HP Hewlett Packard Car Video System D5063 User Manual

Important Safety Instructions  
What the f50 Monitor Offers  
What the f70 Monitor Offers  
Unpacking the Monitor  
Setting Up the Monitor  
How to Install the Drivers  
D5063/D5064  
Using the Monitor  
LCD Monitor Quality and  
Pixel Policy for f50 Monitor  
(15-inch/17-inch Viewable Image)  
LCD Monitor Quality and Pixel  
Policy for f70 Monitor  
User’s Guide  
Technical Specifications for the  
f50 Monitor  
Technical Specifications for the  
HP f70 Audio System  
Performance Specifications  
Care and Cleaning  
Environmental Information  
Regulatory Information  
X
Download from Www.Somuals.cAll Maals Seh And Download.  
hp pavilion f50/f70 LCD Monitor  
f50 15-inch LCD Monitor  
f70 17-inch LCD Monitor  
hp pavilion f50/f70  
D5063/D5064  
15-inch/17-inch  
LCD Monitor  
(15-inch/17-inch Viewable Image)  
User’s Guide  
3
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Important Safety Instructions  
Important Safety Instructions  
CAUTION:  
The lightning flash with arrowhead symbol  
inside an equilateral triangle is intended to alert  
the user to the presence of uninsulated,  
dangerous voltage which may be of sufficient  
magnitude to constitute a risk of electric shock.  
WARNING:  
The exclamation point within an equilateral  
triangle is intended to alert the user to the  
presence of important operating and servicing  
instructions in the literature accompanying the  
appliance.  
!
WARNING:  
WARNING:  
If you are unsure that you can lift the equipment  
safely, do not try to move it without help.  
!
!
Before you connect any cables or install the HP  
monitor, refer to the above safety instructions.  
Also, refer to the set up poster and the  
documentation included with the PC and the  
video adapter to ensure this equipment is  
correctly installed.  
WARNING:  
For your safety, always connect equipment to a  
grounded wall outlet. Always use a power cord  
with a properly grounded plug, such as the one  
provided with the equipment, or one in  
compliance with your national safety standards.  
This equipment can be disconnected from the  
power by removing the power cord from the  
power outlet. This means the equipment must be  
located close to an easily accessible power  
outlet.  
!
4
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
Important Safety Instructions  
WARNING:  
Use the monitor with the power adapter  
supplied with your HP monitor only.  
!
To avoid electrical shock, do not open the  
monitor cover or the power adapter. There are  
no user-serviceable parts inside. Only qualified  
service personnel should service these parts.  
Make sure the computer is turned off before  
connecting or disconnecting a display  
peripheral.  
Working in Comfort  
Thank you for selecting HP monitor equipment.  
To optimize your comfort and productivity, it’s important that you set  
up your work area correctly and use your HP equipment properly.  
With that in mind, we have developed some setup and use  
recommendations based on established ergonomic principles for you  
to follow.  
These recommendations can be found in the online version of the  
Working in Comfort guide, which is preloaded on the hard disk of  
your HP computer. They can also be found on the HP Working in  
Comfort Web site at http://www.hp.com/ergo/ along with other  
information.  
5
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
What the f50 Monitor Offers  
What the f50 Monitor Offers  
Slim and space  
saving  
Anti-glare  
surface  
Full scan TFT screen  
that gives an  
edge-to-edge image  
On/Off switch  
Power status  
indicator  
Menu button  
Browse buttons  
Auto/Select button  
The HP f50 monitor is a liquid crystal display (LCD) 15-inch, high  
resolution, multi-synchronous color monitor. Multi-synchronous means  
that the monitor can be used with a range of video modes. It is  
optimized for use with all HP computers.  
The HP f50 monitor has the following features:  
• A 15-inch LCD; thin film transistor (TFT) with an anti-glare surface  
• Support of video modes up to 1024 x 768 at a 75 Hz refresh rate  
• Analog/Digital interface: a VGA (analog) and a DVI-D (digital)  
connector enables connection to two computers at the same time  
(optional)  
• True color (16 million colors)  
• Auto-adjustment of display position, clock, and phase for the VGA  
interface  
• An onscreen display (OSD) manager that allows you to adjust all  
settings through onscreen menus  
6
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
What the f50 Monitor Offers  
1
• Power-management system (VESA standard) controlled from  
suitably equipped HP computers to automatically reduce the  
power consumption of the monitor  
NOTE: As an ENERGY STAR partner, HP has determined that this  
product meets ENERGY STAR guidelines for energy  
efficiency.  
• Low power consumption: 36 W maximum  
• Compliance with stringent Swedish Low Emissions guidelines  
TCO '99  
• Plug and Play capability (compliant with VESA DDC standard,  
version 3, revision 1 at the levels DDCI, DDC/2B, DDC/C1,  
version 1) that enables the monitor to identify itself to suitably  
equipped HP computers  
1.  
VESA is the Video Electronics Standards Association.  
7
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
What the f70 Monitor Offers  
What the f70 Monitor Offers  
Slim and space  
saving  
Full scan TFT screen  
that gives an  
edge-to-edge image  
Anti-glare  
surface  
On/Off switch  
LCD module  
power status  
indicator  
Menu button  
Browse buttons  
Auto/Select button  
Headphone  
connector  
Audio base with  
stereo speakers  
Microphone  
connector  
Audio base power  
status indicator  
Volume control  
The HP f70 monitor is a liquid crystal display (LCD) 17-inch, high  
resolution, multi-synchronous color monitor. Multi-synchronous means  
that the monitor can be used with a range of video modes. It is  
optimized for use with all HP computers.  
8
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
What the f70 Monitor Offers  
The HP f70 monitor has the following features:  
• A 17-inch LCD; thin film transistor (TFT) with an anti-glare surface  
• Support of video modes up to 1280 x 1024 at a 75 Hz  
refresh rate  
• Analog/Digital interface: a VGA (analog) and a DVI-D (digital)  
connector enables connection to two computers at the same time  
(optional)  
• True color (16.7 million colors)  
• Auto-adjustment of display position, clock, and phase for the VGA  
interface  
• Audio base with Polk Audio active stereo speakers  
• All-in-one audio and microphone cable  
• An onscreen display (OSD) manager that allows you to adjust all  
settings through onscreen menus  
2
• Power-management system (VESA standard) controlled from  
suitably equipped HP computers to automatically reduce the  
power consumption of the monitor  
NOTE: As an ENERGY STAR partner, HP has determined that this  
product meets ENERGY STAR guidelines for energy  
efficiency.  
