HANNspree Flat Panel Television ST54 10A1 User Manual

9.6" Liquid Crystal Display  
2F, No.362, Jui-Kuang Rd., Neihu District,  
Taipei City 114, Taiwan, R.O.C.  
TEL: 886-2-87520000  
Television  
ST54-10A1  
User's Manual  
FAX: 886-2-87527092  
NTSCTVTWEN1203  
MAC-001104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
7. Checking Package Contents ........................................ 17  
Connecting to AV Devices ........................................ 23  
Turning the TV On and Off ....................................... 28  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Warranty and Service  
The instructions on this manual are for the model(s) listed on the front  
cover. Before you start reading, check your product number by looking  
at the rear of your TV.  
Thank you for purchasing our Liquid Crystal Display Television (LCD  
TV). With this product, you will be able to enjoy superior audio and  
video while enriching your lifestyle with advanced technology.  
The Hannspree TV is warranted for one year limited service from the  
date the product is received (as shown on the Warranty and Service  
Manual); please refer to the "Warranty and Service Manual" for the  
detailed warranty information.  
Hannspree provides complete service information in the included "War-  
ranty and Service Manual", or directly from Hannspree global customer  
service center. Our service representatives will be very happy to serve  
you to your satisfaction.  
Hannspree global customer service center telephone number:  
From Taiwan please call 0800-008-800  
The Hannspree e-mail address:  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2
Preface  
This manual is designed to assist users in setting up and using the LCD  
TV. Information in this document has been carefully checked for accu-  
racy; however, no guarantee is given to the correctness of the contents.  
The information in this document is subject to change without notice.  
Copyright  
© Copyright 2003 Hannspree, Inc.  
All rights reserved. This product and related documentation are pro-  
tected by copyright and are distributed under licenses restricting their  
use, copying, and distribution. No part of this documentation may be  
reproduced in any form by any means without prior written authorization  
of Hannspree, Inc., and its licensors, if any.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
Description of Warning Symbols  
Warning  
Caution  
This symbol is used to remind  
users to pay attention to  
important descriptions regard-  
ing usage and maintenance  
(repair) or additional impor-  
tant information related to this  
product.  
This symbol is used to remind  
users to pay attention to the  
danger of electric shocks due  
to dangerous internal non-  
insulated components.  
Electric Power Notice  
Electric power may cause personal injury and mechanical damage if it is  
misused. Although safety has been taken into consideration during the  
design and production of this product, electric shock or fire can result  
when the product is misused. To prevent potential danger, follow the  
instructions below when installing, operating and cleaning the product.  
In addition, read the following “Safety Notices” carefully before using the  
product to ensure that your TV is safe and long-lasting.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4
Safety Notices  
Power Supply Safety Notes  
1. To avoid electric shocks, do not use an extended power cord or  
an outlet that does not match this product's plug or leaves the  
plug exposed.  
2. This product has a 3-pin grounded plug. The third pin connects  
to ground; do not remove it.  
3. If the power cord or plug is damaged or worn, unplug it immedi-  
ately and contact a qualified service technician for mainte-  
nance.  
4. To avoid fire or electric shocks, do not overload electric power  
outlets.  
Installation Safety Notes  
Antenna  
We suggest that you use an outdoor antenna to get the best signal  
possible unless you have cable TV or a centralized indoor antenna  
system. You may, however, use an antenna indoors if it is placed in  
a location free from interference.  
Location  
Avoid allowing the TV to get prolonged exposure to sunlight or  
other strong sources of heat. Leave sufficient distance between the  
TV and the wall to provide enough space for the emission of heat.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Before You Proceed  
1. Read the Safety Notices and the User’s Manual carefully  
before turning the product on.  
2. Keep your User’s Manual in a safe place for future reference.  
Keep the box and packaging in case the product needs to be  
shipped in the future.  
3. Follow the product and warning label instructions.  
4. Any changes or modifications that do not follow the instructions  
in this manual will void this product's warranty.  
Warning  
To reduce the risk of fire or electric shock, do not expose this  
product to rain or moisture.  
Power  
To avoid danger of fires or electric shock, make sure that you use a  
proper adapter. The TV is compatible with the following adapters:  
• EDAC POWER ELECTRONICS CO., LTD.: EA1050E-120  
• LI SHIN INTERNATIONAL ENTERPRISE CORP.: 0217B1240  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optimal Viewing Area  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any ventilation openings. Install  
in accordance with the manufacturer’s  
instructions.  
8. Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
9. Do not defeat the safety purpose of the  
polarized or grounding-type plug: A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade  
or the third prong are provided for your  
safety. If the provided plug does not fit into  
your outlet, consult an electrician for  
replacement of the obsolete outlet.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Protect the power cord from being walked on  
or pinched particularly at the plug, conve-  
nience receptacles, and the point where they  
exit from the apparatus.  
