HP Service Pack for ProLiant Quick Start
Guide
Abstract
This guide describes the Service Pack for ProLiant (SPP) and how to use it to update system software including firmware, drivers,
and utilities on ProLiant servers and Blade servers and enclosures. This guide is intended for individuals who are familiar with
configuring Microsoft Windows, Linux, and VMware, and updating, maintaining, and deploying firmware and software to
servers.
HP Part Number: 679796-006
Published: February 2014
Edition: 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Where can I find information on planning updates for data centers and corporate environments?.....18
Contents
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Introduction to SPP
SPP is a comprehensive systems software and firmware solution delivered as a single download.
This solution uses HP SUM as the deployment tool and is tested on all supported HP ProLiant servers
including HP ProLiant Gen8 servers.
HP SPP along with HP SUM provides breakthrough Smart Update system maintenance tools that
systematically update HP ProLiant servers and BladeSystem infrastructure with one-click simplicity
at the scale of your data center.
SPP release versions
HP releases a new SPP version with most major server releases. For the current and earlier SPP
For information about a specific SPP, SPP format or hot fix, see its release notes on the SPP
SPP Supplements
An SPP Supplement is a bundle containing software and/or firmware components with HP SUM
as the deployment tool. The bundle might include support for a new operating system update or
functionality that is not included in the SPP but works with the components in the SPP. The software
and firmware included in the Supplement provides support for functionality that is required outside
a normal SPP release cycle. Supplements allow HP to deliver support when it is needed so customers
do not have to wait for the next SPP. Support for SPP Supplements is included as part of the
associated SPP’s support period.
The version number for each SPP supplement matches the version of its corresponding SPP.
Supplement release notes include information on the components in the bundle. If the Supplement
includes Linux components, the components are also available on the SDR. Any operating system
support added in a Supplement is included in the next SPP.
Download SPP Supplements from the SPP Information section on the SPP Download or Release
Archive pages.
Deployment modes
For detailed information about deployment modes, see the HP Smart Update Manager User Guide
Operating system support
For system requirements, prerequisites, and supported operating systems, servers, and devices,
see the HP Service Pack for ProLiant Release Notes or the server support guide in the SPP Information
For more information on HP operating systems and virtualization software support for HP ProLiant
For information on using the SPP to update systems running Windows Server 2008, see
the Implementing Microsoft Windows Server 2012 in the SPP Information Library.
For information on using the SPP to update Linux systems, see the Linux best practices using HP
Service Pack for ProLiant (SPP) and the Software Delivery Repository (SDR) in the SPP Information
Library.
SPP release versions
5
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the SPP to update VMware systems, see the VMware: Best Practices for
maintaining HP firmware, driver and system software using the HP Service Pack for ProLiant (SPP)
and the Software Delivery Repository (SDR) in the SPP Information Library.
6
Introduction to SPP
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Downloading and installing an SPP
Before updating business-critical servers or those in a complex or distributed environment, develop
an update plan to minimize required downtime. For additional information, see the HP Smart
Update Best Practices Planning Guide.
IMPORTANT: If you have not updated your server in over a year, HP recommends you follow
the planning steps from the HP ProLiant and Integrity Firmware Management Best Practices Planning
Guide to develop an update plan that addresses all compatibility and dependency issues.
IMPORTANT: Before deploying any components to a system, be sure that a recent backup of the
system is available in the event the deployment procedure fails.
Using HP SUM to deploy an SPP
Determine whether you want to use online or offline mode to initiate deployment to your targets
using the SPP:
•
•
In online mode, HP SUM runs on a Windows or Linux hosted operating system.
In offline mode, the server boots to the SPP ISO (Bootable ISO only).
◦
In automatic mode, HP SUM updates firmware components for which updated versions
are available without interaction.
◦
In interactive mode, onscreen instructions guide you to update components.
Prerequisites for deploying SPP components on Windows
For detailed version information that addresses your environment see the HP Service Pack for
ProLiant Release Notes in the SPP Information Library.
When running HP SUM or deploying components to systems running a Microsoft Windows operating
system, the minimum requirements include:
•
•
•
•
•
•
A local administrative system with 1 GB of memory.
Sufficient hard-drive space of at least twice the file size of the components being deployed.
A system enabled for WMI.
Visibility to all remote targets by the administrative system running HP SUM.
An account with administrator privileges on each target server.
The beginning and ending IP addresses entered for the range of targets must both be on the
same subnet.
•
The network ports that HP SUM uses must be enabled. For more information on networking
ports used by HP SUM, see the HP Smart Update Manager User Guide.
You must have the user name and password available for each remote server. Alternatively, you
can use a domain account on the local administrative system that has administrator privileges on
the target servers.
NOTE: When attempting to use the remote deployment functionality of HP SUM on any edition
of Windows Server 2008 or Windows Vista, you must ensure that the File and Print Services feature
is enabled and the File and Print Services exception is enabled in the Windows firewall. Failure
to do so prevents HP SUM from deploying remote Windows targets.
Using HP SUM to deploy an SPP
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Disabling BitLocker to permit firmware updates (Windows only)
The TPM, when used with BitLocker, measures a system state. Upon detection of a changed ROM
image, it restricts access to the Windows file system if the user cannot provide the recovery key.