• Plug and Play capability (compliant with VESA DDC standard,  
version 3, revision 1 at the levels DDCI, DDC/2B, DDC/C1,  
version 1) that enables the monitor to identify itself to suitably  
equipped HP computers  
• Slot for security lock  
2.  
VESA is the Video Electronics Standards Association.  
X
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Unpacking the Monitor  
Unpacking the Monitor  
Check for the following items. If they are missing or damaged,  
consult your retailer immediately.  
• 1 liquid crystal display (LCD)  
• 1 power cord  
• 1 DC adapter with an attached DC cable  
• 1 video cable (VGA)  
• 1 video cable (DVI-D) (select models only)  
• 1 Quick User’s Guide  
• 1 warranty booklet  
• 1 CD-ROM disc  
10  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
Setting Up the Monitor  
Setting Up the Monitor  
Place the monitor on a flat, sturdy surface. Ensure that the operating  
site is free from excessive heat and moisture. For best performance,  
make sure nothing is resting on the monitor.  
WARNING:  
Before you connect any cables or install the HP  
monitor, refer to the safety instructions at the  
beginning of this manual. Refer also to the  
documentation that came with the computer to  
ensure this equipment is correctly installed.  
!
Connecting two computers to the monitor  
The LCD monitor has two video signal connectors on the rear panel:  
one analog (VGA) and one digital (DVI-D). This allows you to  
connect the monitor to two computers at the same time.  
Video  
connectors  
VGA  
DVI  
When two computers are connected, you need to use the Input  
Priority setting on the onscreen display (OSD) to switch from one  
video signal to the other. See “Input Priority” on page 33. The LCD  
must be set to one signal or the other to operate properly.  
11  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
Setting Up the Monitor  
Connecting the cables to the f50 monitor  
Look at the following diagram and follow the steps listed below to  
connect the cables to the f50 15-inch LCD monitor.  
Video  
connectors  
DVI VGA  
DC adapter  
with attached DC cable  
Power  
cord  
Video cable  
(VGA)  
Power  
source  
CAUTION:  
This monitor is equipped with an auto-sensing  
power supply for voltage ranges 100—240 V~,  
50/60 Hz. Use the monitor with the supplied DC  
adapter only.  
12  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Setting Up the Monitor  
To connect the cables to the f50 monitor:  
1 Make sure the computer is turned off.  
2 Plug the video cable into the correct video connector (VGA or  
DVI-D) on the back of the monitor and into the corresponding video  
connector on the computer. Secure the cable by tightening the  
thumbscrews.  
VGA cable →  
DVI-D cable →  
VGA connector  
DVI-D connector  
NOTE: The f50 monitor comes with both a VGA and a DVI-D  
connector. Some models come with a VGA cable, and  
others come with a DVI-D cable as well. Using both video  
connectors, you can connect this monitor to two computers  
at the same time. You may need to purchase the DVI-D  
cable.  
3 Plug the DC adapter cable into the connector on the back of the  
monitor.  
4 Plug the power cord into the DC adapter and into the main power  
source.  
5 Turn on the main power source (for example, a surge protector),  
and then turn on the power switch for both the computer and the  
monitor.  
To disconnect the cables from the f50 monitor:  
1 Turn off the power switch for the monitor and the computer and  
then turn off the main power source.  
2 Disconnect the power cord from the main power source and from  
the DC adapter cable.  
3 Disconnect the DC adapter cable from the connector at the back  
of the monitor.  
4 Unscrew the thumbscrews on the video cable(s) and disconnect the  
video cable(s).  
13  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Setting Up the Monitor  
Connecting the cables to the f70 monitor  
Look at the following diagram and follow the steps listed below to  
connect the cables to the f70 17-inch LCD monitor.  
CAUTION:  
This monitor is equipped with an auto-sensing  
power supply for voltage ranges 100—240 V~,  
50/60 Hz. Use the monitor with the supplied DC  
adapter only.  
DC In  
cable  
Video  
connectors  
DVI  
VGA  
Volume  
control  
Video cable  
(VGA)  
Microphone  
(pink)  
Audio  
cable  
DC adapter  
with attached DC cable  
Audio out  
(green)  
OR  
Power  
cord  
Power  
source  
To connect the cables to the f70 monitor:  
1 Make sure the computer is turned off.  
2 Plug the video cable into the correct video connector (VGA or  
DVI-D) on the back of the monitor and into the corresponding video  
connector on the computer. Secure the cable by tightening the  
thumbscrews.  
VGA cable →  
DVI-D cable →  
VGA connector  
DVI-D connector  
14  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
Setting Up the Monitor  
NOTE: The f70 monitor comes with both a VGA and a DVI-D  
connector. Some models come with a VGA cable, and  
others come with a DVI-D cable as well. Using both video  
connectors, you can connect this monitor to two computers  
at the same time. You may need to purchase the DVI-D  
cable.  
3 Plug the audio cable into the correct connectors on the computer.  
Connect the green plug to the Audio Out connector and the pink  
plug to the Microphone connector on the computer.  
green Audio Out connector  
pink Microphone connector  
Speaker Out connector  
CAUTION:  
Do not connect the audio cable to the Speaker  
Out connector on the computer: the audio  
system of the monitor could be damaged. The  
audio cable must be connected to the Audio Out  
connector. HP recommends you keep the audio  
cable connected to the Audio Out connector on  
the computer at all times when using the f70  
monitor.  
4 Plug the DC adapter cable into the connector at the rear of the  
monitor base.  
5 Plug the power cord into the DC adapter.  
6 Make sure the DC In cable is connected from the back of the  
monitor column to the back of the LCD panel. This cable should  
always be connected.  
7 Make sure the volume is turned to the minimum setting on both the  
audio base and on the keyboard (if the keyboard has a volume  
control feature).  
15  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Setting Up the Monitor  
NOTE: For the best performance and sound range of the f70  
monitor, use the keyboard for the primary volume control  
and use the audio base as a secondary volume control.  
8 Turn on the main power source (for example, a surge protector),  
and then turn on the power switch for both the computer and the  
monitor.  
NOTE: The audio base is always on when the monitor is connected  
to a power source, even when the computer and the LCD  
panel are turned off. To see if the monitor is receiving  
power, check the power status indicator (LED) on the side of  
the audio base and check the light indicator on the front of  
the LCD panel.  
To disconnect the cables to the f70 monitor:  
1 Turn off the power switch for the monitor and the computer, and  
then turn off the main power source.  
2 Disconnect the power cord from the main power source and the  
DC adapter cable.  
3 Disconnect the DC adapter cable from the connector at the rear of  
the monitor base.  
4 Disconnect the audio cable from the computer connectors.  
5 Unscrew the thumbscrews on the video cable(s) and disconnect the  
video cable(s).  
