Haier Flat Panel Television P42A9 AKS User Manual

PLASMA TV

OWNER`S MANUAL

MODELS:P42A9-AK

Please READ this manual carefully before

operating your TV, and retain it for future

reference.

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Safety Instructions

Important safeguards for you and your new product

Your product has been manufactured and tested with your safety in mind. However, improper

use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have

been built into your new product, please read and observe the following safety points when

installing and using your new product, and save them for future reference.

1. Retain these Instructions ---The safety and operating instructions should be retained for

Future reference.

2. Heed Warnings ---All warning on the appliance and in the operating instructions should be

followed.

3.Cleaning --- Unplug from the wall outlet before cleaning. Do not use liquid cleaners or

Aerosol cleaners. Use only dry cloth for cleaning.

4. Attachments --- Do not use attachments

not recommended by the manufacturer as they may cause Hazards.

5. Water and moisture -- Do not place this product near water, for example, near a bathtub,

wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

6. Do not place this unit on an unstable cart, stand, tripod, bracket, or table. Use

only with a cart, stand, tripod, bracket, or table recommend by the manufacture, or sold with

the unit.

7. Ventilation ---Slots and openings in the cabinets and the back or bottom are provided for

Ventilation and to ensure reliable operation of the product and to protect it from overheating,

and these openings must not be blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug, or other similar surface. This product

should not be placed in a built-in installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer`s instructions have been adhered to.

8. Power Source ---This unit should be operated only from the type of power source indicated on

the rating label. If you are not sure of the type of power supply to your home, consult your

Appliance dealer or local power company.

9. Grounding or polarization ---Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet. To prevent electric shock, ensure the

Grounding pin on the AC cord power plug is securely connected.

10. Power cord protection ---Power supply cords should be routed so that they are not likely to

Be walked on or pinched by items placed upon or against them. Pay particular attention to

cords or plugs, convenience receptacle, and the point where they exit from the appliance.

11. Lighting precaution ---For added protection for this product during a lighting storm or when

it is left unattended for long period of time, unplug it from the wall outlet and disconnect the

antenna or cable system. This will prevent damage to the product due to lighting and

power line surges.

PORTABLE CARTWARNING

12. Accessories--- Never push objects of anykind into this product through

(symbol provided by RETAC)

openings as they may touchdangerous voltage point or shortout parts

that could result in afire or electric shock.Avoid spilling liquid of any kind

on the product.

13. Servicing ---Do not attempt to service the product by yourself, as opening

or removing covers may expose you to dangerous voltage or other hazards.

Refer all servicing to authorized service personnel.

S3126A

14.Damage Requiring Service ---Unplug this unit from the wall outlet and

refer servicing to qualified service personnel under the Following conditions:

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Safety Instructions

a. When the power supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have been fallen into the unit.

c. If the unit has been exposed to rain or water.

d. If the unit does not operate normally by following the operating instructions. Adjust only

those controls that are covered by the operating instructions, as improper adjustment of

other controls may result in damage and will often require extensive work by a qualified

technician to restore the unit to its normal operation.

e. If the unit has been dropped or damaged in any way.

f. When the unit exhibits a distinct change in performance; this indicates a need for service.

15.Heat --- The product should be situated away heat source such as radiators, heat registers,

stoves, or other products (Including amplifiers) that product heat.

16.Overloading ---Do not overload wall outlets and extension cord as this can result in a risk of

Fire or Electric shock.

17. Outdoor antenna grounding---If an outside antenna or cable system is connected to

the unit, be sure the antenna or cable system is grounded to provide some protection

against voltage surges and built-up static charges, Section 810 of the National Electrical

Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

ELECTRIC SERVICE EQUIPMENT

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H)

Note: The PDP Manufacturing Process: afew minute coloreddots may be

present on thePDP screen

The PDP (Plasma Display Panel), which is thedisplay device ofthis

product is composedof 0.9 to2.2 million cells. A few cell defectswill normally

occur in thePDP manufacturing process. Several tiny, minute coloreddots

visible on thescreen should beacceptable. This alsooccurs in otherPDP

manufacturers' products. Thetiny dots appearingdoes not meanthat this

PDP is defective. Thus afew cell defectsare not sufficientcause for thePDP

to be exchangedor returned. Ourproduction technology minimizesthese cell

defects during themanufacture and operationof this product.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Warning .............................................

Important Safety Instructions................

Sound menu..............................................

To choose sound modes ..........................

Balance.................................................

Setting Five Equalizer sound ...................

Setting the surround sound ......................

Setting the Auto Volume...........................

Setting the woofer sound.........................

How to eliminate sound ...........................

Timer menu...............................................

Timer setting .........................................

On/off time\Timer on Prog\Timer Prog ......

Function menu..........................................

Function setup ......................................

Adjust menu .............................................

To choose picture aspect ration ...............

H-Position and V-Position adjust .............

RGB/Default/Auto Sync ..........................

Color Temperature .................................

Black Stretch .........................................

Lock setup................................................

Picture in Picture ......................................

Other functions.........................................

Teletext functions......................................

Stream media broadcast system.................

Maintenance............................................

Specifications and functions......................

Troubleshooting.......................................

Accessories .....................................

buttons and interfacelocation..............

Front control panel............................

Rear control panel.............................

Remote controller................................

Keys of remote controller.....................

Function introduction .......................

Effective range ...............................

External Equipment Connections........

Operation

Set up your TV...................................

Switching ON/OFF theTV set...........

Choose the MenuLanguage.............

Select input modes............................

Tuning menu......................................

Auto search.....................................

Program Table ....... ........................

Manual search................................

Fine Tuning.....................................

How to select the desired program.......

Edit Name.......................................

Skip...............................................

Program swap.................................

Picture menu ....................................

How to select picture modes.............

Noise Reduction .............................

Accessories

Ensure that the following accessories are included with your PDP display. If an

accessory is missing , please contact the dealer where you purchased the product.

MUTE

SCAN

STILL

SLEEP

DISPLAY

PLASMA TV

OWNER`S MANUAL

MODELS:P42LV6-HD

P50V6-A8

Please READ this manual carefully before

operating your TV, and retain it for future

reference.

TV/AV

P.STD

SWAP

S.STD

CH+

VOL-

CH-

VOL+

Batteries X 2

H.LOCK

EXIT

Owner s Manual X 1

CH.LIST

TIMER ZOOM

Remote Control X 1

Download from Www.Somanuals.com. All Manuals Search And Download.

Buttons and interface location

-This is a simplified representation of front panel.

-Here shown maybe somewhat different from yourTV.

Front control panel

TV/AV MENU

POWER

- CH +

- VOL +

Buttons and functions

Channel number increase and decrease.

Volume decrease:

for lowering the volume or adjusting the menu.

Volume increase: for enhancing the volume or adjusting the menu.

TV/AV button

Menu button

Power and indicator: for turning on or off the power supply.

Remote receiving window

Card jack

Download from Www.Somanuals.com. All Manuals Search And Download.

Buttons and interface location

Rear Control panel

USB Socket

VIDEO Input

Connects the videosignal

from a videodevice.

VIDEO

AUDIO Input

connect to hear

AUDIO

stereo sound froman

external device.

Switch power on/off

Power Cord Socket

This TV operates on AC power.

The voltage is indicated on

POWER

the specifications page.

Never attempt to operate the

TV on DC power

VGA IN

COMPONENT IN

DVI IN

SCART2

SCART1

VGA

AUDIO

Pr/Cr

Pb/Cb

L-AUDIO-R

HDMI/DVI VIDEO

AUDIO

ANT IN

AUDIO OUT

1. AUDIO OUT: Connect to optionalexternal speaker(s).

2.VGA IN(PC)

Connect VGA analog cable from the PC tothe VGA IN. Connect the audio cable from the PC

to the VGAAUDIO IN.

3.COMPONENT IN

Connect the component cables from the component output of the video device to

COMPONENT IN. Connect the audio cable from the video device to the

COMPONENT AUDIOIN.

4.DVI IN(HDMI-IN)

Connect the HDMI cable from the HDMI output of the digital video device to the HDMI/DVI

VIDEO.(If the PChas DVI only,Connect the audio cable from the digital video device to the

AUDIO .)

5-6.SCART2/SCART1

Used to connect to the DVD/ VCR/ broadcasting receiver or other equipment.

7.Earphone port

8.ANT IN: Connect antenna orCATV 75 coaxial cable toreceive TV/CATV signal.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote controller

Inserting Batteries

1.Slide open the

cover of thebattery

compartment on the

back of theremote

controller.

2.Load twoAA alkaline

3.Replace the coverof the

battery compartment.

batteries in thecompartment.

paying attention tothe polarity

diagram in thebattery

compartment.(plus and minus

poles to respectivemark)

Precautions

Make sure thattwo AAalkaline batteries

are loaded. The batteries mustbe of the

same type. The batteries mustbe located

properly. The batteries are not

rechargeable.

As strong lightmay interfere the

signals, change yourposition to

operate the remotecontroller if

the television cannotbe turned

on or off as youexpect.

Make sure thatthere is noobstacle between

the remote controllerand television set.

Keep the remotecontroller away from

heat source orhumid area toensure

effective performance of the remote

controller.

Download from Www.Somanuals.com. All Manuals Search And Download.

Keys of remote controller

- The remote controller cannot be operated unless the batteries are properly loaded.

- When using the remote control, aim it at the remote control sensor on the TV.

Function introduction

STILL

Picture static

I/II (NICAM)

PIP

SLEEP

Displaying sleep time,

adjustable

Power Off/Standby

any other programmed

equipment off.