HP SUM detects if a TPM is enabled in your system. For some newer models of HP ProLiant servers,
if a TPM is detected in your system or with any remote server selected as a target, HP SUM utilities
for HP iLO, Smart Array, NIC, and BIOS warn users prior to a flash. If the user does not temporarily
disable BitLocker and does not cancel the flash, the BitLocker recovery key is needed to access the
user data upon reboot.
A recovery event is triggered in the following situations:
•
You do not temporarily disable BitLocker before flashing the system BIOS when using the
Microsoft BitLocker Drive Encryption.
•
You have optionally selected to measure HP iLO, Smart Array, and NIC firmware.
If HP SUM detects a TPM, a warning message appears:
CAUTION: A Trusted Platform Module (TPM) has been detected in this
system. Failure to perform proper OS encryption procedures will results
in loss of access to your data if recovery key is not available.
Recommended procedure for Microsoft Windows (R) BitLocker (TM) is to
\”suspend\” BitLocker prior to System ROM or Option ROM firmware flash.
If you do not have your recovery key or have not suspended BitLocker,
exit this flash. Failure to follow these instructions will results in
loss of access to your data.
To enable firmware updates without the need to type in the TPM password on each server, the
BitLocker Drive Encryption must be temporarily disabled. Disabling the BitLocker Drive Encryption
keeps the hard drive data encrypted. However, BitLocker uses a plain text decryption key that is
stored on the hard drive to read the information. After the firmware updates have been completed,
the BitLocker Drive Encryption can be re-enabled. Once the BitLocker Drive Encryption has been
re-enabled, the plain text key is removed and BitLocker secures the drive again.
CAUTION: Temporarily disabling BitLocker Drive Encryption can compromise drive security and
should only be attempted in a secure environment. If you are unable to provide a secure
environment, HP recommends providing the boot password and leaving BitLocker Drive Encryption
enabled throughout the firmware update process. This requires setting the /tpmbypassparameter
for HP SUM or the firmware update is blocked.
To temporarily disable BitLocker support to allow firmware updates:
1. Click Start, and then search for gpedit.mscin the Search Text box.
2. When the Local Group Policy Editor starts, click Local Computer Policy.
3. Click Computer Configuration→Administrative Templates→Windows Components→BitLocker
Drive Encryption.
4. When the BitLocker settings are displayed, double-click Control Panel Setup: Enable Advanced
startup options.
5. When the dialog box appears, click Disable.
6. Close all windows, and then start the firmware update.
To enable advanced startup options:
1. Enter cscript manage-bde.wsf -protectors -disable c:
2. When the firmware update process is completed, the BitLocker Drive Encryption support can
be re-enabled by following steps 1 through 4 but clicking Enabled in step 5 instead. The
following command can be used to re-enable BitLocker Drive Encryption after firmware
deployment has completed.
3. Enter cscript manage-bde.wsf -protectors -enable c:
8
Downloading and installing an SPP
Download from Www.Somanuals.com. All Manuals Search And Download.
The following table describes TPM detection scenarios that you might encounter.
Scenario
Result
If TPM is detected and enabled, the installation is not silent, A warning message appears. Select OK to continue. The
and a system ROM must be updated.
installation is not canceled.
If TPM is detected and enabled, the installation is silent,
No warning appears. A new log file is generated
the /tpmbypassswitch is not given, and any firmware (%systemdrive%\cpqsystem\log\cpqstub.log).
updated must be applied to the server.
Because the installation is silent, the installation is
terminated and cannot continue.
If TPM is detected and enabled with Option ROM
A warning message appears. After selecting OK, you can
Measuring, the installation is not silent, and a system ROM continue. The installation is not canceled.
must be updated.
If TPM is detected and enabled with Option ROM
Measuring, the installation is silent, the /tpmbypass
switch is not given, and any firmware updated must be
applied to the server.
No warning appears. A new log file is generated
(%systemdrive%\cpqsystem\log\cpqstub.log).
Because the installation is silent, the installation is
terminated and cannot continue.
If TPM is detected and enabled, the installation is silent,
the installation occurs, and the /tpmbypassswitch is
supplied.
The installation occurs.
Initiating deployment
Use the HP SUM GUI to deploy SPP components in online or offline interactive modes to local or
remote hosts. For detailed instructions and prerequisites see the HP Smart Update Manager User
Online mode
To initiate deployment in online mode:
2. Launch HP SUM from the root of the ISO:
•
•
Windows: \hp\swpackages\hpsum.exe
Linux: /hp/swpackages/hpsum
TIP: If you are updating only firmware or software, use a filter argument:
• /romonly— With this filter switch, HP SUM only displays firmware components needed
for installation.
• /softwareonly— With this filter switch, HP SUM only displays software components
needed for installation.
3. To review the EULA, locate Start.htmin the root of the ISO and open it in one of the
supported browsers.
4. Follow the instructions on the screen.
Offline mode
To initiate deployment in offline mode:
1. Copy the SPP to a USB thumb drive, hard drive, or file system. When using a USB thumb
2. Boot the server to the SPP.
Using HP SUM to deploy an SPP
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select either automatic mode or interactive mode:
•
If you select automatic mode, the firmware will be updated on the server automatically
without further interaction.