Connecting the speakers to the f70 monitor  
The f70 monitor comes with two built-in stereo speakers in the audio  
base. If you bought the monitor with an HP Pavilion home PC, you  
will have two sets of speakers: an external set shipped with the  
computer, and a built-in set that is part of the monitor.  
The external speakers of the computer connect to a Speaker Out  
connector identified on the set up poster for the computer. These  
speakers will provide the best sound for most HP Pavilions.  
If you want to use the built-in monitor speakers, you must connect  
them to a Line Out or an Audio Out connector on the back of the  
computer. Use the audio cable provided for connecting the built-in  
monitor speakers and the microphone to the computer; see step 3 in  
“Connecting the cables to the f70 monitor” on page 14.  
16  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Setting Up the Monitor  
If the computer does not have a Line Out or Audio Out connector,  
you can purchase a sound card with a Line Out connector to use the  
internal monitor speakers.  
If you are not sure which connector you have and the sound quality  
is poor, make sure the external PC speakers are connected to the  
Speaker Out connector and not the Audio Out connector. Make sure  
the audio cable from the monitor is not connected to the Speaker Out  
connector on the computer.  
Securing the f70 monitor  
The f70 monitor can be secured to a desk or to any other fixed  
object, using a Kensington lock security cable. The cable can be  
attached to a slot located on the rear of the monitor.  
NOTE: The Kensington lock is not an HP accessory. It cannot be  
ordered from HP. Contact your retailer for more  
information.  
Slot for lock  
To secure the monitor:  
1 Insert the lock in the slot located on the rear of the monitor.  
2 Turn the key to lock the cable to the monitor.  
3 Remove the key and store it in a safe place.  
17  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Setting Up the Monitor  
Connecting additional devices to the f70 monitor  
The following diagram shows additional devices that can be  
connected to the monitor. On the side of the audio base, the f70  
monitor has one headphone connector and one microphone  
connnector. You can use these connectors to connect various  
compatible devices.  
Headphone connector  
Microphone connector  
Headphone  
connector  
Microphone  
connector  
18  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
How to Install the Drivers  
How to Install the Drivers  
The HP monitor comes with driver software that allows you to take  
®
advantage of the Plug and Play feature of the Windows Me,  
Windows 2000, or Windows XP operating system. This software  
enables the computer to communicate with the monitor and use all  
the monitor features. Without this software, the monitor settings and  
display images will not be correct.  
NOTE: HP computers may ship with the Plug and Play drivers  
preinstalled. If you have an older computer, these drivers  
may not be preinstalled and you may need to install the  
drivers from the CD-ROM disc that came with the monitor.  
You can also download the latest version of a driver from the  
HP Monitors Support Web site at:  
Windows 2000 Users  
NOTE: The procedure for installing the driver for your operating  
system may vary.  
To install the driver for the f50 or f70 monitor:  
1 Click Start, select Settings, and then click Control Panel.  
2 Double-click Display.  
3 Click the Settings tab.  
4 Click Advanced Properties or Advanced, and select the  
Monitor tab.  
5 Click Properties.  
6 Click the Driver tab.  
7 Click Update Driver and click Next.  
8 Select the recommended option and then click Next.  
9 Select the Specify a Location box.  
10 Find and open the f50.inf (f50 15-inch) or the f70.inf (f70  
17-inch) file on the CD-ROM disc in the Drivers directory, and  
click OK.  
11 Click Next to install the selected monitor.  
19  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
How to Install the Drivers  
Windows Me Users  
NOTE: The procedure for installing the driver for your operating  
system may vary.  
To install the driver for the f50 or f70 monitor:  
1 Click Start, select Settings, and then click Control Panel.  
2 Click Display.  
3 Select the Settings tab.  
4 Click the Advanced button.  
5 Select the Monitor tab.  
6 Click the Change button.  
7 Select the Specify a Location box.  
8 Find and open the f50.inf (f50 15-inch) or the f70.inf (f70  
17-inch) file on the CD-ROM disc in the Drivers directory, and  
click OK.  
9 Click Next to install the selected monitor.  
Windows XP Users  
NOTE: The procedure for installing the driver for your operating  
system may vary.  
To install the driver for the f50 or f70 monitor:  
1 Click Start.  
2 Click Control Panel.  
3 Click Appearance and Themes.  
4 Click Display.  
5 Select the Settings tab.  
6 Click the Advanced button.  
7 Select the Monitor tab.  
8 Click Properties.  
9 Select the Driver tab.  
10 Click Update Driver and click Next.  
11 Select the recommended option and then click Next.  
12 Select the Specify a Location box.  
20  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
How to Install the Drivers  
13 Find and open the f50.inf (f50 15-inch) or the f70.inf (f70  
17-inch) file on the CD-ROM disc in the Drivers directory, and  
click OK.  
14 Click Next to install the selected monitor.  
If the installation procedure of the monitor driver for the  
Windows 2000, Windows Me, or Windows XP operating system is  
different, or if you need more detailed installation information,  
please refer to the Microsoft Windows information that came with the  
computer.  
21  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Adjusting the Monitor  
Adjusting the Monitor  
The monitor display has several adjustable settings which may need  
to be fine-tuned occasionally. Adjust the monitor:  
When the monitor is installed for the first time.  
If the resolution (number of pixels on the display) or refresh rate  
(vertical scan frequency rate) has been changed.  
If the graphic card has been changed.  
If the monitor is connected to a different computer.  
After using the Mode Recall function. See To use Mode Recallon  
page 31.  
NOTE: For best performance, it is recommended that you select a  
video mode of 1024 x 768 @ 60 Hz for the f50 monitor  
and 1280 x 1024 @ 60 Hz for the f70 monitor on the  
computer.  
Using the monitor controls  
There are five controls for the f50 monitor and six controls for the  
f70 monitor that perform the following operations:  
Menu  
Left Browse/  
Brightness  
Right Browse/  
Contrast  
Auto/Select  
Volume  
On/Off  
(f70 only)  
NOTE: The volume control is available only on the f70 monitor.  
22  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
Adjusting the Monitor  
Monitor control buttons  
Control  
button/icon  
Function when not in  
Display Manager  
Function in  
Display Manager  
Menu: Opens and closes the Closes setting screens  
Display Manager window  
and exits Display  
Manager  
Left Browse/Brightness: Navigates through  
Shortcut to Brightness setting  
screen  
setting option icons and  
adjusts settings  
Right Browse/Contrast:  
Shortcut to Contrast setting  
screen  
Navigates through  
setting option icons and  
adjusts settings  
Auto/Select: Performs an  
auto-adjustment which will  
optimize the image quality  
Acts as an Enter (Select)  
key to select setting  
screen options  
On/Off  
On/Off: Turns the monitor  
on or off  
Turns the monitor on  
or off  
Volume control Volume control*: Adjusts  
Adjusts volume setting  
volume setting (f70 only)  
*NOTE: For the best performance and sound range of the f70  
monitor, use the keyboard for the primary volume control  
and use the audio base as a secondary volume control.  