MUTE

SCAN

STILL

MUTE

Switches the sound on or off

DISPLAY

SLEEP

PIP

SCAN

Program scan button

DISPLAY

Display ON/OFF

ABC@

DEF

Digits

GHI$

MNO

JKL%

Program direct option(when edit

program, every press can set

different sign by turns among the

digits and sign on top of them)

TV/AV

Input source display

POR&

STUV

*#()

WXYZ

P.STD

(Picture mode option)

TV/AV

SWAP

Switch the current channel to the

last channel you have viewed.

P.STD

S.STD

sound increase

and decrease

CH+

CH-

S.STD

(Sound mode option)

VOL-

VOL+

Program up and down

Or turns your TV

main menu entry, menu exit or

return to nexthigher level menu.

Teletext buttons

buttons which have letters

on top also can use in TV.

Lock button

(enter the Lock Set menu)

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

EXIT

clears all on-screen displays and

returns to TV viewing from any menu.

Channel list button

TIMER

Time display(only when

there is teletext in TV)

ZOOM

Adjust picture aspect ratio

Note:

This User's Manual covers the functions of the remotecontroller, including CH+/-,

VOL-/+, MENU, TV/AV and POWER keysfor control ofprogram up, program down,

volume decrease, volume increase, menu, TV/AV and power ON/OFF.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote controller

Effective range

above

below

right

left

front 8m

MUTE

SCAN

STILL

SLEEP

PIP

DISPLAY

ABC@

DEF

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

TV/AV

SWAP

P.STD

S.STD

CH+

CH-

VOL-

VOL+

H.LOCK

EXIT

CH.LIST

Ensure the remote controller is pointed toward the remote

controller window on the display.

No obstacles should be placed between the remote controller

and the remote controller window.

The effective receiving scope for the signal is 8 meters to the

front of the remote controller window, and 45^Oto the left or right

side and 20^Oabove or below the control window.

Use of remote controller:

1. To ensure a normal operation, the remote controller should not

be dropped or damaged in any way .

It should alsobe kept dryand away fromall heat sources.

2. Battery replacement is necessary when the remote controller

acts inconsistently or stops operating the plasma display.

Download from Www.Somanuals.com. All Manuals Search And Download.

External Equipment Connections

Antenna Connection

Generally speaking, to enjoy a clearer picture, we recommend that you use a

CATV system or an outdoor antenna .In different places, the suitable antenna

type and position are different.

outdoor

antenna

Mixer

additional

purchase

Antenna input

75 standard

coaxial type

ANT IN

75 coaxial cable

300 twin-lead cable

Plug

(additional purchase)

Antenna adapter

Note

* It isrecommended that you'dbetter use 75 coaxial cable toremove the

disturbance caused byairwave.

* Don't bindantenna cable andelectric wire together.

If the antennaneeds to besplit for twoTv`s, install a

2-WaySignal Splitter in the connections.

If the antennais not installedproperly, contactyour

dealer for assistance.

Toimprove picture qualityin a poorsignal area,

purchase and installa signal amplifier.

Download from Www.Somanuals.com. All Manuals Search And Download.

External Equipment Connection

NOTE: All cables shown are not included with the TV.

Choose Your Connection

There are severalways to connectyour television, dependingon the componentsyou

want to connectand the qualityof the signalyou want toachieve. The following are

examples of someways to connectyour TV.

Choose the connectionwhich is bestfor you.

VCR connection

- To avoid picturenoise (interference), leavean adequate distancebetween the VCR

And TV.

1. Connect the SCART cables from

the VCR's outputjacks to theTV`s

input jacks, asshown in thefigure.

COMPONENT IN

2. Insert a videotape into theVCR and

SCART2

SCART1

ANT IN

Pr/Cr

Pb/Cb

L-AUDIO-R

press PLAY on the VCR. (Referto the VCR

owner`s manual.)

3. Select theinput source

by the TV/AV button

on the remotecontrol.

S-VIDEO

Download from Www.Somanuals.com. All Manuals Search And Download.

External Equipment Connections

DVD connection

How toconnect

1. Connect the DVD video outputs (Y,

Pb/Cb, Pr/Cr) tothe YUV IN jacks onthe TV

and connect the DVD audio outputs to the

AUDIO IN jacks on theTV, as shown inthe

COMPONENT IN

figure.

2. If your DVD only has an SCART output

SCART2

SCART1

ANT IN

Pr/Cr

Pb/Cb

L-AUDIO-R

jack, connect this to the SCART input on

the TV. as shown in thefigure.

NOTE: If your DVD player does not have

component video output,use S-Video.

How touse

1. Turn on the DVD player, insert a DVD.

2. Use theTV/AVand VOL+/- buttonon the

remote control toselect SCARTmode.

3. Press Play buttonon external equipment

for program play.

4. Refer to the DVD player's manual for

operating instructions.

DVD

DTV connection

-To watch digitally broadcast programs,

purchase and connecta digital set-topbox.

How toconnect

VGA IN

COMPONENT IN

DVI IN

Use theTV`s YPbPrIN andAUDIO IN jacks,

VGA or HDMI/DVI VIDEO port for video

connections, depending on your set-top

box connections available.Then, make the

corresponding audio connections.

How touse

HDMI/DVI VIDEO

VGA

AUDIO

Pr/Cr

Pb/Cb

L-AUDIO-R

AUDIO

1. Turnon the digitalset-top box. (Referto

the owner`s manual for the digital set-top

box.)

2. Use TV/AV on the remote control to

select DVI mode.

3.Press Play buttonon external equipment

for program play.

HDMI/DVI OUTPUT

AUDEO

RGB-DTV OUTPUT

AUDEO

Digital Set-top Box

Download from Www.Somanuals.com. All Manuals Search And Download.

External Equipment Connections

PC connection

How toconnect

1. To get the best picture quality, adjust the PC

graphics card to(>1024 x768),60Hz.

or DVI source.

4. Check theimage on yourTV.There may

be noise associated with the resolution,

vertical pattern, contrast or brightness in

PC mode. If noise is present, change the

PC mode to another resolution, change

the refresh rate to another rate or adjust

the brightness and contrast on the menu

until the pictureis clear.If the refreshrate

of the PCgraphic card cannot be changed,

change the PCgraphic card orconsult the

manufacturer of thePC graphic card.

NOTES:

2. Use the TV`s VGA IN

port for video

connections, depending onyour PC connector.

If the graphic card on the PC does not output

analog and digitalRGB simultaneously, connect

only one ofeitherVGAIN to display thePC on the

TV.

If the graphic card on the PC does output

analog and digital RGB simultaneously, set the

TV to either VGA; (the othermode is setto Plug

and Play automaticallyby theTV.)

1 Use a VGAcable.

3. Then, make the corresponding audio

connection. If usinga sound card,adjust the PC

sound as required.

How touse

1. Turnon the PCand theTV.

2. Turn on the display by pressing the POWER

button on theTV's remotecontrol.

3. UseTV/AVon the remotecontrol to select PC.

2 Avoid keeping afixed image onthe TV's

screen for along period oftime. The fixed

image may become permanently

imprinted on thescreen.

3 The synchronization input form for

Horizontal and Vertical frequencies is

separate.

VGA IN

VGA

AUDIO

AUDIO OUT

Resolution

Line

frequency

(Khz)

Frame

frequency

(Hz)

Resolution

Mode

VGA

640*480

800*600

1024*768

31.5KHz

37.9KHz

48.4KHz

60Hz

SVGA

XGA

Download from Www.Somanuals.com. All Manuals Search And Download.

External Equipment Connections

- The following chart illustratesonly, please with yourkind is purchased.

Loudhailer

Connect Loudhailer

1. Face the PDP screen upside down on a

clean blanket or a bracket and pay

attention not to indent the casing. Lay the

two speaker aside of the PDP.

2. Lay annectent bracket on the speaker

and hind rind, Fix the screws to the speaker

and hind rind.

3. Connect the speaker cable to the

speaker terminal of PDP TV and the

Annectent

speaker terminal, and insert the

bracket

connecting cable intothe terminal slot,

Release the speakerterminal, and ensure

that the white connecting cable is inserted

in the terminalslot marked redand black

connecting cable isinserted in theblack

terminal slot, and that anode and cathode

poles are correctly connected.

AUDIO OUT

WOOFER

Connect Woofer

1. Take the wooferout, and placeit the hindrind. (See picture)

2. Connect cable tothe woofer terminal and PDPTV terminal,

and insert theconnecting cable intothe terminal slot.

Woofer

AUDIO OUT

WOOFER

Download from Www.Somanuals.com. All Manuals Search And Download.

External Equipment Connections

Connecting Headphones

You can connect a set of headphones to your set if you wish to watch a

TV programme withoutdisturbing the otherpeople in theroom.

Plug a set of headphones into the 3.5mm

mini-jack socket on the rear panel of the set.

Note

Prolonged use of headphones at a high volume

may damage your hearing.

SWITCH

AC-INPUT

ANT IN

You will not receive sound from the speakers

when you connect headphones to the system.

Power source

TO USE AC POWER SOURCE

Use theAC polarized linecord provided for

operation onAC. Insert theAC cordplug into

a standard polarizedAC outlet.

AC Outlet

Wider Hole

and Blade

NOTES:

Never connect theAC line cord plug toother

than the specifiedvoltage. Use the

attached power cordonly.

If the polarizedAC corddoes not fitinto a non-

polarized ACoutlet, do notattempt to fileor cut

the blade. Itis the user`sresponsibility to have

an electrician replacethe obsolete outlet.

