hp fax
1230 series
reference guide
Download from Www.Somanuals.com. All Manuals Search And Download.
contents
front panel overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
load paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
use the fax features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
send a basic fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
receive a fax manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
set up speed-dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
schedule a fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
poll for faxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
generate system reports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
set new defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
i
Download from Www.Somanuals.com. All Manuals Search And Download.
contents
set the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
enter text. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
set the paper size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
set tone or pulse dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
adjust the volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
set advanced fax settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
set automatic reduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
fax options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
make copies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
make a basic copy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
change copy settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
set the number of copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
set new defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
perform special copy jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
prepare a color t-shirt transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
copy options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
clean the exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
work with print cartridges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
print a self-test report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
handle print cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
replace the print cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
clean the print cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
restore factory defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
setup menu options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
ii
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
print cartridge problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
output problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
copy problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
fax problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
copy specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
physical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
power specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
hp customer support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
prepare your hp fax for shipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
hp fax 1230 series warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
warranty service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
contents
iv
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
get started
1
This HP Fax 1230 series Reference Guide contains all the information you need
to get started, and describes how to fax, make copies, and maintain your
HP Fax 1230 series (HP Fax). To get started, review this section for information
on getting help and use it to familiarize yourself with the HP Fax front panel.
get help
Review the table below to learn about the help options available to you.
help
description
Setup information
The Setup Poster provides instructions for setting up and configuring your
HP Fax. The printed Setup poster is in the box with your HP Fax.
General product
information
The HP Fax 1230 series Reference Guide contains information on using
your HP Fax. The Reference Guide also contains information on how to
order supplies and accessories, technical specifications, support, and
warranty information.
Help and technical
support
If you have Internet access, you can get more information from the
HP website at:
The website also provides answers to frequently-asked questions.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
get started
front panel overview
Use the front panel buttons to copy and fax documents or photos, and to change
a variety of copy and fax settings.
Review the illustration below and identify the location of the buttons on the front
panel.
14
15 16
5
4
6
3
1
2
17
18
19
20
11
12 13
7
8
9
10
feature
purpose
1
One-touch speed-dial buttons: Enter and label speed-dial numbers for quick
access.
2
3
4
5
Auto Answer light: If lit, automatic answering is on.
Auto Answer button: Turn automatic answering for HP Fax on or off.
Speed Dial button: Access speed-dial numbers.
Redial/Pause button: Dial the last number again, or insert a pause in a number
to be dialed.
6
Keypad: Dial fax numbers or enter text.
7
Star/Symbols key: Enter punctuation characters or use as directed in voice mail.
Pound/Space key: Enter spaces or use as directed in voice mail.
Fax button: Press to begin the faxing process.
8
9
10
11
12
13
14
15
Start, Black button: Start a black-and-white fax or copy.
Scan & Fax button: Press to scan originals into memory before faxing.
Start, Color button: Start a color fax or copy.
Copy button: Press to begin the copy process.
Resolution button: Press to change the resolution for faxes and copies.
Setup button: Access various unit settings.
2
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
front panel overview
feature
16
purpose
On button: Turn the HP Fax on and off.
Options button: Access various fax and copy options.
17
18
Left and Right arrows: Scroll through fax and copy option settings, or move
forward and backward in a text entry.
19
20
Enter button: Select or save displayed setting.
Cancel button: Stop job or exit menu.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
get started
4
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
load originals and load paper
2
When you load your original document into the automatic document feeder
(ADF), you can copy it onto a variety of paper types, weights, sizes, and
transparency films. It's important to select the right paper, and to make sure it's
loaded correctly.
This section contains the following topics:
•
•
•
•
•
•
•
•
•
load originals
Load your original in the ADF, which is located above the front panel as
illustrated below, to copy it or to fax it.
If you are working with originals that are printed on 16-24 lb. (60-90 gsm) plain
paper or on HP Premium Inkjet Paper, you can load more than one page at a
time into the ADF. If you are working with photos or originals of an non-standard
size (no smaller than 3.25 x 3.25 inches or 82 x 82 millimeters), load them in
the ADF one page at a time. When working with fragile, torn, or odd-sized
originals, we recommend that you use a transparent document sleeve or sheet
protector (available from most office-product stores) for the original. Place a
single sleeve into the ADF with the sealed edge first and the transparent side
down.
Note: If you have trouble with originals feeding incorrectly, make sure the
ADF tray is snapped into position.
1
2
Place the original(s) in the ADF
with the printed side facing
toward the back and with the
top of the document pointing
down.
Adjust the document guides to
fit your document.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
load originals and load paper
load paper
Use the following procedure to load plain paper into the input tray. For tips on
loading special papers, transparency film, and postcards, see tips for loading
For best results, adjust the paper settings each time you change paper types or
1
Slide the paper-width and -length
guides to their outermost positions.
2
Tap the stack on a flat surface to
align the edges of the paper, and
then check the paper for the
following:
–
Make sure it is free of rips, dust,
wrinkles, and curled or bent
edges.
–
Make sure all the paper in the
stack is the same size and type.
3
With the output tray raised, insert
paper into the input tray until it
stops. The print side should be
facing down, and the letterhead or
top of page should be facing
forward. Do not overfill the input
tray because this may cause paper
jams.
4
Slide the paper-width and -length
guides in until they stop at the edges
of the paper. Make sure that the
paper stack lies flat in the input tray
and fits under the tab of the
paper-length guide.
5
To prevent paper from falling off the
tray, fully extend the output-tray
extender.
6
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
recommended papers
recommended papers
For the best print quality, we recommend using HP Premium Inkjet papers. Using
paper that is too thin, paper that has a slick texture, or paper that stretches easily
can cause paper jams. Using paper that has a heavy texture or does not accept
ink can cause printed images to smear, bleed, or not be filled in completely. For
more information about HP Premium Inkjet papers, check our website at:
Here is a list of HP papers you can use for copying:
•
HP Bright White Inkjet Paper delivers high-contrast colors and sharp text. It
is opaque enough for two-sided color usage with no show-through, which
makes it ideal for newsletters, reports, and flyers.
•
HP Photo Paper, Matte, HP Photo Paper, Glossy, HP Premium Photo Paper,
HP Premium Plus Photo Paper, and HP Premium High-Gloss Film are
high-quality, glossy-finish or matte-finish, photo-based papers. They look
and feel like photographs and can be mounted under glass or in an
album. Photo papers dry rapidly and resist fingerprints and smudges.
•
•
HP Inkjet T-Shirt Transfer Iron-Ons can be used to transfer your designs or
photos onto T-shirts, sweatshirts, and fabric crafts.
HP Premium Inkjet Transparency Film and HP Premium Plus Inkjet
Transparency Film makes your color presentations vivid and even more
impressive. This film is easy to use and handle and dries quickly without
smudging.
•
HP Everyday Photo Paper, Semi-Gloss or Matte, is coated on both sides for
two-sided copying. It is perfect for near-photographic reproductions and
business graphics for report covers, special presentations, brochures,
mailers, and calendars.
•
•
HP Premium Inkjet Paper is the ultimate coated paper for high-resolution
usage. A smooth, matte finish makes it ideal for your special documents.
HP Matte Greeting Cards, HP Glossy Greeting Cards, HP Felt-Textured
Greeting Cards, and HP Linen Greeting Cards allow you to make your own
greeting cards. HP Matte Greeting Cards are available in quarter-fold, and
HP Glossy Greeting Cards are available in half-fold.
•
•
HP Professional Brochure & Flyer paper is matte-coated or glossy-coated
on both sides for two-sided use. It is the perfect choice for
near-photographic reproductions and business graphics for report covers,
special presentations, brochures, mailers, and calendars.
16 to 36 lb. (60 to 135 gsm) copier paper or letterhead.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
load originals and load paper
papers to avoid
We do not recommend the following papers for copying:
•
•
•
Highly textured stock, such as linen. It may not print evenly, and the ink can
bleed into these papers.
Extremely smooth, shiny, or coated papers not specifically designed for
your unit. They can jam the unit or actually repel ink.
Multi-part forms (such as duplicate and triplicate forms). They can wrinkle
or get stuck. The ink is also more likely to smear.
•
•
•
•
•
•
•
•
Any size paper other than letter, A4, or legal
Paper heavier than 36 lb. (135 gsm) or lighter than 16 lb. (60 gsm)
Paper with cutouts or perforations
Photo paper other than HP Premium Photo
Envelopes
Transparency film other than HP Premium or Premium Plus
Heavyweight paper
Multiple-part forms or label stock
tips for loading other types of paper in the input tray
This section provides guidelines for loading special types of paper and
transparency film for copy jobs. For best results, adjust the paper settings each
time you change paper types and paper sizes. For more information, see set the
HP Inkjet T-Shirt Transfer Iron-On
Flatten the transfer sheet completely before using it; do not load curled sheets. To
prevent curling, keep transfer sheets sealed in the original package until you are
ready to use them. Manually feed one sheet at a time, with the unprinted side
facing down and the blue stripe facing up.
HP Premium or Premium Plus Inkjet Transparency Film
Insert the film so that the white transparency strip with arrows and the HP logo is
on top and goes into the tray first.
set the paper type
If you want to use a different type of paper, such as photo paper, transparency
film, t-shirt transfer paper, or brochures, simply load that paper in the input tray.
Then change the paper-type settings to ensure the best print quality.
HP recommends paper-type settings according to the type of paper you’re using.
to set the paper type for current copy job
1
2
Press Copy until Paper Type appears.
Press
until the appropriate paper type appears, and then press Enter to
select it.
3
Press Start, Black or Start, Color.
8
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
recommended paper-type settings for copying
to set the paper type for future copy jobs
1
2
Press Copy until Paper Type appears.
Press
until the appropriate paper type appears, and then press Enter to
select it.
3
4
Press Copy again until Set New Defaults appears. Press
until Yes
appears.
Press Enter to save your selection as the new default for all future copy
jobs.
recommended paper-type settings for copying
You can select the paper-type setting using the Copy button on the front panel.
To select the best paper-type setting for the paper type you wish to use, review
the following table.
paper type
paper-type setting
Plain Paper
Copier paper or letterhead
HP Bright White Inkjet Paper
HP Premium Plus Photo Paper, Glossy
HP Premium Plus Photo Paper, Matte
HP Everyday Photo Paper, Semi-Gloss
HP Everyday Photo Paper, Matte Finish
HP Premium Photo Paper
HP Photo Paper
Plain Paper
Premium Photo
Premium Photo
Everyday Photo
Premium Inkjet
Premium Photo
Photo Paper
Other Photo Paper
Photo Paper
HP Inkjet T-Shirt Transfer Iron-On
HP Premium Inkjet Paper
Iron-On
Premium Inkjet
Premium Inkjet
Other Inkjet Paper
HP Professional Brochure & Flyer Paper (Glossy) Brochure Glossy
HP Professional Brochure & Flyer Paper (Matte) Brochure Matte
HP Premium or Premium Plus Inkjet Transparency Transparency
Film
Other Transparency Film
Transparency
9
Download from Www.Somanuals.com. All Manuals Search And Download.
load originals and load paper
set the paper size
The HP Fax can print faxes and make copies onto letter, legal, or A4 paper.
to set the paper size for faxes
1
2
3
Press Setup until 3: Basic Fax Setup appears, and then press Enter to select
it.
After 1:Date and Time appears, press
then press Enter to select it.
until 4:Paper Size appears, and
Press
select it.
until the desired paper size appears, and then press Enter to
to set the paper size for copies
1
2
Press Copy until Paper Size appears.
Press
until the desired paper size appears, and then press Enter to
select it.
avoid jams
To avoid jams, remove papers from the output tray frequently. The allowable
output tray capacity is determined by the type of paper and the amount of ink
you are using. For more information about output-tray capacity, see input tray
10
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
use the fax features
3
Using the front panel of your HP Fax, you can:
•
Send and receive black-and-white and color faxes. If you send a color fax
and your HP Fax determines that the recipient has a black-and-white fax
unit, your HP Fax will send the fax in black and white.
•
•
Use one-touch speed-dial buttons or the Speed Dial button to send faxes to
frequently-used numbers.
Adjust your fax settings, such as enabling fax confirmation and setting the
number of rings to answer.
This section contains the following topics:
•
•
•
•
•
•
•
•
•
•
send a fax
Using the HP Fax you can:
•
•
•
•
•
•
send a basic fax
change fax settings before sending a fax
send a color fax
scan a fax into memory before sending
broadcast a fax to multiple recipients
send a fax using the numeric keypad to enter the number, using the
one-touch speed-dial buttons, or using the Speed Dial button
11
Download from Www.Somanuals.com. All Manuals Search And Download.
use the fax features
check for dial tone
Before using the fax features, verify that the connections are correctly
established.
Note: Make sure the volume is turned on. If you turn off the volume for your
HP Fax, you will not hear the dial tone. To verify that the volume is turned
1
2
3
4
Press Fax, and then press Start, Black or Start, Color.
Listen for a dial tone.
If you do not hear a dial tone, check the connections.
Press Cancel to hang up.
send a basic fax
Follow these steps to send a fax:
1
Load your original in the automatic document feeder (ADF).
2
Enter the fax number using the keypad, use one of the one-touch speed-dial
buttons, or press Speed Dial until the desired speed-dial entry appears. (For
3
Press Start, Black or Start, Color.
send a fax after temporarily changing settings
You can make changes to fax settings that will only affect the current fax job. For
example, you may want to temporarily change the resolution to Photo when you
are faxing a photo; you may not, however, want to change the default setting to
Photo for all your fax jobs. Follow these steps to make temporary changes to your
fax settings and then send the fax:
1
Load your original in the ADF.
2
3
Press Fax to scroll through the fax settings.
When you reach the setting you want to change, press
the setting options.You can change the resolution, contrast, and a number
of other settings.
to scroll through
4
5
When you reach the setting you want to change, press Enter to accept the
setting.
Enter the fax number using the keypad, use one of the one-touch speed-dial
buttons, or press Speed Dial until the desired speed-dial entry appears. (For
6
Press Start, Black or Start, Color to send the fax.
Tip — If you want to change additional fax settings before sending
the fax, press Fax again. When you reach the setting you want to
change, press
to scroll through the setting options. When you
reach the option you want to change, press Enter to accept it.
12
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
send a fax
send a color fax
You can send and receive color faxes to and from other color fax machines. If
your HP Fax determines that the recipient has a black-and-white fax machine, it
will send the fax in black and white.