11. Use only with a cart, stand, tripod, bracket,  
or table specified by the manufacturer, or  
sold with the apparatus. When a cart is used,  
use caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
12. Only use attachments/accessories specified  
by the manufacturer.  
13. Unplug this apparatus during lightning  
storms or when unused for long periods of  
time.  
14. Refer all servicing to qualified service per-  
sonnel. Servicing is required when the appa-  
ratus has been damaged in any way, such as  
if the power-supply cord or plug is damaged,  
liquid has been spilled or objects have fallen  
into the apparatus, the apparatus has been  
exposed to rain or moisture, does not oper-  
ate normally, or has been dropped.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Personal Safety  
To avoid overloading the power supply, do not  
plug too many electrical devices into an outlet or  
extension cable.  
Dangerous high-voltage electric power compo-  
nents are located inside the TV. To avoid electric  
shock, do not disassemble the casing.  
Do not place or drop metals, small objects, or  
flammable materials in the vent to avoid an elec-  
tric shock or a fire.  
If the TV is dropped, falls down, or is otherwise  
damaged, unplug the power cord immediately  
and notify a qualified service technician.  
If any fluid is sprayed or dropped into the TV,  
remove the power plug immediately and notify a  
qualified service technician.  
The screen of the TV is made of glass, be care-  
ful to avoid hitting or scraping it. If the screen is  
broken, avoid cutting yourself on the broken  
glass.  
Do not allow children to use the TV unattended  
to avoid accidents caused by improper opera-  
tion.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
To avoid damage to power circuits, do not place  
the TV in locations where there is excessive  
steam or dust.  
Do not place the TV on a bed, sofa, carpet, or in  
a sealed cabinet to avoid blocking the product's  
vents.  
Install the outdoor antenna far from power trans-  
mission lines to avoid possible danger.  
Remove the power cord and antenna connector  
when there is a storm or when the TV is not in  
use for a long period to avoid electric shock from  
lightning.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
This product is designed for power sources as  
labeled on the casing. Avoid using any other  
power accessories to avoid electric shock or  
other damage.  
V
The plug can be inserted into an outlet in only  
one direction. Notify a qualified service techni-  
cian if you cannot plug it in correctly.  
If there is any problem that cannot be resolved  
according to the instructions given in this man-  
ual, notify a qualified service technician immedi-  
ately. Do not attempt any methods not covered in  
this manual.  
Maintenance  
Do not attempt to repair the TV by yourself.  
Notify a qualified service technician. Ask the ser-  
vice technician to complete a safety inspection  
before switching the power on after completing  
any maintenance.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Regulatory Information  
FCC Compliance Statement1  
This device complies with part 15 of the FCC Rules. Operation is sub-  
ject to the following two conditions: (1) This device may not cause harm-  
ful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC Rules. These lim-  
its are designed to provide reasonable protection against harmful inter-  
ference in a residential installation. This equipment generates, uses and  
can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be deter-  
mined by turning the equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected  
Consult the dealer or an experienced radio/TV technician for help  
Warning: A shielded-type power cord is required in order to meet FCC  
emission limits and also to prevent interference to nearby radio and tele-  
vision reception. It is essential that only the supplied power cord be  
used. Use only shielded cables to connect I/O devices to this equip-  
ment. You are cautioned that changes or modifications not expressly  
approved by the party responsible for compliance could void your  
authority to operate the equipment.  
1. applies only to products purchased in the United States of America  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DOC Compliance Notice1  
This digital apparatus does not exceed the Class B limits for radio noise  
emissions from digital apparatus as set out in the Radio Interference  
Regulations of the Canadian Department of Communications.This  
device complies with Canada ICES-003 Class B.  
CE Conformity Statement2  
This device complies with the requirements set out in the Council Direc-  
tive on the approximation of the Laws of the Member States relating to  
Electromagnetic Compatibility (89/336/EEC) and the Amendment Direc-  
tive (92/31/EEC), Low-Voltage Directive (73/23/EEC) and the Amend-  
ment Directive (93/68/EEC).  
1. applies only to products purchased in Canada  
2. applies only to products purchased in the European Union  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Introducing the TV  
Thank you for purchasing this Liquid  
Crystal Display TV. Your TV is designed to  
be safe, versatile, and easy to use.  
The tread design makes it a fun addition to  
any room.  
You can watch standard NTSC television  
channels, and easily connect a VCR, VCD,  
or DVD player to the standard CVBS and  
S-Video input ports located at the rear of  
the unit.  
Convenient control buttons located on the  
front panel let you change channels, adjust the volume, and change display  
settings through an easy-to-use on-screen menu system. The TV speakers  
provide full, rich stereo sound and a convenient audio output port lets you  
connect to an external audio system or headphones.  
