
Current time setting
The current timewill only workif the TV set is turned on orin standby. When theset is
disconnect from thepower supply oris turned off by themain power onthe rear panel,
the current timelooses power andwill need tobe reset whenthe power isreconnected.
1 Press MENU button and then use VOL+/- button to select
Timer menu .
Current Time
Off Time
00:15
--:--
--:--
On Time
1
--:--
1
On Channel
Remind Time
Remind Channel
2 Press VOL+ button and then use CH+/- button to select
Current Time, and then press VOL+/- button to select hour
or minute position, and then press CH+/- button to set the
value of hour or minute.
Picture Sound Tuning Function Adjust Timer
3 Press MENU button to return to the previous menu.
On/Off Time
Using on/off Time function, the TV set can automaticallyturn on toa preset programor
shut down ina preset time. When the setis disconnect fromthe power supplyor is turned
off by the main power, the on/offt time looses.
Current Time
Off Time
00:15
--:--
1 Press CH+/- buttonto select OnTime, press VOL+/-button
to select houror minute position;then press CH+/-button to
set the valueof hours orminutes.
--:--
On Time
1
--:--
1
On Channel
Remind Time
Remind Channel
2 Press CH+/- buttonto select OnChannel, then pressCH+/-
button to selectyour desired channel.
Picture Sound Tuning Function Adjust Timer
3 Repeat step 1-2to set Off Timeitem.
Remind Time and Remind Program
Program remind Time, that displays an on-screen reminder prompt, when a
program on adifferent channel is due tostart.
1 Press MENU button and then use VOL+/- button to select
Timer menu .
Current Time
Off Time
00:15
--:--
--:--
On Time
2 Press VOL+ button and then use CH+/- button to select
Remind Time, and then press VOL+/- button to select hour
or minute position, and then press CH+/- button to set the
value of hour or minute, then press MENU or OK button to
confirm.
1
--:--
1
On Channel
Remind Time
Remind Channel
Picture Sound Tuning Function Adjust Timer
3 Press CH+/- button to select Remind Channel, and then
VOL+/- button to select the channel number.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Menu
Menu Set
Menu Set
>>>
>>>
1 Press MENU button and then use VOL+/- button to select
PIP
>>>
Picture Optimize
Scene Mode
Multicolor Window
Time Skip
Function menu .
Film
>>>
2 Press VOL+ button and then use CH+/- button to select
Menu Set, and then press VOL+ button to enter the submenu.
00:00
3 Press CH+/- button to select the item to be adjusted, then
press VOL+/- button to adjust the desired value.
Picture Sound Tuning Function Adjust Timer
Language
Toselect the menu language.
Language
English
Menu H-Position
Menu V-Position
Menu Timeout
Transparency
50
50
60s
0
Menu H-Position
To adjust the menu H-positon, press VOL- button to move
menu toward left, press VOL+ button to move menu toward
right.
Menu V-Position
To adjust the menu V-positon, press VOL- button to move
menu toward down, press VOL+ button to move menu toward up.
Picture Sound Tuning Function Adjust Timer
Menu Timeout
Each Press of VOL+/- button repeatedly to select the number
of preset minutes, the Time will be set in sequence: 5s, 10s,
15s, 20s, 25s, 30s, 35s,40s,45s,50s,55s,60s.
Transparency
To set transparency background of OSD.
Picture In Picture
Menu Set
>>>
>>>
1 Press MENU button and then use VOL+/- button to select
PIP
Function menu .
>>>
Picture Optimize
Scene Mode
Multicolor Window
Time Skip
Film
>>>
2 Press VOL+ button and then use CH+/- button to select PIP,
and then press VOL+ button to enter the submenu.
00:00
3 Press CH+/- button to select the item to be adjusted, then
press VOL+/- button to adjust the desired value.
Picture Sound Tuning Function Adjust Timer
PIP Size
To select the PIPmenu size. PressVOL+ button toselect the
desired size. Fivekinds of sizes(i.e., Small, Large, POP, PBP
and Off) can be selectedin turn.
PIP Size
Small
PIP Source
TV
50
50
PIP H-Position
PIP V-Position
PIP Source
To select the PIPpicture source.
Press VOL+ buttonto select thedesired source.
Picture Sound Tuning Function Adjust Timer
PIP H-Position
To adjust the PIPmenu H-positon, pressVOL+ button tomove
menu toward right, press VOL- buttonto move menutoward left.
Note: In LocKSet, if the
source lock isset as on, the
PIP source isnot available.
PIP V-Position
To adjust the PIPmenu V-positon, press VOL+ buttonto move
menu toward down, press VOL- buttonto move menutoward up.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Menu
Picture Optimize
1 Press MENU button and then use VOL+/- button to select
Menu Set
>>>
>>>
Function menu .