Auto-Adjustment function  
You can easily optimize the screen performance for the VGA  
interface by using the Auto button and the auto-adjustment pattern on  
the CD-ROM disc provided.  
1 Insert the provided CD-ROM disc into the computer. Run the  
program D:\F50.exe or D:\F70.exe to display a pattern used for  
setup.  
2 Press the Auto button to produce a stable, centered image.  
The optimizer utility on the CD-ROM contains the drivers for  
Windows Me, Windows 2000, or Windows XP. For the f50  
monitor, use the D:\Drivers\f50.inf file. For the f70 monitor, use the  
D:\Drivers\f70.inf file.  
23  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
Using the Monitor  
Using the Monitor  
Using Display Manager  
The monitor comes pre-configured to provide the best viewing  
image. However, you can fine-tune the display using Display  
Manager. The monitor has control buttons that you can use to open  
Display Manager to select and adjust display settings.  
To adjust display settings:  
1 Press the Menu button to open Display Manager.  
2 Press a Browse button to navigate through the setting option icons;  
see the following setting options table.  
3 When the menu option you want is selected, press the Select  
button to open the setting screen for that option.  
4 Adjust the setting using the onscreen instructions that follow.  
5 To exit Display Manager, press the Menu button.  
Display Manager screen  
in digital mode  
Display Manager screen  
in analog mode  
24  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
hp pavilion f50/f70 LCD Monitor  
Using the Monitor  
Setting Options  
The icons at the top of the Display Manager window represent the  
different setting options, shown in the following table:  
Icon  
Setting option  
Setting description  
Horizontal  
Position*  
Adjusts the horizontal position of the screen  
image.  
Vertical  
Position*  
Adjusts the vertical position of the screen  
image.  
Clock*  
Adjusts the frequency of the pixel clock to  
minimize vertical bars.  
Phase*  
Adjusts the phase value to minimize  
horizontal bars.  
Auto Config*  
Color  
Adjusts the main settings and produces a  
stable, centered image.  
Adjusts the tint of white, and the red, green,  
and blue (RGB) mix for colors.  
Contrast  
Adjusts the difference between the light and  
dark areas.  
Brightness  
Adjusts the brightness.  
OSD Manager  
Adjusts the position, timeout, and notification  
(OSD stands for features of the Display Manager window.  
onscreen  
display)  
Mode Recall  
Resets the display to original factory settings  
for color, brightness, phase, and clock.  
Backlight Info  
Shows the status of the light behind the  
panel.  
Serial Number  
Mode Info  
Shows the serial number of the display.  
Shows the current resolution and refresh rate;  
shows if youre in analog or digital mode;  
and shows how many user settings have  
been adjusted.  
Input Priority  
Languages  
Sets which video input is active: analog or  
digital. Shows status of the video input that is  
active.  
Shows the language of the OSD window.  
25  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Using the Monitor  
*NOTE: Horizontal Position, Vertical Position, Clock, Phase, and  
Auto Config settings do not need to be adjusted for displays  
operating in digital mode; therefore these icons do not  
appear in digital mode.  
Horizontal Position, Vertical Position, Clock, Phase,  
Contrast, or Brightness settings  
To change Horizontal Position, Vertical Position, Clock, Phase,  
Contrast or Brightness settings:  
1 Open the setting screen you want to adjust. See Using Display  
Manageron page 24.  
2 Press the Browse buttons to adjust the setting. The setting is  
automatically saved as you adjust it.  
26  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Using the Monitor  
3 Press the Menu button to exit the setting screen.  
In the Horizontal Position screen, pressing the left Browse button  
moves the horizontal position to the left, and pressing the right  
Browse button moves the horizontal position to the right.  
In the Vertical Position screen, pressing the left Browse button  
moves the vertical position down, and pressing the right Browse  
button moves the vertical position up.  
In the Clock screen, pressing the left Browse button sets the clock  
to an earlier time, and pressing the right Browse button sets the  
clock to a later time.  
In the Phase screen, pressing the left Browse button decreases  
phase setting values, and pressing the right Browse button  
increases phase setting values.  
In the Contrast screen, pressing the left Browse button decreases  
the contrast, and pressing the right Browse button increases the  
contrast.  
In the Brightness screen, pressing the left Browse button  
decreases the brightness, and pressing the right Browse button  
increases the brightness.  
Auto Config settings  
With Auto Config you can reset Horizontal Position, Vertical  
Position, Clock, and Phase to optimize the image quality. When  
using this option, please view a full Windows screen, such as  
Windows Explorer, or use the test pattern provided on the CD before  
pressing the Select button on the Auto Config menu. These test  
pattern files are named F50.exe and F70.exe.  
To change settings with Auto Config:  
1 Open the Auto Config setting screen. See Using Display  
Manageron page 24. A window with a red bar appears.  
27  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Using the Monitor  
2 Press the Select button to proceed with the reset, or press the Menu  
3 If you reset the settings, press the Menu button to exit the setting  
screen.  
Color settings  
To change Color settings:  
Open the Color setting screen. See Using Display Manageron  
page 24. Four options appear: Bluish, White, Reddish, and User.  
Bluish, White, and Reddish refer to tints of white. This setting lets you  
manually adjust the red, green, and blue (RGB) mix for color  
generation.  
To adjust tints of white:  
1 Press the Browse buttons to select a tint of white.  
2 Press the Menu button to save the tint setting and exit the setting  
screen.  
28  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
Using the Monitor  
To adjust User Color:  
1 Press the Browse buttons until User is selected.  
2 Press the Select button to open the User Color window.  
3 Press the Browse buttons to select the color you want to adjust.  
4 Press the Select button to activate the adjustable setting for the  
color.  
5 Press the Browse buttons to change the color value. The value is  
automatically saved as you change it.  
6 Press the Menu key to exit the setting screen.  
After you change a color value, you can reset the values to the  
original factory color settings by selecting Reset and pressing the  
Menu key.  
You can choose to keep the color values as they were before any  
adjustments were made by selecting EXIT WITHOUT SAVE and  
pressing the Menu key.  
29  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Using the Monitor  
OSD settings  
To change OSD settings:  
1 Open the OSD setting screen. See Using Display Manageron  
page 24. Five options appear: Protected OSD, OSD Timeout,  
Inform On/Off, H Position, and V Position.  