If you causea static dischargewhen touching

the unit andthe unit failsto function, simply

unplug the unitfrom theAC outlet andplug it

back in. The unit shouldreturn to normaloperation.

Polarized AC Cord Plug

Download from Www.Somanuals.com. All Manuals Search And Download.

Set up your TV

-There are severaloptions you mightneed to setup in orderfor your TV to work

properly. Read the instructions that follow.

-In the manual, the OSD(on screendisplay) may bedifferent from your TV`s,

because it is just an example to help you with the TV operation.

Switching ON/OFF the TV set

1 Please press down the power switch to

switch on AC power supply and the power

indicator will light .

2 If the indicator is lighting in red, press

button on the remote controller again.

3 If you want to exchange to standing by

status, please press down button on the

remote controller.

4 Disconnect the power supply or unplug the

television if it is intended to completely cease

the television performance.

Choose the Menu Language

When you start using your set for the first time,

you must select the language which will be

used for displayingmenus and indications.

CH+

1 Press the MENU and CH+/-button to select

the Function menu.

2 Press VOL+ to enter.

3 Press CH+/-button to select Language.

4 Select a particular language by pressing

VOL+/- button repeatedly.

VOL-

CH-

VOL+

You can choose oneof 13 languages.

5 When you are satisfied with your choice,

press MENU button to return to previous or

press EXIT button to return to TV viewing.

Download from Www.Somanuals.com. All Manuals Search And Download.

Select input modes

Choose the input source

If you hope to enjoy the picture from the external

input source, before to select the source, you need

to connect thedevices, otherwise, whenyou select

the source, the none or no signal will appears on the

screen.

MUTE

SCAN

STILL

Press TV/AV button on the remote

control, the menu appears on the

screen. Then press CH+/- to select

the TV item, and press VOL+ to

ensure it.

Source

DISPLAY

SLEEP

PIP

SCART1

SCART2

ABC@

DEF

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

HDTV

VGA

TV/AV

SWAP

HDMI

USB

P.STD

S.STD

CH+

CH-

TV: the inputsource fromANT IN terminal output.

SCART1: the input source from SCART1 terminal

output.

VOL-

VOL+

SCART2: the input source from SCART2 terminal

output.

AV the input source from side AV terminal output.

HDTV: the inputsource from YPbPr terminal output.

PC: the inputsource from VGAIN terminal output.

HDMI: the input source from HDMI IN terminal output.

USB: the input source from USB terminal output.

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

Before watching TV program, you need to ensure

your TV in TV mode.

Memory function

When menu parameter is to be modified, the set

picture and sound status and preset program will

be remembers as menu exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuning menu

This TV set has three methods to set channels, which are respectively full automatic,

manual search fine tune.

In this section, how to use the remote control to set channel is explained. You can

also use buttons on the TV set to set channel.

Full automatic search mode

Automatic search

1 Press MENU button and then CH+/- button, the icon to

TUNING menu.

MUTE

SCAN

STILL

2 Press the VOL+/- buttons to enter submenu, and press

CH+/- button to select "country" first according to yourself

that means you have selected the sound system, this is

useful especially for France ), and then press CH+/-

button to select "Auto Search" item.

DISPLAY

SLEEP

PIP

ABC@

DEF

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

TV/AV

SWAP

P.STD

S.STD

CH+

CH-

VOL-

VOL+

PICTURE

Tuning Program

AUDIO

Country

England

ADJUST

TUNING

FUNCTION

TIMER

Auto Search

Program Table

PIP Source

PIP Position

HDMI/DVI

Center

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

Note : the TUNING menu will be only operated in normal

TV mode.

3Press the VOL+/- button to ensure automatic search

with higher level.

Note:

If you have set Tuner Lock

in Lock Set menu. Password

must be entered when

VHF-L 188.16 MHz

operating menu tuning.

Otherwise there will be Tuner

Lock display on screen.

After the search has finished, all channels now playing

program will be automatically preset in order.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuning menu

Program Table

Press MENU button and then CH+/- button, the icon to

TUNING menu.

Press VOL+/- button to

enter submenu, and press

CH+/- button to select

"Program Table", press

VOL+ button to enter.

Or press CH.LIST button

on remote controller.

MUTE

SCAN

STILL

PICTURE

Tuning Program

Country

AUDIO

England

DISPLAY

SLEEP

PIP

ADJUST

TUNING

FUNCTION

TIMER

Auto Search

Program Table

PIP Source

HDMI/DVI

Center

ABC@

DEF

PIP Position

GHI$

JKL%

MNO

Press CH+/- button to

POR&

STUV

*#()

WXYZ

select the edited channel,

and press button

TV/AV

SWAP

Program Table

corresponding to edit.

001

002

003

004

005

006

007

008

009

010

P.STD

S.STD

(Red button: delete channel;

Green button: copy channel;

Yellow button: Name channel;

Blue button: Swap)

CH+

CH-

VOL-

VOL+

Red: Del; Green: copy; Yellow:Name; Blue: Swap

delete name

H.LOCK

EXIT

Press CH+/- toselect the channel, and press thered button

on the remotecontroller to delete, then press MENU button

to delect name.

CH.LIST

TIMER ZOOM

Copy channel

Press CH+/- toselect the channel, and press thegreen button

on the remotecontroller, thenpress CH+/- buttonto select

the channel tocopy, press again thegreen button thenpress

MENU button to ensure.

Name channel

Press CH+/- toselect the channel, and press theyellow button

on the remotecontroller, andpress the yellowbutton to display

the digital andletter list, pressVol+/- orCH+/- to selectthe

desired digital orletter, pressthe yellow buttonto exit list,

then press MENU button to ensure.

Swap channel

Press CH+/- toselect the channel, and press theblue button

on the remotecontroller, thenpress CH+/- buttonto select

the channel toswap, then pressagain the blue button to

ensure.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuning menu

Manual search

If excessive channel signals of unwanted programs

are received in local area, manual search function is

recommended.

1 Press CH+/- buttons or the NUMBER 0-9 button to

choose desired searching frequency.

(regard channel 18 as example).

MUTE

SCAN

STILL

DISPLAY

SLEEP

PIP

ABC@

DEF

GHI$

JKL%

MNO

2 After calling up the

TUNING menu, press

POR&

STUV

*#()

WXYZ

PICTURE

CH+/- button

TV/AV

SWAP

Tuning Program

AUDIO

Country

England

to select "Tuning

Program" item.

ADJUST

TUNING

FUNCTION

TIMER

Auto Search

Program Table

PIP Source

PIP Position

P.STD

S.STD

HDMI/DVI

Center

CH+

CH-

VOL-

VOL+

3 Press CH+/- toselect

Manual Search item,

Press VOL+ buttonto

enter the desired

frequency and press

the digital button to

adjust.

H.LOCK

EXIT

PICTURE

AUDIO

Tuning Program

C 28

Program Number

CH.LIST

TIMER ZOOM

ADJUST

TUNING

FUNCTION

TIMER

Edit Name

AUTO

D/K

Color System

Sound System

Manual Search

Fine Tuning

Skip

62.25MHz

Off

4 press MENU button to return to previous or

press EXIT button to return to TV viewing.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuning menu

Fine Tuning

If the picture and/or sound are poor, try using the FINE

TUNING feature. Do not use this feature unless reception

is poor.

1 Press CH+/- button or

NUMBER 0-9 button to

c 28

AUTO

MUTE

SCAN

STILL

DISPLAY

SLEEP

PIP

choose desired channels

ABC@

DEF

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

2 Press MENU button

and CH+/- button, till the

TUNING menu shown on

TV/AV

SWAP

P.STD

S.STD

CH+

CH-

the right display on the

PICTURE

screen.

Tuning Program

AUDIO

VOL-

VOL+

Country

England

ADJUST

TUNING

FUNCTION

TIMER

Auto Search

Program Table

PIP Source

PIP Position

HDMI/DVI

Center

3 ^{Press VOL+ button}

to enter submenu, and

press CH+/-button

to select Tuning Program

item, and then press

VOL+ to next submenu,

and press CH+/-button

again to make the

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

PICTURE

AUDIO

Tuning Program

C 28

Program Number

ADJUST

TUNING

FUNCTION

TIMER

Edit Name

Color System

Sound System

icon to Fine Tuning.

AUTO

D/K

62.25MHz

Manual Search

Fine Tuning

Skip

Off

4 Press VOL-/+ button

all through to carry out fine

tune, till the best picture and sound are obtained, then

loosen the button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuning menu

You can watch TV program in a presetting channel.

How to select the desired program

1 Using "Program number" buttons

Press digit button to select the program.

If 2-digit or 3-digit programs are selected , press

digit buttons you needed continuously within 3

seconds.

MUTE

SCAN

STILL

If selected channel program is set at Lock on mode

and no password has been entered after initiation of

the television, the screen will indicate require password

entry. If wrong password is entered, channel selection

will fail and previous program will still stay on the screen.

The program locking password can be modified in the

preset menu and previous password will be required.

DISPLAY

SLEEP

PIP

ABC@

DEF

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

TV/AV

SWAP

P.STD

S.STD

CH+

CH-

VOL-

VOL+

2 Using the CH+/- button.

Press the CH+button to selecta channel numberin

number increasing direction.

Press the CH-button to selecta channel numberin

number decreasing direction.

H.LOCK

EXIT

(Note: If Skip is ON on one channel, press CH+/- button,

the channel will not appear.)

CH.LIST

TIMER ZOOM

How to select the desired sound

Press the VOL-/+ button on the remote controller or

the front of the TV set to adjust the volume level.

The range is0~100. When thevolume buttons are

pressed the volume level is displayed automatically

on the TV screen.