•
If you select interactive mode, follow the instructions on the screen.
4. Select the Firmware Update option on the screen to start HP SUM.
Using a PXE server to deploy components from the full SPP ISO over a
network
Detailed information regarding deploying SPP versions over a PXE server is available in the HP
Prerequisites
Before proceeding with the configuration, you must have the following:
•
•
•
•
•
A good working knowledge of PXE and TFTP.
A network with a DHCP server.
A TFTP server configured on the same network as the DHCP server.
A network file server hosting the ISO images that can be accessed by a PXE booted system.
PXELINUX, available from the SYSLINUX website http://syslinux.zytor.com/wiki/index.php/
This procedure assumes you are using a Linux TFTP server, and the TFTP package available from
Using HP SIM to deploy an SPP
2. Launch HP SIM 7.0 or later. For more information on setting up and using other versions of
HP SIM, see the HP Systems Insight Manager Information Library at http://www.hp.com/go/
3. Click Tools→System Information→System Management Homepage.
4. Enter the server's IP address, and then click Run Now.
5. Click HP Version Control Repository Manager on the System Management Homepage.
NOTE: SPP requires VCRM version 7.0 or later.
6. Click Upload a support pack. Browse to the hp/swpackagesfolder in the update directory.
7. Click Upload.
8. After the upload finishes, go to the HP SIM home page. Choose a system to update.
9. Click the IP address of the server you want to update.
10. On the server details page, click Tools & Links.
11. Click System Credentials.
12. Enter the user credentials for the update target.
13. Go to the HP SIM home page.
14. Select the check box for the server you want to update.
15. Click Deploy→Deploy Drivers, Firmware and Agents→Install Software and Firmware.
10
Downloading and installing an SPP
Download from Www.Somanuals.com. All Manuals Search And Download.
3 SPP staging procedures
After downloading the SPP, stage it for update and deployment. Select the staging method most
adapted to your deployment processes.
NOTE: ProLiant configurable software components must be copied onto writable media for
configuration.
•
Creating a bootable USB key — Extracting the ISO to a bootable USB key is the easiest way
to make the SPP available when you have physical access to a single or small number of
servers. The USB key is writable, so it is suitable for all SPP components.
◦
◦
Linux — For instructions on using SYSLINUX, see “Creating a bootable USB key with
IMPORTANT: When using OA, copy the SPP to the USB key directly, leaving it in its ISO
package.
•
•
Mounting the ISO — Mounting the ISO from the local file system is the easiest way to deploy
components from the SPP if you have network access to a target server with a running operating
Copying the SPP to a hard drive — Copying the ISO to a hard drive is useful when preparing
the SPP to update remote servers. The hard drive is writable, so it is suitable for all SPP
components. For instructions on copying the SPP to a hard drive, see “Copying the SPP to a
Adding or removing components from an SPP
You can add or remove components from an SPP and optionally create a custom ISO. You might
want to add or remove a component from the SPP to:
•
•
•
Incorporate a Hot Fix or newly released component that is not part of the SPP into your SPP
baseline.
Ensure that only necessary files are loaded onto the system, which can make tracking changes
easier if troubleshooting is required.
Maintain compatibility with third-party products. For example, if HP releases an update to
your FC HBA, but the vendor of your external switch does not support the HP version, you can
remove this update to continue to receive support from the switch vendor.
NOTE: Modified SPPs cannot be deployed with HP Intelligent Provisioning.
The easiest way to create a custom SPP is with the HP SUM custom baseline feature. If you prefer
not to use HP SUM, select the method that results in the format needed for your update process.
•
Directory with files — This process leaves the modified SPP in a regular file system folder or
directory. You can run HP SUM without creating and mounting an ISO. See “Creating a
•
Creating a directory with files
To add or remove components from the SPP:
Adding or removing components from an SPP
11
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Download the SPP ISO that best meets your needs and extract it onto writable media, such
as a USB key or hard drive.
2. Download any Hot Fixes or other components that you want to add to your ISO. Place them
in the \hp\swpackagesdirectory of the SPP.
NOTE: If you want to keep Hot Fixes separate from SPP components, place them in a different
directory, such as \hp\hotfixes.
3. Remove any unneeded components from the \hp\swpackagesdirectory.
4. Validate your custom solution before applying it to the targets. Doing this in a lab environment
will minimize downtime.
Creating a custom ISO
HP SUM 6.2.0 and later supports creating custom baseline and bootable ISOs when you have a
source ISO, which HP SUM 6.2.0 and later includes. You can download the latest version of HP
Add the baselines that include the updates you want to apply to your nodes, and then use the
Create Custom baseline function. For more information, see the HP Smart Update Manager User
To create a custom ISO:
1. Download an SPP ISO.
2. Use an ISO editor to add components to or remove components from the ISO.
NOTE: There are several ISO creation applications available. If you are creating a bootable
ISO, verify that the application you are using can create a valid boot record for your operating
system. You can use HP SUM 6.2 to create a bootable ISO that requires no third-party
applications.
Using the HP USB Key Utility
The HP USB Key Utility is a Windows application that enables you to copy SPP and other CD or
DVD images to a USB flash drive.