PIP
>>>
Picture Optimize
Scene Mode
Multicolor Window
Time Skip
Film
>>>
2 Press VOL+ button and then use CH+/- button to select
Picture Optimize, and then press the VOL+ button to enter
the submenu.
00:00
Picture Sound Tuning Function Adjust Timer
3 Press CH+/- button to select the item to be adjusted, then
press VOL+/- button to adjust the desired value.
3A Optimize
MADI
Off
Standard
Off
DCDI
3A Optimize
CCS
Off
The 3A optimize tracks picture contrast and color to improve
the quality of picture in terms of brightness and sharpness.
Repeat step 3 to set 3A optimize as on or off.
3DNR
Picture Sound Tuning Function Adjust Timer
MADI (Motion, Adaption De-Interlacing)
To select the sport mode.
Press VOL+ button to select the desired mode.
Five kinds of sources (i.e., Standard, Theater, Personal, and
Music) can be selected in turn.
DCDI (Directional Correlational De-Interlacing)
To adjust and improves picture quality.
CCS(Gross Color andControl)
To adjust and improves picture quality.
3DNR (3D Noise Reduction )
Automatically filters out and reduces the image noise and
improves picture quality when receiving weak video signals.
Select Off/Auto/Low/Medium /High according to the image
noise of the broadcast signal.
Scene Mode
1 Press MENU button and then use VOL+/- button to select
Menu Set
>>>
Function menu .
PIP
>>>
>>>
Picture Optimize
Scene Mode
Multicolor Window
Time Skip
Film
>>>
2 Press VOL+ button and then use CH+/- button to Scene
Mode option.
00:00
3 Press VOL+/- button to select the Film,Vivid,Nature, Sport
in turn.
Picture Sound Tuning Function Adjust Timer
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Function menu
Multicolor Window
1 Press MENU button and then use VOL+/- button to select
Function menu .
Menu Set
>>>
>>>
PIP
>>>
Picture Optimize
Scene Mode
Multicolor Window
Time Skip
Film
>>>
2 Press VOL+ button and then use CH+/- button to select
Multicolor Window, and then press VOL+ button to start.
00:00
Note:
Picture Sound Tuning Function Adjust Timer
1. In PIPOn, the functionwill not beavailable.
2. In VGAmode, the functionwill not beavailable.
3. When thescene mode setas on, thefunction will not
be available.
4.In 4:3 andfull screen mode, the Mult-color Windowwill
not be available.
Time Skip
1 Press MENU button and then use VOL+/- button to select
Menu Set
>>>
Function menu .
PIP
>>>
>>>
Picture Optimize
Scene Mode
Multicolor Window
Time Skip
Film
>>>
2 Press VOL+ button and then use CH+/- button to select Time
Skip, and then press VOL+ button to set the desired time.
00:00
Picture Sound Tuning Function Adjust Timer
Note:
1. If prior tothe completion ofthe countdown time,
press the Timer Skip button, the functionwill be
canceled.
2. The functionwill be availablein TV mode.
3. After start-up timeskip function, ifswitched to other
sources, the functionautomatically canceled.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust Menu
In VGA input mode , H-Position and V-Position can be used to adjust the picture
position.
When VGA HDMI input mode is set
1 Press MENU button and then use VOL+/- button to select
Adjust menu .
Auto Adjust
>>>
0
Clock
0
Phase
50
50
2 Press the VOL+ button and then use CH+/- button to select
the item to be adjusted, then press the VOL+/- button to adjust
H-Position
V-Position
I/P Info.
1366x768@50Hz
the desired value.
Auto Adjust
This is used to reset the default setting parameters (After
the operation, Auto Adjusting will be display on the screen)
Picture Sound Tuning Function Adjust Timer
Clock
This is used for adjusting H Position and V Position as well
as relative parameters in VGA modes.
Phase
This is used for adjusting the phase of pixel clock in VGA
mode.
H Position
Horizontal position of picture can be adjusted in this item.
V Position
Vertical position of picture can be adjusted in this item.
Note:
1.As adjusting Hposition or Vposition parameter, It is
natural that thepicture will havefaintness once ina
while if therange is more, then to adjustcontrarily to
normal position.
2.As the frequencyof display differ in PCdevice you
may select theappropriate frequency toobtain desired
effect. If the signal ofreceive is excess, the picture can
be not displayedor wrong onthe screen.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Lock Setup
The television hasthe function ofsecurity default lock. Password needs tobe entered
when the programlock mode isto be set.
How to use the password function
Press H.LOCK button, Password will appearon the
screen.
