HP Passport 1912nm and 1912nc
Internet Monitors
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Guide
This guide provides information on setting up and using the Internet monitor.
WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily
harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could result in
damage to equipment or loss of information.
NOTE: Text set off in this manner provides important supplemental information.
ENWW
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
About This Guide
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
1 Product Features ............................................................................................................................................ 1
2 Setting Up the Monitor ................................................................................................................................... 3
Front Panel Controls .......................................................................................................................... 12
3 Using the Net Mode Interface ...................................................................................................................... 15
Browsing the Internet ......................................................................................................................... 16
Watching Videos ................................................................................................................................ 17
Viewing Photographs ......................................................................................................................... 18
Slide Show Options ........................................................................................................... 19
ENWW
v
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Finding More Information ............................................................................................................................. 23
5 Technical Specifications .............................................................................................................................. 24
vi
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Product Features
HP Passport 1912nm and 1912nc Internet Monitors
The HP Passport 1912nm and HP Passport 1912nc Internet monitors are designed to provide easy,
simple access to the internet, streaming views of media content (video, audio, photos) directly
through the monitor without the need for a PC. The monitors can also operate as standard external
monitors when connected to a PC.
The Internet monitors have an active matrix, thin-film transistor (TFT) panel. The monitor models and
features include:
●
1912nm and 1912nc models, 47 cm (18.5-inch) diagonal viewable area display with 1366 x 768
resolution, plus full-screen support for lower resolutions; includes custom scaling for maximum
image size while preserving original aspect ratio
●
●
●
Non-glare panel with CCFL backlight
Web browser, video player, music player, and photo viewer
Internet access and streaming views of media content without the need for a PC when in Net
mode
●
●
●
●
●
●
PC connectivity support when used as a standard monitor in PC mode
Plug and play capability in PC mode
Mode button on front panel that toggles between PC mode and Net mode
5ms response time
Fast boot time
USB 2.0 hub with one upstream port (connects to a computer) and five downstream ports
(connects to USB devices)
●
●
●
●
●
●
Audio in and audio out ports
Built-in stereo speakers
4-in-1 media card reader (SD, MMC, MS, xD)
Video signal input to support VGA analog
Wired USB keyboard and mouse included
Removable stand and Video Electronics Standards Association (VESA) standard mounting
holes for flexible mounting solutions, including wall-mounting
ENWW
HP Passport 1912nm and 1912nc Internet Monitors
1
Download from Www.Somanuals.com. All Manuals Search And Download.
●
●
●
Security slot provision on rear of monitor for optional cable lock
Tilt capability
On-Screen Display (OSD) adjustments in several languages for easy setup and screen
optimization
●
●
●
Energy saver feature to meet requirements for reduced power consumption
Energy Star® qualified
Compliant with the following regulated specifications (for additional certifications and agency
support):
◦
◦
European Union CE Directives
Swedish TCO Requirements
Net Mode vs PC Mode
The monitor can operate as a stand-alone Internet monitor (Net mode) or as a standard external
monitor connected to a PC (PC mode).
●
Net Mode: No PC is required. An active Ethernet cable is required for Internet access. In this
mode you can browse the Internet, watch videos, listen to music, or view photographs.
●
PC Mode: A PC is required. In this mode the monitor functions as a standard monitor and is
totally independent of the Net mode interface and settings.
You can set up the monitor for both Net mode and PC mode and switch between the two modes by
pressing the Mode button on the front of the monitor.
2
Chapter 1 Product Features
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Setting Up the Monitor
You can install the monitor on a desktop or mount it on a mounting fixture such as a wall mount or
swing arm. Be sure to place the monitor in a convenient, well- ventilated location. Connect the
monitor cables after you have installed the monitor.
To set up the monitor, ensure that the power is turned off to the monitor and all attached devices,
then follow the instructions below for your configuration.
Preparing the Monitor for Desktop Use
To assemble the monitor for desktop use:
1. Set the monitor screen face down on a flat, soft, protected table or desk surface with the support
column overhanging the edge.
