HANNspree Flat Panel Television K209 10A1 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Connecting to an Antenna or Cable TV ..................... 20  
Turning the TV On and Off ....................................... 27  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Channel Add/Erase ............................................. 46  
Miscellaneous Setting .............................................. 47  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Warranty and Service  
The instructions on this manual are for the model(s) listed on the front  
cover. Before you start reading, check your product number by looking  
at the rear of your TV.  
Thank you for purchasing our Liquid Crystal Display Television (LCD  
TV). With this product, you will be able to enjoy superior audio and  
video while enriching your lifestyle with advanced technology.  
The Hannspree TV is warranted for one year limited service from the  
date the product is received (as shown on the Warranty and Service  
Manual); please refer to the "Warranty and Service Manual" for the  
detailed warranty information.  
Hannspree provides complete service information in the included "War-  
ranty and Service Manual", or directly from Hannspree global customer  
service center. Our service representatives will be very happy to serve  
you to your satisfaction.  
Hannspree global customer service center telephone number:  
From Taiwan please call 0800-008-800  
The Hannspree e-mail address:  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2
Preface  
This manual is designed to assist users in setting up and using the LCD TV.  
Information in this document has been carefully checked for accuracy;  
however, no guarantee is given to the correctness of the contents. The  
information in this document is subject to change without notice.  
Copyright  
© Copyright 2003 Hannspree, Inc.  
All rights reserved. This product and related documentation are pro-  
tected by copyright and are distributed under licenses restricting their  
use, copying, and distribution. No part of this documentation may be  
reproduced in any form by any means without prior written authorization  
of Hannspree, Inc., and its licensors, if any.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
Description of Warning Symbols  
Warning  
Caution  
This symbol is used to remind  
users to pay attention to  
important descriptions regard-  
ing usage and maintenance  
(repair) or additional impor-  
tant information related to this  
product.  
This symbol is used to remind  
users to pay attention to the  
danger of electric shocks due  
to dangerous internal non-  
insulated components.  
Electric Power Notice  
Electric power may cause personal injury and mechanical damage if it is  
misused. Although safety has been taken into consideration during the  
design and production of this product, electric shock or fire can result  
when the product is misused. To prevent potential danger, follow the  
instructions below when installing, operating and cleaning the product.  
In addition, read the following “Safety Notices” carefully before using the  
product to ensure that your TV is safe and long-lasting.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4
Safety Notices  
Power Supply Safety Notes  
1. To avoid electric shocks, do not use an extended power cord or  
an outlet that does not match this product's plug or leaves the  
plug exposed.  
2. This product has a 3-pin grounded plug. The third pin connects  
to ground; do not remove it.  
3. If the power cord or plug is damaged or worn, unplug it immedi-  
ately and contact a qualified service technician for mainte-  
nance.  
4. To avoid fire or electric shocks, do not overload electric power  
outlets.  
Installation Safety Notes  
Antenna  
We suggest that you use an outdoor antenna to get the best signal  
possible unless you have cable TV or a centralized indoor antenna  
system. You may, however, use an antenna indoors if it is placed in  
a location free from interference.  
Location  
Avoid allowing the TV to get prolonged exposure to sunlight or  
other strong sources of heat. Leave sufficient distance between the  
TV and the wall to provide enough space for the emission of heat.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Before You Proceed  
1. Read the Safety Notices and the User’s Manual carefully  
before turning the product on.  
2. Keep your User’s Manual in a safe place for future reference.  
Keep the box and packaging in case the product needs to be  
shipped in the future.  
3. Follow the product and warning label instructions.  
4. Any changes or modifications that do not follow the instructions  
in this manual will void this product's warranty.  
Warning  
To reduce the risk of fire or electric shock, do not expose this  
product to rain or moisture.  
Power  
To avoid danger of fires or electric shock, make sure that you use a  
proper adapter. The TV is compatible with the following adapters:  
• EDAC POWER ELECTRONICS CO., LTD.: EA 1050E-120  
• LI SHIN INTERNATIONAL ENTERPRISE CORP.: 0217B1240  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optimal Viewing Distance  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any ventilation openings. Install  
in accordance with the manufacturer’s  
instructions.  
8. Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
9. Do not defeat the safety purpose of the  
polarized or grounding-type plug: A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade  
or the third prong are provided for your  
safety. If the provided plug does not fit into  
your outlet, consult an electrician for  
replacement of the obsolete outlet.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Protect the power cord from being walked on  
or pinched particularly at the plug, conve-  
nience receptacles, and the point where they  
exit from the apparatus.  
11. Use only with a cart, stand, tripod, bracket,  
or table specified by the manufacturer, or  
sold with the apparatus. When a cart is used,  
use caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
12. Only use attachments/accessories specified  
by the manufacturer.  
13. Unplug this apparatus during lightning  
storms or when unused for long periods of  
time.  