Volume

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuning menu

If the colour of some channel is abnormal

Usually this shouldbe set inthe auto position.However

if the colourdisplayed on thescreen are incorrect,you can

manually select thecorrect colour system.

MUTE

SCAN

STILL

Press the MENU CH+/-and

VOL+/- button, till the Tuning

DISPLAY

SLEEP

PIP

Program menu shown on the

right will display on the screen.

PICTURE

ABC@

DEF

Tuning Program

AUDIO

C 28

Program Number

ADJUST

TUNING

FUNCTION

TIMER

Edit Name

GHI$

JKL%

MNO

AUTO

D/K

Color System

Sound System

Manual Search

POR&

STUV

*#()

WXYZ

Fine Tuning

Skip

Off

TV/AV

SWAP

P.STD

S.STD

If picture color is abnormal

CH+

CH-

Press the CH+/- button to select"Color System", then press

the VOL-/+ button to select the correct color system. In

general, you can set it as"AUTO".

Press VOL+/- button to select AUTO, NTSC, PAL, SECAM,

PAL60 and NTSC4.43 in turn.

VOL-

VOL+

If sound is abnormal

H.LOCK

EXIT

Press the CH+/-button to select "Sound System", thenpress

the VOL-/+ buttonto select thecorrect sound system.

Press VOL+/- buttonto select D/K, I, B/G, M in turn.

CH.LIST

TIMER ZOOM

Edit Name

If current program is to be named, press VOL-/+ button to

select position you want to change and press digits to change,

press MENU button to ensure it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuning menu

Skip

After the programs are presetting, you can skip some

programs so that to select your favorite channels only.

1. Press CH+/- button or

Direct-digit Choosing

button to selecta

MUTE

SCAN

STILL

DISPLAY

SLEEP

PIP

channel directly (take

PICTURE

channel 18 forexample).

Tuning Program

ABC@

DEF

AUDIO

Program Number

C 28

ADJUST

TUNING

FUNCTION

TIMER

Edit Name

Color System

Sound System

GHI$

JKL%

MNO

AUTO

D/K

2.Press MENU CH+/-

and VOL+/- button,

till the Tuning Program

menu shown on the

right will display on the

screen.

Manual Search

Fine Tuning

Skip

POR&

STUV

*#()

WXYZ

Off

TV/AV

SWAP

P.STD

S.STD

CH+

CH-

VOL-

VOL+

3. press VOL-/+ button to set Skip On.

And press menu exit.

If you want to recover the skipped channel

H.LOCK

EXIT

1. Use Direct-digit Choosing button to select the number

of the channel to be recovered.

2. Do the above steps again.

CH.LIST

TIMER ZOOM

3. Press VOL+/- button to set Skip Off.

Program swap

Swap function enables quick swap to the last watched program.

Suppose the channel number you

used just now is 8 and the channel

number you areusing is 18(as shown in

the figure).

If you want to return to the last

watched program channel 8, you can

simply press the swap button.

If you want to return to channel 18,

press the button again. Through this

function, you can easily change

between the channelyou are usingand

the channel youused last time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture menu

How to select picture modes

You can quickly select the desired picture mode from

three preset modes and one customized mode.

Press the P.STD button to call up

MUTE

SCAN

STILL

Video Mode

Video mode menu, and press

Bright

CH+/-button to select the

DISPLAY

SLEEP

PIP

ABC@

DEF

Normal

desired picture quality. Four kinds

GHI$

JKL%

MNO

of picture modes(i.e., "Normal",

"Soft","Personal" ,"Bright", ) can

be selected in turn.

Soft

POR&

STUV

*#()

WXYZ

Personal

TV/AV

SWAP

P.STD

S.STD

A sparesetting that canbe adjusted topersonal status

Personal

Normal

Soft

CH+

CH-

Designed for roomsthat have goodall round lighting

Designed for nighttime low lightviewing

VOL-

VOL+

Bright

Designed for roomswith high ambientlighting such

as daytime sport;

How to customize your own picture status

Press MEUN button and

H.LOCK

EXIT

then CH+/- button , till the

PICTURE menu shown on

the right display on the

screen. Press VOL+/- to

enter.

CH.LIST

TIMER ZOOM

PICTURE

Video Mode

Contrast

Personal

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

Brightness

Saturation

Hue

Sharpness

Noise Reduction

Auto

Press the CH+/- button

to select the item to

adjusted, then press the

VOL-/+ buttons to obtain

the desired effect.

Note: 1. thehue item isavailable only in

NTSC system.

2.the video mode, the saturation,

the hue and the sharpness items are no

available in VGAand DVI mode.

Press VOL-

Press VOL+

Bright

Brightness

Dark

Contrast

Weak

Strong

Sharpness

Soft

Sharp

Shallow color

More purple

Saturation

Deep color

More green

Hue(only in NTSCmode)

NOTE these items areadjustable only whenthe "video mode" is

set as "personal".

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture menu

Noise Reduction

Automatically filters out and reduces the image noise

and improves picture quality when receiving weak

video signals.

MUTE

SCAN

STILL

1 After calling up the

Picture menu, press

CH+/- button to select

DISPLAY

SLEEP

PIP

ABC@

DEF

GHI$

JKL%

MNO

"Noise Reduction" item.

POR&

STUV

*#()

WXYZ

PICTURE

Video Mode

Contrast

Personal

AUDIO

TV/AV

SWAP

2 ^{Press VOL+ to enter}

the list. Select Off, Auto

Weak, Medium or

ADJUST

TUNING

FUNCTION

TIMER

Brightness

Saturation

Hue

P.STD

S.STD

Sharpness

Noise Reduction

CH+

CH-

Auto

Strong according

VOL-

VOL+

to the image noise.

3 Press MENU return

to the picture menu.

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound menu

To choose sound modes

You can quickly select the desired sound mode from

three preset modes and one customized mode.

Press the S.STD button to call up

Audio mode menu, and press

CH+/- button to select the

Audio Mode

Music

MUTE

SCAN

STILL

DISPLAY

SLEEP

PIP

Standard

Hall

desired sound quality. Four kinds

ABC@

DEF

of sound models (i.e., Music

Personal Standard and

Hall ) can be selected in turn.

GHI$

JKL%

MNO

Personal

POR&

STUV

*#()

WXYZ

TV/AV

SWAP

P.STD

S.STD

Sound quality

Sound mode

Personal

A sparesetting that canbe adjusted topersonal tastes

CH+

CH-

Normal sound withmoderate bass andtreble setting

Standard

Hall

VOL-

VOL+

Designed to reducethe bass andtreble which

enhances the voicefor news programs

Enables extra bassand treble toenhance the movie

experience

Music

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

Balance

To balance right and left sound of the television.

The intermediate value is 0. When indication value of Balance

increases toward+50, sound of the right and left speaker

becomes stronger and weaker, respectively. When indication

value of Balance decreases toward -50, sound of the right and

left speaker becomes weaker and stronger.

Press MENU button and

then CH+/- button to select

AUDIO menu.

Press VOL+ to enter the

PICTURE

Volume

AUDIO

submenu. Press CH+/- button

to select Balance item. Press

VOL+/- to adjust the desired

level.

Balance

ADJUST

TUNING

FUNCTION

TIMER

Audio Mode

Five Equalizer

Surround

Auto Volume

Woofer

Music

Off

3 Press MENU return

to the picture menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound menu

Setting Five Equalizer sound

The sound settings can be adjusted to suit your

personal preferences.

1 Press MENU button and

then CH+/- button to select

AUDIO menu.

MUTE

SCAN

STILL

DISPLAY

SLEEP

PIP

ABC@

DEF

PICTURE

2 Press CH+/- button to

select "Five Equalizer", then

press VOL+ buttons to enter

the submenu.

Volume

AUDIO

Balance

GHI$

JKL%

MNO

ADJUST

TUNING

FUNCTION

TIMER

Audio Mode

Five Equalizer

Surround

Auto Volume

Woofer

Music

POR&

STUV

*#()

WXYZ

Off

TV/AV

SWAP

P.STD

S.STD

3 Press CH+/- button to

select frequency to adjust,

then press VOL+/- buttons to

adjust the value data.

CH+

CH-

VOL-

VOL+

PICTURE

AUDIO

Five Equalizer

4 When you are satisfied with

the setting, press MENU button

to return to the previous menu.

120Hz

ADJUST

TUNING

FUNCTION

TIMER

500Hz

1500Hz

5000Hz

10000Hz

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

Setting the surround sound

The surround soundfeature expands theaudio listening

field wider anddeeper to createexceptional sound

quality from theTV`s speakers.

Select Surround from -50 to+50 . Whenintermediate value

toward +50, theeffect will be distinctness.

Repeated step 1-2, and press CH+/-to select surround, and

then press VOL+/- toset the desiredvalue.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound menu

Setting the Auto Volume

Each broadcasting stationhas its ownsignal conditions,

and so itis not easyfor you toadjust the volumeevery time

the channel ischanged. This featurelets you automatically

adjust the volumeof the desiredchannel and reducesthe

volume differences betweenchannels and programs,

providing a moreconstant overall level. This will alsoreduce

the dynamics ofsound.

MUTE

SCAN

STILL

DISPLAY

SLEEP

PIP

Repeated step 1-2, and press CH+/-to select Auto Volume,

and then press VOL+/- toset as Off or On.

ABC@

DEF

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

Setting the woofer sound

TV/AV

SWAP

Woofer is aspeaker that complements frontspeaker`s

reproduction capability of low-pitchedsound.

Select Woofer toset the valueof woofer from0 to 100.