2. Align the center column with the base and push the center column onto the base (1). Then align
the monitor support column with the center column and push the monitor all the way onto the
center column (2) until it snaps securely in place.
Figure 2-1 Installing the Monitor Center Column and Base
3. Lift the monitor to an upright position and place on a flat, stable surface.
ENWW
Preparing the Monitor for Desktop Use
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the Monitor for Wall-Mounting
NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket.
To attach the monitor to a mounting fixture:
1. Set the monitor screen face down on a flat, soft, protected table or desk surface with the support
column overhanging the edge.
2. If the center column and base are attached to the monitor, pinch together the two release tabs
on the bottom of the base (1) and pull the base off the center column (2). Then press the button
on the rear of the center column (3) and slide the center column off the monitor support column
(4).
Figure 2-2 Removing the Monitor Center Column and Base
3. Remove the two screws that attach the support column to the monitor (1), then slide the support
column back and remove it from the monitor (2).
Figure 2-3 Removing the Monitor Support Column
4
Chapter 2 Setting Up the Monitor
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
4. To attach the monitor to a mounting fixture, insert four 10mm screws through the holes on the
mounting plate and into the mounting holes on the monitor.
CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To
attach a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long
screws are required. Longer screws must not be used because they may damage the monitor. It
is important to verify that the manufacturer’s mounting solution is compliant with the VESA
standard and is rated to support the weight of the monitor display panel. For best performance, it
is important to use the power and video cables provided with the monitor.
Figure 2-4 Mounting the Monitor
ENWW
Preparing the Monitor for Wall-Mounting
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Components
Figure 2-5 Rear Components
Component
Function
1
2
AC Power Connector
Audio In Connector
Connects the AC power cord to the monitor.
Connects an input audio cable between the monitor and a
PC when using the monitor in PC mode.
3
4
5
6
Audio Out Connector
VGA Connector
Connects an output audio cable between the monitor and an
external audio device.
Connects a VGA cable between the monitor and a PC when
using the monitor in PC mode.
Ethernet Connector
USB In Connector
Connects an Ethernet cable to the monitor when using the
monitor in Net mode.
Connects the USB hub cable to the monitor's USB hub
connector and to a host USB port/hub on a PC so that the
USB ports on the monitor are active when using the monitor
in PC mode.
7
4 USB Out Connectors
USB Out Connector
Connects external USB devices to the monitor.
Connects external USB devices to the monitor.
8
9
4-in-1 Media Card Reader Slot Supports SD, MMC, MS, and xD cards.
10
11
Lock Slot
Speakers
Attaches a locking mechanism to the monitor.
Two 2-watt stereo speakers.
NOTE: In PC mode, a USB upstream cable (not provided) must be connected between the PC and
the monitor's USB In connector in order for the USB Out connectors to function. In Net mode, the
USB Out connectors function without connecting to a PC.
6
Chapter 2 Setting Up the Monitor
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Cables
The cable connections required depends on whether you will operate the monitor as a stand-alone
Internet monitor (Net mode) or as a standard external monitor connected to a PC (PC mode).
NOTE: You can connect the cables for both Net mode and PC mode and switch between the two
modes by pressing the Mode button on the front of the monitor.
Connecting the Cables for Net Mode
1. Place the monitor in a convenient, well-ventilated location.
2. Connect an active Ethernet cable to the Ethernet port on the monitor's rear panel.
Figure 2-6 Connecting the Ethernet Cable
ENWW
Connecting the Cables
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Connect the supplied keyboard and mouse (required to navigate) to the USB ports on the
monitor's rear panel.
Figure 2-7 Connecting the Keyboard and Mouse
4. Connect one end of the power cord to the AC power connector on the back of the monitor and
the other end to an electrical wall outlet.
Figure 2-8 Connecting the Power Cord
8
Chapter 2 Setting Up the Monitor
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Cables for PC Mode
1. Place the monitor in a convenient, well-ventilated location near the PC.
2. Connect the supplied keyboard and mouse (required to navigate) to the USB ports on the
monitor's rear panel.