14. Refer all servicing to qualified service per-  
sonnel. Servicing is required when the appa-  
ratus has been damaged in any way, such as  
if the power-supply cord or plug is damaged,  
liquid has been spilled or objects have fallen  
into the apparatus, the apparatus has been  
exposed to rain or moisture, does not oper-  
ate normally, or has been dropped.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Personal Safety  
To avoid overloading the power supply, do not  
plug too many electrical devices into an outlet or  
extension cable.  
Dangerous high-voltage electric power compo-  
nents are located inside the TV. To avoid electric  
shock, do not disassemble the casing.  
Do not place or drop metals, small objects, or  
flammable materials in the vent to avoid an elec-  
tric shock or a fire.  
If the TV is dropped, falls down, or is otherwise  
damaged, unplug the power cord immediately  
and notify a qualified service technician.  
If any fluid is sprayed or dropped into the TV,  
remove the power plug immediately and notify a  
qualified service technician.  
The screen of the TV is made of glass, be care-  
ful to avoid hitting or scraping it. If the screen is  
broken, avoid cutting yourself on the broken  
glass.  
Do not allow children to use the TV unattended  
to avoid accidents caused by improper opera-  
tion.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
To avoid damage to power circuits, do not place  
the TV in locations where there is excessive  
steam or dust.  
Do not place the TV on a bed, sofa, carpet, or in  
a sealed cabinet to avoid blocking the product's  
vents.  
Install the outdoor antenna far from power trans-  
mission lines to avoid possible danger.  
Remove the power cord and antenna connector  
when there is a storm or when the TV is not in  
use for a long period to avoid electric shock from  
lightning.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
This product is designed for power sources as  
labeled on the casing. Avoid using any other  
power accessories to avoid electric shock or  
other damage.  
V
The plug can be inserted into an outlet in only  
one direction. Notify a qualified service techni-  
cian if you cannot plug it in correctly.  
If there is any problem that cannot be resolved  
according to the instructions given in this man-  
ual, notify a qualified service technician immedi-  
ately. Do not attempt any methods not covered in  
this manual.  
Maintenance  
Do not attempt to repair the TV by yourself.  
Notify a qualified service technician. Ask the ser-  
vice technician to complete a safety inspection  
before switching the power on after completing  
any maintenance.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Regulatory Information  
FCC Compliance Statement1  
This device complies with part 15 of the FCC Rules. Operation is sub-  
ject to the following two conditions: (1) This device may not cause harm-  
ful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC Rules. These lim-  
its are designed to provide reasonable protection against harmful inter-  
ference in a residential installation. This equipment generates, uses and  
can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be deter-  
mined by turning the equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected  
Consult the dealer or an experienced radio/TV technician for help  
Warning: A shielded-type power cord is required in order to meet FCC  
emission limits and also to prevent interference to nearby radio and tele-  
vision reception. It is essential that only the supplied power cord be  
used. Use only shielded cables to connect I/O devices to this equip-  
ment. You are cautioned that changes or modifications not expressly  
approved by the party responsible for compliance could void your  
authority to operate the equipment.  
1. applies only to products purchased in the United States of America  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DOC Compliance Notice1  
This digital apparatus does not exceed the Class B limits for radio noise  
emissions from digital apparatus as set out in the Radio Interference  
Regulations of the Canadian Department of Communications.This  
device complies with Canada ICES-003 Class B.  
CE Conformity Statement2  
This device complies with the requirements set out in the Council Direc-  
tive on the approximation of the Laws of the Member States relating to  
Electromagnetic Compatibility (89/336/EEC) and the Amendment Direc-  
tive (92/31/EEC), Low-Voltage Directive (73/23/EEC) and the Amend-  
ment Directive (93/68/EEC).  
1. applies only to products purchased in Canada  
2. applies only to products purchased in the European Union  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Introducing the TV  
Thank you for purchasing this Liquid  
Crystal Display TV. Your LCD TV is  
designed to be safe, versatile, and  
easy to use. The design of the prod-  
uct is based on trains, which makes  
it a fun addition to any room.  
EE  
P
XP  
X
R
R
E
E
S
S
D
E
K
S
H
/
/
You can watch broadcast or cable  
television channels, and easily con-  
nect a VCR, VCD, or DVD player or  
a game device to the standard RCA  
and S-Video input ports that are included in the 4-IN-1 cable.  
Convenient control buttons located on the front panel and a handy  
remote control let you change channels, adjust the volume, and  
change display settings through an easy-to-use on-screen display  
menu system. The built-in stereo speakers provide full, rich sound  
and a convenient audio output port lets you connect to an external  
audio system or headphones.  
Features  
• 9.6-inch color TFT LCD TV  
• Safe and sturdy construction  
• Built-in TV tuner  
• 4-IN-1 cable  
• On-Screen Display (OSD) menu system  
• Built-in 2W+2W speakers  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
7
Checking Package Contents  
Make sure the following components are included in the box. Contact  
your vendor immediately if anything is missing or damaged.  