We recommend that you use only color originals for color faxing. The color
originals must be loaded in the ADF; you cannot send a color fax from memory
using the Scan & Fax button or the group speed-dial features.
Follow these steps to send a color fax:
1
2
Load your original in the ADF.
Enter the fax number using the keypad, use one of the one-touch speed-dial
buttons, or press Speed Dial until the desired speed-dial entry appears. (For
3
Press Start, Color.
scan a fax into memory before sending
Your HP Fax can scan a fax into memory before sending. This feature is useful if
the fax number you are trying to reach is busy or temporarily unavailable. The
originals are scanned into memory before sending, and once the HP Fax is able
to connect, the fax is sent. This allows you to immediately remove the originals
from the HP Fax once the pages are scanned into memory. The HP Fax can store
up to 80 pages in memory (varies by model).
Note: You can only send a black-and-white fax.
Follow these steps to scan a fax into memory before sending:
1
Load your original in the ADF.
2
3
Press Scan & Fax.
Enter the fax number using the keypad, using one of the one-touch
speed-dial buttons, or by pressing Speed Dial until the desired speed-dial
4
Press Start, Black.
broadcast a fax to multiple recipients
Broadcasting a fax enables you to send a black-and-white fax to one speed-dial
group, which can contain up to 20 individual speed-dial entries. The entire
original must fit into the memory of your HP Fax, or the broadcast fax will not be
successful.
Before you can broadcast a fax to multiple recipients, you must first set up group
Follow these steps to broadcast a fax to multiple recipients:
1
2
3
Load your original in the ADF.
Press Speed-Dial until the desired group speed-dial entry appears.
Press Start, Black to begin faxing.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
use the fax features
receive a fax
You can set up your HP Fax to receive faxes either automatically or manually.
Your HP Fax is set at the factory to automatically print received faxes. As long as
the Auto Answer feature is turned on, your faxes will be printed automatically.
Tip — If you receive a legal-size fax and your HP Fax is not
currently set to use legal-size paper, the unit automatically reduces
the fax so that it fits on the paper that is loaded (unless you
disabled the automatic-reduction feature). For more information,
If you have an answering machine connected to the same line as your HP Fax,
you may need to set the number of rings required before the HP Fax begins
receiving the fax. The default number of rings before the HP Fax receives a fax
is 5. For more information on setting the number of rings to answer, see set the
with an answering machine connected directly to your HP Fax, see answer fax
receive a fax automatically
The Auto Answer feature is automatically enabled when you power-up your
HP Fax. If this feature is enabled, the green light next to the Auto Answer button
is lit. If it is not lit, use the following procedure to set up your HP Fax to receive
a fax automatically:
`
Press Auto Answer until the green light is on.
receive a fax manually
In certain situations you may want to receive faxes manually. For example, if you
subscribe to a voice mail service. (For more information, see connect and use
manually, you must be available to respond in person to the incoming fax call,
or your HP Fax cannot receive faxes.
Note: Before manually receiving a fax to your HP Fax, we recommend that
you remove any originals from the ADF so that they are not accidentally
processed.
To manually receive a fax, follow these steps:
1
2
Press Auto Answer until the green light is off.
When your HP Fax rings, pick up the handset of a telephone that is on the
same telephone line as your HP Fax.
3
Do one of the following:
–
If your phone is plugged into the back of the HP Fax, and you hear fax
tones, press Start, Black or Start, Color.
–
If you receive a call from an extension phone (one that is on the same
line but not connected directly to your HP Fax), press 1 2 3 on your
phone. Wait for the fax tones, then hang up the phone to receive the
fax.
4
After you are finished, hang up the telephone.
The HP Fax will receive and print the fax.
14
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
set up speed-dialing
receive a fax when the hp fax is out of paper
If the HP Fax runs out of paper, you will continue to receive faxes. While the
HP Fax is out of paper, the faxes are stored in memory and Out of paper is
displayed on the front panel. After loading paper in the input tray, you can print
the faxes in memory.
Note: If Auto Answer is enabled (green light next to the Auto Answer button
is lit) when the HP Fax runs out of paper, the green light will go off. Out of
paper will display on the front panel. The HP Fax will continue to receive
faxes automatically and store them in memory, until they can be printed.
Caution! Do not press Cancel before you print out the faxes stored
in memory. If you press Cancel before printing the faxes, all faxes
stored in memory will be deleted.
to print faxes from memory after an out of paper error
1
Load paper in the input tray.
2
Press Enter.
The faxes will automatically print.
set up speed-dialing
You can assign speed-dial entries to frequently-used fax numbers. Use the
one-touch speed-dial buttons on the front panel to quickly send faxes to an
individual or group. Press the Speed Dial button on the front panel to scroll
through and select from the list of speed-dial entries. You can create up to 100
individual and group speed-dial entries (varies by model).
create individual speed-dial entries
Use this setting to enter fax numbers that you use frequently. The first 10 entries
are automatically saved to the 5 one-touch speed-dial buttons. The one-touch
speed-dial buttons provide quick access to your frequently-used fax numbers.
Note: When you create more than five speed-dial entries, two speed-dial
will be assigned to a button. Press the one-touch speed-dial button
repeatedly to toggle between the numbers. For information on using
one-touch speed-dial buttons, see send a fax using a one-touch speed-dial
Follow these steps to create individual speed-dial entries:
1
2
Press Setup until 2:Speed Dial Setup appears. Press Enter.
When 1:Individual Speed Dial appears, press Enter.
The first unassigned speed-dial entry appears on the display.
3
4
Press Enter to select the displayed speed-dial entry.
Enter the fax number to assign to that number, and then press Enter.
Tip — To enter a two-second pause within a number sequence,
press Redial/Pause to insert a dash.
5
Enter the person’s or company’s name, and then press Enter.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
use the fax features
6
When Enter Another? appears, press 1 for Yes if you want to set up
another number or press 2 for No to exit.
create a speed-dial group
This feature allows you create groups of up to 20 speed-dial entries using your
individual entries so that you can send faxes to specific groups of people with
one speed-dial button.
Note: You can only assign previously entered speed-dial numbers to a
group. Additionally, only individual speed-dial entries can be added; you
can’t assign a group to another group.
Follow these steps to create a speed-dial group:
1
2
3
Press Setup until 2:Speed Dial Setup appears. Press Enter.
Press until 2:Group Speed Dial appears, and then press Enter.
Choose one of the following:
–
If this is your first group, the first unassigned number appears. Press
Enter to select it.
–
If this is not your first group, 1=New 2=Edit appears. Press 1 to create a
new group. The first unassigned number appears. Press Enter to select
it.
Tip — You can assign a speed-dial group to any unassigned
number using the keypad to manually enter the number you wish
to use.
4
5
When Add 1 of 20 appears, press
until the appropriate number
appears, and then press Enter to select it. The selected number and
corresponding name appear on the display.
Choose one of the following:
–
If the displayed fax number is correct, press Enter to add it to the
group.
–
To select a different fax number, press
appears, and then press Enter to select it.
until the appropriate number
6
7
When Add Another? appears, press 1 for Yes if you want to add another
individual number to the group, or press 2 for No.
When you are finished adding individual numbers to the group, enter a
name for the group.
8
9
Press Enter to save the group.
When Another Group? appears, press 1 for Yes if you want to create
another group, or press 2 for No to exit.
Tip — You can print a complete list of your assigned speed-dial
entries for your reference. For information, see generate system
16
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
set up speed-dialing
add or remove recipients from a group
You can add or remove an individual number to or from an existing group.
Follow these steps to add or remove recipients from groups:
1
2
3
4
Press Setup until 2:Speed Dial Setup appears. Press Enter.
Press until 2:Group Speed Dial appears, and then press Enter.
After 1=New 2=Edit appears, press 2.
Press
until the group that you want to edit appears, and then press
Enter.
The first individual speed-dial entry in that group appears.
5
6
For each entry in the group, press 1 to delete it or 2 to keep it.
Tip — If you are uncertain of what to do, the front panel display
will provide step-by-step instructions. Wait a few moments for the
instructions to appear.
When Add New? appears, choose one of the following:
–
If you want to add new individual entries to the group, press 1 and see
–
If you do not want to add any additional individual numbers, press 2 to
edit the group name, or press Enter to save it as is.
7
When Another Group? appears, press 1 to edit another group or 2 to exit
the menu.
delete speed-dial entries
Follow these steps to delete an individual or group speed-dial entry.
1
2
3
Press Setup until 2:Speed Dial Setup appears. Press Enter.
Press
Press
until 3:Delete Speed Dial appears, and then press Enter.
until the individual or group entry that you want to delete
appears. Or, use the keypad to manually enter the speed-dial number, and
then press Enter.
Tip — You can print a complete list of your assigned speed-dial
entries for your reference. For information, see generate system
send a fax using a one-touch speed-dial button
The first 10 speed-dial entries are automatically saved to the 5 one-touch
speed-dial buttons. Each one-touch button toggles between two speed-dial
entries. For example, press the first one-touch button to toggle between
speed-dial entries 1 and 6, press the second one-touch button to toggle between
speed dial entries 2 and 7, and so on, through the fifth one-touch button.
Follow these steps send a fax using a one-touch speed-dial button:
1
2
Load your original in the ADF.
Press the appropriate one-touch speed-dial button. The fax number
appears on the display.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
use the fax features
3
Press Start, Black or Start, Color.
If there is no original in the ADF, you will be prompted to load the original in
document feeder. Once loaded, the HP Fax will begin sending the fax.
send a fax using the speed-dial button
1
2
Load your original in the ADF.
Press the Speed Dial button until the desired fax number appears.
3
Press Start, Black or Start, Color.
If there is no original in the ADF, you will be prompted to load the original in
document feeder. Once loaded, the HP Fax will begin sending the fax.
schedule a fax
Use the Send Fax Later setting to send a fax at a scheduled time up to 24 hours
later. Choose from a single recipient or a group, and then scan the original to
memory. When you schedule a fax, you can only send it in black-and-white.
When the scheduled time arrives, the HP Fax automatically sends your fax as
soon as a connection is made.
schedule a fax to send later
Follow these steps to schedule a fax to send later:
1
Load your original in the ADF, or you can load your original at any time
prior to the scheduled time.
2
3
4
Press Fax until How to Fax appears.
Press
until Send Fax Later appears. Press Enter to select the setting.
Enter the Send Time using the numeric keypad.
Tip — Enter a zero (0) before a single-digit time; for example,
03:14.
5
6
Press 1 for AM or 2 for PM.
When Enter fax number appears, enter the fax number of the recipient or
select the group using the Speed Dial button.
7
8
Press Start, Black.
When Store Fax Now? appears, press 1 for Yes or 2 for No.
If you select 1, the document is scanned to memory and is sent at the
selected time. If you select 2, and you haven’t loaded your original, a
message appears reminding you to load the original before the send time.
The front panel will then display the scheduled time for your fax.
18
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
poll for faxes
cancel a scheduled fax
Follow these steps to cancel a scheduled fax stored in memory, or a fax that is
currently in progress:
1
2
Press Fax until How to Fax appears.
Press
until Send Fax Later appears. Press Enter to select the setting.
Note: After you press
to select it.
to select Send Fax Later, you must then press Enter
The front panel displays Scheduled Fax in Memory if the fax was stored in
memory. Or, Scheduled Fax is Pending displays if the document was not
stored in memory. After a moment, the scheduled time and fax number
appear.
3
When Cancel? 1 = Yes 2= No appears, press 1 to cancel the scheduled fax
or press 2 to retain the scheduled fax time and number.
If you select Yes, Scheduled Fax Cancelled will be displayed. If you select
No, Scheduled HH:MM will be displayed.
poll for faxes
This feature lets your HP Fax “ask” another fax unit for the fax it has waiting. The
other unit must be set for polling and have a fax ready to send.
Follow these steps to set up polling for faxes:
1
2
3
Press Fax until How to Fax appears.
Press
until Poll for Fax appears. Press Enter to select the setting.
Enter the fax number using the keypad, use one of the one-touch speed-dial
buttons, or press Speed Dial until the desired speed-dial entry appears. (For
4
Press Start, Black or Start, Color.
print reports
Use the Print Reports feature to automatically print confirmation and error reports
for each fax you send and receive. You can also manually print system reports
as you need them; these reports provide useful system information about your
HP Fax.
By default, your HP Fax is set to print a report only if there is a problem with
sending or receiving a fax. A confirmation message that indicates whether a fax
was successfully sent appears briefly on the front-panel display after each
transaction.
generate fax confirmation and error reports
This setting enables you to configure your HP Fax so that it automatically prints
confirmation and error reports.
Note: If you need printed confirmation each time your faxes are successfully
sent, follow these instructions before sending any faxes.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
use the fax features
Follow these steps to generate reports automatically:
Press Setup until 1:Print Report appears, and then press Enter.
1
2
3
Press
Press
until 6:Automatic Reports Setup appears, and then press Enter.
to scroll through the following report types:
–
Every Error prints whenever there is any kind of fax error. (This is the
default selection).
–
–
–
–
–
Send Error prints whenever there is a transmission error.
Receive Error prints whenever there is a receiving error.
Every Fax confirms every time a fax is sent or received.
Send Only prints every time a fax is sent.
Off does not print fax reports.
4
When the option you want appears, press Enter.
generate system reports
Follow these steps to manually print any of the system reports about your HP Fax,
such as the Speed Dial List and the self-test report:
1
2
3
Press Setup.
When 1:Print Reports appears, press Enter.
Press
to scroll through the following report types:
–
–
1:Last Transaction, which indicates the status of the last fax sent.
2:Fax Log, which lists approximately the last 40 faxes sent and
received.
–
3:Speed Dial List, which lists your individual and group numbers. A
smaller version of the Speed Dial list is also printed that can be cut and
placed on the front panel beside the one-touch speed-dial buttons.
4:Menu Settings, which lists in outline form the entire menu system and
indicates the current and default settings.
5:Self-Test Report, which prints a self-test report. For more information,
–
–
–
6:Automatic Reports Setup, which is the automatic reports setting
4
When the report you want appears, press Enter.
set new defaults
Save the fax settings you use most often by setting them as the default. This
includes changes to fax options such as Resolution and Lighter/Darker.
1
Press Fax to scroll through the available fax options. Make any desired
changes to the fax options.
2
3
4
Press Fax until Set New Defaults appears.
Press
until Yes appears.
Press Enter to set the settings as the default.