P.STD

S.STD

CH+

CH-

Repeated step 1-2, and press CH+/-to select Woofer,

and then press VOL+/- toadjust the desiredlevel.

VOL-

VOL+

How to eliminate sound

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

When you need to pay attention to surrounded sounds, or

there is a telephone calling you or there are some guests

visiting you, the sound elimination (mute) function is very

convenient.

Press the MUTEbutton on

the remote controland "Mute"

type face willdisplay on the

lower part ofthe screen. At this

time, the soundof the TV set

is turned off.

Mute

If you wantto recover the

sound, press theMUTE

button again ordirectly press

the VOL-/+ buttons.

Download from Www.Somanuals.com. All Manuals Search And Download.

Timer menu

Timer setting

The clock will only work if the TV set is turned

on or in standby. When the set is disconnect

from the power supply or is turned off by the

main power on the rear panel, the clock loses

power and will need to be reset when the power

MUTE

SCAN

STILL

DISPLAY

SLEEP

PIP

1 Press the MENU button and CH+/- button, till the TIMER

menu display on the screen.

ABC@

DEF

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

TV/AV

SWAP

P.STD

S.STD

PICTURE

CH+

CH-

Timer

AUDIO

Time Off

ADJUST

TUNING

FUNCTION

TIMER

VOL-

VOL+

Time On

TimerOn Prog

Timer Prog

Prog Num

H.LOCK

EXIT

2 Press CH+/- button select "Timer", press VOL -/+

buttons to select hour or minute position; then press

digits buttonsto setthe valueof houror minute;

CH.LIST

TIMER ZOOM

3Press MENU button toreturn theprevious menu.

NOTE:

Indication will appear on the screen 1 minute prior to

expiry of set time.

Suppose Time Off is set, and indication is as follows:

1.If Timeroption is setting,

the time you set for Time

Off/Time Onwill be a point of

time. Otherwise, if Timer is

not set, the time you set for

Time Off/Time On will be a

period of time.

Time Off

2.Sleep Off/ Time Offcan

not be set at simultaneously.

If both of the two are set, the

later setup will be operation.

Download from Www.Somanuals.com. All Manuals Search And Download.

Timer menu

You can set the On/Off timers so that the set will :

Switch on automaticallyand tune tothe channel ofyour choice atthe time

you select.

Switch off automatically at thetime you select.

On/off timer \Timer on Prog\ Timer Prog

1 Press MENU andVOL+/- button tocall up theTIMER menu

on the screen.

MUTE

SCAN

STILL

DISPLAY

SLEEP

PIP

PICTURE

ABC@

DEF

Timer

AUDIO

Time Off

GHI$

JKL%

MNO

ADJUST

TUNING

FUNCTION

TIMER

Time On

TimerOn Prog

Timer Prog

Prog Num

POR&

STUV

*#()

WXYZ

TV/AV

SWAP

P.STD

S.STD

CH+

CH-

Press CH+/- buttonto select "Time On", press VOL-/+

buttons to selecthour or minuteposition; then pressdigits

buttons to setthe value ofhours or minutes.

(take 19:00 asan example)

VOL-

VOL+

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

PICTURE

Timer

AUDIO

Time Off

ADJUST

TUNING

FUNCTION

TIMER

Time On

TimerOn Prog

Timer Prog

Prog Num

3 Press CH+/- buttonto select "Timer On Prog", then

press VOL-/+ andprogram direct numberbuttons to select

your desired channel(take 8 asan example).

4press CH+/- buttonto select "Timer Prog", press VOL-/+

buttons to selecthour or minuteposition; then pressdigits

buttons to setthe value ofhours or minutes.

Repeat step 1-2to set Time Off .(Take22:30 as an

example)

Download from Www.Somanuals.com. All Manuals Search And Download.

Function menu

It is possible to select language, OSD transparent, position and screen display

of the menuas follows:

Function setup

1. Press MENU buttononce, and theCH+/- button untilthe

following menu appearson the screen:

MUTE

SCAN

STILL

DISPLAY

SLEEP

PIP

PICTURE

English

Language

AUDIO

Menu Timeout

Menu Backgroud

BlueScreen

15 seconds

Transparent

Off

ABC@

DEF

ADJUST

TUNING

FUNCTION

TIMER

Calendar

GHI$

JKL%

MNO

West Europe

TeleText Language

Restore Default Value

POR&

STUV

*#()

WXYZ

TV/AV

SWAP

P.STD

S.STD

2. Press VOL+ buttonon the remotecontroller to callup the

FUNCTION menu.

CH+

CH-

3. Press CH+/- toselect desired itemon the menu.

4.Press VOL+/- to adjust the itemyou have selected.

VOL-

VOL+

OSD language option

Repeat step 3and 4 toselect the languageyou wanted from

the 13 kindsof languages.

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

Menu Timeout

Repeat step 3and 4 toselect the timeof the OSDdisplay in

sequence as follows:5 seconds,15 seconds, 10seconds,

20seconds, 25seconds, 30seconds and 40seconds.

Menu Background

Repeat step 3and 4 toselect Transparent/ Opaque

background of OSD.

Blue Screen

Repeat step 3 and 4 to select Blue Screen On/Off.If you

select ON, when no signal, the background is blue; if you

select OFF, when no signal, the background is dark.

Download from Www.Somanuals.com. All Manuals Search And Download.

Function menu

Function setup (continue)

Calendar display and check

Repeat step 3 and 4 to enter Calendar menu as follows:

2005-01-01

MUTE

SCAN

STILL

Sun. Mon. Tue. Wed. Thu. Fri.

Sat.

DISPLAY

SLEEP

PIP

11 12

18 19

25 26

14 15

21 22

28 29

ABC@

DEF

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

Press VOL+/- toselect among year, month and day,

and then CH+/- to adjust them.

TV/AV

SWAP

P.STD

S.STD

Teletext Language

Repeat step 3 and 4 to select from 6 kinds of languages.

(West Europe/East Europe/Cyrillic/Greek/Arabic/Persian.)

CH+

CH-

VOL-

VOL+

Restore Default Value

Repeat step 3and 4 toreturn the factorymode.

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjust menu

To choose picture aspect ratio

1 Using ZOOM button.

Press ZOOM button to select the

Normal

desired picture ratio. Three kinds

MUTE

SCAN

STILL

of aspect ratio models (i.e.,

Wide screen

4:3 mode

DISPLAY

SLEEP

PIP

"Normal", "Wide screen" and "4:3

mode") can be selected in turn.

ABC@

DEF

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

Aspect ratio

Normal

Picture effect

TV/AV

SWAP

no cut outon input signal picture with un-changed

scale displayed onthe screen(to keepthe scale,

maybe only thecenter area ofthe screen isactive)

P.STD

S.STD

CH+

CH-

input signal isvertically cut outby 10% andpicture's

center area isnon-linear zoomed tofill the whole

screen

Widescreen

4:3 mode

VOL-

VOL+

Choose 4:3 when you wantto view apicture with an

original 4:3 aspectratio, with blackbars appearing at

both the leftand right sides.

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

2 Using the MENU button.

1 Press MENU buttonand then CH+/-button , tillthe ADJUST

menu shown onthe right displayon the screen.

PICTURE

Display Mode

Adjust

Normal

AUDIO

It does not

work on

the TV

ADJUST

TUNING

FUNCTION

TIMER

RGB

Note: Under the HDTV

VGA and DVI signal,

there are only Normal

and 4:3 mode to adjust.

Default

Auto Sync

Color Temperature

Black Stretch

Normal

Off

mode.

2 Press CH+/- buttonto select Display Mode option,

then press VOL+button to selectthe desired option.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjust menu

In PC and HDMI/DVI input mode, H-Position and V-Position can be adjusted to eliminate

transverse line interference and decentered picture as follows:

H-Position and V-Position adjust

Adjust is opted for adjusting H-Position and V-Position

as well asrelative parameters inVGA andDVI modes.

1. Press MENU button and CH+/- to call up the ADJUST

menu. as follows:

MUTE

SCAN

STILL

DISPLAY

SLEEP

PIP

PC, HDMI/DVI:

ABC@

DEF

GHI$

JKL%

MNO

PICTURE

Display Mode

Adjust

Normal

POR&

STUV

*#()

WXYZ

AUDIO

Only be adjustable

in the PC,HDMI/DVI

mode.

ADJUST

TUNING

FUNCTION

TIMER

RGB

TV/AV

SWAP

Default

Auto Sync

Color Temperature

Black Stretch

P.STD

S.STD

Normal

Off

CH+

CH-

VOL-

VOL+

2. Press VOL+ button on television or remote controller

to enter theadjust menu ofpicture position setup.

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

PICTURE

Adjust

AUDIO

H Size

ADJUST

H Position

TUNING

V Size

V Position

FUNCTION

Fine Tune

TIMER

Smoothing

3. Press CH+/- buttonfor desired adjustparameter option.

4. Press VOL+/- fordesired adjust parameteroption until

satisfactory value isachieved. When VGAsignals are received,

the automatic modeis used forparameter adjustment.

H Size Horizontal size of picture can be adjusted in this item.

H Position: Horizontal position of picture can be adjusted in this item.

V Size: Vertical size of picture can be adjusted in this item.

V Position: Vertical position of picture can be adjusted in this item.

Fine Tune: Adjust phase to the best effect suiting for VGA signal.

Smoothing: make the line of the picture smooth.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjust menu

RGB/Default/Auto Sync

1) RGB is opted for adjustment of the numerical value of red,

green and bluein PC,HDMI/DVI mode.