TV  
The tapes on the corners of  
the screen protect the LCD  
during shipment. Peel them  
VOL  
off and discard them before  
CH  
MENU  
SOURCE  
using the TV.  
Warranty and  
Service Manual  
User’s Manual  
Quick Start Guide  
U
ser's M  
Quick Start  
G
anual  
uide  
W
a
rra  
nty  
m
an  
u
a
d
l
s
ervic  
e
a
n
Wire Material Package  
Power Cord  
Power Adapter  
4-IN-1 Cable  
RCA Jack x 3  
G
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
8
Getting to Know Your TV  
Front View  
1
Signal sensor  
VOL  
CH  
MENU  
SOURCE  
7
7
VOL  
4
5
CH  
MENU  
2
3
SOURCE  
6
Description  
Power LED  
Function  
1
2
Orange LED indicates power on.  

Changes channels. Press CH to  
increase the channel number. Press CH  
to decrease the channel number.  
Select channel  
3
4
Power  
Turns the TV on and off.  
Press VOL+ to increase the volume.  
Press VOL– to decrease the volume.  
Adjust volume  
Turns the On-Screen Display (OSD)  
menus on and off.  
5
Menu  
Selects the input source to be displayed  
(TV/CATV, AV, or S-Video).  
6
7
Source  
Stereo speakers  
Play audio content.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Input and Output Ports  
HEADPHONE  
4-IN-1  
DC 12V  
ANT  
HEADPHONE  
4-IN-1  
DC 12V  
ANT  
1
2
3
4
Description  
Function  
Connects to headphones or other  
audio device.  
1
2
HEADPHONE  
Connects to VCR/VCD/DVD player  
CVBS RCA cables or a game  
device.  
4-IN-1  
Connects to the included power  
adapter.  
3
4
DC 12V  
ANT  
Connects to an antenna or CATV  
cable television line.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
9
Getting Started  
Connecting to an Antenna or Cable TV  
1 Connect one end of the UHF or CATV cable to the ANT Jack  
(VHF/UHF IN Jack) on the back of the TV.  
2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to  
the antenna socket or CATV cable.  
Antenna  
HEADPHONE  
4-IN-1  
DC 12V  
ANT  
HEADPHONE  
4-IN-1  
DC 12V  
ANT  
Antenna/CATV  
socket  
ANT jack  
(VHF/UHF IN jack)  
Antenna/CATV  
coaxial cable  
Note  
If you cannot receive channels after connecting to an antenna or cable TV  
line, try scanning for channels. See “Auto Program” on page 44.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting to AV Devices  
Connect external devices such as a VCR, VCD or DVD player, or  
video game to the TV using the 4-IN-1 cable.  
Connecting to a VCR/VCD/DVD Player  
The illustration presented here shows how to connect the TV to a  
VCR and VCD or DVD player. Actual connections may vary accord-  
ing to the make and model of the device. Refer to the user’s manual  
included with the device for more detailed instructions.  
VCR  
VCD  
DVD  
HEADPHONE  
4-IN-1  
DC 12V  
ANT  
B R W Y  
HEADPHONE  
4-IN-1  
DC 12V  
ANT  
S-Video  
connector  
4-IN-1 cable  
4-IN-1 jack  
AV connectors  
Note  
The cables are color-coded (black, red, white, yellow). Connect each color-  
coded cable to the appropriate connector on your device.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting to a Video Camera  
The instructions presented here are a general guide to connecting  
the TV to a camcorder or other type of digital camera. Actual connec-  
tions may vary according to the make and model of the device. Refer  
to the user’s manual included with the camcorder or camera for more  
detailed instructions.  
S
WB  
HEADPHONE  
4-IN-1  
DC 12V  
ANT  
S-Video  
connector  
HEADPHONE  
4-IN-1  
DC 12V  
ANT  
B
R
W
Y
4-IN-1 jack  
4-IN-1 cable  
AV connectors  
Note  
The cables are color-coded (black, red, white, yellow). Connect each color-  
coded cable to the appropriate connector on your device.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting to a Game Device  
The instructions presented here are a general guide to connecting  
the TV to a game device using the RCA Jacks provided (some game  
devices may require a unique adapter that is not provided). Actual  
connections may vary according to the make and model of the game  
device. Refer to the user’s manual included with the game device for  
more detailed instructions.  
HEADPHONE  
4-IN-1  
DC 12V  
ANT  
B R W Y  
HEADPHONE  
4-IN-1  
DC 12V  
ANT  
S-Video  
connector  
4-IN-1 jack  
Notes  
4-IN-1 cable  
AV  
connectors  
• Connect the 4-IN-1 cable connectors to the corresponding connectors on  
your game device adapter.  
• If the 4-IN-1 cable does not fit the game device, then insert the included  
RCA jack between the 4-IN-1 cable and the game device.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting External Speakers or Headphones  
External speakers or headphones may be used to listen to the TV  
rather than using the built-in speakers. Connect external speakers or  
headphones to the headphone line out port as illustrated.  