Password ----
The initial password of thetelevision is 0000. When the
password achieved, theLoct Set menuwill display on
the screen.(as follow)
Lock Set
>>>
Change Password
Tuning Lock
Off
Note: If thepassword is notcorrectly entered, youwill
be required toreenter the passwordand the cursorwill
stay at thefirst place.
Off
Source Lock
Preset Source
Off
Off
Preset Channel
Child Lock
Off
100
Max Volume
UnLock
Press MENU to cancel thewindow.
>>>
Note: The Tuning Lock and Source Lock will be only
useful in TV mode.
To set new Password
The password canbe changed.
After enteringthe Lock setmenu, Press CH+/-to select
password, Press vol+button, the screenwill display the
follow.
Lock Set
------
------
New Password
Confirm Password
Press the digitbuttons, If correctpassword is entered, the
change successful willdisplay on thescreen, at thistime,
the old passwordwill be changed.
Tuning Lock
Press CH+/- to select Tuner Lock and VOL+/- to set On/Off. (To set On, some operation
such as search will be not available. When enter the Tuning menu, Tuner Lock will be on
the screen, and the Timer will be the same with the main menu if no operation. If you want
to operate Tuning menu, you need to enter the Lock menu to set Tuner Lock Off or operate
UnLock.
Source Lock
Source Lock will control the ON or OFF ofhinder external input modes.
Press VOL+ button to set ason or off.
When the source lock is set as on, TV source will display, at this time, when press TV/AV,
S-VIDEO, DVD/DTV,PC/DVI button, theTV can not switch to corresponding source and
the Source Lock will display on the screen.
Preset Source
Preset Source is opted for setting up start source.
Press VOL+/-button to select Off, TV, AV1,AV2,S-Video,YPbPr/YCbCr, VGA, HDMI1,
HDMI2, VGA, USBin turn.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Lock Setup
Preset Channel
Preset Channel isopted for settingup preset channel.
Press CH+/- buttonto select presetChannel. Press VOL+/-button, to selectchannel
number.(The itemis not availableexcept TV signal.)
Child Lock
Press CH+/- button to select Child Lock.
Press VOL+/- button to set On or Off mode. If lock on mode is set, Child Lock
is in activated automatically. In such case, if Child Lock button (button on the
television) is pressed, the screen will display Child Lock, which can be
erased by press of MENU button. 5 seconds later after the latest press, the
screen display will disappear automatically. The Child Lock mode can be
resumed by entering Lock Set menu, set Child Lock On or Off.
Max Volume
Press CH+/- button to select Max Volume. Press VOL+/- button for
adjustment between 0 100. If a certain value is set, when volume is being
adjusted, the sound value can not exceed maximum volume value. If current
volume is over Max Volume, when Lock Set menu is set, current volume will
become set maximum volume. If current volume is below maximum volume,
customer set volume will stay unchanged.
UnLock
Press CH+/- button to select Unlock mode. Press VOL+/- button to unlock all
set modes, setting all lock options to off, and the maximum volume returns to
100.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Other functions
NICAM
Press the I/II button will resultin fast swapof NICAM function of currentprogram.
Display function
Press the DISPLAY button, then the channelnumber and
system will bedisplayed on thescreen.
Press the DISPLAY button again,it is disappear.
3
AUTO
B/G
STILL
Press the STILLbutton, the STILL will display on the screen,
at this time, the picture of TV is still, and press the STILL button
again, the picture will resume.
Sleep
The TV set will switch automatically to standby at the preset time with the SLEEP
timer on. You may set the sleep time.
each press of SLEEP button repeatedly on the remote control to select the number of
preset minutes, the time will be set in sequence: (off, 10, 20, 30,60, 90, 120,150,180).
To confirm the sleep time setting, press SLEEP and the remaining time will be displayed
for a few seconds.
To cancel the sleep time, press SLEEP repeatedly until the display turns to off.
Channel edit setup
1 Press CH.EDITbutton to open/closethe Channel Namemenu,
Note opens when automaticallywill select thecurrent channel
number.
Channel Name
No
0
1
2
3
4
5
6
7
------
------
------
------
------
------
------
------
2 Press CH+/-button to selectthe desired channelnumber, andthen
press OK buttonto confirm.
3 Press VOL+ buttonto move thecursor, andthen use CH+/-button
to alter theletter.
4 When you aresatisfied with yourchange, press theEXIT button to
return to normalviewing or pressMENU button to return to the
previous menu.
Scan
This function fast glances over the channels(Skip as off) which each searches.
Press the SCAN button to startfrom the currentchannel, and switch a channel every 3
seconds, after scanning, and the program channel stop the current channel.