Figure 2-9 Connecting the Keyboard and Mouse
3. Connect a VGA cable between the VGA connector on the PC and the VGA connector on the
rear of the monitor.
Figure 2-10 Connecting the VGA Cable
ENWW
Connecting the Cables
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Connect the upstream end of a USB cable to the USB In connector on the monitor's rear panel
and the downstream end to a USB Out connector on the PC.
NOTE: This step is optional. However, the USB cable is required for the USB Out ports and
the 4-in-1 media card reader on the monitor to function in PC mode.
Figure 2-11 Connecting a USB Cable
5. Connect one end of an audio cable to the Audio In connector on the monitor's rear panel and the
other end to an Audio Out connector on the PC.
NOTE: This step is optional. However, the audio cable is required for the monitor's speakers to
function in PC mode.
Figure 2-12 Connecting an Audio Cable
10 Chapter 2 Setting Up the Monitor
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Connect one end of the power cord to the AC power connector on the back of the monitor and
the other end to an electrical wall outlet.
Figure 2-13 Connecting the Power Cord
7. After turning on power to the monitor, you must press the Mode button on the monitor's front
panel to change from Net mode to PC mode.
Figure 2-14 Pressing the Mode Button
ENWW
Connecting the Cables 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Controls
Figure 2-15 Monitor Front Panel Controls
Table 2-1 Monitor Front Panel Controls
Control
Function
1
Menu
Opens the On-Screen Display (OSD) menu, selects items within the OSD
menu, and closes the OSD menu.
2
3
– (Minus)
If the OSD menu is on, press to navigate backward through the OSD
menu and decrease adjustment levels.
If the OSD menu is inactive, press to open the OSD volume control menu
and adjust the volume level.
+ (Plus)
If the OSD menu is on, press to navigate forward through the OSD menu
and increase adjustment levels.
If the OSD menu is inactive and the monitor is in Net mode, press to open
the OSD volume control menu and adjust the volume level.
If the OSD menu is inactive and the monitor is in PC mode, press to
activate the auto adjustment feature to optimize the screen image.
4
5
6
Mode
Toggles the monitor between Net mode and PC mode.
Turns the monitor on or off.
Power
Power LED
Blue = Fully powered.
Amber = Sleep mode.
Flashing Amber = Sleep Timer mode.
12 Chapter 2 Setting Up the Monitor
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Tilt
For optimal viewing, adjust the screen tilt to your own preference.
1. Face the front of the monitor and hold the base so that you do not topple the monitor while
changing the tilt.
2. Adjust the tilt by moving the top edge of the monitor either toward or away from you, without
touching the screen.
Figure 2-16 Adjusting the Tilt
Installing a Cable Lock
You can secure the monitor to a fixed object with an optional cable lock available from HP.
Figure 2-17 Installing a Cable Lock
ENWW
Adjusting the Tilt 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning on the Monitor for the First Time
After connecting the cables, press the power button on the front of the monitor to turn it on.
NOTE: Net mode is the monitor's default mode. You can toggle between Net mode and PC mode
by pressing the Mode button on the monitor's front panel.
CAUTION: Burn-in image damage may occur on monitors that display the same static image on
screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you
should always turn off the monitor when it is not in use for a prolonged period of time. Image retention
is a condition that may occur on all LCD screens. Monitors with a “burned-in image” are not covered
under the HP warranty.
* A prolonged period of time is 12 consecutive hours of non-use.
The first time you turn on the monitor there will be a brief video highlighting the monitor's features
(select models only). You can bypass the video by pressing the Esc key on your keyboard. If you
would like to play this video again, it is stored as a sample in the Video player.
After the video ends or is bypassed the Startup Wizard will begin. Follow the instructions in the
Startup Wizard to:
●
●
●
●
●
Select your language
Set the date and time
Set the timer to turn off the display after an assigned period of inactivity
Enter the network settings
Assign a password that secures access to the monitor settings and unlocks the monitor, if
desired
NOTE: You can modify the settings that were entered in the Startup Wizard any time by clicking the
Settings icon on the Net mode Home page. For more information on the settings in the Startup
After completing the Startup Wizard, the Net mode Home page will be displayed.