Headphones  
HEADPHONE  
4-IN-1  
DC 12V  
ANT  
HEADPHONE  
4-IN-1  
DC 12V  
ANT  
Speakers  
Speaker/Headphone  
line out port  
Notes  
External speakers or headphones are not included with the product.  
The internal TV speakers will not output sound when headphones are  
plugged in.  
Use external speakers with amplifiers only.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting the Power Adapter  
1 Connect the power cord to the power adapter as illustrated.  
2 Plug the power adapter connector into the DC-IN input jack on the  
rear panel of the TV.  
3 Insert the three-pronged plug at the other end of the power cord into  
a power outlet.  
Power outlet  
Three-pronged  
plug  
HEADPHONE  
4-IN-1  
DC 12V  
ANT  
Power cord  
HEADPHONE  
4-IN-1  
DC 12V  
ANT  
DC-IN  
Power adapter  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
10  
Using the TV  
Using the Remote Control  
For best results, use the remote control within a distance of 5 meters  
from the front of the TV’s signal sensor. Do not exceed an angle of 30  
degrees when pointing at the signal sensor. Refer to the following  
illustration.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Turning the TV On and Off  
1 Press the POWER button on  
the remote control (or control  
panel). The train headlight  
TV: 10  
(power LED) changes from  
dark to orange, indicating that  
the power has been turned on.  
VOL  
CH  
MENU  
SOURCE  
2 Press the POWER button  
again; the power LED changes  
from orange to dark, indicating  
that the TV is in off mode.  
Train headlight  
(Power LED)  
Power button  
Selecting Channels  
Press the CH UP button and the  
CH DOWN button on the control  
panel to select the channel or  
enter the specific channel num-  
ber by pressing the number but-  
tons on the remote control.  
VOL  
CH  
MENU  
SOURCE  
Channel down  
Channel up  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Switching Source Signals  
Current source setting  
Press SOURCE on the remote  
control or control panel to  
select the incoming source sig-  
nal.  
S-VIDEO  
The current source setting  
(TV/CATV, S-Video, or AV)  
VOL  
CH  
MENU  
SOURCE  
SOURCE  
appears on the top left corner  
of the screen.  
Note  
The TV supports S-Video input in addition to normal video and audio sig-  
nals.  
Adjusting the Volume  
Press the VOL UP button to  
increase the volume. Press the  
VOL DOWN button to decrease  
the volume. The volume level is  
displayed on the TV.  
Volume level  
VOL  
MENU  
48  
Press MUTE on the remote con-  
trol to turn the sound off. Press  
MUTE on the remote control or  
press VOL UP\ VOL DOWN to  
turn the sound on.  
SOURCE  
Volume up  
Volume down  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Adjusting On-Screen Display (OSD)  
Settings  
11  
The On-Screen Display (OSD) menu system provides a quick and  
simple method to adjust your TV’s settings. This chapter describes  
how to change each of the available settings.  
The OSD can be used with either the remote control or the front con-  
trol panel.  
Button Descrptions  
Control Panel  
MENU  
MENU  
CH UP  

CHꢀ  
¸
CH DOWN  
ENTER  
CHꢁ  
MENU  
The following sections explain how to adjust settings in the OSD  
menus using the control panel.  
OSD Setting Menu  
Main Menu  
VOL  
ETO  
Video Setting  
CH  
MENU  
ENTER  
Press the MENU button to enter  
The Main Menu appears  
the OSD menus.  
Note  
To exit the OSD menus at any time, press the CH UP button or CH DOWN  
button to select Exit . Then press MENU to exit the OSD menus. Also,  
after you finish setting OSD parameters, follow these instructions to exit  
the OSD menus; alternatively, wait 15 seconds for the OSD to close auto-  
matically.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Brightness  
1 Press MENU to enter the OSD  
Main Menu  
menus.  
ETO  
Brightness  
2 Press the CH UP button or CH  
DOWN button to select Brightness.  
50  
3 Press MENU. The brightness slide  
ENTER  
bar appears.  
4 Press the CH UP button to increase  
the brightness.  
5 Press the CH DOWN button to  
decrease the brightness.  
6 Press MENU to confirm the setting  
and return to the Main menu.  
Notes  
The new setting is confirmed automatically  
when the OSD times out.  
MAX  
MID  
MIN  
BRIGHTNESS  
100  
50  
0
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Contrast  
1 Press MENU to enter the OSD  
Main Menu  
menus.  
ETO  
Contrast  
2 Press the CH UP button or CH  
DOWN button to select Contrast.  
50  
3 Press MENU. The contrast slide  
ENTER  
bar appears.  
4 Press the CH UP button to increase  
the contrast.  
5 Press the CH DOWN button to  
decrease the contrast.  