2) Default is opted for adjustment of parameters to delivery

setup in PC mode.(After the operation, complete will be on the

right of theoperation)

MUTE

SCAN

STILL

3) Auto Sync is opted for adjustment of picture location

frequency and phase parameters in PC mode.(After the

operation, complete willbe on theright of theoperation)

DISPLAY

SLEEP

PIP

ABC@

DEF

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

Color Temperature

TV/AV

SWAP

Press CH+/- to make the icon to Color Temperature,

and press VOL+/- button to select.

P.STD

S.STD

CH+

CH-

There are four kinds of

modes (i.e., "Normal",

"Cold" ,"Green","Warm" )

can be selected in turn.

VOL-

VOL+

PICTURE

Display Mode

Adjust

Normal

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

RGB

Default

H.LOCK

EXIT

Auto Sync

Color Temperature

Black Stretch

Normal

Off

CH.LIST

TIMER ZOOM

This will increaseor decrease Warm (red) and Cold

(blue) colors to suit personal preferences. Select Cold

to give the white colors a blue tint, Normal to give the

white colors a neutral tint, Warm to give the white colors

a red tint. Green to give the white colors a green tint.

Black Stretch

Black Stretch-(Automatically Increases the Contrast

Rage)

Download from Www.Somanuals.com. All Manuals Search And Download.

Lock setup

How to use the password function

Press H.LOCK button, Password will appearon the screen.

The television has the

function of security

default lock. Password

needs to be entered

when the program

lock mode is to be

set.

The initial password of thetelevision is 0000and security

default password is9443. then enterLock Set menu.(as

follow)

LOCK SET

Password

Off

Tuner Lock

Prog Set

MUTE

SCAN

STILL

Prog Num

Source Lock

Child Lock

Max Volume

Clear Lock

DISPLAY

SLEEP

PIP

Off

100

ABC@

DEF

GHI$

JKL%

MNO

The television hasthe function ofsecurity default lock.

Password needs tobe entered whenthe program lockmode

is to beset.

POR&

STUV

*#()

WXYZ

TV/AV

SWAP

P.STD

S.STD

Note: If thepassword is notcorrectly entered, youwill be

required to reenterthe password andthe cursor willstay at

the first place.

The security default password is9443.

Press EXIT to cancel thewindow.

CH+

CH-

VOL-

VOL+

To set new Password

H.LOCK

EXIT

The password canbe changed.

After entering the Lock set menu, Press CH+/- to select

password, Press vol+/-, the screen willdisplay the follow.

CH.LIST

TIMER ZOOM

Old ----

If correct password is entered, the screen will display the

follow.

New ----

Press digital button to set the new desired password, and

the screen willdisplay the follow.

Note:

If Clear Lockis activated,

the password setup

cannot be changed.

Repeat ----

If the desired password is entered correctly twice, the old

password will be changed. If the desired password is not

correctly entered twice, the screen will display New ----, then

you have toreenter the password.

Download from Www.Somanuals.com. All Manuals Search And Download.

Lock setup

Tuner Lock

Press CH+/- to select Tuner Lock and VOL+/- to set On/

Off. (To set On, some operation such as search will be

not available. Whenenter theTUNING menu,Tuner Lockwill be

on the screen,and the timewill be thesame with themain menu if

no operation. Ifyou want tooperate TUNINGmenu, you needto

enter the Lockmenu to setTuner LockOff oroperate Clear Lock.

MUTE

SCAN

STILL

DISPLAY

SLEEP

PIP

Prog Set

ABC@

DEF

Prog Set is opted for setting up start channel. Press CH+/- button

to select Prog Set. Press VOL+/- button, sources can be

swapped in TV/SCART1/SCART2/AV/HDTV/VGA/HDMI mode.

After setup, the set mode will be entered if the television is

switched off and on again. To set Off, the television will memory

the off-channel.

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

TV/AV

SWAP

P.STD

S.STD

CH+

CH-

Prog Num

VOL-

VOL+

Prog Num is opted for setting up preset channel. Press CH+/-

button to select Prog Num. Press VOL /- button, to select

channel number.(The item is not available except TV signal.)

Source Lock

H.LOCK

EXIT

Source Lock isopted to hinderexternal input modes, such as

AV, Scart andVGA. Press CH+/- button to selectthe option,

and press VOL+/- button to displaySource Lock menuas

follows:

CH.LIST

TIMER ZOOM

Source Lock

Off

SCART1

SCART2

Off

HDTV

VGA

Off

HDMI

Press CH+/- button to select desired option. Press VOL+/-

button to set up the mode of Source Lock. If some Source Lock

is set ON, the mode will be entered and the screen will display

blue background with the mute mode activated and Lock. In

lock on mode, when screen is blank, icon Lock will be always

displayed on the screen. If lock mode is to be verified, enter

Source Lock submenu and set relative mode off, or select Clear

Lock in the Lock Set Menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Lock setup

Child Lock

Press CH+/- button to select Child Lock.

Press VOL+/- button to set On or Off mode. If lock on

mode is set, Child Lock is in activated automatically.

In such case, if Child Lock button (button on the

television) is pressed, the screen will display Child

Lock, which can be erased by press of EXIT button. 5

seconds later after the latest press, the screen

display will disappear automatically. The Child Lock

mode can be resumed by entering Lock Set menu, set

Child Lock On or Off.

MUTE

SCAN

STILL

DISPLAY

SLEEP

PIP

ABC@

DEF

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

TV/AV

SWAP

Max Volume

P.STD

S.STD

Press CH+/- button to select Max Volume. Press

VOL+/- button for adjustment between 0 100. If a

certain value is set, when volume is being adjusted,

the sound value can not exceed maximum volume

value. If current volume is over Max Volume, when

Lock Set menu is set, current volume will become set

maximum volume. If current volume is below

maximum volume, customer set volume will stay

unchanged.

CH+

CH-

VOL-

VOL+

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

Clear Lock

Press CH+/- button to select Unlock mode. Press

VOL+/- button to unlock all set modes, setting all lock

options to off, and the maximum volume returns to 100.

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture in Picture

Preparation

Press the PIPbutton on the remote control to swicth to PIP

function.

PIP position

1 Press MENU button and then

press CH+/- button, till the

TUNING menu shown on the

MUTE

SCAN

STILL

DISPLAY

SLEEP

PIP

ABC@

right display on the screen.

DEF

PICTURE

GHI$

JKL%

MNO

Tuning Program

AUDIO

Country

England

2 Press the CH+/- button to select

PIP Position item.

ADJUST

TUNING

FUNCTION

TIMER

Auto Search

Program Table

PIP Source

PIP Position

POR&

STUV

*#()

WXYZ

HDMI/DVI

Center

TV/AV

SWAP

3 Press the VOL+ button repeatedly

until desired position is achieved.

The sub picture moves

P.STD

S.STD

CH+

CH-

Left Top/Right Top / Right Bottom/

Left Bottom /Center.

VOL-

VOL+

Selecting an Input Signal Source for PIP

H.LOCK

EXIT

1 Press MENU button and then

press CH+/- button, till the

CH.LIST

TIMER ZOOM

TUNING menu shown on the

PICTURE

right display on the screen.

Tuning Program

AUDIO

Country

England

ADJUST

Auto Search

TUNING

FUNCTION

TIMER

Program Table

PIP Source

2 Press the CH+/- button to select

PIP Source item.

HDMI/DVI

Center

PIP Position

3 Press the VOL+ button repeatedly

until desired source is achieved.

NOTE:

If to use PIP function, you

need to select one of two in

main picture source and

available sub picture source;

When the VGA is be sub picture,

the resolution must be more

800x600 dot;

Each press ofVOL+/- button changes themain source.

Main Picture Sources

Available SubPicture Sources

When the HDMI/DVI is be sub

picture, the DVI to HDMI is

no useful.

TV, SCART1, SCART2,

HDTV,PC

HDMI/DVI

HDMI/DVI/SCART(RGB)

TV,HDTV,PC

SCART(RGB)

HDMI/DVI

TV,HDTV,PC

TV, SCART1, SCART2, HDTV,PC

Download from Www.Somanuals.com. All Manuals Search And Download.

Others functions

NICAM

If the broadcasteris transmitting

Bilingual sound service. The

button on theremote controller will

allow up to2 separate languages

to be selected.

You can press the

MUTE

SCAN

STILL

button to makea choice.

DISPLAY

SLEEP

PIP

ABC@

DEF

Display function

GHI$

JKL%

MNO

If current programnumber, color

system and soundsystem are tobe

displayed on thescreen, press

POR&

STUV

*#()

WXYZ

AUTO

TV/AV

SWAP

DISPLAY button, and allthe related

information will appearat right up

corner of thescreen.

P.STD

S.STD

CH+

CH-

If the DISPLAY button is pressed

again, the displayedinformation will disappear.

(If the programis named, itsname will alsoappear ).

VOL-

VOL+

Auto program scan

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

1 If you want to select a

desirable program, you may

scan all the TV programs in

memory. You can simply press

SCAN button to do this.

Press scan button once, there

are nicepictures onthe screen.

Press scan button again, there

are sixteen pictures on the

screen.

2 If you want to stop the

function during auto tunning,

simply press SCAN button

again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Others functions

Sleep

Note:

The TV set will switch automatically to standby at the

preset time with the SLEEP time on. You may set the

sleep time, Operateas follows:

The ON TIME setup and

the SLEEP setup is

absolute one another.

1. Press SLEEP button repeatedly to select the number

of preset minutes, the timer will be set in sequence:

0Min 15Min 30Min 60Min 120Min

240Min 0Min

MUTE

SCAN

STILL

2. After the sleep time is set, the Indication will appear

on the screen 1minute prior to expiry of set time.