Prerequisites
Installing applications onto a USB flash drive requires a supported source CD, DVD, or ISO, and
a USB flash drive with adequate storage space for storing the source contents. The USB Key Utility
requires a USB 2.0 flash drive with a storage size larger than the media or ISO image (2 GB or
greater).
Creating a bootable USB key
After installation, the utility places a shortcut in HP System Tools in the Programs Start menu folder.
To create a bootable USB key:
1. Double-click the HP USB Key Utility shortcut in the HP System Tools folder.
12
SPP staging procedures
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Complete each step as presented by the application:
a. Click Next at the splash screen.
b. Read the End-User License Agreement, and then select Agree and click Next.
c. Select Create a bootable USB key from CD/DVD, and then click Next.
d. Place the USB flash drive in an available USB port. Insert the media in the optical drive
or mount the ISO image, and then click Next.
e. Choose the drive letter of the source, choose the drive letter of the target USB flash drive,
and click Next.
CAUTION: All data on the target USB key will be deleted.
f. Click Next on the warning message screen. The USB flash drive is formatted, and the
source contents are copied to the USB flash drive.
g. Click Finish to display the README.TXTfile.
Adding additional content to a bootable USB key
HP USB Key Utility supports multiple images on a single USB flash drive (provided there is adequate
space available on the USB flash drive). To create a bootable USB key with multiple CD and DVD
images, each image transferred to the USB key must support the multi-boot feature.
1. Follow the instructions for creating a bootable USB key.
2. Double-click the HP USB Key Utility shortcut in the HP System Tools folder.
Using the HP USB Key Utility
13
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Complete each step presented by the application:
a. Click Next at the splash screen.
b. Select Agree, and then click Next after reading the End-User License Agreement.
c. Select Add an additional CD/DVD to a bootable USB key, and then click Next.
d. Place the USB flash drive in an available USB port. Insert the media into the optical drive
or mount the ISO image, and then click Next.
e. Choose the drive letter of the source, choose the drive letter of the target USB flash drive,
and then click Next.
f. Click Next on the informational screen. The source contents are copied to the USB flash
drive.
g. Click Finish to display the README.TXTfile.
4. Repeat steps 2-3 for each source media or image to be transferred to the USB key.
Mounting an ISO
You can access the ISO contents directly by mounting the ISO file:
1. Use virtual CD/DVD image software available from various software suppliers to mount the
SPP ISO.
2. Navigate to the \hp\swpackagesfolder on the mounted directory.
3. To run HP SUM, double-click hpsum.exe(Windows) or hpsum(Linux) and then follow the
instructions on the screen.
Copying the SPP to a hard drive
To deploy SPP components with HP SUM using a hard drive:
1. Copy the contents of the \hp\swpackagesdirectory from the SPP ISO image to a directory
on the hard drive where HP SUM will be executed.
2. For Linux, ensure that execute privileges are available by using the chmod -R 700*command.
3. Copy any Hot Fixes into the directory where the files were copied in step 1. To keep the Hot
Fix components separate, place them in a separate directory, such as \hp\hotfixes.
4. Run HP SUM.
14
SPP staging procedures
Download from Www.Somanuals.com. All Manuals Search And Download.
4 SPP usage scenarios
This chapter contains high-level procedures that illustrate typical uses of the SPP. You can leverage
these scenarios to learn about the SPP, adapt your custom installation and update procedures to
use the SPP, or evaluate the SPP for use in your environment.
NOTE: It is important to note that features, functions and sometimes the interface will differ
between versions of HP SUM included in the SPP release. Scenarios and screen excerpts may not
match those in your environment. See detailed procedures for each HP SUM version at http://
Local bootable firmware update for a standalone server
This scenario updates the server firmware using the bootable method, which updates firmware
identified by the HP SUM pre-installation environment. This is a good method for installing or
updating a system without an operating system.
1. Download the bootable and complete SPP ISO.
2. Determine the target system and connect via iLO.
a. Connect to the target system’s console.
b. Connect the bootable SPP ISO to the iLO virtual media.
3. Boot the server to the ISO.
When the server boots to the pre-installation environment, the HP SUM GUI launches.
4. Click Localhost Guided Update to begin an interactive or online update.
•
•
•
HP SUM scans the SPP repository.
HP SUM scans the local machine for outdated components.
HP SUM provides a report of available firmware components against the installed firmware
components.
•
HP SUM identifies dependencies and updates the firmware.
For more information, see the HP Smart Update Manager User Guide.
Local and remote node firmware update
This is a method for updating the localhost node and remote nodes. Launch the SPP from a local
system, use HP SUM to add baseline, nodes, inventory the nodes, and then deploy updates. This
process should not require rebooting an online server. This type of update is typically used to
update infrastructure firmware.
NOTE: Run HP SUM on the same operating system as the remote node you are updating. For
example, to update a Linux node, run HP SUM on a Linux host.
1. Download the bootable and complete SPP ISO.
2. Unpack the ISO to a local directory or share, or mount the ISO to a local virtual drive.
3. In the root directory, double-click Start.htm, and then follow the on-screen instructions.
4. Launch HP SUM, and then add the SPP ISO as a baseline. For more information, see the HP
Smart Update Manager User Guide.