14 Chapter 2 Setting Up the Monitor
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Using the Net Mode Interface
The Net mode Home page is displayed when the monitor is powered on. Click on one of the icons to
use that feature of the Internet monitor.
NOTE: The user interface and features in this chapter are only available when the monitor is in Net
mode.
Figure 3-1 Net Mode Home Page
NOTE: The Net mode modules listed below are independent applications that cannot be run
simultaneously. For example, if you are listening to music in the Music module and switch to the
Browser module, the music session will end.
Music
Click this icon to listen to music stored on a media device.
Click this icon to watch videos stored on a media device.
Click this icon to browse the Internet.
Video
Browser
Photo
Click this icon to view photographs stored on a media device.
ENWW
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Home
Click this icon to adjust the monitor settings.
This icon is displayed in the lower left corner of the screen when you are not at the
Home page. You can click the Home icon at any time to return to the Home page.
NOTE: When you return to the Home page any Net mode application you were
running will close (Video, Browser, Music, Photo).
Browsing the Internet
The monitor uses the Firefox web browser to browse the Internet and includes support for Adobe
Flash and HTML5. You must have Internet access to browse the Internet (not provided).
To browse the Internet:
1. Ensure that you have a live Ethernet cable (not provided) plugged into the monitor.
2. Click the Browser icon on the Net mode Home page.
3. If you are in an environment with a firewall, you must manually enter an HTTP proxy
configuration to use the browser. On the browser toolbar, go to Edit > Preferences > Advanced
> Network > Settings > Manual Proxy Configuration, enter the information provided by your
IT support and click the OK button to apply.
4. Use the browser to browse the Internet.
To change your browser's landing page:
1. Go the website that you would like to become your landing page.
2. Using the browser controls, go to Edit and then select Preferences.
3. In the new page that appears, the first part is Startup. Under Startup, use the drop-down arrow
to select Show my home page. Then click the Use Current Page button under the Home Page
section.
Listening to Music
You can use the music player to listen to music that you have stored on a USB flash media device or
media card.
NOTE: The audio file name and the folder(s) name can be any length but cannot include special
characters or spaces in order for the file manager to recognize the audio file.
To listen to music:
1. Click the Music icon on the Net mode Home page.
2. Insert the media device into the 4-in-1 media card reader or a USB port on the monitor.
16 Chapter 3 Using the Net Mode Interface
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
3. In the Music module, select the media device that you inserted, navigate to the desired music file
and click on it.
NOTE: If a photos folder was selected in the Slide Show options section of the Settings
module, a slide show of the selected photos will be displayed while the music is playing (refer to
Slide Show Options on page 19 to configure a slide show). If you do not want to view a slide
show of photos while playing music, make sure that no folder is selected in the Slide Show
options section of the Settings module.
4. Use the controls at the bottom of the slide show player to stop, start, or pause the slide show
and adjust volume levels.
5.
To return to the navigation folder where your music is stored, click
show player.
at the bottom of the slide
The following audio formats are supported and will be displayed:
●
●
●
MP3
AAC
WMA
Watching Videos
You can use the video player to watch videos that you have stored on a USB flash media device or
media card.
NOTE: The video file name and the folder(s) name can be any length but cannot include special
characters or spaces in order for the file manager to recognize the video file.
To watch a video:
1. Click the Video icon on the Net mode Home page.
2. Insert the media device into the 4-in-1 media card reader or a USB port on the monitor.
3. In the Video module, select the media device that you inserted, navigate to the desired video file
and click on it. The video will begin playing.
4. Use the controls at the bottom of the video player to stop, start, or pause the video and adjust
volume levels.
5.
To return to the navigation folder where your video is stored, click
player.
at the bottom of the video
The following video formats are supported and will be displayed:
●
●
●
MPEG4 H.263
MPEG4 H.264
MPEG2 VC1
ENWW
Watching Videos 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Photographs
You can use the photograph viewer to view photographs that you have stored on a USB flash media
device or media card.
NOTE: The photo file name and the folder(s) name can be any length but cannot include special
characters or spaces in order for the file manager to recognize the photo file.