Features  
9.6-inch color TFT LCD TV  
Safe, sturdy construction  
Built-in TV tuner  
Audio/video support:  
– Stereo audio inputs  
– Composite video inputs  
– S-Video input  
On-screen display (OSD) menu system  
Multi-channel Television Sounds (MTS) Stereo with SAP  
Built-in 2W+2W stereo audio amplifier  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
7
Checking Package Contents  
Make sure the following components are included in the box. Contact your  
vendor immediately if anything is missing or damaged.  
TV  
CH  
SOURCE  
MENU  
VOL  
User’s Manual  
Quick Start Guide  
Warranty and Service  
Manual  
User's Man  
ual  
Quick S  
tart  
Guide  
W
arranty an  
d service  
manual  
Wire Material Package  
Power Cord  
Power Adapter  
4-IN-1 Cable  
G
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
8
Getting to Know Your TV  
Front View  
6
CH  
VOL  
MENU  
SOURCE  
7
7
VOL  
CH  
SOURCE  
MENU  
1
2
3
4
5
Description  
Function  
Volume up (VOL+): Increases the  
volume. Volume down (VOL):  
Decreases the volume.  
1
Adjust volume  
Turns the on-screen display (OSD)  
menus on and off.  
2
3
4
Menu  
Power  
Power LED  
Turns the TV on and off.  
Green LED indicates power on.  
Selects the input source to be displayed  
(TV, AV1, or AV2).  
Source  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Description  
Function  
Channel up (CHS): Increases the channel  
number. Channel down (CHT): Decreases  
the channel number.  
5
Select channel  
6
7
Signal sensor  
Speakers  
Point the remote control at this sensor.  
Output audio content.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Input and Output Ports  
AV1  
L
AV2  
R
VIDEO  
DC-IN  
ANT  
AV1  
L
VIDEO  
R
AV2  
ANT  
DC-IN  
5
1
2
3
4
Description  
DC-IN  
Function  
1
2
3
Connects to the included power adapter.  
Antenna/cable TV  
line in  
Connects to an antenna or CATV cable  
television line.  
Headphone line out Connects to headphone.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Description  
Function  
Use the included 4-in-1 Audio/Video  
cable to connect external devices, such  
as a VCR, VCD, or DVD player.  
Audio Input: AV connectors white and  
red audio cables.  
4
5
AV2  
Video Input: AV connector video  
(yellow) or S-Video cables.  
Use the AV1 input to connect an external  
device, such as a VCR, or a VCD, or  
DVD player.  
Audio Input: AV connector white and  
red audio cables.  
AV1  
Video Input: AV connector video  
(yellow) cable.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Getting Started  
Connecting to an Antenna or Cable TV  
1
Connect one end of the VHF/UHF (Antenna) or CATV cable to the  
ANT Jack (VHF/UHF IN Jack) on the back of the TV.  
2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to  
the Antenna or CATV socket.  
AV1  
AV2  
R
L
VIDEO  
DC-IN  
ANT  
Antenna  
AV1  
L
VIDEO  
R
AV2  
ANT  
DC-IN  
ANT jack  
(VHF/UHF IN jack)  
socket  
Antenna/CATV  
Antenna/CATV  
coaxial cable  
Note  
If you cannot receive channels after connecting to an antenna or cable TV  
line, try scanning for channels. See “Auto Program” on page 47.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting to AV Devices  
Connect external devices such as VCD/DVD players or VCRs to the TV  
using the AV1 and AV2 ports on the back of the TV.  
Connecting to a VCR, VCD or DVD Player  
The illustration presented here shows you how to connect your TV to a  
VCR, VCD or DVD player. Actual connections may vary according to the  
make and model of your device. Refer to the user’s manual included with  
the AV device for more detailed instructions.  
VCR  
AV1  
L
AV2  
R
VIDEO  
DC-IN  
ANT  
VCD  
DVD  
AV1  
L
VIDEO  
R
AV2  
ANT  
DC-IN  
B
R
W
Y
AV2  
AV  
connectors  
S-Video  
connector  
Cables and connectors are color-coded  
(black, red, white, yellow).  
4-IN-1 cable  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting to a Video Camera  
The following illustration shows you how to connect the TV to a camcorder.  
Actual connections may vary according to the make and model of the  
device. Refer to the user’s manual included with the camcorder for more  
detailed instructions.  
S
WB  
AV1  
AV2  
R
L
VIDEO  
DC-IN  
ANT  
AV1  
L
VIDEO  
R
AV2  
ANT  
DC-IN  
S-Video  
connector  
AV2  
B
R
W
Y
4-in-1 cable  
AV connectors  
Note: When connecting the  
S-Video connector and AV  
connectors at the same time,  
the priority is given to the S-  
Video connector.  