Your settings are saved. You can restore the fax settings back to the factory
20
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
control resolution and contrast
control resolution and contrast
Use the Resolution and the Lighter/Darker settings to change the resolution and
contrast of documents that you are sending.
change resolution
Resolution affects the transmission speed and quality of faxed documents. The
HP Fax only sends faxes at the highest resolution supported by the receiving fax.
You can change the resolution between pages only when receiving faxes. Follow
these steps to change the resolution:
1
Press Resolution.
Tip — You can also press Fax to access the Resolution setting.
2
Press
to scroll through the following resolution settings:
–
Fine: This is the default setting. It provides high-quality text suitable for
faxing most documents.
–
Very Fine: Use this setting when you are faxing documents with very
fine detail. Very Fine only works if the receiving fax machine also has
the Very Fine setting. If you choose this option, be aware that the
faxing process takes longer to complete.
–
–
Photo: This setting provides the best quality fax when sending
photographs. If you choose Photo, be aware that the faxing process
takes longer to complete. When faxing photographs, we recommend
that you choose Photo.
Standard: This setting provides the fastest possible transmission with the
lowest quality of fax.
Note: Very Fine mode is not used when sending documents that are
scanned into memory, such as when you are broadcasting to multiple
recipients or scheduling a fax for later. If you are sending documents using
one of these methods, Very Fine will be changed to Fine even if Very Fine
was selected.
3
When the resolution setting you want appears, press Enter.
change contrast
Change this setting if you want a black-and-white fax to be darker or lighter than
the original. Follow these steps to change contrast:
1
Press Fax until Lighter/Darker appears.
The range of Lighter/Darker values appears as a circle on a scale on the
front-panel display.
2
Press
to lighten the fax or
to darken it. The circle moves to the left or
right, depending on the button you press. Press Enter to select the setting.
Note: The Lighter/Darker settings reset to the default two minutes after the
fax job is complete. You can change the default setting, see set new defaults
21
Download from Www.Somanuals.com. All Manuals Search And Download.
use the fax features
set basic fax settings
Use the Basic Fax Setup option to set the following basic fax settings:
•
•
•
•
•
•
•
•
•
use shortcuts to access menu settings
You can use the keypad of the HP Fax as a shortcut to access many of the menu
settings. To use the shortcut method, simply press the number associated with the
desired setting. For example, if you wish to access the paper size setting, follow
these steps:
1
2
Press Setup.
Press 3, and then press 4.
This selects Basic Fax Setup, and then Paper Size.
3
4
Press
to scroll through the setting options.
When the option you want appears, press Enter.
set the date and time
Follow these steps to set the date and time:
1
2
Press Setup until 3:Basic Fax Setup appears, and then press Enter.
After 1:Date and Time appears, press Enter, and then enter the date and
time using the keypad.
Tip — Use only the last two digits for the year.
Tip — When you enter a single-digit date or time, enter a leading
zero before the single digit: for example, 03:45, or 08-03-02.
After you are finished, the date and time appear on the display.
set the fax header
Follow these steps to enter your name and fax number:
Note: This information is required by law in many countries. The fax header
prints your name and fax number on the top of every fax you send.
1
2
Press Setup until 3:Basic Fax Setup appears, and then press Enter.
After 1:Date and Time appears, press
then press Enter.
until 2:Fax Header appears, and
22
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
set basic fax settings
3
After Your Name appears, enter your name. For information on entering
4
5
Using the keypad, enter your fax number.
Press Enter.
enter text
The following list provides tips for entering text using the keypad on the front
panel:
•
Press the keypad numbers that correspond to the letters of a name.
ABC
These letters correspond to this number, and so on.
2
•
Press a button multiple times to see a letter first in uppercase and then in
lowercase.
To get this character:
Press 5 this many times
J
j
K
3
k
L
l
5
7
JKL
5
1
2
4
5
6
•
After the correct letter appears, press
corresponds to the next letter in the name. Again, press multiple times until
the correct letter appears.
, and then press the number that
•
•
To insert a space, press Space (#).
To enter a symbol, such as @, press Symbols (*) to scroll through the list of
available symbols. The following symbols are available:
@ . _ - & / : ; , ? * ( ) ’ = ! % ”
•
•
If you make a mistake, press
entry.
After you are finished entering text, press Enter to store your entries.
to clear it, and then make the correct
set the rings to answer setting
Use this setting to change the number of rings before your HP Fax answers
incoming calls. Your HP Fax is factory-set to begin receiving faxes after 5 rings.
Follow these steps to change the Rings to Answer setting:
1
2
Press Setup until 3:Basic Fax Setup appears, and then press Enter.
After 1:Date and Time appears, press
and then press Enter.
until 3:Rings to Answer appears,
3
4
After Answer on Ring appears, press
to scroll to the desired number of
rings.
After the number you want appears, press Enter.
Tip — To use this feature, Auto Answer must be enabled. The light
next to Auto Answer is on when the feature is enabled. Press the
Auto Answer button to turn it on or off.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
use the fax features
set the paper size
The paper size selected should match what is loaded in your input tray. To set
the paper size, follow these steps:
Press Setup until 3:Basic Fax Setup appears, and then press Enter.
1
2
After 1:Date and Time appears, press
then press Enter.
until 4:Paper Size appears, and
3
4
After Paper Size appears, press
to scroll to the desired paper size.
After the paper size you want appears, press Enter.
Note: The default paper size is dependent upon your country/region. To
check the default paper size, press Copy until Paper Size appears. The
paper size that displays is the default.
set tone or pulse dialing
You can set the dial mode for tone or pulse dialing. To set the dial mode, follow
these steps:
1
2
Press Setup until 3:Basic Fax Setup appears, and then press Enter.
After 1:Date and Time appears, press
until 5:Tone or Pulse Dialing
appears, and then press Enter.
3
After Dial Mode appears, press
to select Tone or Pulse.
adjust the volume
Use the Ring and Beep Volume setting to adjust the phone ring volume and
speaker volume (dialing and fax tones). The volume is factory-set to Soft.
Note: The volume setting applies to both the ring and speaker volume; you
cannot change the volume for the ring and speaker separately.
Follow these steps to adjust the volume:
1
2
3
4
Press Setup until 3:Basic Fax Setup appears. Press Enter.
Press
Press
until 6:Ring and Beep Volume appears, and then press Enter.
to display the volume options: Soft, Loud, or Off.
When the setting you want appears, press Enter.
forward faxes to another number
Use the Fax Forwarding setting to forward your faxes to another fax number for
a set period of time. You can only forward black-and-white faxes.
Note: If you enable the fax forwarding feature, the HP Fax will not print
received faxes.
Follow these steps to forward faxes:
1
2
3
Press Setup until 3:Basic Fax Setup appears. Press Enter.
Press until 7:Fax Forwarding Black Only appears, and then press Enter.
When Enter fax number appears, enter the fax number using the keypad,
use one of the one-touch speed-dial buttons, or press Speed Dial until the
desired speed-dial entry appears. (For more information on speed-dialing,
24
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
set advanced fax settings
4
Enter the Start Date using the numeric keypad.
Tip — When you enter a single-digit date, type a leading zero
before the single digit: for example, 08-03-02. Use only the last
two digits for the year.
5
6
7
Enter the Start Time, and then press 1 for AM or 2 for PM.
Enter the Stop Date.
Enter the Stop Time, and then press 1 for AM or 2 for PM.
Faxes will be forwarded appears on the display when you are finished
making the settings.
Forwarding Faxes remains on the display until the forwarding time has
passed or you cancel the fax forwarding.
edit or cancel fax forwarding
You may find that you need to change the number you are forwarding your faxes
to or the start and stop times of the forwarding. You may wish to cancel your fax
forwarding setup altogether. Follow the steps below to edit or turn off the fax
forwarding.
to edit fax forwarding
1
2
3
Press Setup until 3:Basic Fax Setup appears. Press Enter.
Press until 7:Fax Forwarding Black Only appears, and then press Enter.
Forwarding is ON 1=Edit 2=Cancel appears on the display after a
moment. Press 1 to edit the number you wish to fax to or to change the start
and stop times. Follow the prompts on the display. Use the numeric keypad
to enter numbers. Press Enter to accept each entry.
to cancel fax forwarding
1
2
3
4
Press Setup until 3:Basic Fax Setup appears. Press Enter.
Press until 7:Fax Forwarding Black Only appears, and then press Enter.
Forwarding is ON 1=Edit 2=Cancel appear on the display after a moment.
Press 2 to cancel the fax forwarding.
Fax forwarding cancelled appears on the display.
set advanced fax settings
Use the Advanced Fax Settings option to set the following advanced fax settings:
•
•
•
•
•
•
•
•
25
Download from Www.Somanuals.com. All Manuals Search And Download.
use the fax features
change the answer ring pattern (distinctive ringing)
Many phone companies offer a distinctive ringing feature that allows you to have
several phone numbers on one phone line. When you subscribe to this service,
each number will have a different ring pattern, for example, single, double, and
triple rings. If you do not have this service, use the default ring pattern, which is
All Rings.
If you connect your HP Fax to a line with distinctive ringing, have your telephone
company assign one ring pattern to voice calls and another to fax calls. We
recommend that you request double or triple rings for a fax number.
Follow these steps to change the answer ring pattern:
1
Verify that your HP Fax is set to answer automatically. For more
2
3
4
Press Setup until 4:Advanced Fax Setup appears. Press Enter.
Press
Press
until 2:Answer Ring Pattern appears, and then press Enter.
to scroll through these options: All Rings, Single Rings, Double
Rings, Triple Rings, and Double & Triple.
5
When the ring pattern that the phone company established for this number
appears, press Enter.
Tip — We recommend that have the phone company assign
Double Rings or Triple Rings for your fax number.
Note: If you have an answering machine or a modem on this phone line,
for more information.
redial a busy number automatically
By default, your HP Fax is configured to redial a busy number automatically.
Follow these steps to change the busy redial setting:
1
2
3
4
Press Setup until 4:Advanced Fax Setup appears. Press Enter.
Press
Press
until 3:Busy Redial appears, and then press Enter.
to display Redial or No Redial options.
When the desired setting appears, press Enter to select it.
redial an unanswered number automatically
You can set your HP Fax to redial an unanswered number automatically. The
default setting for No Answer Redial is No Redial.
Follow these steps to change the no answer redial setting:
1
2
3
4
Press Setup until 4:Advanced Fax Setup appears. Press Enter.
Press
Press
until 4:No Answer Redial appears, and then press Enter.
to display Redial or No Redial options.
When the desired setting appears, press Enter to select it.
26
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
set advanced fax settings
set automatic reduction
This setting determines what your HP Fax does if it receives a fax that is too large
for the default paper size. With this setting on, the image is reduced so that it fits
on one page. With this feature off, information that doesn’t fit on the first page
is printed on a second page.
Follow these steps to set automatic reduction:
1
2
3
4
Press Setup until 4:Advanced Fax Setup appears. Press Enter.
Press
Press
until 5:Automatic Reduction appears, and then press Enter.
to toggle between Off and On.
When the option that you want appears, press Enter.
set backup fax reception
Backup Fax Reception enables you to reprint a fax stored in memory. For
example, if your print cartridge runs out of ink while printing a fax, the Backup
Fax Reception stores the fax. Then, once you have replaced the ink cartridge,
you can print out the fax. By default, this feature is enabled. For information on
Note: If you receive sensitive documents, or your HP Fax is located in a
public area, you may want to turn Backup Fax Reception off so that your
documents are not accessible to unauthorized users.
Your HP Fax can store a limited number of fax pages in its memory, with the
number of pages depending on the model you purchased. For fax specifications,
overwrites the oldest, printed faxes.
Note: All unprinted faxes will remain in memory until they are printed or
deleted. When the memory becomes full of unprinted faxes, it will not
receive any more faxes until the unprinted faxes are printed.
Follow these to set backup fax reception:
1
2
3
4
Press Setup until 4:Advanced Fax Setup appears. Press Enter.
Press
Press
until 6:Backup Fax Reception appears, and then press Enter.
to toggle between Yes and No.
When the option that you want appears, press Enter.
Tip — To delete all faxes in memory, including the unprinted faxes,
turn off your HP Fax.
reprint faxes in memory
If Backup Fax Reception is enabled, you can reprint faxes in memory. For
Note: This feature prints all faxes in memory; press Cancel to stop printing
the current fax you do not need. You will need to press Cancel for each
stored fax to stop it from printing.
Follow these steps to reprint all the faxes in memory:
27
Download from Www.Somanuals.com. All Manuals Search And Download.
use the fax features
1
Press Setup until 5:Maintenance appears. Press Enter.
Press until 4:Reprint Faxes in Memory appears, and then press Enter.
2
use error correction mode
Error Correction Mode (ECM) eliminates data lost due to poor phone lines by
detecting errors that occur during transmission and automatically requesting
retransmission of the erroneous portion. Phone charges are unaffected, or may
even be reduced, on good phone lines. On poor phone lines, ECM increases
sending time and phone charges, but sends the data much more reliably. Turn
ECM off (the default setting is on) only if it increases phone charges substantially,
and you can accept poorer quality in exchange for reduced charges.
Follow these steps to change the error correction mode:
1
2
3
4
Press Setup until 4:Advanced Fax Setup appears. Press Enter.
Press
Press
until 7:Error Correction Mode appears, and then press Enter.
to switch between Off and On.
When the option that you want appears, press Enter.
detect faxes received from older machines (silent detect)
This feature enables you to receive faxes from older fax machines that do not emit
a fax signal. These silent models represent less than 5% of fax machines in use.
Leave this setting off unless both of the following are true:
•
•
1
2
3
4
You are having trouble receiving a fax from an older machine.
Your answering machine is connected directly to your HP Fax.
Press Setup until 4:Advanced Fax Setup appears. Press Enter.
Press
Press
until 8:Silent Detect appears, and then press Enter.
to toggle between Off and On.
When the state that you want appears, press Enter.
Caution! The On setting causes the HP Fax to emit fax signals
when a periodic silence is detected. This may increase the
likelihood of fax interruptions during voice conversations.
connect and use other office equipment with your hp fax
This section describes how to set up and use your HP Fax on the same phone line
with other office equipment, such as your phone, voice mail, or answering
machine. Use these instructions if your setup situation is not covered on the
HP Fax Setup Poster. The Setup Poster covers situations in which you have a
separate phone line dedicated for fax use.