5. Obtain the OA IP address for the BladeSystem chassis you want to inventory and update.
6. In HP SUM, click Add Node on the Nodes screen, and then fill in the information for the node.
7. Click Actions+Inventory.
8. When HP SUM finishes the inventory process, if there are updates available for your node,
click Actions+Review/Deploy.
Local bootable firmware update for a standalone server
15
Download from Www.Somanuals.com. All Manuals Search And Download.
9. HP SUM automatically selects updates. Select or deselect updates that you want to apply or
not apply. If you make any changes, click Analysis.
10. Click Deploy to begin deployment.
Scripted online update for Linux server
This is a method that updates all of the software components for an online Linux server in a scripted
method using an answer file. A similar process can be used for a Windows server, provided HP
SUM is launched from a Windows server. The scripting answer files are similar for both the
Windows and Linux environments.
Both SPP and HP ProLiant Support Pack (PSP) use HP SUM, so a scripted installation that worked
for PSP 9.10 should work with SPP. Always check the HP SUM Release Notes for changes that
may affect your scripts.
1. Download the bootable and complete SPP ISO.
2. Unpack or mount the SPP ISO to a local directory or share, or mount the ISO to a local virtual
drive to gain access to HP SUM.
3. Prepare an answer file based on the command line options.
For HP SUM command line options, see the HP Smart Update Manager User Guide.
Example answer file
4. Initiate HP SUM with the answer file:
./hpsum/s/softwareonly/answerfile
The /softwareonlyswitch tells HP SUM to update software components, such as drivers
and agents.
The /answerfilelocation must be a valid path.
16
SPP usage scenarios
Download from Www.Somanuals.com. All Manuals Search And Download.
5 FAQs
This chapter provides typical questions and answers about using SPP.
How can I determine which SPP version I am using?
You can view the HP SPP version information in the Start.htmfile in a web browser. The file is
in the root directory of the HP SPP.
Where can I find information for adding or removing components from
an SPP?
Specific procedure information is available in the HP ProLiant and Integrity Firmware Management
You can add or remove components from the SPP, to:
•
•
•
Incorporate a Hot Fix or newly released component that is not part of the SPP into your SPP
baseline.
Ensure that only necessary files are loaded onto the system, which can make tracking changes
easier if troubleshooting is required.
Maintain compatibility with third-party products. For example, if HP releases an update to
your FC HBA, but the vendor of your external switch does not support the HP version, you can
remove this update to continue to receive support from the switch vendor.
NOTE: Modified SPPs cannot be deployed with HP Intelligent Provisioning. Use HP SUM to
For general instructions on adding or removing components from an SPP, see:
•
To modify an SPP that has been extracted from its ISO, see “Creating a directory with files”
•
Does the SPP need to be in its ISO format or extracted?
Whether the SPP needs to be in its ISO format or extracted is determined by the tool used, for
instance offline updates are booted from an ISO.
When should I use online versus offline mode?
In online mode, the installation occurs while the host processor is running in the normal server
environment. For example, if the server runs Microsoft Windows Server 2008, the update occurs
under this environment. The update does not require the server to be booted to a special environment
to update the firmware. You might need to reboot the target to activate the firmware. HP recommends
using online mode when possible.
Offline mode supports firmware updates only. HP SUM boots a small Linux kernel and enables
updates to occur on a single server. In offline mode, you can only update the local system using
a single repository, and some features of HP SUM that require the regular local host operating
system are not supported. HP recommends using offline mode when necessary, and in the following
situations:
•
•
Installing or updating components that are only supported in offline mode.
The target does not have a supported or functional operating system.
How can I determine which SPP version I am using?
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Where can I find information on planning updates for data centers and
corporate environments?
The HP ProLiant and Integrity Firmware Management Best Practices Planning and Implementer
the SPP in data centers and corporate environments.
•
•
•
HP ProLiant and Integrity Firmware Management Best Practices Overview – Provides information
about keeping your system environment updated and running at its best.
HP ProLiant and Integrity Firmware Management Best Practices Planning Guide – Provides an
outline for creating a firmware update plan to follow before updating your server environment.
HP ProLiant and Integrity Firmware Management Best Practices Implementer Guide – Provides
examples for implementing updates.
You can download these documents from the SPP Information Library at http://www.hp.com/go/
How can I install firmware or software components only?
You can use HP SUM to deploy firmware or software components separately.
In GUI mode create a custom baseline that includes only firmware or software components.
In CLI mode, use the following commands:
• /romonly— With this filter switch, HP SUM only displays firmware components needed for
installation.
• /softwareonly— With this filter switch, HP SUM only displays software components
needed for installation.
NOTE: For more information on using HP SUM, see the HP Smart Update Manager User Guide.
How does HP SUM work when applied to an entire chassis?
HP SUM performs dependency checking on targets, which ensures that all dependencies are met
before an update begins. The HP SUM discovery process also detects the required updates for
targets and allows HP SUM to perform updates in the correct order.
Is there a silent option to install an SPP?
The HP SUM CLI and input file modes each have a /silentparameter. In offline mode, you can
use automatic mode to install firmware that needs to be updated. For more information on using
these modes, see the HP Smart Update Manager User Guide.
When upgrading an entire c7000 Enclosure and all of its constituents,
can I just give HP SUM the OA IP address?
•
Can I simply give the HP SUM tool the OA IP address?