2 Press the Browse buttons to select the option you want to adjust.  
3 Press the Select button to display its setting screen.  
NOTE: Protected OSD is not available for use.  
To adjust OSD Timeout:  
You can set the OSD (Display Manager) screen to turn off  
automatically when you are not using it.  
1 Press the Browse buttons to select how long the Display Manager  
screen appears before automatically turning off. The setting is  
automatically saved as you adjust it.  
2 Press the Menu button to exit the setting screen.  
To adjust Inform On/Off:  
Turning Inform on displays the chosen resolution and refresh rate for  
three seconds, whenever you change them. Turning Inform off  
prevents this information from being displayed.  
1 Press the Browse buttons to select On or Off. The setting is  
automatically saved as you adjust it.  
2 Press the Menu button to exit the setting screen.  
30  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Using the Monitor  
To adjust OSD H Position:  
You can adjust the horizontal position of the OSD (Display Manager)  
screen.  
1 Press the Browse buttons to position the OSD screen. The setting is  
automatically saved as you adjust it.  
2 When the screen is in the horizontal position you want, press the  
Menu button to exit the setting screen.  
To adjust OSD V Position:  
You can adjust the vertical position of the OSD (Display Manager)  
screen.  
1 Press the Browse buttons to position the OSD screen. The setting is  
automatically saved as you adjust it.  
2 When the screen is in the vertical position you want, press the  
Menu button to exit the setting screen.  
Mode Recall  
Using Mode Recall restores original factory settings for Color,  
Brightness, Phase, and Clock. This will re-establish default color  
settings for the best possible brightness.  
To use Mode Recall:  
1 Open the Mode Recall setting screen. See Using Display  
Manageron page 24. A window with a red bar appears.  
2 Press the Select button to proceed with Mode Recall, or press the  
Menu button to exit without resetting.  
3 If you reset with Mode Recall, press the Menu button to exit the  
setting screen.  
31  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
Using the Monitor  
Backlight Info  
The Backlight Info window shows the elapsed time of usage for the  
light behind the display screen. The expected lifespan of the  
backlight is approximately 30,000 to 40,000 hours. At some point  
after the maximum usage time of the backlight has been exceeded,  
you may notice a decrease in brightness of up to 50%. At this point,  
the backlight needs to be replaced to restore full brightness.  
CAUTION:  
The backlight can be replaced only by a trained  
technician. Please contact the HP Support Center  
for assistance. Do not attempt to replace the  
light yourself.  
NOTE: Do not use a screen saver with the LCD monitor, as the  
backlight will be used. It is recommended that you enable  
an automatic power saving mode, or switch off the monitor  
when not in use.  
To view Backlight Info:  
1 Open the Backlight Info setting screen. See Using Display  
Manageron page 24. The elapsed time is displayed.  
2 Press the Menu button to exit the setting screen.  
Serial Number  
You may need to provide the display serial number to HP Support  
technicians to help them serve you better during a Support call.  
To view a Serial Number:  
1 Open the Serial Number setting screen. See Using Display  
Manageron page 24. The serial number is displayed.  
2 Press the Menu button to exit the setting screen.  
Mode Info  
The Mode Info screen shows whether the current video input mode is  
analog (1) or digital (2); shows the current resolution and refresh  
rate; and shows how many User settings you have changed, and  
how many preset settings have not been changed.  
32  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Using the Monitor  
To view Mode Info:  
1 Open the Mode Info setting screen. See Using Display Manager”  
on page 24. The Video Input mode, the resolution and refresh rate,  
and the number of Preset and User values are displayed.  
2 Select the Preset or User values with the Browse buttons.  
3 Press the Select button. The Preset or User mode information screen  
is displayed.  
4 Press the Menu button to exit the setting screen.  
Input Priority  
You can use this setting to switch between the two video inputs,  
analog and digital. The default active video input is analog (1). If  
you are connecting a PC to the digital input (2), you need to change  
the input priority in the Input Priority screen.  
NOTE: You only need to set the digital input when you connect two  
PCs to the monitor.  
To set Input Priority:  
1 Open the Mode Info setting screen. See Using Display Manager”  
on page 24.  
2 Press the Browse buttons to switch between Input 1 (analog) and  
Input 2 (digital).  
3 Press the Select button to confirm the new setting. A confirmation  
screen is displayed.  
4 Press the Menu button to exit the setting screen.  
Language of Display Manager  
You can choose to view Display Manager in English, German,  
French, Italian, or Spanish.  
To change the language of Display Manager:  
1 Open the Languages setting screen. See Using Display  
Manageron page 24.  
2 Press the Browse buttons to choose the language you would like.  
The setting is automatically saved.  
3 Press the Menu button to exit the setting screen.  
33  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
Troubleshooting  
Troubleshooting  
If you are having trouble with the monitor, these tips may help you  
solve the problem. Try the following steps before calling HP.  
If you find:  
No picture and the light indicator on the front of the LCD panel is off:  
Check that the monitor is turned on.  
Check that the power cord is properly connected.  
Check the electrical outlet.  
Connect the monitor to another computer to determine if there is a  
problem with the computer rather than with the monitor.  
No picture and the light indicator on the front of the LCD panel is on:  
Check that the computer is turned on.  
Check that the monitor is not in power-saving mode.  
Adjust the Contrast and Brightness through the onscreen display or  
the control buttons.  
Check that the video cable has no bent pins.  
Connect the monitor to another computer to determine if there is a  
problem with the computer rather than the monitor.  
Picture is fuzzy:  
Adjust the monitor using the Auto-Adjustment function. See  
Auto-Adjustment functionon page 23.  
If you are running the Windows Me, Windows 2000, or  
Windows XP operating system, install the Plug and Play driver  
(.inf file). See How to Install the Driverson page 19.  
For the f50 monitor, change the resolution to the recommended  
resolution of 1024 x 768 @ 60 Hz.  
For the f70 monitor, change the resolution to the recommended  
resolution of 1280 x 1024 @ 60 Hz.  
Pixels are missing:  
See LCD Monitor Quality and Pixel Policy for the f50 Monitoron  
page 36.  
See LCD Monitor Quality and Pixel Policy for the f70 Monitoron  
page 37.  
34  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Colors are not pure:  
Check that the video cable has no bent pins and is firmly attached  
to both the computer and monitor video connectors.  
Restore the original factory colors setting. See To use Mode  
Recallon page 31.  
Adjust the RGB (red, green, and blue) colors. See To change  
Color settingson page 28.  
Picture is not centered:  
Adjust the monitor using the Auto-Adjustment function. See  
Auto-Adjustment functionon page 23.  