This section covers the following topics:
•
•
•
•
28
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
connect and use other office equipment with your hp fax
connect and use a phone with your hp fax
You can set up your HP Fax to answer fax calls either automatically or manually
when connected to a phone. The recommended method is to set your HP Fax to
receive fax calls automatically. If you rarely receive faxes, however, you may
want to set up your HP Fax to receive fax calls manually.
Note: When receiving faxes manually, you must be available to respond in
person to the incoming fax call, or your HP Fax cannot receive faxes.
to connect your hp fax to a phone
1
Remove the white plastic stopper from connector 2 on the back of the
HP Fax.
connector 2 on the HP Fax
2
Connect the phone cord from the phone to connector 2.
Caution! Do not use the phone cord that came with the HP Fax for
this purpose. That phone cord must connect connector 1 on the
HP Fax to the wall jack for your phone system. See the Setup Poster
for details.
how answer fax calls automatically
`
Verify that Auto Answer is enabled. (The light next to Auto Answer is on
when the feature is enabled. Press the Auto Answer button to turn the
feature on or off.) When a fax call is received, the HP Fax will pick up and
connect with the sending fax machine. Your fax will then be printed.
Note: If you pick up the phone before the HP Fax answers and hear fax
tones, stay on the line until your HP Fax connects, and then hang up. Or,
press 1 2 3 when you hear the fax tones to send the fax call immediately to
the HP Fax. Once the HP Fax receives the fax call, the telephone will go
silent. At this point, hang up your phone.
Note: After the HP Fax answers the fax call, any telephone connected
directly to it will be temporarily disabled. This prevents any interruptions
occurring during the fax.
how to answer fax calls manually
When receiving faxes manually, you must be available to respond in person to
page 14 for more information. You can use either the telephone or the front
panel to answer fax calls manually. Follow these steps:
1
Press the Auto Answer button to turn off the Auto Answer feature (the Auto
Answer light will go off).
2
When your HP Fax rings, pick up the handset of a telephone that is on the
same telephone line as your HP Fax.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
use the fax features
3
When you answer a phone and hear fax tones, press 1 2 3 to begin
receiving the fax. Or, once Phone off-hook is displayed on the front panel,
you can press Start, Black or Start, Color.
Note: Once the HP Fax receives the fax call, the telephone will go silent. At
this point, hang up your phone.
answer fax calls when you use voice mail on the same phone line
Some voice mail systems have the capability to forward incoming fax calls to
your HP Fax. If your voice mail system has this capability, your HP Fax can
answer fax calls automatically. Refer to the documentation provided by your
voice mail system to find out if it has this feature.
Or, if you subscribe to a distinctive-ring service through your phone company,
your HP Fax will be able to distinguish between voice and fax calls, and answer
fax calls automatically. For information, see change the answer ring pattern
If you don't have the voice mail forwarding feature or distinctive ring, you must
be available to respond in person to incoming fax calls, or your HP Fax cannot
receive faxes. If you do not respond to a fax call, it will be recorded as a voice
mail message.
Use the instructions below to set up your HP Fax to manually receive faxes.
1
Press the Auto Answer button to turn off the Auto Answer feature (the Auto
Answer light will go off).
2
When you answer a phone and hear fax tones, press 1 2 3 to begin
receiving the fax. Or, once Phone off-hook is displayed on the front panel,
you can press Start, Black or Start, Color.
Note: Once the HP Fax receives the fax call, the telephone will go silent. At
this point, hang up your phone.
answer fax calls when you use an answering machine on the same line
If you use an answering machine on the same phone line as your HP Fax, we
recommend that you connect it directly to the HP Fax so that you can receive
faxes automatically. If you choose not to directly-connect your answering
machine, you must be available in person to receive incoming faxes manually.
Refer to the following sections for the instructions that apply to your answering
machine setup.
to answer calls with an answering machine connected directly to your hp fax
1
Verify that Auto Answer is enabled. (The light next to Auto Answer is on
when the feature is enabled. Press the Auto Answer button to turn the
feature on or off.)
2
Set the Rings to Answer on the HP Fax to a setting greater than the number
of rings selected for your answering machine. For more information, see set
machine will pick up first, and the HP Fax can “listen” for fax tones. If the
HP Fax detects fax tones, it will take over the call; if there are no fax tones,
the answering machine will record the voice message. The HP Fax is
factory-set to answer after 5 rings.
30
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
connect and use other office equipment with your hp fax
Note: If you answer a phone and hear fax tones, press 1 2 3 to accept the
fax. Once the HP Fax receives the fax call, the telephone will go silent. At
this point, hang up your phone.
to answer fax calls when your answering machine is not directly connected to your hp fax
1
Press the Auto Answer button to turn off the Auto Answer feature (the Auto
Answer light will go off).
2
When you answer a phone and hear fax tones, press 1 2 3 on your phone
to begin receiving the fax. Or, once Phone off-hook is displayed on the
front panel, you can press Start, Black or Start, Color.
Note: Once the HP Fax receives the fax call, the telephone will go silent. At
this point, hang up your phone.
Note: You must be available to respond in person to the incoming fax call,
or your HP Fax cannot receive faxes.
use off-hook dialing
You can dial a telephone number on the HP Fax as you would a regular
telephone – that is, listen to the ringing, the answering, and the fax tones of the
recipient's fax machine. You might use off-hook dialing when you want to charge
the fax call to your calling card. Or, use it to verify the number you are calling,
for example, to make sure you’re calling is a fax number. Use off-hook dialing
so that you can hear the tones of the recipient’s fax machine before sending the
fax.
Follow these steps to use off-hook dialing:
1
Load your original in the ADF.
2
3
Press Start, Black or Start, Color.
After Off hook appears, use the front-panel keypad to dial the phone
number.
Enter all the numbers you would enter if you were dialing the number from
a phone using your credit or calling card.
4
Follow any voice prompts that may occur.
Your fax will be sent when the receiving fax answers.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
use the fax features
fax options
The following diagram shows the options that are available when you press Fax.
How to Fax
Enter fax
number
Lighter/
Darker
Set New
Defaults
Resolution
Send Fax Now
Scan and Send
Send Fax Later
Poll for Fax
No
Yes
< ooooOoooo >
< oooooOooo >
< ooooooOoo >
< oooooooOo >
< ooooooooO >
< oooOooooo >
< ooOoooooo >
< oOooooooo >
< Ooooooooo >
Fine
Very Fine
Photo
Standard
32
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
use the copy features
4
The copy features let you do the following:
•
•
•
•
Produce high-quality color and black-and-white copies using a variety of
paper types and sizes, including iron-on transfers.
Reduce or enlarge the size of the copies you make from 25% to 200% of
the copy’s original size (varies by model).
Make the copy lighter or darker, adjust the color intensity, select the
number of copies, and specify the quality of the copies you make.
Use special copying features to make many sizes of photos, make
high-quality copies of photos using special photo paper, and create
transparencies.
make copies
Use the front panel of your HP Fax to make copies and change the copy settings.
This section provides instruction on making a basic copy. For information on
make a basic copy
Follow these steps to getting started making copies:
1
Load the input tray with the appropriate paper.
2
Load your original in the automatic document feeder (ADF).
3
4
Press Copy.
Press Start, Black or Start, Color.
change copy settings
You can temporarily change copy settings before making a copy, or set new
defaults for all future copy jobs. All copy settings are reset two minutes after the
HP Fax completes the copy, unless you save the settings as the default settings as
You can make changes to the following copy options:
•
•
•
•
•
•
33
Download from Www.Somanuals.com. All Manuals Search And Download.
use the copy features
Note: Additionally, you can set the paper type and paper size settings for
your copy jobs. For information on setting the paper type, see set the paper
set the number of copies
You can set the number of copies from 1 to 99 using the front panel.
1
Press Copy. After Number of Copies appears, use the keypad or press
or to enter the number of copies, and then press Enter.
When setting a large number of copies, hold down the right arrow button
to increase the number of copies in increments of 5.
2
Press Start, Black or Start, Color.
increase copy speed or quality
The HP Fax provides three options that affect copy speed and quality; Best,
Normal, and Fast.
1
2
3
Load your original in the ADF.
Press Copy until Copy Quality appears.
Press
until the desired quality setting appears, and then press Enter to
select it.
–
Best produces the highest quality for all paper and eliminates the
banding (striping) effect that sometimes occurs in solid areas. Best
copies more slowly than the other quality settings.
–
–
Normal delivers high-quality output and is the recommended setting for
most of your copying. Normal copies faster than Best.
Fast copies faster than the Normal setting. The text is of comparable
quality to the Normal setting, but the graphics may be of lower quality.
Using Fast also cuts down on the frequency of replacing your print
cartridges, because it uses less ink.
4
Press Start, Black or Start, Color.
make copies lighter or darker
Use Lighter/Darker to adjust the lightness and darkness of the copies you make.
1
Press Copy until Lighter/Darker appears.
The range of Lighter/Darker values appears as a circle on a scale on the
front-panel display.
2
3
Press
to lighten the copy or
to darken it. The circle moves to the left
or right, depending on the button you press. Press Enter to select the
setting.
Press Start, Black or Start, Color.
34
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
change copy settings
reduce or enlarge a copy
Use Reduce/Enlarge to reduce or enlarge a copy of an original. The HP Fax
provides four options; Actual 100%, Full Page 91%, Legal -> Ltr 74%, and
Custom.
1
2
Press Copy until Reduce/Enlarge appears.
Press until the appropriate reduce/enlarge option appears, and then
press Enter to select it.
–
–
Actual 100% copies your original at 100%.
Full Page 91% copies your original at 91%. This feature may prevent
unwanted cropping of text or images around the margins.
Legal -> Ltr 74% copies a legal-size original to letter-size paper.
Custom allows you to specify the amount you want to reduce or enlarge
your copy, from 25% up to 200% (varies by model).
–
–
3
4
If you select Custom, Set custom size appears. Use the arrow keys or type a
percentage on the number keypad. Press Enter when the desired
percentage is displayed.
Press Start, Black or Start, Color.
enhance text sharpness and photo colors
Use Text enhancements to sharpen edges of black text. Use Photo enhancements
for photographs or pictures to enhance light colors that may otherwise appear
white.
Text enhancement is the default option. If any of the following problems occurs,
turn off Text enhancement by selecting Photo or None:
•
•
•
•
1
2
Stray dots of color surround some text on your copies.
Large, black typefaces look splotchy (not smooth).
Thin, colored objects or lines contain black sections.
Horizontal grainy or white bands appear in light- to medium-gray areas.
Press Copy until Enhancement appears.
Press
until the desired enhancement (Text, Photo, or None) appears.
Press Enter to select the setting.
3
Press Start, Black or Start, Color.
set new defaults
Save the copy settings you use most often by setting them as the default. This
includes changes to copy options such as Paper Type and Paper Size, as well as
other copy settings, such as Number of Copies and Copy Quality.
1
Press Copy to scroll through the available copy options. Make any desired
changes to the copy options.
2
3
4
Press Copy until Set New Defaults appears.
Press
until Yes appears.
Press Enter to set the options as the default.
Note: You can restore the copy settings back to the factory defaults at any
35
Download from Www.Somanuals.com. All Manuals Search And Download.
use the copy features
perform special copy jobs
In addition to supporting standard copying, your HP Fax can also do the
following:
•
•
copy a photo
When copying a photo, select options for the correct paper type and photo
enhancement.
1
2
Load the photo in the ADF.
Load the photo paper in the input tray.
Note: You can only use Letter- or A4-size photo paper.
Press Copy until Paper Type appears.
3
4
Press
until the desired photo paper option appears, and then press
Enter to select it.
5
6
7
Press Copy until Enhancements appears.
Press
until Photo appears, and then press Enter to select it.
Press Start, Black or Start, Color.
prepare a color t-shirt transfer
Use the Iron-On feature to reverse text and images so that they appear
backwards. After you iron a transfer onto a T-shirt, the picture appears correctly
on the shirt.
Original
Iron-On
Tip — We recommend that you practice applying a T-shirt transfer
to an old garment first.
1
2
3
4
Load your original in the ADF.
Load the T-shirt transfer paper in the input tray.
Press Copy until Paper Type appears.
Press
until Iron-On appears, and then press Enter to select it.
Selecting this option automatically copies a mirror-image of your original.
5
Press Start, Black or Start, Color.
36
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
copy options
copy options
The following diagram shows the options that are available when you press
Copy.
Copy Quality
Reduce/
Enlarge
Number of
Copies
Lighter/
Darker
Normal
Fast
Best
1 to 99
Actual size 100%
Full page 91%
Legal -> Ltr 74%
Custom
< ooooOoooo >
< oooooOooo >
< ooooooOoo >
< oooooooOo >
< ooooooooO >
< oooOooooo >
< ooOoooooo >
< oOooooooo >
< Ooooooooo >
Set New
Defaults
Paper Size*
Enhancements
Paper Type
No
Yes
Letter
A4
Legal
Text
Photo
None
Plain Paper
Premium Photo
Photo-Qual Glss
Photo-Qual Matt
Premium Inkjet
Brochure Glossy
Brochure Matte
Iron-On
Transparency
*The sizes vary by country/region.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
use the copy features
38
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
maintain your hp fax
5
This section provides instructions for keeping your HP Fax in top working
condition. Perform these maintenance procedures as necessary.
clean the exterior
Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off the case.
The interior of the HP Fax does not require cleaning. Keep fluids away from the
interior of the HP Fax as well as the front panel.
work with print cartridges
To ensure the best print quality from your HP Fax, you will need to perform some
simple maintenance procedures, and when prompted by a front-panel message,
replace the print cartridges.
print a self-test report
If you are experiencing problems with printing, before cleaning or replacing the
print cartridges, print a self-test report. This report provides useful information
about your print cartridges, including status information and ink levels.
1
2
Press Setup until 1:Print Report appears, and then press Enter.
Press until 5:Self-Test Report appears, and then press Enter.
A self-test report is printed for your HP Fax, which may indicate the source
of any problems you may be having.
handle print cartridges
Before you replace or clean a
print cartridge, review this
information on how to handle
the print cartridge.
Caution! Do not touch
the copper contacts or
the ink nozzles.
Ink nozzles
under tape
Plastic tape
(must be removed)
Copper contacts
39
Download from Www.Somanuals.com. All Manuals Search And Download.
maintain your hp fax
replace the print cartridges
Front-panel display messages appear to let you know when it is time to replace
your print cartridges.
print cartridges.
1
2
3
Turn on the HP Fax, and then open the print-cartridge access door.
The print carriage moves into view.