If you wantto stop thefunction during auto tunning, simply press Scan or MENU button
again, at this time, the program will stop the program Finally glances over.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
Stream media play prepare
1. Supporting equipment
are used for internal files. This
television can only play some AVI
and MPG files of this format. Those
files with suffix of dat are not movie
files, but data files used by
computers, and cannot be played for
movies.
5.External card reader supports
most digital cards available in the
market. Readable digital cards are
classified according to the property
of card readers and can be
connected to mobile hard disks
(working voltage 5.0V, working
current not over500mA).
6. Some Time the television
operation may be halted due to
excessive rate of information code
errors. In such case, restart the
s y s t e m . A s t h e r e a r e m a n y
nonstandard USB mobile devices in
the market. If this kind of USB mobile
devices areused inthe streammedia
play system, the problem of
identification failure might occur.
The same problem may also happen
with computers, nottelevisions.
7.It is suggested that the external
devices with USB2.0 interface be
used to improve velocity of
information readingand continuityof
information play.
1.Equipment supporting Mass and
Storage agreements include USB,
mobile hard disk, card reader, some
MP3 anddigital camera.
2. Equipment supporting PTP
agreement includes some digital
camera.
2. 1 Supporting media:
picture, music, MPEG4, MPEG2
and MPEG1;
Supporting fileformat
*.Avi, *.DIVX,*.MPEG,*.DAT, *.MP3,
*.WMA, *.JPG and *.JPEG. Due to
particularity of file code and file mode,
It is possible that some files cannot be
read.
2 If Pic & Music mode is activated,
relative media file format will include
JPEG and MP3 files. After Picture is
selected, MP3 files set for play will
open both music and picture files for
sync play performance. As some files
must be read while music is being
played, thespeed ofpicture operation
response mightbe affected.
3.Before starting operation, verify
USB storage device is of FAT32 and
FAT filesystem format. At present, this
television does not support NTFS and
the file systemsof other format.
4.Many moviefiles usesuffix ofAVI and
MPG. However, many kinds of format
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
Stream media system setup
Note: Memory cards or USB devices are not supplied with this TV.
USB setup
1 Insert USB in the card slots at the front of TV.
2 Insert it to be clicked in.
3 Press USB button on the remote controller to enter the stream media system.
CARD setup
This TV is Compatible with the card of SD/MMC/CF/MS format.
How to use
1
Jack of cardInstructions
Jack of SM card
Note
1.Please note chooses uses
the digital memory card with
you corresponds the receptacle
2.Card reader in 1 cannot
simultaneously insert two kind
of cards in the graphical
representation position
Jacks of SD MMC MS card
Jack 1
Jack 2
Jack of CFcard
2
Insert the card as right direction. As following Card in common use
1
CF card
jack
3
MS card
jack
2
MMC card
jack
4
SDcard
jack
MULTIMEDIA
CARD
COMPACT FLASH
DIGITAL MEMORY CARD
128
SD
128MB
128
Note:
1.the card insertion time, after the flows media system starts 2s , insert the card
to numerical code card reader , do not bring card to start flow media system.
2. After card insertion, indicator light will shines, and enters glitters condition,
after period of time , indicator light enters constant bright condition, indicates
already distinguishes finished, this time carries on play operation and so on .
3, In the market ,the digital card type are very many, please uses standard
product of the standard factory , meets reads takes difficult or reads speed
limits, please replaces the digital card.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
Card data protection
- Do not remove the card/USB device when the content is being read or when
browsing. Such action may damage the memory card/USB device.
- Do not touch the terminals on the back of the card.
- Always insert a card in the correct direction. Failure to do so may result in
damage to thecard and theunit.
- Do notsubject the cardto excessive pressureor strong impacts.
- Malfunctions of the unit or card may result in data loss or damage to the card.
- Haier shall not accept any liability for damage or loss of stored data.
Warning:
Memory cards can be swallowed
by young children. Do not allow
children to handlememory cards.
Please remove thememory card
immediately after use.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To start the media play
1 Press the USB button on
the remote to enter
stream media system.
AAA
Multimedia Player
DEVICE
COPY
2 The system startup about
2 seconds, andthen insert
USB in thecard slots
DISPLAY
MUTE
POWER
PIC.SIZE
STILL I/II
SETUP
3 Press or to select the
desired item, andpress
ENTER button toensure it.
S-VIDEO DVD/DTV PC/DVI
TV/AV
Q.VIEW
OK
4 If to cancel the stream media system, press
EXIT button to return to the main menu, and
then press TV/AV button to select TV source.
CH+
VOL- MENU VOL+
CH-
Note: If thereare no operation two minute later, the
TV will enter the saver automatically, at the time, press
any button of USB system(with the exception of USB
button) to exit the saver menu.