No sound (f70 monitor only):  
Check to see that the power status indicator (LED) on the side of  
the audio base is turned on.  
Make sure the main power supply is turned on.  
Check to see if the audio cable is plugged in properly.  
Adjust the volume setting on the audio base and the keyboard.  
Make sure the Mute setting on the keyboard and in the Volume  
Controls of the computer is turned off.  
35  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
LCD Monitor Quality and Pixel Policy for f50 Monitor  
LCD Monitor Quality and Pixel Policy for  
f50 Monitor  
f50 15-inch monitor  
The HP f50 TFT monitor uses high-precision technology,  
manufactured according to HP standards, to guarantee trouble-free  
performance. Nevertheless, the display may have cosmetic  
imperfections that appear as small bright or dark spots. This is  
common to all LCD displays used in products supplied by all vendors  
and is not specific to the HP D5063 LCD. These imperfections are  
caused by one or more defective pixels or sub-pixels.  
A pixel consists of one red, one green, and one blue sub-pixel.  
A defective whole pixel is always on (a bright spot on a dark  
background), or it is always off (a dark spot on a bright  
background). The first is the more visible of the two.  
A defective sub-pixel (dot defect) is less visible than a defective  
whole pixel and is small and only visible on a specific  
background.  
The HP D5063 display does not have more than:  
10 total dot defects.  
10 defective full pixels.  
10 defective red sub-pixels.  
4 defective green sub-pixels (green is most visible).  
10 defective blue sub-pixels.  
No more than two adjacent (less than 2.5 mm edge-to-edge) and  
defective pixels.  
No more than two pairs of two adjacent defective pixels.  
To locate defective pixels, the monitor should be viewed under  
normal operating conditions, in normal operating mode at a  
supported resolution and refresh rate, from a distance of  
approximately 50 cm (16 in.).  
HP expects that, over time, the industry will continue to improve its  
ability to produce LCDs with fewer cosmetic imperfections and HP  
will adjust guidelines as improvements are made.  
36  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
LCD Monitor Quality and Pixel Policy for f70 Monitor  
LCD Monitor Quality and Pixel Policy for  
f70 Monitor  
f70 17-inch monitor  
The HP f70 TFT monitor uses high-precision technology,  
manufactured according to HP standards, to guarantee trouble-free  
performance. Nevertheless, the display may have cosmetic  
imperfections that appear as small bright or dark spots. This is  
common to all LCD displays used in products supplied by all vendors  
and is not specific to the HP D5064 displays. These imperfections  
are caused by one or more defective pixels or sub-pixels.  
A pixel consists of one red, one green, and one blue sub-pixel.  
A defective whole pixel is always on (a bright spot on a dark  
background), or it is always off (a dark spot on a bright  
background). The first is the more visible of the two.  
A defective sub-pixel (dot defect) is less visible than a defective  
whole pixel and is small and only visible on a specific  
background.  
The HP D5064 display does not have more than:  
15 total dot defects.  
10 defective full pixels.  
10 defective red sub-pixels.  
4 defective green sub-pixels (green is most visible).  
10 defective blue sub-pixels.  
No more than two adjacent (less than 2.5 mm edge-to-edge) and  
defective pixels.  
No more than two pairs of two adjacent defective pixels.  
To locate defective pixels, the monitor should be viewed under  
normal operating conditions and in normal operating mode at a  
supported resolution and refresh rate, from a distance of  
approximately 50 cm (16 in.).  
HP expects that, over time, the industry will continue to improve its  
ability to produce displays with fewer cosmetic imperfections and HP  
will adjust guidelines as improvements are made.  
X
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
Technical Specifications for the f50 Monitor  
Technical Specifications for the f50 Monitor  
f50 15-inch monitor  
Liquid Crystal  
Display (LCD)  
Display Size  
15-in. (38 cm) diagonal and  
viewable image  
Type  
Video  
Synchronization  
Input Connector  
TFT liquid crystal display  
0.7 V (0,7 V) p-p analog RGB  
Separated H/V (TTL level)  
Analog R, G, B separate H,V  
sync. 15-pin mini D-SUB +  
Digital DVI-D  
Input Signal  
Interface  
Scanning  
Frequency  
Horizontal  
Vertical  
3060 kHz  
5675 Hz  
Max. Resolution 1024 x 768 @ 75 Hz  
(H x V)  
Recommended 1024 x 768 @ 60 Hz  
Resolution  
(H x V)  
Power Source  
AC/DC Adapter  
Input Rating:  
100240 V~, 2 A max  
Output Rating:  
12 V , 4.16 A (4,16 A)  
Frequency: 50/60 Hz  
Power Consumption: less than  
36 W in operating mode  
Operating  
Environment  
Temperature  
Humidity  
5° C to 40° C  
20% RH through 85% RH  
(without condensation)  
Storage  
Environment  
Temperature  
Humidity  
20° C to 60° C  
8% RH through 85% RH  
(without condensation)  
Dimensions  
H x W x D  
With stand: 400 x 365 x 215 mm  
(15.7 x 14.4 x 8.5 in)  
Weight  
With stand: 4.8 Kg (10.6 lbs)  
Tilt Stand  
Tilt Angle: Down 5, up 25 degrees  
38  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
Technical Specifications for the f70 Monitor  
Technical Specifications for the f70 Monitor  
f70 17-inch monitor  
Liquid Crystal  
Display (LCD)  
Display Size  
17-in. (43 cm) diagonal and  
viewable image  
Type  
Video  
TFT liquid crystal display  
0.7 Vp-p analog RGB  
Input Signal  
Interface  
Synchronization  
Input Connector  
Separated H/V (TTL level)  
15-pin D-SUB (Analog)  
DVI-D (Digital)  
Scanning  
Frequency  
Horizontal  
Vertical  
3080 kHz  
5675 Hz  
Max. Resolution 1280 x 1024 @ 75 Hz  
(H x V)  
Recommended  
Resolution  
(H x V)  
1280 x 1024 @ 60 Hz  
Power Source  
AC/DC Adapter  
Input Rating:  
100240 V~, 2 A max  
Output Rating:  
12 V  
, 4.16 A (4,16 A)  
Frequency: 50/60 Hz  
Power Consumption: less  
than 75 W in  
operating mode  
Operating  
Environment  
Temperature  
Humidity  
10° C to 35° C  
20% RH through 80% RH  
(without condensation)  
Storage  
Environment  
Temperature  
Humidity  
10° C to 60° C  
8% RH through 85% RH  
(without condensation)  
Dimensions  
H x W x D  
With standard stand: 468 x 419 x 206 mm  
18.4 x 16.5 x 8.1 in.  