After the carriage stops moving, lift the
latch to release the print cartridge, and
then pull it toward you out of its slot.
latches
4
5
Remove the new print cartridge from its
packaging and, being careful to touch
only the black plastic, gently remove the
plastic tape.
Caution! Do not touch the copper
contacts or ink nozzles.
Push the new print cartridge into the
appropriate slot.
The tri-color (#78) print cartridge goes on
the left and the black (#15) cartridge
goes on the right.
6
7
Close the latch.
Close the print-cartridge access door.
40
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
restore factory defaults
align cartridges
The HP Fax prompts you to align cartridges every time you install or replace a
print cartridge. Aligning the cartridges ensures high-quality output.
to align the print cartridges when prompted
1
Press Enter on the front panel.
The HP Fax prints a text page that contains instructions and an align
cartridges page that contains test patterns.
2
Following the instructions on the text page, place the align cartridges (test
pattern) page face down in the ADF. Adjust the paper-width guides to
ensure that the page feeds in straight. Press Enter.
The HP Fax aligns the cartridges and displays the message Alignment
Complete. Discard or recycle the text page and align cartridges page.
to align the cartridges at any other time
1
2
Press Setup until 5:Maintenance appears, and then press Enter.
Press until 2:Align Print Cartridges appears, and then press Enter.
The HP Fax prints a text page that contains instructions and an align
cartridges page that contains test patterns.
3
Following the instructions on the text page, place the align cartridges (test
pattern) page face down in the ADF. Adjust the paper-width guides to
ensure that the page feeds in straight. Press Enter.
The HP Fax aligns the cartridges and displays the message Alignment
Complete. Discard or recycle the text page and align cartridges page.
clean the print cartridges
Use this feature when the self-test report shows streaking or white lines through
any of the colored bars. Do not clean print cartridges unnecessarily. This wastes
ink and shortens the life of the ink nozzles.
1
2
Press Setup until 5:Maintenance appears, and then press Enter.
Press until 1:Clean Print Cartridges appears, and then press Enter.
If copy or print quality still seem poor after you clean the print cartridges,
replace the print cartridge that is affected.
restore factory defaults
Use this setting to restore all of the front panel options to their original factory
settings.
1
2
Press Setup until 5:Maintenance appears, and then press Enter.
Press until 3:Restore Factory Defaults appears, and then press Enter.
The factory default settings are restored.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
maintain your hp fax
setup menu options
The following diagram shows the options that are available when you press
Setup.
Setup
2:Speed Dial
Setup
1. Print Report
1:Individual Speed Dial
2:Group Speed Dial
3:Delete Speed Dial
4:Print Speed Dial List
1:Last Transaction
2:Fax Log
3:Speed Dial List
4:Menu Settings
5:Self-Test Report
6:Automatic Reports Setup
4:Advanced
Fax Setup
3:Basic Fax
Setup
1:Automatic Reports Setup
2:Answer Ring Pattern
3:Busy Redial
4:No Answer Redial
5:Automatic Reduction
6:Backup Fax Reception
7:Error Correction Mode
8:Silent Detect
1:Date and Time
2:Fax Header
3:Rings to Answer
4:Paper Size
5:Tone or Pulse Dialing
6:Ring and Beep Volume
7:Fax Forwarding Black Only
To open a menu:
• press Setup repeatedly until you see the
5:Maintenance
menu, then press Enter
• press Setup and then press Options
repeatedly until you see the menu, then
press Enter
1:Clean Print Cartridges
2:Align Print Cartridges
3:Restore Factory Defaults
4:Reprint Faxes in Memory
5:Set Language & Country/Region
• type the menu number
To select a setting:
• press
and
to cycle through the
settings, then press Enter to select the
displayed setting
• type the setting number
42
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
additional setup information
6
This section describes how to set the language, country/region, and how to set
up your HP Fax with other office equipment. The standard installation instructions
are provided in your Setup Poster, we recommend keeping it for later use.
set the language and country/region
Usually, you set the language and country/region the first time you turn the
HP Fax on. If you would like to change the country/region or language, use the
following procedure.
Tip — If you are unable to read the front-panel display language,
but need to reset it, press Setup, 5, 5. Follow the onscreen
instructions.
1
2
Press Setup until 5:Maintenance appears, and then press Enter.
Press
until 5:Set Language & Country/Region appears, and then press
Enter.
3
Watch the display until the desired language appears. Enter the language
code on the keypad. Press 1 for yes or 2 for no when the display asks you
to confirm your selection.
After the language is selected, you are prompted with all the countries/
regions for that selected language.
4
Watch the display until the desired country/region appears. Enter the
country/region code on the keypad. Press 1 for yes or 2 for no when the
display asks you to confirm your selection.
Confirm the country/region and language by printing a self-test report.
1
2
Press Setup until 1:Print Report appears, and then press Enter.
Press until 5:Self-Test Report appears, and then press Enter.
connect your hp fax to a phone, modem, or answering
machine
This section explains how to connect your HP Fax to various office devices:
•
•
•
phone: connect a phone to the HP Fax so it can use the same phone
connection as the fax line
modem: connect a modem to your HP Fax so it can use the same phone
connection
answering machine: set your HP Fax to direct voice calls to the answering
machine and fax calls to the HP Fax
43
Download from Www.Somanuals.com. All Manuals Search And Download.
additional setup information
to connect your hp fax to a phone, modem, or answering machine
1
Remove the white plastic stopper from connector 2 on the back of the
HP Fax.
connector 2 on the HP Fax
2
3
If you want to connect more than one device to connector 2 on the HP Fax,
purchase a Y-splitter and plug it into connector 2.
Connect the phone cord from the phone, modem, or answering machine to
connector 2 (or Y-splitter).
Caution! Do not use the phone cord that came with the HP Fax for
this purpose. That phone cord must connect connector 1 on the
HP Fax to the wall jack for your phone system. See the Setup Poster
for details.
connector 1 on the HP Fax
Note: If you are connecting a modem, turn off its fax-receive feature.
44
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting help
7
This chapter provides tips for solving problems and for improving the quality of
your fax and copy jobs.
paper jams
problem
solution
The paper has
Open the top, take the edge of the paper, and gently pull the paper out of
jammed where it the HP Fax.
enters the
HP Fax.
The paper has
crumpled and
jammed in the
back of the
HP Fax.
Remove the back door by pushing the tabs inward. Gently pull the paper out
of the rollers. Replace the back door.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting help
problem
solution
The paper has
Grasp the leading edge of the paper and pull the paper out through the
jammed where it output tray.
exits the HP Fax.
Note: If you turned the HP Fax off before clearing the paper jam, turn it
back on, and then restart your output job.
tips to avoid paper jams
•
Make sure the input tray is not overfilled. The input tray capacity varies
depending on the type of paper you are using.
•
•
•
•
Check that the input tray is in place.
Do not add paper to the input tray while the HP Fax is printing.
Do not let paper stack up in the output tray. The paper type and the
amount of ink used affect the output tray’s capacity.
print cartridge problems
problem
resolution
The self-test report Clean the print cartridges.
shows streaking
1
2
Press Setup until 5:Maintenance appears, and then press Enter.
or white lines
through one or
more of the
Press
until 1:Clean Print Cartridges appears, and then press Enter.
If copy or print quality still seem poor after you clean the print
cartridges, replace the print cartridge that is affected. For information,
colored bars.
46
hp fax 1230
Download from Www.Somanuals.com. All Manuals Search And Download.
print cartridge problems
problem
resolution
The status
message
The contacts may need to be cleaned. Make sure you have the following
materials available:
continues to ask
me to replace the
cartridge after I
have already
replaced it.
• Cotton swabs or any soft material that will not come apart or leave fibers
(for example, use a scrap piece of clean cotton cloth).
• Distilled, filtered, or bottled water (Tap water may contain contaminants
that can damage the print cartridges).
Caution! Be careful not to get ink on your hands or clothing.
1
2
3
4
Turn the HP Fax on and open the print-cartridge access door. The print
cartridges will move to the access area.
After the print cartridges have stopped moving, unplug the power cord
from the back of the HP Fax.
Lift the latch to release the black print cartridge, and then pull it toward
you out of its slot.
Clean the black print cartridge:
–
Dip a clean cotton swab into
distilled water and squeeze any
excess water from the swab.
Hold the black print cartridge by
sides or top.
Clean the contacts as shown. Do
not remove the gold contacts.
Place the black print cartridge
back into the holder. The black
(#15) cartridge goes on the right.
–
–
–
5
6
Clean the color print cartridge:
Repeat step 3 and 4 to clean the
color print cartridge. Use a clean,
moistened cotton swab to avoid any contamination. Place the tri-color
(#78) print cartridge back into the holder on the left.
Close the print-cartridge access door.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting help
output problems
problem
solution
A blank page
came out while
copying or faxing.
Check to see if the print cartridges are low or out of ink. For information,
–
–
–
If black text is printing, and a blank page comes out of your
HP Fax, your black cartridge is empty. For information on
If a color document is printing, and the color does not print
correctly, one or more of the colors in the color cartridge are low.
For information on replacing print cartridges, see replace the print
If the self-test report shows gaps or streaks, clean the print
Colors are
Print a self-test report to make sure all six colors are available (CYAN,
than I expected.
–
When colors are completely wrong (for example, when green
prints as blue or yellow or gray prints as purple), the color
cartridge might have run out of one or more colors of ink.
If a color is missing, try cleaning the print cartridge contacts. If the
problem persists, replace the color print cartridge.
–
For information on cleaning the print cartridge, see clean the print
The printout is
slanted or skewed.
Check the following:
• Is the paper loaded correctly? Make sure the paper is feeding properly
from the input tray. Also check to make sure that the paper is sitting
properly in the input tray. Slide the paper-width and paper-length guides
against the sides of the paper to ensure that it feeds straight through.
Make sure the paper can move easily under the guides. For more
• Is the paper type suitable for the HP Fax? For information on
• Is there more than one paper type loaded in the input tray? Load only
one type of paper at a time.
• Was the fax sent correctly? Check with the sender; the original may not
have been loaded correctly into the sending fax machine.
48
hp fax 1230
Download from Www.Somanuals.com. All Manuals Search And Download.
quality problems
problem
solution
The printout is
blank.
Check the following:
• Did you place the original print-side down? Make sure that you placed
your original print-side down in the automatic document feeder (ADF).
• Print a self-test report to determine the problem. For information, see
–
If the report has missing colors, clean the print cartridges. For
If you are printing black text and a blank page comes out of the
HP Fax, your black cartridge is empty. For information on
–
–
If you are printing a color document and the color does not print
correctly, one or more of the colors in the color cartridge are low.
For information on replacing print cartridges, see replace the print
• Do you need to adjust the copy settings? If you are making a copy,
check the lighter/darker feature. For information on adjusting the copy
quality problems
problem
solution
Colors are
bleeding into
each other.
Check the setting for the type of document you are copying. Color documents
may use excess ink.
–
Try using the Normal setting or use HP Premium Papers. For
Check to see that the paper type is suitable for this HP Fax. For
–
Ink is not filling
the text or
Check the following:
• Is the paper type set correctly? When copying on transparencies or other
special paper types, select the corresponding paper-type setting. For
graphics
completely when
printing.
• Print a self-test report to check if the print cartridges need to be cleaned
–
If ink is not filling the patterns completely, clean the print cartridges.
If cleaning does not help, replace the print cartridges. For
information on replacing print cartridges, see replace the print
–
49
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting help
problem
solution
• Check to see that you are using the highest possible print quality. Use a
high print quality (Best) for your project. For information, see increase
There are
horizontal streaks
on the copy or
fax.
• Print a self-test report to check the print cartridges. For information, see
–
If ink is not filling the patterns completely, clean the cartridges. For
cleaning, try copying or printing the fax again. To reprint the fax
If cleaning does not help, replace the print cartridges. For
–
• Check to see that you are using the right type of paper for your project. If
the paper you are using is too fibrous, the ink applied by your HP Fax
may not fully cover the print surface. Make sure you are using a paper
that is appropriate for your HP Fax. For information, see recommended
The copy or fax is
faded, or the
colors are dull.
Note: Your HP Fax is designed to work well on most paper types. Test a
variety of paper types before buying large quantities. Find a paper type
that works well and is easy to purchase. HP Premium Papers are
designed for the best quality results.
• Adjust the contrast of the copy or fax. For information on adjusting the
For information on adjusting the contrast for fax jobs, see change contrast
• Print a self-test report to check the print cartridges. For information, see
–
If the colors do not appear correct on the self-test report, clean the
page 41. After cleaning, try copying or printing the fax again. To
–
If cleaning does not help, replace the print cartridges. For
• Check to see if you are using the right type of paper for your project. If
the paper you are using is too fibrous, the ink applied by your HP Fax
may not fully cover the print surface. For most documents, plain paper
works well. For documents with dense output, such as high-contrast
graphics or photographs, use HP Premium paper for best results. For
The copy or fax is
fuzzy or blurry.
• Check to make sure you are using the highest possible copy quality. For
50
hp fax 1230
Download from Www.Somanuals.com. All Manuals Search And Download.
quality problems
problem
solution
• Check to see if your original contains thin lines. If your original contains
lines that are too thin, they may disappear in places when you copy or
fax it. Try darkening the lines on your original, and then copy or fax it
again.
• Check to see if your original is wrinkled. If your original is heavier than
24 lb. and is wrinkled, some lines could be missed during copying or
faxing. Flatten the original document, and copy or fax it again.
The copy or fax
has vertical
streaks or is
missing vertical
lines.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting help
copy problems
problem
solution
• Make sure the HP Fax is turned on. If the front-panel display is blank, the
HP Fax is turned off. Make sure the HP Fax is connected to a power
outlet. For information on turning on and connecting your HP Fax to a
power outlet, see the Setup Poster.
Nothing happens
when I try to copy.
• Make sure your original is fully inserted into the automatic document
feeder (ADF). When you place your original into the ADF, Original
Loaded displays on the front panel. If this message does not appear,
remove your original and re-insert it. For information, see load originals
• When you are copying several pages or documents, you must wait until
the HP Fax completes the current copy job before starting a new copy
job.
• The HP Fax may be busy receiving a fax. Review the front-panel display
for any status messages.
• Check to see that you loaded the correct paper type in the input tray. For
Caution! Do not use the HP Fax to copy onto envelopes.
• Check to see if there is a paper jam. For more information on clearing a
• Verify that you are copying onto the same size paper as the original. This
problem is most common when trying to copy a legal-size paper onto
letter-size paper.