SSM
PSM
1
2
3
4
7
5
6
9
8
ZOOM/MOVE
-/--
0
To operate the menu
PIP
SWAP SCAN CH.EDIT
1. Press or to select theitem with upor down.
H.LOCK TIME.SKIP
SHUTTLE SLEEP
2 Press
left or right.
or
to select the desired item of submenu with
USB
RETURN
3 Press ENTER button to ensure the desired option to
enter the submenu to resume the speed of standard.
ENTER
ZOOM
HELP
4. Press
or
button to operate play quickly or slowly.
5.Press button to make the program stop and press
again to resume it.
6.Press ZOOM button to make zoom, and press
or or button to enjoythe detail.
or
7
Press HELP button to callup or exitthe OSD information.
And press HELPbutton to callup or exitthe OSD during
operating file copy.
8 Press RETURN button to returnto previous menuand stop
play, press RETURN buttonrepeatedly to returnto main menu.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To select stream media broadcast system
1.Press or button to select
DEVICE item.
(The device be inserted and
identified).
AAA
Multimedia Player
DISPLAY
MUTE
POWER
PIC.SIZE
DEVICE
COPY
STILL I/II
2. Press ENTER buttonto enter
adjusted option.
S-VIDEO DVD/DTV PC/DVI
TV/AV
SETUP
Q.VIEW
OK
CH+
To play picture
VOL- MENU VOL+
Multimedia Player
AAA
DEVICE
COPY
CH-
1 Press
or
select Picture item.
button to
SSM
PSM
1
2
3
2 Press ENTER button to
enter the menu of play.
Picture
SETUP
4
7
5
6
9
8
3 Press or button to select
desired enjoy picture, and
then press ENTERbutton to
enter the play interface.
ZOOM/MOVE
-/--
0
Multimedia Player
AAA
PIP
SWAP SCAN CH.EDIT
DEVICE
COPY
H.LOCK TIME.SKIP
SHUTTLE SLEEP
Note you may playthe
pictures among selected.
SETUP
USB
RETURN
4 During playing picture, Press
HELP button to call up picture
menu, at thistime, you can
operate the picture of playing.
ENTER
ZOOM
HELP
AAA Multimedia Player
DEVICE
COPY
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
5 Press or or
or
button
to select theadjusted item,
Press ENTER buttonto
confirm.
SETUP
Note:
1.the play file menu are different
with your USB devices.
2. May carry on the programming
playing: repeated step 2 to choose
many documents, ( right key choice
or cancellation picture choice),
press ENTER to play, at this time,
the picture of play will be the picture
be choosed.
play or pause
stop;
overturn;press button to
right turns over 90
no available;
12 pictures scan;
print picture;
play previous picture;
play next picture;
Note: The analysis rate basis picture
itself clarity different and is different.
6 Press RETURN button to exit.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
Print Picture Setup
This machine has designed three printings pictures method.
Single picture printing, Programming printing, 12 pictures
browsing printing
DISPLAY
MUTE
POWER
PIC.SIZE
Single picture printing
1 Press
Picture option Press ENTER button
STILL I/II
Multimedia Player
AAA
DEVICE
COPY
/
button to select
S-VIDEO DVD/DTV PC/DVI
TV/AV
to enter the submenu
Q.VIEW
OK
Picture
2 Press
picture to print, press ENTER
/
button to select the
SETUP
CH+
VOL- MENU VOL+
button to enter playing menu.
CH-
3 During scanning pictures,
Press button to select the
Multimedia Player
AAA
SSM
PSM
DEVICE
COPY
picture, and then
button to select icon
/
/
/
, press
1
2
3
ENTER button to print picture.
4
7
5
6
9
SETUP
8
Programming printing
ZOOM/MOVE
-/--
0
PIP
SWAP SCAN CH.EDIT
1 To enter picture file menu later,
button to select or cancel
press
the file.
H.LOCK TIME.SKIP
SHUTTLE SLEEP
AAA Multimedia Player
DEVICE
COPY
2 when you are satisfied with your
choice press HELP buttonto call
up print menu, press ENTER button
to confirm.
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
USB
RETURN
ENTER
ZOOM
HELP
SETUP
12 pictures browsing printing
press
/
button to select
to enter.
the icon(
)
press
Press HELP buttonto cancel the OSD,
press button to select the
picture to print, press button to
/
Note:
the play filemenu are
different with your
USB devices.
confirm, Press HELPbutton again to
call up the OSD,
press
press
/ to select the icon
button to print the picture.
,
Note:
Selects the chart (
),press ENTER button to scan next 12 pictures;
Selects the chart ( ),press ENTER button to scan previous 12 pictures;
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To play Movie
1 Press
or
button to select
Multimedia Player
AAA
Movie option.