To view photographs:
1. Click the Photo icon on the Net mode Home page.
2. Insert the media device into the 4-in-1 media card reader or a USB port on the monitor.
3. In the Photo module, select the media device that you inserted, navigate to the desired photo file
and click on it. The photograph will be displayed.
4. Use the controls at the bottom of the video player to go to the next or previous photograph,
rotate the photograph or run a slide show of the photographs. The slide show will display all the
photographs you have stored in the same media device folder.
NOTE: To run a slide show of photos while playing music, configure the slide show in the Slide
within the Photo module.
5.
To return to the navigation folder where your photographs are stored, click
the bottom of the slide show player.
at the bottom at
The following picture formats are supported and will be displayed:
●
●
●
●
JPEG
GIF
PNG
BMP
18 Chapter 3 Using the Net Mode Interface
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Settings
To configure the settings, click the Settings icon on the Net mode Home page.
The Settings module includes five tabs for configuring and adjusting the settings:
●
●
●
●
●
Slide Show Options:Sets up and customize a music and photograph slide show.
Network: Configures the monitor’s network connection.
Date/Time: Sets the monitor’s date and time.
Language: Selects a language for the monitor.
System: Returns all settings to their factory default values, sets the timer, updates the software,
locks the monitor, and enables or disables fast boot.
●
Password: Sets a password required to access the Settings module and unlock the monitor.
Slide Show Options
The Slide Show Options allow you to select photos that will be displayed during all music playback.
To configure a slide show of photos during all music playback:
1. Select the Slide Show Options tab in the Settings module.
2. In the Select Photos for Display during Music playback section, click the folder icon and
navigate to the folder with photos that you want to run as a slide show while playing music.
3. In the Slide Show Photo Settings section, select an effect of how the photographs transition
from one photograph to another in the slide show.
4. In the Slide Show Photo Settings section, select a time period to display each of the
photographs in the slide show.
5. Click the Apply button to save the configuration.
After the slide show is configured, the slide show of photos that you selected will run when you play
Network Settings
The Network settings allow you to configure the network connection.
To configure the network settings:
1. Select the Network tab in the Settings module.
2. Click the Auto button in the Wizard section and follow the instructions on the screen, or click the
Manual button to enter the information manually then click the Apply button.
ENWW
Adjusting the Settings 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Date/Time Settings
The Date/Time settings allow you to set the date and time for the monitor.
To set the date and time:
1. Select the Date/Time tab in the Settings module.
2. Select your time zone to automatically set the date and time or click the Manual button and
manually set the date and time.
3. Click the Apply button to save the settings.
Language Settings
The Language settings allow you to select a language for the monitor.
To select a language:
1. Select the Language tab in the Settings module.
2. Select a language.
3. Click the Apply button to save the settings.
System Settings
The System settings allow you to return all settings to the factory default values, set the monitor’s
timer to put the display in standby mode after a designated period of inactivity, update the software,
lock the monitor's screen, and enable or disable the fast boot feature.
To return all settings to the factory default values:
1. Select the System tab in the Settings module.
2. Click the Set Default Value button.
3. Click the Apply button to save the settings.
To set the timer so that the monitor goes into standby mode after a designated period of
inactivity:
1. Select the System tab in the Settings module.
2. In the Turn Off the Display section, adjust the hours and/or minutes to transpire before the
display automatically goes into standby mode if there is no activity detected. You can also select
the Never button to disable the timer. The monitor will return to full power if it detects mouse or
keyboard activity.
3. Click the Apply button to save the timer’s settings.
To update the software:
20 Chapter 3 Using the Net Mode Interface
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: The monitor must be connected to the Internet to update the software. Internet access is not
provided. Contact your local Broadband supplier.
1. Select the System tab in the Settings module.
2. In the Software Version section, click the Update Now button or click the Auto Update button
and adjust the number of days to transpire before the software is automatically updated.