Cables and connectors are color-  
coded (black, red, white, yellow).  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting Headphones  
Headphones may be used to listen to the TV instead of using the built-in  
speakers. Connect headphones to the headphone line out port as  
illustrated.  
Headphones  
AV1  
AV2  
R
L
VIDEO  
DC-IN  
ANT  
AV1  
L
VIDEO  
R
AV2  
ANT  
DC-IN  
Headphone  
line out port  
Notes  
Headphones are not included with the product.  
The internal TV speakers will not output sound when headphones are  
plugged in.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting the Power Adapter  
1
Connect the power cord to the power adapter as illustrated.  
2 Plug the power adapter connector into the DC-IN on the rear panel of  
the TV.  
3 Plug the three-pronged plug at the other end of the power cord into a  
power outlet.  
Power outlet  
Three-pronged  
plug  
AV1  
AV2  
R
L
VIDEO  
DC-IN  
ANT  
Power cord  
AV1  
L
VIDEO  
R
AV2  
ANT  
DC-IN  
DC-IN  
Power adapter  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
10  
Using the TV  
Using the Remote Control  
For best results, use the remote control within a distance of 5 meters (16  
feet) from the front of the TV’s signal sensor. Do not exceed an angle of 30  
degrees when pointing at the signal sensor. Refer to the following  
illustration.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Turning the TV On and Off  
1
Press the POWER  
button on the  
remote control or on the TV control  
panel. The power LED indicator on  
the front of the TV changes from red  
to green, indicating that the power is  
on.  
CH 33  
CH  
2 Press the POWER  
button again.  
SOURCE  
MENU  
VOL  
The power LED changes from green  
to red, indicating that the TV is in  
standby (off) mode.  
Power button  
/Power LED  
Selecting Channels  
1
Press the CH UP button to increase  
the channel number by one.  
CH 33  
2 Press the CH DOWN button to  
decrease the channel number by  
one.  
3 Enter the specific channel number  
by pressing the number buttons on  
the remote control. The channel is  
displayed on the LCD panel.  
CH  
SOURCE  
MENU  
VOL  
Channel down  
Channel up  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Switching Source Signals  
Press the SOURCE button to select  
different source signals.  
CH, AV1, and AV2 appear on the top  
right corner of the screen in that order.  
CH 33  
Note  
The TV supports S-Video input in addi-  
tion to normal video and audio signals.  
The TV detects the signal type automati-  
cally and gives priority to S-video when  
two signals are detected at the same  
time.  
CH  
SOUR
MENU  
VOL  
Source  
Adjusting the Volume  
1
Press the VOL UP button to  
increase the volume.  
2 Press the VOL DOWN button to  
decrease the volume.  
MUTE  
3 Press the MUTE button. The word  
“MUTE” appears on the top right  
corner of the screen and sound is  
turned off.  
CH  
SOURCE  
MENU  
VOL  
4 Press the MUTE button again to  
restore the original volume.  
Volume up  
Volume down  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Adjusting On-Screen Display (OSD)  
Settings  
11  
The On-Screen Display (OSD) menu system provides a quick and simple  
method to adjust your TV's settings. This chapter describes how to change  
each of the available settings. The OSD can be used with either the front  
control panel or remote control.  
Button Descriptions  
Front Panel Control  
Menu  
MENU  
CHS  
CHT  
CH UP  
CH DOWN  
VOL UP  
VOL DOWN  
+
VOL  
VOL  
The following sections explain how to adjust settings in the OSD menus  
using the front panel control.You can also use the arrow buttons on the  
remote control to adjust settings.  
OSD Setting Menus  
MAIN MENU  
PICTURE  
AUDIO  
TV  
CUSTOMIZE  
MENU  
SEL  
ENTER  
Press MENU to enter the OSD  
The Main Menu appears.  
Main Menu screen.  
Note  
Press the menu button to exit the OSD menus and submenus at any time.  
Repeatedly press the MENU button to exit the OSD menus and submenus  
and return to TV mode.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Picture Setting  
MAIN MENU  
PICTURE  
AUDIO  
TV  
CUSTOMIZE  
MENU  
SEL  
ENTER  
Press MENU to enter the OSD  
Press the VOL UP button to enter  
Main Menu screen.  
the PICTURE Menu.  
Note  
You can operate the OSD with either the remote control or the front panel  
control.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Brightness  
1 Press the VOL UP button. The  
PICTURE MENU  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
HUE  
brightness slide bar appears.  
0
30  
0
0
0
SATURATION  
COLOR  
PRESET  
NEUTRAL  
MENU  
SEL  
ENTER  
2 Press the VOL UP button to  
increase the brightness.  
BRIGHTNESS  
+12  
3 Press the VOL DOWN button to  
decrease the brightness.  