6 Press MENU to confirm the setting  
and return to the Main menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
MAX  
MID  
MIN  
CONTRAST  
100  
50  
0
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Video Setting  
Main Menu  
VOL  
ETO  
Video Setting  
CH  
MENU  
ENTER  
Press the MENU button to enter  
the OSD menus.  
1 Press the CH UP button or CH  
DOWN button to select Video  
Setting.  
2 Press MENU to enter the  
Video Setting menu.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Hue  
1 Press the CH UP button or CH  
DOWN button to select Hue.  
Video Setting  
G
R
B
Hue  
2 Press MENU to enter the Hue  
G
R
menu.  
50  
3 Press the CH UP button to increase  
the hue towards the red spectrum.  
The image becomes more red.  
ENTER  
4 Press the CH DOWN button to  
decrease the hue towards the  
green spectrum. The image  
becomes more green.  
5 Press MENU to confirm the setting  
and return to the Video Setting  
menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
MAX  
MID  
MIN  
HUE  
100  
50  
0
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Saturation  
1 Press the CH UP button or CH  
DOWN button to select Saturation.  
Video Setting  
G
R
B
Saturation  
2 Press MENU to enter the  
50  
Saturation menu.  
3 Press the CH UP button to increase  
the saturation. The screen image  
becomes more vibrant.  
ENTER  
4 Press the CH DOWN button to  
decrease the saturation. The  
screen image becomes less  
vibrant.  
5 Press MENU to confirm the setting  
and return to the Video Setting  
menu.  
Note  
The new setting is confirmed automati-  
cally when the OSD times out.  
MAX  
MID  
MIN  
SATURATION  
100  
50  
0
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sharpness  
1 Press the CH UP button or CH  
DOWN button to select Sharpness.  
Video Setting  
G
R
B
Sharpness  
2 Press MENU to enter the  
50  
Sharpness menu.  
3 Press the CH UP button to increase  
ENTER  
the sharpness.  
4 Press the CH DOWN button to  
decrease the sharpness.  
5 Press MENU again to confirm the  
setting and return to the Video Set-  
ting menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
MAX  
MID  
MIN  
SHARPNESS  
100  
50  
0
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Color Temperature  
1 Press the CH UP button or CH  
DOWN button to select Color.  
Video Setting  
G
R
B
Color  
2 Press MENU to enter the Color  
menu. The following three color  
temperatures are available.  
ENTER  
Standard Color  
Press the CH UP button or CH DOWN  
button to select Standard, then press  
MENU.  
Warm Color  
Press the CH UP button or CH DOWN  
button to select Warm, then press  
MENU.  
Cold Color  
Press the CH UP button or CH DOWN  
button to select Cold, then press MENU.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Audio Setting  
Main menu  
VOL  
ETO  
Audio Setting  
CH  
MENU  
ENTER  
Press the MENU button to enter  
the OSD menus.  
1 Press the CH UP button or CH  
DOWN button to select Audio  
Setting.  
2 Press MENU to enter the  
Audio Setting menu.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Treble  
1 Press the CH UP button or CH  
DOWN button to select Treble.  
Audio Setting  
Treble  
2 Press MENU to enter the Treble  
48  
menu.  
3 Press the CH UP button to increase  
ENTER  
the treble.  
4 Press the CH DOWN button to  
decrease the treble.  
5 Press MENU to confirm the setting  
and return to the Audio Setting  
menu.  
Note  
The new setting is confirmed automati-  
cally when the OSD times out.  
MAX  
MID  
MIN  
Treble  
100  
50  
0
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Bass  
1 Press the CH UP button or CH DOWN  
Audio Setting  
button to select Bass.  
Bass  
2 Press MENU to enter the Bass  
48  
menu.  
3 Press the CH UP button to increase  
ENTER  
the bass.  
4 Press the CH DOWN button to  
decrease the bass.  
5 Press MENU to confirm the setting  
and return to the Audio Setting  
menu.  
Note  
The new setting is confirmed automati-  
cally when the OSD times out.  
MAX  
MID  
MIN  
Bass  
100  
50  
0
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Balance  
1 Press the CH UP button or CH  
DOWN button to select Balance.  
Audio Setting  
Balance  
50  
2 Press MENU to enter the Balance  
L
R
menu.  
3 Press the CH DOWN button to shift  
ENTER  
the balance to the left speaker.  
4 Press the CH UP button to shift the  
balance to the right speaker.  
5 Press MENU to confirm the setting  
and return to the Audio Setting  
menu.  
Note  
The new setting is confirmed automatically  
when the OSD times out.  
MAX  
MID  
MIN  
Balance  
R (100)  
50  
L (0)  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TV Setting  
Main Menu  
VOL  
ETO  
TV Setting  
CH  
MENU  
ENTER  
Press the MENU button to enter  
the OSD menus.  
1 Press the CH UP button or CH  
DOWN button to select TV  
Setting.  