Weight  
Tilt Stand  
With standard stand: 6.1 Kg (13.42 lbs)  
Tilt Angle: Down 5, up 25 degrees  
Security Lock  
Monitor cabinet is provided with a slot allowing the  
use of Kensington lock device  
39  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
HP f70 Audio System Performance Specifications  
HP f70 Audio System Performance Specifications  
Amplifier  
Output power per channel > 3 W @ <5% THD  
Performance into 8 ohm loads, both  
channels driven, 1 kHz, with  
12 V  
regulated supply:  
Signal-to-Noise ratio,  
grounded inputs, maximum  
gain, A-weighted, referred  
to full output:  
> 85dB  
Crosstalk, 22 kHz  
better than 50dB  
bandwidth, 1 kHz, shorted  
inputs, at maximum gain:  
Nominal THD below 2 W, 1 < 0.1% (0,1%)  
kHz, 30 kHz measurement  
bandwidth:  
Sensitivity (input voltage to 400 mV rms @ 1 kHz  
produce full output):  
Input impedance:  
10k  
Storage  
Performance  
Frequency response:  
150 Hz23 kHz, 3 dB @  
230 Hz and 22 kHz  
Maximum SPL:  
@ 0.5 m (0,5 m): 99 dB  
C-weighted (calculated)  
Idle current draw:  
40 mA  
NOTE: The purpose of this document is to specify the nominal  
electrical and acoustical performance of the audio system  
for the HP Pavilion f70 flat panel LCD computer display.  
40  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
Care and Cleaning  
Care and Cleaning  
To maximize the screen lifespan of this product and to prevent  
damage to the liquid crystal display, it is recommended that you:  
Do not let liquid get on or into the monitor.  
Do not store or use the monitor in locations exposed to heat, direct  
sunlight, or extreme cold.  
Do not store or use the monitor in a dusty environment or in  
locations exposed to high humidity.  
Do not press sharp or pointed objects against the monitor.  
Avoid touching or pressing the screen of the monitor.  
Avoid setting contrast and brightness to their maximum levels for  
prolonged periods.  
Turn off the monitor when not in use.  
Do not place anything on or against the audio base (f70 17-inch  
monitor only).  
Use a soft brush or cloth to clean the audio base (f70 17-inch  
monitor only).  
Clean the screen with isopropyl alcohol or ethyl alcohol diluted  
with water (1:1) to prevent damage to the screens anti-glare  
coating.  
To clean the screen:  
1 Turn off the monitor and remove the power plug (pull the plug, not  
the cable).  
2 Soak a soft gauze cloth with isopropyl alcohol or ethyl alcohol  
diluted with water (1:1) and gently wipe the surface of the monitor.  
Do not dust it or wipe it with a cloth dampened with pure water.  
3 Dry with a clean, soft cotton cloth.  
CAUTION:  
Never use pure water to clean the LCD screen.  
Do not use cleaning solutions containing  
fluoride, acids, or alkalis. Do not use ketone  
substances such as acetone or solvents such as  
xylene or toluene to clean the monitor. Do not  
use benzene, thinner, ammonia, or any volatile  
substance to clean the monitor's screen or  
cabinet. These chemicals may damage the  
monitor.  
41  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
Environmental Information  
Environmental Information  
HP has a strong commitment to the environment. The HP monitor has  
been designed with respect for the environment as much as possible.  
HP can also take back your old monitor for recycling when it reaches  
the end of its useful life.  
HP has a product take-back program in several countries. The  
collected equipment is sent to one of HP's recycling facilities in  
Europe or the USA. As many parts as possible are reused. The  
remainder is recycled. Special care is taken with batteries and other  
potentially toxic substances; these are reduced to harmless  
components through a special chemical process. If you require more  
details about HP's product take-back program, contact your dealer  
or your nearest HP sales office.  
42  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
Regulatory Information  
Regulatory Information  
DECLARATION OF CONFORMITY  
According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014  
Manufacturer’s name:  
HEWLETT-PACKARD France  
Manufacturer’s address: 5 Avenue Raymond Chanas-Eybens  
38053 GRENOBLE Cedex 09 - FRANCE  
Declares that the products :  
Product Name  
Model Number  
HP 15" (LCD) Color Monitor HP 17" (LCD) Color Monitor  
D5063**  
D5064**  
(* can be any alphanumerical character)  
Conform to the following Product Specifications :  
§
§
SAFETY - International:IEC 60950:1991 +A1 +A2 +A3 +A4 / GB4943-1995.  
- Europe  
: EN 60950:1992 +A1 +A2 +A3 +A4 +A11.  
ELECTRO-MAGNETIC COMPATIBILITY  
- CISPR22:1997 / EN55022:1998 Class B  
- CISPR24:1997 / EN55024:1998  
- IEC 61000-3-3:1994 / EN61000-3-3:1995  
- GB9254-1998  
- FCC Title 47 CFR, Part 15 Class B 1)  
- ICES-003, Issue 3  
- VCCI-B  
- AS/NZ 3548:1995  
Products bearing the CE marking(2) also comply with:  
IEC 61000-3-2:1995 / EN 61000-3-2:1995. + A14  
Those products comply with the requirements of the following Directives and carry the CE-markin  
accordingly: EMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC, both amended by  
the Directive 93/68/EEC.  
1) This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference that may cause  
undesired operation.  
2) All products sold in the European Economic Area (EEA) bear the CE marking.  
Grenoble  
July 2001  
Didier CABARET  
Quality Manager  
For Compliance Information ONLY, contact :  
USA contact : Hewlett Packard Company, Corporate Product Regulations Manager 3000 Hanover Street,  
Palo Alto, CA 94304. (Phone (+1) (650) 857-1501)  
43  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp pavilion f50/f70 LCD Monitor  
Regulatory Information  
For Compliance Information ONLY, contact:  
USA contact: Hewlett-Packard Company  
Corporate Product Regulations Manager  
3000 Hanover Street  
Palo Alto, CA 94304  
Phone : (+1) (650) 857-1501  
Notice for the USA: FCC Class B Statement  
Federal Communications Commission Radio Frequency Interference  
Statement Warning:  
This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential installation.  
This equipment generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference  
to radio communications. However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful interference to  
radio or television reception, that can be determined by turning the equipment off and  
on, the user is encouraged to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the distance between the equipment and the receiver.  
Connect the equipment to an outlet on a different circuit to the one the receiver is  
connected to.  
Consult your dealer or an experienced radio/TV technician for help.  
Safety Warning for USA  
If the power cord is not supplied with the monitor, select the proper power cord  
according to your national electric specifications.  
USA: use a UL listed type SVT detachable power cord.  