BRIGHTNESS  
-12  
4 Press MENU to confirm the setting  
and return to the Picture Menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
MAX  
MID  
MIN  
BRIGHTNESS  
+12  
0
-12  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Contrast  
1
Press the CH DOWN button to select  
PICTURE MENU  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
HUE  
CONTRAST.  
0
30  
2 Press the VOL UP button. The  
0
0
0
contrast slide bar appears.  
SATURATION  
COLOR  
PRESET  
NEUTRAL  
MENU  
SEL  
ENTER  
3 Press the VOL UP button to  
increase the contrast.  
CONTRAST  
30  
4 Press the VOL DOWN button to  
decrease the contrast.  
CONTRAST  
5 Press MENU to confirm the setting  
and return to the Picture Menu.  
15  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
MAX  
MID  
MIN  
CONTRAST  
30  
15  
1
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sharpness  
1
Press the CH DOWN button to select  
PICTURE MENU  
SHARPNESS.  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
HUE  
0
30  
2 Press the VOL UP button. The  
0
0
0
sharpness slide bar appears.  
SATURATION  
COLOR  
NEUTRAL  
PRESET  
MENU  
SEL  
ENTER  
3 Press the VOL UP button to  
increase the sharpness.  
SHARPNESS  
+8  
4 Press the VOL DOWN button to  
decrease the sharpness.  
SHARPNESS  
5 Press MENU to confirm the setting  
and return to the Picture Menu.  
-8  
Note  
The new setting is confirmed automati-  
cally when the OSD times out.  
MAX  
MID  
MIN  
SHARPNESS  
+8  
0
-8  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Hue  
1
Press the CH DOWN button to select  
PICTURE MENU  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
HUE  
0
30  
HUE.  
2 Press the VOL UP button. The hue  
0
0
0
slide bar appears.  
SATURATION  
COLOR  
PRESET  
NEUTRAL  
MENU  
SEL  
ENTER  
3 Press the VOL UP button to  
increase the hue toward the green  
end of the spectrum. The image  
becomes more green.  
HUE  
+24  
4 Press the VOL DOWN button to  
decrease the hue toward the red end  
of the spectrum. The image  
HUE  
-24  
becomes more red.  
5 Press MENU to confirm the setting  
and return to the Picture Menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
MAX  
MID  
MIN  
HUE  
+24  
0
-24  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Saturation  
1
Press the CH DOWN button to select  
PICTURE MENU  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
HUE  
0
30  
SATURATION.  
2 Press the VOL UP button. The  
0
0
0
saturation slide bar appears.  
SATURATION  
COLOR  
PRESET  
NEUTRAL  
MENU  
SEL  
ENTER  
3 Press the VOL UP button to  
increase the saturation.  
SATURAATION  
+24  
4 Press the VOL DOWN button to  
decrease the saturation.  
SATURAATION  
-24  
5 Press MENU to confirm the setting  
and return to the Picture Menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
MAX  
MID  
MIN  
SATURATION  
+24  
0
-24  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Color  
1
Press the CH DOWN button to  
PICTURE MENU  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
HUE  
0
30  
0
0
0
select COLOR.  
2 Press the VOL UP button. The  
current setting appears blinking in  
the brackets.  
SATURATION  
COLOR  
PRESET  
NEUTRAL  
MENU  
ADJ  
Neutral Color  
Press the VOL UP button to select  
NEUTRAL, then press MENU.  
PICTURE MENU  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
HUE  
0
30  
0
0
0
“NEUTRAL” appears in the brackets.  
SATURATION  
COLOR  
PRESET  
NEUTRAL  
MENU  
ADJ  
Warm Color  
PICTURE MENU  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
HUE  
0
30  
0
Press the VOL UP button to select  
WARM, then press MENU. “WARM”  
appears in the brackets.  
0
SATURATION  
COLOR  
PRESET  
0
WARM  
MENU  
ADJ  
Cold Color  
PICTURE MENU  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
HUE  
0
30  
0
Press the VOL UP button to select  
COLD, then press MENU. “COLD”  
appears in the brackets.  
0
SATURATION  
COLOR  
PRESET  
0
COLD  
MENU  
SEL  
ENTER  
Note  
The default color temperature is  
NEUTRAL.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Preset  
1
Press the CH DOWN button to  
PICTURE MENU  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
HUE  
0
30  
select PRESET.  
0
2 Press the VOL UP button. “OK”  
appears in the brackets. All picture  
settings are returned to the factory-  
set default values.  
0
SATURATION  
0
NEUTRAL  
OK  
COLOR  
PRESET  
MENU  
SEL  
ENTER  
Note  
The preset function erases all of your  
custom picture settings.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Audio Setting  
MAIN MENU  
PICTURE  
AUDIO  
TV  
CUSTOMIZE  
MENU  
SEL  
ENTER  
1
Press the CH UP / DOWN  
button to select AUDIO.  