Parts my original
do not appear or
are cut off.
• Verify that you have selected the proper paper size for your project. For
• Make sure that you have correctly loaded the paper in the input tray and
that the input tray is properly installed. For information, see load paper
• Make sure the document guides are adjusted properly. The guides should
be close to the edges of the paper in the input tray, but must not bend the
• If you are copying from an original with no margins, reduce the copy to
make sure the text or images are not cropped. For information, see
Copies are too
Adjust the contrast of the copy. For information, see make copies lighter or
52
hp fax 1230
Download from Www.Somanuals.com. All Manuals Search And Download.
fax problems
fax problems
problem
solution
• If your fax contains a lot of graphics, it will take longer to send.
• If the phone line connection is “noisy,” it may cause the fax transmission
to be slow.
Fax transmission
is slow.
• If you selected a high resolution, consider using the standard resolution to
• If you are you faxing in color it will take longer to send. Consider sending
the fax in black and white.
• Contact the recipient to find out if something is wrong with the receiving
fax machine. The receiving fax machine may have a problem. Or, the
receiving fax may not be able to receive data at the same rate you are
sending data. If the receiving fax modem speed is slower, it will take
longer to send.
• Check to make sure there is paper in the input tray. For information, see
Pages of a fax I
received are
missing.
• Check to see if the fax was sent correctly. Check with the sender to find
out how many pages were sent. The sending fax machine may have
failed to feed each page of the original.
• Check to see if you are out of paper. If the HP Fax runs out of paper,
incoming faxes are stored in memory. For information on loading paper,
Faxes are
received, but are
not printing.
• Check to see if you have a paper jam. If the HP Fax is unable to print
because of a paper jam, incoming faxes are stored in memory. For
• Make sure each page of your original was picked up separately from the
ADF. Sometimes pages are missing because two or more pages of your
original fed into the ADF at the same time. Try re-sending the fax and
make sure each page feeds separately.
Pages of a fax I
sent are missing.
• Check with the recipient to see if there is a problem with the receiving fax
machine.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting help
problem
solution
• Check to see if you have you selected the desired number of rings and
check to make sure Auto Answer is on. For information on setting the
The HP Fax does
not answer after
the correct
number of rings.
• If you have a telephone answering machine connected to your phone
with an answering machine.
information on using the HP Fax with voice mail.
• Check to see if you have the ring pattern set correctly. If you subscribe to
a distinctive ring service through your telephone company, check that the
HP Fax ring pattern is set correctly. If you do not subscribe to a distinctive
ring service or do not have this service available in your area, make sure
that the ring pattern is set to All Rings. For information on setting the ring
54
hp fax 1230
Download from Www.Somanuals.com. All Manuals Search And Download.
fax problems
problem
solution
• Check to make sure Auto Answer is on. The green light next to the Auto
Answer button is lit when the feature is enabled. If the light is off, the
HP Fax will not automatically answer the phone when it rings. Press the
Auto Answer button to turn it on or off.
Incoming calls
are not being
answered.
• Check to see if the HP Fax is connected to the phone system correctly.
Make sure the phone line is connected. To test the connection:
–
–
Press Fax.
Press Start, Black or Start, Color. If the HP Fax is connected to the
phone system correctly, you will hear a dial tone.
Push the Cancel button to hang up. See the Setup Poster for
information on setting up the HP Fax.
–
• Check to see if the ring pattern is set correctly. If you subscribe to a
distinctive ring service through your telephone company, check that the
HP Fax ring pattern is set correctly. If you do not subscribe to a distinctive
ring service, make sure that the ring pattern is set to All Rings. For
information on setting the ring pattern, see change the answer ring
• If your HP Fax is on the same phone line as an answering machine, you
may need to change the number of rings. For information, see answer
• Check to see if you are using an ISDN (Integrated Services Digital
Network) service. The HP Fax is a Group 3 fax machine. It is not
designed for direct connection to an ISDN service. You can use the
HP Fax with an ISDN service by connecting it to an analog telephone
port (“R-interface”) on an ISDN terminal adapter.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting help
problem
solution
• Check to make sure you dialed the number correctly and that the number
you have entered is correct. For example, you might need to dial a “9”
prefix depending on your phone system.
• Check to see that the HP Fax is connected to the phone system correctly
and that the phone line is connected. To test the connection:
I am having
problems
connecting to
another fax
machine.
–
–
Press Fax.
Press Start, Black or Start, Color. If the HP Fax is connected to the
phone system correctly, you will hear a dial tone.
Push the Cancel button to hang up. See the Setup Poster for
information on setting up the HP Fax.
–
• Check to make sure the telephone wall outlet is working properly. Try
connecting a working telephone and phone cord into the wall outlet you
are using for the HP Fax. If the phone does not work, call your local
phone company for service. If the phone does work, try reconnecting the
HP Fax to the telephone outlet using a different phone cord.
• Do you have a noisy phone line connection? If the failure was due to
noise on the phone line, you may be able to connect when you try again.
Try to send the fax again.
• If you have extension phones or other equipment on the same phone line
as the HP Fax, make sure that extension phones are not off the hook.
Disconnect other phone equipment and try to fax again.
• If you think something is wrong with the receiving fax machine, check
with the recipient. The receiving fax machine may have a problem.
• Are you using an ISDN (Integrated Services Digital Network) service? If
so, the HP Fax is a Group 3 fax machine. It is not designed for direct
connection to an ISDN service. You can use the HP Fax with an ISDN
service by connecting it to an analog telephone port (“R-interface”) on an
ISDN terminal adapter.
56
hp fax 1230
Download from Www.Somanuals.com. All Manuals Search And Download.
error messages
problem
solution
• Check to see that Auto Answer is on. The green light next to the Auto
Answer button in the front panel is lit when the feature is enabled. If the
light is off, the HP Fax will not automatically answer the phone when it
rings. Press the Auto Answer button to turn it on or off.
I cannot receive a
fax on my
extension lines.
• Make sure the HP Fax is connected to the phone system correctly. Make
sure the phone line is connected. To test the connection:
–
–
Press Fax.
Press Start, Black or Start, Color. If the HP Fax is connected to the
phone system correctly, you will hear a dial tone.
Push the Cancel button to hang up. See the Setup Poster for
information on setting up the HP Fax.
–
• Check to see if the telephone wall outlet is working properly. Try
connecting a working telephone and phone cord into the wall outlet you
are using for the HP Fax. If the phone does not work, call your local
phone company for service. If the phone does work, try reconnecting the
HP Fax to the telephone outlet using a different phone cord.
• If your HP Fax is on the same phone line as an answering machine, you
may need to change the number of rings. For information, see set the
answering machine with your HP Fax, see answer fax calls when you use
error messages
error message
solution
Broadcast fax
failure.
Do the following:
• Check to make sure you dialed the number correctly and that the number
you have entered is correct. For example, you might need to dial a “9”
prefix depending on your phone system.
• Check the log to find out more about the failure. The log contains error
codes for many common fax transmission errors. For information, see
57
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting help
error message
solution
Cannot load
document in the
automatic
Remove the document. Make sure you do not have any staples, paper clips,
or bent edges, and then reload it in the ADF. Make sure that you are using
a recommended paper type. Restart the job. If you are sending a fax, you
document feeder do not need to re-send the pages faxed before the error occurred. For
(ADF).
• Check to see if you are out of paper. If the HP Fax runs out of paper,
incoming faxes are stored in memory. If the memory becomes full, the
HP Fax stops answering calls. You need to print the faxes stored in
memory before the HP Fax can start receiving faxes again. To print the
faxes stored in memory, load paper and press Enter on the front panel.
HP Fax memory
full.
• Check to see if you have a paper jam. Clear the paper jam, and then
HP Fax/phone
line connector
needs
Turn the HP Fax off and on again to reconfigure the fax/phone line
connector.
reconfiguration.
HP Fax is
initializing.
When the HP Fax is initializing, please wait while the HP Fax starts up.
Need print
cartridge
alignment.
If you have installed new print cartridges, you must align the print cartridges
to ensure excellent print quality. After you insert a new cartridge, press Enter
on the front panel. For information on aligning print cartridges, see align
• Check to see that you have paper in the input tray. Load paper for your
output job. Make sure there is only one type of paper in the input tray.
Out of paper.
• Check to see if the back door of the HP Fax has been removed. If the
back door has been removed to clear a paper jam, be sure to replace
the back door to the closed position.
Paper size error. The paper size you are using is not compatible with the HP Fax. For
58
hp fax 1230
Download from Www.Somanuals.com. All Manuals Search And Download.
error messages
error message
solution
• Were you loading the print cartridges? If so, turn the HP Fax off. Flip the
latches down, and then turn the unit back on again. Make sure that you
wait at least 10 seconds for the carriage to stop before raising the
Print carriage
stalled.
• Check to see that the HP Fax is turned on. Look on the front-panel display
(or check for a green light on the front panel). If the display is blank, the
HP Fax is turned off. Check the connections. See the Setup Poster for
information on setting up the HP Fax.
• Are you using the HP Fax for the first time? Make sure that you have
removed all packing materials from the HP Fax.
• Are you using the print cartridge for the first time? Make sure that you
have removed the protective tape from the nozzles on both print
cartridges. Do not touch the gold contacts. For information on handling
• Do the print cartridges need to be cleaned? Print a self-test report to
check the print cartridges. For information on cleaning print cartridges,
• Did you try to add paper to the input tray while printing? Remove the
paper, turn off the HP Fax, and then unplug the power cable from the
back of the HP Fax. Wait a few seconds, and then plug in the power
cable and turn the HP Fax on.
• Check to see if the print cartridge is missing or the incorrect print
cartridge is installed. If not, remove and reinsert the cartridges, making
sure to snap them into their holders. For information, see replace the print
Print cartridge
missing.
• Did you remove the protective tape from the print cartridge? Carefully
remove the green tape from the print cartridge. Do not remove the gold
59
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting help
fax log error codes
Use this table to help you interpret the different codes that appear in the Results
column on the fax log. If you encounter the same error repeatedly, try turning off
error correction mode (ECM). The following table shows the codes specific to
Error Code
Error Definition
223 ECM
224
One or more received pages may not be readable.
225-231
There is a feature incompatibility with the sending fax machine.
The telephone connection was lost.
232-234
235-236 ECM
237
238
239-241 ECM
The sending fax machine sent an unexpected communication.
242
The remote fax machine is attempting to receive instead of send.
The sending fax machine prematurely ended the session.
243-244
245-246 ECM
247-248
249-251 ECM
There was a communication error with the sending fax machine.
252
253
Telephone line conditions were too poor to receive a fax.
The sending fax machine attempted to use an unsupported page width.
The telephone connection was lost.
281
282 ECM
283-284
285 ECM
286
290
There was a communication error with the sending fax machine.
The received fax could not be stored.
291
314-320
321
There is a feature incompatibility with the receiving fax machine.
There was a communication error with the receiving fax machine.
Telephone line conditions were too poor to send a fax.
The receiving fax indicated one or more pages may not be readable.
322-324
325-328 ECM
329-331
332-337
338-342 ECM
343
The receiving fax machine sent an unexpected communication.
The telephone connection was lost.
344-348
349-353 ECM
354-355
60
hp fax 1230
Download from Www.Somanuals.com. All Manuals Search And Download.
fax log error codes
Error Code
Error Definition
356-361
362-366 ECM
The receiving fax machine prematurely ended the session.
367-372
There was a communication error with the receiving fax machine.
373- 377 ECM
378-380
381
382
383
The telephone connection was lost.
The receiving fax machine stopped accepting pages.
The telephone connection was lost.
390
391
There was a communication error with the receiving fax machine.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting help
62
hp fax 1230
Download from Www.Somanuals.com. All Manuals Search And Download.
technical information
8
specifications
The following sections contain specifications for your HP Fax.
paper specifications
input tray capacities
type
paper weight
input tray* output tray†
ADF
20
Plain paper
Legal paper
Transparency film
16 to 24 lb. (60 to 90 gsm)
20 to 24 lb. (75 to 90 gsm)
N/A
150
150
25
50 black, 20 color
50 black, 20 color
30
20
N/A
* Maximum capacity
† Output tray capacity is affected by the type of paper and the amount of ink you are
using. HP recommends emptying the tray frequently.
paper sizes
Type
Size
input tray
ADF
Paper
Letter: 8.5 x 11 inch (215.9 x 279.4 mm)
Legal: 8.5 x 14 inch (215.9 x 355.6 mm)
A4: 210 x 297 mm
Yes
Yes
Transparency films
Custom
Letter: 8.5 x 11 inch (216 x 279 mm)
A4: 210 x 297 mm
No
Yes
Yes
3 x 5 inch to 8.5 x 14 inch (76.2 x 127 mm No
to 216 x 356 mm)
margin specifications
Top
Bottom
Left
Right
(leading edge) (trailing edge)*
Sheet Paper
U.S. Letter, U.S. Legal
ISO A4
.07 in. (1.8 mm) .46 in. (11.7 mm) .25 in. (6.4 mm) .25 in. (6.4 mm)
.07 in. (1.8 mm) .46 in. (11.7 mm) .13 in. (3.4 mm) .13 in. (3.4 mm)
* This margin is not LaserJet-compatible; however, the total writing area is compatible.
The writing area is offset from center by .21 inches (5.4 mm), which causes asymmetric
top and bottom margins.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
technical information
copy specifications
•
•
•
•
•
Digital image processing
Up to 99 copies from original
Digital zoom from 25% to 200% (varies by model)
Up to 12 cpm black, 8 cpm color
Copy speeds vary according to the complexity of the document
mode
speed (ppm)
up to 3
print resolution (dpi) scan resolution (dpi)*
†
Best
Black
Color
Black
Color
Black
Color
1200 x 1200
1200 x 1200
600 x 600
600 x 600
300 x 600
600 x 600
600 x 1200
600 x 1200
300 x 1200
300 x 1200
300 x 1200
300 x 1200
up to 1
Normal
Fast
up to 6
up to 4
up to 12
up to 8
* Maximum at 200% scaling
† On photo paper or premium inkjet paper
fax specifications
•
•
•
Walk-up color fax
Up to 100 speed-dials
Up to 80-page memory (based on ITU-T Test Image #1 at standard resolution. More
complicated pages or higher resolution will take longer and use more memory.
Varies by model.)