3. Click the Apply button to save the software update settings.
To lock the monitor's screen and restrict access to your current session without a password
(after a password is set up):
1. Select the System tab in the Settings module.
2. Click the Lock Screen button.
3. To unlock the monitor's screen, enter your password and click the Done button. For more
To enable or disable the fast boot feature:
1. Select the System tab in the Settings module.
2. In the Fast Boot section, click either the Disable or Enable button.
3. Click the Apply button to save the fast boot settings.
NOTE: When Fast Boot is enabled, the monitor will resume from standby within seconds. Fast
Boot must be disabled to meet Energy Star qualification.
Password Settings
The Password settings allow you to create a password that is required to access the Settings module
and unlock the monitor's screen if it has been locked.
To set a password:
1. Select the Password tab in the Settings module.
2. Click the On button (or click the Off button if you do not want access to the Settings module to
require a password or if you do not want a password required to unlock the monitor's screen).
3. Enter your password in the Password text box. The password must be 6 to 10 characters and is
not case sensitive. Special characters are allowed but spaces are not allowed.
4. Enter your password again in the Verify Password text box.
5. Click the Apply button to save the settings.
To change your password:
1. Select the Password tab in the Settings module.
2. Ensure that the On button is selected.
3. Enter your new password in the Password text box. The password must be 6 to 10 characters
and is not case sensitive. Special characters are allowed but spaces are not allowed.
ENWW
Adjusting the Settings 21
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Enter your new password again in the Verify Password text box.
5. Click the Apply button to save the settings.
To cancel a password:
1. Select the Password tab in the Settings module.
2. Click the Off button. A password will not be required to access the Settings module or unlock the
monitor's screen
3. Click the Apply button to save the settings.
If you forgot your password and need to reset all settings to the default values:
NOTE: The only way to access the Settings module and unlock the monitor's screen if you have
forgotten your password is to reset all Settings to the default values. The default setting for the
password is Off.
1. Turn the power off.
2. Press and hold down the Menu button and the – (Minus) button on the monitor's front panel at
the same time, then press the power button to turn on the monitor.
3. Continue holding down the Menu button and the – (Minus) button for 10 seconds.
4. Reset the password and reconfigure the other settings as necessary.
Printing in Net Mode
Standard print functionality in Net mode is not supported. However, convenience printing may be
supported via HP ePrint.
NOTE: HP ePrint provides convenience printing, and documents printed with ePrint may appear
different from the original. Style, formatting and text flow may differ slightly from the original
document. For documents requiring a higher quality (such as legal documents), HP recommends that
you print from the software application on your computer where you will have more control over how
your printouts appear.
Introducing ePrint
HP ePrint lets you print from virtually anywhere to an HP printer that supports ePrint. Once enabled,
ePrint assigns an email address to your printer. To print, simply send an email containing your
document to your printer’s address. For more information, visit http://www.hp.com/go/ePrintCenter for
compatibility and details.
22 Chapter 3 Using the Net Mode Interface
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Finding More Information
information on:
●
●
●
●
●
Optimizing monitor performance
Safety and maintenance guidelines
Agency regulatory and environmental notices
Using the OSD menu
Downloading additional software from the Web for PC mode.
Select your country or region, select Product Support & Troubleshooting, and then enter your monitor
model in the SEARCH window.
The VGA cable, USB upstream cable, audio cable, Ethernet cable, and Internet access are not
provided.