DEVICE
COPY
DISPLAY
MUTE
POWER
PIC.SIZE
2 Press ENTER toenter playing
menu.
STILL I/II
Movie
SETUP
S-VIDEO DVD/DTV PC/DVI
TV/AV
3 Press again or button to
select desired movie, and
press again ENTER to enter
the playing movie interface.
Q.VIEW
OK
Multimedia Player
AAA
CH+
DEVICE
COPY
VOL- MENU VOL+
4 During playing movie, Press
HELP button to call up picture
menu, at this time, you can
operate the movie of playing.
CH-
SETUP
SSM
PSM
1
2
3
4
7
5
6
9
8
AAA Multimedia Player
5 Press or or
to select theadjusted item,
Press ENTER buttonto
confirm.
or
button
ZOOM/MOVE
-/--
0
DEVICE
COPY
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
PIP
SWAP SCAN CH.EDIT
H.LOCK TIME.SKIP
SHUTTLE SLEEP
SETUP
: play or pause
: stop;
USB
: no available;
: zoom
: quickly
RETURN
ENTER
ZOOM
HELP
: slowly
: play previousmovie;
: play nextmovie;
Captions According to movie
document itself whetherhas the
captions to decide
Audio channel Mono, Stereo,
Left, Right
Play Mode Standard, RepeatAll,
Repeat File
6 Press RETURN button to exit.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To enjoy music
1 Press
or
Music option.
button to select
Multimedia Player
AAA
DEVICE
COPY
2 Press ENTER buttonto enter
play menu.
DISPLAY
MUTE
POWER
PIC.SIZE
Music
SETUP
3 Press or button to select
the desired music, and then
press ENTER button to the
playing music interface.
STILL I/II
S-VIDEO DVD/DTV PC/DVI
TV/AV
Multimedia Player
AAA
Q.VIEW
DEVICE
COPY
OK
Note: the play file menu are
different with your USB
device.
CH+
VOL- MENU VOL+
SETUP
CH-
4 When playing music, Press
or or
or
button to
SSM
PSM
select the adjusted item,
Press ENTER button to
confirm.
1
2
3
4
7
5
6
9
AAA Multimedia Player
DEVICE
COPY
: play or pause
: stop;
8
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
: No available
: Display or Close the OSD
: Quickly
ZOOM/MOVE
-/--
0
PIP
SWAP SCAN CH.EDIT
SETUP
: Slowly
: play previous music;
: play next music;
H.LOCK TIME.SKIP
SHUTTLE SLEEP
USB
Play Mode Standard,Repeat File,
Repeat All
RETURN
ENTER
ZOOM
HELP
Press or button to select
the desired mode, and then
press ENTER button to confirm.
5 Press RETURN buttonto exit
the playing.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To select the Music and PIC item
1Press
or
button to select
Multimedia Player
AAA
DEVICE
COPY
Music and Picoption, and
press ENTER button to enter
play menu.
DISPLAY
MUTE
POWER
PIC.SIZE
STILL I/II
SETUP
Comb
2 Press or to select desired
file(picture and music), and
press ENTER button to enter
play menu.
S-VIDEO DVD/DTV PC/DVI
TV/AV
Q.VIEW
OK
Multimedia Player
AAA
CH+
DEVICE
COPY
3 During playing music, Press
HELP button to call up picture
menu, at this time, you can
operate the movie of playing.
VOL- MENU VOL+
CH-
SETUP
SSM
PSM
1
2
3
4 Press or or
or
button
4
7
5
6
9
to select theadjusted item,
Press ENTER buttonto
confirm.
8
AAA Multimedia Player
DEVICE
COPY
ZOOM/MOVE
-/--
0
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
PIP
SWAP SCAN CH.EDIT
H.LOCK TIME.SKIP
SHUTTLE SLEEP
play or pause
stop;
SETUP
: No available
: No available
: No available
: No available
: play previous music;
:play next music;
USB
RETURN
ENTER
ZOOM
HELP
5 Press repeatedly RETURNbutton
to return.
Note: Under music and picture condition, because the
system reads thetime of picture more longer than reads
the time of music , therefore in the broadcast process,
the picture appears the time lag to the music, this belongs
to the normal phenomenon.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To select text
1Press
text option, and press ENTER
button to enter text menu.
or
button to select
Multimedia Player
AAA
DEVICE
COPY
DISPLAY
MUTE
POWER
PIC.SIZE
STILL I/II
SETUP
Text
2 Press or to select desired
text, and press ENTER button
to confirm.
S-VIDEO DVD/DTV PC/DVI
TV/AV
Q.VIEW
OK
Multimedia Player
AAA
3 Press or or
to watch thetext.
or
button
CH+
DEVICE
COPY
VOL- MENU VOL+
4 Press repeatedly RETURN
button to return.