Press MENU to enter the OSD  
Main Menu screen.  
2 Press the VOL UP button to  
enter the Audio Menu.  
Note  
You can operate the OSD with either the remote control or the front panel  
control.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Treble  
1 Press the VOL UP button. The  
AUDIO MENU  
treble slide bar appears.  
TREBLE  
BASS  
0
0
BALANCE  
ENHANCE  
PRESET  
0
ON  
MENU  
SEL  
ENTER  
2 Press the VOL UP button to  
increase the treble.  
TREBLE  
+24  
3 Press the VOL DOWN button to  
decrease the treble.  
TREBLE  
-24  
4 Press MENU to confirm the setting  
and return to the Audio Menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
MAX  
MID  
MIN  
Treble  
+24  
0
-24  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Bass  
1
Press the CH DOWN button to select  
BASS.  
AUDIO MENU  
TREBLE  
BASS  
BALANCE  
ENHANCE  
PRESET  
0
0
0
ON  
2 Press the VOL UP button. The bass  
slide bar appears.  
MENU  
SEL  
ENTER  
3 Press the VOL UP button to  
increase the bass.  
BASS  
+24  
4 Press the VOL DOWN button to  
decrease the bass.  
BASS  
5 Press MENU to confirm the setting  
and return to the Audio Menu.  
-24  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
MAX  
MID  
MIN  
Bass  
+24  
0
-24  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Balance  
1
Press the CH DOWN button to select  
AUDIO MENU  
BALANCE.  
TREBLE  
BASS  
BALANCE  
ENHANCE  
PRESET  
0
0
0
ON  
2 Press the VOL UP button. The  
balance slide bar appears.  
MENU  
SEL  
ENTER  
3 Press the VOL DOWN button to shift  
the balance to the left speaker.  
BALANCE  
-24  
4 Press the VOL UP button to shift the  
balance to the right speaker.  
BALANCE  
5 Press MENU to confirm the setting  
and return to the Audio Menu.  
+24  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
LEFT  
MID  
RIGHT  
Balance  
-24  
0
+24  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Enhance  
1
Press the CH DOWN button to select  
AUDIO MENU  
ENHANCE.  
TREBLE  
BASS  
BALANCE  
ENHANCE  
PRESET  
0
0
0
ON  
2 Press the VOL UP button to enter the  
setting field.  
3 Press the VOL UP button to turn  
enhance on or off.  
MENU  
SEL  
ENTER  
4 Press MENU to confirm your choice.  
Note  
Turning Enhance on boosts the volume;  
however, if the input signal is over  
specification, audio distortion may occur.  
Preset  
1
Press the CH DOWN button to  
AUDIO MENU  
select PRESET.  
TREBLE  
BASS  
0
0
2 Press the VOL UP button. “OK”  
appears in the brackets. All audio  
settings are returned to the factory-  
set default values.  
BALANCE  
ENHANCE  
PRESET  
0
ON  
OK  
MENU  
SEL  
ENTER  
Note  
The preset function erases all of your  
custom audio settings.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
TV Setting  
MAIN MENU  
PICTURE  
AUDIO  
TV  
CUSTOMIZE  
MENU  
SEL  
ENTER  
1
Press the CH UP  
/
DOWN  
button to select TV.  
Press MENU to enter the OSD  
Main Menu screen.  
2 Press the VOL UP button to  
enter the TV Menu.  
Note  
You can operate the OSD with either the remote control or the front panel  
control.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TV/CATV  
Press the VOL UP button. The current  
setting appears flashing in the  
brackets.  
TV MENU  
TV/CATV  
CATV  
CH ADD/ERASE  
AUTO PROGRAM  
MENU  
SEL  
ENTER  
Receiving Cable TV  
TV MENU  
TV/CATV  
Press the VOL UP button to select  
CATV, then press MENU. “CATV”  
appears in the brackets.  
CATV  
CH ADD/ERASE  
AUTO PROGRAM  
MENU  
+ADJ  
Receiving Broadcast TV  
TV MENU  
Press the VOL UP button to select TV,  
then press MENU. “TV” appears in the  
brackets.  
TV/CATV  
CH ADD/ERASE  
AUTO PROGRAM  
TV  
MENU  
+ADJ  
Note  
The default TV setting is “CATV”.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Channel Add/Erase  
1 Press the CH DOWN button to  
select CH ADD/ERASE.  
TV MENU  
TV/CATV  
CH ADD/ERASE  
AUTO PROGRAM  
CATV  
2 Press the VOL UP button. The OSD  
menu display switches to the  
following screen.  
MENU  
SEL  
ENTER  
3 Press the CH UP/ CH DOWN button  
on the front panel to select a channel.  