2 Press MENU to enter the TV  
Setting menu.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TV/CATV  
1 Press the CH UP button or CH  
DOWN button to select TV/CATV.  
TV Setting  
AUTO MENU  
SET SET  
Channel  
-
+
TV/CATV  
2 Press MENU to enter the TV/CATV  
menu. The following choices are  
available.  
CATV  
TV  
ENTER  
Receiving Broadcast TV  
TV Setting  
AUTO MENU  
SET SET  
Channel  
-
+
Press the CH UP button or CH DOWN  
button to select TV, then press MENU.  
TV/CATV  
CATV  
TV  
ENTER  
Receiving Cable TV  
TV Setting  
AUTO MENU  
SET SET  
Channel  
-
+
Press the CH UP button or CH DOWN  
button to select CATV (default), then  
press MENU.  
TV/CATV  
CATV  
TV  
ENTER  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
MTS  
1 Press the CH UP button or CH  
DOWN button to select MTS.  
TV Setting  
AUTO MENU  
SET SET  
Channel  
-
+
2 Press MENU to enter the MTS  
MTS  
menu.  
SAP DUAL  
MAIN  
ENTER  
MAIN  
TV Setting  
AUTO MENU  
SET SET  
Channel  
-
1 Press the CH UP button or CH  
DOWN button to select MAIN  
(default). MAIN is highlighted in  
red.  
+
MTS  
SAP DUAL  
MAIN  
2 Press MENU again to confirm the  
ENTER  
selection.  
SAP  
TV Setting  
AUTO MENU  
SET SET  
Channel  
-
+
1 Press the CH UP button or CH  
DOWN button to select SAP. SAP is  
highlighted in red.  
MTS  
SAP DUAL  
MAIN  
2 Press MENU again to confirm the  
selection.  
ENTER  
DUAL  
TV Setting  
AUTO MENU  
SET SET  
Channel  
-
+
1 Press the CH UP button or CH  
DOWN button to select DUAL.  
DUAL is highlighted in red.  
MTS  
SAP DUAL  
MAIN  
2 Press MENU to confirm the selec-  
tion.  
ENTER  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Auto Program  
1 Press the CH UP button or CH  
DOWN button to select Auto Pro-  
gram.  
TV Setting  
AUTO MENU  
SET SET  
Channel  
-
+
AUTO Program  
NO  
YES  
2 Press MENU to enter the Auto Pro-  
gram menu.  
ENTER  
3 Press the CH UP button or CH  
DOWN button to select Yes or No.  
4 Press MENU.  
The screen goes blank and the chan-  
nel indicator values range from 2 to  
69 (antenna connection) or from 1 to  
125 (CATV cable connection).  
Channel Indicator  
TV: 10  
The screen displays the first channel  
that is successfully found after scan-  
ning is complete.  
VOL  
CH  
MENU  
SOURCE  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Manual Program  
This function allows you to locate channels for adding to or erasing  
from preset channels.  
1 Press the CH UP button or CH  
TV Setting  
AUTO MENU  
SET SET  
Channel  
+-  
DOWN button to select Manual Pro-  
gram.  
Manual Program  
Up  
DOWN  
2 Press MENU to enter the Manual  
3
Program menu.  
ENTER  
3 Press the CH UP button or CH  
DOWN button to find the channel  
you want to add.  
4 When you have found the channel,  
press MENU.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Channel Add/Erase  
Channel to be added or erased must be selected from Manual  
Program.  
1 Press the CH UP button or CH  
TV Setting  
DOWN button to select CH.  
AUTO MENU  
SET SET  
Channel  
-
+
Add/Erase.  
CH.Add/Erase  
2 Press MENU to enter the CH.  
Add/Erase menu. Select one of the  
following options.  
Add  
Erase  
3
ENTER  
Add Channel  
1 Press the CH UP button to select  
Add.  
2 Press the MENU to add the  
selected channel.  
Erase Channel  
1 Press the CH DOWN button to  
select Erase.  
2 Press MENU to delete the selected  
channel.  
When you return to the normal TV  
screen and use the CH UP button or  
CH DOWN button to browse chan-  
nels, the deleted channel (for exam-  
ple, Channel 3) is skipped  
automatically.  
Note  
You can still access the deleted channel  
by entering the channel number using  
the number buttons on the remote con-  
trol.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Miscellaneous Setting  
Main Menu  
VOL  
ETO  
Miscellaneous  
CH  
MENU  
ENTER  
Press the MENU button to enter  
the OSD menus.  
1 Press the CH UP button or CH  
DOWN button to select  
Miscellaneous.  
2 Press MENU to enter the  
Miscellaneous menu.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Position  
1 Press the CH UP button or CH  
DOWN button to select OSD  
Position.  
OSD Position  
OSD  
OSD  
H - P o s i t i o n  
50  
2 Press MENU to enter the OSD  
Position menu.  
ENTER  
The following options are available.  
Horizontal Position  
1 Press the CH UP button or CH  
DOWN button to select H. Position.  