DISPLAY

SLEEP

PIP

ABC@

DEF

Time off

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

TV/AV

SWAP

3 If remaining timeof set timer is tobe displayed, press

SLEEP button again.

P.STD

S.STD

The TV set will switch off automatically at the preset time,

press CH+/- button to turn on again.

CH+

CH-

VOL-

VOL+

4 If to cancelsleep time, pressSLEEP button repeatedly to

set as 0.

H.LOCK

EXIT

Picture Still

CH.LIST

TIMER ZOOM

Press Still button, the picturewill be still;if to cancel, press Still

button again, thepicture will resume.

Auto switch-off function

If an empty channel isselected or the TVprograms are

ended forthe day, thepower willbe switchedoff 5minutes

later automatically. If the "OFF TIME" is setting, it will be

switched off according to the presetting time. The auto

power offfunction does notwork undervideo input.

Under PC state, if no signals input, the television will

enter standbystatus 1minuteslater automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

Teletext functions

Teletext is an information system, broadcast by certain channels,

which can be read like a newspaper . It also provides subtitles for

people with hearing difficulties or those who are unfamiliar with the

language in which a particular programme is being broadcast (cable

networks, satellite channels, etc.).

Teletext function operation

You can press

button into TEXT mode,

press again to leave TEXT mode. All menu

related functions are not available in TEXT

mode. Only a few direct button control

functions are available in TEXT mode, they

MUTE

SCAN

STILL

DISPLAY

SLEEP

PIP

ABC@

DEF

GHI$

JKL%

MNO

1 Page up/down

POR&

STUV

*#()

WXYZ

Result: Use the CH+/- buttons to browse next

or previous page.

TV/AV

SWAP

P.STD

S.STD

CH+

CH-

VOL-

VOL+

2 Page number entering

Result: To select a teletext page either directly

enter the page number using the

numeric button pad on the remote

control or use CH+/- buttons, or the

colored Fast Text buttons.

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

Download from Www.Somanuals.com. All Manuals Search And Download.

Teletext functions

(MIX)

While in Teletext mode press the

button will show the teletext data

superimposed on top of the TV picture. Press the button again to revert

back to Full text.

(HOLD)

Pressing the

button will stop the teletext page automatically updating.

This feature is very useful where there are several teletext pages or

data on the same page number.

(SIZE)

Pressing the

button to change from different screen display size.

This feature is very useful as it magnifies the image making the characters

easier to read.

(REVEAL)

Pressing the

button will reveal hidden text. This feature is used to reveal

information such as answers to Teletext on-line interactive puzzles.

TIMER

While in normal TV mode only, pressing the button TIMER will display the

teletext time in the top right corner for a few seconds.

(TEXT)

Press the

button on the remote control to turn teletext On/Off.

button will get the teletext decoder to automatically

search for the subtitle page. In NZ the subtitle is usually page 801.

(SUBTITLE)

Pressing the

(INDEX)

Press the button to show the list of teletext contents

(Fast text colored buttons)

Fast text automatically displays the four most commonly used pages that

the broadcaster thinks that you may want to choose next. Press the same

coloured button on the remote control as the coloured link at the bottom

of the teletext page to go directly to that page.

Download from Www.Somanuals.com. All Manuals Search And Download.

Stream media broadcast system

Stream media play prepare

1. Supporting equipment

1.Equipment supporting Mass and

Storage agreements include USB,

mobile hard disk, card reader, some

MP3 anddigital camera.

2.Equipment supporting PTP

agreement includes some digital

camera.

4.Many movie files use suffix ofAVI and

MPG. However, many kinds of format

are used for internal files. This

television can only play some AVI and

MPG files ofthis format.Those files with

suffix ofdat are notmovie files, butdata

files used by computers, and cannot be

played for movies.

2.1Supportingmedia:

5.External card reader supports most

digital cards available in the market.

Readable digital cards are classified

according to the property of card

readers andcan beconnected tomobile

hard disks (working voltage 5.0V,

working current notover 500mA).

6. Some time the television operation

may be halted due to excessive rate of

information code errors. In such case,

restart the system. As there are many

nonstandard USB mobile devices in the

market. If this kind of USB mobile

devices are used in the stream media

p l a y s y s t e m , t h e p r o b l e m o f

identification failure might occur. The

same problem may also happen with

computers, not televisions.

picture, music, MPEG4, MPEG2

and MPEG1;

Supporting fileformat

*.Avi, *.DIVX, *.MPEG,*.DAT,

*.MP3, *.WHA, *.JPG and *.JPEG.

Due to particularity of file code and

file mode,It ispossible thatsome files

cannot beread.

2.2 If Pic& Musicmode isactivated,

relative mediafile formatwill include

JPEG and MP3 files. After Picture is

selected, MP3 files set for play will

open both music and picture files for

sync playperformance. As somefiles

must be read while music is being

played, the speed of picture

operation responsemight beaffected.

3.Before starting operation, verify

USB storage device is of FAT32 and

FAT file system format. At present,

this television doesnot support NTFS

and the filesystems of otherformat.

7.It is suggested that the external

devices with USB.0interface be usedto

improve velocity of information reading

and continuityof informationplay.

Download from Www.Somanuals.com. All Manuals Search And Download.

Stream media broadcast system

Stream media system setup

Note: Memory cards or USB devices are not

supplied with this TV.

AAA Multimedia Player

1 Insert USB in one of the card slots at the right

side or the back bottom of the TV.

2 Insert it to be clicked in.

When a memory card or a USB device is inserted,

the Stream media system menu is displayed

automatically, see further.

Card

USB

File copy

SETUP

Remove Card

Remove USB

Press ENTER button to play this devices

AAA Multimedia Player

Removing USB device

1 Press

USB, and pressENTER button toensure it.

2 press menu exit the menu.

3 Remove the memory card/USB device.

button to select Remove Cardor

Card

USB

File copy

SETUP

Remove Card

Remove USB

Press ENTER button to remove Card devices

Card data protection

- Do not remove the card/USB device when the content is being read or when

browsing. Such action may damage the memory card/USB device.

- Do not touch the terminals on the back of the card.

- Always insert a card in the correct direction. Failure to do so may result in

damage to thecard and theunit.

- Do notsubject the cardto excessive pressureor strong impacts.

- Malfunctions of the unit or card may result in data loss or damage to the card.

- Haier shall not accept any liability for damage or loss of stored data.

Warning:

Memory cards can be swallowed

by young children. Do not allow

children to handlememory cards.

Please remove thememory card

immediately after use.

Download from Www.Somanuals.com. All Manuals Search And Download.

Stream media broadcast system

To start the media play

1. Press TV/AV button, and then

to press CH+/- to select USB

AAA Multimedia Player

option, press CH+ button to

enter media play system.

(As follow)

Card

MUTE

SCAN

STILL

USB

File copy

DISPLAY

SLEEP

PIP

SETUP

2. Press / button to select

the desired option.

Remove Card

ABC@

DEF

Remove USB

Press ENTER key to play this devices

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

3. Press button to enter

desired option.

TV/AV

SWAP

P.STD

S.STD

4. Press EXIT to return.

CH+

CH-

VOL-

VOL+

5. If to exit USB system, you need to return to source

menu, and press digit 1button to watch TV.

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

To operate the menu

1. Press

2. Press

3. Press

button to select the item with up or down.

button to ensure the desired option.

button to operate play quickly or slowly.

Note:

4. Press

button to make the program stop.

If on operating, the

saver will appearson

the screen.

5. Press ZOOM button to make zoom, and press

or button to enjoy the detail.

6. Press EXIT button to stop the program play and

return to previousmenu, and presscontinuously it to

return to main menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Stream media broadcast system

To select stream media broadcast system

1.Press

button to

AAA Multimedia Player

select "Card"or "USB".

(The device be inserted

and identified).

Card

USB

File copy

2. Press button to

enter adjusted option.

SETUP

MUTE

SCAN

STILL

Remove Card

Remove USB

DISPLAY

SLEEP

PIP

Press ENTER button to play this devices

ABC@

DEF

To play picture

GHI$

JKL%

MNO

AAA Multimedia Player

POR&

STUV

*#()

WXYZ

3. Press

Picture item.

button to select

TV/AV

SWAP

Picture

4. Press

the menu of play.

button to enter

P.STD

S.STD

Movie

Music

CH+

CH-

Music and PIC

VOL-

VOL+

5. Press again

select desired enjoy picture,

and then press button

to enter the play menu.

button to

AAA Multimedia Player

6. On display, Press

select the speed of play.

(Normal, slow, fast).

H.LOCK

EXIT

F-007 .JPG

F-008 .JPG

F-009 .JPG

F-010 .JPG

F-011 .JPG

F-012 .JPG

CH.LIST

TIMER ZOOM

7. Press

button to swap

the picture of next and previous.

Press EXIT button to return.

Play

JPEG

0016.JPG

Slideshow speed standard

IMAGE

Note:

the play file menu are

different with your USB

devices.

To enjoy the picture detail

1. After selecting the picture to play, press ZOOM to

select desired zoom.

2. Press EXIT button to exit the display, and then

press

to move and enjoy the picture detail.

To make the picture overturn

Each press of NEXT button to make overturn 90 with right,

press button to resume the program.

Download from Www.Somanuals.com. All Manuals Search And Download.

Stream media broadcast system

To enjoy music

1. Press

button to select

"Music" option.