•
•
•
•
•
•
20-page automatic document feeder (ADF)
Automatic redial (up to five times)
Confirmation and activity reports
CCITT/ITU Group 3 fax with Error Correction Mode
33.6 Kbps transmission
3 seconds/page speed at 33.6 Kbps (based on ITU-T Test Image #1 at standard
resolution. More complicated pages or higher resolution will take longer and use
more memory)
•
•
•
Broadcast to 20 locations
Ring detect with automatic fax/answering machine switching
Delayed faxing
300 dpi
Photo (dpi)
200 x 200
300 x 300
Fine (dpi)
200 x 200
200 x 200
Standard (dpi)
200 x 100
Black
Color
300 x 300
300 x 300
200 x 200
physical specifications
•
•
•
•
Height: 9.22 inch (23.4 cm)
Width: 17.8 inch (45.2 cm)
Depth: 14.62 inch (37.1 cm)
Weight: 15.42 lb (7.0 kg)
64
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
specifications
power specifications
•
•
•
•
•
Power consumption: 50W maximum
Source (Input) Voltage: 100 to 240 VAC, grounded
Input Frequency: 50 to 60 Hz
Current: 1.0 A maximum
Figures are based on using the AC adapter that came with your unit (HP part
number 0950-3807).
environmental specifications
•
Recommended Operating Temperature Range: 15º to 32º C (59º to 90º F), 15% to
85% humidity, RH non-condensing
•
•
•
Allowable Operating Temperature Range: 5º to 40º C (41º to 104º F)
Non-operating (Storage) Temperature Range: -30º to 60º C (-22º to 140º F)
In the presence of high electromagnetic fields it is possible the output from the
HP Fax 1230 series may be slightly distorted
additional specifications
•
Memory: 8.0-MB ROM, 8.0-MB RAM (HP Fax 1230 series)
If you have Internet access, you can get acoustic information from the HP website at
environmental product stewardship program
protecting the environment
Hewlett-Packard is committed to providing quality products in an environmentally sound
manner. This product has been designed with several attributes to minimize impacts on our
environment.
For more information, visit HP’s Commitment to the Environment website at www.hp.com/
ozone production
This product generates no appreciable ozone gas (O3).
paper use
This product is suited for the use of recycled paper according to DIN 19309.
plastics
Plastic parts over 25 grams are marked according to international standards that enhance
the ability to identify plastics for recycling purposes at the end of the product’s life.
recycling program
HP offers an increasing number of product return and recycling programs in many
countries, as well as partnering with some of the largest electronic recycling centers
throughout the world. HP also conserves resources by refurbishing and reselling some of
its most popular products.
energy consumption
®
This product qualifies for ENERGY STAR , which is a voluntary program established to
encourage the development of energy-efficient office products.
ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR
partner, HP has determined that this product meets ENERGY STAR guidelines for energy
efficiency.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
technical information
material safety data sheets
Material safety data sheets (MSDS) can be obtained from the HP web site at
If you are in the United States or Canada and do not have access to the Internet, call the
U.S. HP FIRST fax-on-demand service at (800) 231-9300. Use Index number 7 for a listing
of the material safety data sheets.
International customers without Internet access should call (404) 329-2009 for further
information.
regulatory notices
The following sections are statements from various regulatory agencies.
notice to users of the U.S. telephone network: FCC requirements
This equipment complies with FCC rules, Part 68. On this equipment is a label that
contains, among other information, the FCC Registration Number and Ringer Equivalent
Number (REN) for this equipment. If requested, provide this information to your telephone
company.
An FCC-compliant telephone cord and a modular plug are provided with this equipment.
This equipment is designed to be connected to the telephone network or premises wiring
using a compatible modular jack which is Part 68-compliant. This equipment connects to
the telephone network through the following standard network interface jack: USOC
RJ-11C.
Use the REN to determine the quantity of devices you may connect to your telephone line
and still have all of those devices ring when your number is called. Too many devices on
one line may result in failure to ring in response to an incoming call. In most, but not all,
areas the sum of the RENs of all devices should not exceed five (5). To be certain of the
number of devices you may connect to your line, as determined by the REN, you should
call your local telephone company to determine the maximum REN for your calling area.
If this equipment causes harm to the telephone network, your telephone company may
discontinue your service temporarily. If possible, they will notify you in advance. If advance
notice is not practical, you will be notified as soon as possible. You will also be advised of
your right to file a complaint with the FCC. Your telephone company may make changes
in its facilities, equipment, operations, or procedures that could affect the proper operation
of your equipment. If they do, you will be given advance notice so you will have the
opportunity to maintain uninterrupted service.
If you experience trouble with this equipment, please contact the manufacturer or look
elsewhere in this manual for warranty or repair information. Your telephone company may
ask you to disconnect this equipment from the network until the problem has been corrected
or until you are sure that the equipment is not malfunctioning.
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subject to state tariffs. Contact your state’s public utility
commission, public service commission, or corporation commission for more information.
This equipment includes automatic dialing capability. When programming and/or making
test calls to emergency numbers:
•
•
Remain on the line and explain to the dispatcher the reason for the call.
Perform such activities in the off-peak hours, such as early morning or late evening.
Notice: The FCC hearing aid compatibility rules for telephones are not applicable to this
equipment.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use
a computer or other electronic device, including fax machines, to send any message unless
such message clearly contains in a margin at the top or bottom of each transmitted page
66
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
regulatory notices
or on the first page of transmission, the date and time it is sent and an identification of the
business, other entity, or other individual sending the message and the telephone number
of the sending machine or such business, other entity, or individual. (The telephone number
provided may not be a 900 number or any other number for which charges exceed local
or long-distance transmission charges.) In order to program this information into your fax
machine, you should complete the steps described in the software.
The United States Federal Communications Commission (in 47 CFR 15.105) has specified
that the following notice be brought to the attention of users of this product.
Declaration of Conformity: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may
cause undesired operation. Class B limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
Reorient the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Product Regulations Manager, Hewlett-Packard Company, San Diego, (858) 655-4100.
The user may find the following booklet prepared by the Federal Communications
Commission helpful: How to Identify and Resolve Radio-TV Interference Problems. This
booklet is available from the U.S. Government Printing Office, Washington DC, 20402.
Stock No. 004-000-00345-4.
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment
not expressly approved by the Hewlett-Packard Company may cause harmful interference
and void the FCC authorization to operate this equipment.
doc statement / déclaration de conformité (Canada)
Le présent appareil numérique n'émet pas de bruit radioélectrique dépassant les limites
applicables aux appareils numériques de la classe B prescrites dans le Règlement sur le
brouillage radioélectrique édicté par le ministère des Communications du Canada.
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
notice to users of the Canadian telephone network
Notice: This equipment meets the applicable Industry Canada Terminal Equipment
Technical Specifications. This is confirmed by the registration number. The abbreviation, IC,
before the registration number signifies that registration was performed based on a
Declaration of Conformity indicating that Industry Canada technical specifications were
met. It does not imply that Industry Canada approved the equipment.
Note: The Ringer Equivalence Number (REN) assigned to each terminal device provides
an indication of the maximum number of terminals allowed to be connected to a telephone
interface. The termination on an interface may consist of any combination of devices
subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the
devices does not exceed 5.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
technical information
notice to all users of the European Economic Area (EEA)
This product is designed to interwork with the analogue telephone networks in the
following countries:
Germany
France
UK
Netherlands
Italy
Spain
Belgium
Austria
Luxembourg
Denmark
Finland
Portugal
Sweden
Ireland
Norway
Greece
Switzerland
Network compatibility depends on customer-selected settings, which must be reset to use
the equipment on a telephone network in a country other than where the product was
purchased. Contact the vendor or Hewlett-Packard Company if additional product support
is necessary.
This equipment has been certified by the manufacturer in accordance with Directive 1999/
5/EC (annex II) for Pan-European single-terminal connection to the public switched
telephone network (PSTN). However, due to differences between the individual PSTNs
provided in different countries, the approval does not, of itself, give an unconditional
assurance of successful operation on every PSTN network termination point.
In the event of problems, you should contact your equipment supplier in the first instance.
This equipment is designed for DTMF tone dialing and loop disconnect dialing. In the
unlikely event of problems with loop disconnect dialing, it is recommended that you use
this equipment only with the DTMF tone dial setting.
notice to users of the German telephone network
The HP Fax 1230 series products are designed to connect only to the analogue
public-switched telephone network (PSTN). Please connect the TAE N telephone connector
plug, provided with the HP Fax 1230 series, into the wall socket (TAE 6) code N. The
HP Fax 1230 series products can be used as a single device and/or in combination (in
serial connection) with other approved terminal equipment.
geräuschemission
LpA < 70 dB
am Arbeitsplatz
im Normalbetrieb
nach DIN 45635 T. 19
68
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
declaration of conformity
declaration of conformity
According to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name and Address:
Hewlett-Packard Company, 16399 W. Bernardo Drive, San Diego, CA 92127-1899, USA
declares that the product
Product Name:
hp fax 1230 series Q1678A
Model Number(s):
hp fax 1230 (Q1685A), hp fax 1230xi (Q1686A),
hp fax 1235 (Q1684A)
Product Options:
None
conforms to the following Product Specifications:
Safety:
IEC 60950:1991 +A1, A2, A3 & EMC:
CISPR22:1997/ EN55022:1998, Class B
A4
CISPR24:1997/ EN55024:1998
IEC 61000-3-2:1995 / EN61000-3-2:1995
IEC 61000-3-3:1994 / EN61000-3-3:1995
FCC Part 15-Class B / ICES-003, Issue 2 /
VCCI -2
EN60950:1992 +A1, A2, A3, A4
& A11
UL1950/CSA 22.2 No. 950, 3rd
Ed.: 1995
Telecom: TBR21 (1998)
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/
EC and the EMC Directive 89/336/EC and with the R&TTE Directive 1999/5/EC (Annex
II) and carries the CE-marking accordingly.
European Contact for regulatory topics only: Your local Hewlett-Packard Sales and Service
Office or Hewlett-Packard GmbH. Department HQ-TRE, Herrenberger Strasse 130,
D-71034 Böblingen, Germany (Fax + 49-7031-14-3143)
69
Download from Www.Somanuals.com. All Manuals Search And Download.
technical information
70
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
get hp fax 1230 series support
9
This section explains the service information provided by Hewlett-Packard.
If you are unable to find the answer you need in the documentation supplied with
your product, you can contact one of the HP support services listed in the
following pages. Some support services are available only in the U.S. and
Canada, while others are available in many countries worldwide. If a support
service number is not listed for your country or region, contact your nearest
authorized HP dealer for help.
get support and other information from the internet
If you have Internet access, you can get more information from the HP website at
www.hp.com/support. The website offers technical support, drivers, supplies,
and ordering information.
hp customer support
Software programs from other companies may be included with your HP Fax. If
you experience problems with any of those programs, you will receive the best
technical assistance by calling the experts at that company.
If you need to contact HP Customer Support, do the following before you call.
1
Make sure that:
a. Your HP Fax is plugged in and turned on.
b. The specified print cartridges are installed correctly.
c. The recommended paper is properly loaded in the input tray.
2
Reset your HP Fax:
a. Turn off the HP Fax using the On button located on the unit’s front
panel.
b. Unplug the power cord from the back of the HP Fax.
c. Plug the power cord back into the HP Fax.
d. Turn on the HP Fax using the On button.
3
71
Download from Www.Somanuals.com. All Manuals Search And Download.
get hp fax 1230 series support
4
If you are still experiencing problems and need to speak with an
HP Customer Support Representative:
–
Have your serial number and service ID ready. To display your serial
number, on the front panel, press Enter and Start, Black at the same
time, until the serial number appears in the front-panel display. To
display your service ID, on the front panel, press Enter and Start, Color
at the same time, until SERV ID: and the number appear in the
front-panel display.
–
information on printing this report.
–
–
Make a color copy.
Be prepared to describe your problem in detail.
5
Call HP Customer Support. Be near your unit when you call.
call in the U.S. during warranty
Call (208) 323-2551 Monday through Friday from 6:00 A.M. to 10:00 P.M.
Mountain Standard Time (MST) and Saturdays from 9:00 A.M. to 4:00 P.M.
MST. This service is free during the warranty period; however, your standard
long-distance phone charges still apply. A fee may apply outside the warranty
period.
call in the U.S. during warranty
Call (208) 323-2551. U.S. phone support is available in both English and
Spanish languages 24 hours a day, 7 days a week. (Days and hours of support
may change without notice.) This service is free during the warranty period;
however, your standard long-distance phone charges still apply. A fee may apply
outside the warranty period.
call elsewhere in the world
The numbers listed below are current as of the printing date of this guide. For a
list of current international HP Support Service numbers, visit this address and
choose your own country/region or language:
For Korea, you can visit this address:
For Japan, you can visit this address:
You can call the HP support center in the following countries or regions. If your
country/region is not listed, contact your local dealer or nearest HP Sales and
Support Office to find out how to obtain services.
Support service is free during the warranty period; however, your standard
long-distance phone charges will apply. In some cases, a flat fee per single
incident will also apply.
For phone support in Europe, please check for the details and conditions of
phone support in your country/region by consulting the following Web site:
72
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
prepare your hp fax for shipment
Alternatively, you can ask your dealer or call HP at the phone number indicated
in this booklet.
As part of our constant efforts to improve our phone support service, we advise
you to check our website on a regular basis for new information regarding
service features and delivery.
country/region
Austria
hp technical support country/region
hp technical support
+353 (0) 1 662 5525
+39 (0) 226410350
+31 (0) 20 606 8751
+351 21 3176333
+43 (0) 810 00 6080
+32 (0) 2 626 8806
+32 (0) 2 626 8807
(905) 206 4663
Ireland
Belgium (Dutch)
Belgium (French)
Italy
Netherlands
Portugal
Canada during
warranty
Canada post-warranty
(per-call charge)
1-877-621-4722
Spain
+34 902 321 123
*
Europe (English)
+44 (0) 207 512 5202
Switzerland
+41 (0) 84 880 1111
+44 (0) 207 512 52 02
France (0.34 Euro/min.) 0892 69 60 22
United Kingdom
Germany (0.12 Euro/
min.)
+49 (0) 180 52 58 143
* This Call Center supports German, French, and Italian speaking customers in Switzerland.
prepare your hp fax for shipment
If after contacting HP Customer Support or returning to the point of purchase, you
are requested to send your unit in for service, please follow the power off and
rebox steps below to avoid further damage to the HP product.
1
Turn on the HP Fax.