•
Is the tool able to upgrade all of the components inside the chassis because the OA can
automatically identify the addresses of the iLOs and modules?
•
•
Do I have to manually add IP addresses of the blades, iLOs, modules, and so on, into the HP
SUM GUI interface, thereby creating my own group, which is, in effect, the enclosure and all
of its contents?
Must I always manually add the host OS IP address that upgrades the blade server BIOS
because the OA cannot identify what it is?
18
FAQs
Download from Www.Somanuals.com. All Manuals Search And Download.
HP SUM updates all server firmware in online mode. HP SUM updates the OA through the OA
interface, not through the NIC interface. The SPP provides the firmware versions used to update
the server firmware.
Provide the IP address or DNS name for G7 and earlier targets that you want to update. HP SUM
detects the OA host servers list on targets, and if you added servers to the OA host servers list, HP
SUM will ask if you want to add the target.
If you are using a Gen8 server that is running AMS, you do not need to provide an IP address.
What is the order for updating an enclosure?
The update order depends on whether an operating system is already installed and the VC firmware
version.
•
•
With VC firmware earlier than 1.34, OA and the blades can be updated concurrently.
With VC firmware 1.34 through 3.00:
◦
Without an operating system, update the blade infrastructure firmware (OA or VC) first
and then the blades (offline).
◦
With an operating system, update the OA first, and then update the blades (online) and
VC concurrently.
•
With VC firmware greater than 3.00, you must install OA firmware 3.00 first.
SPP does not support Windows 2003. What should I do if I have a
Windows 2003 server?
HP recommends that you continue to use PSP 8.70 and the Smart Update Firmware DVD 9.30 to
update Windows 2003. You can also update firmware in offline mode with SPP 2011.09.0.
What is the order for updating an enclosure?
19
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Troubleshooting
This chapter gives general information for generating reports and gathering logs to troubleshoot
SPP issues.
For a listing of known limitations, see the HP Service Pack for ProLiant Release Notes for your
NOTE: Due to differences between versions for gathering logs and generating reports see the
HP SUM product documentation for your particular environment on the SPP Information Library.
Generating and viewing reports
You can generate either an HTML or XML report file detailing the repository contents, target
firmware, target install details, and failed dependencies. You can view both files in a web browser,
such as Microsoft Internet Explorer. The reports support JavaScript-enabledweb browsers
Internet Explorer 6.0 or Mozilla Firefox 3.5 and later. The XML reports also allow you to write
programs to extract report information and display it at other locations.
NOTE: Not all reports are available on all screens. If a report is not available, HP SUM colors
it gray and it cannot be selected..
Generating a Report
HP SUM can generate reports from the Nodes screen after you have inventoried nodes.
To generate a report
1. From the Nodes screen, select a report or multiple reports, and then click Actions→Report.
2. Select the reports you want to generate:
•
•
•
•
Firmware details: This displays firmware versions that are currently installed on the node.
Deploy preview: This displays components that HP SUM can install on the node.
Failed Dependency details: This displays any failed dependencies on the node.
Last deploy details: This displays details about what HP SUM installed on a node.
NOTE: If you cannot select a report, HP SUM might not have enough information to generate
the report.
3. Click the report format you want HP SUM to generate, HTML, CSV, or XML.
NOTE: HP SUM automatically opens the report after it finishes generating the report. If you
do not have the format associated to an application, HP SUM prompts you to save the report.
4. Click Generate.
Collecting trace directories
In HP SUM 5.x, HP SUM generates a set of debug trace logs located in the %TEMP%\HPSUM
directory on Windows systems. These files contain internal process and debug information which
can be useful in determining HP SUM failures. In HP SUM 6.x, the files are stored in the %temp%\HP
SUM for 6.xdirectory.
In HP SUM 5.x, the debug trace files are located under %temp%\hp_sumfor Windows. The log
files are located under C:\cpqsystem\hp\log. These files provide the following information
and are appended in each HP SUM session.
20 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
HP SUM 5.0.0 and later includes a utility named GatherLogs.bat(Windows) or
Gatherlogs.sh(Linux) to create a compressed .zip (Windows) or tar.Z (Linux) file with all the
logs. If you need to review the log files, you can run this utility to gather all the logs in one file.
NOTE: Exit HP SUM before running the GatherLogs utility.
The following are the debug files for HP SUM 5.x.
Debug Trace Files
Function
InventoryResults.xml
Contains details of the component inventory from the
repositories.
Settings.xml
Includes general settings information of HP SUM such as
Force downgrade or upgrade.
SourceClient.trace
Includes trace data of repository manager and general
errors if any.
Hpsumiserver\Hpsumiserver.log
Hpsumiserver\HpsumserverW32.log
Contains trace data for HP SUM SOAP server sessions.
Contains remote trace data for HP SUM SOAP server
sessions.
Hpsumiserver\localhpsumsoapserver.log
Sesssion.log
Contains information of the HP SUM SOAP server.
Contains the data and time each session started. This file
is saved in a separate directory named with the date.
RepositoryManager
Provides the repository and component information. This
directory can be excluded in the trace data when collecting
the trace files.
<target>\Discoverymanager.log
Provides the details of interaction between the Operations
Manager and the remote discovery client. If a discovery
tool fails, it is reported to this trace file and surfaced as a
Discovery Failedmessage. This log is target specific.