Notice for Canada  
This Class Bdigital apparatus complies with all requirements of the Canadian  
Interference-Causing Equipment Regulations (ICES.003).  
Cet appareil numérique de la Classe B est conforme a la norme MB-003 du Canada.  
MPRII Statement  
The monitor complies with MPRII guidelines for upper limits of electrostatic and  
magnetic field emissions, from the Swedish National Board of Measurement and  
Testing.  
44  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Regulatory Information  
Notice for Korea  
Notice for Germany  
Hinweis für Deutschland: Geräuschemission  
Lärmangabe nach Maschinenlärmverordnung 3 GSGV  
(Deutschland)  
LpA < 70db am Arbeitsplatz normaler Betrieb nach  
EN27779: 11.92  
Notice for Japan (Class B)  
45  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Regulatory Information  
TCO '99 (European Union Only)  
Congratulations! You have just purchased a TCO '99 approved and  
labeled product! Your choice has provided you with a product  
developed for professional use. Your purchase has also contributed  
to reducing the burden on the environment and to the further  
development of environmentally adapted electronics products.  
This product meets the requirements for the TCO '99 scheme which  
provides for an international environmental and quality labeling of  
personal computers. The labeling scheme was developed as a joint  
effort by the TCO (The Swedish Confederation of Professional  
Employees), Svenska Naturskyddsforeningen (The Swedish Society  
for Nature Conservation), Statens Energimyndighet (The Swedish  
National Energy Administration), and SEMKO AB.  
The requirements cover a wide range of issues: environmental,  
ergonomic, usability, reduction of electric and magnetic fields,  
energy consumption and electrical safety.  
Why do we have environmentally labeled computers?  
In many countries, environmental labeling has become an  
established method for encouraging the adaptation of goods and  
services to the environment. The main problem, as far as computers  
and other electronics equipment are concerned, is that  
environmentally harmful substances are used both in the products  
and during their manufacture. Since it is not so far possible to  
satisfactorily recycle the majority of electronics equipment, most of  
these potentially damaging substances sooner or later enter nature.  
There are also other characteristics of a computer, such as energy  
consumption levels, that are important from the viewpoints of both  
the work (internal) and natural (external) environments. Since all  
methods of electricity generation have a negative effect on the  
environment (for example, acidic and climate-influencing emissions,  
radioactive waste), it is vital to save energy. Electronics equipment in  
offices is often left running continuously and thereby consumes a lot  
of energy.  
46  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Regulatory Information  
What does the environmental labeling involve?  
The environmental demands have been developed by Svenska  
Naturskyddsforeningen (The Swedish Society for Nature  
Conservation). These demands impose restrictions on the presence  
and use of heavy metals, brominated and chlorinated flame  
retardants, CFCs (freons) and chlorinated solvents, among other  
things. The product must be prepared for recycling, and the  
manufacturer is obliged to have an environmental policy which must  
be adhered to in each country where the company implements its  
operational policy.  
The energy requirements include a demand that the computer and/or  
monitor, after a certain period of inactivity, shall reduce its power  
consumption to a lower level in one or more stages. The length of  
time to reactivate the computer shall be reasonable for the user.  
Below, you will find a brief summary of the environmental  
requirements met by this product. The complete environmental  
criteria document may be ordered from:  
TCO Development  
SE-114 94 Stockholm, Sweden  
Fax: +46 8 782 92 07  
Email (Internet): [email protected]  
Current information regarding TCO '99 approved and labeled  
products may also be obtained over the Internet, using the address:  
47  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Regulatory Information  
Environmental requirements  
Flame retardants:  
Flame retardants are present in printed circuit boards, cables, wires,  
casings and housings. Their purpose is to prevent, or at least to  
delay, the spread of fire. Up to 30% of the plastic in a computer  
casing can consist of flame retardant substances. Most flame  
retardants contain bromine or chloride, and those flame retardants  
are chemically related to another group of environmental toxins,  
PCBs. Both the flame retardants containing bromine or chloride and  
the PCBs are suspected of giving rise to severe health effects,  
including reproductive damage in fish-eating birds and mammals,  
1
due to the bio-accumulative* processes. Flame retardants have  
been found in human blood and researchers fear that disturbances in  
foetus development may occur.  
The relevant TCO '99 demand requires that plastic components  
weighing more than 25 grams must not contain flame retardants with  
organically bound bromine or chlorine. Flame retardants are  
allowed in the printed circuit boards since no substitutes are  
available.  
2
Cadmium:* *  
Cadmium is present in rechargeable batteries and in the colour-  
generating layers of certain computer displays. Cadmium damages  
the nervous system and is toxic in high doses. The relevant TCO '99  
requirement states that batteries, the colour-generating layers of  
display screens and the electrical or electronics components must not  
contain any cadmium.  
2
Mercury:* *  
Mercury is sometimes found in batteries, relays and switches. It  
damages the nervous system and is toxic in high doses. The relevant  
TCO '99 requirement states that batteries may not contain any  
mercury. It also demands that mercury is not present in any of the  
electrical or electronics components associated with the labeled unit.  
There is however one exception. Mercury is, for the time being,  
permitted in the back light system of flat panel monitors as there  
today is no commercially available alternative. TCO aims on  
removing this exception when a mercury free alternative is available.  
48  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Regulatory Information  
CFCs (freons):  
The relevant TCO '99 requirement states that neither CFCs nor  
HCFCs may be used during the manufacture and assembly of the  
product. CFCs (freons) are sometimes used for washing printed  
circuit boards. CFCs break down ozone and thereby damage the  
ozone layer in the stratosphere, causing increased reception on  
earth of ultraviolet light with e.g. increased risks of skin cancer  
(malignant melanoma) as a consequence.  
2
Lead:* *  
Lead can be found in picture tubes, display screens, solders and  
capacitors. Lead damages the nervous system and in higher doses,  
causes lead poisoning. The relevant TCO '99 requirement permits  
the inclusion of lead since no replacement has yet been developed.  
*1 Bio-accumulative is defined as substances which accumulate within living  
organisms.  
*2* Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.  
49  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp pavilion f50/f70 LCD Monitor  
Regulatory Information  
50  
English  
X
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Car Seat PD144968A User Manual
Grizzly Sander G0644 User Manual
Grizzly Saw H7197 User Manual
Haier Air Conditioner HW 18L2H User Manual
Honeywell Automobile Parts VU443A User Manual
Hoshizaki Ice Maker DCM 500BAH User Manual
HP Hewlett Packard Grill Accessory 16089 A User Manual
HP Hewlett Packard Microphone 6632B User Manual
Husqvarna Snow Blower 12527HV User Manual
Impex Fitness Equipment DBR 234 User Manual