AAA Multimedia Player

2. Press

play menu.

button to enter

Picture

Movie

MUTE

SCAN

STILL

Music

DISPLAY

SLEEP

PIP

Music and PIC

3. Press

desired music, and then press

button to play music.

button to select

ABC@

DEF

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

Note: the play file menu are

different with your USB.

AAA Multimedia Player

TV/AV

SWAP

The day went away .MP3

P.STD

S.STD

4. When playing music,

CH+

CH-

press

play mode, (play mode:

button to select

VOL-

VOL+

standard, program, Random;

Repeat mode: Disc Repeat,

Folder Repeat, File Repeat)

and press button to

ensure the mode.

H.LOCK

EXIT

The day you wentaway.MP3

Play mode standard

CH.LIST

TIMER ZOOM

5. When playing music, press

button to set the speed

of play.(quick or slow)

6. Press button to swap

the next and previous music.

01 07 / 04 20

Note: 1. DISC Repeat mode: press

button,

the DISC Repeatwill appear onthe screen, andthen

press to ensureit.

2. Program mode:

press

button toselect the

music in leftlist, and press

button to programin turn,

and then theDISC Repeat will

appear on thescreen, and then

The day went .MP3

Soft .MP3

The day went .MP3

press button to select"Done",

and then press button to

ensure it.

Done

Download from Www.Somanuals.com. All Manuals Search And Download.

Stream media broadcast system

To play Movie

1. Press button to select

"Movie" option.

AAA Multimedia Player

2. Press

menu.

button to enter play

MUTE

SCAN

STILL

Picture

DISPLAY

SLEEP

PIP

Movie

Music

3. Press again button to

select desired music, and

ABC@

DEF

Music and PIC

GHI$

JKL%

MNO

press again

it.

button to play

POR&

STUV

*#()

WXYZ

TV/AV

SWAP

AAA Multimedia Player

4. On display, press

to select in turn:

File-Play Back Control-Auto

channel-Play Mode

button

P.STD

S.STD

CH+

CH-

E08-8SOBTILES-1

VOL-

VOL+

5. Press

speed, press

button to set

button to

resume to standard mode.

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

6. Press button to select

the next movie or previous.

7. Press EXIT button repeatedly

to return.

Download from Www.Somanuals.com. All Manuals Search And Download.

Stream media broadcast system

To select the Music and PIC item

1. Press button to select

"Music and PIC" option, and

AAA Multimedia Player

press

button to enter menu.

MUTE

SCAN

STILL

2. Press

to select

desired file, and press

button to ensure it.

Picture

DISPLAY

SLEEP

PIP

Movie

ABC@

DEF

Music

Music and PIC

(

to cancel). Repeat step

2 to select more file, and

press button to enter

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

TV/AV

SWAP

play menu.

P.STD

S.STD

AAA Multimedia Player

3. On display menu, press

button to select the

speed to play.( Normal,

slow, fast).

CH+

CH-

F-007 .JPG

F-008 .JPG

F-009 .JPG

F-010 .JPG

F-011 .JPG

F-012 .JPG

VOL-

VOL+

4. Press button to swap

the next and previous picture,

H.LOCK

EXIT

press

the music.

button to select

Play

CH.LIST

TIMER ZOOM

JPEG

0016.JPG

MP3

The day you went away .MP3

00 01:43

Play mode standard

IMAGE

Note: press buttonto

stop playing the picture.

5. Press repeatedly EXIT

button to return.

Download from Www.Somanuals.com. All Manuals Search And Download.

Stream media broadcast system

Copy file function

1. Press button to select

"File Copy" item.

AAA Multimedia Player

2. Press button to enter

the copy menu.

Card

MUTE

SCAN

STILL

USB

File copy

DISPLAY

SLEEP

PIP

SETUP

3. Press

button to enter

ABC@

DEF

the file menu, and press

button to select "Card" or

"USB"

Press ENTER key to enter COPY menu

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

Select source Port:

TV/AV

SWAP

Card

USB

P.STD

S.STD

4. Press

button to enter

CH+

CH-

Card or USB, and select the

files to copy, then press EXIT

button to call up COPY and

PASTE, and then press

Root

VOL-

VOL+

F-007 .JPG

F-008 .JPG

F-009 .JPG

F-010 .JPG

F-011 .JPG

F-012 .JPG

button to select COPY, and

press

press again

button to confirm,

button to

H.LOCK

EXIT

select PASTE, then press

button to paste, in this

CH.LIST

TIMER ZOOM

time, the "File already exits,

overwrite it "will appears

on the screen, and press

button to select YES/NO,

COPY

Root

PASTE

F-007 .JPG

F-008 .JPG

F-009 .JPG

F-010 .JPG

F-011 .JPG

F-012 .JPG

and then press

confirm.

button to

5. Press

button to cancel.

Note:

button to select

the all files;

button to cancel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Stream media broadcast system

To select language

1. Press button to select

"SETUP " item.

AAA Multimedia Player

Card

2. Press button to enter

the SETUP menu,

USB

MUTE

SCAN

STILL

File copy

SETUP

DISPLAY

SLEEP

PIP

3.and press again button

to enter language option.

ABC@

DEF

Press ENTER button to SETUP menu

GHI$

JKL%

MNO

POR&

STUV

*#()

WXYZ

4. Press

button to select

desired language, and press

to ensure it.

TV/AV

SWAP

AAA Multimedia Player

P.STD

S.STD

Language

Version

CH+

CH-

5. Press EXIT button to return.

VOL-

VOL+

H.LOCK

EXIT

CH.LIST

TIMER ZOOM

To display the version

1. Repeat steps 1-2, and

then press

select version.

buttonto

AAA Multimedia Player

2. Press button to display

the version number.

D0606050915M

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

- Early malfunctions can be prevented. Careful and regular cleaning can

extend the amount of time you will have your new TV. Be sure to turn the power

off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

1. Here`s agreat way tokeep the dustoff your screen for awhile. Wet a soft clothin a

mixture of lukewarmwater and alittle fabric softeneror dish washingdetergent. Wring

the cloth untilit`s almost dry, and thenuse it towipe the screen.

2. Make surethe excess wateris off the screen, andthen let itair-dry before youturn on

your TV.

Cleaning the Cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure

not to use a wet cloth.

Extended Absence

If you expectto leave yourTV dormant for a longtime (such asa vacation), it`sa good

idea to unplugthe power cordto protect againstpossible damage fromlightning or

power surges.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications and functions

P42A9-AK

Type

PLASMA DISPLAY PANEL

>170 (H)/170 (V)

Viewing angle

Diagonal

Screen

PAL, SECAM, NTSC-M

Color system

Sound system

Video input

D/K

B/G

TV/VIDEO

SCART (CVBS, Y/C, RGB), YCbCr

480i/p, 576i/p, 720p, 1080i

YPbPr

DTV YCbCr

Sound UPO

Power

2x7W

~ 150-240V 50/60Hz

Dimensions (WxHxD)mm

(With stand

1275mmX152mmX740mm Speaker included

Max.320W

Power consumption

Standby consumption

Working temperature: 5 ~35

Working humidity: 20%-80%

Store temperature: -15 ~45

Store humidity: 5%~90%

Condition

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

For the sake of time and cost, it is strongly recommended that you check out

the problem by yourself according to the instructions listed hereunder before

contacting the after-sales service for technical assistance.

Verify if the television is properly plugged.

Verify if the television is properly supplied power.

Verify if electricity is available.

No picture, no sound

Blank screen

Verify if correct signals are input.

Press TV/AV button to change signal input to TV input.

Restart the television of power supply is interrupted.

Press Mute button and verify if Mute mode is set.

Switch to other channel and verify if the same problem

happens.

No sound

Press VOL+ button to see if the problem can be solved.

Verify if sound system is correct. Refer to some chapter

for adjust.

Poor sound

Verify if correct channel is selected.

Adjust the antenna.

Make adjustments by Fine Tune and Manual Search.

No picture in some

channel

Verify if the same problem exists in other channels.

Check out of picture and sound systems.

Refer to relative instructions in the Manual for color

adjust.

No color for some

channel program

(black and white)

Verify if the antenna is correctly connected.

Verify if the antenna is in good condition.

Make fine adjustment of channel.

Spots with some or

all pictures

Check for local interference such as an electrical

appliance or power tool.

Horizontal/vertical bars

or picture shaking

Disconnect the television from power supply and, 10

seconds later, connect the television to the power supply.

If the problem still exists, contact authorized after-sales

service for technical assistance.

Television out of control

Note: Do not leave the television with static picture in an extended period as it may result in

residual image on your television screen.

Note: Production of the plasma screen requires high and precision technologies. However,

there might be some dark or bright (red, blue or green) spots, or some anomalistic stripes or

spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where the air

pressure is below 750hpa, the picture on the plasma screen may be affected and a muffled sound might

be produced. These phenomena might happen in the area 1,500 meters above the sea level. This is

resulted from difference between air pressures inside and outside the display. This is not a defect covered by

the limited warranty.

NOTE: Design and specifications are subject to change without notice.

The dimension in this manual is a approximation.

Download from Www.Somanuals.com. All Manuals Search And Download.

0090506976 03

Download from Www.Somanuals.com. All Manuals Search And Download.

Graco Heat Pump 312468E User Manual
Haier Air Conditioner AD842AHEAA User Manual
Haier Washer Dryer HWM70 0588 User Manual
Healthrider Home Gym HREL89070 User Manual
Heatiator Gas Heater CL36D User Manual
Honeywell Thermostat CT8602C User Manual
HP Hewlett Packard Scanner 7400c User Manual
Hypertec Carrying Case Z0102 User Manual
IBM Laptop THINKPAD 390 User Manual
iHome Clock Radio IP23 User Manual