<target>\Installmanager.log
Provides the interaction between the Operations Manager
and the remote discovery client. If a discovery tool fails, it
is reported to this trace file and surfaced as a Discovery
Failedmessage. This log is target specific.
<target>\<target name>_log.txt
Provides the trace data from operations manager for a
specific target.
<target>is the name of the target in the source selections
screen.
<target>\Settings.xml
Provides general settings information of HP SUM such as
Force downgrade or upgrade for a specific target.
Log Files
Function
<target>\hpsum_log.txt
Contains information of HP SUM discovery, installation
status and errors if any.
<target>is the name of the target in the source selections
screen.
Hpsum_detail_log.txt
hpsum.ini
Contains the log data of the components.
Stores persistent data on the user's system.
Collecting trace directories
21
Download from Www.Somanuals.com. All Manuals Search And Download.
HP SUM 6.0.0 trace directories
In HP SUM 6.x, trace directories are stored in the /tmp/HPSUM (Linux) and %temp%\HPSUM
(Windows) directories. HP SUM creates trace directories for each function and node that HP SUM
updates.
If you are running HP SUM in offline mode, use the following instructions to
collect trace directories and logs.
1. Launch HP SUM in offline mode.
2. Launch the command prompt from the HP SUM GUI by pressing CTRL-ALT-D-B-X.
NOTE: After approximately 30 seconds, the command prompt appears over the HP SUM
GUI window.
3. Change the directory to the one running HP SUM. For example, cd
/mnt/bootdevice/SPP2012060B/hp/swpackages.
4. Type ./gatherlogs.shto collect the HP SUM logs. All logs are collected in a .tar.gz
file in the directory where you placed HP SUM or in a temp directory if the HP SUM directory
is read-only. The log file is named HPSUM_Logs_$(datetime).tar.
5. Place the logs on a removable media if you want to view them on another computer.
22 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Support and other resources
SPP support policy
For the support period of each active SPP, see the HP Service Pack for ProLiant Release Notes on
the SPP Information Library.
Information to collect before contacting HP
Be sure to have the following information available before you contact HP:
•
Active Health System log (HP ProLiant Gen8 servers only).
Download and have available an Active Health System log for seven days before the failure
•
OA SHOW ALL report (for HP BladeSystem products only)
•
•
•
•
•
•
•
•
Technical support registration number (if applicable)
Product serial number
Product model name and number
Product identification number
Applicable error messages
Add-on boards or hardware
Third-party hardware or software
Operating system type and revision level
How to contact HP
Use the following methods to contact HP technical support:
•
•
•
See the Contact HP worldwide website: http://www.hp.com/go/assistance
In the United States, call +1 800 334 5144 to contact HP by telephone. This service is available
24 hours a day, 7 days a week. For continuous quality improvement, conversations might be
recorded or monitored.
Subscription service
Receive, by email, support alerts announcing product support communications, driver updates,
software releases, firmware updates, and customer-replaceable component information by signing
To change options for support alerts you already receive, click the Sign in link on the right.
Related information
The SPP website contains documents, Customer Advisories, and a video library: http://
•
•
HP Service Pack for ProLiant Release Notes
HP Service Pack for ProLiant Support Guide
SPP support policy 23
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
HP ProLiant firmware management best practices guides
Contents reports, listing the contents of each SPP
The SPP Download page includes current and archived SPP downloads, Hot Fixes, and advisories
The HP Systems and Server Software Management page includes links to ProLiant server
For information on the HP Systems Insight Manager, see the following documents on the HP Systems
•
•
HP Systems Insight Manager Installation and User Guide
HP Systems Insight Manager Help Guide
For more information about ProLiant Gen8 server and software see the HP website: http://
For information about HP Insight Control Management Software, see the HP website: http://
For information about operating systems supported by ProLiant servers, see the operating system
For information about support for updating SATA hard drives in a Modular Smart Array
20/50/60/70 storage enclosure connected to a ProLiant server using a Smart Array controller,
see the support matrix on the HP StorageWorks Modular Smart Arrays website: http://
Typographic conventions
Table 1 Document conventions
Convention
Element
Blue text: Table 1 (page 24)
Blue, underlined text: http://www.hp.com
Bold text
Cross-reference links and e-mail addresses
Website addresses
•
•
•
Keys that are pressed
Text typed into a GUI element, such as a box
GUI elements that are clicked or selected, such as menu
and list items, buttons, tabs, and check boxes
Italic text
Text emphasis
Monospace text
•
•
•
•
File and directory names
System output
Code
Commands, their arguments, and argument values
Monospace, italic text
Monospace, bold text
•
•
Code variables
Command variables
Emphasized monospace text
CAUTION: Indicates that failure to follow directions could result in damage to equipment or data.
IMPORTANT: Provides clarifying information or specific instructions.
24 Support and other resources
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: Provides additional information.
TIP: Provides helpful hints and shortcuts.