CH-
SETUP
SSM
PSM
1
2
3
/
4
7
5
6
9
Rolls reads the text
8
AAA Multimedia Player
DEVICE
COPY
/
ZOOM/MOVE
-/--
0
F-007 .txt
F-008 .txt
F-009 .txt
F-010 .txt
F-011 .txt
F-012 .txt
PIP
SWAP SCAN CH.EDIT
Previous page/next page
H.LOCK TIME.SKIP
SHUTTLE SLEEP
SETUP
USB
RETURN
ENTER
ZOOM
HELP
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
Copy file function
1 Press or to select Copy item.
AAA
Multimedia Player
DEVICE
COPY
DISPLAY
MUTE
POWER
PIC.SIZE
2 Press ENTER buttonto enter
the copy menu.
STILL I/II
S-VIDEO DVD/DTV PC/DVI
TV/AV
3 Press or button to selectthe
desired item ofcopy.
SETUP
Q.VIEW
OK
4 Press HELP button to callup
Copy, Paste and delete, and
then press or button to select
Copy, and press ENTER button
to confirm.
CH+
Multimedia Player
AAA
VOL- MENU VOL+
DEVICE
COPY
CH-
SSM
PSM
5 To select a folder, then Press
ENTER button to enter, and then
press HELP button to call up
Paste item, PressENTER button
to confirm.
1
2
3
SETUP
4
7
5
6
9
8
ZOOM/MOVE
-/--
0
6 If there arethe same texts
between the textsof paste, the
File already exist! Do you want
Overwrite it? will display on
the screen, atthis time, press
PIP
SWAP SCAN CH.EDIT
AAA Multimedia Player
DEVICE
COPY
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
H.LOCK TIME.SKIP
SHUTTLE SLEEP
USB
or
button to selectthe
SETUP
RETURN
desired item, PressENTER
button to confirm.
ENTER
ZOOM
HELP
7. Press ENTER tocancel.
AAA Multimedia Player
DEVICE
COPY
F-007 .JPG
F-008 .JPG
F-009 .JPG
F-010 .JPG
F-011 .JPG
F-012 .JPG
Copy
Paste
Delete
SETUP
Note:
RIGHT button toselect
the all files;
LEFT button tocancel.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
To select language
1 Press or to select
SETUP item.
AAA
Multimedia Player
DEVICE
COPY
DISPLAY
MUTE
POWER
PIC.SIZE
2 Press ENTER button to
enter SETUP menu.
SETUP
STILL I/II
S-VIDEO DVD/DTV PC/DVI
TV/AV
3 Press or to select
language option, and then
press ENTER button to
enter the submenu.
Q.VIEW
OK
Multimedia Player
AAA
DEVICE
COPY
CH+
Language
Slideshow Model
Set Printer
VOL- MENU VOL+
CH-
SETUP
4 Press or to select
desired language, and
press ENTER to ensure
it.
SSM
PSM
1
2
3
4
7
5
6
9
AAA Multimedia Player
DEVICE
COPY
8
English
Chinese
5 Press RETURN button to
return.
ZOOM/MOVE
-/--
0
PIP
SWAP SCAN CH.EDIT
SETUP
H.LOCK TIME.SKIP
SHUTTLE SLEEP
Slideshow Model
USB
1 After entering theSETUP menu.
RETURN
AAA Multimedia Player
DEVICE
COPY
ENTER
ZOOM
HELP
Language
2 Press or to select
Slideshow Model
Set Printer
Slideshow Model option,
and then press ENTER
button to enter the submenu.
SETUP
3 Press or to select
desired mode, and press
ENTER to ensure it.
Multimedia Player
AAA
DEVICE
COPY
Fine Model
Normal Model
4 Press RETURN button to
return.
SETUP
Fine Model
Picture clarity high, the
browsing speed is slow
Normal Model
Picture clarity normal, the browsing speed is quick
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream media broadcast system
Set Printer
1 Press or to select
SETUP item.
AAA
Multimedia Player
DEVICE
COPY
DISPLAY
MUTE
POWER
PIC.SIZE
2 Press ENTER button to
enter SETUP menu.
SETUP
STILL I/II
S-VIDEO DVD/DTV PC/DVI
TV/AV
3 Press or to select Set
Printer option, and then
press ENTER button to
enter the submenu.
Q.VIEW
OK
AAA
Multimedia Player
CH+
DEVICE
COPY
Language
VOL- MENU VOL+
Slideshow Model
Set Printer
CH-
SETUP
SSM
PSM
4 Press or to select
desired language, and
press ENTER to ensure
it.