ENWW
23
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Technical Specifications
NOTE: All specifications represent the typical specifications provided by HP's component
manufacturers; actual performance may vary either higher or lower. Specifications are subject to
change. The complete and latest specifications on display products are available on
1912nm and 1912nc Models
Table 5-1 1912nm and 1912nc Specifications
Maximum Weight (Unpacked)
Dimensions (include base)
Height
3.65 kg
8.05 lbs
34.8 cm
13.7 inches
7.09 inches
17.64 inches
18.0 cm
Depth
44.8 cm
Width
Maximum Graphic Resolution
Optimum Graphic Resolution
Power Source
1366 × 768 (60 Hz)
1366 × 768 (60 Hz)
100 – 240 VAC 50/60 Hz
Graphics Input Terminal
One VGA connector for PC mode (cable
not included)
ARM based Processor
IT OMAP4430 ARM Cortex-A9 1.0 GHz
Dual Core
Flash RAM Memory
DDR II Memory
2GB
1G
USB 2.0 ports
1 upstream + 5 downstream
USB 2.0 Storage Devices
USB Keyboard and Mouse (Provided)
Line In + Line Out
Supported USB Devices
Audio
HID
USB Keyboard + USB Mouse
Custom HP Linux Kernal 2.6.35
HP Easy Update Manager
Firefox v4.0
Operating System
Image / Component Updates
Internet Solution (Browser)
24 Chapter 5 Technical Specifications
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 5-1 1912nm and 1912nc Specifications (continued)
Video Player
Audio Player
Photo Frame
Video Codecs
Video Container
Support
Support
Support
H.264, H.263, MPEG2, MPEG4, VC-1
MP4, M4V, MPG, MKV, WMV, AVI,
MOV, ASF, 3GP, VOB
Audio Codecs
MP3, AACLC, HE-ACC, WMA10 std,
WMA Pro, WMA9 Lossless
Audio Container
MP1, MP2, MP3, AAC, M4A, WMA, ASF
JPEG, PNG, GIF, BMP
Picture Codecs (2048 x 1536 3M max)
Productivity - Document Handler
Adobe Flash (720P)
Box.net / Google Docs
Adobe Flash 10.1
External Input Devices
4-in-1 Card Reader (for SD, MMC, MS,
xD) and USB (2.0) Thumb Drive
For a list of recommended USB and card reader storage devices consult the 1912nm Quickspecs.
NOTE: HP recommends that the storage device is formatted FAT16/32.
ENWW
1912nm and 1912nc Models 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recognizing Preset Display Resolutions
The display resolutions listed below are the most commonly used modes and are set as factory
defaults. This monitor automatically recognizes these preset modes and they will appear properly
sized and centered on the screen.
NOTE: The preset modes can only be adjusted if the monitor is in PC mode. In Net mode, the
preset is locked at 1366 x 768 at 60Hz and cannot be adjusted.
1912nm and 1912nc Models (PC Mode)
Table 5-2 Factory Preset Modes
Preset Pixel Format
Horz Freq (kHz)
31.47
Vert Freq (Hz)
59.94
1
2
3
4
5
6
7
8
640 × 480
720 × 400
800 × 600
1024 × 768
1280 × 720
1280 × 960
1280 × 1024
1366 × 768
31.47
70.09
37.88
60.32
48.36
60.00
45.0
60.0
60.0
60.0
63.98
60.02
47.71
59.79
Table 5-3 High Definition Video Formats
Preset Timing Name
Pixel Format
720 × 480
Horz Freq (kHz)
Vert Freq (Hz)
1
2
3
4
480p
31.469
31.25
37.5
60
50
50
60
576p
720 × 576
720p50
720p60
1280 × 720
1280 × 720
45
Entering User Modes
The video controller signal may occasionally call for a mode that is not preset if:
●
●
You are not using a standard graphics adapter.
You are not using a preset mode.
It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen
display. Your changes can be made to any or all of these modes and saved in memory. The monitor
automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In
addition to the factory preset modes, there are at least 10 user modes that can be entered and
stored.
26 Chapter 5 Technical Specifications
ENWW
Download from Www.Somanuals.com. All Manuals Search And Download.
Energy Saver Feature
The monitors support a reduced power state. The reduced power state will be entered into if the
monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon
detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and
the power light is turned amber. When the monitor is in the reduced power state, the monitor will
utilize less than one watt of power. There is a brief warm up period before the monitor will return to its
normal operating mode.
Refer to the computer manual for instructions on setting energy saver features (sometimes called
power management features).
NOTE: The above power saver feature only works when connected to computers that have energy
saver features.
By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor to
enter into the reduced power state at a predetermined time. When the monitor's Energy Saver utility
causes the monitor to enter the reduced power state, the power light blinks amber.
ENWW
Energy Saver Feature 27
Download from Www.Somanuals.com. All Manuals Search And Download.
|