TV  
43  
CH UP/DOWN  
-ERASE ADD+  
MENU  
Add Channel  
Then press the VOL UP on the front  
panel button to add the selected  
channel. The channel number changes  
from yellow into green after adding the  
channel.  
Erase Channel  
Then press the VOL DOWN button on  
the front panel to erase the selected  
channel. The channel number changes  
from green into yellow after erasing the  
channel.  
Note  
You can still access the erased channel  
by entering the channel number using  
the number buttons on the remote  
control. Add the channel again if it was  
erased accidentally.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Auto Program  
1
Press the CH DOWN button to  
TV MENU  
select AUTO PROGRAM.  
TV/CATV  
CATV  
CH ADD/ERASE  
AUTO PROGRAM  
MENU  
SEL  
ENTER  
2 Press the VOL UP button to begin  
auto programming. The screen  
displays channels incrementally as  
the TV scans for available  
channels.  
AUTO PROGRAM  
TV 44  
Note  
The screen displays the first channel that  
is successfully found after scanning is  
completed.  
.
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Customize Setting  
MAIN MENU  
PICTURE  
AUDIO  
TV  
CUSTOMIZE  
MENU  
SEL  
ENTER  
Press MENU to enter the OSD  
1
Press the CH UP / DOWN  
Main Menu screen.  
button to select CUSTOMIZE.  
2 Press the VOL UP button to  
enter the Customize Menu.  
Note  
You can operate the OSD with either the remote control or the front panel  
control  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sleep Timer  
The sleep timer turns the TV off automatically after a set time.  
1 Press the VOL UP button to select  
CUSTOMIZE MENU  
SLEEP TIMER  
a value: OFF, 30, 60, 90, or 120  
minutes.  
OFF  
OSD TIMEOUT 20 SEC  
LANGUAGE  
ENGLISH  
MENU  
SEL  
ENTER  
2 Press MENU to confirm your  
CUSTOMIZE MENU  
SLEEP TIMER  
OSD TIMEOUT 20 SEC  
choice.  
MIN  
30  
LANGUAGE  
ENGLISH  
MENU  
+ADJ  
30SLEEP  
60SLEEP  
90SLEEP  
120SLEEP  
You can also press SLEEP on the  
remote control to select 30, 60, 90 or  
120 minutes. The setting appears on  
the TV screen.  
The remaining time is updated every  
10 minutes on the display. During the  
last minute, the sleep timer flashes.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
OSD Timeout  
This setting allows you to set the length of time the OSD menus appear on  
the screen when a button is not pressed.  
1
Press the CH DOWN button to select  
CUSTOMIZE MENU  
SLEEP TIMER  
OSD TIMEOUT.  
OFF  
OSD TIMEOUT 20 SEC  
2 Press the VOL UP button. The  
current setting appears flashing in  
the brackets.  
LANGUAGE  
ENGLISH  
MENU  
+ADJ  
3 Press the VOL UP button to select a  
value: 20, 40, or 60 seconds.  
4 Press MENU to confirm your choice.  
Language  
1
Press the CH DOWN button to select  
CUSTOMIZE MENU  
SLEEP TIMER  
LANGUAGE.  
OFF  
OSD TIMEOUT 20 SEC  
2 Press the VOL UP button. The  
current setting appears flashing in  
the brackets.  
LANGUAGE  
ENGLISH  
MENU  
SEL  
ENTER  
3 Press the VOL UP button to select  
ENGLISH or CHINESE.  
4 Press MENU to confirm your choice.  
MENU  
Note  
The default language setting is Traditional  
Chinese.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
12  
Taking Care of Your TV  
Turn the power off before you begin cleaning the  
TV.  
For best results, use a clean lens cloth to  
remove dust and fingerprints from the screen.  
Do not wipe the shell of the TV with alcohol,  
methanol, gasoline or oil products to avoid  
damaging the finish. Wipe the shell with a dry  
soft cloth and use neutral cleaning fluids.  
GAS  
OIL  
If your model has leather components, wipe the  
leather parts with a dry cloth and keep the area  
dry. Place the TV far from sources of steam to  
avoid making the leather wet.  
Be careful to remove the power plug correctly.  
Hold the plug instead of pulling the power cord.  
Arrange the power cord with other cords to avoid  
knotting or bending which may cause fire due to  
damage or electric leakage.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
13  
Troubleshooting  
Situation  
Solution  
Connect the power cord properly.  
Press the POWER button on the con-  
trol panel or remote control.  
Press the SOURCE button to cycle  
through connected video sources.  
Press the Channel up or Channel  
down button to switch to other TV  
stations.  
No picture and sound.  
Check the TV/CATV OSD settings.  
Make sure all cables are connected  
properly.  
Check the antenna and cable connec-  
tions.  