1
2
3
4
7
5
6
9
AAA
Multimedia Player
8
DEVICE
COPY
ZOOM/MOVE
-/--
0
Set Papersize
5 Press RETURN button to
return.
PIP
SWAP SCAN CH.EDIT
Set Print number
H.LOCK TIME.SKIP
SHUTTLE SLEEP
SETUP
USB
RETURN
ENTER
ZOOM
HELP
AAA Multimedia Player
DEVICE
COPY
One
Two
Three
Four
Five
Ten
SETUP
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
- Early malfunctions can be prevented. Careful and regular cleaning can
extend the amount of time you will have your new TV. Be sure to turn the power
off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1. Here`s agreat way tokeep the dustoff your screen for awhile. Wet a soft clothin a
mixture of lukewarmwater and alittle fabric softeneror dish washingdetergent. Wring
the cloth untilit`s almost dry, and thenuse it towipe the screen.
2. Make surethe excess wateris off the screen, andthen let itair-dry before youturn on
your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure
not to use a wet cloth.
Extended Absence
If you expectto leave yourTV dormant for a longtime (such asa vacation), it`sa good
idea to unplugthe power cordto protect againstpossible damage fromlightning or
power surges.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
For the sake of time and cost, it is strongly recommended that you check out
the problem byyourself according tothe instructions listedhereunder before
contacting the after-sales service for technical assistance.
Problem
Possible remedies
Turn on the power supply;
No picture,
no sound
Properly plug the TV set to the power socket;
Check to see if the power cable of other appliance is
plugged in the TV set. Make sure that the power cable
of the TV set is properly connected.
Good picture,
no sound
Depress the volume button;
Check out the audio frequency input signals.
Check to see if the remote controller display
receiving window are blocked by other objects and
if batteries are properly loaded.
Failure of remote
controller
Designate the item of color from the Picture menu
and depress the volume button;
No color, weak
color or poor picture
Keep the display and VCR separate a reasonable space;
Activate some functions to store picture brightness;
Make sure that the display and signal source are
available and turned on.
Excessive brightness
or darkness
Adjust brightness or contrast.
Picture too big or small
One speaker failure
Adjust the setup of sizes.
Balance the sound in the menu.
It is a normal phenomenon.
Slight sound from display
Note: Do not leave the television with static picture in an extended period as it may
result in residual image on your television screen.
Note: Production of the screen requires high and precision technologies. However,
there might be some dark or bright (red, blue or green) spots, or some anomalistic stripes or
spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where
the air pressure is below 750hpa, the picture on the screen may be affected and a muffled sound
might be produced. These phenomena might happen in the area 1,500 meters above the sea
level. This is resulted from difference between air pressures inside and outside the display. This
is not a defect covered by the limited warranty.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Basic specification and parameter
Model
P50A11-AK
~ 15 -240
P60A11-AK
Power
Power Consumption
Color System
Sound System
Video input
PAL NTSC, SECAM
D/K B/G, M
I
AV CVBS , S-VIDEO, YPbPr/YCbCr, HDMI or DVI VGA
Operating temperature range:5
Operating humidity range 20%-80%
Storage Temperature: -15 +45
Storage Humidity 5%-90%, non-condensing
+35
Environmental
condition
If the storage temperature is lower than 0 , please first lays the machine
aside after in the operating temperature environment carries on restores
2 hours, then electrifies the use again, protects your television not to
receive the damage.
Use`s manual
Remote Control
Maintenance card
Power cable
X1
x1
x1
x1
x2
Accessories
Alkaline
Product main size (does not contain stand & speaker)
Model
Net Size
Net Weight
49Kg
P50A11-AK
P60A11-AK
1240x398x893mm(stand included)
1454x398x1012mm(stand included)
63Kg
NOTE
Design and specifications are subject to change without notice.
The dimension in this manual is a approximation.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Format
Recommendatory HDTV/SDTV(YPbPr/YCbCr) format
Sequence
Number
Refresh Frequency
Format
Hz
480i/480p
576i/576p
60
50
50/60
50/60
720p
1080i/1080p
Recommendation PC connection input format:
sequence
V-Frequency
Hz
H-Frequency
KHz
Format
number
640*480@60Hz
31.5
60
60
60
60
60
37.88
48.36
63.9
75
800*600@60Hz
1024*768@60Hz
(Recommendatory)
1280*1024@60Hz
1600*1200@60Hz
Recommendation HDMI connection input format:
Recommendation DVI connection input format:
Sequence
Number
Sequence
Number
Refresh Frequency
Hz
Refresh Frequency
Hz
Resolution
640*480
Format
60
60
60
60
60
480i/480p
50
576i/576p
800*600
50/60
720p
1024*768
1280*1024
50/60
1080i
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|