OSD Position  
OSD  
OSD  
H - P o s i t i o n  
48  
2 Press MENU.  
ENTER  
3 Press the CH DOWN button to  
move the OSD screen to the left.  
Press the CH UP button to move  
the OSD screen to the right.  
4 Press MENU to confirm the setting.  
Vertical Position  
1 Press the CH UP button or CH  
DOWN button to select V. Position.  
OSD Position  
OSD  
OSD  
V- P o s i t i o n  
2 Press MENU.  
48  
3 Press the CH DOWN button to  
move the OSD screen downward.  
Press the CH UP button to move  
the OSD screen upward.  
ENTER  
4 Press MENU to confirm the setting.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Language  
1 Press the CH UP button or CH  
DOWN button to select Language.  
Miscellaneous  
Z
CH  
Z
OSD  
Z
Language  
English  
2 Press MENU to enter the Language  
menu.  
ᕷᥟύЎ  
The screen displays the available  
OSD languages: English and  
T-Chinese (Traditional Chinese).  
ENTER  
3 Press the CH UP button or CH  
DOWN button to select a language.  
Miscellaneous  
Z
CH  
Z
Z
OSD  
Language  
English  
4 Press MENU to confirm your  
ᕷᥟύЎ  
choice.  
ENTER  
Note  
The default language setting is Tradi-  
tional Chinese.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sleep Timer  
The sleep timer turns the TV off automatically after a set period of  
time.  
1 Press the CH UP button or CH  
Miscellaneous  
Z
Z
DOWN button to select Sleep.  
CH  
Z
OSD  
Sleep  
2 Press MENU to enter the Sleep  
30 60 90 120  
OFF  
menu.  
3 The screen displays the available  
ENTER  
sleep timer setting:  
– Off  
– 30 minutes  
– 60 minutes  
– 90 minutes  
– 120 minutes  
4 Press the CH UP button or CH  
DOWN button to select a setting.  
Miscellaneous  
Z
CH  
Z
Z
OSD  
Sleep  
5 Press MENU to confirm your  
30 60 90 120  
OFF  
choice.  
ENTER  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
OSD Display  
This setting allows you to set whether information such as the  
selected channel is shown on the TV screen when the DISPLAY  
button is pressed.  
1 Press the CH UP button or CH  
Miscellaneous  
Z
Z
DOWN button to select OSD  
CH  
Z
OSD  
OSD Display  
Display.  
Off  
On  
2 Press MENU to enter the OSD  
Display menu.  
ENTER  
3 Press the CH UP button or CH  
DOWN button to select On or Off.  
4 Press MENU to confirm your  
choice.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Reset  
The Reset function returns all of your TV’s user settings to their fac-  
tory defaults.  
Warning:  
The reset function will erase all of your custom and favorite channel  
settings, and will reset all display settings (such as contrast, bright-  
ness, etc.) to the factory default values. The reset function cannot be  
reversed once it begins.  
1 Press the CH UP button or CH  
Miscellaneous  
Z
Z
DOWN button to select Reset.  
CH  
Z
OSD  
Reset  
2 Press MENU to enter the Reset  
No  
Yes  
menu.  
3 Press the CH UP button or CH  
DOWN button to select Yes or No.  
By default, No is already selected  
(highlighted in red).  
ENTER  
4 Press MENU to confirm your  
choice.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
12  
Taking Care of Your TV  
Turn the power off before you begin cleaning the  
TV.  
For best results, use a clean lens cloth to  
remove dust and fingerprints from the screen.  
Do not wipe the shell of the TV with alcohol,  
methanol, gasoline or oil products to avoid dam-  
aging the finish. Wipe the shell with a dry soft  
cloth and use neutral cleaning fluids.  
GAS  
OIL  
If your model has leather components, wipe the  
leather parts with a dry cloth and keep the area  
dry. Place the TV far from sources of steam to  
avoid making the leather wet.  
Be careful to remove the power plug correctly.  
Hold the plug instead of pulling the power cord.  
Arrange the power cord with other cords to avoid  
knotting or bending which may cause fire due to  
damage or electric leakage.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
13  
Troubleshooting  
Situation  
Solution  
Connect the power cord properly.  
Press the POWER button on the control  
panel or remote control.  
Press the SOURCE button to cycle through  
connected video sources.  
No picture and sound.  
Press the CH UP or CH DOWN button to  
switch to other TV stations.  
Check the TV/CATV OSD settings. See  
Make sure all cables are connected properly.  
Check the antenna and cable connections.  
Adjust the brightness in the OSD menus. See  
No picture, or poor picture, sound is  
OK.  
Adjust the saturation in the OSD menus. See  
Picture is not in color.  
Press the VOL UP button on the control panel  
or remote control.  
Make sure the MTS option is set to Main or  
Picture is OK, no sound.  
Adjust the balance in the OSD menus. See  
One of the speakers has no sound.  