HP Insight Remote Support software
HP strongly recommends that you register your device for remote support to enable enhanced
delivery of your HP Warranty, HP Care Pack Service, or HP contractual support agreement. HP
Insight Remote Support supplements your monitoring continuously to ensure maximum system
availability by providing intelligent event diagnosis, and automatic, secure submission of hardware
event notifications to HP, which will initiate a fast and accurate resolution, based on your product’s
service level. Notifications may be sent to your authorized HP Channel Partner for onsite service,
if configured and available in your country.
For more information, see HP Insight Remote Support and Insight Online Setup Guide for ProLiant
enterprise/docs). HP Insight Remote Support is available as part of HP Warranty, HP Care Pack
Service, or HP contractual support agreement.
HP Insight Online
HP Insight Online is a capability of the HP Support Center portal. Combined with HP Insight Remote
Support 7.x, it automatically aggregates device health, asset, and support information from iLO
Management Engine with contract and warranty information, and then secures it in a single,
personalized dashboard that is viewable from anywhere at any time. The dashboard organizes
your IT and service data to help you understand and respond to that information more quickly.
With specific authorization from you, an authorized HP Channel Partner can also view your IT
environment remotely at HP Insight Online.
For more information, see the following documents on the HP website (http://www.hp.com/go/
•
•
For more information about using HP Insight Online, see the HP Insight Online User’s Guide.
For more information about installing HP Insight Remote Support and enabling HP Insight
Online, see the HP Insight Remote Support and Insight Online Setup Guide for ProLiant Gen8
Servers and BladeSystem c-Class Enclosures.
HP Insight Remote Support software 25
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Documentation feedback
HP is committed to providing documentation that meets your needs. To help us improve the
documentation, send any errors, suggestions, or comments to Documentation Feedback
when submitting your feedback.
26 Documentation feedback
Download from Www.Somanuals.com. All Manuals Search And Download.
A Creating a bootable USB key with SYSLINUX
To create a bootable USB key with Linux:
workstation.
2. Install the SYSLINUX RPM obtained in the previous step.
3. Create a directory for the USB key mount point if one does not already exist. For example,
mkdir /usbkey
NOTE: The device mount point can vary depending on whether other SCSI drives are also
installed on the server. Thus, the device mount point might be sdb1, sdc1, etc.
4. Insert the USB key and mount it. For example,
mount /dev/sda1 /usbkey
5. To make the key bootable, write the boot partition to the USB key:
./syslinux /usbkey
6. Create a directory to mount the SPP. For example,
mkdir /spp_mount_point
7. Mount the SPP via a loopback. For example,
mount —t iso9660 spp.<version>.iso /spp_mount_point —o loop
8. Change to the directory on the mounted SPP ISO.
cd /spp_mount_point/usb
9. Run the usbcreator.shscript, passing in the SPP mount point and the USB mount point to
move the SPP files to the USB key. For example,
./usbcreator.sh /spp_mount_point /usbkey
10. If you want to add Hot Fixes or other components, copy them to the /hp/swpackages
directory on /usbkey.
NOTE: HP SUM will install additional components that it finds in the /hp/swpackages
directory. Intelligent Provisioning will not update additional components.
11. Unmount the SPP ISO and USB key. For example,
umount /dev/sda1
umount spp.<version>.iso
12. Remove the USB key.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
DUD
Driver User Diskette
EFM
Enclosure Firmware Management – a feature of OA
host bus adapter
HBA
HP iLO
HP SUM
LDU
Integrated Lights-Out
HP Smart Update Manager
Linux Deployment Utility
Linux Loader
LILO
OA
Onboard Administrator
POST
PSP
Power-On Self-Test
HP ProLiant Support Pack
HP ROM-Based Setup Utility
Remote Insight Board Command Language
Red Hat Package Manager
serial attached SCSI
RBSU
RIBCL
RPM
SAS
SDR
Software Delivery Repository
HP System Management Homepage
Simple Object Access Protocol
HP Service Pack for ProLiant
Secure Shell
SMHP
SOAP
SPP
SSH
SSL
Secure Sockets Layer
SUV
TPM
serial, USB, video
Trusted Platform Module
Universal Naming Convention
Virtual Connect
UNC
VC
VCA
VCRM
WMI
XML
Version Control Agent
Version Control Repository Manager
Windows Management Instrumentation
extensible markup language
28 Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
software only, 9
ISO
A
B
baseline
M
C
O
conventions
operating system support, 5
P
document, 24
corporate environment
PXE server
D
R
data center
deployment modes, 5
deployment overview, 7
document
related documentation, 23
release versions, 5
reports
Generate and View Reports, 20
reports, creating
Generate a Report, 20
conventions, 24
related documentation, 23
documentation
providing feedback on, 26
S
SPP
release versions, 5
what is, 5
SPP Supplement, 5
Supplement, 5
F
H
hard drive
T
help
technical support
obtaining, 23
Hot Fix
HP
TPM (Trusted Platform Module)
Trusted Platform Module, 9
troubleshooting
technical support, 23
HP Insight Online, 25
HP SIM
HP SUM
Troubleshooting, 20
Trusted Platform Module, 8
Trusted Platform Module (TPM)
Trusted Platform Module, 9
typographic conventions, 24
deployment modes, 5
initiating deployment, 9
U
update interview, 7
USB key
creating with SYSLINUX, 27
I
W
installation overview, 7
installing
firmware only, 9
29
Download from Www.Somanuals.com. All Manuals Search And Download.
|