Adjust the brightness in the OSD  
No picture, or poor picture,  
sound is OK.  
Adjust the saturation in the OSD  
Picture is not in color.  
Press the Volume up button on the  
control panel or remote control.  
Make sure the MTS option is set to  
MAIN or MONO.  
Picture is OK, no sound.  
One of the speakers has no  
sound.  
Adjust the balance in the OSD  
Try the Auto Program function in the  
OSD “TV Setting” menu. See “Auto  
Can’t receive some TV chan-  
nels using cable TV.  
Use the Preset function in the OSD  
Picture and Audio menu.  
Want to reset TV settings.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Situation  
Solution  
If OSD items are colored light blue,  
the system is in a state such that  
those settings are not available. For  
example, video setting is available in  
TV mode.  
Cannot operate menus.  
Make sure the video signal cable is  
connected properly.  
No image but have sound.  
No sound but have image.  
Make sure the source device is func-  
tioning properly.  
Set the volume to a higher level.  
Make sure the audio cable is con-  
nected securely.  
Turn the mute off.  
Make sure the video signal cable is  
connected properly.  
Screen image turns over.  
Adjust the location of the antenna,  
placing it far from roads or sources of  
interference.  
Check the antenna and the video sig-  
nal line connections.  
Snow appears on the screen.  
Readjust the sharpness setting.  
Choose programs with high quality  
signals.  
Adjust the direction of the antenna or  
change the video signal cable.  
Blurred or overlapped  
images.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Specifications  
ST54-10A1  
LCD Panel Size  
Aspect Ratio  
9.6-inch TFT  
4:3  
Best Resolution  
Maximum Display Area  
TV System  
800 (horizontal) x 600 (vertical)  
194.4 mm (H) x 145.8 mm (V)  
NTSC  
AV1: Composite Video (RCA jack; yellow)  
AV2: mini-DIN 10-pin (Composite + S-  
Video)  
Video System  
AV1: L/R RCA jacks (audio input)  
AV2: mini-DIN 10-pin L/R RCA jacks (audio  
input)  
Audio System  
3.5 mm headphone jacks (audio output)  
2W + 2W  
Built-in stereo audio  
amplifier  
Power Supply  
100~240V, 50/60 Hz, 12V DC  
30W (Max.)  
Power Consumption  
Weight (including base)  
1.82 KG  
Dimensions (including  
base)  
298 mm (H) x 379 mm (W) x 45 mm (D)  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
15  
Glossary  
Aspect Ratio The ratio of width to height of a film, image or display screen.  
Broadcast TV Broadcasting video signals using high-frequency electromagnetic  
waves to distribute television channels to viewers (standard TV broadcast).  
CATV Community Antenna Television, the original name for cable TV. A television  
distribution system that uses coaxial cable instead of the traditional radio broad-  
casting (over-the-air) method to deliver television, FM radio, and other services to  
consumers.  
Color Temperature Adjusting the color temperature enables you to set the inten-  
sity of white light. Color temperature is measured in Kelvin (K). Higher color tem-  
peratures result in a blue tint. Lower temperatures result in a red tint.  
Hue Colors in a color system are measured by hue, saturation and luminance.  
Hue indicates the predominant color.  
LCD Liquid Crystal Display. A display technology that uses rod-shaped molecules  
(liquid crystals) that flow like liquid and bend light.  
MAIN is the default audio signal belonging to a particular channel.  
MTS Multi-channel Television Sound. Enables reception of audio other than the  
primary (MAIN) audio signal. SAP (Second Audio Program) enables reception of a  
separate channel that may be a different language or completely different informa-  
tion such as the news.  
RCA connector An RCA or phono connector is a plug and socket for a two-wire  
(signal and ground) coaxial cable that is widely used to connect audio and video  
components. RCA sockets are commonly found at the rear of A/V equipment.  
Saturation Chromatic purity indicating the amount of white contained in a color.  
Fully saturated colors are pure colors; less saturated colors appear as pastel  
shades.  
S-Video Super-video, a video cabling standard used to transmit video by keeping  
brightness (Y) and color information (C) on separate channels. Most often used  
with camcorders, VCRs, and quality receivers and amplifiers to provide sharper pic-  
tures.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Grundig CRT Television LXW 68 8720 Dolby User Manual
Harbor Freight Tools Camera Accessories 94555 User Manual
Hotpoint Ventilation Hood HD90X User Manual
Hotpoint Washer BHWM149 User Manual
HP Hewlett Packard Portable Stereo System iPod plus HP User Manual
HP Hewlett Packard Telescope 1165A User Manual
Husqvarna Chainsaw T540 XP User Manual
Hypertec Carrying Case Z0701 V2 User Manual
iHome Speaker IHM11 User Manual
Impex Home Gym TC 3000 User Manual