Try the Auto Program function in the OSD “TV  
Setting” menu. See “Auto Program” on  
Can’t receive some TV channels using  
cable TV.  
Want to reset TV settings.  
Cannot operate menus.  
Use the Reset function in the OSD menu.  
If OSD items are colored light blue, the sys-  
tem is in a state such that those settings are  
not available. For example, video setting is  
available in TV mode.  
Make sure the video signal cable is con-  
nected properly.  
No image but have sound.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Situation  
Solution  
Make sure the source device is functioning  
properly.  
Set the volume to a higher level.  
Make sure the audio cable is connected  
securely.  
No sound but have image.  
Turn the mute off.  
Make sure the video signal cable is con-  
nected properly.  
Screen image turns over.  
Adjust the location of the antenna, placing it  
far from roads or sources of interference.  
Check the antenna and the video signal line  
connections.  
Snow appears on the screen.  
Readjust the sharpness setting.  
Choose programs with high quality signals.  
Adjust the direction of the antenna or change  
the video signal cable.  
Blurred or overlapped images.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Specifications  
K209-10A1  
LCD Panel Size  
Aspect Ratio  
9.6-inch TFT  
4:3  
Best Resolution  
Maximum Display Area  
TV System  
800 (horizontal) x 600 (vertical)  
194.4 mm (H) x 145.8 mm (W)  
NTSC  
S-Video Input and Composite Video Input (through the  
4-IN-1 cable)  
Video System  
Audio System  
Input: RCA Jack (L/R Audio Input through the 4-IN-1  
cable)  
Output: 3.5mm ø headphone jack x 1  
Built-in Speakers  
2W + 2W  
Power Supply  
100-240V, 50/60 Hz, 12V DC  
42W (Average)  
Power Consumption  
Power Consumption (Standby)  
Optional Accessories  
Weight (including base)  
Dimensions (including base)  
0.9W Maximum  
External Speakers  
3.5 kg  
318 mm (H) x 408 mm (W) x 125 mm (D)  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
15  
Glossary  
Aspect Ratio The ratio of width to height of a film, image or display screen.  
Broadcast TV Broadcasting video signals using high-frequency electromagnetic  
waves to distribute television channels to viewers (standard TV broadcast).  
CATV Community Antenna Television, the original name for cable TV. A television  
distribution system that uses coaxial cable instead of the traditional radio broad-  
casting (over-the-air) method to deliver television, FM radio, and other services to  
consumers.  
Color Temperature Adjusting the color temperature enables you to set the inten-  
sity of white light. Color temperature is measured in Kelvin (K). Higher color tem-  
peratures result in a blue tint. Lower temperatures result in a red tint.  
DUAL Used with SAP and NTSC, enables broadcast of the main broadcast signal  
on one speaker, and the alternate audio speaker on the other speaker.  
Hue Colors in a color system are measured by hue, saturation and luminance.  
Hue indicates the predominant color.  
LCD Liquid Crystal Display. A display technology that uses rod-shaped molecules  
(liquid crystals) that flow like liquid and bend light.  
Main is the default audio signal belonging to a particular channel.  
MTS Multi-channel Television Sound. Enables reception of audio other than the  
primary (MAIN) audio signal. DUAL enables reception of a stereo audio signal,  
while SAP (Second Audio Program) enables reception of a separate channel that  
may be a different language or completely different information such as the news.  
RCA connector An RCA or phono connector is a plug and socket for a two-wire  
(signal and ground) coaxial cable that is widely used to connect audio and video  
components. RCA sockets are commonly found at the rear of audiovisual equip-  
ment.  
RCA jack An RCA jack enables you to attach the 4-IN-1 cable to a device socket.  
SAP (Secondary Audio Program) is an audio channel used with the NTSC TV  
standard for auxiliary transmission of such items as foreign language broadcasting  
or teletext.  
Saturation Chromatic purity indicating the amount of white contained in a color.  
Fully saturated colors are pure colors; less saturated colors appear as pastel  
shades.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
S-Video Super-video, a video cabling standard used to transmit video by keeping  
brightness (Y) and color information (C) on separate channels. Most often used  
with camcorders, VCRs, and quality receivers and amplifiers to provide sharper pic-  
tures.  
VCD A compact disk format developed in 1993 by Sony and Philips to capture full-  
motion video. A standard Video CD can hold 74 minutes of near VHS-quality video  
and CD-quality sound.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Stroller 1762856 User Manual
Grizzly Router T10432 User Manual
Harbor Freight Tools Laser Level 90980 User Manual
Harbor Freight Tools Marine Instruments 94873 User Manual
Hoshizaki Refrigerator 71227 User Manual
Hotpoint Range SBS 638 CX S User Manual
Hotpoint Washer WT640 User Manual
Huawei Recording Equipment MG323 User Manual
Huffy Board Games In Ground Basketball User Manual
Husqvarna Snow Blower 16530 EXL User Manual