Disregard steps 1 through 6 if your unit will not turn on and the print
carriage is in the home position. You will not be able to remove the print
cartridges. Proceed to step 7.
2
3
Open the print-cartridge access door.
Remove the print cartridges from their holders, and lower the latches.
Caution! Remove both print cartridges and lower both latches.
Failure to do so may damage your unit.
the print cartridges.
4
Place the print cartridges in an airtight bag so they will not dry out, and
put them aside (do not send them with the unit, unless instructed to by the
HP customer support call agent).
5
6
Turn off the HP Fax.
Close the print-cartridge access door.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
get hp fax 1230 series support
7
Remove the front-panel cover as
follows:
a. Slip your hand into the ADF,
behind the front panel, and
lift up.
b. Insert a small screwdriver
into the round hole behind
the keypad and press firmly
to pop off the front panel.
8
9
Retain the front-panel cover. Do
not return the front-panel cover
with the unit.
If available, pack the unit for
shipment using the original
packing materials or the
packaging materials that came
with your exchange unit.
If you do not have the original
packaging materials, please use
other adequate packaging
materials. Shipping damage
caused by improper packaging
or improper transportation is not
covered under the warranty.
10 Include the following items in the box:
–
–
–
A brief description of symptoms for service personnel (samples of print
quality problems are helpful).
A copy of the sales slip or other proof of purchase to establish the
warranty coverage period.
Your name, address, and a phone number where you can be reached
during the day.
11 Place the return shipping label on the outside of the box.
hp fax 1230 series warranty
Duration of Limited Warranty (hardware and labor): 1 Year
Duration of Limited Warranty (CD media): 90 Days
Duration of Limited Warranty (ink cartridges): 90 Days
warranty service
express service
To obtain HP express repair service, the customer must contact an HP service office or an
page 71 for steps to take before calling Customer Support.
74
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
hp fax 1230 series warranty
If a customer unit needs a minor part replacement and these parts can normally be
replaced by the customer, the customer-replaceable components may be serviced through
expedited part shipment. In this event, HP will prepay shipping charges, duty and taxes;
provide telephone assistance on replacement of the component; and pay shipping
charges, duty, and taxes for any part that HP asks to be returned.
The HP Customer Support Center may direct customers to designated authorized service
providers who are certified by HP to service the HP product.
warranty upgrades
Upgrade your standard factory warranty to a total of three years with the
HP SUPPORTPACK. Service coverage begins on product purchase date and the pack must
be purchased within the first 180 days of product purchase. This program offers phone
support from 6:00 A.M. to 10:00 P.M. Mountain Standard Time (MST) Monday through
Friday and 9:00 A.M. to 4:00 P.M. (MST) on Saturdays. If during your technical support
call it is determined that you need a replacement product, then HP will ship you this product
next business day free of charge. Available in U.S. only.
For more information, please call 1-888-999-4747 or visit the following HP website:
Outside the U.S., please call your local HP Customer Support office. See prepare your
return your hp fax 1230 series for service
Before returning your HP Fax for service, you must call HP Customer Support. See hp
hewlett-packard limited global warranty statement
extent of limited warranty
Hewlett-Packard (“HP”) warrants to the end-user customer (“Customer”) that each
HP Fax 1230 series product (“Product”), including related software, accessories, media,
and supplies, shall be free from defects in material and workmanship for the duration,
which begins on the date of purchase by the Customer.
For each hardware Product, the duration of HP’s limited warranty is one year for parts and
one year for labor. For all other Products, the duration of HP’s limited warranty for both
parts and labor is ninety days.
For each software Product, HP’s limited warranty applies only to a failure to execute
programming instructions. HP does not warrant that the operation of any Product shall be
uninterrupted or error free.
HP’s limited warranty covers only those defects which arise as a result of normal use of a
Product, and does not cover any other problems, including those which arise as a result of
(a) improper maintenance or modification, (b) software, accessories, media, or supplies
not provided or supported by HP, or (c) operation outside the Product’s specifications.
For any hardware Product, the use of a non-HP ink cartridge or a refilled ink cartridge does
not affect either the warranty to the Customer or any HP support contract with the Customer.
However, if Product failure or damage is attributable to the use of a non-HP or refilled ink
cartridge, HP shall charge its standard labor and materials charges to service the Product
for the failure or damage.
If HP receives, during the applicable warranty period, notice of a defect in any Product,
HP shall either repair or replace the defective Product, at HP’s option. Where labor charges
are not covered by HP’s limited warranty, repairs shall be at HP’s standard charges for
labor.
If HP is unable to repair or replace, as applicable, a defective Product which is covered by
HP’s warranty, HP shall, within a reasonable time after being notified of the defect, refund
the purchase price for the Product.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
get hp fax 1230 series support
HP shall have no obligation to repair, replace, or refund until the Customer returns the
defective Product to HP.
Any replacement product may be either new or like-new, provided that it has functionality
at least equal to that of the Product being replaced.
HP products, including each Product, may contain remanufactured parts, components, or
materials equivalent to new in performance.
HP's limited warranty for each Product is valid in any country or locality where HP has a
support presence for the Product and where HP has marketed the Product. The level of
warranty service may vary according to local standards. HP shall have no obligation to
alter the form, fit, or function of the Product in order to make it operate in a country or
locality for which the Product was never intended to operate.
limitations of warranty
TO THE EXTENT ALLOWED BY LOCAL LAW, NEITHER HP NOR ITS THIRD PARTY
SUPPLIERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER
EXPRESS OR IMPLIED, WITH RESPECT TO THE COVERED HP PRODUCTS, AND
SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR
PURPOSE.
limitations of liability
To the extent allowed by local law, the remedies provided in this Limited Warranty
Statement are the Customer’s sole and exclusive remedies.
TO THE EXTENT ALLOWED BY LOCAL LAW, EXCEPT FOR THE OBLIGATIONS
SPECIFICALLY SET FORTH IN THIS LIMITED WARRANTY STATEMENT, IN NO EVENT
SHALL HP OR ITS THIRD PARTY SUPPLIERS BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON CONTRACT,
TORT, OR ANY OTHER LEGAL THEORY AND WHETHER ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.
local law
This Limited Warranty Statement gives the Customer specific legal rights. The Customer
may also have other rights which vary from state to state in the United States, from province
to province in Canada, and from country to country elsewhere in the world.
To the extent this Limited Warranty Statement is inconsistent with local law, this Statement
shall be deemed modified to be consistent with such local law. Under such local law,
certain disclaimers and limitations of this Statement may not apply to the Customer. For
example, some states in the United States, as well as some governments outside the United
States (including provinces in Canada), may:
Preclude the disclaimers and limitations in this Statement from limiting the statutory rights
of a consumer (e.g. the United Kingdom);
Otherwise restrict the ability of a manufacturer to enforce such disclaimers or limitations; or
Grant the Customer additional warranty rights, specify the duration of implied warranties
which the manufacturer cannot disclaim, or not allow limitations on the duration of implied
warranties.
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND, THE TERMS
IN THIS LIMITED WARRANTY STATEMENT, EXCEPT TO THE EXTENT LAWFULLY
PERMITTED, DO NOT EXCLUDE, RESTRICT, OR MODIFY, AND ARE IN ADDITION TO,
THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THE COVERED HP
PRODUCTS TO SUCH CUSTOMERS.
76
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
index
set paper type, 8
connect and use other office
equipment, 28
connect to a phone, 29
connect to answering
machine, 43
connect to modem, 43
connect to phone, 43
contrast, 21
create group speed-dial
settings, 16
create individual speed-dial
settings, 15
date and time, 22
default settings, 20
delay send, 18
A
address book
specifications, 64
speed, 34
send faxes to groups, 16
ADF (automatic document
feeder), 5
adjust sound volume for fax, 24
align print cartridges, 41
answer ring pattern, 26
answering machine
connect to the HP Fax, 43
use with the HP Fax, 30
Auto Answer
troubleshooting, 52
country/region setup, 43
D
darken copies, 34
date, set, 22
declaration of conformity, 69
defaults
receive faxes
automatically, 14
set new copy setting
defaults, 35
set new fax setting
defaults, 20
delete speed-dial entries, 17
detect old fax machines, 28
distinctive ringing, 26
Error Correction Mode
(ECM), 28
B
delay faxes, 18
detect faxes from older fax
machines, 28
backup fax reception, 27
best copy quality, 34
broadcast faxes, 13
busy numbers - redial
automatically, 26
buttons, front panel, 2
distinctive ringing, 26
error reports, 19
fax log error codes, 60
fit to page, 14
E
edit
forward faxes, 24
header, 22
speed-dial groups, 17
enhance copies, 35
enlarge copies, 35
environmental
C
cancel - scheduled faxes, 19
clean
manually print reports, 19
off-hook dialing, 31
poll for faxes, 19
print reports, 19
specifications, 65
Error Correction Mode
(ECM), 28
exterior, 39
print cartridges, 41
color
receive, 14
redial busy numbers, 26
redial unanswered
numbers, 26
reprint faxes in memory, 27
resolution, 21
ring pattern, 14
enhance, 35
faxes, 13
F
contrast
factory defaults, restore, 41
fast copy quality, 34
change for faxes, 21
improve photo color, 35
adjust sound volume, 24
answer ring pattern, 26
automatically generate
reports, 19
cancel scheduled faxes, 19
change settings, 12
change the answer ring
pattern (distinctive
ringing), 26
color, 13
confirmation reports, 19
default settings, 35
enhance, 35
rings to answer, 23
save frequently-used
numbers, 15
iron-on transfers, 36
lighten or darken, 34
menu options, 37
number of copies, 34
paper-type settings, 9
photos, 36
schedule, 18
send, 11
send to multiple
recipients, 13
set automatic reduction, 27
set backup fax reception, 27
set paper size, 10
set the paper type, 8
quality, 34
reduce or enlarge, 35
set paper size, 10
77
Download from Www.Somanuals.com. All Manuals Search And Download.
set up speed-dial, 15
specifications, 64
test, 12
use with a phone, 29
use with an answering
machine, 30
setup options, 42
modem
faxes from older
machine, 28
receive faxes, 14
recommended papers, 7
redial - busy numbers, 26
redial unanswered
numbers, 26
connect to the HP Fax, 43
multiple recipients
groups, 16
send fax to, 13
use with voice mail, 30
fax log error codes, 60
forward faxes, 24
front panel
reduce
N
copies, 35
normal copy quality, 34
number of copies, 34
faxes automatically, 27
regulatory information, 66
reports
buttons, 2
enter text, 23
O
Automatic Reports Setup, 20
automatically generate fax
reports, 19
manually generate fax
reports, 19
print Fax Log, 20
print Last Transaction
reports, 20
print Menu Settings, 20
print Self-Test Report, 20
self-test, 39
off-hook dialing, 31
one-touch speed-dial
buttons, 17
G
group speed-dial settings
create, 16
order print cartridges, 81
edit, 17
P
paper
H
fragile, load, 5
load, 6
I
not recommended, 8
recommended, 7
set for coping, 8
set for faxing, 8
set paper size, 10
specifications, 63
tips on loading, 8
paper-type settings for copy, 9
phone
individual speed-dial
settings, 15
cartridges
Speed Dial List, 20
reprint faxes in memory, 27
resolution
fax, 21
restore factory settings, 41
iron-on t-shirt transfers, 36
J
jams, paper, 45
S
schedule
cancel scheduled faxes, 19
K
faxes, 18
keypad, enter text, 23
self-test report, 39
send
use with the HP Fax, 29
photos
L
color faxes, 13
delay faxes, 18
faxes to multiple
recipients, 13
language setup, 43
legal-size paper, fax, 14
lighten copies, 34
load
copy, 36
enhance, 35
fragile, load, 5
physical specifications, 64
poll for faxes, 19
power specifications, 65
print
paper, 6
forward faxes, 24
send faxes, 11
set paper size, 10
set the paper type, 8
settings
print cartridges, 40
special paper, 8
paper-type settings, 9
self-test report, 39
print cartridges
align, 41
M
maintenance
align print cartridges, 41
clean exterior, 39
clean print cartridges, 41
replace print cartridges, 40
restore factory settings, 41
self-test report, 39
menus
clean, 41
order, 81
language and country/
region, 43
problems with, 46
replace, 40
test, 39
paper-type for copy, 9
paper-type for print, 9
setup menu options, 42
silent detect, 28
print settings - recommended, 9
copy options, 37
fax options, 32
R
receive
78
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
sound volume - adjust, 24
specifications
use speed-dial button, 18
speed-dial button, 18
subscriber identification
code, 22
print cartridges, 46
quality problems, 49
copy, 64
tips to avoid paper jams, 46
environmental, 65
fax, 64
U
margin, 63
T
unanswered numbers - redial
physical, 64
text
automatically, 26
power, 65
enhance, 35
speed dial, 15
speed dialing
create individual
settings, 15
V
enter on keypad, 23
time, set, 22
voice mail
use with the HP Fax, 30
volume
transparency film
load, 8
delete entries, 17
edit existing groups, 17
group settings, 16
use one-touch speed
dials, 17
adjust volume for fax, 24
copy problems, 52
output problems, 48
paper jams, 45
W
79
Download from Www.Somanuals.com. All Manuals Search And Download.
index
hp fax 1230 series
Download from Www.Somanuals.com. All Manuals Search And Download.
80
order supplies
Use the following information for ordering supplies for your HP Fax 1230 series.
order media
To order media such as HP Premium Inkjet Paper, HP Premium Inkjet
Transparency Film, HP Iron-On T-shirt Transfer paper, or HP Greeting Cards, see
one of the following:
•
•
From this website, you can access hpshopping.com for your specific
language or region.
order print cartridges
The following table lists the print cartridges that you can use with the
HP Fax 1230 series. Use the following information to determine which print
cartridge to order.
print cartridges
hp reorder number
HP black print cartridge
HP tri-color print cartridge
#15, 25 ml black print cartridge (C6615d)
#78, 19 ml tri-color print cartridge (C6578d)
#78, 38 ml tri-color print cartridge (C6578a)
If you have Internet access, you can get more information from the HP website at:
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Visit the hp fax information center
It has everything you need to get the most value from your HP Fax.
Technical Support
Supplies and Ordering Information
•
•
•
•
Project Tips
Ways to Enhance Your Product
© 2003 Hewlett-Packard Company
Printed in the U.S.A., Germany, or Singapore.
*Q1685-90103*
*Q1685-90103*
Q1685-90103
Download from Www.Somanuals.com. All Manuals Search And Download.
|